logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 28-04-2016 10:10:13

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

{Resolu]Welcome to emergency mode !

J'ai fait une petite connerie avec mon RAID, je croyais que c'était réparé mais apparemment, ça a empiré:
le système ne démarre pas malgré que les disques encause ne sont là que pour du stockage neutral

opérations effectuées hier:https://debian-facile.org/viewtopic.php … 75#p176275

Le système passe en emergency mode et je ne peux pas aller plus loin, comment m'en sortir et pouvoir démarrer puis après comment fixer tout ça (en plus j'ai remarqué que ces derniers temps mon système est un peu ralenti, j'envisage presque de tout sauvegarder et de faire une reinstall, par contre c'est quelque chose que je n'ai jamais fait sur Linux (en tout cas jamais avec un système que j'utilise tous les jours))

Dans la console du démarrage (avec le fdisk qui vérifie et ce genre de bazar) (je crois que c'est un affichage de dmesg), il y a d'abord eu un

Failed to start Load Kernel Modules see systemd-modules-load.service for details


puis:

[   ***] a start job is running for dev-md0.device (x/1min30s)



et enfin j'ai (pas complet puisque je tape à la main)

[OK] Closed d bus system message bus socket
Closed CUPS printing service sockets
stopped system logging service
starting ipv6 recursing dns server discovery
....
Starting emergency shell
started emergency shell
started restore emergency mode
started rfestore soundcard state
started lsb
...
reached local network
reached target network is online
...
Welcome to emergency mode! After logging in type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, 'systemctl default" totry again to boot into default mode
Give root passeword for maintenance
(or type ctrl+d to continue)



Que faire ? J'ai essayé de reboot mais ça n'a pas marché, j'ai envie de mettre systemctl default mais j'ai un peu peur

Dernière modification par nazmi (03-05-2016 00:11:02)

Hors ligne

#2 28-04-2016 12:15:32

anonyme
Invité

Re : {Resolu]Welcome to emergency mode !

tu tape directement ton mot de passe , tu sera en console pure et tu pourra voir tes logs
aprés je laisse faire les barbus wink

#3 28-04-2016 14:44:18

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

ok je vais récuper tout ça et poster ici, je pense que je vais copier le bazar dans une clé USB et puis ça devrait aller smile

Hors ligne

#4 28-04-2016 17:08:08

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

J'ai récupéré dmesg et journalctl (-xb) mais c'est pas passé au départ (j'ai essayé d'ajouter une ligne à fstab puis mount) mais après j'ai pris une autre clé USB, et ça a été finalement, voila deux fichiers:

