Pilote nvidia

smolski · 16-09-2015 18:02:05

Tchibâââ...

anonyme · 16-09-2015 18:23:02

commande

grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log

 

retour commande

[    21.039] (II) Module nouveau: vendor="X.Org Foundation"

[    21.039]  compiled for 1.16.0, module version = 1.0.11

[    21.039]  Module class: X.Org Video Driver

--

[    21.054] (II) Module modesetting: vendor="X.Org Foundation"

[    21.054]  compiled for 1.16.4, module version = 0.9.0

[    21.055]  Module class: X.Org Video Driver

--

[    21.059] (II) Module fbdev: vendor="X.Org Foundation"

[    21.059]  compiled for 1.15.99.904, module version = 0.4.4

[    21.059]  Module class: X.Org Video Driver

--

[    21.066] (II) Module vesa: vendor="X.Org Foundation"

[    21.066]  compiled for 1.15.99.904, module version = 2.3.3

[    21.066]  Module class: X.Org Video Driver

j'ai bien "nouveau" comme driver

ps: comme un boulet j ai reboot sans supprimer le xorg.conf me suis retrouve en console avec un clavier en anglais , bonjour l angoisse pour entrer le "mdp"
je coupe la machine et je change de carte graphique.

milou · 16-09-2015 18:24:49

... Le jus de malt ....

paskal · 16-09-2015 18:37:32

Purée ! Quelle bande de soiffards !

milou · 16-09-2015 18:42:18

anonyme · 16-09-2015 18:42:22

un peu de serieux svp hips

aptitude m'a enlevé aussi nvidia-detect , j ai du le reinstaller

~$ grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log

 

retour commande

[    21.784] (II) Module nouveau: vendor="X.Org Foundation"

[    21.784]  compiled for 1.16.0, module version = 1.0.11

[    21.784]  Module class: X.Org Video Driver

--

[    21.800] (II) Module modesetting: vendor="X.Org Foundation"

[    21.800]  compiled for 1.16.4, module version = 0.9.0

[    21.800]  Module class: X.Org Video Driver

--

[    21.804] (II) Module fbdev: vendor="X.Org Foundation"

[    21.804]  compiled for 1.15.99.904, module version = 0.4.4

[    21.804]  Module class: X.Org Video Driver

--

[    21.811] (II) Module vesa: vendor="X.Org Foundation"

[    21.811]  compiled for 1.15.99.904, module version = 2.3.3

[    21.811]  Module class: X.Org Video Driver

commande

 nvidia-detect

 

retour commande

Detected NVIDIA GPUs:

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G92 [GeForce 8800 GT] [10de:0611] (rev a2)

Your card is supported by the default drivers and legacy driver series 304.

It is recommended to install the

    nvidia-driver

package.

Dernière modification par anonyme (16-09-2015 18:42:59)

paskal · 16-09-2015 18:46:28

aptitude, hein ?

smolski · 16-09-2015 18:57:01

Y fall...hips... lait maitr'uneuh hips priorité sur ce hips paquet

Ah non, zut !

Dernière modification par smolski (16-09-2015 18:57:26)

anonyme · 16-09-2015 18:58:00

installation du driver 304.125
commande

 apt-get install nvidia-legacy-304xx-kernel-dkms nvidia-settings-legacy-304xx xserver-xorg-video-nvidia-legacy-304xx linux-headers-$(uname -r)

 

retour commande

Lecture des listes de paquets... Fait

Construction de l'arbre des dépendances       

Lecture des informations d'état... Fait

linux-headers-3.16.0-4-amd64 est déjà la plus récente version disponible.

linux-headers-3.16.0-4-amd64 passé en « installé manuellement ».

Les paquets supplémentaires suivants seront installés : 

  glx-alternative-mesa glx-alternative-nvidia glx-diversions libgl1-nvidia-legacy-304xx-glx nvidia-installer-cleanup nvidia-kernel-common

  nvidia-legacy-304xx-alternative nvidia-legacy-304xx-driver nvidia-support

Paquets suggérés :

  nvidia-driver

Paquets recommandés :

  libgl1-nvidia-legacy-304xx-glx-i386

Les NOUVEAUX paquets suivants seront installés :

  glx-alternative-mesa glx-alternative-nvidia glx-diversions libgl1-nvidia-legacy-304xx-glx nvidia-installer-cleanup nvidia-kernel-common

  nvidia-legacy-304xx-alternative nvidia-legacy-304xx-driver nvidia-legacy-304xx-kernel-dkms nvidia-settings-legacy-304xx nvidia-support

  xserver-xorg-video-nvidia-legacy-304xx

0 mis à jour, 12 nouvellement installés, 0 à enlever et 0 non mis à jour.

Il est nécessaire de prendre 14,0 Mo/14,0 Mo dans les archives.

Après cette opération, 78,0 Mo d'espace disque supplémentaires seront utilisés.

Souhaitez-vous continuer ? [O/n]

oui

Paramétrage de nvidia-settings-legacy-304xx (304.123-2) ...

Paramétrage de libgl1-nvidia-legacy-304xx-glx:amd64 (304.125-1) ...

Paramétrage de xserver-xorg-video-nvidia-legacy-304xx (304.125-1) ...

Paramétrage de nvidia-legacy-304xx-kernel-dkms (304.125-1) ...

Loading new nvidia-legacy-304xx-304.125 DKMS files...

First Installation: checking all kernels...

