Bonjour,
j'ai un gros problème (une fois de plus
) je n'arrive plus à avoir une interface graphique depuis deux jours.
Lorsque je lance startx l'écran devient noir puis revient au terminal:
sortie du startx
X.Org X Server 1.15.1
Release Date: 2014-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
Current Operating System: Linux Sydney-debian 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=2ab1f80d-313e-4ffa-9c9d-05145bebeaff ro rootfstype=ext4 init=/sbin/e4rat-preload quiet
Build Date: 15 April 2014 06:58:36PM
xorg-server 2:1.15.1-1 (http://www.debian.org/support)
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 15 19:25:39 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension SELinux
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
log de Xorg:
[ 80.267]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 80.267] X Protocol Version 11, Revision 0
[ 80.267] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[ 80.267] Current Operating System: Linux Sydney-debian 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) x86_64
[ 80.267] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=2ab1f80d-313e-4ffa-9c9d-05145bebeaff ro rootfstype=ext4 init=/sbin/e4rat-preload quiet
[ 80.267] Build Date: 15 April 2014 06:58:36PM
[ 80.267] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 80.267] Current version of pixman: 0.32.4
[ 80.267] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 80.267] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 80.267] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 15 19:25:39 2014
[ 80.267] (==) Using config file: "/etc/X11/xorg.conf"
[ 80.267] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 80.267] (==) ServerLayout "Layout0"
[ 80.267] (**) |-->Screen "Screen0" (0)
[ 80.267] (**) | |-->Monitor "Monitor0"
[ 80.267] (**) | |-->Device "Device0"
[ 80.267] (**) |-->Input Device "Keyboard0"
[ 80.267] (**) |-->Input Device "Mouse0"
[ 80.267] (==) Automatically adding devices
[ 80.267] (==) Automatically enabling devices
[ 80.267] (==) Automatically adding GPU devices
[ 80.267] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 80.267] Entry deleted from font path.
[ 80.267] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 80.267] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 80.267] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 80.267] (WW) Disabling Keyboard0
[ 80.267] (WW) Disabling Mouse0
[ 80.267] (II) Loader magic: 0x7fe3936cad40
[ 80.267] (II) Module ABI versions:
[ 80.267] X.Org ANSI C Emulation: 0.4
[ 80.267] X.Org Video Driver: 15.0
[ 80.268] X.Org XInput driver : 20.0
[ 80.268] X.Org Server Extension : 8.0
[ 80.269] (--) PCI:*(0:1:0:0) 10de:0e22:10b0:0801 rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 80.269] Initializing built-in extension Generic Event Extension
[ 80.269] Initializing built-in extension SHAPE
[ 80.269] Initializing built-in extension MIT-SHM
[ 80.269] Initializing built-in extension XInputExtension
[ 80.269] Initializing built-in extension XTEST
[ 80.269] Initializing built-in extension BIG-REQUESTS
[ 80.269] Initializing built-in extension SYNC
[ 80.269] Initializing built-in extension XKEYBOARD
[ 80.269] Initializing built-in extension XC-MISC
[ 80.269] Initializing built-in extension SECURITY
[ 80.269] Initializing built-in extension XINERAMA
[ 80.269] Initializing built-in extension XFIXES
[ 80.269] Initializing built-in extension RENDER
[ 80.269] Initializing built-in extension RANDR
[ 80.269] Initializing built-in extension COMPOSITE
[ 80.269] Initializing built-in extension DAMAGE
[ 80.269] Initializing built-in extension MIT-SCREEN-SAVER
[ 80.269] Initializing built-in extension DOUBLE-BUFFER
[ 80.269] Initializing built-in extension RECORD
[ 80.269] Initializing built-in extension DPMS
[ 80.269] Initializing built-in extension Present
[ 80.269] Initializing built-in extension DRI3
[ 80.269] Initializing built-in extension X-Resource
[ 80.269] Initializing built-in extension XVideo
[ 80.269] Initializing built-in extension XVideo-MotionCompensation
[ 80.269] Initializing built-in extension SELinux
[ 80.269] Initializing built-in extension XFree86-VidModeExtension
[ 80.269] Initializing built-in extension XFree86-DGA
[ 80.269] Initializing built-in extension XFree86-DRI
[ 80.269] Initializing built-in extension DRI2
[ 80.269] (II) LoadModule: "glx"
[ 80.269] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 80.283] (II) Module glx: vendor="NVIDIA Corporation"
[ 80.283] compiled for 4.0.2, module version = 1.0.0
[ 80.283] Module class: X.Org Server Extension
[ 80.283] (II) NVIDIA GLX Module 331.67 Fri Apr 4 11:43:47 PDT 2014
[ 80.283] Loading extension GLX
[ 80.283] (II) LoadModule: "nvidia"
[ 80.283] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 80.284] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 80.284] compiled for 4.0.2, module version = 1.0.0
[ 80.284] Module class: X.Org Video Driver
[ 80.284] (II) NVIDIA dlloader X Driver 331.67 Fri Apr 4 11:24:40 PDT 2014
[ 80.284] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 80.284] (--) using VT number 7
[ 80.288] (II) Loading sub module "fb"
[ 80.288] (II) LoadModule: "fb"
[ 80.289] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 80.289] (II) Module fb: vendor="X.Org Foundation"
[ 80.289] compiled for 1.15.1, module version = 1.0.0