[    0.000000] Linux version 4.5.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.5.1-1~bpo8+1 (2016-04-20)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-0.bpo.1-amd64 root=UUID=33bfefd7-ab91-40a9-bec5-3acacf7f4ceb ro quiet
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf582fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf583000-0x00000000bf5cbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf5cc000-0x00000000bf5d3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf5d4000-0x00000000bf5f6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf5f7000-0x00000000bf5f8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf5f9000-0x00000000bf608fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf609000-0x00000000bf613fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf614000-0x00000000bf63bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf63c000-0x00000000bf67efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf67f000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MSI MS-7680/H61M-E33 (MS-7680), BIOS V10.2 02/18/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 13F800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcd50-0x000fcd5f] mapped at [ffff8800000fcd50]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01d4a000, 0x01d4afff] PGTABLE
[    0.000000] BRK [0x01d4b000, 0x01d4bfff] PGTABLE
[    0.000000] BRK [0x01d4c000, 0x01d4cfff] PGTABLE
[    0.000000] BRK [0x01d4d000, 0x01d4dfff] PGTABLE
[    0.000000] BRK [0x01d4e000, 0x01d4efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36062000-0x37028fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0430 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BF5CC068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BF5D3388 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BF5CC150 007238 (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BF60BF80 000040
[    0.000000] ACPI: APIC 0x00000000BF5D3480 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BF5D34F8 000102 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000BF5D3600 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BF5D3640 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
[    0.000000] ACPI: ASF! 0x00000000BF5D3678 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13f7f8000-0x13f7fcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf582fff]
[    0.000000]   node   0: [mem 0x00000000bf5f7000-0x00000000bf5f8fff]
[    0.000000]   node   0: [mem 0x00000000bf67f000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f7fffff]
[    0.000000] On node 0 totalpages: 1044131
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12189 pages used for memmap
[    0.000000]   DMA32 zone: 780038 pages, LIFO batch:31
[    0.000000]   Normal zone: 4064 pages used for memmap
[    0.000000]   Normal zone: 260096 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf583000-0xbf5cbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf5cc000-0xbf5d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf5d4000-0xbf5f6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf5f9000-0xbf608fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf609000-0xbf613fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf614000-0xbf63bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf63c000-0xbf67efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013f400000 s94296 r8192 d32680 u524288
[    0.000000] pcpu-alloc: s94296 r8192 d32680 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027793
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-0.bpo.1-amd64 root=UUID=33bfefd7-ab91-40a9-bec5-3acacf7f4ceb ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4014252K/4176524K available (5880K kernel code, 1169K rwdata, 2940K rodata, 1328K init, 832K bss, 162272K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3092.946 MHz processor
[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.89 BogoMIPS (lpj=12371784)
[    0.000028] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20160108
[    0.003241] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.003277] Security Framework initialized
[    0.003278] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.003284] AppArmor: AppArmor disabled by boot time parameter
[    0.003490] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004369] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004801] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004805] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005101] Disabling memory control group subsystem
[    0.005125] CPU: Physical Processor ID: 0
[    0.005126] CPU: Processor Core ID: 0
[    0.005130] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.005130] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.005132] mce: CPU supports 7 MCE banks
[    0.005141] CPU0: Thermal monitoring enabled (TM1)
[    0.005147] process: using mwait in idle threads
[    0.005150] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.005150] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.005449] Freeing SMP alternatives memory: 24K (ffffffff81c72000 - ffffffff81c78000)
[    0.231911] ftrace: allocating 24119 entries in 95 pages
[    0.240957] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.280646] TSC deadline timer enabled
[    0.280649] smpboot: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.280673] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.280689] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.280691] ... version:                3
[    0.280692] ... bit width:              48
[    0.280692] ... generic registers:      4
[    0.280693] ... value mask:             0000ffffffffffff
[    0.280694] ... max period:             0000ffffffffffff
[    0.280694] ... fixed-purpose events:   3
[    0.280695] ... event mask:             000000070000000f
[    0.281112] x86: Booting SMP configuration:
[    0.281113] .... node  #0, CPUs:      #1
[    0.283440] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.283520]  #2 #3
[    0.288125] x86: Booted up 1 node, 4 CPUs
[    0.288128] smpboot: Total of 4 processors activated (24743.56 BogoMIPS)
[    0.290657] devtmpfs: initialized
[    0.292532] PM: Registering ACPI NVS region [mem 0xbf583000-0xbf5cbfff] (299008 bytes)
[    0.292539] PM: Registering ACPI NVS region [mem 0xbf609000-0xbf613fff] (45056 bytes)
[    0.292541] PM: Registering ACPI NVS region [mem 0xbf63c000-0xbf67efff] (274432 bytes)
[    0.292610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.292658] pinctrl core: initialized pinctrl subsystem
[    0.292764] NET: Registered protocol family 16
[    0.302509] cpuidle: using governor ladder
[    0.311401] cpuidle: using governor menu
[    0.311440] ACPI: bus type PCI registered
[    0.311442] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.311502] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.311504] PCI: not using MMCONFIG
[    0.311505] PCI: Using configuration type 1 for base access
[    0.311663] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.322588] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.322796] ACPI: Added _OSI(Module Device)
[    0.322797] ACPI: Added _OSI(Processor Device)
[    0.322798] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.322799] ACPI: Added _OSI(Processor Aggregator Device)
[    0.323643] ACPI: Executed 1 blocks of module-level executable AML code
[    0.325521] ACPI: Dynamic OEM Table Load:
[    0.325525] ACPI: SSDT 0xFFFF880139D4F000 00038C (v01 AMI    IST      00000001 MSFT 03000001)
[    0.325764] ACPI: Dynamic OEM Table Load:
[    0.325766] ACPI: SSDT 0xFFFF880139E80DC0 000084 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.326289] ACPI: Interpreter enabled
[    0.326302] ACPI: (supports S0 S1 S3 S4 S5)
[    0.326303] ACPI: Using IOAPIC for interrupt routing
[    0.326325] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.326371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.326374] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.326640] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.326836] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.330716] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.330720] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.330827] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.330879] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.330880] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.330882] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.330883] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.331109] PCI host bridge to bus 0000:00
[    0.331111] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.331112] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.331114] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.331115] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.331116] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.331117] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.331118] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.331120] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.331126] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.331197] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.331222] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.331253] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.331311] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.331332] pci 0000:00:16.0: reg 0x10: [mem 0xfb107000-0xfb10700f 64bit]
[    0.331401] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.331473] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.331490] pci 0000:00:1a.0: reg 0x10: [mem 0xfb106000-0xfb1063ff]
[    0.331570] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.331604] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.331641] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.331657] pci 0000:00:1b.0: reg 0x10: [mem 0xfb100000-0xfb103fff 64bit]
[    0.331726] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.331792] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.331865] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.331902] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.331938] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[    0.332011] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.332047] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.332084] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.332156] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.332192] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.332231] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.332248] pci 0000:00:1d.0: reg 0x10: [mem 0xfb105000-0xfb1053ff]
[    0.332328] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.332361] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.332399] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.332554] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
[    0.332568] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.332575] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.332583] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.332590] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.332598] pci 0000:00:1f.2: reg 0x20: [io  0xf090-0xf09f]
[    0.332605] pci 0000:00:1f.2: reg 0x24: [io  0xf080-0xf08f]
[    0.332615] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.332616] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.332617] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.332618] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.332694] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.332708] pci 0000:00:1f.3: reg 0x10: [mem 0xfb104000-0xfb1040ff 64bit]
[    0.332728] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.332804] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.332816] pci 0000:00:1f.5: reg 0x10: [io  0xf070-0xf077]
[    0.332823] pci 0000:00:1f.5: reg 0x14: [io  0xf060-0xf063]
[    0.332831] pci 0000:00:1f.5: reg 0x18: [io  0xf050-0xf057]
[    0.332838] pci 0000:00:1f.5: reg 0x1c: [io  0xf040-0xf043]
[    0.332845] pci 0000:00:1f.5: reg 0x20: [io  0xf030-0xf03f]
[    0.332853] pci 0000:00:1f.5: reg 0x24: [io  0xf020-0xf02f]
[    0.332962] pci 0000:01:00.0: [10de:0de0] type 00 class 0x030000
[    0.332971] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.332980] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.332988] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
[    0.332993] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.332999] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    0.333068] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.333077] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[    0.342529] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.342531] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.342533] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.342536] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.342578] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.342652] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
[    0.342838] pci 0000:03:00.0: supports D1 D2
[    0.342839] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354533] pci 0000:00:1c.2: PCI bridge to [bus 03-04] (subtractive decode)
[    0.354544] pci 0000:00:1c.2:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.354545] pci 0000:00:1c.2:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.354546] pci 0000:00:1c.2:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.354547] pci 0000:00:1c.2:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.354549] pci 0000:00:1c.2:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.354550] pci 0000:00:1c.2:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.354551] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.354711] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.354807] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.354829] pci 0000:05:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.354863] pci 0000:05:00.0: reg 0x18: [mem 0xda104000-0xda104fff 64bit pref]
[    0.354884] pci 0000:05:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref]
[    0.354991] pci 0000:05:00.0: supports D1 D2
[    0.354993] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.366537] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.366541] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.366548] pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[    0.366983] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.367025] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.367064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.367103] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.367142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.367181] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.367221] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.367259] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.367306] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.367395] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.367396] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.367397] vgaarb: loaded
[    0.367398] vgaarb: bridge control possible 0000:01:00.0
[    0.367478] PCI: Using ACPI for IRQ routing
[    0.373598] PCI: pci_cache_line_size set to 64 bytes
[    0.373643] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.373644] e820: reserve RAM buffer [mem 0xbf583000-0xbfffffff]
[    0.373646] e820: reserve RAM buffer [mem 0xbf5f9000-0xbfffffff]
[    0.373647] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.373648] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
[    0.373769] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.373773] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.376798] clocksource: Switched to clocksource hpet
[    0.381531] VFS: Disk quotas dquot_6.6.0
[    0.381555] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.381682] pnp: PnP ACPI init
[    0.381804] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.381806] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.381807] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.381809] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.381810] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.381813] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.381911] system 00:01: [io  0x0a00-0x0a1f] has been reserved
[    0.381913] system 00:01: [io  0x0a30-0x0a3f] has been reserved
[    0.381915] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382095] pnp 00:02: [dma 0 disabled]
[    0.382134] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.382157] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.382199] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.382201] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382402] pnp 00:05: [dma 3]
[    0.382486] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.382630] system 00:06: [io  0x0400-0x0453] could not be reserved
[    0.382631] system 00:06: [io  0x0458-0x047f] has been reserved
[    0.382633] system 00:06: [io  0x1180-0x119f] has been reserved
[    0.382634] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.382636] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.382638] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.382640] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.382641] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.382643] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.382690] system 00:07: [io  0x0454-0x0457] has been reserved
[    0.382692] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.382848] pnp: PnP ACPI: found 8 devices
[    0.388989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.389036] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.389038] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.389041] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.389043] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.389045] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.389056] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.389079] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[    0.389089] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.389092] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.389099] pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[    0.389106] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.389107] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.389108] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.389109] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.389110] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.389112] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.389113] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.389114] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.389115] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.389117] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.389118] pci_bus 0000:03: resource 4 [io  0x0000-0x03af window]
[    0.389119] pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7 window]
[    0.389120] pci_bus 0000:03: resource 6 [io  0x03b0-0x03df window]
[    0.389122] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.389123] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.389124] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.389125] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.389127] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.389128] pci_bus 0000:05: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
[    0.389178] NET: Registered protocol family 2