Building only for 3.16.0-4-amd64

Building initial module for 3.16.0-4-amd64

Done.

nvidia-legacy-304xx:

Running module version sanity check.

 - Original module

   - No original module exists within this kernel

 - Installation

   - Installing to /lib/modules/3.16.0-4-amd64/updates/dkms/

depmod.........

DKMS: install completed.

Paramétrage de nvidia-legacy-304xx-driver (304.125-1) ...

Traitement des actions différées (« triggers ») pour libc-bin (2.19-18+deb8u1) ...

Traitement des actions différées (« triggers ») pour initramfs-tools (0.120) ...

update-initramfs: Generating /boot/initrd.img-3.16.0-4-amd64

Traitement des actions différées (« triggers ») pour systemd (215-17+deb8u2) ...

Traitement des actions différées (« triggers ») pour menu (2.1.47) ...

Dernière modification par anonyme (16-09-2015 19:03:10)

paskal · 16-09-2015 18:58:43

Du lait ? J'y crois pas une seconde ...

anonyme · 16-09-2015 19:06:32

bon une grosse modif pour le 304 legacy heureusement que je teste .........

faut mettre cette ligne dans le tuto dans pilotes proprietaires legacy (vielles cartes)

apt-get install nvidia-legacy-304xx-kernel-dkms nvidia-settings-legacy-304xx xserver-xorg-video-nvidia-legacy-304xx linux-headers-$(uname -r)

 

j'oublie pas le xorg.conf ......

Section "Device"

        Identifier "Card0"

        Driver     "nvidia"

EndSection

et je reboot @++

Dernière modification par anonyme (16-09-2015 19:10:51)

anonyme · 16-09-2015 19:22:35

@milou
normalement pour les modifs c est terminé , tu demande au boss si ok et mise en application

commande

grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log

 

retour commande

[    22.381] (II) Module nvidia: vendor="NVIDIA Corporation"

[    22.381]  compiled for 4.0.2, module version = 1.0.0

[    22.381]  Module class: X.Org Video Driver

le Xorg.0.log

    21.171] 

X.Org X Server 1.16.4

Release Date: 2014-12-20

[    21.171] X Protocol Version 11, Revision 0

[    21.171] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian

[    21.171] Current Operating System: Linux debian5 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64

[    21.171] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=8a74aa04-508b-4464-bd65-4d18a2616709 ro quiet

[    21.171] Build Date: 11 February 2015  12:32:02AM

[    21.171] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 

[    21.171] Current version of pixman: 0.32.6

[    21.171]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    21.171] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    21.171] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 16 20:12:15 2015

[    21.198] (==) Using config file: "/etc/X11/xorg.conf"

[    21.198] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    21.244] (==) No Layout section.  Using the first Screen section.

[    21.244] (==) No screen section available. Using defaults.

[    21.244] (**) |-->Screen "Default Screen Section" (0)

[    21.244] (**) |   |-->Monitor "<default monitor>"

[    21.263] (==) No device specified for screen "Default Screen Section".

  Using the first device section listed.

[    21.263] (**) |   |-->Device "Card0"

[    21.263] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    21.263] (==) Automatically adding devices

[    21.263] (==) Automatically enabling devices

[    21.263] (==) Automatically adding GPU devices

[    21.313] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    21.313]  Entry deleted from font path.

[    21.346] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    21.346] (==) ModulePath set to "/usr/lib/xorg/modules"

[    21.346] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    21.356] (II) Loader magic: 0x7f9cc93a9d80

[    21.356] (II) Module ABI versions:

[    21.356]  X.Org ANSI C Emulation: 0.4

[    21.356]  X.Org Video Driver: 18.0

[    21.356]  X.Org XInput driver : 21.0

[    21.356]  X.Org Server Extension : 8.0

[    21.357] (II) xfree86: Adding drm device (/dev/dri/card0)

[    21.358] (--) PCI:*(0:1:0:0) 10de:0611:1043:826a rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072

[    21.360] (II) LoadModule: "glx"

[    21.407] (II) Loading /usr/lib/xorg/modules/linux/libglx.so

[    22.221] (II) Module glx: vendor="NVIDIA Corporation"

[    22.222]  compiled for 4.0.2, module version = 1.0.0

[    22.222]  Module class: X.Org Server Extension

[    22.222] (II) NVIDIA GLX Module  304.125  Mon Dec  1 20:22:48 PST 2014

[    22.222] (II) LoadModule: "nvidia"

[    22.279] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so

[    22.381] (II) Module nvidia: vendor="NVIDIA Corporation"

[    22.381]  compiled for 4.0.2, module version = 1.0.0

[    22.381]  Module class: X.Org Video Driver

[    22.400] (II) NVIDIA dlloader X Driver  304.125  Mon Dec  1 20:00:30 PST 2014

[    22.400] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[    22.400] (++) using VT number 7

[    22.410] (II) Loading sub module "fb"

[    22.410] (II) LoadModule: "fb"

[    22.410] (II) Loading /usr/lib/xorg/modules/libfb.so

[    22.428] (II) Module fb: vendor="X.Org Foundation"

[    22.428]  compiled for 1.16.4, module version = 1.0.0

[    22.428]  ABI class: X.Org ANSI C Emulation, version 0.4

[    22.428] (II) Loading sub module "wfb"

[    22.428] (II) LoadModule: "wfb"

[    22.428] (II) Loading /usr/lib/xorg/modules/libwfb.so

[    22.433] (II) Module wfb: vendor="X.Org Foundation"

[    22.433]  compiled for 1.16.4, module version = 1.0.0

[    22.433]  ABI class: X.Org ANSI C Emulation, version 0.4

[    22.433] (II) Loading sub module "ramdac"

[    22.433] (II) LoadModule: "ramdac"

[    22.433] (II) Module "ramdac" already built-in

[    22.457] (II) NVIDIA(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    22.457] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32

[    22.457] (==) NVIDIA(0): RGB weight 888

[    22.457] (==) NVIDIA(0): Default visual is TrueColor

[    22.457] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)

[    22.462] (**) NVIDIA(0): Enabling 2D acceleration

[    23.388] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    23.388] (II) NVIDIA(GPU-0):     stereo.

