logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 09-03-2017 10:42:40

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

smp boot cpu not responding [RESOLU]

Bonjour ,
depuis les récentes mises a jour j'ai cette annonce au démarrage 1jour sur 3
souvent le matin lorsque je demarre

cpu1 puis cpu2 nor responding puis l'ordinateur redémarre ; ensuite il démarre correctement
sur une debian 8 stable 64bits

cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family  : 6
model   : 23
model name  : Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
stepping  : 10
microcode : 0xa07
cpu MHz   : 2000.000
cache size  : 3072 KB
physical id : 0
siblings  : 4
core id   : 0
cpu cores : 4
apicid    : 0
initial apicid  : 0
fpu   : yes
fpu_exception : yes
cpuid level : 13
wp    : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips  : 5333.44
clflush size  : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family  : 6
model   : 23
model name  : Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
stepping  : 10
microcode : 0xa07
cpu MHz   : 2000.000
cache size  : 3072 KB
physical id : 0
siblings  : 4
core id   : 3
cpu cores : 4
apicid    : 3
initial apicid  : 3
fpu   : yes
fpu_exception : yes
cpuid level : 13
wp    : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips  : 5333.44
clflush size  : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family  : 6
model   : 23
model name  : Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
stepping  : 10
microcode : 0xa07
cpu MHz   : 2000.000
cache size  : 3072 KB
physical id : 0
siblings  : 4
core id   : 2
cpu cores : 4
apicid    : 2
initial apicid  : 2
fpu   : yes
fpu_exception : yes
cpuid level : 13
wp    : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips  : 5333.44
clflush size  : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family  : 6
model   : 23
model name  : Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
stepping  : 10
microcode : 0xa07
cpu MHz   : 2000.000
cache size  : 3072 KB
physical id : 0
siblings  : 4
core id   : 1
cpu cores : 4
apicid    : 1
initial apicid  : 1
fpu   : yes
fpu_exception : yes
cpuid level : 13
wp    : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips  : 5333.44
clflush size  : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:



