Vous n'êtes pas identifié(e).
Au reboot, le couple driver/noyau fait son effet mes TTY sont dans une résolution normale, le deuxième écran est activable...
tant et si bien que je désinstalle le noyau fourni avec wheezy (ai-je bien fait ? pas sur...)
Mais arrivé sur le burreau graphique les performances ne sont pas à la hauteur de ce à quoi je m'attendais, (gnome en restreint, kde refuse tout effet graphique que ceux par défaut, avec même une erreur pour l'un de ceux par défaut, conernant les info de chargement, que j'ai fini par désactiver pour accélérer le démarage)
Comme je ne savais pas comment consulter le driver utilisé par le serveur X, je décide de blacklister "nouveau" par acquis de conscience. (oui je sais le nom de fichier est un peu trop générique, mais je considère cette install comme un environement de développement, je m'engage à publier une procédure propre avant de cliquer sur "résolu" ;-)
Outre le fait que les deux bureau graphiques testé fonctionnent en mode restreint, (ce qui ne me semble pas proportionnel à la capacité du chipset) la commande suivante (et surtout son retour) m'a confirmé que quelque chose d'anormal se tramait en coulisse.
J'ai tenté de créer un fichier un fichier de configuration X pour intel, je ne suis pas très à l'aise avec xorg, c'est peut être un coup d'épée dans l'eau, ou peut être manque-t'il quelque chose ici !
/usr/share/X11/xorg.conf.d/20-intel.conf :
Voici le contenu de mon Xorg.0.log (scrollbox en bbcode ??):
[ 17.664]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 17.664] X Protocol Version 11, Revision 0
[ 17.664] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[ 17.664] Current Operating System: Linux DEBinattendu-LT 3.16-0.bpo.3-amd64 #1 SMP Debian 3.16.5-1~bpo70+1 (2014-11-02) x86_64
[ 17.664] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-0.bpo.3-amd64 root=UUID=de84e945-11f4-48cf-a16a-99acab52fdc2 ro quiet
[ 17.664] Build Date: 17 December 2013 07:37:58PM
[ 17.664] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>)
[ 17.664] Current version of pixman: 0.26.0
[ 17.664] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.664] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.664] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 7 12:22:04 2014
[ 17.695] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.770] (==) No Layout section. Using the first Screen section.
[ 17.770] (==) No screen section available. Using defaults.
[ 17.770] (**) |-->Screen "Default Screen Section" (0)
[ 17.770] (**) | |-->Monitor "<default monitor>"
[ 17.770] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 17.770] (**) | |-->Device "Card0"
[ 17.770] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.770] (==) Automatically adding devices
[ 17.770] (==) Automatically enabling devices
[ 17.816] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 17.816] Entry deleted from font path.
[ 17.862] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 17.862] Entry deleted from font path.
[ 17.863] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 17.863] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.863] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.863] (II) Loader magic: 0x7f3ea056eae0
[ 17.863] (II) Module ABI versions:
[ 17.863] X.Org ANSI C Emulation: 0.4
[ 17.863] X.Org Video Driver: 12.1
[ 17.863] X.Org XInput driver : 16.0
[ 17.863] X.Org Server Extension : 6.0
[ 17.863] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 17.863] (--) PCI: (0:1:0:0) 10de:1391:1043:11cd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 17.863] (II) Open ACPI successful (/var/run/acpid.socket)
[ 17.863] (II) LoadModule: "extmod"
[ 17.889] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 17.908] (II) Module extmod: vendor="X.Org Foundation"
[ 17.908] compiled for 1.12.4, module version = 1.0.0
[ 17.908] Module class: X.Org Server Extension
[ 17.908] ABI class: X.Org Server Extension, version 6.0
[ 17.908] (II) Loading extension SELinux
[ 17.908] (II) Loading extension MIT-SCREEN-SAVER
[ 17.908] (II) Loading extension XFree86-VidModeExtension
[ 17.908] (II) Loading extension XFree86-DGA
[ 17.908] (II) Loading extension DPMS
[ 17.908] (II) Loading extension XVideo
[ 17.908] (II) Loading extension XVideo-MotionCompensation
[ 17.908] (II) Loading extension X-Resource
