Debian Debian-France Debian-Facile Debian-fr.org Debian-fr.xyz Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 26-06-2022 19:12:39

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Bonjour à la communauté,

Je viens de réussir, grâce à la communauté tout de même, de faire fonctionner mon imprimante Ricoh Aficio SP 1000S. Maintenant, je souhaite que la fonction scan soit opérationnelle. c'est pourquoi je sollicite votre aide.

Quelques manipulations effectuées, mais sans résultat:

Tentative installation scan :

test avec gscan2pdf v2,11,0 et Xsane sans résultat.

Autre action
zemog@zemogcoolermaster:~$ lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
Bus 003 Device 002: ID 093a:2532 Pixart Imaging, Inc. Gaming Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0b0e:245e GN Netcom Jabra Link 370
Bus 001 Device 002: ID 079b:005f Sagem Laser Pro LL
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@zemogcoolermaster:~# sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x079b [MFPrinter ], product=0x005f [Laser Pro LL]) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
root@zemogcoolermaster:~# scanimage -L
Created directory: /var/lib/snmp/cert_indexes

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

root@zemogcoolermaster:~# scanimage --list-devices

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x079b [MFPrinter ], product=0x005f [Laser Pro LL]) at libusb:001:004
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

root@zemogcoolermaster:~# ls -l /dev/bus/usb/*/*
crw-rw-r-- 1 root root 189,   0 25 juin  17:27 /dev/bus/usb/001/001
crw-rw-r-- 1 root root 189,   2 25 juin  17:27 /dev/bus/usb/001/003
crw-rw-r-- 1 root lp   189,   3 25 juin  17:38 /dev/bus/usb/001/004
crw-rw-r-- 1 root root 189, 128 25 juin  17:27 /dev/bus/usb/002/001
crw-rw-r-- 1 root root 189, 256 25 juin  17:27 /dev/bus/usb/003/001
crw-rw-r-- 1 root root 189, 257 25 juin  17:27 /dev/bus/usb/003/002
crw-rw-r-- 1 root root 189, 258 25 juin  17:27 /dev/bus/usb/003/003
crw-rw-r-- 1 root root 189, 384 25 juin  17:27 /dev/bus/usb/004/001
crw-rw-r-- 1 root root 189, 512 25 juin  17:27 /dev/bus/usb/005/001
crw-rw-r-- 1 root root 189, 640 25 juin  17:27 /dev/bus/usb/006/001

zemog (en avance sur son temps, mais en retard sur l'équipement) merci.gif

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#2 29-06-2022 17:00:42

èfpé
Membre
Inscription : 10-07-2016

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Bonjour zemog,

zemog a écrit :

lsusb

Bus 001 Device 002: ID 079b:005f Sagem Laser Pro LL


Tiens c'est étrange, ce sont les mêmes identifiants USB que ceux de ton fil ouvert en octobre 2017.

lsusb -vd 079b:005f


Ricoh Aficio SP 1000S/F et Sagem MF 5461 se ressemblent 'étrangement', mais peux-tu confirmer ?

Hors ligne

#3 29-06-2022 23:55:52

gtalbot
Invité

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Emilio,

Je mets ici l'information sur ton numériseur provenant
de l'autre fil de discussion

zemog a écrit :


emog@zemogcoolermaster:~$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).



As-tu installé le paquet sane?

Que donnes en user xsane?

Gérard

#4 01-07-2022 21:17:32

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

bonsoir j'essaie de revenir sur le fil correspondant. c'est pourquoi je remet ce que je viens d'envoyer sur le fil initial.

voici les commandes exécutes ce soir pour répondre à vos interrogations.

zemog@zemogcoolermaster:~$ groups
zemog cdrom floppy audio dip video plugdev netdev bluetooth scanner
(donc le scanner apparaît)

j’ai tenté les deux approches conseillées auxquelles rien je ne comprends:

zemog@zemogcoolermaster:~$ SANE_DEBUG_DLL=4 scanimage -L
[21:05:37.726844] [sanei_debug] Setting debug level of dll to 4.
[21:05:37.726921] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.31-debian
[21:05:37.726952] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[21:05:37.726974] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[21:05:37.726994] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[21:05:37.727047] [dll] add_backend: adding backend `net'
[21:05:37.727062] [dll] add_backend: adding backend `abaton'
[21:05:37.727078] [dll] add_backend: adding backend `agfafocus'
[21:05:37.727095] [dll] add_backend: adding backend `apple'
[21:05:37.727112] [dll] add_backend: adding backend `artec'
[21:05:37.727125] [dll] add_backend: adding backend `artec_eplus48u'
[21:05:37.727140] [dll] add_backend: adding backend `as6e'
[21:05:37.727159] [dll] add_backend: adding backend `avision'
[21:05:37.727174] [dll] add_backend: adding backend `bh'
[21:05:37.727187] [dll] add_backend: adding backend `canon'
[21:05:37.727205] [dll] add_backend: adding backend `canon630u'
[21:05:37.727222] [dll] add_backend: adding backend `canon_dr'
[21:05:37.727237] [dll] add_backend: adding backend `canon_lide70'
[21:05:37.727253] [dll] add_backend: adding backend `cardscan'
[21:05:37.727267] [dll] add_backend: adding backend `coolscan'
[21:05:37.727281] [dll] add_backend: adding backend `coolscan3'
[21:05:37.727299] [dll] add_backend: adding backend `dell1600n_net'
[21:05:37.727315] [dll] add_backend: adding backend `dmc'
[21:05:37.727331] [dll] add_backend: adding backend `epjitsu'
[21:05:37.727346] [dll] add_backend: adding backend `epson2'
[21:05:37.727361] [dll] add_backend: adding backend `epsonds'
[21:05:37.727376] [dll] add_backend: adding backend `escl'
[21:05:37.727392] [dll] add_backend: adding backend `fujitsu'
[21:05:37.727408] [dll] add_backend: adding backend `genesys'
[21:05:37.727424] [dll] add_backend: adding backend `gt68xx'
[21:05:37.727441] [dll] add_backend: adding backend `hp'
[21:05:37.727457] [dll] add_backend: adding backend `hp3500'
[21:05:37.727471] [dll] add_backend: adding backend `hp3900'
[21:05:37.727485] [dll] add_backend: adding backend `hp4200'
[21:05:37.727500] [dll] add_backend: adding backend `hp5400'
[21:05:37.727516] [dll] add_backend: adding backend `hp5590'
[21:05:37.727531] [dll] add_backend: adding backend `hpljm1005'
[21:05:37.727548] [dll] add_backend: adding backend `hpsj5s'
[21:05:37.727564] [dll] add_backend: adding backend `hs2p'
[21:05:37.727586] [dll] add_backend: adding backend `ibm'
[21:05:37.727603] [dll] add_backend: adding backend `kodak'
[21:05:37.727619] [dll] add_backend: adding backend `kodakaio'
[21:05:37.727637] [dll] add_backend: adding backend `kvs1025'
[21:05:37.727652] [dll] add_backend: adding backend `kvs20xx'
[21:05:37.727669] [dll] add_backend: adding backend `kvs40xx'
[21:05:37.727684] [dll] add_backend: adding backend `leo'
[21:05:37.727700] [dll] add_backend: adding backend `lexmark'
[21:05:37.727716] [dll] add_backend: adding backend `ma1509'
[21:05:37.727733] [dll] add_backend: adding backend `magicolor'
[21:05:37.727750] [dll] add_backend: adding backend `matsushita'
[21:05:37.727767] [dll] add_backend: adding backend `microtek'
[21:05:37.727782] [dll] add_backend: adding backend `microtek2'
[21:05:37.727798] [dll] add_backend: adding backend `mustek'
[21:05:37.727814] [dll] add_backend: adding backend `mustek_usb'
[21:05:37.727831] [dll] add_backend: adding backend `mustek_usb2'
[21:05:37.727846] [dll] add_backend: adding backend `nec'
[21:05:37.727861] [dll] add_backend: adding backend `niash'
[21:05:37.727878] [dll] add_backend: adding backend `pie'
[21:05:37.727894] [dll] add_backend: adding backend `pieusb'
[21:05:37.727910] [dll] add_backend: adding backend `pint'
[21:05:37.727930] [dll] add_backend: adding backend `pixma'
[21:05:37.727946] [dll] add_backend: adding backend `plustek'
[21:05:37.727968] [dll] add_backend: adding backend `qcam'
[21:05:37.727985] [dll] add_backend: adding backend `ricoh'
[21:05:37.728003] [dll] add_backend: adding backend `ricoh2'
[21:05:37.728019] [dll] add_backend: adding backend `rts8891'
[21:05:37.728035] [dll] add_backend: adding backend `s9036'
[21:05:37.728052] [dll] add_backend: adding backend `sceptre'
[21:05:37.728068] [dll] add_backend: adding backend `sharp'
[21:05:37.728085] [dll] add_backend: adding backend `sm3600'
[21:05:37.728102] [dll] add_backend: adding backend `sm3840'
[21:05:37.728118] [dll] add_backend: adding backend `snapscan'
[21:05:37.728135] [dll] add_backend: adding backend `sp15c'
[21:05:37.728153] [dll] add_backend: adding backend `tamarack'
[21:05:37.728171] [dll] add_backend: adding backend `teco1'
[21:05:37.728187] [dll] add_backend: adding backend `teco2'
[21:05:37.728201] [dll] add_backend: adding backend `teco3'
[21:05:37.728219] [dll] add_backend: adding backend `u12'
[21:05:37.728234] [dll] add_backend: adding backend `umax'
[21:05:37.728249] [dll] add_backend: adding backend `umax1220u'
[21:05:37.728266] [dll] add_backend: adding backend `v4l'
[21:05:37.728281] [dll] add_backend: adding backend `xerox_mfp'
[21:05:37.728320] [dll] sane_get_devices
[21:05:37.728336] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.728353] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:05:37.728376] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:05:37.728627] [dll] init: initializing backend `xerox_mfp'
[21:05:37.736361] [dll] init: backend `xerox_mfp' is version 1.0.13
[21:05:37.736554] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.736577] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[21:05:37.736610] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[21:05:37.736631] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[21:05:37.736655] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[21:05:37.736700] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[21:05:37.736720] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[21:05:37.736733] [dll] load: couldn't find backend `v4l' (No such file or directory)
[21:05:37.736748] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.736763] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:05:37.736784] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:05:37.737050] [dll] init: initializing backend `umax1220u'
[21:05:37.737170] [dll] init: backend `umax1220u' is version 1.0.2
[21:05:37.737190] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.737203] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:05:37.737222] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:05:37.737479] [dll] init: initializing backend `umax'
[21:05:37.738798] [dll] init: backend `umax' is version 1.0.45
[21:05:37.738823] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.738838] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:05:37.738862] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:05:37.739068] [dll] init: initializing backend `u12'
[21:05:37.739209] [dll] init: backend `u12' is version 1.0.0
[21:05:37.739225] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.739237] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:05:37.739253] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:05:37.739370] [dll] init: initializing backend `teco3'
[21:05:37.739766] [dll] init: backend `teco3' is version 1.0.1
[21:05:37.739783] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.739795] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:05:37.739811] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:05:37.739927] [dll] init: initializing backend `teco2'
[21:05:37.740554] [dll] init: backend `teco2' is version 1.0.10
[21:05:37.740569] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.740580] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:05:37.740595] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:05:37.740722] [dll] init: initializing backend `teco1'
[21:05:37.741128] [dll] init: backend `teco1' is version 1.0.10
[21:05:37.741144] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.741154] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:05:37.741169] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:05:37.741290] [dll] init: initializing backend `tamarack'
[21:05:37.741483] [dll] init: backend `tamarack' is version 1.0.0
[21:05:37.741498] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.741509] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:05:37.741524] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:05:37.741640] [dll] init: initializing backend `sp15c'
[21:05:37.741730] [dll] init: backend `sp15c' is version 1.0.0
[21:05:37.741745] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.741755] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:05:37.741769] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:05:37.741944] [dll] init: initializing backend `snapscan'
[21:05:37.742265] [dll] init: backend `snapscan' is version 1.4.53
[21:05:37.742281] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.742291] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:05:37.742306] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:05:37.742455] [dll] init: initializing backend `sm3840'
[21:05:37.742520] [dll] init: backend `sm3840' is version 1.0.0
[21:05:37.742533] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.742543] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:05:37.742559] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:05:37.742707] [dll] init: initializing backend `sm3600'
[21:05:37.742775] [dll] init: backend `sm3600' is version 1.0.6
[21:05:37.742790] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.742804] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:05:37.742826] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:05:37.742965] [dll] init: initializing backend `sharp'
[21:05:37.743209] [dll] init: backend `sharp' is version 1.0.0
[21:05:37.743227] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.743241] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:05:37.743261] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:05:37.743417] [dll] init: initializing backend `sceptre'
[21:05:37.743729] [dll] init: backend `sceptre' is version 1.0.10
[21:05:37.743769] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.743791] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:05:37.743826] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:05:37.743995] [dll] init: initializing backend `s9036'
[21:05:37.744221] [dll] init: backend `s9036' is version 1.0.0
[21:05:37.744245] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.744263] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:05:37.744286] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:05:37.744570] [dll] init: initializing backend `rts8891'
[21:05:37.744737] [dll] init: backend `rts8891' is version 1.0.2401
[21:05:37.744836] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.744853] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:05:37.744875] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:05:37.745081] [dll] init: initializing backend `ricoh2'
[21:05:37.745166] [dll] init: backend `ricoh2' is version 1.0.0
[21:05:37.745183] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.745199] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:05:37.745221] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:05:37.745368] [dll] init: initializing backend `ricoh'
[21:05:37.745567] [dll] init: backend `ricoh' is version 1.0.0
[21:05:37.745588] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.745604] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:05:37.745626] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:05:37.745767] [dll] init: initializing backend `qcam'
[21:05:37.745815] [dll] init: backend `qcam' is version 1.0.0
[21:05:37.745832] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.745847] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:05:37.745868] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:05:37.746109] [dll] init: initializing backend `plustek'
[21:05:37.746499] [dll] init: backend `plustek' is version 1.0.0
[21:05:37.746520] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.746535] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:05:37.746557] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:05:37.746863] [dll] init: initializing backend `pixma'
[21:05:37.746984] [dll] init: backend `pixma' is version 1.0.28
[21:05:38.268545] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.268596] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[21:05:38.268622] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[21:05:38.268637] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[21:05:38.268652] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[21:05:38.268665] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[21:05:38.268730] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[21:05:38.268744] [dll] load: couldn't find backend `pint' (No such file or directory)
[21:05:38.268758] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.268771] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:05:38.268795] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:05:38.269157] [dll] init: initializing backend `pieusb'
[21:05:38.269286] [dll] init: backend `pieusb' is version 1.0.1
[21:05:38.269303] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.269315] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:05:38.269333] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:05:38.269494] [dll] init: initializing backend `pie'
[21:05:38.269891] [dll] init: backend `pie' is version 1.0.9
[21:05:38.269914] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.269929] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:05:38.269947] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:05:38.270133] [dll] init: initializing backend `niash'
[21:05:38.270212] [dll] init: backend `niash' is version 1.0.1
[21:05:38.270228] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.270242] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:05:38.270261] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:05:38.270399] [dll] init: initializing backend `nec'
[21:05:38.270580] [dll] init: backend `nec' is version 1.0.0
[21:05:38.270598] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.270613] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:05:38.270631] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:05:38.270819] [dll] init: initializing backend `mustek_usb2'
[21:05:38.270848] [dll] init: backend `mustek_usb2' is version 1.0.10
[21:05:38.270915] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.270929] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:05:38.270951] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:05:38.271133] [dll] init: initializing backend `mustek_usb'
[21:05:38.271250] [dll] init: backend `mustek_usb' is version 1.0.18
[21:05:38.271267] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.271280] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:05:38.271297] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:05:38.271556] [dll] init: initializing backend `mustek'
[21:05:38.272026] [dll] init: backend `mustek' is version 1.0.138
[21:05:38.272049] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.272060] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:05:38.272077] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:05:38.272228] [dll] init: initializing backend `microtek2'
[21:05:38.272481] [dll] init: backend `microtek2' is version 1.0.0
[21:05:38.272506] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.272520] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:05:38.272542] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:05:38.272695] [dll] init: initializing backend `microtek'
[21:05:38.272940] [dll] init: backend `microtek' is version 1.0.0
[21:05:38.272958] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.272973] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:05:38.272991] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:05:38.273128] [dll] init: initializing backend `matsushita'
[21:05:38.273607] [dll] init: backend `matsushita' is version 1.0.7
[21:05:38.273626] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.273636] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:05:38.273652] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:05:38.277480] [dll] init: initializing backend `magicolor'
[21:05:38.277583] [dll] init: backend `magicolor' is version 1.0.1
[21:05:39.781165] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.781211] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:05:39.781251] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:05:39.781584] [dll] init: initializing backend `ma1509'
[21:05:39.781731] [dll] init: backend `ma1509' is version 1.0.3
[21:05:39.781750] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.781766] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:05:39.781793] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:05:39.782014] [dll] init: initializing backend `lexmark'
[21:05:39.782153] [dll] init: backend `lexmark' is version 1.0.32
[21:05:39.782259] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.782276] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:05:39.782299] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:05:39.782462] [dll] init: initializing backend `leo'
[21:05:39.782860] [dll] init: backend `leo' is version 1.0.11
[21:05:39.782886] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.782905] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:05:39.782933] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:05:39.783176] [dll] init: initializing backend `kvs40xx'
[21:05:39.783273] [dll] init: backend `kvs40xx' is version 1.0.1
[21:05:39.783500] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.783519] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:05:39.783545] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:05:39.783774] [dll] init: initializing backend `kvs20xx'