[    23.394] (II) NVIDIA(0): NVIDIA    21.171] 

X.Org X Server 1.16.4

Release Date: 2014-12-20

[    21.171] X Protocol Version 11, Revision 0

[    21.171] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian

[    21.171] Current Operating System: Linux debian5 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64

[    21.171] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=8a74aa04-508b-4464-bd65-4d18a2616709 ro quiet

[    21.171] Build Date: 11 February 2015  12:32:02AM

[    21.171] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 

[    21.171] Current version of pixman: 0.32.6

[    21.171]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    21.171] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    21.171] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 16 20:12:15 2015

[    21.198] (==) Using config file: "/etc/X11/xorg.conf"

[    21.198] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    21.244] (==) No Layout section.  Using the first Screen section.

[    21.244] (==) No screen section available. Using defaults.

[    21.244] (**) |-->Screen "Default Screen Section" (0)

[    21.244] (**) |   |-->Monitor "<default monitor>"

[    21.263] (==) No device specified for screen "Default Screen Section".

  Using the first device section listed.

[    21.263] (**) |   |-->Device "Card0"

[    21.263] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    21.263] (==) Automatically adding devices

[    21.263] (==) Automatically enabling devices

[    21.263] (==) Automatically adding GPU devices

[    21.313] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    21.313]  Entry deleted from font path.

[    21.346] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    21.346] (==) ModulePath set to "/usr/lib/xorg/modules"

[    21.346] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    21.356] (II) Loader magic: 0x7f9cc93a9d80

[    21.356] (II) Module ABI versions:

[    21.356]  X.Org ANSI C Emulation: 0.4

[    21.356]  X.Org Video Driver: 18.0

[    21.356]  X.Org XInput driver : 21.0

[    21.356]  X.Org Server Extension : 8.0

[    21.357] (II) xfree86: Adding drm device (/dev/dri/card0)

[    21.358] (--) PCI:*(0:1:0:0) 10de:0611:1043:826a rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072

[    21.360] (II) LoadModule: "glx"

[    21.407] (II) Loading /usr/lib/xorg/modules/linux/libglx.so

[    22.221] (II) Module glx: vendor="NVIDIA Corporation"

[    22.222]  compiled for 4.0.2, module version = 1.0.0

[    22.222]  Module class: X.Org Server Extension

[    22.222] (II) NVIDIA GLX Module  304.125  Mon Dec  1 20:22:48 PST 2014

[    22.222] (II) LoadModule: "nvidia"

[    22.279] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so

[    22.381] (II) Module nvidia: vendor="NVIDIA Corporation"

[    22.381]  compiled for 4.0.2, module version = 1.0.0

[    22.381]  Module class: X.Org Video Driver

[    22.400] (II) NVIDIA dlloader X Driver  304.125  Mon Dec  1 20:00:30 PST 2014

[    22.400] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[    22.400] (++) using VT number 7

[    22.410] (II) Loading sub module "fb"

[    22.410] (II) LoadModule: "fb"

[    22.410] (II) Loading /usr/lib/xorg/modules/libfb.so

[    22.428] (II) Module fb: vendor="X.Org Foundation"

[    22.428]  compiled for 1.16.4, module version = 1.0.0

[    22.428]  ABI class: X.Org ANSI C Emulation, version 0.4

[    22.428] (II) Loading sub module "wfb"

[    22.428] (II) LoadModule: "wfb"

[    22.428] (II) Loading /usr/lib/xorg/modules/libwfb.so

[    22.433] (II) Module wfb: vendor="X.Org Foundation"

[    22.433]  compiled for 1.16.4, module version = 1.0.0

[    22.433]  ABI class: X.Org ANSI C Emulation, version 0.4

[    22.433] (II) Loading sub module "ramdac"

[    22.433] (II) LoadModule: "ramdac"

[    22.433] (II) Module "ramdac" already built-in

[    22.457] (II) NVIDIA(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    22.457] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32

[    22.457] (==) NVIDIA(0): RGB weight 888

[    22.457] (==) NVIDIA(0): Default visual is TrueColor

[    22.457] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)

[    22.462] (**) NVIDIA(0): Enabling 2D acceleration

[    23.388] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    23.388] (II) NVIDIA(GPU-0):     stereo.