cat /var/log/dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=16cdccdd-d99f-4cd6-a7af-4db843d27b28 ro quiet init=/lib/sysvinit/init
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-ES2L/G31M-S2L, BIOS F8 02/05/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f5200-0x000f520f] mapped at [ffff8800000f5200]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[    0.000000]  [mem 0x7fc00000-0x7fdfffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[    0.000000]  [mem 0x7c000000-0x7fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fedffff]
[    0.000000]  [mem 0x7fe00000-0x7fedffff] page 4k
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36370000-0x371affff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6BF0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x000000007FEE3040 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x000000007FEE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x000000007FEE3180 0040E8 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x000000007FEE0000 000040
[    0.000000] ACPI: HPET 0x000000007FEE73C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x000000007FEE7440 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 0x000000007FEE72C0 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x000000007FEE7DA0 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7fedffff]
[    0.000000]   NODE_DATA [mem 0x7fedb000-0x7fedffff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7fedffff]
[    0.000000] On node 0 totalpages: 523902
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7109 pages used for memmap
[    0.000000]   DMA32 zone: 519904 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x7ff00000-0xbfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516716
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=16cdccdd-d99f-4cd6-a7af-4db843d27b28 ro quiet init=/lib/sysvinit/init
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2040316K/2095608K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 55292K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2666.853 MHz processor
[    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.70 BogoMIPS (lpj=10667412)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004023] ACPI: Core revision 20140424
[    0.009485] ACPI: All ACPI Tables successfully acquired
[    0.009518] Security Framework initialized
[    0.009532] AppArmor: AppArmor disabled by boot time parameter
[    0.009533] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009683] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010735] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.011205] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.011209] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.011490] Initializing cgroup subsys memory
[    0.011496] Initializing cgroup subsys devices
[    0.011505] Initializing cgroup subsys freezer
[    0.011508] Initializing cgroup subsys net_cls
[    0.011513] Initializing cgroup subsys blkio
[    0.011518] Initializing cgroup subsys perf_event
[    0.011520] Initializing cgroup subsys net_prio
[    0.011547] CPU: Physical Processor ID: 0
[    0.011548] CPU: Processor Core ID: 0
[    0.011550] mce: CPU supports 6 MCE banks
[    0.011557] CPU0: Thermal monitoring enabled (TM2)
[    0.011560] process: using mwait in idle threads
[    0.011565] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[    0.011646] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.014577] ftrace: allocating 21679 entries in 85 pages
[    0.020427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064008] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz (fam: 06, model: 17, stepping: 0a)
[    0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:             000000ffffffffff
[    0.068000] ... max period:             000000007fffffff
[    0.068000] ... fixed-purpose events:   3
[    0.068000] ... event mask:             0000000700000003
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.078880] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.079015]  #2 #3
[    0.104011] x86: Booted up 1 node, 4 CPUs
[    0.104014] smpboot: Total of 4 processors activated (21334.82 BogoMIPS)
[    0.108161] devtmpfs: initialized
[    0.110846] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[    0.112490] pinctrl core: initialized pinctrl subsystem
[    0.112586] NET: Registered protocol family 16
[    0.112705] cpuidle: using governor ladder
[    0.112708] cpuidle: using governor menu
[    0.112743] ACPI: bus type PCI registered
[    0.112745] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112850] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.112853] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.113204] PCI: Using configuration type 1 for base access
[    0.113373] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.113374] mtrr: probably your BIOS does not setup all CPUs.
[    0.113375] mtrr: corrected configuration.
[    0.124115] ACPI: Added _OSI(Module Device)
[    0.124115] ACPI: Added _OSI(Processor Device)
[    0.124115] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.124115] ACPI: Added _OSI(Processor Aggregator Device)
[    0.128192] ACPI: Dynamic OEM Table Load:
[    0.128200] ACPI: SSDT 0xFFFF88007CB89C00 00022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.128423] ACPI: Dynamic OEM Table Load:
[    0.128427] ACPI: SSDT 0xFFFF88007CB55200 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.128633] ACPI: Dynamic OEM Table Load:
[    0.128637] ACPI: SSDT 0xFFFF88007CB55000 000152 (v01 PmRef  Cpu2Ist  00003000 INTL 20040311)
[    0.128846] ACPI: Dynamic OEM Table Load:
[    0.128850] ACPI: SSDT 0xFFFF88007CB8AE00 000152 (v01 PmRef  Cpu3Ist  00003000 INTL 20040311)
[    0.129094] ACPI: Interpreter enabled
[    0.129099] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.129103] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.129115] ACPI: (supports S0 S3 S4 S5)
[    0.129117] ACPI: Using IOAPIC for interrupt routing
[    0.129143] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.132883] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.132889] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.132894] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.133104] PCI host bridge to bus 0000:00
[    0.133107] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.133109] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.133111] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.133113] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.133115] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.133117] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
[    0.133124] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.133214] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.133245] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.133339] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.133354] pci 0000:00:1b.0: reg 0x10: [mem 0xe7100000-0xe7103fff 64bit]
[    0.133413] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.133452] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.133497] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.133557] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.133597] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.133642] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.133703] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.133742] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.133788] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.133821] pci 0000:00:1d.0: reg 0x20: [io  0xe300-0xe31f]
[    0.133870] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.133912] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.133944] pci 0000:00:1d.1: reg 0x20: [io  0xe000-0xe01f]
[    0.133993] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.134036] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.134068] pci 0000:00:1d.2: reg 0x20: [io  0xe100-0xe11f]
[    0.134117] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.134159] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.134191] pci 0000:00:1d.3: reg 0x20: [io  0xe200-0xe21f]
[    0.134240] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.134288] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.134302] pci 0000:00:1d.7: reg 0x10: [mem 0xe7104000-0xe71043ff]