[21:05:39.783870] [dll] init: backend `kvs20xx' is version 1.0.2
[21:05:39.784304] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.784326] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:05:39.784355] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:05:39.784621] [dll] init: initializing backend `kvs1025'
[21:05:39.784783] [dll] init: backend `kvs1025' is version 1.0.5
[21:05:39.784802] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.784818] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:05:39.784845] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:05:39.786908] [dll] init: initializing backend `kodakaio'
[21:05:39.787004] [dll] init: backend `kodakaio' is version 1.0.3
[21:05:41.713818] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.713858] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:05:41.713886] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:05:41.714156] [dll] init: initializing backend `kodak'
[21:05:41.714183] [dll] init: backend `kodak' is version 1.0.7
[21:05:41.714333] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.714351] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:05:41.714371] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:05:41.714526] [dll] init: initializing backend `ibm'
[21:05:41.714706] [dll] init: backend `ibm' is version 1.0.0
[21:05:41.714724] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.714738] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:05:41.714755] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:05:41.714902] [dll] init: initializing backend `hs2p'
[21:05:41.715146] [dll] init: backend `hs2p' is version 1.0.0
[21:05:41.715165] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.715178] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:05:41.715195] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:05:41.715339] [dll] init: initializing backend `hpsj5s'
[21:05:41.715395] [dll] init: backend `hpsj5s' is version 1.0.3
[21:05:41.715409] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.715423] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:05:41.715442] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:05:41.715644] [dll] init: initializing backend `hpljm1005'
[21:05:41.715731] [dll] init: backend `hpljm1005' is version 1.0.1
[21:05:41.715746] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.715760] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:05:41.715780] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:05:41.715973] [dll] init: initializing backend `hp5590'
[21:05:41.716050] [dll] init: backend `hp5590' is version 1.0.8
[21:05:41.716067] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.716082] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:05:41.716104] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:05:41.716291] [dll] init: initializing backend `hp5400'
[21:05:41.716392] [dll] init: backend `hp5400' is version 1.0.3
[21:05:41.716410] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.716423] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:05:41.716442] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:05:41.716636] [dll] init: initializing backend `hp4200'
[21:05:41.716759] [dll] init: backend `hp4200' is version 1.0.0
[21:05:41.716777] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.716790] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:05:41.716809] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:05:41.717545] [dll] init: initializing backend `hp3900'
[21:05:41.717661] [dll] init: backend `hp3900' is version 1.0.0
[21:05:41.717678] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.717691] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:05:41.717708] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:05:41.717909] [dll] init: initializing backend `hp3500'
[21:05:41.717985] [dll] init: backend `hp3500' is version 1.0.0
[21:05:41.718005] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.718019] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:05:41.718040] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:05:41.718308] [dll] init: initializing backend `hp'
[21:05:41.718341] [dll] init: backend `hp' is version 1.0.8
[21:05:41.718673] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.718694] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:05:41.718714] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:05:41.718924] [dll] init: initializing backend `gt68xx'
[21:05:41.719114] [dll] init: backend `gt68xx' is version 1.0.84
[21:05:41.719274] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.719290] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:05:41.719309] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:05:41.720412] [dll] init: initializing backend `genesys'
[21:05:41.721376] [dll] init: backend `genesys' is version 1.0.0
[21:05:41.721511] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.721527] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:05:41.721545] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:05:41.721767] [dll] init: initializing backend `fujitsu'
[21:05:41.721798] [dll] init: backend `fujitsu' is version 1.0.136
[21:05:41.722022] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.722040] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:05:41.722059] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:05:41.743002] [dll] init: initializing backend `escl'
[21:05:41.743146] [dll] init: backend `escl' is version 1.0.0
[21:05:42.759252] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:42.759294] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:05:42.759324] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:05:42.759762] [dll] init: initializing backend `epsonds'
[21:05:42.759858] [dll] init: backend `epsonds' is version 1.0.0
[21:05:42.759913] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:42.759928] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:05:42.759948] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:05:42.760226] [dll] init: initializing backend `epson2'
[21:05:42.760306] [dll] init: backend `epson2' is version 1.0.124
[21:05:43.761621] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:43.761667] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:05:43.761695] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:05:43.762041] [dll] init: initializing backend `epjitsu'
[21:05:43.762067] [dll] init: backend `epjitsu' is version 1.0.31
[21:05:43.762191] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:43.762207] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:05:43.762224] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:05:43.762380] [dll] init: initializing backend `dmc'
[21:05:43.762588] [dll] init: backend `dmc' is version 1.0.0
[21:05:43.762606] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:43.762619] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:05:43.762637] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:05:43.762841] [dll] init: initializing backend `dell1600n_net'
[21:05:43.762861] [dll] init: backend `dell1600n_net' is version 1.0.0
[21:05:44.063725] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.063776] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:05:44.063807] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:05:44.064173] [dll] init: initializing backend `coolscan3'
[21:05:44.064270] [dll] init: backend `coolscan3' is version 1.0.0
[21:05:44.064422] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.064440] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:05:44.064461] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:05:44.064719] [dll] init: initializing backend `coolscan'
[21:05:44.064975] [dll] init: backend `coolscan' is version 1.0.0
[21:05:44.064994] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.065009] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:05:44.065026] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:05:44.065229] [dll] init: initializing backend `cardscan'
[21:05:44.065308] [dll] init: backend `cardscan' is version 1.0.3
[21:05:44.065348] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.065361] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:05:44.065378] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:05:44.065580] [dll] init: initializing backend `canon_lide70'
[21:05:44.065681] [dll] init: backend `canon_lide70' is version 1.0.0
[21:05:44.065702] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.065717] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:05:44.065736] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:05:44.066064] [dll] init: initializing backend `canon_dr'
[21:05:44.066102] [dll] init: backend `canon_dr' is version 1.0.58
[21:05:44.066391] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.066410] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:05:44.066430] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:05:44.066648] [dll] init: initializing backend `canon630u'
[21:05:44.066746] [dll] init: backend `canon630u' is version 1.0.1
[21:05:44.066762] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.066775] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:05:44.066795] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:05:44.066949] [dll] init: initializing backend `canon'
[21:05:44.067085] [dll] init: backend `canon' is version 1.0.0
[21:05:44.067102] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.067116] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:05:44.067135] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:05:44.067283] [dll] init: initializing backend `bh'
[21:05:44.067542] [dll] init: backend `bh' is version 1.0.4
[21:05:44.067561] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.067574] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:05:44.067594] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:05:44.067827] [dll] init: initializing backend `avision'
[21:05:44.071704] [dll] init: backend `avision' is version 1.0.297
[21:05:44.075517] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.075536] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:05:44.075552] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:05:44.075703] [dll] init: initializing backend `as6e'
[21:05:44.075740] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.075752] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:05:44.075772] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:05:44.075989] [dll] init: initializing backend `artec_eplus48u'
[21:05:44.076215] [dll] init: backend `artec_eplus48u' is version 1.0.0
[21:05:44.076235] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.076249] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:05:44.076269] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:05:44.076439] [dll] init: initializing backend `artec'
[21:05:44.076717] [dll] init: backend `artec' is version 1.0.0
[21:05:44.076737] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.076749] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:05:44.076768] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:05:44.076925] [dll] init: initializing backend `apple'
[21:05:44.077159] [dll] init: backend `apple' is version 1.0.0
[21:05:44.077176] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.077190] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:05:44.077209] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:05:44.077377] [dll] init: initializing backend `agfafocus'
[21:05:44.077559] [dll] init: backend `agfafocus' is version 1.0.0
[21:05:44.077577] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.077591] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:05:44.077610] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:05:44.077759] [dll] init: initializing backend `abaton'
[21:05:44.077990] [dll] init: backend `abaton' is version 1.0.0
[21:05:44.078007] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.078020] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:05:44.078037] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:05:44.078302] [dll] init: initializing backend `net'
[21:05:44.081205] [dll] init: backend `net' is version 1.0.31
[21:05:44.081239] [dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[21:05:44.081267] [dll] sane_exit: exiting
[21:05:44.081278] [dll] sane_exit: calling backend `xerox_mfp's exit function
[21:05:44.081410] [dll] sane_exit: calling backend `umax1220u's exit function
[21:05:44.081488] [dll] sane_exit: calling backend `umax's exit function
[21:05:44.081562] [dll] sane_exit: calling backend `u12's exit function
[21:05:44.081629] [dll] sane_exit: calling backend `teco3's exit function
[21:05:44.081690] [dll] sane_exit: calling backend `teco2's exit function
[21:05:44.081749] [dll] sane_exit: calling backend `teco1's exit function
[21:05:44.081805] [dll] sane_exit: calling backend `tamarack's exit function
[21:05:44.081861] [dll] sane_exit: calling backend `sp15c's exit function
[21:05:44.081914] [dll] sane_exit: calling backend `snapscan's exit function
[21:05:44.081977] [dll] sane_exit: calling backend `sm3840's exit function
[21:05:44.082034] [dll] sane_exit: calling backend `sm3600's exit function
[21:05:44.082091] [dll] sane_exit: calling backend `sharp's exit function
[21:05:44.082150] [dll] sane_exit: calling backend `sceptre's exit function
[21:05:44.082202] [dll] sane_exit: calling backend `s9036's exit function
[21:05:44.082254] [dll] sane_exit: calling backend `rts8891's exit function
[21:05:44.082316] [dll] sane_exit: calling backend `ricoh2's exit function
[21:05:44.082377] [dll] sane_exit: calling backend `ricoh's exit function
[21:05:44.082448] [dll] sane_exit: calling backend `qcam's exit function
[21:05:44.082519] [dll] sane_exit: calling backend `plustek's exit function
[21:05:44.082615] [dll] sane_exit: calling backend `pixma's exit function
[21:05:44.082721] [dll] sane_exit: calling backend `pieusb's exit function
[21:05:44.082785] [dll] sane_exit: calling backend `pie's exit function
[21:05:44.082839] [dll] sane_exit: calling backend `niash's exit function
[21:05:44.082892] [dll] sane_exit: calling backend `nec's exit function
[21:05:44.082944] [dll] sane_exit: calling backend `mustek_usb2's exit function
[21:05:44.083003] [dll] sane_exit: calling backend `mustek_usb's exit function
[21:05:44.083060] [dll] sane_exit: calling backend `mustek's exit function
[21:05:44.083125] [dll] sane_exit: calling backend `microtek2's exit function
[21:05:44.083181] [dll] sane_exit: calling backend `microtek's exit function
[21:05:44.083234] [dll] sane_exit: calling backend `matsushita's exit function
[21:05:44.083285] [dll] sane_exit: calling backend `magicolor's exit function
[21:05:44.083436] [dll] sane_exit: calling backend `ma1509's exit function
[21:05:44.083494] [dll] sane_exit: calling backend `lexmark's exit function
[21:05:44.083550] [dll] sane_exit: calling backend `leo's exit function
[21:05:44.083597] [dll] sane_exit: calling backend `kvs40xx's exit function
[21:05:44.083651] [dll] sane_exit: calling backend `kvs20xx's exit function
[21:05:44.083703] [dll] sane_exit: calling backend `kvs1025's exit function
[21:05:44.083755] [dll] sane_exit: calling backend `kodakaio's exit function
[21:05:44.083811] [dll] sane_exit: calling backend `kodak's exit function
[21:05:44.083865] [dll] sane_exit: calling backend `ibm's exit function
[21:05:44.083911] [dll] sane_exit: calling backend `hs2p's exit function
[21:05:44.083959] [dll] sane_exit: calling backend `hpsj5s's exit function
[21:05:44.084021] [dll] sane_exit: calling backend `hpljm1005's exit function
[21:05:44.084072] [dll] sane_exit: calling backend `hp5590's exit function
[21:05:44.084125] [dll] sane_exit: calling backend `hp5400's exit function
[21:05:44.084179] [dll] sane_exit: calling backend `hp4200's exit function
[21:05:44.084230] [dll] sane_exit: calling backend `hp3900's exit function
[21:05:44.084288] [dll] sane_exit: calling backend `hp3500's exit function
[21:05:44.084344] [dll] sane_exit: calling backend `hp's exit function
[21:05:44.084397] [dll] sane_exit: calling backend `gt68xx's exit function
[21:05:44.084454] [dll] sane_exit: calling backend `genesys's exit function
[21:05:44.084559] [dll] sane_exit: calling backend `fujitsu's exit function
[21:05:44.084619] [dll] sane_exit: calling backend `escl's exit function
[21:05:44.085237] [dll] sane_exit: calling backend `epsonds's exit function
[21:05:44.085297] [dll] sane_exit: calling backend `epson2's exit function
[21:05:44.085362] [dll] sane_exit: calling backend `epjitsu's exit function
[21:05:44.085427] [dll] sane_exit: calling backend `dmc's exit function
[21:05:44.085477] [dll] sane_exit: calling backend `dell1600n_net's exit function
[21:05:44.085518] [dll] sane_exit: calling backend `coolscan3's exit function
[21:05:44.085561] [dll] sane_exit: calling backend `coolscan's exit function
[21:05:44.085602] [dll] sane_exit: calling backend `cardscan's exit function
[21:05:44.085642] [dll] sane_exit: calling backend `canon_lide70's exit function
[21:05:44.085683] [dll] sane_exit: calling backend `canon_dr's exit function
[21:05:44.085726] [dll] sane_exit: calling backend `canon630u's exit function
[21:05:44.085776] [dll] sane_exit: calling backend `canon's exit function
[21:05:44.085815] [dll] sane_exit: calling backend `bh's exit function
[21:05:44.085852] [dll] sane_exit: calling backend `avision's exit function
[21:05:44.085915] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[21:05:44.085955] [dll] sane_exit: calling backend `artec's exit function
[21:05:44.086005] [dll] sane_exit: calling backend `apple's exit function
[21:05:44.086051] [dll] sane_exit: calling backend `agfafocus's exit function
[21:05:44.086088] [dll] sane_exit: calling backend `abaton's exit function
[21:05:44.086124] [dll] sane_exit: calling backend `net's exit function
[21:05:44.086998] [dll] sane_exit: finished

