Salut les debianeux.
Depuis peu, j'ai quelques problèmes avec un disque : lenteurs à copier des fichiers, disque monté mais illisible (I/O error)...
Je lance un :
et j'obtiens :
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD10EALS-00Z8A0
Serial Number: WD-WCATR2982642
LU WWN Device Id: 5 0014ee 204eb0125
Firmware Version: 05.01D05
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Oct 31 06:35:03 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (16800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 194) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 199 195 051 Pre-fail Always - 493
3 Spin_Up_Time 0x0027 229 171 021 Pre-fail Always - 1508
4 Start_Stop_Count 0x0032 075 075 000 Old_age Always - 25995
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 25949
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 075 075 000 Old_age Always - 25991
192 Power-Off_Retract_Count 0x0032 167 167 000 Old_age Always - 25376
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 618
194 Temperature_Celsius 0x0022 106 094 000 Old_age Always - 41
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 90
198 Offline_Uncorrectable 0x0030 200 199 000 Old_age Offline - 89
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 87
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 25948 504768
# 2 Extended offline Completed: read failure 90% 25948 504768
# 3 Short offline Completed: read failure 90% 25948 504768
# 4 Extended offline Completed: read failure 90% 25948 504768
# 5 Extended offline Completed: read failure 90% 23619 504768
# 6 Short offline Completed: read failure 90% 23614 504768
# 7 Short offline Aborted by host 90% 23614 -
# 8 Short offline Completed: read failure 90% 23614 504768
# 9 Short offline Completed: read failure 90% 23614 504768
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Je comprends bien qu'il y a un problème sur quelque secteur.
J'ai lancé un test long mais il me faut attendre 3 heures.
Vous avez des conseils pour réparer/contourner ?
Dernière modification par Papadakis (30-11-2014 00:01:54)
Le désordre, c'est l'ordre, moins le pouvoir.