Salut à tous !
J'ai refait une petite installation sur un ordi et j'ai de nouveau des problèmes !
>>> Impossible de rebooter sur windows ! J'ai pris quelques libertés en supprimant des partitions liées à windows, me disant que EFI ne m'embêterai plus au démarrage mais voilà qu'en fait il n'est plus possible du tout de booter via grub (pour l'instant) et je n'ai pas d'autres solutions. Avec votre aide, peut-être pourrais-je configurer grub pour remettre de l'ordre dans tout ça ?
Matos : ASUS R556L
OS : Handylinux dualboot Windows 10
Voici les info :
$ sudo fdisk -l
Disk /dev/sda: 931,5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x18b55ab0
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 567296 781408255 780840960 372,3G 7 HPFS/NTFS/exFAT
/dev/sda2 1941805056 1953523711 11718656 5,6G 82 Linux swap / Solaris
/dev/sda3 781408256 1941805055 1160396800 553,3G 83 Linux
Partition table entries are not in disk order.
Mon /boot/grub/grub.cfg :
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
else
search --no-floppy --fs-uuid --set=root 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
else
search --no-floppy --fs-uuid --set=root 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
fi
insmod tga
background_image -m stretch /usr/share/images/grub/handylinux.tga
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
fi
play 480 440 1
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
else
search --no-floppy --fs-uuid --set=root 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
fi
insmod tga
if background_image /usr/share/images/grub/handylinux.tga; then
true
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'HandyLinux GNU/Linux' --class handylinux --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7e9b0480-b430-4b34-a50d-03f4ed1d6ee3' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
else
search --no-floppy --fs-uuid --set=root 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
fi
echo 'Chargement de Linux 3.16.0-4-amd64…'
linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=7e9b0480-b430-4b34-a50d-03f4ed1d6ee3 ro quiet
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-4-amd64
}
submenu 'Options avancées pour HandyLinux GNU/Linux' $menuentry_id_option 'gnulinux-advanced-7e9b0480-b430-4b34-a50d-03f4ed1d6ee3' {
menuentry 'HandyLinux GNU/Linux, avec Linux 3.16.0-4-amd64' --class handylinux --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-4-amd64-advanced-7e9b0480-b430-4b34-a50d-03f4ed1d6ee3' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
else
search --no-floppy --fs-uuid --set=root 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
fi
echo 'Chargement de Linux 3.16.0-4-amd64…'
linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=7e9b0480-b430-4b34-a50d-03f4ed1d6ee3 ro quiet
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-4-amd64
}
menuentry 'HandyLinux GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode)' --class handylinux --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-4-amd64-recovery-7e9b0480-b430-4b34-a50d-03f4ed1d6ee3' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
else
search --no-floppy --fs-uuid --set=root 7e9b0480-b430-4b34-a50d-03f4ed1d6ee3
fi
echo 'Chargement de Linux 3.16.0-4-amd64…'
linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=7e9b0480-b430-4b34-a50d-03f4ed1d6ee3 ro single
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-4-amd64
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-0AD4CE12D4CE0045' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 0AD4CE12D4CE0045
else
search --no-floppy --fs-uuid --set=root 0AD4CE12D4CE0045
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
Mon /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_BACKGROUND="/usr/share/images/grub/handylinux.tga"
GRUB_INIT_TUNE="480 440 1"
Merci pour votre attention et votre aide encore une fois !
OSpring
Dernière modification par OSpring (17-10-2016 04:43:30)