[    23.394] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)

[    23.394] (--) NVIDIA(0): Memory: 1048576 kBytes

[    23.394] (--) NVIDIA(0): VideoBIOS: 62.92.29.00.00

[    23.394] (II) NVIDIA(0): Detected PCI Express Link width: 16X

[    23.394] (--) NVIDIA(0): Interlaced video modes are supported on this GPU

[    23.399] (--) NVIDIA(0): Valid display device(s) on GeForce 8800 GT at PCI:1:0:0

[    23.399] (--) NVIDIA(0):     Acer B193W (CRT-0) (connected)

[    23.399] (--) NVIDIA(0):     CRT-1

[    23.399] (--) NVIDIA(0):     TV-0

[    23.399] (--) NVIDIA(0):     DFP-0

[    23.399] (--) NVIDIA(0):     DFP-1

[    23.399] (--) NVIDIA(0): Acer B193W (CRT-0): 400.0 MHz maximum pixel clock

[    23.399] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock

[    23.399] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock

[    23.399] (--) NVIDIA(0): TV encoder: Unknown

[    23.400] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock

[    23.400] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS

[    23.400] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock

[    23.400] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS

[    23.400] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    23.400] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    23.400] (**) NVIDIA(0):     enabled on all display devices.)

[    23.402] (==) NVIDIA(0): 

[    23.402] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"

[    23.402] (==) NVIDIA(0):     will be used as the requested mode.

[    23.402] (==) NVIDIA(0): 

[    23.402] (II) NVIDIA(0): Validated MetaModes:

[    23.402] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"

[    23.402] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900

[    23.450] (--) NVIDIA(0): DPI set to (91, 91); computed from "UseEdidDpi" X config

[    23.450] (--) NVIDIA(0):     option

[    23.450] (--) Depth 24 pixmap format is 32 bpp

[    23.450] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.

[    23.459] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"

[    23.562] (==) NVIDIA(0): Disabling shared memory pixmaps

[    23.562] (==) NVIDIA(0): Backing store enabled

[    23.562] (==) NVIDIA(0): Silken mouse enabled

[    23.571] (==) NVIDIA(0): DPMS enabled

[    23.572] (II) Loading sub module "dri2"

[    23.572] (II) LoadModule: "dri2"

[    23.572] (II) Module "dri2" already built-in

[    23.572] (II) NVIDIA(0): [DRI2] Setup complete

[    23.572] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia

[    23.572] (--) RandR disabled

[    23.588] (II) SELinux: Disabled on system

[    23.589] (II) Initializing extension GLX

[    23.589] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event5)

[    24.450] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    24.450] (II) LoadModule: "evdev"

[    24.450] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[    24.545] (II) Module evdev: vendor="X.Org Foundation"

[    24.545]  compiled for 1.16.0, module version = 2.9.0

[    24.545]  Module class: X.Org XInput Driver

[    24.545]  ABI class: X.Org XInput driver, version 21.0

[    24.545] (II) Using input driver 'evdev' for 'Power Button'

[    24.545] (**) Power Button: always reports core events

[    24.545] (**) evdev: Power Button: Device: "/dev/input/event5"

[    24.545] (--) evdev: Power Button: Vendor 0 Product 0x1

[    24.546] (--) evdev: Power Button: Found keys

[    24.546] (II) evdev: Power Button: Configuring as keyboard

[    24.546] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"

[    24.546] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    24.546] (**) Option "xkb_rules" "evdev"

[    24.546] (**) Option "xkb_model" "pc105"

[    24.546] (**) Option "xkb_layout" "fr"

[    24.546] (**) Option "xkb_variant" "latin9"

[    24.546] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.603] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[    24.603] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    24.603] (II) Using input driver 'evdev' for 'Power Button'

[    24.603] (**) Power Button: always reports core events

[    24.603] (**) evdev: Power Button: Device: "/dev/input/event4"

[    24.603] (--) evdev: Power Button: Vendor 0 Product 0x1

[    24.603] (--) evdev: Power Button: Found keys

[    24.603] (II) evdev: Power Button: Configuring as keyboard

[    24.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"

[    24.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[    24.603] (**) Option "xkb_rules" "evdev"

[    24.603] (**) Option "xkb_model" "pc105"

[    24.603] (**) Option "xkb_layout" "fr"

[    24.603] (**) Option "xkb_variant" "latin9"

[    24.603] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.604] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/event0)

[    24.604] (**) USB USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    24.604] (II) Using input driver 'evdev' for 'USB USB Keyboard'

[    24.604] (**) USB USB Keyboard: always reports core events

[    24.604] (**) evdev: USB USB Keyboard: Device: "/dev/input/event0"

[    24.604] (--) evdev: USB USB Keyboard: Vendor 0x1a2c Product 0xc21

[    24.604] (--) evdev: USB USB Keyboard: Found keys

[    24.604] (II) evdev: USB USB Keyboard: Configuring as keyboard

[    24.604] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.1/5-2.1:1.0/0003:1A2C:0C21.0001/input/input1/event0"

[    24.604] (II) XINPUT: Adding extended input device "USB USB Keyboard" (type: KEYBOARD, id 8)

[    24.604] (**) Option "xkb_rules" "evdev"

[    24.604] (**) Option "xkb_model" "pc105"

[    24.604] (**) Option "xkb_layout" "fr"

[    24.604] (**) Option "xkb_variant" "latin9"

[    24.604] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.605] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/event1)

[    24.605] (**) USB USB Keyboard: Applying InputClass "evdev pointer catchall"

[    24.605] (**) USB USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    24.605] (II) Using input driver 'evdev' for 'USB USB Keyboard'

[    24.605] (**) USB USB Keyboard: always reports core events

[    24.605] (**) evdev: USB USB Keyboard: Device: "/dev/input/event1"

[    24.605] (--) evdev: USB USB Keyboard: Vendor 0x1a2c Product 0xc21

[    24.605] (--) evdev: USB USB Keyboard: Found 3 mouse buttons

[    24.605] (--) evdev: USB USB Keyboard: Found scroll wheel(s)

[    24.605] (--) evdev: USB USB Keyboard: Found relative axes

[    24.605] (--) evdev: USB USB Keyboard: Found x and y relative axes

[    24.605] (--) evdev: USB USB Keyboard: Found absolute axes

[    24.605] (II) evdev: USB USB Keyboard: Forcing absolute x/y axes to exist.