[ 17.908] (II) LoadModule: "dbe"
[ 17.908] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 17.926] (II) Module dbe: vendor="X.Org Foundation"
[ 17.926] compiled for 1.12.4, module version = 1.0.0
[ 17.926] Module class: X.Org Server Extension
[ 17.926] ABI class: X.Org Server Extension, version 6.0
[ 17.926] (II) Loading extension DOUBLE-BUFFER
[ 17.926] (II) LoadModule: "glx"
[ 17.926] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.948] (II) Module glx: vendor="X.Org Foundation"
[ 17.948] compiled for 1.12.4, module version = 1.0.0
[ 17.948] ABI class: X.Org Server Extension, version 6.0
[ 17.948] (==) AIGLX enabled
[ 17.948] (II) Loading extension GLX
[ 17.948] (II) LoadModule: "record"
[ 17.948] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 17.949] (II) Module record: vendor="X.Org Foundation"
[ 17.949] compiled for 1.12.4, module version = 1.13.0
[ 17.949] Module class: X.Org Server Extension
[ 17.949] ABI class: X.Org Server Extension, version 6.0
[ 17.949] (II) Loading extension RECORD
[ 17.949] (II) LoadModule: "dri"
[ 17.949] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.952] (II) Module dri: vendor="X.Org Foundation"
[ 17.952] compiled for 1.12.4, module version = 1.0.0
[ 17.952] ABI class: X.Org Server Extension, version 6.0
[ 17.952] (II) Loading extension XFree86-DRI
[ 17.952] (II) LoadModule: "dri2"
[ 17.952] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.952] (II) Module dri2: vendor="X.Org Foundation"
[ 17.952] compiled for 1.12.4, module version = 1.2.0
[ 17.952] ABI class: X.Org Server Extension, version 6.0
[ 17.952] (II) Loading extension DRI2
[ 17.952] (II) LoadModule: "intel"
[ 18.053] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.116] (II) Module intel: vendor="X.Org Foundation"
[ 18.117] compiled for 1.12.4, module version = 2.21.15
[ 18.117] Module class: X.Org Video Driver
[ 18.117] ABI class: X.Org Video Driver, version 12.1
[ 18.117] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 18.117] (++) using VT number 7
[ 18.119] drmOpenDevice: node name is /dev/dri/card0
[ 18.119] drmOpenDevice: open result is 8, (OK)
[ 18.119] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 18.119] drmOpenDevice: node name is /dev/dri/card0
[ 18.119] drmOpenDevice: open result is 8, (OK)
[ 18.119] drmOpenByBusid: drmOpenMinor returns 8
[ 18.119] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 18.120] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.15-2~bpo70+1 (Aurelien Jarno <aurel32@debian.org>)
[ 18.121] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.121] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.121] (==) intel(0): RGB weight 888
[ 18.121] (==) intel(0): Default visual is TrueColor
[ 18.121] (**) intel(0): Option "AccelMethod" "sna"
[ 18.121] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 18.121] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 18.121] (**) intel(0): Framebuffer tiled
[ 18.121] (**) intel(0): Pixmaps tiled
[ 18.121] (**) intel(0): "Tear free" disabled
[ 18.121] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 18.121] (II) intel(0): Output eDP1 has no monitor section
[ 18.121] (--) intel(0): found backlight control interface intel_backlight (type 'raw')
[ 18.121] (II) intel(0): Output VGA1 has no monitor section
[ 18.121] (II) intel(0): Output DP1 has no monitor section
[ 18.121] (II) intel(0): Output HDMI1 has no monitor section
[ 18.121] (II) intel(0): Output HDMI2 has no monitor section
[ 18.121] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 18.121] (==) intel(0): DPI set to (96, 96)
[ 18.121] (II) Loading sub module "dri2"
[ 18.121] (II) LoadModule: "dri2"
[ 18.121] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.121] (II) Module dri2: vendor="X.Org Foundation"
[ 18.121] compiled for 1.12.4, module version = 1.2.0
[ 18.121] ABI class: X.Org Server Extension, version 6.0
[ 18.121] (==) Depth 24 pixmap format is 32 bpp
[ 18.136] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 18.136] (==) intel(0): Backing store disabled
[ 18.136] (==) intel(0): Silken mouse enabled
[ 18.136] (II) intel(0): HW Cursor enabled
[ 18.136] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.136] (==) intel(0): DPMS enabled
[ 18.136] (II) intel(0): [DRI2] Setup complete
[ 18.136] (II) intel(0): [DRI2] DRI driver: i965
