quand je lance
dans un terminal voila le resultat:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8, product=0x08a5) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
apparemment il detecte mon scanner.Ensuite j'ai fais
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Edit - smolski
Mise en conformité les commandes et leurs retour entre leurs balises respectives.
Voir le tuto : Le code, ça pique moins les yeux en couleur
Ça doit pas être loin des 666 points choco df de paskal pour moi maintenant !
Dernière modification par lechtarbédeservice (05-12-2015 12:29:37)