[    24.605] (--) evdev: USB USB Keyboard: Found keys

[    24.605] (II) evdev: USB USB Keyboard: Configuring as mouse

[    24.606] (II) evdev: USB USB Keyboard: Configuring as keyboard

[    24.606] (II) evdev: USB USB Keyboard: Adding scrollwheel support

[    24.606] (**) evdev: USB USB Keyboard: YAxisMapping: buttons 4 and 5

[    24.606] (**) evdev: USB USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    24.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.1/5-2.1:1.1/0003:1A2C:0C21.0002/input/input2/event1"

[    24.606] (II) XINPUT: Adding extended input device "USB USB Keyboard" (type: KEYBOARD, id 9)

[    24.606] (**) Option "xkb_rules" "evdev"

[    24.606] (**) Option "xkb_model" "pc105"

[    24.606] (**) Option "xkb_layout" "fr"

[    24.606] (**) Option "xkb_variant" "latin9"

[    24.606] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.618] (II) evdev: USB USB Keyboard: initialized for relative axes.

[    24.618] (WW) evdev: USB USB Keyboard: ignoring absolute axes.

[    24.618] (**) USB USB Keyboard: (accel) keeping acceleration scheme 1

[    24.618] (**) USB USB Keyboard: (accel) acceleration profile 0

[    24.618] (**) USB USB Keyboard: (accel) acceleration factor: 2.000

[    24.618] (**) USB USB Keyboard: (accel) acceleration threshold: 4

[    24.618] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/mouse0)

[    24.618] (II) No input driver specified, ignoring this device.

[    24.618] (II) This device may have been added with another device file.

[    24.619] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/event2)

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"

[    24.619] (II) Using input driver 'evdev' for 'Microsoft  Microsoft Basic Optical Mouse v2.0 '

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : always reports core events

[    24.619] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event2"

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found relative axes

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes

[    24.619] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Configuring as mouse

[    24.619] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support

[    24.619] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5

[    24.619] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    24.619] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.2/5-2.2:1.0/0003:045E:00CB.0003/input/input3/event2"

[    24.619] (II) XINPUT: Adding extended input device "Microsoft  Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 10)

[    24.619] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4

[    24.619] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/mouse1)

[    24.619] (II) No input driver specified, ignoring this device.

[    24.619] (II) This device may have been added with another device file.

[    24.620] (II) config/udev: Adding input device No brand 2Port KVMSwicther (/dev/input/event3)

[    24.620] (**) No brand 2Port KVMSwicther: Applying InputClass "evdev keyboard catchall"

[    24.620] (II) Using input driver 'evdev' for 'No brand 2Port KVMSwicther'

[    24.620] (**) No brand 2Port KVMSwicther: always reports core events

[    24.620] (**) evdev: No brand 2Port KVMSwicther: Device: "/dev/input/event3"

[    24.620] (--) evdev: No brand 2Port KVMSwicther: Vendor 0x10d5 Product 0x55a2

[    24.620] (--) evdev: No brand 2Port KVMSwicther: Found keys

[    24.620] (II) evdev: No brand 2Port KVMSwicther: Configuring as keyboard

[    24.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:10D5:55A2.0004/input/input4/event3"

[    24.620] (II) XINPUT: Adding extended input device "No brand 2Port KVMSwicther" (type: KEYBOARD, id 11)

[    24.620] (**) Option "xkb_rules" "evdev"

[    24.620] (**) Option "xkb_model" "pc105"

[    24.620] (**) Option "xkb_layout" "fr"

[    24.620] (**) Option "xkb_variant" "latin9"

[    24.620] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.621] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event9)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.621] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.621] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event11)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.621] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.622] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)

[    24.622] (II) No input driver specified, ignoring this device.

[    24.622] (II) This device may have been added with another device file.

[    24.622] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event8)

[    24.622] (II) No input driver specified, ignoring this device.

[    24.622] (II) This device may have been added with another device file.

[    24.622] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)

[    24.622] (II) No input driver specified, ignoring this device.

[    24.622] (II) This device may have been added with another device file.

[    34.540] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    34.541] (II) NVIDIA(GPU-0):     stereo.

[    34.541] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    34.541] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    34.541] (**) NVIDIA(0):     enabled on all display devices.)

[    42.205] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    42.205] (II) NVIDIA(GPU-0):     stereo.

[    42.205] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    42.205] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    42.205] (**) NVIDIA(0):     enabled on all display devices.)

[    62.143] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    62.144] (II) NVIDIA(GPU-0):     stereo.

[    62.144] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    62.144] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    62.144] (**) NVIDIA(0):     enabled on all display devices.)

[    66.752] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    66.752] (II) NVIDIA(GPU-0):     stereo.

[    66.752] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    66.752] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    66.752] (**) NVIDIA(0):     enabled on all display devices.)

 GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)

[    23.394] (--) NVIDIA(0): Memory: 1048576 kBytes

[    23.394] (--) NVIDIA(0): VideoBIOS: 62.92.29.00.00

[    23.394] (II) NVIDIA(0): Detected PCI Express Link width: 16X

[    23.394] (--) NVIDIA(0): Interlaced video modes are supported on this GPU

[    23.399] (--) NVIDIA(0): Valid display device(s) on GeForce 8800 GT at PCI:1:0:0

[    23.399] (--) NVIDIA(0):     Acer B193W (CRT-0) (connected)

[    23.399] (--) NVIDIA(0):     CRT-1

[    23.399] (--) NVIDIA(0):     TV-0

[    23.399] (--) NVIDIA(0):     DFP-0

[    23.399] (--) NVIDIA(0):     DFP-1

[    23.399] (--) NVIDIA(0): Acer B193W (CRT-0): 400.0 MHz maximum pixel clock

[    23.399] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock

[    23.399] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock

[    23.399] (--) NVIDIA(0): TV encoder: Unknown

[    23.400] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock

[    23.400] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS

[    23.400] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock

[    23.400] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS

[    23.400] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    23.400] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    23.400] (**) NVIDIA(0):     enabled on all display devices.)

[    23.402] (==) NVIDIA(0): 

[    23.402] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"

[    23.402] (==) NVIDIA(0):     will be used as the requested mode.

[    23.402] (==) NVIDIA(0): 

[    23.402] (II) NVIDIA(0): Validated MetaModes:

[    23.402] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"

[    23.402] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900

[    23.450] (--) NVIDIA(0): DPI set to (91, 91); computed from "UseEdidDpi" X config

[    23.450] (--) NVIDIA(0):     option

[    23.450] (--) Depth 24 pixmap format is 32 bpp

[    23.450] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.

[    23.459] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"

[    23.562] (==) NVIDIA(0): Disabling shared memory pixmaps

[    23.562] (==) NVIDIA(0): Backing store enabled

[    23.562] (==) NVIDIA(0): Silken mouse enabled

[    23.571] (==) NVIDIA(0): DPMS enabled

[    23.572] (II) Loading sub module "dri2"

[    23.572] (II) LoadModule: "dri2"

[    23.572] (II) Module "dri2" already built-in

[    23.572] (II) NVIDIA(0): [DRI2] Setup complete

[    23.572] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia

[    23.572] (--) RandR disabled

[    23.588] (II) SELinux: Disabled on system

[    23.589] (II) Initializing extension GLX

[    23.589] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event5)

[    24.450] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    24.450] (II) LoadModule: "evdev"

[    24.450] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[    24.545] (II) Module evdev: vendor="X.Org Foundation"

[    24.545]  compiled for 1.16.0, module version = 2.9.0

[    24.545]  Module class: X.Org XInput Driver

[    24.545]  ABI class: X.Org XInput driver, version 21.0

[    24.545] (II) Using input driver 'evdev' for 'Power Button'

[    24.545] (**) Power Button: always reports core events

[    24.545] (**) evdev: Power Button: Device: "/dev/input/event5"

[    24.545] (--) evdev: Power Button: Vendor 0 Product 0x1

[    24.546] (--) evdev: Power Button: Found keys

[    24.546] (II) evdev: Power Button: Configuring as keyboard

[    24.546] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"

[    24.546] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    24.546] (**) Option "xkb_rules" "evdev"

[    24.546] (**) Option "xkb_model" "pc105"

[    24.546] (**) Option "xkb_layout" "fr"

[    24.546] (**) Option "xkb_variant" "latin9"

[    24.546] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.603] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[    24.603] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    24.603] (II) Using input driver 'evdev' for 'Power Button'

[    24.603] (**) Power Button: always reports core events

[    24.603] (**) evdev: Power Button: Device: "/dev/input/event4"

[    24.603] (--) evdev: Power Button: Vendor 0 Product 0x1

[    24.603] (--) evdev: Power Button: Found keys

[    24.603] (II) evdev: Power Button: Configuring as keyboard

[    24.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"

[    24.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[    24.603] (**) Option "xkb_rules" "evdev"

[    24.603] (**) Option "xkb_model" "pc105"

[    24.603] (**) Option "xkb_layout" "fr"

[    24.603] (**) Option "xkb_variant" "latin9"

[    24.603] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.604] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/event0)

[    24.604] (**) USB USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    24.604] (II) Using input driver 'evdev' for 'USB USB Keyboard'

[    24.604] (**) USB USB Keyboard: always reports core events

[    24.604] (**) evdev: USB USB Keyboard: Device: "/dev/input/event0"

[    24.604] (--) evdev: USB USB Keyboard: Vendor 0x1a2c Product 0xc21

[    24.604] (--) evdev: USB USB Keyboard: Found keys

[    24.604] (II) evdev: USB USB Keyboard: Configuring as keyboard

[    24.604] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.1/5-2.1:1.0/0003:1A2C:0C21.0001/input/input1/event0"

[    24.604] (II) XINPUT: Adding extended input device "USB USB Keyboard" (type: KEYBOARD, id 8)

[    24.604] (**) Option "xkb_rules" "evdev"

[    24.604] (**) Option "xkb_model" "pc105"

[    24.604] (**) Option "xkb_layout" "fr"

[    24.604] (**) Option "xkb_variant" "latin9"

[    24.604] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.605] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/event1)

