Vous n'êtes pas identifié(e).
Pages : 1
Dernière modification par bjm (23-10-2008 17:48:09)
Hors ligne
Hors ligne
Hors ligne
Hors ligne
Bonjour;
J'ai réinstaller fluxbuntu en attendent d'en savoir un peu plus .
Est ce que tu as un chipset philips et est ce que j'ai toi elle fonctionne ?
Oui philips et elle fonctionne en TNT, en analogique, je n'ai pas essayer.
Hors ligne
Hors ligne
J'ai une HVR1100, donc si tu veux un conseil, ce sera avec plaisir.
J'ai testé sans succès une instal (1.8.1.......) grâce au dépôt. il doit y avoir un bug freevo ne se lance pas.
J'ai une lenny 64bit. Venant d'ubuntu c'est un peu galère mais ça avance....
Merci pour l'accueil
:)merci de relire:)
Hors ligne
[ 42.205344] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 42.205571] saa7133[0]: found at 0000:01:09.0, rev: 209, irq: 18, latency: 181, mmio: 0xf4101000
[ 42.205583] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[ 42.205604] saa7133[0]: board init: gpio is 6400000
[ 42.728702] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 42.728725] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 42.728741] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[ 42.728757] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 42.728772] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[ 42.728788] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.728803] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.728818] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.728833] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 bd e7 06 f0 73 05 29 00
[ 42.728848] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 18 89 72 07 70 73 09
[ 42.728864] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[ 42.728880] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 c4 00 00 00 00 00 00 00 00 00
[ 42.728895] saa7133[0]: i2c eeprom c0: 84 09 00 04 20 77 00 40 bd e7 06 f0 73 05 29 00
[ 42.728911] saa7133[0]: i2c eeprom d0: 84 08 00 06 cb 05 01 00 94 18 89 72 07 70 73 09
[ 42.728926] saa7133[0]: i2c eeprom e0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[ 42.728942] saa7133[0]: i2c eeprom f0: 10 01 72 11 ff 79 c4 00 00 00 00 00 00 00 00 00
[ 43.892227] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 43.952309] saa7133[0]: hauppauge eeprom: model=67019
[ 48.417902] saa7133[0]: registered device video0 [v4l2]
[ 48.417945] saa7133[0]: registered device vbi0
[ 48.417988] saa7133[0]: registered device radio0
[ 48.619055] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[ 48.619074] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[ 48.619456] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[ 48.619461] saa7134_alsa: Unknown symbol saa_dsp_writel
[ 48.619963] saa7134_alsa: disagrees about version of symbol videobuf_dma_free
[ 48.619967] saa7134_alsa: Unknown symbol videobuf_dma_free
[ 48.620469] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_alloc
[ 48.620474] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[ 48.620618] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_build
[ 48.620665] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[ 48.620787] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_free
[ 48.620792] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[ 48.620914] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[ 48.620919] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[ 48.621289] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[ 48.621294] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[ 48.621579] saa7134_alsa: disagrees about version of symbol videobuf_dma_init
[ 48.621583] saa7134_alsa: Unknown symbol videobuf_dma_init
[ 48.621997] saa7134_alsa: disagrees about version of symbol videobuf_dma_init_kernel
[ 48.622002] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[ 48.622375] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[ 48.622754] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[ 48.622892] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[ 48.622897] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[ 48.816964] DVB: registering new adapter (saa7133[0])
lsmod | grep dvb
saa7134_dvb 21644 0
videobuf_dvb 7812 1 saa7134_dvb
dvb_core 81404 2 saa7134_dvb,videobuf_dvb
saa7134 146388 1 saa7134_dvb
videobuf_dma_sg 14980 5 cx8800,cx88xx,bttv,saa7134_dvb,saa7134
videobuf_core 19716 6 cx8800,cx88xx,bttv,videobuf_dvb,saa7134,videobuf_dma_sg
i2c_core 24832 14 cx88xx,ivtv,bttv,lirc_i2c,tda1004x,saa7134_dvb,tda827x,tda8290,tuner,saa7134,v4l2_common,tveeprom,i2c_i810,i2c_algo_bit
Hors ligne
vlc -vvv dvb-t:adapter=0:frequency=586167000:bandwidth=8 --program=257
VLC media player 0.8.6e Janus
[00000001] main private debug: checking builtin modules