[    0.389330] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.389403] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.389497] TCP: Hash tables configured (established 32768 bind 32768)
[    0.389518] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.389534] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.389596] NET: Registered protocol family 1
[    0.389827] pci 0000:01:00.0: Video device with shadowed ROM
[    0.389839] PCI: CLS 64 bytes, default 64
[    0.389877] Unpacking initramfs...
[    0.626405] Freeing initrd memory: 16156K (ffff880036062000 - ffff880037029000)
[    0.626439] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.626441] software IO TLB [mem 0xbb583000-0xbf583000] (64MB) mapped at [ffff8800bb583000-ffff8800bf582fff]
[    0.626489] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.626491] hw unit of domain pp0-core 2^-16 Joules
[    0.626491] hw unit of domain package 2^-16 Joules
[    0.626492] hw unit of domain pp1-gpu 2^-16 Joules
[    0.626834] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.626869] audit: initializing netlink subsys (disabled)
[    0.626887] audit: type=2000 audit(1461859236.404:1): initialized
[    0.627206] Initialise system trusted keyring
[    0.627319] zbud: loaded
[    0.627914] Key type asymmetric registered
[    0.627917] Asymmetric key parser 'x509' registered
[    0.627936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.627966] io scheduler noop registered
[    0.627969] io scheduler deadline registered
[    0.627984] io scheduler cfq registered (default)
[    0.628309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.628315] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.628331] intel_idle: MWAIT substates: 0x1120
[    0.628332] intel_idle: v0.4.1 model 0x2A
[    0.628333] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.628472] GHES: HEST is not enabled!
[    0.628536] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.649012] 00:02: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.649409] Linux agpgart interface v0.103
[    0.649463] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.649464] AMD IOMMUv2 functionality not available on this system
[    0.649859] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.650262] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.650267] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.650403] mousedev: PS/2 mouse device common for all mice
[    0.650437] rtc_cmos 00:03: RTC can wake from S4
[    0.650573] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.650600] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.650611] Intel P-state driver initializing.
[    0.650712] ledtrig-cpu: registered to indicate activity on CPUs
[    0.651704] NET: Registered protocol family 10
[    0.651946] mip6: Mobile IPv6
[    0.651950] NET: Registered protocol family 17
[    0.651956] mpls_gso: MPLS GSO support
[    0.652233] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
[    0.652248] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
[    0.652255] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
[    0.652263] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
[    0.652320] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.652541] registered taskstats version 1
[    0.652568] Loading compiled-in X.509 certificates
[    0.653040] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.653067] zswap: loaded using pool lzo/zbud
[    0.653600] rtc_cmos 00:03: setting system clock to 2016-04-28 16:00:37 UTC (1461859237)
[    0.653700] PM: Hibernation image not present or could not be loaded.
[    0.654926] Freeing unused kernel memory: 1328K (ffffffff81b26000 - ffffffff81c72000)
[    0.654928] Write protecting the kernel read-only data: 10240k
[    0.655186] Freeing unused kernel memory: 252K (ffff8800015c1000 - ffff880001600000)
[    0.659126] Freeing unused kernel memory: 1156K (ffff8800018df000 - ffff880001a00000)
[    0.668993] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.681339] systemd-udevd[77]: starting version 215
[    0.681686] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.688052] fjes: module verification failed: signature and/or required key missing - tainting kernel
[    0.688357] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.696424] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.696435] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.696956] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc900008a0000, 6c:62:6d:38:d1:62, XID 0c200000 IRQ 25
[    0.696962] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.697139] ACPI: bus type USB registered
[    0.697177] usbcore: registered new interface driver usbfs
[    0.697195] usbcore: registered new interface driver hub
[    0.697221] usbcore: registered new device driver usb
[    0.697890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.698338] ehci-pci: EHCI PCI platform driver
[    0.698489] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.698491] SCSI subsystem initialized
[    0.698501] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.698521] ehci-pci 0000:00:1a.0: debug port 2
[    0.700870] libata version 3.00 loaded.
[    0.702429] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.702464] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb106000
[    0.712829] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.712895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.712897] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.712899] usb usb1: Product: EHCI Host Controller
[    0.712901] usb usb1: Manufacturer: Linux 4.5.0-0.bpo.1-amd64 ehci_hcd
[    0.712902] usb usb1: SerialNumber: 0000:00:1a.0
[    0.713126] hub 1-0:1.0: USB hub found
[    0.713133] hub 1-0:1.0: 2 ports detected
[    0.713355] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.713361] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.713376] ehci-pci 0000:00:1d.0: debug port 2
[    0.717287] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.717304] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb105000
[    0.728884] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.728942] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.728945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728947] usb usb2: Product: EHCI Host Controller
[    0.728948] usb usb2: Manufacturer: Linux 4.5.0-0.bpo.1-amd64 ehci_hcd
[    0.728950] usb usb2: SerialNumber: 0000:00:1d.0
[    0.729213] hub 2-0:1.0: USB hub found
[    0.729222] hub 2-0:1.0: 2 ports detected
[    0.729412] ata_piix 0000:00:1f.2: version 2.13
[    0.729511] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.886524] scsi host0: ata_piix
[    0.886786] scsi host1: ata_piix
[    0.886885] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf090 irq 14
[    0.886893] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15
[    0.887015] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.888474] scsi host2: ata_piix
[    0.888710] scsi host3: ata_piix
[    0.888792] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[    0.888796] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[    1.024871] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.040868] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.157323] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.157328] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.157712] hub 1-1:1.0: USB hub found
[    1.157763] hub 1-1:1.0: 4 ports detected
[    1.173654] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.173659] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.174106] hub 2-1:1.0: USB hub found
[    1.174308] hub 2-1:1.0: 6 ports detected
[    1.352883] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.353045] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.355593] ata4.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[    1.355597] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.358538] ata4.00: configured for UDMA/133
[    1.369277] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[    1.369281] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.385293] ata3.00: configured for UDMA/133
[    1.428875] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.444863] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[    1.523344] usb 1-1.2: New USB device found, idVendor=04b3, idProduct=310d
[    1.523349] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.525248] hidraw: raw HID events driver (C) Jiri Kosina
[    1.527778] usbcore: registered new interface driver usbhid
[    1.527781] usbhid: USB HID core driver
[    1.528496] input: HID 04b3:310d as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04B3:310D.0001/input/input3
[    1.528635] hid-generic 0003:04B3:310D.0001: input,hidraw0: USB HID v1.11 Mouse [HID 04b3:310d] on usb-0000:00:1a.0-1.2/input0
[    1.545392] usb 2-1.5: New USB device found, idVendor=0518, idProduct=0001
[    1.545396] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.545399] usb 2-1.5: Product: USB-compliant keyboard
[    1.545401] usb 2-1.5: Manufacturer: Plus More Enterprise LTD.
[    1.548947] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:0518:0001.0002/input/input4
[    1.605076] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.5/input0
[    1.608689] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:0518:0001.0003/input/input5
[    1.624861] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[    1.624866] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
[    1.661028] hid-generic 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.5/input1
[    2.216874] ata2.01: failed to resume link (SControl 0)
[    2.216964] ata1.01: failed to resume link (SControl 0)
[    2.372943] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.372959] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.373121] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.373136] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.403200] ata1.00: ATA-8: MAXTOR STM3160813AS, MC1H, max UDMA/133
[    2.403205] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.420165] ata2.00: ATA-7: ST3320820AS, 3.AAD, max UDMA/133
[    2.420169] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.450959] ata1.00: configured for UDMA/133
[    2.451432] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM316081 MC1H PQ: 0 ANSI: 5
[    2.486794] ata2.00: configured for UDMA/133
[    2.487176] scsi 1:0:0:0: Direct-Access     ATA      ST3320820AS      D    PQ: 0 ANSI: 5
[    2.509422] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[    2.533263] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 0C06 PQ: 0 ANSI: 5
[    2.534229] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.534237] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.534254] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.534317] sd 1:0:0:0: [sdb] Write Protect is off
[    2.534318] sd 0:0:0:0: [sda] Write Protect is off
[    2.534321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.534325] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.534346] sd 2:0:0:0: [sdc] Write Protect is off
[    2.534352] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.534360] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.534361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'
t support DPO or FUA
[    2.534392] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.551351]  sdb: sdb1
[    2.551795] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.555030]  sdc: sdc1
[    2.555408] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.573268] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.573378] sd 3:0:0:0: [sdd] Write Protect is off
[    2.573383] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.573428] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn'
t support DPO or FUA
[    2.573902] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.573982] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.574049] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.574099] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    2.574609]  sda: sda1 sda2 < sda5 >
[    2.575059] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.582381]  sdd: sdd1
[    2.582783] sd 3:0:0:0: [sdd] Attached SCSI disk
[    2.624932] clocksource: Switched to clocksource tsc
[    2.879885] PM: Starting manual resume from disk
[    2.879892] PM: Hibernation image partition 8:5 present
[    2.879894] PM: Looking for hibernation image.
[    2.899546] PM: Image not found (code -22)
[    2.899549] PM: Hibernation image not present or could not be loaded.
[    3.264629] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.406231] random: nonblocking pool is initialized
[    6.960723] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.566760] lp: driver loaded but no devices found
[    7.578799] ppdev: user-space parallel port driver
[    7.618679] parport_pc 00:05: reported by Plug and Play ACPI
[    7.618763] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    7.713045] lp0: using parport0 (interrupt-driven).
[    7.973344] fuse init (API version 7.24)
[    8.247829] f71882fg: Found f71869a chip at 0x290, revision 32
[    8.247859] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000290-0x000000000000029F (\_SB.PCI0.SBRG.SIO1.RNTR) (20160108/utaddress-255)
[    8.247868] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.928709] systemd-udevd[210]: starting version 215
[   10.662628] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.274407] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[   11.274413] ACPI: Power Button [PWRB]
[   11.274480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   11.274483] ACPI: Power Button [PWRF]
[   11.464833] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.603821] [drm] Initialized drm 1.1.0 20060810
[   11.813905] wmi: Mapper loaded
[   11.903558] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   12.546332] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   12.554393] f71882fg: Found f71869a chip at 0x290, revision 32
[   12.554420] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000290-0x000000000000029F (\_SB.PCI0.SBRG.SIO1.RNTR) (20160108/utaddress-255)
[   12.554426] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.735323] Adding 6369276k swap on /dev/sda5.  Priority:-1 extents:1 across:6369276k FS
[   12.756820] snd_hda_intel 0000:01:00.1: Disabling MSI
[   12.756828] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   12.777814] iTCO_vendor_support: vendor-support=0
[   12.782879] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.782919] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   12.783061] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.823225] nouveau 0000:01:00.0: NVIDIA GF108 (0c1000a1)
[   12.854242] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   12.854247] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.854250] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.854252] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.854255] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   12.854257] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.854260] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   12.854263] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   12.854266] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   12.873768] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.873860] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.873964] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.874058] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.874148] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   12.874240] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   12.874329] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   12.874787] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   12.909458] kvm: disabled by bios
[   12.955066] nouveau 0000:01:00.0: bios: version 70.08.29.00.01
[   12.955726] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[   13.009628] kvm: disabled by bios
[   13.074124] kvm: disabled by bios
[   13.204675] intel_rapl: Found RAPL domain package
[   13.204679] intel_rapl: Found RAPL domain core
[   13.204681] intel_rapl: Found RAPL domain uncore
[   13.689653] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   13.689768] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   13.689875] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   13.689984] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   14.253143] [TTM] Zone  kernel: Available graphics memory: 2016584 kiB
[   14.253145] [TTM] Initializing pool allocator
[   14.253150] [TTM] Initializing DMA pool allocator
[   14.253161] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[   14.253163] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   14.253166] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   14.253167] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   14.253169] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[   14.253170] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[   14.253172] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011392 00020020
[   14.253173] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000
[   14.253174] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[   14.253175] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[   14.253177] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[   14.255182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.255184] [drm] Driver supports precise vblank timestamp query.
[   14.300065] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[   14.398585] nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x60000, bo ffff880139b45000
[   14.398693] fbcon: nouveaufb (fb0) is primary device
[   14.471541] Console: switching to colour frame buffer device 170x48
[   14.472810] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   14.480925] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[   97.247150] systemd-journald[202]: Received request to flush runtime journal from PID 1
[   98.973957] RPC: Registered named UNIX socket transport module.
[   98.973962] RPC: Registered udp transport module.
[   98.973965] RPC: Registered tcp transport module.
[   98.973967] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   99.020108] FS-Cache: Loaded
[   99.083252] FS-Cache: Netfs 'nfs' registered for caching
[   99.178841] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  116.629869] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[  116.949870] usb 2-1.6: new high-speed USB device number 5 using ehci-pci
[  117.047573] usb 2-1.6: New USB device found, idVendor=0930, idProduct=6545
[  117.047578] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  117.047581] usb 2-1.6: Product: TransMemory
[  117.047583] usb 2-1.6: Manufacturer: TOSHIBA
[  117.047594] usb 2-1.6: SerialNumber: 001CC0C60D71E831F320005B
[  117.115329] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[  117.115450] scsi host4: usb-storage 2-1.6:1.0
[  117.115601] usbcore: registered new interface driver usb-storage
[  117.133868] usbcore: registered new interface driver uas
[  118.190970] scsi 4:0:0:0: Direct-Access     TOSHIBA  TransMemory      PMAP PQ: 0 ANSI: 0 CCS
[  118.191464] sd 4:0:0:0: Attached scsi generic sg4 type 0
[  119.359691] sd 4:0:0:0: [sde] 15240576 512-byte logical blocks: (7.80 GB/7.27 GiB)
[  119.360482] sd 4:0:0:0: [sde] Write Protect is off
[  119.360488] sd 4:0:0:0: [sde] Mode Sense: 23 00 00 00
[  119.361132] sd 4:0:0:0: [sde] No Caching mode page found
[  119.361342] sd 4:0:0:0: [sde] Assuming drive cache: write through
[  119.385292]  sde: sde1
[  119.388296] sd 4:0:0:0: [sde] Attached SCSI removable disk