[    24.605] (**) USB USB Keyboard: Applying InputClass "evdev pointer catchall"

[    24.605] (**) USB USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    24.605] (II) Using input driver 'evdev' for 'USB USB Keyboard'

[    24.605] (**) USB USB Keyboard: always reports core events

[    24.605] (**) evdev: USB USB Keyboard: Device: "/dev/input/event1"

[    24.605] (--) evdev: USB USB Keyboard: Vendor 0x1a2c Product 0xc21

[    24.605] (--) evdev: USB USB Keyboard: Found 3 mouse buttons

[    24.605] (--) evdev: USB USB Keyboard: Found scroll wheel(s)

[    24.605] (--) evdev: USB USB Keyboard: Found relative axes

[    24.605] (--) evdev: USB USB Keyboard: Found x and y relative axes

[    24.605] (--) evdev: USB USB Keyboard: Found absolute axes

[    24.605] (II) evdev: USB USB Keyboard: Forcing absolute x/y axes to exist.

[    24.605] (--) evdev: USB USB Keyboard: Found keys

[    24.605] (II) evdev: USB USB Keyboard: Configuring as mouse

[    24.606] (II) evdev: USB USB Keyboard: Configuring as keyboard

[    24.606] (II) evdev: USB USB Keyboard: Adding scrollwheel support

[    24.606] (**) evdev: USB USB Keyboard: YAxisMapping: buttons 4 and 5

[    24.606] (**) evdev: USB USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    24.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.1/5-2.1:1.1/0003:1A2C:0C21.0002/input/input2/event1"

[    24.606] (II) XINPUT: Adding extended input device "USB USB Keyboard" (type: KEYBOARD, id 9)

[    24.606] (**) Option "xkb_rules" "evdev"

[    24.606] (**) Option "xkb_model" "pc105"

[    24.606] (**) Option "xkb_layout" "fr"

[    24.606] (**) Option "xkb_variant" "latin9"

[    24.606] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.618] (II) evdev: USB USB Keyboard: initialized for relative axes.

[    24.618] (WW) evdev: USB USB Keyboard: ignoring absolute axes.

[    24.618] (**) USB USB Keyboard: (accel) keeping acceleration scheme 1

[    24.618] (**) USB USB Keyboard: (accel) acceleration profile 0

[    24.618] (**) USB USB Keyboard: (accel) acceleration factor: 2.000

[    24.618] (**) USB USB Keyboard: (accel) acceleration threshold: 4

[    24.618] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/mouse0)

[    24.618] (II) No input driver specified, ignoring this device.

[    24.618] (II) This device may have been added with another device file.

[    24.619] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/event2)

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"

[    24.619] (II) Using input driver 'evdev' for 'Microsoft  Microsoft Basic Optical Mouse v2.0 '

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : always reports core events

[    24.619] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event2"

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found relative axes

[    24.619] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes

[    24.619] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Configuring as mouse

[    24.619] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support

[    24.619] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5

[    24.619] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    24.619] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.2/5-2.2:1.0/0003:045E:00CB.0003/input/input3/event2"

[    24.619] (II) XINPUT: Adding extended input device "Microsoft  Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 10)

[    24.619] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000

[    24.619] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4

[    24.619] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/mouse1)

[    24.619] (II) No input driver specified, ignoring this device.

[    24.619] (II) This device may have been added with another device file.

[    24.620] (II) config/udev: Adding input device No brand 2Port KVMSwicther (/dev/input/event3)

[    24.620] (**) No brand 2Port KVMSwicther: Applying InputClass "evdev keyboard catchall"

[    24.620] (II) Using input driver 'evdev' for 'No brand 2Port KVMSwicther'

[    24.620] (**) No brand 2Port KVMSwicther: always reports core events

[    24.620] (**) evdev: No brand 2Port KVMSwicther: Device: "/dev/input/event3"

[    24.620] (--) evdev: No brand 2Port KVMSwicther: Vendor 0x10d5 Product 0x55a2

[    24.620] (--) evdev: No brand 2Port KVMSwicther: Found keys

[    24.620] (II) evdev: No brand 2Port KVMSwicther: Configuring as keyboard

[    24.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:10D5:55A2.0004/input/input4/event3"

[    24.620] (II) XINPUT: Adding extended input device "No brand 2Port KVMSwicther" (type: KEYBOARD, id 11)

[    24.620] (**) Option "xkb_rules" "evdev"

[    24.620] (**) Option "xkb_model" "pc105"

[    24.620] (**) Option "xkb_layout" "fr"

[    24.620] (**) Option "xkb_variant" "latin9"

[    24.620] (**) Option "xkb_options" "lv3:ralt_switch"

[    24.621] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event9)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.621] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.621] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event11)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.621] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)

[    24.621] (II) No input driver specified, ignoring this device.

[    24.621] (II) This device may have been added with another device file.

[    24.622] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)

[    24.622] (II) No input driver specified, ignoring this device.

[    24.622] (II) This device may have been added with another device file.

[    24.622] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event8)

[    24.622] (II) No input driver specified, ignoring this device.

[    24.622] (II) This device may have been added with another device file.

[    24.622] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)

[    24.622] (II) No input driver specified, ignoring this device.

[    24.622] (II) This device may have been added with another device file.

[    34.540] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    34.541] (II) NVIDIA(GPU-0):     stereo.

[    34.541] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    34.541] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    34.541] (**) NVIDIA(0):     enabled on all display devices.)