[00000001] main private debug: checking plugin modules
[00000001] main private debug: loading plugins cache file /home/bernard/.vlc/cache/plugins-04041e.dat
[00000001] main private warning: could not open plugins cache file /home/bernard/.vlc/cache/plugins-04041e.dat for reading
[00000001] main private debug: recursively browsing `modules'
[00000001] main private debug: recursively browsing `/usr/lib/vlc'
[00000001] main private debug: recursively browsing `plugins'
[00000001] main private debug: module bank initialized, found 225 modules
[00000001] main private debug: opening config file /home/bernard/.vlc/vlcrc
[00000001] main private warning: config file /home/bernard/.vlc/vlcrc does not exist yet
[00000001] main private debug: CPU has capabilities 486 586 MMX MMXEXT SSE FPU
[00000001] main private debug: looking for memcpy module: 1 candidate
[00000001] main private debug: using memcpy module "memcpy"
[00000287] main playlist debug: waiting for thread completion
[00000287] main playlist debug: thread 3032271760 (playlist) created at priority 0 (playlist/playlist.c:184)
[00000288] main private debug: waiting for thread completion
[00000288] main private debug: thread 3023879056 (preparser) created at priority 0 (playlist/playlist.c:210)
[00000289] main interface debug: looking for interface module: 1 candidate
[00000289] main interface debug: using interface module "hotkeys"
[00000289] main interface debug: thread 3015486352 (interface) created at priority 0 (interface/interface.c:231)
[00000290] main interface debug: looking for interface module: 1 candidate
[00000290] main interface debug: using interface module "screensaver"
[00000290] main interface debug: thread 3007093648 (interface) created at priority 0 (interface/interface.c:231)
[00000287] main playlist debug: adding playlist item `dvb-t:adapter=0:frequency=586167000:bandwidth=8' ( dvb-t:adapter=0:frequency=586167000:bandwidth=8 )
[00000291] main interface debug: looking for interface module: 5 candidates
[00000291] main interface debug: using interface module "wxwidgets"
[00000291] main interface debug: thread 2998700944 (manager) created at priority 0 (interface/interface.c:216)
[00000287] main playlist debug: nothing requested, starting
[00000287] main playlist debug: creating new input thread
[00000292] main input debug: waiting for thread completion
[00000292] main input debug: creating statistics handler
[00000292] main input debug: `dvb-t:adapter=0:frequency=586167000:bandwidth=8' gives access `dvb-t' demux `' path `adapter=0:frequency=586167000:bandwidth=8'
[00000292] main input debug: creating demux: access='dvb-t' demux='' path='adapter=0:frequency=586167000:bandwidth=8'
[00000294] main demuxer debug: looking for access_demux module: 0 candidates
[00000294] main demuxer warning: no access_demux module matched "dvb-t"
[00000292] main input debug: creating access 'dvb-t' path='adapter=0:frequency=586167000:bandwidth=8'
[00000295] main access debug: looking for access2 module: 6 candidates
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/frontend0
[00000292] main input debug: thread 2984246160 (input) created at priority 0 (input/input.c:265)
[00000295] dvb access debug: Frontend Info:
[00000295] dvb access debug: name = Philips TDA10046H DVB-T
[00000295] dvb access debug: type = OFDM (DVB-T)
[00000295] dvb access debug: frequency_min = 51000000 (kHz)
[00000295] dvb access debug: frequency_max = 858000000 (kHz)
[00000295] dvb access debug: frequency_stepsize = 166667
[00000295] dvb access debug: frequency_tolerance = 0
[00000295] dvb access debug: symbol_rate_min = 0 (kHz)
[00000295] dvb access debug: symbol_rate_max = 0 (kHz)
[00000295] dvb access debug: symbol_rate_tolerance (ppm) = 0
[00000295] dvb access debug: notifier_delay (ms) = 0
[00000295] dvb access debug: Frontend Info capability list:
[00000295] dvb access debug: inversion auto
[00000295] dvb access debug: forward error correction 1/2
[00000295] dvb access debug: forward error correction 2/3
[00000295] dvb access debug: forward error correction 3/4
[00000295] dvb access debug: forward error correction 5/6
[00000295] dvb access debug: forward error correction 7/8
[00000295] dvb access debug: forward error correction auto
[00000295] dvb access debug: card can do QPSK
[00000295] dvb access debug: card can do QAM 16
[00000295] dvb access debug: card can do QAM 64
[00000295] dvb access debug: card can do QAM auto
[00000295] dvb access debug: transmission mode auto
[00000295] dvb access debug: guard interval mode auto
[00000295] dvb access debug: End of capability list
[00000295] dvb access debug: trying to tune the frontend...