[ 18.136] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.136] (==) intel(0): hotplug detection: "enabled"
[ 18.136] (--) RandR disabled
[ 18.136] (II) Initializing built-in extension Generic Event Extension
[ 18.136] (II) Initializing built-in extension SHAPE
[ 18.136] (II) Initializing built-in extension MIT-SHM
[ 18.136] (II) Initializing built-in extension XInputExtension
[ 18.136] (II) Initializing built-in extension XTEST
[ 18.136] (II) Initializing built-in extension BIG-REQUESTS
[ 18.136] (II) Initializing built-in extension SYNC
[ 18.136] (II) Initializing built-in extension XKEYBOARD
[ 18.136] (II) Initializing built-in extension XC-MISC
[ 18.136] (II) Initializing built-in extension SECURITY
[ 18.136] (II) Initializing built-in extension XINERAMA
[ 18.136] (II) Initializing built-in extension XFIXES
[ 18.136] (II) Initializing built-in extension RENDER
[ 18.136] (II) Initializing built-in extension RANDR
[ 18.136] (II) Initializing built-in extension COMPOSITE
[ 18.136] (II) Initializing built-in extension DAMAGE
[ 18.136] (II) SELinux: Disabled on system
[ 18.369] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.369] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.369] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.369] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.369] (II) AIGLX: Loaded and initialized i965
[ 18.369] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.370] (II) intel(0): switch to mode 1366x768@60.1 on pipe 0 using eDP1, position (0, 0), rotation normal
[ 18.400] (II) intel(0): Setting screen physical size to 361 x 203
[ 18.762] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 18.762] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.762] (II) LoadModule: "evdev"
[ 18.771] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.784] (II) Module evdev: vendor="X.Org Foundation"
[ 18.784] compiled for 1.12.1, module version = 2.7.0
[ 18.784] Module class: X.Org XInput Driver
[ 18.784] ABI class: X.Org XInput driver, version 16.0
[ 18.784] (II) Using input driver 'evdev' for 'Power Button'
[ 18.784] (**) Power Button: always reports core events
[ 18.784] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 18.784] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.784] (--) evdev: Power Button: Found keys
[ 18.784] (II) evdev: Power Button: Configuring as keyboard
[ 18.784] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 18.784] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.784] (**) Option "xkb_rules" "evdev"
[ 18.784] (**) Option "xkb_model" "pc105"
[ 18.784] (**) Option "xkb_layout" "fr"
[ 18.784] (**) Option "xkb_variant" "latin9"
[ 18.838] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 18.838] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.838] (II) Using input driver 'evdev' for 'Video Bus'
[ 18.838] (**) Video Bus: always reports core events
[ 18.838] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 18.838] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 18.838] (--) evdev: Video Bus: Found keys
[ 18.838] (II) evdev: Video Bus: Configuring as keyboard
[ 18.838] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19/event12"
[ 18.838] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 18.838] (**) Option "xkb_rules" "evdev"
[ 18.838] (**) Option "xkb_model" "pc105"
[ 18.838] (**) Option "xkb_layout" "fr"
[ 18.838] (**) Option "xkb_variant" "latin9"
[ 18.839] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 18.839] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.839] (II) Using input driver 'evdev' for 'Video Bus'
[ 18.839] (**) Video Bus: always reports core events
[ 18.839] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 18.839] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 18.839] (--) evdev: Video Bus: Found keys
[ 18.839] (II) evdev: Video Bus: Configuring as keyboard
[ 18.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:61/LNXVIDEO:00/input/input18/event11"
[ 18.839] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 18.839] (**) Option "xkb_rules" "evdev"
[ 18.839] (**) Option "xkb_model" "pc105"
[ 18.839] (**) Option "xkb_layout" "fr"
[ 18.839] (**) Option "xkb_variant" "latin9"
[ 18.839] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 18.839] (II) No input driver specified, ignoring this device.