zemog@zemogcoolermaster:~$ SANE_DEBUG_DLL=5 scanimage -L
[21:07:16.266631] [sanei_debug] Setting debug level of dll to 5.
[21:07:16.266708] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.31-debian
[21:07:16.266738] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[21:07:16.266764] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[21:07:16.266793] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[21:07:16.266828] [dll] sane_init/read_dlld: done.
[21:07:16.266856] [dll] sane_init/read_config: reading dll.conf
[21:07:16.266882] [dll] add_backend: adding backend `net'
[21:07:16.266897] [dll] add_backend: adding backend `abaton'
[21:07:16.266915] [dll] add_backend: adding backend `agfafocus'
[21:07:16.266931] [dll] add_backend: adding backend `apple'
[21:07:16.266948] [dll] add_backend: adding backend `artec'
[21:07:16.266965] [dll] add_backend: adding backend `artec_eplus48u'
[21:07:16.266980] [dll] add_backend: adding backend `as6e'
[21:07:16.266996] [dll] add_backend: adding backend `avision'
[21:07:16.267012] [dll] add_backend: adding backend `bh'
[21:07:16.267027] [dll] add_backend: adding backend `canon'
[21:07:16.267041] [dll] add_backend: adding backend `canon630u'
[21:07:16.267057] [dll] add_backend: adding backend `canon_dr'
[21:07:16.267075] [dll] add_backend: adding backend `canon_lide70'
[21:07:16.267091] [dll] add_backend: adding backend `cardscan'
[21:07:16.267106] [dll] add_backend: adding backend `coolscan'
[21:07:16.267121] [dll] add_backend: adding backend `coolscan3'
[21:07:16.267138] [dll] add_backend: adding backend `dell1600n_net'
[21:07:16.267153] [dll] add_backend: adding backend `dmc'
[21:07:16.267168] [dll] add_backend: adding backend `epjitsu'
[21:07:16.267184] [dll] add_backend: adding backend `epson2'
[21:07:16.267200] [dll] add_backend: adding backend `epsonds'
[21:07:16.267216] [dll] add_backend: adding backend `escl'
[21:07:16.267232] [dll] add_backend: adding backend `fujitsu'
[21:07:16.267249] [dll] add_backend: adding backend `genesys'
[21:07:16.267264] [dll] add_backend: adding backend `gt68xx'
[21:07:16.267280] [dll] add_backend: adding backend `hp'
[21:07:16.267296] [dll] add_backend: adding backend `hp3500'
[21:07:16.267311] [dll] add_backend: adding backend `hp3900'
[21:07:16.267326] [dll] add_backend: adding backend `hp4200'
[21:07:16.267343] [dll] add_backend: adding backend `hp5400'
[21:07:16.267360] [dll] add_backend: adding backend `hp5590'
[21:07:16.267375] [dll] add_backend: adding backend `hpljm1005'
[21:07:16.267390] [dll] add_backend: adding backend `hpsj5s'
[21:07:16.267407] [dll] add_backend: adding backend `hs2p'
[21:07:16.267428] [dll] add_backend: adding backend `ibm'
[21:07:16.267444] [dll] add_backend: adding backend `kodak'
[21:07:16.267458] [dll] add_backend: adding backend `kodakaio'
[21:07:16.267472] [dll] add_backend: adding backend `kvs1025'
[21:07:16.267489] [dll] add_backend: adding backend `kvs20xx'
[21:07:16.267507] [dll] add_backend: adding backend `kvs40xx'
[21:07:16.267522] [dll] add_backend: adding backend `leo'
[21:07:16.267538] [dll] add_backend: adding backend `lexmark'
[21:07:16.267553] [dll] add_backend: adding backend `ma1509'
[21:07:16.267571] [dll] add_backend: adding backend `magicolor'
[21:07:16.267586] [dll] add_backend: adding backend `matsushita'
[21:07:16.267601] [dll] add_backend: adding backend `microtek'
[21:07:16.267617] [dll] add_backend: adding backend `microtek2'
[21:07:16.267633] [dll] add_backend: adding backend `mustek'
[21:07:16.267650] [dll] add_backend: adding backend `mustek_usb'
[21:07:16.267667] [dll] add_backend: adding backend `mustek_usb2'
[21:07:16.267682] [dll] add_backend: adding backend `nec'
[21:07:16.267698] [dll] add_backend: adding backend `niash'
[21:07:16.267713] [dll] add_backend: adding backend `pie'
[21:07:16.267728] [dll] add_backend: adding backend `pieusb'
[21:07:16.267745] [dll] add_backend: adding backend `pint'
[21:07:16.267761] [dll] add_backend: adding backend `pixma'
[21:07:16.267777] [dll] add_backend: adding backend `plustek'
[21:07:16.267798] [dll] add_backend: adding backend `qcam'
[21:07:16.267815] [dll] add_backend: adding backend `ricoh'
[21:07:16.267830] [dll] add_backend: adding backend `ricoh2'
[21:07:16.267848] [dll] add_backend: adding backend `rts8891'
[21:07:16.267864] [dll] add_backend: adding backend `s9036'
[21:07:16.267880] [dll] add_backend: adding backend `sceptre'
[21:07:16.267897] [dll] add_backend: adding backend `sharp'
[21:07:16.267913] [dll] add_backend: adding backend `sm3600'
[21:07:16.267928] [dll] add_backend: adding backend `sm3840'
[21:07:16.267944] [dll] add_backend: adding backend `snapscan'
[21:07:16.267960] [dll] add_backend: adding backend `sp15c'
[21:07:16.267978] [dll] add_backend: adding backend `tamarack'
[21:07:16.267992] [dll] add_backend: adding backend `teco1'
[21:07:16.268009] [dll] add_backend: adding backend `teco2'
[21:07:16.268025] [dll] add_backend: adding backend `teco3'
[21:07:16.268039] [dll] add_backend: adding backend `u12'
[21:07:16.268055] [dll] add_backend: adding backend `umax'
[21:07:16.268072] [dll] add_backend: adding backend `umax1220u'
[21:07:16.268090] [dll] add_backend: adding backend `v4l'
[21:07:16.268106] [dll] add_backend: adding backend `xerox_mfp'
[21:07:16.268144] [dll] sane_get_devices
[21:07:16.268160] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.268176] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:07:16.268202] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:07:16.268445] [dll] init: initializing backend `xerox_mfp'
[21:07:16.275719] [dll] init: backend `xerox_mfp' is version 1.0.13
[21:07:16.275887] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.275903] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[21:07:16.275926] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[21:07:16.275940] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[21:07:16.275954] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[21:07:16.275966] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[21:07:16.275980] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[21:07:16.275995] [dll] load: couldn't find backend `v4l' (No such file or directory)
[21:07:16.276011] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.276028] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:07:16.276054] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:07:16.276309] [dll] init: initializing backend `umax1220u'
[21:07:16.276423] [dll] init: backend `umax1220u' is version 1.0.2
[21:07:16.276442] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.276463] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:07:16.276486] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:07:16.276730] [dll] init: initializing backend `umax'
[21:07:16.278033] [dll] init: backend `umax' is version 1.0.45
[21:07:16.278064] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.278080] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:07:16.278105] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:07:16.278392] [dll] init: initializing backend `u12'
[21:07:16.278595] [dll] init: backend `u12' is version 1.0.0
[21:07:16.278626] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.278642] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:07:16.278665] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:07:16.278825] [dll] init: initializing backend `teco3'
[21:07:16.279332] [dll] init: backend `teco3' is version 1.0.1
[21:07:16.279357] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.279376] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:07:16.279401] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:07:16.279558] [dll] init: initializing backend `teco2'
[21:07:16.280358] [dll] init: backend `teco2' is version 1.0.10
[21:07:16.280381] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.280400] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:07:16.280422] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:07:16.280570] [dll] init: initializing backend `teco1'
[21:07:16.281097] [dll] init: backend `teco1' is version 1.0.10
[21:07:16.281120] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.281138] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:07:16.281164] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:07:16.281328] [dll] init: initializing backend `tamarack'
[21:07:16.281575] [dll] init: backend `tamarack' is version 1.0.0
[21:07:16.281595] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.281613] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:07:16.281639] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:07:16.281786] [dll] init: initializing backend `sp15c'
[21:07:16.281895] [dll] init: backend `sp15c' is version 1.0.0
[21:07:16.281913] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.281925] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:07:16.281942] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:07:16.282158] [dll] init: initializing backend `snapscan'
[21:07:16.282553] [dll] init: backend `snapscan' is version 1.4.53
[21:07:16.282573] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.282590] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:07:16.282617] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:07:16.282799] [dll] init: initializing backend `sm3840'
[21:07:16.282886] [dll] init: backend `sm3840' is version 1.0.0
[21:07:16.282903] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.282922] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:07:16.282943] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:07:16.283127] [dll] init: initializing backend `sm3600'
[21:07:16.283207] [dll] init: backend `sm3600' is version 1.0.6
[21:07:16.283224] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.283243] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:07:16.283263] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:07:16.283410] [dll] init: initializing backend `sharp'
[21:07:16.283675] [dll] init: backend `sharp' is version 1.0.0
[21:07:16.283695] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.283713] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:07:16.283736] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:07:16.283892] [dll] init: initializing backend `sceptre'
[21:07:16.284168] [dll] init: backend `sceptre' is version 1.0.10
[21:07:16.284192] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.284210] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:07:16.284233] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:07:16.284383] [dll] init: initializing backend `s9036'
[21:07:16.284578] [dll] init: backend `s9036' is version 1.0.0
[21:07:16.284601] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.284620] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:07:16.284642] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:07:16.284867] [dll] init: initializing backend `rts8891'
[21:07:16.284981] [dll] init: backend `rts8891' is version 1.0.2401
[21:07:16.285064] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.285079] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:07:16.285105] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:07:16.285297] [dll] init: initializing backend `ricoh2'
[21:07:16.285383] [dll] init: backend `ricoh2' is version 1.0.0
[21:07:16.285400] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.285419] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:07:16.285440] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:07:16.285571] [dll] init: initializing backend `ricoh'
[21:07:16.285759] [dll] init: backend `ricoh' is version 1.0.0
[21:07:16.285779] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.285798] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:07:16.285817] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:07:16.285949] [dll] init: initializing backend `qcam'
[21:07:16.285998] [dll] init: backend `qcam' is version 1.0.0
