Debian-facile

sizy458

Membre

Distrib. : Debian 11

Noyau : 5.10.0-8-amd64

(G)UI : gnome

Inscription : 16-06-2018

erreur usb dmesg

Bonjour,
Je n'ai rien installer de spécial , et j'ai ces erreur inhabituel ci dessous :

usb 2-1.4: Disable of device-initiated U1 failed.
[sam. sept. 28 19:22:18 2024] usb 2-1.4: Disable of device-initiated U2 failed.
[sam. sept. 28 19:22:18 2024] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 15 using xhci_hcd
[sam. sept. 28 19:22:28 2024] usb 2-1.4: device firmware changed
[sam. sept. 28 19:22:28 2024] usb 2-1.4: USB disconnect, device number 15
[sam. sept. 28 19:22:28 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 16 using xhci_hcd
[sam. sept. 28 19:22:28 2024] usb 2-1.4: Invalid ep0 maxpacket: 64
[sam. sept. 28 19:22:29 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 17 using xhci_hcd
[sam. sept. 28 19:22:29 2024] usb 2-1.4: Invalid ep0 maxpacket: 64
[sam. sept. 28 19:22:29 2024] usb 2-1-port4: attempt power cycle
[sam. sept. 28 19:22:29 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 18 using xhci_hcd
[sam. sept. 28 19:22:29 2024] usb 2-1.4: Invalid ep0 maxpacket: 64
[sam. sept. 28 19:22:30 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 19 using xhci_hcd
[sam. sept. 28 19:22:30 2024] usb 2-1.4: Invalid ep0 maxpacket: 64

 

et ceux-ci aujourd’hui :

[dim. sept. 29 18:19:19 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd
[dim. sept. 29 18:19:20 2024] usb 2-1.4: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.00
[dim. sept. 29 18:19:20 2024] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[dim. sept. 29 18:19:20 2024] usb 2-1.4: Product: USB DISK 3.0
[dim. sept. 29 18:19:20 2024] usb 2-1.4: Manufacturer:        
[dim. sept. 29 18:19:20 2024] usb 2-1.4: SerialNumber: 900039572C668A02
[dim. sept. 29 18:19:20 2024] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[dim. sept. 29 18:19:20 2024] scsi host11: usb-storage 2-1.4:1.0
[dim. sept. 29 18:19:21 2024] scsi 11:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[dim. sept. 29 18:19:53 2024] usb 2-1.4: Disable of device-initiated U1 failed.
[dim. sept. 29 18:19:53 2024] usb 2-1.4: Disable of device-initiated U2 failed.
[dim. sept. 29 18:19:53 2024] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 9 using xhci_hcd
[dim. sept. 29 18:20:03 2024] usb 2-1.4: device firmware changed
[dim. sept. 29 18:20:03 2024] usb 2-1.4: USB disconnect, device number 9
[dim. sept. 29 18:20:03 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 10 using xhci_hcd
[dim. sept. 29 18:20:03 2024] usb 2-1.4: Invalid ep0 maxpacket: 64
[dim. sept. 29 18:20:04 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 11 using xhci_hcd
[dim. sept. 29 18:20:04 2024] usb 2-1.4: Invalid ep0 maxpacket: 64
[dim. sept. 29 18:20:04 2024] usb 2-1-port4: attempt power cycle
[dim. sept. 29 18:20:04 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 12 using xhci_hcd
[dim. sept. 29 18:20:04 2024] usb 2-1.4: Invalid ep0 maxpacket: 64
[dim. sept. 29 18:20:05 2024] usb 2-1.4: new SuperSpeed Gen 1 USB device number 13 using xhci_hcd
[dim. sept. 29 18:20:05 2024] usb 2-1.4: Invalid ep0 maxpacket: 64
[dim. sept. 29 18:20:05 2024] usb 2-1-port4: unable to enumerate USB device

 

Çà veux dire j'ai des déconnexions des périphériques USB ,
comment le savoir si c'est Linux ou ma carte mére ?
J'ai changer les hubs , donc les câbles , et je ne sais pas d’où cela provient ?

Çà le fait de temps en temps.

Comment faire pour y résoudre ?
Merci.

Dernière modification par sizy458 (29-09-2024 17:21:43)