dmesg

-- Logs begin at jeu. 2016-04-28 18:00:45 CEST, end at jeu. 2016-04-28 18:03:56 CEST. --
avril 28 18:00:45 derpian systemd-journal[202]: Runtime journal is using 8.0M (max allowed 78.7M, trying to leave 118.1M free of 779.4M available → current limit 78.7M).
avril 28 18:00:45 derpian systemd-journal[202]: Runtime journal is using 8.0M (max allowed 78.7M, trying to leave 118.1M free of 779.4M available → current limit 78.7M).
avril 28 18:00:45 derpian kernel: Linux version 4.5.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.5.1-1~bpo8+1 (2016-04-20)
avril 28 18:00:45 derpian kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-0.bpo.1-amd64 root=UUID=33bfefd7-ab91-40a9-bec5-3acacf7f4ceb ro quiet
avril 28 18:00:45 derpian kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
avril 28 18:00:45 derpian kernel: x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
avril 28 18:00:45 derpian kernel: x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
avril 28 18:00:45 derpian kernel: x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
avril 28 18:00:45 derpian kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
avril 28 18:00:45 derpian kernel: x86/fpu: Using 'eager' FPU context switches.
avril 28 18:00:45 derpian kernel: e820: BIOS-provided physical RAM map:
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bf582fff] usable
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf583000-0x00000000bf5cbfff] ACPI NVS
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf5cc000-0x00000000bf5d3fff] ACPI data
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf5d4000-0x00000000bf5f6fff] reserved
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf5f7000-0x00000000bf5f8fff] usable
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf5f9000-0x00000000bf608fff] reserved
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf609000-0x00000000bf613fff] ACPI NVS
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf614000-0x00000000bf63bfff] reserved
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf63c000-0x00000000bf67efff] ACPI NVS
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000bf67f000-0x00000000bf7fffff] usable
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
avril 28 18:00:45 derpian kernel: BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
avril 28 18:00:45 derpian kernel: NX (Execute Disable) protection: active
avril 28 18:00:45 derpian kernel: SMBIOS 2.7 present.
avril 28 18:00:45 derpian kernel: DMI: MSI MS-7680/H61M-E33 (MS-7680), BIOS V10.2 02/18/2011
avril 28 18:00:45 derpian kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
avril 28 18:00:45 derpian kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
avril 28 18:00:45 derpian kernel: e820: last_pfn = 0x13f800 max_arch_pfn = 0x400000000
avril 28 18:00:45 derpian kernel: MTRR default type: uncachable
avril 28 18:00:45 derpian kernel: MTRR fixed ranges enabled:
avril 28 18:00:45 derpian kernel:   00000-9FFFF write-back
avril 28 18:00:45 derpian kernel:   A0000-BFFFF uncachable
avril 28 18:00:45 derpian kernel:   C0000-CFFFF write-protect
avril 28 18:00:45 derpian kernel:   D0000-E7FFF uncachable
avril 28 18:00:45 derpian kernel:   E8000-FFFFF write-protect
avril 28 18:00:45 derpian kernel: MTRR variable ranges enabled:
avril 28 18:00:45 derpian kernel:   0 base 000000000 mask F00000000 write-back
avril 28 18:00:45 derpian kernel:   1 base 100000000 mask FC0000000 write-back
avril 28 18:00:45 derpian kernel:   2 base 0C0000000 mask FC0000000 uncachable
avril 28 18:00:45 derpian kernel:   3 base 13F800000 mask FFF800000 uncachable
avril 28 18:00:45 derpian kernel:   4 disabled
avril 28 18:00:45 derpian kernel:   5 disabled
avril 28 18:00:45 derpian kernel:   6 disabled
avril 28 18:00:45 derpian kernel:   7 disabled
avril 28 18:00:45 derpian kernel:   8 disabled
avril 28 18:00:45 derpian kernel:   9 disabled
avril 28 18:00:45 derpian kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
avril 28 18:00:45 derpian kernel: e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
avril 28 18:00:45 derpian kernel: e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
avril 28 18:00:45 derpian kernel: found SMP MP-table at [mem 0x000fcd50-0x000fcd5f] mapped at [ffff8800000fcd50]
avril 28 18:00:45 derpian kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
avril 28 18:00:45 derpian kernel: BRK [0x01d4a000, 0x01d4afff] PGTABLE
avril 28 18:00:45 derpian kernel: BRK [0x01d4b000, 0x01d4bfff] PGTABLE
avril 28 18:00:45 derpian kernel: BRK [0x01d4c000, 0x01d4cfff] PGTABLE
avril 28 18:00:45 derpian kernel: BRK [0x01d4d000, 0x01d4dfff] PGTABLE
avril 28 18:00:45 derpian kernel: BRK [0x01d4e000, 0x01d4efff] PGTABLE
avril 28 18:00:45 derpian kernel: RAMDISK: [mem 0x36062000-0x37028fff]
avril 28 18:00:45 derpian kernel: ACPI: Early table checksum verification disabled
avril 28 18:00:45 derpian kernel: ACPI: RSDP 0x00000000000F0430 000024 (v02 ALASKA)
avril 28 18:00:45 derpian kernel: ACPI: XSDT 0x00000000BF5CC068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
avril 28 18:00:45 derpian kernel: ACPI: FACP 0x00000000BF5D3388 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
avril 28 18:00:45 derpian kernel: ACPI: DSDT 0x00000000BF5CC150 007238 (v02 ALASKA A M I    00000015 INTL 20051117)
avril 28 18:00:45 derpian kernel: ACPI: FACS 0x00000000BF60BF80 000040
avril 28 18:00:45 derpian kernel: ACPI: APIC 0x00000000BF5D3480 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
avril 28 18:00:45 derpian kernel: ACPI: SSDT 0x00000000BF5D34F8 000102 (v01 AMICPU PROC     00000001 MSFT 03000001)
avril 28 18:00:45 derpian kernel: ACPI: MCFG 0x00000000BF5D3600 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
avril 28 18:00:45 derpian kernel: ACPI: HPET 0x00000000BF5D3640 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
avril 28 18:00:45 derpian kernel: ACPI: ASF! 0x00000000BF5D3678 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
avril 28 18:00:45 derpian kernel: ACPI: Local APIC address 0xfee00000
avril 28 18:00:45 derpian kernel: No NUMA configuration found
avril 28 18:00:45 derpian kernel: Faking a node at [mem 0x0000000000000000-0x000000013f7fffff]
avril 28 18:00:45 derpian kernel: NODE_DATA(0) allocated [mem 0x13f7f8000-0x13f7fcfff]
avril 28 18:00:45 derpian kernel: Zone ranges:
avril 28 18:00:45 derpian kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
avril 28 18:00:45 derpian kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
avril 28 18:00:45 derpian kernel:   Normal   [mem 0x0000000100000000-0x000000013f7fffff]
avril 28 18:00:45 derpian kernel:   Device   empty
avril 28 18:00:45 derpian kernel: Movable zone start for each node
avril 28 18:00:45 derpian kernel: Early memory node ranges
avril 28 18:00:45 derpian kernel:   node   0: [mem 0x0000000000001000-0x000000000009dfff]
avril 28 18:00:45 derpian kernel:   node   0: [mem 0x0000000000100000-0x00000000bf582fff]
avril 28 18:00:45 derpian kernel:   node   0: [mem 0x00000000bf5f7000-0x00000000bf5f8fff]
avril 28 18:00:45 derpian kernel:   node   0: [mem 0x00000000bf67f000-0x00000000bf7fffff]
avril 28 18:00:45 derpian kernel:   node   0: [mem 0x0000000100000000-0x000000013f7fffff]
avril 28 18:00:45 derpian kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000013f7fffff]
avril 28 18:00:45 derpian kernel: On node 0 totalpages: 1044131
avril 28 18:00:45 derpian kernel:   DMA zone: 64 pages used for memmap
avril 28 18:00:45 derpian kernel:   DMA zone: 21 pages reserved
avril 28 18:00:45 derpian kernel:   DMA zone: 3997 pages, LIFO batch:0
avril 28 18:00:45 derpian kernel:   DMA32 zone: 12189 pages used for memmap
avril 28 18:00:45 derpian kernel:   DMA32 zone: 780038 pages, LIFO batch:31
avril 28 18:00:45 derpian kernel:   Normal zone: 4064 pages used for memmap
avril 28 18:00:45 derpian kernel:   Normal zone: 260096 pages, LIFO batch:31
avril 28 18:00:45 derpian kernel: ACPI: PM-Timer IO Port: 0x408
avril 28 18:00:45 derpian kernel: ACPI: Local APIC address 0xfee00000
avril 28 18:00:45 derpian kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
avril 28 18:00:45 derpian kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
avril 28 18:00:45 derpian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
avril 28 18:00:45 derpian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
avril 28 18:00:45 derpian kernel: ACPI: IRQ0 used by override.
avril 28 18:00:45 derpian kernel: ACPI: IRQ9 used by override.
avril 28 18:00:45 derpian kernel: Using ACPI (MADT) for SMP configuration information
avril 28 18:00:45 derpian kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
avril 28 18:00:45 derpian kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf583000-0xbf5cbfff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf5cc000-0xbf5d3fff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf5d4000-0xbf5f6fff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf5f9000-0xbf608fff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf609000-0xbf613fff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf614000-0xbf63bfff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf63c000-0xbf67efff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
avril 28 18:00:45 derpian kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
avril 28 18:00:45 derpian kernel: e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
avril 28 18:00:45 derpian kernel: Booting paravirtualized kernel on bare hardware
avril 28 18:00:45 derpian kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
avril 28 18:00:45 derpian kernel: setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
avril 28 18:00:45 derpian kernel: PERCPU: Embedded 33 pages/cpu @ffff88013f400000 s94296 r8192 d32680 u524288
avril 28 18:00:45 derpian kernel: pcpu-alloc: s94296 r8192 d32680 u524288 alloc=1*2097152
avril 28 18:00:45 derpian kernel: pcpu-alloc: [0] 0 1 2 3
avril 28 18:00:45 derpian kernel: Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027793
avril 28 18:00:45 derpian kernel: Policy zone: Normal
avril 28 18:00:45 derpian kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-0.bpo.1-amd64 root=UUID=33bfefd7-ab91-40a9-bec5-3acacf7f4ceb ro quiet
avril 28 18:00:45 derpian kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
avril 28 18:00:45 derpian kernel: Calgary: detecting Calgary via BIOS EBDA area
avril 28 18:00:45 derpian kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
avril 28 18:00:45 derpian kernel: Memory: 4014252K/4176524K available (5880K kernel code, 1169K rwdata, 2940K rodata, 1328K init, 832K bss, 162272K reserved, 0K cma-reserved)
avril 28 18:00:45 derpian kernel: Hierarchical RCU implementation.
avril 28 18:00:45 derpian kernel:         Build-time adjustment of leaf fanout to 64.
avril 28 18:00:45 derpian kernel:         RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
avril 28 18:00:45 derpian kernel: RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
avril 28 18:00:45 derpian kernel: NR_IRQS:33024 nr_irqs:456 16
avril 28 18:00:45 derpian kernel: Console: colour VGA+ 80x25
avril 28 18:00:45 derpian kernel: console [tty0] enabled
avril 28 18:00:45 derpian kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
avril 28 18:00:45 derpian kernel: hpet clockevent registered
avril 28 18:00:45 derpian kernel: tsc: Fast TSC calibration using PIT
avril 28 18:00:45 derpian kernel: tsc: Detected 3092.946 MHz processor
avril 28 18:00:45 derpian kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.89 BogoMIPS (lpj=12371784)
avril 28 18:00:45 derpian kernel: pid_max: default: 32768 minimum: 301
avril 28 18:00:45 derpian kernel: ACPI: Core revision 20160108
avril 28 18:00:45 derpian kernel: ACPI: 2 ACPI AML tables successfully acquired and loaded
avril 28 18:00:45 derpian kernel:
avril 28 18:00:45 derpian kernel: Security Framework initialized
avril 28 18:00:45 derpian kernel: Yama: disabled by default; enable with sysctl kernel.yama.*
avril 28 18:00:45 derpian kernel: AppArmor: AppArmor disabled by boot time parameter
avril 28 18:00:45 derpian kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
avril 28 18:00:45 derpian kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
avril 28 18:00:45 derpian kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
avril 28 18:00:45 derpian kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
avril 28 18:00:45 derpian kernel: Disabling memory control group subsystem
avril 28 18:00:45 derpian kernel: CPU: Physical Processor ID: 0
avril 28 18:00:45 derpian kernel: CPU: Processor Core ID: 0
avril 28 18:00:45 derpian kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
avril 28 18:00:45 derpian kernel: ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
avril 28 18:00:45 derpian kernel: mce: CPU supports 7 MCE banks
avril 28 18:00:45 derpian kernel: CPU0: Thermal monitoring enabled (TM1)
avril 28 18:00:45 derpian kernel: process: using mwait in idle threads
avril 28 18:00:45 derpian kernel: Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
avril 28 18:00:45 derpian kernel: Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
avril 28 18:00:45 derpian kernel: Freeing SMP alternatives memory: 24K (ffffffff81c72000 - ffffffff81c78000)
avril 28 18:00:45 derpian kernel: ftrace: allocating 24119 entries in 95 pages
avril 28 18:00:45 derpian kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
avril 28 18:00:45 derpian kernel: TSC deadline timer enabled
avril 28 18:00:45 derpian kernel: smpboot: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
avril 28 18:00:45 derpian kernel: Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
avril 28 18:00:45 derpian kernel: perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
avril 28 18:00:45 derpian kernel: ... version:                3
avril 28 18:00:45 derpian kernel: ... bit width:              48
avril 28 18:00:45 derpian kernel: ... generic registers:      4
avril 28 18:00:45 derpian kernel: ... value mask:             0000ffffffffffff
avril 28 18:00:45 derpian kernel: ... max period:             0000ffffffffffff
avril 28 18:00:45 derpian kernel: ... fixed-purpose events:   3