[21:07:16.286015] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.286033] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:07:16.286057] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:07:16.286298] [dll] init: initializing backend `plustek'
[21:07:16.286692] [dll] init: backend `plustek' is version 1.0.0
[21:07:16.286714] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.286733] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:07:16.286757] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:07:16.287067] [dll] init: initializing backend `pixma'
[21:07:16.287191] [dll] init: backend `pixma' is version 1.0.28
[21:07:16.808467] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.808518] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[21:07:16.808551] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[21:07:16.808569] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[21:07:16.808591] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[21:07:16.808606] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[21:07:16.808629] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[21:07:16.808645] [dll] load: couldn't find backend `pint' (No such file or directory)
[21:07:16.808665] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.808700] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:07:16.808732] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:07:16.809142] [dll] init: initializing backend `pieusb'
[21:07:16.809297] [dll] init: backend `pieusb' is version 1.0.1
[21:07:16.809315] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.809332] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:07:16.809359] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:07:16.809514] [dll] init: initializing backend `pie'
[21:07:16.809909] [dll] init: backend `pie' is version 1.0.9
[21:07:16.809930] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.809948] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:07:16.809975] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:07:16.810168] [dll] init: initializing backend `niash'
[21:07:16.810256] [dll] init: backend `niash' is version 1.0.1
[21:07:16.810274] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.810293] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:07:16.810319] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:07:16.810471] [dll] init: initializing backend `nec'
[21:07:16.810660] [dll] init: backend `nec' is version 1.0.0
[21:07:16.810686] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.810705] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:07:16.810731] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:07:16.810949] [dll] init: initializing backend `mustek_usb2'
[21:07:16.810984] [dll] init: backend `mustek_usb2' is version 1.0.10
[21:07:16.811058] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.811073] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:07:16.811101] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:07:16.811305] [dll] init: initializing backend `mustek_usb'
[21:07:16.811434] [dll] init: backend `mustek_usb' is version 1.0.18
[21:07:16.811452] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.811466] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:07:16.811485] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:07:16.811773] [dll] init: initializing backend `mustek'
[21:07:16.812300] [dll] init: backend `mustek' is version 1.0.138
[21:07:16.812327] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.812345] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:07:16.812370] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:07:16.812543] [dll] init: initializing backend `microtek2'
[21:07:16.812821] [dll] init: backend `microtek2' is version 1.0.0
[21:07:16.812851] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.812870] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:07:16.812897] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:07:16.813046] [dll] init: initializing backend `microtek'
[21:07:16.813301] [dll] init: backend `microtek' is version 1.0.0
[21:07:16.813321] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.813340] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:07:16.813365] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:07:16.813502] [dll] init: initializing backend `matsushita'
[21:07:16.813984] [dll] init: backend `matsushita' is version 1.0.7
[21:07:16.814003] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.814014] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:07:16.814029] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:07:16.817769] [dll] init: initializing backend `magicolor'
[21:07:16.817867] [dll] init: backend `magicolor' is version 1.0.1
[21:07:18.321556] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.321602] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:07:18.321630] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:07:18.321929] [dll] init: initializing backend `ma1509'
[21:07:18.322049] [dll] init: backend `ma1509' is version 1.0.3
[21:07:18.322067] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.322082] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:07:18.322099] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:07:18.322301] [dll] init: initializing backend `lexmark'
[21:07:18.322417] [dll] init: backend `lexmark' is version 1.0.32
[21:07:18.322499] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.322514] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:07:18.322533] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:07:18.322667] [dll] init: initializing backend `leo'
[21:07:18.323043] [dll] init: backend `leo' is version 1.0.11
[21:07:18.323065] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.323080] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:07:18.323098] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:07:18.323312] [dll] init: initializing backend `kvs40xx'
[21:07:18.323389] [dll] init: backend `kvs40xx' is version 1.0.1
[21:07:18.323599] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.323618] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:07:18.323637] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:07:18.323843] [dll] init: initializing backend `kvs20xx'
[21:07:18.323919] [dll] init: backend `kvs20xx' is version 1.0.2
[21:07:18.324297] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.324313] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:07:18.324332] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:07:18.324549] [dll] init: initializing backend `kvs1025'
[21:07:18.324692] [dll] init: backend `kvs1025' is version 1.0.5
[21:07:18.324709] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.324721] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:07:18.324741] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:07:18.326848] [dll] init: initializing backend `kodakaio'
[21:07:18.326949] [dll] init: backend `kodakaio' is version 1.0.3
[21:07:20.253702] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.253746] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:07:20.253781] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:07:20.254064] [dll] init: initializing backend `kodak'
[21:07:20.254091] [dll] init: backend `kodak' is version 1.0.7
[21:07:20.254261] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.254282] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:07:20.254302] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:07:20.254465] [dll] init: initializing backend `ibm'
[21:07:20.254647] [dll] init: backend `ibm' is version 1.0.0
[21:07:20.254665] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.254680] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:07:20.254698] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:07:20.254845] [dll] init: initializing backend `hs2p'
[21:07:20.255088] [dll] init: backend `hs2p' is version 1.0.0
[21:07:20.255106] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.255118] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:07:20.255135] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:07:20.255281] [dll] init: initializing backend `hpsj5s'
[21:07:20.255336] [dll] init: backend `hpsj5s' is version 1.0.3
[21:07:20.255351] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.255365] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:07:20.255382] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:07:20.255584] [dll] init: initializing backend `hpljm1005'
[21:07:20.255671] [dll] init: backend `hpljm1005' is version 1.0.1
[21:07:20.255686] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.255700] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:07:20.255720] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:07:20.255909] [dll] init: initializing backend `hp5590'
[21:07:20.255985] [dll] init: backend `hp5590' is version 1.0.8
[21:07:20.256001] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.256015] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:07:20.256034] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:07:20.256220] [dll] init: initializing backend `hp5400'
[21:07:20.256321] [dll] init: backend `hp5400' is version 1.0.3
[21:07:20.256339] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.256352] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:07:20.256373] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:07:20.256563] [dll] init: initializing backend `hp4200'
[21:07:20.256667] [dll] init: backend `hp4200' is version 1.0.0
[21:07:20.256706] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.256725] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:07:20.256745] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:07:20.257478] [dll] init: initializing backend `hp3900'
[21:07:20.257597] [dll] init: backend `hp3900' is version 1.0.0
[21:07:20.257613] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.257627] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:07:20.257645] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:07:20.257840] [dll] init: initializing backend `hp3500'
[21:07:20.257916] [dll] init: backend `hp3500' is version 1.0.0
[21:07:20.257935] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.257948] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:07:20.257966] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:07:20.258228] [dll] init: initializing backend `hp'
[21:07:20.258259] [dll] init: backend `hp' is version 1.0.8
[21:07:20.258597] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.258617] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:07:20.258636] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:07:20.258846] [dll] init: initializing backend `gt68xx'
[21:07:20.259033] [dll] init: backend `gt68xx' is version 1.0.84
[21:07:20.259198] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.259212] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:07:20.259230] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:07:20.260336] [dll] init: initializing backend `genesys'
[21:07:20.261314] [dll] init: backend `genesys' is version 1.0.0
[21:07:20.261494] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.261510] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:07:20.261530] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:07:20.261808] [dll] init: initializing backend `fujitsu'
[21:07:20.261855] [dll] init: backend `fujitsu' is version 1.0.136
[21:07:20.262104] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.262122] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:07:20.262141] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:07:20.284194] [dll] init: initializing backend `escl'
[21:07:20.284330] [dll] init: backend `escl' is version 1.0.0
[21:07:21.300964] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:21.301008] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:07:21.301036] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:07:21.301491] [dll] init: initializing backend `epsonds'
[21:07:21.301592] [dll] init: backend `epsonds' is version 1.0.0