[    42.205] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    42.205] (II) NVIDIA(GPU-0):     stereo.

[    42.205] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    42.205] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    42.205] (**) NVIDIA(0):     enabled on all display devices.)

[    62.143] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    62.144] (II) NVIDIA(GPU-0):     stereo.

[    62.144] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    62.144] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    62.144] (**) NVIDIA(0):     enabled on all display devices.)

[    66.752] (II) NVIDIA(GPU-0): Display (Acer B193W (CRT-0)) does not support NVIDIA 3D Vision

[    66.752] (II) NVIDIA(GPU-0):     stereo.

[    66.752] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display

[    66.752] (**) NVIDIA(0):     device Acer B193W (CRT-0) (Using EDID frequencies has been

[    66.752] (**) NVIDIA(0):     enabled on all display devices.)

une petite pensée pour Guy Béart ,
@++ je go tv

Dernière modification par anonyme (16-09-2015 19:49:43)

milou · 16-09-2015 19:52:07

Ok, on attend l'avis du boss comme tu dis ....

J'ai vu les modifs que tu as marquées sur le pad, je m'en occuperais.
Tu me mettras sur le pad où je dois placer la commande et son retour que tu as mis dans ton précédent message

++

smolski · 16-09-2015 21:19:42

C'est ok pour moi et j'suis pas bossu du tout... En plus !

anonyme · 16-09-2015 21:45:21

milou a écrit :

Ok, on attend l'avis du boss comme tu dis ....

J'ai vu les modifs que tu as marquées sur le pad, je m'en occuperais.
Tu me mettras sur le pad où je dois placer la commande et son retour que tu as mis dans ton précédent message

++

il y a 2 modifs sur le pad , je vois pas de quoi tu parle "la commande et son retour"
donne moi le no de post au pire .
normalement il n y que ces 2 indiqué sur le pad , comment supprimer les traces d un drivers propriétaire et l installation des tres vielles cartes avec le 304.
ps: c'est William Peel qui parle hips
vi selon l'importance du bosssssss je met plus ou moins de s

Dernière modification par anonyme (16-09-2015 21:46:42)

milou · 17-09-2015 08:27:06

Ok, j'ai relu le pad, je n'avais pas vu que la commande de ton #162 y était déjà, pourtant je n'avais pas bu ....

Je fais les modifs tout à l'heure

milou · 17-09-2015 10:16:04

Les modifications sont faîtes.
Tu vérifieras

anonyme · 17-09-2015 10:23:57

je regarde et je vérifie , j espère n'etre pas le seul a le faire

milou · 17-09-2015 10:24:56

Le boss comme tu dis, va bien y faire un petit tour ....

smolski · 17-09-2015 10:27:19

Chacun son tour qu'on a dit...

milou · 17-09-2015 10:28:13

anonyme · 17-09-2015 10:29:31

pour nvidia-detect vers la fin du tuto => ou une alternative à apt-cache

le terme est inexact , apt-cache donne la liste des cartes reconnues par le driver , nvidia-detect donne le nom de la carte installée dans la machine.

quelque chose a faire la surement

ps: bon c est de ma faute au depart hips ....

Dernière modification par anonyme (17-09-2015 10:33:27)

anonyme · 17-09-2015 10:31:25

smolski a écrit :

Chacun son tour qu'on a dit...

bon a toi maintenant

smolski · 17-09-2015 10:32:14

Attends, je composte mon billet et j'y vais...

milou · 17-09-2015 10:32:45

Tout le monde peut se tromper, le jus de malt aidant.....

Tu rectifieras sur le pad, je me chargerai des corrections sur la page wiki

Debian-facile

#151 16-09-2015 18:02:05

Re : Pilote nvidia

#152 16-09-2015 18:23:02

Re : Pilote nvidia

#153 16-09-2015 18:24:49

Re : Pilote nvidia

#154 16-09-2015 18:37:32

Re : Pilote nvidia

#155 16-09-2015 18:42:18

Re : Pilote nvidia

#156 16-09-2015 18:42:22

Re : Pilote nvidia

#157 16-09-2015 18:46:28

Re : Pilote nvidia

#158 16-09-2015 18:57:01

Re : Pilote nvidia

#159 16-09-2015 18:58:00

Re : Pilote nvidia

#160 16-09-2015 18:58:43

Re : Pilote nvidia

#161 16-09-2015 19:06:32

Re : Pilote nvidia

#162 16-09-2015 19:22:35

Re : Pilote nvidia

#163 16-09-2015 19:52:07

Re : Pilote nvidia

#164 16-09-2015 21:19:42

Re : Pilote nvidia

#165 16-09-2015 21:45:21

Re : Pilote nvidia

#166 17-09-2015 08:27:06

Re : Pilote nvidia

#167 17-09-2015 10:16:04

Re : Pilote nvidia

#168 17-09-2015 10:23:57

Re : Pilote nvidia

#169 17-09-2015 10:24:56

Re : Pilote nvidia

#170 17-09-2015 10:27:19

Re : Pilote nvidia

#171 17-09-2015 10:28:13

Re : Pilote nvidia

#172 17-09-2015 10:29:31

Re : Pilote nvidia

#173 17-09-2015 10:31:25

Re : Pilote nvidia

#174 17-09-2015 10:32:14

Re : Pilote nvidia

#175 17-09-2015 10:32:45

Re : Pilote nvidia

Pied de page des forums