[00000295] dvb access debug: using inversion=2
[00000295] dvb access debug: using bandwidth=8
[00000295] dvb access debug: using fec=9
[00000295] dvb access debug: using fec=9
[00000295] dvb access debug: using transmission=0
[00000295] dvb access debug: using guard=0
[00000295] dvb access debug: using hierarchy=0
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/dvr0
[00000295] dvb access debug: setting filter on PAT
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/demux0
[00000295] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 0
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/ca0
[00000295] dvb access warning: CAMInit: opening CAM device failed (Aucun fichier ou dossier de ce type)
[00000295] main access debug: using access2 module "dvb"
[00000296] main private debug: pre buffering
[00000296] main private debug: received first data for our buffer
[00000296] main private debug: prebuffering done 376 bytes in 1s - 0 kbytes/s
[00000292] main input debug: creating demux: access='dvb-t' demux='' path='adapter=0:frequency=586167000:bandwidth=8'
[00000297] main demuxer debug: looking for demux2 module: 45 candidates
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/demux0
[00000295] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 17
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/demux0
[00000295] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 18
[00000297] main demuxer debug: using demux2 module "ts"
[00000292] main input debug: looking for a subtitle file in /home/bernard/
[00000297] ts demuxer debug: DEMUX_SET_GROUP 257 (nil)
[00000295] dvb access warning: unimplemented query in control
[00000292] main input debug: `dvb-t:adapter=0:frequency=586167000:bandwidth=8' successfully opened
libdvbpsi error (PSI decoder): TS discontinuity (received 1, expected 0) for PID 0
[00000297] ts demuxer debug: PATCallBack called
[00000297] ts demuxer debug: new PAT ts_id=1 version=2 current_next=1
[00000297] ts demuxer debug: * number=0 pid=16
[00000297] ts demuxer debug: * number=257 pid=110
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/demux0
[00000295] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 110
[00000297] ts demuxer debug: * number=260 pid=310
[00000297] ts demuxer debug: * number=261 pid=510
[00000297] ts demuxer debug: * number=262 pid=610
[00000297] ts demuxer debug: * number=273 pid=210
[00000297] ts demuxer debug: * number=374 pid=710
[00000297] ts demuxer debug: * number=511 pid=1010
[00000295] dvb access debug: frontend has acquired signal
[00000295] dvb access debug: frontend has acquired carrier
[00000295] dvb access debug: frontend has acquired stable FEC
[00000295] dvb access debug: frontend has acquired sync
[00000295] dvb access debug: frontend has acquired lock
[00000295] dvb access debug: - Bit error rate: 2
[00000295] dvb access debug: - Signal strength: 46003
[00000295] dvb access debug: - SNR: 64764
libdvbpsi error (PSI decoder): TS discontinuity (received 5, expected 0) for PID 110
[00000297] ts demuxer debug: PMTCallBack called
[00000297] ts demuxer debug: new PMT program number=257 version=0 pid_pcr=120
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/demux0
[00000295] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 120
[00000297] ts demuxer debug: * es pid=120 type=2 fcc=mpgv
[00000292] main input debug: selecting program id=257
[00000298] main decoder debug: looking for decoder module: 25 candidates
[00000298] main decoder debug: using decoder module "libmpeg2"
[00000298] main decoder debug: thread 2974296976 (decoder) created at priority 0 (input/decoder.c:159)
[00000297] ts demuxer debug: * es pid=130 type=3 fcc=mpga
[00000299] main decoder debug: looking for decoder module: 25 candidates
[00000299] main decoder debug: using decoder module "mpeg_audio"
[00000299] main decoder debug: thread 2965904272 (decoder) created at priority 0 (input/decoder.c:159)
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/demux0
[00000295] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 130
[00000297] ts demuxer debug: * es pid=140 type=6 dr->i_tag=0x59
