logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 30-12-2023 18:27:52

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

[Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

Hello/
{english people, you can use https://www.deepl.com/translator}

À chaque fois que j'éteins ma machine sous SiD, ça rame à s'éteindre, je vois mon fond d'écran propulsé par `feh` qui met bien 5sec à disparaître... écran noir avec le petit tiret en haut à gauche qui clignote... puis un message qui défile en se répétant du genre:

[         94.381585] nouveau 0000:01:00.0: timer: stalled at ffffffffffffffff


Pour le moment je ne trouve pas grand chose sur le Waibe.

Si quelqu'un a un peu de lumière à partager?

Merci.

Dernière modification par TyZef (05-01-2024 00:43:01)


« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#2 30-12-2023 18:29:56

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

PS: c'est nouveau, j'avais pas ça avant ou alors ça passait inaperçu et aussi petite précision j'ai deux carte graphiques dont une Nvidia(dont je me passerai bien vue la coopération du dit groupe avec GNU/Linux)...

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#3 31-12-2023 11:12:37

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

J'ai aussi ça dans mon `dmesg`:

[    2.056306] nouveau: detected PR support, will not use DSM
[    2.056333] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[    2.056539] nouveau 0000:01:00.0: NVIDIA GP108 (138000a1)
[    2.075653] nouveau 0000:01:00.0: bios: version 86.08.3e.00.47
[    2.075812] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/acr/ucode_load.bin
[    2.075891] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/acr/bl.bin
[    2.075906] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/acr/ucode_unload.bin
[    2.075929] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/acr/unload_bl.bin
[    2.075937] nouveau 0000:01:00.0: pmu: firmware unavailable
[    2.076017] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/fecs_bl.bin
[    2.076034] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/fecs_inst.bin
[    2.076123] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/fecs_data.bin
[    2.076138] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/fecs_sig.bin
[    2.076152] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/gpccs_bl.bin
[    2.076165] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/gpccs_inst.bin
[    2.076214] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/gpccs_data.bin
[    2.076229] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/gpccs_sig.bin
[    2.076241] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/sw_nonctx.bin
[    2.076261] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/sw_ctx.bin
[    2.076292] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/sw_bundle_init.bin
[    2.076331] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/gr/sw_method_init.bin
[    2.076388] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/sec2/sig.bin
[    2.076424] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/sec2/image.bin
[    2.076783] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/sec2/desc.bin
[    2.158273] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    2.158287] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp108/nvdec/scrubber.bin
[    2.186334] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    2.186336] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[    2.186338] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[    2.186339] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[    2.186339] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not found
[    2.186340] nouveau 0000:01:00.0: DRM: DCB version 4.1
[    2.193410] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    2.193537] [drm] Initialized nouveau 1.4.0 20120801 for 0000:01:00.0 on minor 0
[    2.193599] nouveau 0000:01:00.0: [drm] No compatible format found
[    2.193601] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
 


« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#4 31-12-2023 12:45:03

damien
Modo / Rédacteur Wiki
Distrib. : Gentoo & Debian 12
(G)UI : Xfce4
Inscription : 22-09-2008
Site Web

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

Salut @TyZef

Pourquoi n'installerais tu pas le pilote graphique nvidia ? même si je sais qu'ils sont pénible avec GNU/Linux.

signature.jpg

Hors ligne

#5 01-01-2024 04:51:18

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

Éventuellement en dernier recours,

Merci DamiONE !

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#6 01-01-2024 08:21:54

mister_g
Membre
Distrib. : debian sid
Noyau : Linux 6.6.13
(G)UI : fluxbox
Inscription : 20-07-2022

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

J'ai installé les drivers NVidia de force si je peux dire. Nouveau gère mal ma résolution d'écran.
Après installation des drivers propriétaires, la résolution est bien gérée (heureusement).
Seul bémol : je dois faire attention lors d'un  changement de noyau, vérifier si les drivers ont été compilé pour ledit noyau.

Hors ligne

#7 02-01-2024 04:50:14

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

ah, je vois que activer ma carte nvidia me ferait consommer plus de batterie... pas cool

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#8 02-01-2024 08:13:32

mister_g
Membre
Distrib. : debian sid
Noyau : Linux 6.6.13
(G)UI : fluxbox
Inscription : 20-07-2022

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

si tu as un portable avec deux cartes vidéo, oui tu vas surement consommer plus avec la carte nvidia qui doit être plus puissante que celle par défaut

Hors ligne

#9 03-01-2024 07:49:56

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

Bon, j'ai fais un :

/etc/modprobe.d/blacklist-nouveau.conf

blacklist nouveau
 


Et ça semble résolue.
Merci pour vôtre attention.


« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#10 03-01-2024 07:52:43

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

en fait je me tâte si c'est résolue ou contourné?

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#11 03-01-2024 08:10:46

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

oh non non, j'ai fais autre chose !

j'ai fais ça :

/etc/modprobe.d/blacklist-nouveau.conf

blacklist nouveau
options nouveau modeset=0


puis
/etc/udev/rules.d/00-remove-nvidia.rules

# Remove NVIDIA USB xHCI Host Controller devices, if present
ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c0330", ATTR{power/control}="auto", ATTR{remove}="1"

# Remove NVIDIA USB Type-C UCSI devices, if present
ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c8000", ATTR{power/control}="auto", ATTR{remove}="1"

# Remove NVIDIA Audio devices, if present
ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x040300", ATTR{power/control}="auto", ATTR{remove}="1"

# Remove NVIDIA VGA/3D controller devices
ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x03[0-9]*", ATTR{power/control}="auto", ATTR{remove}="1"


La différence s'est tout de suite ressentit sur l'autonomie de la batterie. \o/
Et plus de crie du bâillonné `nouveau` !

sources: https://wiki.archlinux.org/title/Hybrid … screte_GPU
1.1.2 Using udev rules

Dernière modification par TyZef (03-01-2024 08:13:12)


« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#12 03-01-2024 08:18:56

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

j'ai trafiqué le topic pour les anglais [pour me la péter, meh] si des fois ça peut aider.

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#13 04-01-2024 01:31:01

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

bon finalement j'ai enlevé le [resolue] car je ne peux plus visionner de vidéo que ce soit sur `mpv` ou `firefox`...

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#14 04-01-2024 11:12:20

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

bon j'ai cassé mon system \o/ !!!

et je crois que c'est la première fois en 10ans, vive les cartes graphics hybrids !

je n'ai plus d'audio, plus de video, même en remettant les paquets et configurations comme avant...

je soupçonne des `apt purge` au lieu de `apt remove` et donc un simple problème de configuration, mais dans un tel chaos volontaire si je puis dire, ce n'est pas éthique de continuer à demander de l'aide. alors je vais capituler et réinstaller, je ne vois pas d'option plus sérieuse, efficace et rapide.

mais je suis content, j'ai les mains pleines de 1 et de 0 !

kenavo/

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#15 04-01-2024 13:11:17

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

bon en fait en root mpv fonctionne, mais là je pars au travail, donc je vais quand même m'acharner sur ce problème, car j'aime m'acharner !  (sur les problèmes, pas sur les gens, sauf si on me cherche, et encore...)

je me tiens au jus !

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#16 05-01-2024 00:42:01

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

bon tout est finalement rentré dans l'ordre, je ne comprend pas trop mais bon...

j'ai fais du grand n'importe quoi mais j'ai essayé de le faire proprement, je poste ici mon historique de commandes si ca intéresse quelqu'un:
ps: parmi les leçons que j'ai retenue "ne pas purger des paquets sans être absolument conscient des conséquences éventuelles présentes ou futures"