[ 80.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 80.289] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 80.289] (II) Loading sub module "wfb"
[ 80.289] (II) LoadModule: "wfb"
[ 80.290] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 80.290] (II) Module wfb: vendor="X.Org Foundation"
[ 80.290] compiled for 1.15.1, module version = 1.0.0
[ 80.290] ABI class: X.Org ANSI C Emulation, version 0.4
[ 80.290] (II) Loading sub module "ramdac"
[ 80.290] (II) LoadModule: "ramdac"
[ 80.290] (II) Module "ramdac" already built-in
[ 80.290] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 80.291] (==) NVIDIA(0): RGB weight 888
[ 80.291] (==) NVIDIA(0): Default visual is TrueColor
[ 80.291] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 80.291] (**) NVIDIA(0): Enabling 2D acceleration
[ 80.580] (II) NVIDIA(0): Display (Ancor Communications Inc VW195 (CRT-1)) does not
[ 80.580] (II) NVIDIA(0): support NVIDIA 3D Vision stereo.
[ 80.652] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
[ 80.653] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 80.653] (--) NVIDIA(0): VideoBIOS: 70.04.1b.00.02
[ 80.653] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 80.654] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
[ 80.654] (--) NVIDIA(0): CRT-0
[ 80.654] (--) NVIDIA(0): Ancor Communications Inc VW195 (CRT-1) (boot, connected)
[ 80.654] (--) NVIDIA(0): DFP-0
[ 80.654] (--) NVIDIA(0): DFP-1
[ 80.655] (--) NVIDIA(0): DFP-2
[ 80.655] (--) NVIDIA(0): CRT-0: 480.0 MHz maximum pixel clock
[ 80.655] (--) NVIDIA(0): Ancor Communications Inc VW195 (CRT-1): 400.0 MHz maximum pixel clock
[ 80.655] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 80.655] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 80.655] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 80.655] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 80.655] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 80.655] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[ 80.655] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 80.655] (**) NVIDIA(0): device Ancor Communications Inc VW195 (CRT-1) (Using EDID
[ 80.655] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 80.658] (==) NVIDIA(0):
[ 80.658] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 80.658] (==) NVIDIA(0): will be used as the requested mode.
[ 80.658] (==) NVIDIA(0):
[ 80.658] (II) NVIDIA(0): Validated MetaModes:
[ 80.658] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 80.658] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 80.683] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 80.683] (--) NVIDIA(0): option
[ 80.683] (--) Depth 24 pixmap format is 32 bpp
[ 80.683] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 80.683] (II) NVIDIA: access.
[ 80.688] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 80.729] Loading extension NV-GLX
[ 80.776] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 80.776] (==) NVIDIA(0): Backing store enabled
[ 80.776] (==) NVIDIA(0): Silken mouse enabled
[ 80.776] (**) NVIDIA(0): DPMS enabled
[ 80.776] Loading extension NV-CONTROL
[ 80.776] Loading extension XINERAMA
[ 80.776] (II) Loading sub module "dri2"
[ 80.776] (II) LoadModule: "dri2"
[ 80.776] (II) Module "dri2" already built-in
[ 80.776] (II) NVIDIA(0): [DRI2] Setup complete
[ 80.776] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 80.777] (--) RandR disabled
[ 80.780] (II) SELinux: Disabled on system
[ 80.781] (II) Initializing extension GLX
[ 80.822] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 80.822] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.822] (II) LoadModule: "evdev"
[ 80.822] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 80.823] (II) Module evdev: vendor="X.Org Foundation"
[ 80.823] compiled for 1.15.0, module version = 2.8.2
[ 80.823] Module class: X.Org XInput Driver
[ 80.823] ABI class: X.Org XInput driver, version 20.0
[ 80.823] (II) Using input driver 'evdev' for 'Power Button'
[ 80.823] (**) Power Button: always reports core events
[ 80.823] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 80.823] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.823] (--) evdev: Power Button: Found keys
[ 80.823] (II) evdev: Power Button: Configuring as keyboard
[ 80.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 80.823] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.823] (**) Option "xkb_rules" "evdev"
[ 80.823] (**) Option "xkb_model" "pc105"
[ 80.823] (**) Option "xkb_layout" "fr"
[ 80.853] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 80.853] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.853] (II) Using input driver 'evdev' for 'Power Button'
[ 80.853] (**) Power Button: always reports core events
[ 80.853] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 80.853] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.853] (--) evdev: Power Button: Found keys
[ 80.854] (II) evdev: Power Button: Configuring as keyboard
[ 80.854] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 80.854] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 80.854] (**) Option "xkb_rules" "evdev"
[ 80.854] (**) Option "xkb_model" "pc105"
[ 80.854] (**) Option "xkb_layout" "fr"
[ 80.855] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 80.855] (II) No input driver specified, ignoring this device.