[00000297] ts demuxer debug: * es pid=140 type=6 fcc=dvbs
[00000295] dvb access debug: Opening device /dev/dvb/adapter0/demux0
[00000295] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 140
libdvbpsi error (PSI decoder): TS discontinuity (received 4, expected 0) for PID 18
[00000297] ts demuxer warning: first packet for pid=120 cc=0xa
[00000297] ts demuxer warning: first packet for pid=130 cc=0xf
[00000297] ts demuxer warning: first packet for pid=140 cc=0x0
[00000299] mpeg_audio decoder debug: MPGA channels:2 samplerate:48000 bitrate:192
[00000299] main decoder debug: no aout present, spawning one
[00000300] main audio output debug: looking for audio output module: 8 candidates
[00000300] pulse audio output debug: Pulse mainloop started
libdvbpsi error (PSI decoder): TS discontinuity (received 1, expected 0) for PID 17
[00000297] ts demuxer debug: PSINewTableCallBack: table 0x42(66) ext=0x1(1)
[00000297] ts demuxer debug: SDTCallBack called
[00000297] ts demuxer debug: new SDT ts_id=1 version=9 current_next=1 network_id=8442
[00000297] ts demuxer debug: * service id=273 eit schedule=0 present=1 running=4 free_ca=0
[00000297] ts demuxer debug: * service id=257 eit schedule=0 present=1 running=4 free_ca=0
[00000297] ts demuxer debug: - type=1 provider=GR1 name=France 2
[00000292] main input debug: EsOutProgramMeta: number=257
[00000292] main input debug: - Name = France 2
[00000292] main input debug: - Provider = GR1
[00000292] main input debug: - Type = Digital television service
[00000292] main input debug: - Status = Running
[00000297] ts demuxer debug: * service id=260 eit schedule=0 present=1 running=4 free_ca=0
[00000297] ts demuxer debug: * service id=262 eit schedule=0 present=1 running=4 free_ca=0
[00000297] ts demuxer debug: * service id=261 eit schedule=0 present=1 running=4 free_ca=0
[00000297] ts demuxer debug: * service id=374 eit schedule=0 present=1 running=4 free_ca=0
[00000300] pulse audio output debug: Pulse stream connected
[00000300] pulse audio output debug: Pulse initialized successfully
[00000300] pulse audio output debug: Buffer metrics: maxlength=48000, tlength=43200, prebuf=21600, minreq=4320
[00000300] pulse audio output debug: Using sample spec 's16le 2ch 48000Hz', channel map 'front-left,front-right'.
[00000300] pulse audio output debug: Connected to device alsa_output.pci_13f6_111_sound_card_0_alsa_playback_0 (0, not suspended).
[00000300] main audio output debug: using audio output module "pulse"
[00000300] main audio output debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes
[00000300] main audio output debug: mixer 'fl32' 48000 Hz Stereo frame=1 samples/8 bytes
[00000300] main audio output debug: filter(s) 'fl32'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo
[00000301] main private debug: looking for audio filter module: 24 candidates
[00000301] main private debug: using audio filter module "float32tos16"
[00000300] main audio output debug: found a filter for the whole conversion
[00000300] main audio output debug: looking for audio mixer module: 3 candidates
[00000300] main audio output debug: using audio mixer module "trivial_mixer"
[00000300] main audio output debug: input 'mpga' 48000 Hz Stereo frame=1152 samples/1161 bytes
[00000300] main audio output debug: filter(s) 'mpga'->'fl32' 48000 Hz->48000 Hz Stereo->Stereo
[00000302] main private debug: looking for audio filter module: 24 candidates
[00000302] main private debug: using audio filter module "mpgatofixed32"
[00000300] main audio output debug: found a filter for the whole conversion
[00000300] main audio output debug: filter(s) 'fl32'->'fl32' 52800 Hz->48000 Hz Stereo->Stereo
[00000303] main private debug: looking for audio filter module: 24 candidates
[00000303] main private debug: using audio filter module "bandlimited_resampler"
[00000300] main audio output debug: found a filter for the whole conversion
[00000300] pulse audio output debug: Pulse stream started
[00000300] main audio output warning: output date isn't PTS date, requesting resampling (86071)