avril 28 18:00:45 derpian kernel: ... event mask:             000000070000000f
avril 28 18:00:45 derpian kernel: x86: Booting SMP configuration:
avril 28 18:00:45 derpian kernel: .... node  #0, CPUs:      #1
avril 28 18:00:45 derpian kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
avril 28 18:00:45 derpian kernel:  #2 #3
avril 28 18:00:45 derpian kernel: x86: Booted up 1 node, 4 CPUs
avril 28 18:00:45 derpian kernel: smpboot: Total of 4 processors activated (24743.56 BogoMIPS)
avril 28 18:00:45 derpian kernel: devtmpfs: initialized
avril 28 18:00:45 derpian kernel: PM: Registering ACPI NVS region [mem 0xbf583000-0xbf5cbfff] (299008 bytes)
avril 28 18:00:45 derpian kernel: PM: Registering ACPI NVS region [mem 0xbf609000-0xbf613fff] (45056 bytes)
avril 28 18:00:45 derpian kernel: PM: Registering ACPI NVS region [mem 0xbf63c000-0xbf67efff] (274432 bytes)
avril 28 18:00:45 derpian kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
avril 28 18:00:45 derpian kernel: pinctrl core: initialized pinctrl subsystem
avril 28 18:00:45 derpian kernel: NET: Registered protocol family 16
avril 28 18:00:45 derpian kernel: cpuidle: using governor ladder
avril 28 18:00:45 derpian kernel: cpuidle: using governor menu
avril 28 18:00:45 derpian kernel: ACPI: bus type PCI registered
avril 28 18:00:45 derpian kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
avril 28 18:00:45 derpian kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
avril 28 18:00:45 derpian kernel: PCI: not using MMCONFIG
avril 28 18:00:45 derpian kernel: PCI: Using configuration type 1 for base access
avril 28 18:00:45 derpian kernel: perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
avril 28 18:00:45 derpian kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
avril 28 18:00:45 derpian kernel: ACPI: Added _OSI(Module Device)
avril 28 18:00:45 derpian kernel: ACPI: Added _OSI(Processor Device)
avril 28 18:00:45 derpian kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
avril 28 18:00:45 derpian kernel: ACPI: Added _OSI(Processor Aggregator Device)
avril 28 18:00:45 derpian kernel: ACPI: Executed 1 blocks of module-level executable AML code
avril 28 18:00:45 derpian kernel: ACPI: Dynamic OEM Table Load:
avril 28 18:00:45 derpian kernel: ACPI: SSDT 0xFFFF880139D4F000 00038C (v01 AMI    IST      00000001 MSFT 03000001)
avril 28 18:00:45 derpian kernel: ACPI: Dynamic OEM Table Load:
avril 28 18:00:45 derpian kernel: ACPI: SSDT 0xFFFF880139E80DC0 000084 (v01 AMI    CST      00000001 MSFT 03000001)
avril 28 18:00:45 derpian kernel: ACPI: Interpreter enabled
avril 28 18:00:45 derpian kernel: ACPI: (supports S0 S1 S3 S4 S5)
avril 28 18:00:45 derpian kernel: ACPI: Using IOAPIC for interrupt routing
avril 28 18:00:45 derpian kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
avril 28 18:00:45 derpian kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
avril 28 18:00:45 derpian kernel: pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
avril 28 18:00:45 derpian kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
avril 28 18:00:45 derpian kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
avril 28 18:00:45 derpian kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
avril 28 18:00:45 derpian kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
avril 28 18:00:45 derpian kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
avril 28 18:00:45 derpian kernel: acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
avril 28 18:00:45 derpian kernel: acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
avril 28 18:00:45 derpian kernel: acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
avril 28 18:00:45 derpian kernel: acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
avril 28 18:00:45 derpian kernel: PCI host bridge to bus 0000:00
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
avril 28 18:00:45 derpian kernel: pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
avril 28 18:00:45 derpian kernel: pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
avril 28 18:00:45 derpian kernel: pci 0000:00:16.0: reg 0x10: [mem 0xfb107000-0xfb10700f 64bit]
avril 28 18:00:45 derpian kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
avril 28 18:00:45 derpian kernel: pci 0000:00:1a.0: reg 0x10: [mem 0xfb106000-0xfb1063ff]
avril 28 18:00:45 derpian kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
avril 28 18:00:45 derpian kernel: pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
avril 28 18:00:45 derpian kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfb100000-0xfb103fff 64bit]
avril 28 18:00:45 derpian kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4: System wakeup disabled by ACPI
avril 28 18:00:45 derpian kernel: pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
avril 28 18:00:45 derpian kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xfb105000-0xfb1053ff]
avril 28 18:00:45 derpian kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: reg 0x20: [io  0xf090-0xf09f]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: reg 0x24: [io  0xf080-0xf08f]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xfb104000-0xfb1040ff 64bit]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.5: reg 0x10: [io  0xf070-0xf077]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.5: reg 0x14: [io  0xf060-0xf063]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.5: reg 0x18: [io  0xf050-0xf057]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.5: reg 0x1c: [io  0xf040-0xf043]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.5: reg 0x20: [io  0xf030-0xf03f]
avril 28 18:00:45 derpian kernel: pci 0000:00:1f.5: reg 0x24: [io  0xf020-0xf02f]
avril 28 18:00:45 derpian kernel: pci 0000:01:00.0: [10de:0de0] type 00 class 0x030000
avril 28 18:00:45 derpian kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
avril 28 18:00:45 derpian kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
avril 28 18:00:45 derpian kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
avril 28 18:00:45 derpian kernel: pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
avril 28 18:00:45 derpian kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
avril 28 18:00:45 derpian kernel: pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
avril 28 18:00:45 derpian kernel: pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
avril 28 18:00:45 derpian kernel: pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
avril 28 18:00:45 derpian kernel: pci 0000:03:00.0: supports D1 D2
avril 28 18:00:45 derpian kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2: PCI bridge to [bus 03-04] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2:   bridge window [io  0x0000-0x03af window] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
avril 28 18:00:45 derpian kernel: pci 0000:03:00.0: PCI bridge to [bus 04]
avril 28 18:00:45 derpian kernel: pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
avril 28 18:00:45 derpian kernel: pci 0000:05:00.0: reg 0x10: [io  0xd000-0xd0ff]
avril 28 18:00:45 derpian kernel: pci 0000:05:00.0: reg 0x18: [mem 0xda104000-0xda104fff 64bit pref]
avril 28 18:00:45 derpian kernel: pci 0000:05:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref]
avril 28 18:00:45 derpian kernel: pci 0000:05:00.0: supports D1 D2
avril 28 18:00:45 derpian kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4: PCI bridge to [bus 05]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
avril 28 18:00:45 derpian kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
avril 28 18:00:45 derpian kernel: ACPI: Enabled 3 GPEs in block 00 to 3F
avril 28 18:00:45 derpian kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
avril 28 18:00:45 derpian kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
avril 28 18:00:45 derpian kernel: vgaarb: loaded
avril 28 18:00:45 derpian kernel: vgaarb: bridge control possible 0000:01:00.0
avril 28 18:00:45 derpian kernel: PCI: Using ACPI for IRQ routing
avril 28 18:00:45 derpian kernel: PCI: pci_cache_line_size set to 64 bytes
avril 28 18:00:45 derpian kernel: e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
avril 28 18:00:45 derpian kernel: e820: reserve RAM buffer [mem 0xbf583000-0xbfffffff]
avril 28 18:00:45 derpian kernel: e820: reserve RAM buffer [mem 0xbf5f9000-0xbfffffff]
avril 28 18:00:45 derpian kernel: e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
avril 28 18:00:45 derpian kernel: e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
avril 28 18:00:45 derpian kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
avril 28 18:00:45 derpian kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
avril 28 18:00:45 derpian kernel: clocksource: Switched to clocksource hpet
avril 28 18:00:45 derpian kernel: VFS: Disk quotas dquot_6.6.0
avril 28 18:00:45 derpian kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
avril 28 18:00:45 derpian kernel: pnp: PnP ACPI init
avril 28 18:00:45 derpian kernel: system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
avril 28 18:00:45 derpian kernel: system 00:01: [io  0x0a00-0x0a1f] has been reserved
avril 28 18:00:45 derpian kernel: system 00:01: [io  0x0a30-0x0a3f] has been reserved
avril 28 18:00:45 derpian kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
avril 28 18:00:45 derpian kernel: pnp 00:02: [dma 0 disabled]
avril 28 18:00:45 derpian kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
avril 28 18:00:45 derpian kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
avril 28 18:00:45 derpian kernel: system 00:04: [io  0x04d0-0x04d1] has been reserved
avril 28 18:00:45 derpian kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
avril 28 18:00:45 derpian kernel: pnp 00:05: [dma 3]
avril 28 18:00:45 derpian kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
avril 28 18:00:45 derpian kernel: system 00:06: [io  0x0400-0x0453] could not be reserved
avril 28 18:00:45 derpian kernel: system 00:06: [io  0x0458-0x047f] has been reserved
avril 28 18:00:45 derpian kernel: system 00:06: [io  0x1180-0x119f] has been reserved
avril 28 18:00:45 derpian kernel: system 00:06: [io  0x0500-0x057f] has been reserved
avril 28 18:00:45 derpian kernel: system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
avril 28 18:00:45 derpian kernel: system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:06: [mem 0xff000000-0xffffffff] has been reserved
avril 28 18:00:45 derpian kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
avril 28 18:00:45 derpian kernel: system 00:07: [io  0x0454-0x0457] has been reserved
avril 28 18:00:45 derpian kernel: system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
avril 28 18:00:45 derpian kernel: pnp: PnP ACPI: found 8 devices
avril 28 18:00:45 derpian kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
avril 28 18:00:45 derpian kernel: pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
avril 28 18:00:45 derpian kernel: pci 0000:03:00.0: PCI bridge to [bus 04]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.2: PCI bridge to [bus 03-04]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4: PCI bridge to [bus 05]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
avril 28 18:00:45 derpian kernel: pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
avril 28 18:00:45 derpian kernel: pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
avril 28 18:00:45 derpian kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
avril 28 18:00:45 derpian kernel: pci_bus 0000:03: resource 4 [io  0x0000-0x03af window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7 window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:03: resource 6 [io  0x03b0-0x03df window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff window]
avril 28 18:00:45 derpian kernel: pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
avril 28 18:00:45 derpian kernel: pci_bus 0000:05: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
avril 28 18:00:45 derpian kernel: NET: Registered protocol family 2
avril 28 18:00:45 derpian kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
avril 28 18:00:45 derpian kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
avril 28 18:00:45 derpian kernel: TCP: Hash tables configured (established 32768 bind 32768)
avril 28 18:00:45 derpian kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
avril 28 18:00:45 derpian kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
avril 28 18:00:45 derpian kernel: NET: Registered protocol family 1
avril 28 18:00:45 derpian kernel: pci 0000:01:00.0: Video device with shadowed ROM
avril 28 18:00:45 derpian kernel: PCI: CLS 64 bytes, default 64
avril 28 18:00:45 derpian kernel: Unpacking initramfs...
avril 28 18:00:45 derpian kernel: Freeing initrd memory: 16156K (ffff880036062000 - ffff880037029000)
avril 28 18:00:45 derpian kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
avril 28 18:00:45 derpian kernel: software IO TLB [mem 0xbb583000-0xbf583000] (64MB) mapped at [ffff8800bb583000-ffff8800bf582fff]
avril 28 18:00:45 derpian kernel: RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
avril 28 18:00:45 derpian kernel: hw unit of domain pp0-core 2^-16 Joules
avril 28 18:00:45 derpian kernel: hw unit of domain package 2^-16 Joules
avril 28 18:00:45 derpian kernel: hw unit of domain pp1-gpu 2^-16 Joules
avril 28 18:00:45 derpian kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
avril 28 18:00:45 derpian kernel: audit: initializing netlink subsys (disabled)
avril 28 18:00:45 derpian kernel: audit: type=2000 audit(1461859236.404:1): initialized
avril 28 18:00:45 derpian kernel: Initialise system trusted keyring
avril 28 18:00:45 derpian kernel: zbud: loaded
avril 28 18:00:45 derpian kernel: Key type asymmetric registered
avril 28 18:00:45 derpian kernel: Asymmetric key parser 'x509' registered
avril 28 18:00:45 derpian kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
avril 28 18:00:45 derpian kernel: io scheduler noop registered
avril 28 18:00:45 derpian kernel: io scheduler deadline registered
avril 28 18:00:45 derpian kernel: io scheduler cfq registered (default)
avril 28 18:00:45 derpian kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