[ 18.839] (II) This device may have been added with another device file.
[ 18.839] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 18.839] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 18.839] (II) Using input driver 'evdev' for 'Sleep Button'
[ 18.839] (**) Sleep Button: always reports core events
[ 18.839] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 18.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 18.839] (--) evdev: Sleep Button: Found keys
[ 18.839] (II) evdev: Sleep Button: Configuring as keyboard
[ 18.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 18.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 18.839] (**) Option "xkb_rules" "evdev"
[ 18.839] (**) Option "xkb_model" "pc105"
[ 18.839] (**) Option "xkb_layout" "fr"
[ 18.839] (**) Option "xkb_variant" "latin9"
[ 18.839] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 18.839] (II) No input driver specified, ignoring this device.
[ 18.839] (II) This device may have been added with another device file.
[ 18.839] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 18.839] (II) No input driver specified, ignoring this device.
[ 18.839] (II) This device may have been added with another device file.
[ 18.840] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 18.840] (II) No input driver specified, ignoring this device.
[ 18.840] (II) This device may have been added with another device file.
[ 18.840] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[ 18.840] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 18.840] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 18.840] (**) USB Optical Mouse: always reports core events
[ 18.840] (**) evdev: USB Optical Mouse: Device: "/dev/input/event1"
[ 18.840] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7
[ 18.840] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 18.840] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 18.840] (--) evdev: USB Optical Mouse: Found relative axes
[ 18.840] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 18.840] (--) evdev: USB Optical Mouse: Found absolute axes
[ 18.840] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist.
[ 18.840] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 18.840] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 18.840] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 18.840] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1BCF:0007.0001/input/input5/event1"
[ 18.840] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 18.840] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 18.840] (WW) evdev: USB Optical Mouse: ignoring absolute axes.
[ 18.840] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 18.840] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 18.840] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 18.840] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 18.840] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 18.840] (II) No input driver specified, ignoring this device.
[ 18.840] (II) This device may have been added with another device file.
[ 18.840] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event10)
[ 18.840] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 18.840] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[ 18.840] (**) USB2.0 UVC HD Webcam: always reports core events
[ 18.840] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event10"
[ 18.840] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x13d3 Product 0x5188
[ 18.840] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[ 18.840] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[ 18.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input17/event10"
[ 18.840] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 11)
[ 18.840] (**) Option "xkb_rules" "evdev"
[ 18.840] (**) Option "xkb_model" "pc105"
[ 18.840] (**) Option "xkb_layout" "fr"
[ 18.840] (**) Option "xkb_variant" "latin9"
[ 18.841] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 18.841] (II) No input driver specified, ignoring this device.
[ 18.841] (II) This device may have been added with another device file.
[ 18.841] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 18.841] (II) No input driver specified, ignoring this device.
[ 18.841] (II) This device may have been added with another device file.
[ 18.841] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
[ 18.841] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 18.841] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 18.841] (**) Asus WMI hotkeys: always reports core events
[ 18.841] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event6"
[ 18.841] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 18.841] (--) evdev: Asus WMI hotkeys: Found keys
[ 18.841] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 18.841] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input10/event6"
[ 18.841] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 18.841] (**) Option "xkb_rules" "evdev"
[ 18.841] (**) Option "xkb_model" "pc105"
[ 18.841] (**) Option "xkb_layout" "fr"
[ 18.841] (**) Option "xkb_variant" "latin9"
[ 18.841] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.841] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.841] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.841] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.841] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.841] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 18.841] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 18.841] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.841] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.841] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 18.841] (**) Option "xkb_rules" "evdev"
[ 18.841] (**) Option "xkb_model" "pc105"
[ 18.841] (**) Option "xkb_layout" "fr"
[ 18.841] (**) Option "xkb_variant" "latin9"
[ 18.841] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 18.841] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 18.841] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 18.841] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 18.841] (II) LoadModule: "synaptics"
[ 18.842] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 18.893] (II) Module synaptics: vendor="X.Org Foundation"
[ 18.893] compiled for 1.12.4, module version = 1.8.0
[ 18.893] Module class: X.Org XInput Driver
[ 18.893] ABI class: X.Org XInput driver, version 16.0
[ 18.893] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 18.893] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 18.893] (**) Option "Device" "/dev/input/event9"
[ 18.996] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 18.996] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[ 18.996] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 18.996] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 18.996] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 18.996] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 18.996] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 18.996] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 18.996] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 18.996] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 19.060] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event9"
[ 19.060] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 19.060] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 19.060] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 19.060] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[ 19.060] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 19.060] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 19.060] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 19.060] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 19.060] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 19.060] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 19.060] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 19.060] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 19.060] (II) No input driver specified, ignoring this device.