[21:07:21.301646] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:21.301662] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:07:21.301686] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:07:21.301963] [dll] init: initializing backend `epson2'
[21:07:21.302042] [dll] init: backend `epson2' is version 1.0.124
[21:07:22.303348] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.303394] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:07:22.303433] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:07:22.303782] [dll] init: initializing backend `epjitsu'
[21:07:22.303812] [dll] init: backend `epjitsu' is version 1.0.31
[21:07:22.303943] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.303961] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:07:22.303986] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:07:22.304154] [dll] init: initializing backend `dmc'
[21:07:22.304372] [dll] init: backend `dmc' is version 1.0.0
[21:07:22.304393] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.304411] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:07:22.304437] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:07:22.304699] [dll] init: initializing backend `dell1600n_net'
[21:07:22.304723] [dll] init: backend `dell1600n_net' is version 1.0.0
[21:07:22.605190] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.605241] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:07:22.605272] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:07:22.605645] [dll] init: initializing backend `coolscan3'
[21:07:22.605752] [dll] init: backend `coolscan3' is version 1.0.0
[21:07:22.605911] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.605932] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:07:22.605960] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:07:22.606202] [dll] init: initializing backend `coolscan'
[21:07:22.606460] [dll] init: backend `coolscan' is version 1.0.0
[21:07:22.606480] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.606498] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:07:22.606523] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:07:22.606738] [dll] init: initializing backend `cardscan'
[21:07:22.606824] [dll] init: backend `cardscan' is version 1.0.3
[21:07:22.606872] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.606888] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:07:22.606913] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:07:22.607128] [dll] init: initializing backend `canon_lide70'
[21:07:22.607228] [dll] init: backend `canon_lide70' is version 1.0.0
[21:07:22.607249] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.607261] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:07:22.607287] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:07:22.607514] [dll] init: initializing backend `canon_dr'
[21:07:22.607548] [dll] init: backend `canon_dr' is version 1.0.58
[21:07:22.607841] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.607862] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:07:22.607890] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:07:22.608130] [dll] init: initializing backend `canon630u'
[21:07:22.608242] [dll] init: backend `canon630u' is version 1.0.1
[21:07:22.608260] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.608277] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:07:22.608303] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:07:22.608479] [dll] init: initializing backend `canon'
[21:07:22.608630] [dll] init: backend `canon' is version 1.0.0
[21:07:22.608648] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.608663] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:07:22.608705] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:07:22.608856] [dll] init: initializing backend `bh'
[21:07:22.609118] [dll] init: backend `bh' is version 1.0.4
[21:07:22.609141] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.609158] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:07:22.609184] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:07:22.609419] [dll] init: initializing backend `avision'
[21:07:22.613334] [dll] init: backend `avision' is version 1.0.297
[21:07:22.617262] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.617286] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:07:22.617302] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:07:22.617478] [dll] init: initializing backend `as6e'
[21:07:22.617513] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.617526] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:07:22.617548] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:07:22.617780] [dll] init: initializing backend `artec_eplus48u'
[21:07:22.618016] [dll] init: backend `artec_eplus48u' is version 1.0.0
[21:07:22.618035] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.618047] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:07:22.618065] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:07:22.618223] [dll] init: initializing backend `artec'
[21:07:22.618477] [dll] init: backend `artec' is version 1.0.0
[21:07:22.618496] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.618509] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:07:22.618526] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:07:22.618676] [dll] init: initializing backend `apple'
[21:07:22.618907] [dll] init: backend `apple' is version 1.0.0
[21:07:22.618926] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.618940] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:07:22.618964] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:07:22.619138] [dll] init: initializing backend `agfafocus'
[21:07:22.619319] [dll] init: backend `agfafocus' is version 1.0.0
[21:07:22.619339] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.619354] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:07:22.619379] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:07:22.619536] [dll] init: initializing backend `abaton'
[21:07:22.619822] [dll] init: backend `abaton' is version 1.0.0
[21:07:22.619851] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.619869] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:07:22.619895] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:07:22.620235] [dll] init: initializing backend `net'
[21:07:22.623384] [dll] init: backend `net' is version 1.0.31
[21:07:22.623421] [dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[21:07:22.623444] [dll] sane_exit: exiting
[21:07:22.623456] [dll] sane_exit: calling backend `xerox_mfp's exit function
[21:07:22.623613] [dll] sane_exit: calling backend `umax1220u's exit function
[21:07:22.623710] [dll] sane_exit: calling backend `umax's exit function
[21:07:22.623805] [dll] sane_exit: calling backend `u12's exit function
[21:07:22.623903] [dll] sane_exit: calling backend `teco3's exit function
[21:07:22.623986] [dll] sane_exit: calling backend `teco2's exit function
[21:07:22.624070] [dll] sane_exit: calling backend `teco1's exit function
[21:07:22.624150] [dll] sane_exit: calling backend `tamarack's exit function
[21:07:22.624228] [dll] sane_exit: calling backend `sp15c's exit function
[21:07:22.624307] [dll] sane_exit: calling backend `snapscan's exit function
[21:07:22.624393] [dll] sane_exit: calling backend `sm3840's exit function
[21:07:22.624474] [dll] sane_exit: calling backend `sm3600's exit function
[21:07:22.624558] [dll] sane_exit: calling backend `sharp's exit function
[21:07:22.624637] [dll] sane_exit: calling backend `sceptre's exit function
[21:07:22.624731] [dll] sane_exit: calling backend `s9036's exit function
[21:07:22.624808] [dll] sane_exit: calling backend `rts8891's exit function
[21:07:22.624887] [dll] sane_exit: calling backend `ricoh2's exit function
[21:07:22.624966] [dll] sane_exit: calling backend `ricoh's exit function
[21:07:22.625038] [dll] sane_exit: calling backend `qcam's exit function
[21:07:22.625117] [dll] sane_exit: calling backend `plustek's exit function
[21:07:22.625201] [dll] sane_exit: calling backend `pixma's exit function
[21:07:22.625290] [dll] sane_exit: calling backend `pieusb's exit function
[21:07:22.625373] [dll] sane_exit: calling backend `pie's exit function
[21:07:22.625450] [dll] sane_exit: calling backend `niash's exit function
[21:07:22.625555] [dll] sane_exit: calling backend `nec's exit function
[21:07:22.625631] [dll] sane_exit: calling backend `mustek_usb2's exit function
[21:07:22.625710] [dll] sane_exit: calling backend `mustek_usb's exit function
[21:07:22.625788] [dll] sane_exit: calling backend `mustek's exit function
[21:07:22.625874] [dll] sane_exit: calling backend `microtek2's exit function
[21:07:22.625955] [dll] sane_exit: calling backend `microtek's exit function
[21:07:22.626033] [dll] sane_exit: calling backend `matsushita's exit function
[21:07:22.626103] [dll] sane_exit: calling backend `magicolor's exit function
[21:07:22.626247] [dll] sane_exit: calling backend `ma1509's exit function
[21:07:22.626328] [dll] sane_exit: calling backend `lexmark's exit function
[21:07:22.626406] [dll] sane_exit: calling backend `leo's exit function
[21:07:22.626476] [dll] sane_exit: calling backend `kvs40xx's exit function
[21:07:22.626555] [dll] sane_exit: calling backend `kvs20xx's exit function
[21:07:22.626650] [dll] sane_exit: calling backend `kvs1025's exit function
[21:07:22.626733] [dll] sane_exit: calling backend `kodakaio's exit function
[21:07:22.626824] [dll] sane_exit: calling backend `kodak's exit function
[21:07:22.626903] [dll] sane_exit: calling backend `ibm's exit function
[21:07:22.626976] [dll] sane_exit: calling backend `hs2p's exit function
[21:07:22.627059] [dll] sane_exit: calling backend `hpsj5s's exit function
[21:07:22.627156] [dll] sane_exit: calling backend `hpljm1005's exit function
[21:07:22.627231] [dll] sane_exit: calling backend `hp5590's exit function
[21:07:22.627309] [dll] sane_exit: calling backend `hp5400's exit function
[21:07:22.627385] [dll] sane_exit: calling backend `hp4200's exit function
[21:07:22.627460] [dll] sane_exit: calling backend `hp3900's exit function
[21:07:22.627549] [dll] sane_exit: calling backend `hp3500's exit function
[21:07:22.627627] [dll] sane_exit: calling backend `hp's exit function
[21:07:22.627705] [dll] sane_exit: calling backend `gt68xx's exit function
[21:07:22.627785] [dll] sane_exit: calling backend `genesys's exit function
[21:07:22.627987] [dll] sane_exit: calling backend `fujitsu's exit function
[21:07:22.628079] [dll] sane_exit: calling backend `escl's exit function
[21:07:22.628861] [dll] sane_exit: calling backend `epsonds's exit function
[21:07:22.628938] [dll] sane_exit: calling backend `epson2's exit function
[21:07:22.629013] [dll] sane_exit: calling backend `epjitsu's exit function
[21:07:22.629081] [dll] sane_exit: calling backend `dmc's exit function
[21:07:22.629140] [dll] sane_exit: calling backend `dell1600n_net's exit function
[21:07:22.629199] [dll] sane_exit: calling backend `coolscan3's exit function
[21:07:22.629263] [dll] sane_exit: calling backend `coolscan's exit function
[21:07:22.629329] [dll] sane_exit: calling backend `cardscan's exit function
[21:07:22.629394] [dll] sane_exit: calling backend `canon_lide70's exit function
[21:07:22.629453] [dll] sane_exit: calling backend `canon_dr's exit function
[21:07:22.629518] [dll] sane_exit: calling backend `canon630u's exit function
[21:07:22.629593] [dll] sane_exit: calling backend `canon's exit function
[21:07:22.629660] [dll] sane_exit: calling backend `bh's exit function
[21:07:22.629716] [dll] sane_exit: calling backend `avision's exit function
[21:07:22.629806] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[21:07:22.629867] [dll] sane_exit: calling backend `artec's exit function
[21:07:22.629927] [dll] sane_exit: calling backend `apple's exit function
[21:07:22.629983] [dll] sane_exit: calling backend `agfafocus's exit function
[21:07:22.630039] [dll] sane_exit: calling backend `abaton's exit function
[21:07:22.630095] [dll] sane_exit: calling backend `net's exit function
[21:07:22.630921] [dll] sane_exit: finished