[00000300] main audio output warning: output date isn't PTS date, requesting resampling (50261)
[00000300] main audio output warning: audio drift is too big (136499), dropping buffer
[00000300] main audio output warning: buffer is 112688 late, triggering upsampling
[00000298] libmpeg2 decoder debug: 720x576 (display 720,576), aspect 768000, sar 64:45, 25.000 fps
[00000298] main decoder debug: no usable vout present, spawning one
[00000304] main video output debug: window size: 1024x576
[00000304] main video output debug: looking for video output module: 9 candidates
[00000305] main private debug: Registering subpicture channel, ID: 2
[00000305] main private debug: Registering subpicture channel, ID: 3
[00000305] main private debug: Registering subpicture channel, ID: 4
[00000305] main private debug: Registering subpicture channel, ID: 5
[00000304] xvideo video output debug: adaptor 0, port 73, format 0x32315659 (YV12) planar
[00000304] xvideo video output debug: XShm video extension v1.1 (with pixmaps, opcode: 146)
[00000304] xvideo video output debug: Window manager supports NetWM
[00000304] xvideo video output debug: Window manager supports _NET_WM_STATE_FULLSCREEN
[00000304] xvideo video output debug: Window manager supports _NET_WM_STATE_ABOVE
[00000304] xvideo video output debug: Window manager supports _NET_WM_STATE_BELOW
[00000304] main video output debug: using video output module "xvideo"
[00000304] main video output debug: got 8 direct buffer(s)
[00000304] main video output debug: picture in 720x576 (0,0,720x576), chroma I420, ar 16:9, sar 64:45
[00000304] main video output debug: picture user 720x576 (0,0,720x576), chroma I420, ar 16:9, sar 64:45
[00000304] main video output debug: picture out 720x576 (0,0,720x576), chroma I420, ar 16:9, sar 64:45
[00000304] main video output debug: direct render, mapping render pictures 0-6 to system pictures 1-7
[00000304] main video output debug: waiting for thread completion
[00000304] main video output debug: thread 2945448848 (video output) created at priority 0 (video_output/video_output.c:421)
[00000306] main private warning: dts != current_pts (171701)
[00000297] ts demuxer debug: PSINewTableCallBack: table 0x4e(78) ext=0x101(257)
[00000306] main private warning: vout synchro warning: pts != current_date (-40000)
[00000297] ts demuxer debug: PSINewTableCallBack: table 0x4e(78) ext=0x104(260)
[00000297] ts demuxer debug: PSINewTableCallBack: table 0x4e(78) ext=0x105(261)
[00000297] ts demuxer debug: PSINewTableCallBack: table 0x4e(78) ext=0x106(262)
[00000297] ts demuxer debug: PSINewTableCallBack: table 0x4e(78) ext=0x111(273)
[00000297] ts demuxer debug: PSINewTableCallBack: table 0x4e(78) ext=0x176(374)
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 140 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 86
Current serial number in output stream: 87
Erreur de segmentation
Hors ligne
Dernière modification par Xarno (01-08-2008 17:35:52)
Hors ligne
Hors ligne
Hors ligne
Hors ligne
mplayer dvb://France3
MPlayer 1.0rc2-4.3.1-DFSG-free (C) 2000-2007 MPlayer Team
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Model: 8, Stepping: 10)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://France3.
dvb_tune Freq: 586167000
TS file format detected.
VIDEO MPEG2(pid=220) AUDIO MPA(pid=230) NO SUBS (yet)! PROGRAM N. 0
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 15000.0 kbps (1875.0 kbyte/s)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 720x576 => 768x576 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) ??,?% 1 0
X11 error: BadAlloc (insufficient resources for operation) ??,?% 2 0
X11 error: BadAlloc (insufficient resources for operation) ??,?% 4 0
X11 error: BadAlloc (insufficient resources for operation) ??,?% 5 0
X11 error: BadAlloc (insufficient resources for operation)
X11 error: BadAlloc (insufficient resources for operation) ??,?% 7 0
X11 error: BadAlloc (insufficient resources for operation)
X11 error: BadAlloc (insufficient resources for operation)
Je suis sous lenny .
Hors ligne
Hors ligne
Pages : 1