[ 19.060] (II) This device may have been added with another device file.
[ 19.061] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event16)
[ 19.061] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 19.061] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 19.061] (**) ACPI Virtual Keyboard Device: always reports core events
[ 19.061] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event16"
[ 19.061] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 19.061] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 19.061] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 19.061] (**) Option "config_info" "udev:/sys/devices/virtual/input/input23/event16"
[ 19.061] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15)
[ 19.061] (**) Option "xkb_rules" "evdev"
[ 19.061] (**) Option "xkb_model" "pc105"
[ 19.061] (**) Option "xkb_layout" "fr"
[ 19.061] (**) Option "xkb_variant" "latin9"
[ 35.634] (II) intel(0): EDID vendor "AUO", prod id 18412
[ 35.634] (II) intel(0): Printing DDC gathered Modelines:
[ 35.634] (II) intel(0): Modeline "1366x768"x0.0 76.30 1366 1404 1426 1592 768 771 777 798 -hsync -vsync (47.9 kHz eP)
[ 1255.409] (II) intel(0): switch to mode 1366x768@60.1 on pipe 0 using eDP1, position (0, 0), rotation normal
[ 1316.123] (II) intel(0): switch to mode 1366x768@60.1 on pipe 0 using eDP1, position (0, 0), rotation normal
-----
edit (coquille sur une commande)
Dernière modification par inattendu (07-11-2014 15:39:24)
----
« Pour triompher, le mal n’a besoin que de l’inaction des gens de bien. »
Edmund Burke
Hors ligne
tant et si bien que je désinstalle le noyau fourni avec wheezy (ai-je bien fait ? pas sur...)
Hé bien ça dépend.
Quand tu installeras Bumblebee, il se chargera d'installer le pilote nvidia (si tu ne choisis pas le pilote libre).
Il aura besoin de dkms pour compiler le module pour tous les noyaux présents, ce qui nécessite les headers correspondant à ces noyaux.
En conclusion, seulement si tu es certain que ce noyau-là ne convient pas, c'est ok pour le supprimer.
Pour les erreurs rencontrées, je ne vois pas.
Hors ligne
Si tu es certain que ce noyau-là ne convient pas, c'est ok pour le supprimer.
Justement, il me semble que l'installation de bumblebee-nvidia même dans le dépot backports me réinstalle le noyeau stable actuel.
Cependant, comme j'ai besoin du noyau testing pour faire fonctionner mon chipset, réinstaller le noyau stable pour pouvoir utiliser bumblebee et le driver nvidia semble problématique.
Comme on choisi sous quel noyau on démarre, et que je démarrerai sur le noyau testing, bumblebee risque de ne pas fonctionner puis ce que le noyau dont il semble avoir "besoin" n'est pas chargé...
La suite s'annonce palpitante... cela dit comme énoncé dans mon premier post, je souhaite voir ce chipset délivrer sa puissance optimale avant de venir chatouiller ma carte graphique et le portage linux de optimus.
Oui cette erreur est particulièrement peu documenté... et pourtant elle aboutit sur toutes mes tentatives.
Dernière modification par inattendu (08-11-2014 13:05:58)
----
« Pour triompher, le mal n’a besoin que de l’inaction des gens de bien. »
Edmund Burke
Hors ligne