Bonjour les amis
Je tente de faire fonctionner ma carte Wi-fi
Atheros QCA6174 mais en vain.
Retour de la commande
lspci -k | grep -i network -A 2
DeviceName: Realtek(R) Gigabit Network Connection
Subsystem: Acer Incorporated [ALI] Device 098d
00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07)
--
03:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
Subsystem: Lite-On Communications Inc Device 0807
Kernel driver in use: ath10k_pci
Après quel recherche j'ai installer le paquet firmware-atheros.
apt-get install firmware-atheros
et je redémarre ma bécane... Network manager semble reconnaît ma carte mais ne me montre pas les réseaux disponible, plus précisément il dit "périphérique non prêt".
Voici le retour de
[ 1.415494] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 1.415826] ath10k_pci 0000:03:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[ 1.606950] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/cal-pci-0000:03:00.0.bin (-2)
[ 1.606957] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 1.607508] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin (-2)
[ 1.607511] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin failed with error -2
[ 1.607515] ath10k_pci 0000:03:00.0: failed to load spec board file, falling back to generic: -2
[ 1.607843] ath10k_pci 0000:03:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board.bin
[ 1.607851] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/QCA6174/hw3.0/firmware-5.bin (-2)
[ 1.607854] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[ 1.607856] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[ 1.612575] ath10k_pci 0000:03:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-4.bin
[ 3.734299] ath10k_pci 0000:03:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff, 168c:003e:11ad:0807 fallback) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 htt 3.26 wmi 4 cal otp max_sta 32
[ 3.734315] ath10k_pci 0000:03:00.0: debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 3.817962] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 9.107950] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
[ 12.114062] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 17.420613] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
[ 20.426643] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 25.729119] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
[ 28.735121] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 34.045482] ath10k_pci 0000:03:00.0: failed to enable ani by default: -11
[ 37.051679] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 42.353992] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
[ 45.360001] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 50.662550] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
[ 53.668537] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 58.975290] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
[ 61.981096] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 67.283802] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
[ 70.289586] ath10k_pci 0000:03:00.0: could not suspend target (-11)
[ 75.592111] ath10k_pci 0000:03:00.0: failed to enable adaptive qcs: -11
...
Bon je retourne sur la toile et essaye plusieurs manipulation mais rien de fructueux... j'ai même peur d'avoir aggraver le problème.
J'ai aussi fait ça.
gedit /etc/modprobe.d/ath10k.conf
et rajouté cette ligne:
options ath10k_core skip_otp=y
Merci de votre aide.
EDIT: Voir solution à ce problème au poste #8
Dernière modification par Slyfox (29-12-2015 14:42:31)