avril 28 18:00:45 derpian kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
avril 28 18:00:45 derpian kernel: intel_idle: MWAIT substates: 0x1120
avril 28 18:00:45 derpian kernel: intel_idle: v0.4.1 model 0x2A
avril 28 18:00:45 derpian kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
avril 28 18:00:45 derpian kernel: GHES: HEST is not enabled!
avril 28 18:00:45 derpian kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
avril 28 18:00:45 derpian kernel: 00:02: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A
avril 28 18:00:45 derpian kernel: Linux agpgart interface v0.103
avril 28 18:00:45 derpian kernel: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
avril 28 18:00:45 derpian kernel: AMD IOMMUv2 functionality not available on this system
avril 28 18:00:45 derpian kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
avril 28 18:00:45 derpian kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
avril 28 18:00:45 derpian kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
avril 28 18:00:45 derpian kernel: mousedev: PS/2 mouse device common for all mice
avril 28 18:00:45 derpian kernel: rtc_cmos 00:03: RTC can wake from S4
avril 28 18:00:45 derpian kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
avril 28 18:00:45 derpian kernel: rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
avril 28 18:00:45 derpian kernel: Intel P-state driver initializing.
avril 28 18:00:45 derpian kernel: ledtrig-cpu: registered to indicate activity on CPUs
avril 28 18:00:45 derpian kernel: NET: Registered protocol family 10
avril 28 18:00:45 derpian kernel: mip6: Mobile IPv6
avril 28 18:00:45 derpian kernel: NET: Registered protocol family 17
avril 28 18:00:45 derpian kernel: mpls_gso: MPLS GSO support
avril 28 18:00:45 derpian kernel: microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
avril 28 18:00:45 derpian kernel: microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
avril 28 18:00:45 derpian kernel: microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
avril 28 18:00:45 derpian kernel: microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
avril 28 18:00:45 derpian kernel: microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
avril 28 18:00:45 derpian kernel: registered taskstats version 1
avril 28 18:00:45 derpian kernel: Loading compiled-in X.509 certificates
avril 28 18:00:45 derpian kernel: Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
avril 28 18:00:45 derpian kernel: zswap: loaded using pool lzo/zbud
avril 28 18:00:45 derpian kernel: rtc_cmos 00:03: setting system clock to 2016-04-28 16:00:37 UTC (1461859237)
avril 28 18:00:45 derpian kernel: PM: Hibernation image not present or could not be loaded.
avril 28 18:00:45 derpian kernel: Freeing unused kernel memory: 1328K (ffffffff81b26000 - ffffffff81c72000)
avril 28 18:00:45 derpian kernel: Write protecting the kernel read-only data: 10240k
avril 28 18:00:45 derpian kernel: Freeing unused kernel memory: 252K (ffff8800015c1000 - ffff880001600000)
avril 28 18:00:45 derpian kernel: Freeing unused kernel memory: 1156K (ffff8800018df000 - ffff880001a00000)
avril 28 18:00:45 derpian kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
avril 28 18:00:45 derpian systemd-udevd[77]: starting version 215
avril 28 18:00:45 derpian kernel: random: systemd-udevd urandom read with 1 bits of entropy available
avril 28 18:00:45 derpian kernel: fjes: module verification failed: signature and/or required key missing - tainting kernel
avril 28 18:00:45 derpian kernel: FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
avril 28 18:00:45 derpian kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
avril 28 18:00:45 derpian kernel: r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
avril 28 18:00:45 derpian kernel: r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc900008a0000, 6c:62:6d:38:d1:62, XID 0c200000 IRQ 25
avril 28 18:00:45 derpian kernel: r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
avril 28 18:00:45 derpian kernel: ACPI: bus type USB registered
avril 28 18:00:45 derpian kernel: usbcore: registered new interface driver usbfs
avril 28 18:00:45 derpian kernel: usbcore: registered new interface driver hub
avril 28 18:00:45 derpian kernel: usbcore: registered new device driver usb
avril 28 18:00:45 derpian kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
avril 28 18:00:45 derpian kernel: ehci-pci: EHCI PCI platform driver
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
avril 28 18:00:45 derpian kernel: SCSI subsystem initialized
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1a.0: debug port 2
avril 28 18:00:45 derpian kernel: libata version 3.00 loaded.
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb106000
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
avril 28 18:00:45 derpian kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
avril 28 18:00:45 derpian kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
avril 28 18:00:45 derpian kernel: usb usb1: Product: EHCI Host Controller
avril 28 18:00:45 derpian kernel: usb usb1: Manufacturer: Linux 4.5.0-0.bpo.1-amd64 ehci_hcd
avril 28 18:00:45 derpian kernel: usb usb1: SerialNumber: 0000:00:1a.0
avril 28 18:00:45 derpian kernel: hub 1-0:1.0: USB hub found
avril 28 18:00:45 derpian kernel: hub 1-0:1.0: 2 ports detected
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1d.0: debug port 2
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb105000
avril 28 18:00:45 derpian kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
avril 28 18:00:45 derpian kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
avril 28 18:00:45 derpian kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
avril 28 18:00:45 derpian kernel: usb usb2: Product: EHCI Host Controller
avril 28 18:00:45 derpian kernel: usb usb2: Manufacturer: Linux 4.5.0-0.bpo.1-amd64 ehci_hcd
avril 28 18:00:45 derpian kernel: usb usb2: SerialNumber: 0000:00:1d.0
avril 28 18:00:45 derpian kernel: hub 2-0:1.0: USB hub found
avril 28 18:00:45 derpian kernel: hub 2-0:1.0: 2 ports detected
avril 28 18:00:45 derpian kernel: ata_piix 0000:00:1f.2: version 2.13
avril 28 18:00:45 derpian kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
avril 28 18:00:45 derpian kernel: scsi host0: ata_piix
avril 28 18:00:45 derpian kernel: scsi host1: ata_piix
avril 28 18:00:45 derpian kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf090 irq 14
avril 28 18:00:45 derpian kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15
avril 28 18:00:45 derpian kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
avril 28 18:00:45 derpian kernel: scsi host2: ata_piix
avril 28 18:00:45 derpian kernel: scsi host3: ata_piix
avril 28 18:00:45 derpian kernel: ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
avril 28 18:00:45 derpian kernel: ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
avril 28 18:00:45 derpian kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
avril 28 18:00:45 derpian kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
avril 28 18:00:45 derpian kernel: usb 1-1: New USB device found, idVendor=8087, idProduct=0024
avril 28 18:00:45 derpian kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
avril 28 18:00:45 derpian kernel: hub 1-1:1.0: USB hub found
avril 28 18:00:45 derpian kernel: hub 1-1:1.0: 4 ports detected
avril 28 18:00:45 derpian kernel: usb 2-1: New USB device found, idVendor=8087, idProduct=0024
avril 28 18:00:45 derpian kernel: usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
avril 28 18:00:45 derpian kernel: hub 2-1:1.0: USB hub found
avril 28 18:00:45 derpian kernel: hub 2-1:1.0: 6 ports detected
avril 28 18:00:45 derpian kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
avril 28 18:00:45 derpian kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
avril 28 18:00:45 derpian kernel: ata4.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
avril 28 18:00:45 derpian kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
avril 28 18:00:45 derpian kernel: ata4.00: configured for UDMA/133
avril 28 18:00:45 derpian kernel: ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
avril 28 18:00:45 derpian kernel: ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
avril 28 18:00:45 derpian kernel: ata3.00: configured for UDMA/133
avril 28 18:00:45 derpian kernel: usb 1-1.2: new low-speed USB device number 3 using ehci-pci
avril 28 18:00:45 derpian kernel: usb 2-1.5: new low-speed USB device number 3 using ehci-pci
avril 28 18:00:45 derpian kernel: usb 1-1.2: New USB device found, idVendor=04b3, idProduct=310d
avril 28 18:00:45 derpian kernel: usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
avril 28 18:00:45 derpian kernel: hidraw: raw HID events driver (C) Jiri Kosina
avril 28 18:00:45 derpian kernel: usbcore: registered new interface driver usbhid
avril 28 18:00:45 derpian kernel: usbhid: USB HID core driver
avril 28 18:00:45 derpian kernel: input: HID 04b3:310d as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04B3:310D.0001/input/input3
avril 28 18:00:45 derpian kernel: hid-generic 0003:04B3:310D.0001: input,hidraw0: USB HID v1.11 Mouse [HID 04b3:310d] on usb-0000:00:1a.0-1.2/input0
avril 28 18:00:45 derpian kernel: usb 2-1.5: New USB device found, idVendor=0518, idProduct=0001
avril 28 18:00:45 derpian kernel: usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
avril 28 18:00:45 derpian kernel: usb 2-1.5: Product: USB-compliant keyboard
avril 28 18:00:45 derpian kernel: usb 2-1.5: Manufacturer: Plus More Enterprise LTD.
avril 28 18:00:45 derpian kernel: input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:0518:0001.0002/input/input4
avril 28 18:00:45 derpian kernel: hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.5/input0
avril 28 18:00:45 derpian kernel: input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:0518:0001.0003/input/input5
avril 28 18:00:45 derpian kernel: tsc: Refined TSC clocksource calibration: 3092.973 MHz
avril 28 18:00:45 derpian kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
avril 28 18:00:45 derpian kernel: hid-generic 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.5/input1
avril 28 18:00:45 derpian kernel: ata2.01: failed to resume link (SControl 0)
avril 28 18:00:45 derpian kernel: ata1.01: failed to resume link (SControl 0)
avril 28 18:00:45 derpian kernel: ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
avril 28 18:00:45 derpian kernel: ata1.01: SATA link down (SStatus 0 SControl 0)
avril 28 18:00:45 derpian kernel: ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
avril 28 18:00:45 derpian kernel: ata2.01: SATA link down (SStatus 0 SControl 0)
avril 28 18:00:45 derpian kernel: ata1.00: ATA-8: MAXTOR STM3160813AS, MC1H, max UDMA/133
avril 28 18:00:45 derpian kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
avril 28 18:00:45 derpian kernel: ata2.00: ATA-7: ST3320820AS, 3.AAD, max UDMA/133
avril 28 18:00:45 derpian kernel: ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
avril 28 18:00:45 derpian kernel: ata1.00: configured for UDMA/133
avril 28 18:00:45 derpian kernel: scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM316081 MC1H PQ: 0 ANSI: 5
avril 28 18:00:45 derpian kernel: ata2.00: configured for UDMA/133
avril 28 18:00:45 derpian kernel: scsi 1:0:0:0: Direct-Access     ATA      ST3320820AS      D    PQ: 0 ANSI: 5
avril 28 18:00:45 derpian kernel: scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
avril 28 18:00:45 derpian kernel: scsi 3:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 0C06 PQ: 0 ANSI: 5
avril 28 18:00:45 derpian kernel: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
avril 28 18:00:45 derpian kernel: sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
avril 28 18:00:45 derpian kernel: sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
avril 28 18:00:45 derpian kernel: sd 1:0:0:0: [sdb] Write Protect is off
avril 28 18:00:45 derpian kernel: sd 0:0:0:0: [sda] Write Protect is off
avril 28 18:00:45 derpian kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
avril 28 18:00:45 derpian kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
avril 28 18:00:45 derpian kernel: sd 2:0:0:0: [sdc] Write Protect is off
avril 28 18:00:45 derpian kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
avril 28 18:00:45 derpian kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
avril 28 18:00:45 derpian kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
avril 28 18:00:45 derpian kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
avril 28 18:00:45 derpian kernel:  sdb: sdb1
avril 28 18:00:45 derpian kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
avril 28 18:00:45 derpian kernel:  sdc: sdc1
avril 28 18:00:45 derpian kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
avril 28 18:00:45 derpian kernel: sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
avril 28 18:00:45 derpian kernel: sd 3:0:0:0: [sdd] Write Protect is off
avril 28 18:00:45 derpian kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
avril 28 18:00:45 derpian kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
avril 28 18:00:45 derpian kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
avril 28 18:00:45 derpian kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
avril 28 18:00:45 derpian kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
avril 28 18:00:45 derpian kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
avril 28 18:00:45 derpian kernel:  sda: sda1 sda2 < sda5 >
avril 28 18:00:45 derpian kernel: sd 0:0:0:0: [sda] Attached SCSI disk
avril 28 18:00:45 derpian kernel:  sdd: sdd1
avril 28 18:00:45 derpian kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
avril 28 18:00:45 derpian kernel: clocksource: Switched to clocksource tsc
avril 28 18:00:45 derpian kernel: PM: Starting manual resume from disk
avril 28 18:00:45 derpian kernel: PM: Hibernation image partition 8:5 present
avril 28 18:00:45 derpian kernel: PM: Looking for hibernation image.
avril 28 18:00:45 derpian kernel: PM: Image not found (code -22)
avril 28 18:00:45 derpian kernel: PM: Hibernation image not present or could not be loaded.