[ 80.855] (II) This device may have been added with another device file.
[ 80.855] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 80.855] (II) No input driver specified, ignoring this device.
[ 80.855] (II) This device may have been added with another device file.
[ 80.856] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 80.856] (II) No input driver specified, ignoring this device.
[ 80.856] (II) This device may have been added with another device file.
[ 80.856] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 80.856] (II) No input driver specified, ignoring this device.
[ 80.856] (II) This device may have been added with another device file.
[ 80.857] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 80.857] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 80.857] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 80.857] (**) USB OPTICAL MOUSE: always reports core events
[ 80.857] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 80.857] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 80.857] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 80.857] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 80.857] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 80.857] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 80.857] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 80.857] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 80.857] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 80.857] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.857] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1/event1"
[ 80.857] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 8)
[ 80.858] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 80.858] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 80.858] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 80.858] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 80.858] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 80.859] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 80.859] (II) No input driver specified, ignoring this device.
[ 80.859] (II) This device may have been added with another device file.
[ 80.859] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event7)
[ 80.859] (II) No input driver specified, ignoring this device.
[ 80.859] (II) This device may have been added with another device file.
[ 80.860] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event6)
[ 80.860] (II) No input driver specified, ignoring this device.
[ 80.860] (II) This device may have been added with another device file.
[ 80.860] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event5)
[ 80.860] (II) No input driver specified, ignoring this device.
[ 80.860] (II) This device may have been added with another device file.
[ 80.861] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event12)
[ 80.861] (II) No input driver specified, ignoring this device.
[ 80.861] (II) This device may have been added with another device file.
[ 80.861] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event11)
[ 80.861] (II) No input driver specified, ignoring this device.
[ 80.861] (II) This device may have been added with another device file.
[ 80.862] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event10)
[ 80.862] (II) No input driver specified, ignoring this device.
[ 80.862] (II) This device may have been added with another device file.
[ 80.862] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[ 80.862] (II) No input driver specified, ignoring this device.
[ 80.862] (II) This device may have been added with another device file.
[ 80.863] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event8)
[ 80.863] (II) No input driver specified, ignoring this device.
[ 80.863] (II) This device may have been added with another device file.
[ 80.863] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.863] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.863] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.863] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.863] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.863] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.863] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.864] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.864] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.864] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 80.864] (**) Option "xkb_rules" "evdev"
[ 80.864] (**) Option "xkb_model" "pc105"
[ 80.864] (**) Option "xkb_layout" "fr"
[ 80.864] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 80.864] (II) No input driver specified, ignoring this device.
[ 80.864] (II) This device may have been added with another device file.
[ 81.048] (II) evdev: AT Translated Set 2 keyboard: Close
[ 81.048] (II) UnloadModule: "evdev"
[ 81.048] (II) evdev: USB OPTICAL MOUSE: Close
[ 81.048] (II) UnloadModule: "evdev"
[ 81.048] (II) evdev: Power Button: Close
[ 81.048] (II) UnloadModule: "evdev"
[ 81.048] (II) evdev: Power Button: Close
[ 81.048] (II) UnloadModule: "evdev"
[ 81.335] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 81.339] (EE) Server terminated successfully (0). Closing log file.
Là je dois dire que je ne comprend pas d'où peut provenir l'erreur, j'ai reinstallé les drivers (proprio), essayé sous le noyau 3.2 mais rien n'a faire.
D'autant plus que je n'ai rien remarqué d'anormal sauf lors de la mise à jour de libgtk3-bin y a un problème avec le remplacement de quelque chose (var/?/gtk3.8.tar à la place d'autre chose quelque part mais c'est pas autorisé je recopie le message d'erreur dès que je l'ai)
Qu'en pensez-vous ? 
Portable i7 7700HQ, 16Go RAM, GTX 1050Ti, MX 500 Crucial
Intel i7-4790 - 12Go RAM - GTX460
Intel i7-6700 - 8Go RAM - AMD R9 280X 3Go - SSD 850Evo
Odroid C2, Raspberry Pi Zero
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