  242  apt purge "*nvidia*"
  243  systemctl reboot
  244  apt install --reinstall xserver-xorg-core xserver-xorg-video-nouveau
  245  systemctl reboot
  246  journalctl -b-1 | grep systemd
  247  clear
  248  journalctl -b-2 | grep systemd
  249  clear
  250  last reboot | head
  251  apt upgrade
  252  apt list --installed
  253  clear
  254  dmesg
  255  clear
  256  clear
  257  apt update
  258  apt upgrade
  259  apt install pipewire-pulse
  260  apt install pipewire-audio
  261  apt install bluetooth
  262  reboot
  263  cd /home/tyzef/Documents
  264  ls
  265  cd GNU-Linux
  266  ls
  267  cd Distros
  268  ls
  269  lsblk
  270  history | grep dd
  271   dd if=Parrot-security-5.3_amd64.iso of=/dev/sdb bs=4M status=progress && sync
  272  nano /etc/bluetooth/audio.conf
  273  nano /etc/bluetooth/main.conf
  274  reboot
  275  apt install wireplumber pipewire-media-session-
  276  apt autoremove
  277  apt autoremove
  278  rm /etc/bluetooth/audio.conf
  279  nano /etc/bluetooth/main.conf
  280  reboot
  281  apt install bluez-tools bluez-utils
  282  apt install bluez-tools
  283  nano /etc/bluetooth/main.conf
  284  systemctl restart bluetooth
  285  bluetoothctl
  286  cd /home/tyzef/Documents
  287  cd /home/tyzef/Documents/GNU-Linux/Distros
  288  ls
  289  lsblk
  290  dd if=archcraft-2023.07.05-x86_64.iso of=/dev/sdb bs=4M status=progress && sync
  291  lsblk
  292  mount /dev/sdb1 /mnt
  293  umount /dev/sdb1
  294  lsusb
  295  lsusb
  296  mount /dev/sda1 /mnt
  297  pacmd list-cards
  298  rfkill
  299  apt install rfkill
  300  rfkill
  301  nvidia-detect
  302  lspci -nn | egrep -i "3d|display|vga"
  303  apt install isenkram-cli
  304  isenkram-autoinstall-firmware
  305  apt install firmware-realtek-rtl8723cs-bt
  306  reboot
  307  apt purge firmware-misc-nonfree
  308  apt purge firmware-misc-nonfree
  309  reboot
  310  dmesg
  311  apt list --installed
  312  apt purge xserver-xorg-video-nouveau
  313  apt purge xserver-xorg-video-nouveau
  314  reboot
  315  apt purge firmware-misc-nonfree
  316  apt install firmware-misc-nonfree
  317  reboot
  318  apt purge libdrm-nouveau2
  319  apt autoremove
  320  apt install xserver-xorg-video-nouveau
  321  lspci | grep -E "VGA|3D"
  322  glxinfo | grep OpenGL
  323  lspci | grep -E "VGA|3D"
  324  lspci | grep -E "VGA|3D"
  325  apt purge xserver-xorg-video-intel
  326  apt purge xserver-xorg-video-nouveau
  327  reboot
  328  dmesg --level=emerg,alert,crit,err
  329  dmesg --level=emerg,alert,crit,err
  330  reboot
  331  apt update
  332  apt upgrade
  333  apt install acpi_call
  334  modprobe acpi_call
  335  modprobe acpi-call
  336  apt install acpi-call
  337  modprobe acpi-call
  338  /usr/share/acpi_call/examples/turn_off_gpu.sh
  339  man  acpi-call
  340  help acpi-call
  341  man -k acpi-call
  342  info acpi-call
  343  acpi-call
  344  apt install acpi-call
  345  apt autoremove
  346  man acpi-call-dkms
  347  help acpi-call-dkms
  348  acpi-call-dkms
  349  echo '<call>' | tee /proc/acpi/call
  350  find / -name "*acpi*"
  351  find / -name "*acpi-call*"
  352  ls /proc
  353  ls /proc/acpi
  354  ls /proc/acpi
  355  echo '<call>' | sudo tee /proc/acpi/call
  356  nano /proc/acpi/call
  357  nano /proc/acpi/call
  358  ls -a /proc/acpi
  359  mkdir /proc/acpi/call
  360  ls /proc
  361  mkdir /proc/acpi/call
  362  echo '\_SB.PCI0.PEG1.GFX0.DOFF' > /proc/acpi/call
  363  modprobe acpi-call
  364  echo '\_SB.PCI0.PEG1.GFX0.DOFF' > /proc/acpi/call
  365  nano /usr/share/acpi_call/examples/turn_off_gpu.sh
  366  ls /usr/share/acpi_call
  367  mkdir /usr/share/acpi_call
  368  mkdir /usr/share/acpi_call/examples/
  369  nano /usr/share/acpi_call/examples/turn_off_gpu.sh
  370  mv /home/tyzef/Downloads/turn_off_gpu.sh /usr/share/acpi_call/examples/
  371  ls /usr/share/acpi_call/examples/
  372  chmod a+x /usr/share/acpi_call/examples/turn_off_gpu.sh
  373  /usr/share/acpi_call/examples/turn_off_gpu.sh
  374  nano /etc/tmpfiles.d/acpi_call.conf
  375  nano /etc/tmpfiles.d/acpi_call.conf
  376  nano /etc/tmpfiles.d/acpi_call.conf
  377  dmesg
  378  rm /etc/tmpfiles.d/acpi_call.conf
  379  history