avril 28 18:00:45 derpian kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
avril 28 18:00:45 derpian kernel: random: nonblocking pool is initialized
avril 28 18:00:45 derpian systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
avril 28 18:00:45 derpian kernel: lp: driver loaded but no devices found
avril 28 18:00:45 derpian kernel: ppdev: user-space parallel port driver
avril 28 18:00:45 derpian kernel: parport_pc 00:05: reported by Plug and Play ACPI
avril 28 18:00:45 derpian kernel: parport0: PC-style at 0x378, irq 5 [PCSPP]
avril 28 18:00:45 derpian kernel: lp0: using parport0 (interrupt-driven).
avril 28 18:00:45 derpian kernel: fuse init (API version 7.24)
avril 28 18:00:45 derpian kernel: f71882fg: Found f71869a chip at 0x290, revision 32
avril 28 18:00:45 derpian kernel: ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000290-0x000000000000029F (\_SB.PCI0.SBRG.SIO1.RNTR) (20160108/utaddress-255)
avril 28 18:00:45 derpian kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
avril 28 18:00:45 derpian systemd-udevd[210]: starting version 215
avril 28 18:00:45 derpian systemd-journal[202]: Journal started
-- Subject: Le Journal a été démarré
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- Le processus du journal système a démarré, ouvert ses fichiers en écriture
-- et est prêt à traiter les requêtes.
avril 28 18:00:45 derpian systemd-modules-load[184]: Inserted module 'lp'
avril 28 18:00:46 derpian systemd-modules-load[184]: Inserted module 'ppdev'
avril 28 18:00:46 derpian systemd-modules-load[184]: Inserted module 'parport_pc'
avril 28 18:00:46 derpian systemd-modules-load[184]: Inserted module 'fuse'
avril 28 18:00:46 derpian systemd-modules-load[184]: Inserted module 'coretemp'
avril 28 18:00:46 derpian systemd-modules-load[184]: Failed to insert 'f71882fg': Device or resource busy
avril 28 18:00:46 derpian systemd-modules-load[184]: Inserted module 'lm78'
avril 28 18:00:46 derpian systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
avril 28 18:00:46 derpian systemd[1]: Failed to start Load Kernel Modules.
-- Subject: L'unité (unit) systemd-modules-load.service a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) systemd-modules-load.service a échoué, avec le résultat failed.
avril 28 18:00:46 derpian systemd[1]: Unit systemd-modules-load.service entered failed state.
avril 28 18:00:46 derpian mdadm-raid[212]: Generating udev events for MD arrays...done.
avril 28 18:00:47 derpian keyboard-setup[214]: Setting preliminary keymap...done.
avril 28 18:00:47 derpian kernel: EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
avril 28 18:00:48 derpian kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
avril 28 18:00:48 derpian kernel: ACPI: Power Button [PWRB]
avril 28 18:00:48 derpian kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
avril 28 18:00:48 derpian kernel: ACPI: Power Button [PWRF]
avril 28 18:00:48 derpian kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
avril 28 18:00:48 derpian kernel: [drm] Initialized drm 1.1.0 20060810
avril 28 18:00:48 derpian kernel: wmi: Mapper loaded
avril 28 18:00:48 derpian kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
avril 28 18:00:49 derpian kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
avril 28 18:00:49 derpian kernel: f71882fg: Found f71869a chip at 0x290, revision 32
avril 28 18:00:49 derpian kernel: ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000290-0x000000000000029F (\_SB.PCI0.SBRG.SIO1.RNTR) (20160108/utaddress-255)
avril 28 18:00:49 derpian kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
avril 28 18:00:49 derpian systemd-modules-load[298]: Failed to insert 'f71882fg': Device or resource busy
avril 28 18:00:49 derpian systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
avril 28 18:00:49 derpian systemd[1]: Failed to start Load Kernel Modules.
-- Subject: L'unité (unit) systemd-modules-load.service a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) systemd-modules-load.service a échoué, avec le résultat failed.
avril 28 18:00:49 derpian systemd[1]: Unit systemd-modules-load.service entered failed state.
avril 28 18:00:49 derpian kernel: Adding 6369276k swap on /dev/sda5.  Priority:-1 extents:1 across:6369276k FS
avril 28 18:00:49 derpian kernel: snd_hda_intel 0000:01:00.1: Disabling MSI
avril 28 18:00:49 derpian kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
avril 28 18:00:49 derpian kernel: iTCO_vendor_support: vendor-support=0
avril 28 18:00:49 derpian kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
avril 28 18:00:49 derpian kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
avril 28 18:00:49 derpian kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
avril 28 18:00:49 derpian kernel: nouveau 0000:01:00.0: NVIDIA GF108 (0c1000a1)
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:    inputs:
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
avril 28 18:00:49 derpian kernel: snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
avril 28 18:00:49 derpian kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
avril 28 18:00:49 derpian kernel: kvm: disabled by bios
avril 28 18:00:49 derpian kernel: nouveau 0000:01:00.0: bios: version 70.08.29.00.01
avril 28 18:00:49 derpian kernel: nouveau 0000:01:00.0: fb: 512 MiB DDR3
avril 28 18:00:49 derpian kernel: kvm: disabled by bios
avril 28 18:00:49 derpian kernel: kvm: disabled by bios
avril 28 18:00:50 derpian kernel: intel_rapl: Found RAPL domain package
avril 28 18:00:50 derpian kernel: intel_rapl: Found RAPL domain core
avril 28 18:00:50 derpian kernel: intel_rapl: Found RAPL domain uncore
avril 28 18:00:50 derpian mtp-probe[289]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5"
avril 28 18:00:50 derpian mtp-probe[278]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2"
avril 28 18:00:50 derpian mtp-probe[278]: bus: 1, device: 3 was not an MTP device
avril 28 18:00:50 derpian mtp-probe[289]: bus: 2, device: 3 was not an MTP device
avril 28 18:00:50 derpian kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
avril 28 18:00:50 derpian kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
avril 28 18:00:50 derpian kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
avril 28 18:00:50 derpian kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
avril 28 18:00:51 derpian kernel: [TTM] Zone  kernel: Available graphics memory: 2016584 kiB
avril 28 18:00:51 derpian kernel: [TTM] Initializing pool allocator
avril 28 18:00:51 derpian kernel: [TTM] Initializing DMA pool allocator
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: TMDS table version 2.0
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB version 4.0
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB outp 02: 08011392 00020020
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
avril 28 18:00:51 derpian kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
avril 28 18:00:51 derpian kernel: [drm] Driver supports precise vblank timestamp query.
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x60000, bo ffff880139b45000
avril 28 18:00:51 derpian kernel: fbcon: nouveaufb (fb0) is primary device
avril 28 18:00:51 derpian kernel: Console: switching to colour frame buffer device 170x48
avril 28 18:00:51 derpian kernel: nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
avril 28 18:00:51 derpian kernel: [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
avril 28 18:02:13 derpian systemd[1]: Job dev-sde1.device/start timed out.
avril 28 18:02:13 derpian systemd[1]: Timed out waiting for device dev-sde1.device.
-- Subject: L'unité (unit) dev-sde1.device a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) dev-sde1.device a échoué, avec le résultat timeout.
avril 28 18:02:13 derpian systemd[1]: Dependency failed for /media/SD.
-- Subject: L'unité (unit) media-SD.mount a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) media-SD.mount a échoué, avec le résultat dependency.
avril 28 18:02:13 derpian systemd[1]: Dependency failed for Local File Systems.
-- Subject: L'unité (unit) local-fs.target a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) local-fs.target a échoué, avec le résultat dependency.
avril 28 18:02:13 derpian systemd[1]: Job dev-md0.device/start timed out.
avril 28 18:02:13 derpian systemd[1]: Timed out waiting for device dev-md0.device.
-- Subject: L'unité (unit) dev-md0.device a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) dev-md0.device a échoué, avec le résultat timeout.
avril 28 18:02:13 derpian systemd[1]: Dependency failed for /media/stock.
-- Subject: L'unité (unit) media-stock.mount a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) media-stock.mount a échoué, avec le résultat dependency.
avril 28 18:02:13 derpian setserial[325]: Loading the saved-state of the serial devices...
avril 28 18:02:14 derpian systemd-journal[202]: Runtime journal is using 8.0M (max allowed 78.7M, trying to leave 118.1M free of 778.8M available → current limit 78.7M).
avril 28 18:02:14 derpian setserial[325]: /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
avril 28 18:02:14 derpian rdnssd[324]: Starting IPv6 Recursive DNS Server discovery Daemon: rdnssd.
avril 28 18:02:14 derpian kbd[326]: Setting console screen modes.
avril 28 18:02:14 derpian kbd[326]: setterm: $TERM n'est pas défini.
avril 28 18:02:15 derpian networking[349]: Configuring network interfaces...done.
avril 28 18:02:15 derpian console-setup[398]: Setting up console font and keymap...done.
avril 28 18:02:15 derpian rpcbind[490]: Starting rpcbind daemon....
avril 28 18:02:15 derpian rpc.statd[509]: Version 1.2.8 starting
avril 28 18:02:15 derpian sm-notify[510]: Version 1.2.8 starting
avril 28 18:02:15 derpian kernel: RPC: Registered named UNIX socket transport module.
avril 28 18:02:15 derpian kernel: RPC: Registered udp transport module.
avril 28 18:02:15 derpian kernel: RPC: Registered tcp transport module.
avril 28 18:02:15 derpian kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
avril 28 18:02:15 derpian kernel: FS-Cache: Loaded
avril 28 18:02:15 derpian kernel: FS-Cache: Netfs 'nfs' registered for caching
avril 28 18:02:16 derpian kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
avril 28 18:02:16 derpian nfs-common[504]: Starting NFS common utilities: statd idmapd.
avril 28 18:02:16 derpian systemd[328]: Failed at step EXEC spawning /bin/plymouth: No such file or directory
-- Subject: Le processus /bin/plymouth n'a pas pu être exécuté
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- Le processus /bin/plymouth n'a pas pu être exécuté, et a donc echoué.
--
-- Le code d'erreur renvoyé est 2.
avril 28 18:02:33 derpian kernel: usb 2-1.6: new high-speed USB device number 4 using ehci-pci
avril 28 18:02:33 derpian kernel: usb 2-1.6: new high-speed USB device number 5 using ehci-pci
avril 28 18:02:33 derpian kernel: usb 2-1.6: New USB device found, idVendor=0930, idProduct=6545
avril 28 18:02:33 derpian kernel: usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
avril 28 18:02:33 derpian kernel: usb 2-1.6: Product: TransMemory
avril 28 18:02:33 derpian kernel: usb 2-1.6: Manufacturer: TOSHIBA
avril 28 18:02:33 derpian kernel: usb 2-1.6: SerialNumber: 001CC0C60D71E831F320005B
avril 28 18:02:33 derpian mtp-probe[533]: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6"
avril 28 18:02:33 derpian mtp-probe[533]: bus: 2, device: 5 was not an MTP device
avril 28 18:02:33 derpian kernel: usb-storage 2-1.6:1.0: USB Mass Storage device detected
avril 28 18:02:33 derpian kernel: scsi host4: usb-storage 2-1.6:1.0
avril 28 18:02:33 derpian kernel: usbcore: registered new interface driver usb-storage
avril 28 18:02:33 derpian kernel: usbcore: registered new interface driver uas
avril 28 18:02:35 derpian kernel: scsi 4:0:0:0: Direct-Access     TOSHIBA  TransMemory      PMAP PQ: 0 ANSI: 0 CCS
avril 28 18:02:35 derpian kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
avril 28 18:02:36 derpian kernel: sd 4:0:0:0: [sde] 15240576 512-byte logical blocks: (7.80 GB/7.27 GiB)
avril 28 18:02:36 derpian kernel: sd 4:0:0:0: [sde] Write Protect is off
avril 28 18:02:36 derpian kernel: sd 4:0:0:0: [sde] Mode Sense: 23 00 00 00
avril 28 18:02:36 derpian kernel: sd 4:0:0:0: [sde] No Caching mode page found
avril 28 18:02:36 derpian kernel: sd 4:0:0:0: [sde] Assuming drive cache: write through
avril 28 18:02:36 derpian kernel:  sde: sde1
avril 28 18:02:36 derpian kernel: sd 4:0:0:0: [sde] Attached SCSI removable disk
avril 28 18:02:36 derpian systemd[1]: media-SD.mount: Directory /media/SD to mount over is not empty, mounting anyway.
-- Subject: Le point de montage n'est pas vide
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- Le répertoire /media/SD est spécifié comme point de montage (second champ du
-- fichier /etc/fstab, ou champ Where= dans une unité (unit) systemd) et n'est pas
-- vide.
-- Cela ne perturbe pas le montage du système de fichiers, mais les fichiers
-- préalablement présents dans ce répertoire sont devenus inaccessibles.
-- Pour atteindre ces fichiers, veuillez monter manuellement le système de
-- fichiers sous-jacent à un autre emplacement.
avril 28 18:02:36 derpian mount[542]: mount: type de système de fichiers « fat32 » inconnu
avril 28 18:02:36 derpian systemd[1]: media-SD.mount mount process exited, code=exited status=32
avril 28 18:02:36 derpian systemd[1]: Failed to mount /media/SD.
-- Subject: L'unité (unit) media-SD.mount a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) media-SD.mount a échoué, avec le résultat failed.
avril 28 18:02:36 derpian systemd[1]: Unit media-SD.mount entered failed state.
avril 28 18:03:56 derpian ntfs-3g[552]: Version 2014.2.15AR.2 integrated FUSE 28
avril 28 18:03:56 derpian ntfs-3g[552]: Mounted /dev/sde1 (Read-Write, label "Nazmi 8GB", NTFS 3.1)
avril 28 18:03:56 derpian ntfs-3g[552]: Cmdline options: rw
avril 28 18:03:56 derpian ntfs-3g[552]: Mount options: rw,allow_other,nonempty,relatime,fsname=/dev/sde1,blkdev,blksize=4096
avril 28 18:03:56 derpian ntfs-3g[552]: Ownership and permissions disabled, configuration type 7



