logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 29-05-2015 12:54:26

Mugen
Membre
Distrib. : Debian Bookworm
Noyau : Linux 6.1.0-9-amd64
(G)UI : Mate
Inscription : 04-02-2014

Disque dur prêt à crasher ?

Bonjour
Au démarrage de debian j'ai vu des messages de ce style :

debian systemd-fsck[415]: Disque_Dur_1_To: l'entrée « photo-925.jpg » dans /PHOTOS/2013 (48644098) a un i-noeud effacé/non utilisé 48627803. EFFACÉ.



et donc ce fichier a été effacé et quelques autres aussi , heureusement j'ai des copies sur un autre disque.
Dois je m'inquiéter et changer le disque dur ?


mon ancien pseudo : bartaba

Hors ligne

#2 29-05-2015 13:03:39

Anonyme-8
Invité

Re : Disque dur prêt à crasher ?

#3 29-05-2015 14:51:19

Mugen
Membre
Distrib. : Debian Bookworm
Noyau : Linux 6.1.0-9-amd64
(G)UI : Mate
Inscription : 04-02-2014

Re : Disque dur prêt à crasher ?

ça a l'air OK non ?

# smartctl --all /dev/sdc
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3
Device Model:     SAMSUNG HD103SJ
Serial Number:    S246J90Z711161
LU WWN Device Id: 5 0024e9 202dd685c
Firmware Version: 1AJ10001
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Fri May 29 15:48:18 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error aborted command
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
          was completed without error.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    ( 9540) seconds.
Offline data collection
capabilities:        (0x5b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          No Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 159) minutes.
SCT capabilities:          (0x003f) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       50
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   072   070   025    Pre-fail  Always       -       8766
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5708
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       16214
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   095   095   000    Old_age   Always       -       5704
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       1
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   063   054   000    Old_age   Always       -       37 (Min/Max 15/47)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   ---    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   099   099   ---    Old_age   Always       -       1036
200 Multi_Zone_Error_Rate   0x002a   100   100   ---    Old_age   Always       -       185
223 Load_Retry_Count        0x0032   252   252   ---    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   100   100   ---    Old_age   Always       -       5717

SMART Error Log Version: 1
ATA Error Count: 1036 (device log contains only the most recent five errors)
  CR = Command Register [HEX]
  FR = Features Register [HEX]
  SC = Sector Count Register [HEX]
  SN = Sector Number Register [HEX]
  CL = Cylinder Low Register [HEX]
  CH = Cylinder High Register [HEX]
  DH = Device/Head Register [HEX]
  DC = Device Command Register [HEX]
  ER = Error register [HEX]
  ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1036 occurred at disk power-on lifetime: 16214 hours (675 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 4f c2 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d1 01 01 4f c2 00 08      00:00:04.586  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  b0 d1 01 01 4f c2 00 08      00:00:04.586  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  b0 d0 01 00 4f c2 00 08      00:00:04.586  SMART READ DATA
  ec 00 01 00 00 00 00 08      00:00:04.586  IDENTIFY DEVICE
  ec 00 01 00 00 00 00 08      00:00:04.586  IDENTIFY DEVICE

Error 1035 occurred at disk power-on lifetime: 16094 hours (670 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 4f c2 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d1 01 00 4f c2 00 08      00:00:07.362  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  b0 d1 01 00 4f c2 00 08      00:00:07.362  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  e5 00 00 00 00 00 00 08      00:00:07.362  CHECK POWER MODE
  ec 00 01 00 00 00 00 08      00:00:07.362  IDENTIFY DEVICE
  b0 da 00 00 4f c2 00 08      00:00:05.563  SMART RETURN STATUS

Error 1034 occurred at disk power-on lifetime: 16073 hours (669 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 e0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec ff 01 01 00 00 e0 00      00:00:00.020  IDENTIFY DEVICE
  a1 ff 01 01 00 00 e0 00      00:00:00.020  IDENTIFY PACKET DEVICE

Error 1033 occurred at disk power-on lifetime: 15992 hours (666 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 4f c2 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d0 01 00 4f c2 00 08      00:00:10.977  SMART READ DATA
  b0 d0 01 00 4f c2 00 08      00:00:10.977  SMART READ DATA
  b0 d1 01 00 4f c2 00 08      00:00:10.977  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  e5 00 00 00 00 00 00 08      00:00:10.977  CHECK POWER MODE
  ec 00 01 00 00 00 00 08      00:00:10.977  IDENTIFY DEVICE

Error 1032 occurred at disk power-on lifetime: 15984 hours (666 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 08      00:00:20.445  IDENTIFY DEVICE
  ec 00 00 00 00 00 a0 08      00:00:20.445  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:20.445  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:00:20.445  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:20.445  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     16212         -
# 2  Short offline       Completed without error       00%     16212         -
# 3  Short offline       Completed without error       00%     11698         -
# 4  Short offline       Completed without error       00%     11698         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


mon ancien pseudo : bartaba

Hors ligne

#4 31-05-2015 11:48:17

Mugen
Membre
Distrib. : Debian Bookworm
Noyau : Linux 6.1.0-9-amd64
(G)UI : Mate
Inscription : 04-02-2014

Re : Disque dur prêt à crasher ?

une piste SVP ?
je ne sais pas interpréter le reour de cette commande

mon ancien pseudo : bartaba

Hors ligne

#5 31-05-2015 11:53:49

Anonyme
Invité

Re : Disque dur prêt à crasher ?

J'ai eu une tonne de lignes comme la tienne. Chez moi, c'était un problème de vidage de la corbeille et plantage (figée)de celle-ci. Reboot forcé et ces lignes au démarrage.
Donc je ne pense pas à un crash futur de ton disque wink

#6 31-05-2015 13:52:03

vv222
Administrateur
Lieu : Bretagne
Distrib. : Debian Sid
(G)UI : sway
Inscription : 18-11-2013
Site Web

Re : Disque dur prêt à crasher ?

Je ne vois rien d’inquiétant au niveau des retours SMART de ton disque.
Si problème il y a, je ne pense pas qu’il soit matériel.

Jouer sous Debian ? Facile !

Ceterum censeo Barum esse delendam

Hors ligne

#7 01-06-2015 15:10:02

Mugen
Membre
Distrib. : Debian Bookworm
Noyau : Linux 6.1.0-9-amd64
(G)UI : Mate
Inscription : 04-02-2014

Re : Disque dur prêt à crasher ?

merci
c'est quand même inquiétant que des fichiers s'effacent tout seuls comme ça hmm

mon ancien pseudo : bartaba

Hors ligne

Pied de page des forums