  380  dmesg --level=emerg,alert,crit,err
  381  reboot
  382  dmesg --level=emerg,alert,crit,err
  383  apt remove xserver-xorg-video-nouveau
  384  apt purge xserver-xorg-video-nouveau
  385  reboot
  386  dmesg --level=emerg,alert,crit,err
  387  reboot
  388  apt install xserver-xorg-video-nouveau
  389  apt list --installed
  390  apt purge  xserver-xorg-video-amdgpu xserver-xorg-video-radeon xserver-xorg-video-ati xserver-xorg-video-fbdev
  391  apt install nvidia-driver
  392  nano /etc/modprobe.d/blacklist-nouveau.conf
  393  update-initramfs -u
  394  apt purge xserver-xorg-video-nouveau
  395  apt purge  xserver-xorg-video-amdgpu xserver-xorg-video-radeon xserver-xorg-video-ati xserver-xorg-video-fbdev
  396  apt autoremove
  397  reboot
  398  startx
  399  acpi
  400  acpi
  401  acpi
  402  acpi
  403  acpi
  404  history
  405  history | grep apt
  406  apt purge acpi-call
  407  apt purge acpi-call-dkms
  408  apt autoremove
  409  apt update
  410  apt upgrade
  411  history | grep apt
  412  apt purge bluetooth
  413  apt purge bluez
  414  apt purge bluez-tools
  415  apt purge pipewire-pulse pipewire-audio wireplumber pipewire-media-session-
  416  apt autoremove
  417  reboot
  418  nano /etc/modprobe.d/blacklist-nouveau.conf
  419  nano /etc/udev/rules.d/00-remove-nvidia.rules
  420  reboot
  421  apt update
  422  apt update
  423  apt upgrade
  424  apt list --installed
  425  history | grep apt
  426  apt update
  427  apt upgrade
  428  reboot
  429  history | grep apt
  430  apt install xserver-xorg-video-intel
  431  shutdown now
  432  apt purge xserver-xorg-video-intel
  433  apt autoremove
  434  nano /etc/X11/xorg.conf
  435  nano /etc/X11/xorg.conf
  436  startx
  437  exit
  438  Xorg -configure
  439  rm /tmp/.X0-lock
  440  Xorg -configure
  441  Xorg -configure
  442  ls
  443  ranger
  444  exit
  445  ls
  446  cp xorg.conf.new /etc/X11/xorg.conf
  447  nano /etc/X11/xorg.conf
  448  apt install xserver-xorg-video-intel
  449  apt remove xserver-xorg-video-intel
  450  apt autoremove
  451  nano /etc/modprobe.d/blacklist-nouveau.conf
  452  update-initramfs -u
  453  acpi
  454  rm /etc/X11/xorg.conf
  455  reboot
  456  apt install xserver-xorg-video-nouveau
  457  reboor
  458  reboot
  459  nano /etc/udev/rules.d/00-remove-nvidia.rules
  460  apt remove xserver-xorg-video-nouveau
  461  apt autopurge
  462  update-initramfs -u
  463  reboot
  464  history
  465  cp xorg.conf.new /etc/X11/xorg.conf
  466  update-initramfs -u
  467  cp xorg.conf.new /etc/X11/xorg.conf
  468  ls
  469  ls /etc/X11/
  470  shutdown now
  471  ranger
  472  exit
  473  rm /etc/X11/xorg.conf
  474  ls /etc/X11/
  475  ls /etc/X11/xorg.conf.d
  476  ranger
  477  startx
  478  exit
  479  startx
  480  alsamixer
  481  dmesg
  482  dmesg
  483  ranger
  484  ranger
  485  startx
  486  apt purge alsa-utils
  487  rm /var/lib/alsa
  488  ls /var/lib/alsa
  489  rm /var/lib/alsa
  490  rm -r /var/lib/alsa
  491  nano /etc/udev/rules.d/00-remove-nvidia.rules
  492  history | grep nano
  493  nano /etc/modprobe.d/blacklist-nouveau.conf
  494  history | grep apt
  495  reboot
  496  history
  497  glxinfo | grep '^OpenGL renderer string:'
  498  apt install glxinfo
  499  apt install alsa-utils
  500  apt install mesa-utils
  501  history
 


« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#17 05-01-2024 00:45:17

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

Il est sérieux ???

TyZef a écrit :

alors je vais capituler et réinstaller, je ne vois pas d'option plus sérieuse, efficace et rapide.


Il voulais réinstaller sa Debian...


« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

#18 05-01-2024 08:42:47

TyZef
Membre
Lieu : Clan d'Eau.
Distrib. : ~ Debian 12 noDE ~ inspired by nakeDeb ~
Noyau : Linux 6.1.0-18-amd64
(G)UI : OB3
Inscription : 09-05-2013

Re : [Résolu] nouveau 0000:01:00.0: timer: stalled at fffffffffffff

Je poste aussi cette autre approche des "hybrids graphics" :
https://forum-debian.fr/viewtopic.php?t=2612
Merci à vv221 sur IRC pour le partage de ce lien, o/

« De deux choses lune, l’autre c’est le soleil » - Barbara Prévert.

Hors ligne

Pied de page des forums