journalctl

merci d'avance si ça vous permet de trouver ce qui cloche, j'imagine que c'est lié à mdadm

Dernière modification par nazmi (28-04-2016 17:10:37)

Hors ligne

#5 29-04-2016 21:56:53

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

J'ai réessayé sans les disques, mais ça ne marche pas mieux, serais-t-ce dû à un problème autre que mdadm, peut être un problème de disque ?
Pensez vous qu'un coup de fsck pourrait corriger quelquechose ?


Merci d'avance

Hors ligne

#6 01-05-2016 01:59:20

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

J'ai regardé les logs que j'ai envoyé précédemment,  une partie semble louche:

avril 28 18:00:46 derpian systemd-modules-load[184]: Failed to insert 'f71882fg': Device or resource busy
avril 28 18:00:46 derpian systemd-modules-load[184]: Inserted module 'lm78'
avril 28 18:00:46 derpian systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
avril 28 18:00:46 derpian systemd[1]: Failed to start Load Kernel Modules.
-- Subject: L'unité (unit) systemd-modules-load.service a échoué
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- L'unité (unit) systemd-modules-load.service a échoué, avec le résultat failed.
avril 28 18:00:46 derpian systemd[1]: Unit systemd-modules-load.service entered failed state.
avril 28 18:00:46 derpian mdadm-raid[212]: Generating udev events for MD arrays...done.



A quoi correspond "Load Kernel Modules" ? Je ne comprends vraiment pas ce plantage, si quelqu'un a une idée, merci car je n'ai jamais fait face à ça et je ne sais pas comment résoudre ce problème neutral

Hors ligne

#7 01-05-2016 10:50:55

anonyme
Invité

Re : {Resolu]Welcome to emergency mode !

je vois 4 disques

sde => une clé usb de 8Go
sdc => ton raid 1 de 1To

sdb de 320 Go et sda de 160Go

mais pas de problemes , il y aurait un soucis sur le chargement d un modules d'aprés ton post au dessus
je comprend pas trop ton probleme et pourquoi tu enlève les disques  roll


avril 28 18:00:45 derpian kernel: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
avril 28 18:00:45 derpian kernel: sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
avril 28 18:00:45 derpian kernel: sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
 



ps: en mode rescue tu te connecte au systeme (en console ) ?
sur ton log je vois le chargement du driver nouveau , par hasard il te propose pas "continuer" (ou entrer le mdp administrateur mode maintenance) pour terminer le chargement de jessie
pour voir si tu va jusqu au bout , si tu arrive au logging graphique ?

Dernière modification par anonyme (01-05-2016 11:06:39)

#8 01-05-2016 14:19:28

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

Merci de ta réponse,

Oui, j'avais 4 disques, le système est sur sda de 160GB, sdb c'est du stockage de 320GB, sdc est un des disques de 1TB du RAID, sdd était déconnecté, il fait 1TB et c'est le second disque du RAID, sde est la clé sur laquelle j'ai sauvegardé les logs.

Au début j'ai pensé que le problème était lié à mdadm qui aurait planté quelquechose mais tu as raison, c'est pour ça que j'ai voulu retirer un disque, je sais c'est pas super logique mais j'ai pensé que ça amrcherait hmm

Bizarre qu'il n'ait pas enregistré le log complet, j'ai bien une proposition d'entrer mon mdp root, quand je le fais j'ai un shell root mais je ne suis pas encore allé plus loin, faut il que je fasse un startx ?

Merci d'avance

Hors ligne

#9 01-05-2016 16:18:37

anonyme
Invité

Re : {Resolu]Welcome to emergency mode !

il doit te proposer 2 choses
soit tu entre le mdp et tu est en root (console pure )
soit tu fait une combinaison de touches (c'est ecrit normalement ) pour continuer
Aprés pourquoi "emergency mode"  , faudra peut etre plus barbu que moi hmm
mais au moins tu va voir si tu arrive jusqu au bureau sans soucis

#10 01-05-2016 20:22:26

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

Oui, il propose Ctrl+D, ça n'a aucun effet, quand j'entre mon MDP, j'ai un shell root, rien de plus, c'est bien startx pour démarrer une session graphique ?

Merci d'avance

Hors ligne

#11 02-05-2016 09:16:45

anonyme
Invité

Re : {Resolu]Welcome to emergency mode !

tu peut tenter


service ligthdm start
 


en remplaçant "ligthdm" par ton lanceur que tu utilise
mais je doute que ça fonctionne

#12 02-05-2016 12:22:21

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

merci, je vais tester pour voir, mais je crois qu'il va me falloir faire un gros coup de propre dans mes systèmes sous peu

pour kde ce sera kdm  ?

Hors ligne

#13 02-05-2016 13:29:21

raleur
Membre
Inscription : 03-10-2014

Re : {Resolu]Welcome to emergency mode !

Je n'ai vu aucune référence à une détection ou une tentative d'assemblage de l'ensemble RAID dans les logs.

Que contient le fichier /etc/fstab ? S'il y a une référence à l'ensemble RAID ou d'autres volumes absents (je vois du SD), commente-la.

Il vaut mieux montrer que raconter.

Hors ligne

#14 03-05-2016 00:04:30

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

Merci pour ta réponse,

avant il y avait une start task de 1:30 pour mdadm ce qui me faisait penser qu'il avait à voir avec le problème (maintenant ça ne le fait plus, ca se met juste en recovery), j'ai voulu copier le contenu de /etc/fstab mais impossible de faire reconnaître une clé pour récupérer les infos sad

Je ne comprends pas ce qu'il se passe, c'est comme si tous mes ordis voulaient foirer (j'ai aussi des problèmes avec mon portable qui est ma dernière machine fonctionnelle yikes ). J'imagine même pas ce que ce serait si j'étais sous windows, BSOD à répétition et cie big_smile

Mais si je ne suis pas en mesure de transmettre le /etc/fstab pour l'instant, j'ai commenté tout le bazar, je redémarre pour voir si ça change quelque chose (SD= clé avec laquelle j'ai extirpé les logs de la machine en la montant mais j'avais besoin  d'abord de l'ajouter dans fstab, stock= le RAID)

EDIT: J'ai laissé le cdrom, ca redémarre à l'instant, il y a toujours le failed load kernel modules, mais KDE A DÉMARRÉ !!!

mais comment est-ce que je remet tout en état de marche ? car si je remet le /dev/md0 dans fstab, ça va replanter, non ?

Merci à tous pour l'aide que vous m'avez apporté pour remettre ma configuration en marche et merci d'avance pour vos conseils à venir smile

Dernière modification par nazmi (03-05-2016 00:09:14)

Hors ligne

#15 03-05-2016 15:31:04

raleur
Membre
Inscription : 03-10-2014

Re : {Resolu]Welcome to emergency mode !

Vérifie l'état de ton RAID.

Il vaut mieux montrer que raconter.

Hors ligne

#16 03-05-2016 23:13:36

nazmi
Membre
Lieu : Normandie
Distrib. : DFLINUX 98 Stretch | GNU/LINUX Debian Jessie
Noyau : Linux 4.9.0-11-amd64 | Linux 4.3.0-0.bpo.1-amd64
(G)UI : XFCE | Unity/Gnome/KDE/Cinnamon/LXDE/XFCE (2009-20
Inscription : 17-07-2015

Re : {Resolu]Welcome to emergency mode !

Ça se complique: rien de détecté neutral
alors que les disques physiques (sdc et sdd) sont bien là, je n'ose pas changer les choses, que faire ?

ré-assembler un raid avec mdadm ? (mais comment m'assurer qu'elle ne va pas modifier le contenu ?)
monter un disque et récupérer tout ce que je peux puis tout remettre à blanc ?

Merci d'avance

Hors ligne

Pied de page des forums