zemog@zemogcoolermaster:~$ xsane
Gtk-Message: 21:10:35.358: Failed to load module "canberra-gtk-module"

zemog@zemogcoolermaster:~$ cat /etc/sane.d/dll.conf |grep ricoh
ricoh
ricoh2

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#5 02-07-2022 00:28:42

èfpé
Membre
Inscription : 10-07-2016

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Re-,

zemog a écrit :

[...] c'est pourquoi je remets ce que je viens d'envoyer sur le fil initial. [...]


Un simple lien pointant vers le message d'origine serait suffisant... et plus conforme à la nétiquette.

Hors ligne

#6 02-07-2022 10:00:42

èfpé
Membre
Inscription : 10-07-2016

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Re-,

ylag a écrit :

Sous toute réserve, il faudrait le «backend» ricoh2 pour un tel appareil ?


Bon allez on tente ça en premier. Le backend ricoh2 n'est pas commenté. Il faut créer deux fichiers :

nano /etc/sane.d/ricoh2.conf

# Ricoh Aficio SP-1000S
usb 0x079b 0x005f


Note : ce fichier n'existe pas nativement (le fichier ricoh.conf existant concerne les scanners SCSI).
edit: ce fichier est très probablement vain, ignoré par le backend ricoh2 (les PID sont codés en dur).

nano /etc/udev/hwdb.d/30-sane.hwdb

# Ricoh Aficio SP-1000S
usb:v079Bp005F*
 libsane_matched=yes


Le choix du nom de ce fichier de configuration est 'arbitraire' (voir /lib/udev/hwdb.d/20-sane.hwdb).

apt install libusb-0.1-4


Oui, ce paquet peut cohabiter avec le paquet libusb-1.0-0 déjà installé (ton scanner date de 2006).

S'agissant d'un périphérique USB, redémarrer n'est pas forcément nécessaire. Juste dé/rebrancher.
En cas d'échec on tentera autre chose (le backend ricoh2 prend en charge des scanners de 2011+).

Dernière modification par èfpé (04-07-2022 13:00:42)

Hors ligne

#7 02-07-2022 14:53:22

ylag
Membre
Inscription : 16-03-2020

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Bonjour,

Pour mon information personnelle : Pourquoi créer un fichier /etc/udev/hwdb.d/*.hwdb (hardware database) au lieu d'un fichier *.rules dans /etc/udev/rules.d ?
Faudra-il les deux, éventuellement ?

A+

Hors ligne

#8 02-07-2022 16:14:06

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

bonjour ,

voici le retour des commandes exécutées :

nano /etc/sane.d/ricoh2.conf



nano /etc/udev/hwdb.d/30-sane.hwdb




apt install libusb-0.1-4


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
libusb-0.1-4 est déjà la version la plus récente (2:0.1.12-32).
libusb-0.1-4 passé en « installé manuellement ».
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

scanimage -L




No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#9 02-07-2022 16:21:37

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Je crois que je viens de comprendre quelque chose. Lorsque je crée le fichier suite à la commande

nano /etc/sane.d/ricoh2.conf



Je dois y incorporer les termes suivants : # Ricoh Aficio SP-1000S
usb 0x079b 0x005f

Si c'est le cas je ne l'ai pas fait car je n'avais pas compris. Comment retrouver le fichier et intégrer les informations sans créer un nouveau fichier ?sos.gif


Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#10 02-07-2022 16:33:28

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Bon, de guerre lasse, j'ai refait les mêmes commandes en insérant les lignes de dessous kernal_panic.gifet obtenu le même résultat ; RIEN

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#11 02-07-2022 17:54:42

èfpé
Membre
Inscription : 10-07-2016

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Re-,

zemog a écrit :

RIEN


Inutile de crier zemog, on s'occupe de toi. Et désolé, j'ai oublié de poster le lien du wiki pour nano...

cat /etc/sane.d/ricoh2.conf

cat /etc/udev/hwdb.d/30-sane.hwdb


SANE_DEBUG_RICOH2=8 scanimage -L


Les retours permettront de vérifier que les fichiers ont été correctement créés... Après on enchaîne.

Hors ligne

#12 02-07-2022 18:44:10

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Merci èfpé,

Je ne crie pas. Je sais bien que vous aidez comme vous le pouvez et c'est bien.

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#13 02-07-2022 18:47:12

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

d'ailleurs voici le retour de commande:

cat /etc/sane.d/ricoh2.conf



# Ricoh Aficio SP-1000S
usb 0x079b 0x005f

cat /etc/udev/hwdb.d/30-sane.hwdb



# Ricoh Aficio SP-1000S
usb:v079Bp005F*
libsane_matched=yes


Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#14 02-07-2022 18:59:10

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

SANE_DEBUG_RICOH2=8 scanimage -L

 



[18:57:40.486716] [sanei_debug] Setting debug level of ricoh2 to 8.
[18:57:40.486741] [ricoh2] >sane_init
[18:57:40.486785] [ricoh2] <sane_init
[18:57:40.486790] [ricoh2] >sane_get_devices
[18:57:40.486795] [ricoh2] found 0 devices
[18:57:40.486800] [ricoh2] <sane_get_devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[18:57:46.818203] [ricoh2] >sane_exit
[18:57:46.818240] [ricoh2] <sane_exit


Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#15 02-07-2022 19:54:42

èfpé
Membre
Inscription : 10-07-2016

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Re-,

zemog a écrit :

SANE_DEBUG_RICOH2=8 scanimage -L

[18:57:40.486716] [sanei_debug] Setting debug level of ricoh2 to 8.
[18:57:40.486741] [ricoh2] >sane_init
[18:57:40.486785] [ricoh2] <sane_init
[18:57:40.486790] [ricoh2] >sane_get_devices
[18:57:40.486795] [ricoh2] found 0 devices
[18:57:40.486800] [ricoh2] <sane_get_devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[18:57:46.818203] [ricoh2] >sane_exit
[18:57:46.818240] [ricoh2] <sane_exit


Merci pour ces retours. Si tu avais effectivement dé/rebranché le MFP, alors c'est mort pour ricoh2...
Une question, avant de proposer le pilote 'spll2' : en 2017, avais-tu installé le paquet libusb-0.1-4 ?

Hors ligne

#16 02-07-2022 20:03:41

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Je te confirme que j'avais bien dé/rebranché le MFP. J'ai même arrêté l'imprimante. Le retour des commandes xsane et scanimage -L reste le même. c'est le même scénario pour l'application gscan2pdf. Quant à savoir si le paquet libusb-0.1-4 est installé, je n'en ai aucune idée. Comment vérifier ?

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#17 02-07-2022 20:09:18

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Autres tests ci-dessous


sane-find-scanner


 # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x1d6b/0x0003 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x045e/0x0750 at 003:003: Access denied (insufficient permissions)
could not open USB device 0x093a/0x2532 at 003:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x0b0e/0x2467 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x0b0e/0x245e at 001:002: Access denied (insufficient permissions)
found USB scanner (vendor=0x079b [MFPrinter ], product=0x005f [Laser Pro LL]) at libusb:001:005
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
 



sane-find-scanner


  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x079b [MFPrinter ], product=0x005f [Laser Pro LL]) at libusb:001:005
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
 


Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#18 03-07-2022 00:00:42

èfpé
Membre
Inscription : 10-07-2016

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Re-,

zemog a écrit :

Quant à savoir si le paquet libusb-0.1-4 est installé, je n'en ai aucune idée. Comment vérifier ?


On le sait que le paquet libusb-0.1-4 est installé, aujourd'hui, cf. retour de commande posté en #8.

Ma question porte sur la tentative (octobre 2017) de scanner avec le multifonction Sagem MF 5461.
L'hypothèse simpliste est qu'à l'époque, l'erreur d'entrée/sortie était due à l'absence de ce paquet...

Les identifiants USB étant identiques, l'idée (un peu naïve) est de te faire installer le même pilote !

Hors ligne

#19 03-07-2022 19:12:00

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Bonjour èfpé,

Merci pour le conseil, mais je me demande à quoi sert sa réinstallation si elle est déjà effective ?

retour #8:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
libusb-0.1-4 est déjà la version la plus récente (2:0.1.12-32).
libusb-0.1-4 passé en « installé manuellement ».
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

En tout cas voici 2 dernière actions:

apt remove libusb-0.1-4


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Le paquet suivant a été installé automatiquement et n'est plus nécessaire :
  discover-data
Veuillez utiliser « apt autoremove » pour le supprimer.
Les paquets suivants seront ENLEVÉS :
  discover libdiscover2 libusb-0.1-4
0 mis à jour, 0 nouvellement installés, 3 à enlever et 0 non mis à jour.
Après cette opération, 415 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 173029 fichiers et répertoires déjà installés.)
Suppression de discover (2.1.2-8) ...
Suppression de libdiscover2 (2.1.2-8) ...
Suppression de libusb-0.1-4:amd64 (2:0.1.12-32) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.4-2) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-13+deb11u3) ...
 



apt install libusb-0.1-4


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Le paquet suivant a été installé automatiquement et n'est plus nécessaire :
  discover-data
Veuillez utiliser « apt autoremove » pour le supprimer.
Les NOUVEAUX paquets suivants seront installés :
  libusb-0.1-4
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 23,4 ko dans les archives.
Après cette opération, 59,4 ko d'espace disque supplémentaires seront utilisés.
Réception de :1 http://deb.debian.org/debian bullseye/main amd64 libusb-0.1-4 amd64 2:0.1.12-32 [23,4 kB]
23,4 ko réceptionnés en 0s (628 ko/s)  
Sélection du paquet libusb-0.1-4:amd64 précédemment désélectionné.
(Lecture de la base de données... 172994 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libusb-0.1-4_2%3a0.1.12-32_amd64.deb ...
Dépaquetage de libusb-0.1-4:amd64 (2:0.1.12-32) ...
Paramétrage de libusb-0.1-4:amd64 (2:0.1.12-32) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-13+deb11u3) ...
 


Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#20 03-07-2022 22:54:42

èfpé
Membre
Inscription : 10-07-2016

Re : Numériser (scanner) avec imprimante Ricoh Aficio SP 1000S

Bonsoir zemog,

zemog a écrit :

[...], mais je me demande à quoi sert sa réinstallation si elle est déjà effective ?


Je ne t'ai absolument pas 'conseillé' de réinstaller le paquet libusb-0.1-4, où donc as-tu pu lire cela ?

Ricoh Aficio SP 1000S et Sagem MF 5461 (cf. discussion de 2017) ont les mêmes identifiants USB.
Cela suggère une parenté matérielle ; l'idée de installer le même pilote me semble assez naturelle ;

L'archive Linux.zip n'étant plus disponible sur sagemcom.com j'ai hébergé >ici< le pilote du scanner.

rm /etc/sane.d/ricoh2.conf /etc/udev/hwdb.d/30-sane.hwdb


Autant commencer par supprimer les fichiers créés en #6, un fichier 99-libspll2.rules va être installé.

cd /home/zemog/Téléchargements/


file-roller -h spll2-1.0-linux-2.6-intel.tar.gz


cd /home/zemog/Téléchargements/spll2-1.0-linux-2.6-intel/


./spll2.install

Copyright 2011-01-01 OEM

This installation script will install the Scanner Pro LL2
software version 1.0 on your system.

Do you wish to continue? yes
LICENSE AGREEMENT FOR THE SOFTWARE
[...]

Do you agree with the terms of this license? yes
./spll2.install: 150: test: Illegal number: sur <-- c pô grave
Backing up old versions of non-shared files to be installed...
Backing up old versions of shared files to be installed...
Installing software...
Updating file permissions...
Running post-install commands...

Are you select Lan port? no
Installation is complete.
 


Pour un téléchargement vers ~/Téléchargements (le script n'affiche pas correctement l'espace libre).
S'agissant d'un périphérique USB, redémarrer n'est pas forcément nécessaire. Juste dé/rebrancher.

Voilà, j'espère que tu n'auras pas d'erreur d'entrée/sortie, branche le MFP en USB 2.0, si disponible.

edit: les exécutables sont prévus pour 32-bit (elf32-i386), donc cela ne fonctionnera pas en 64-bit.

Pour que cela ait une chance de fonctionner, il faut installer toute la chaîne de numérisation en i386 :

dpkg --add-architecture i386


apt update && apt install libusb-0.1-4:i386 sane-utils:i386


Du fait des dépendances d'autres paquets (libc6:i386, libsane1:i386 etc) seront également installés.
Il faut aussi installer les interfaces graphiques (gscan2pdf, sane, simple-scan, xsane, autres) 32-bit.

Dernière modification par èfpé (04-07-2022 20:54:42)

Hors ligne

Pied de page des forums