[    0.134396] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.134443] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.134513] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.134559] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.134626] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0400-0x047f]: address conflict with ACPI CPU throttle [io  0x0410-0x0415]
[    0.134630] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.134634] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.134637] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.134730] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
[    0.134741] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.134747] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.134754] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.134760] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.134767] pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf00f]
[    0.134780] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.134781] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.134783] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.134785] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.134801] pci 0000:00:1f.2: PME# supported from D3hot
[    0.134876] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.134919] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.135045] pci 0000:01:00.0: [10de:06e4] type 00 class 0x030000
[    0.135055] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
[    0.135064] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.135073] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit]
[    0.135079] pci 0000:01:00.0: reg 0x24: [io  0xb000-0xb07f]
[    0.135086] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.135164] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.135167] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.135169] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff]
[    0.135173] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.135224] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.135227] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
[    0.135294] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.135311] pci 0000:03:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.135336] pci 0000:03:00.0: reg 0x18: [mem 0xe7010000-0xe7010fff 64bit pref]
[    0.135351] pci 0000:03:00.0: reg 0x20: [mem 0xe7000000-0xe700ffff 64bit pref]
[    0.135362] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.135431] pci 0000:03:00.0: supports D1 D2
[    0.135433] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140018] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.140022] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.140026] pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe4ffffff]
[    0.140032] pci 0000:00:1c.1:   bridge window [mem 0xe7000000-0xe70fffff 64bit pref]
[    0.140084] pci 0000:04:01.0: [10b7:9200] type 00 class 0x020000
[    0.140100] pci 0000:04:01.0: reg 0x10: [io  0xd000-0xd07f]
[    0.140110] pci 0000:04:01.0: reg 0x14: [mem 0xe6000000-0xe600007f]
[    0.140147] pci 0000:04:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.140173] pci 0000:04:01.0: supports D1 D2
[    0.140175] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140267] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.140270] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.140273] pci 0000:00:1e.0:   bridge window [mem 0xe5000000-0xe6ffffff]
[    0.140278] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.140280] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.140282] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.140284] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.140286] pci 0000:00:1e.0:   bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
[    0.140782] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.140832] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.140881] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.140931] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.140980] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.141030] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.141080] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.141130] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.141224] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.141308] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.141308] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.141308] vgaarb: loaded
[    0.141308] vgaarb: bridge control possible 0000:01:00.0
[    0.141308] PCI: Using ACPI for IRQ routing
[    0.146225] PCI: pci_cache_line_size set to 64 bytes
[    0.146260] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.146262] e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
[    0.146395] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.146400] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.146403] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.148035] Switched to clocksource hpet
[    0.154348] pnp: PnP ACPI init
[    0.154361] ACPI: bus type PNP registered
[    0.154524] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.154527] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.154529] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.154532] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.154534] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.154537] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154613] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.154725] pnp 00:02: [dma 2]
[    0.154760] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.154942] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.155133] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.155260] system 00:05: [io  0x0400-0x04cf] could not be reserved
[    0.155263] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155451] system 00:06: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.155454] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155629] system 00:07: [mem 0x000d1800-0x000d3fff] has been reserved
[    0.155632] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.155634] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.155636] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.155638] system 00:07: [mem 0x7fee0000-0x7fefffff] could not be reserved
[    0.155641] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.155643] system 00:07: [mem 0x00100000-0x7fedffff] could not be reserved
[    0.155645] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.155647] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.155649] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.155652] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.155654] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.155656] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.155658] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[    0.155660] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.155666] pnp: PnP ACPI: found 8 devices
[    0.155667] ACPI: bus type PNP unregistered
[    0.164205] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.164209] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.164222] pci 0000:00:1f.0: BAR 13: [io  0x0400-0x047f] has bogus alignment
[    0.164225] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.164227] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.164233] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7ff00000-0x800fffff]
[    0.164237] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[    0.164240] pci 0000:01:00.0: BAR 6: assigned [mem 0xe3000000-0xe301ffff pref]
[    0.164242] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.164244] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.164248] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff]
[    0.164250] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164253] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.164256] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
[    0.164259] pci 0000:00:1c.0:   bridge window [mem 0x7ff00000-0x800fffff]
[    0.164263] pci 0000:00:1c.0:   bridge window [mem 0x80100000-0x802fffff 64bit pref]
[    0.164268] pci 0000:03:00.0: BAR 6: assigned [mem 0xe4000000-0xe400ffff pref]
[    0.164270] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.164272] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.164276] pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe4ffffff]
[    0.164279] pci 0000:00:1c.1:   bridge window [mem 0xe7000000-0xe70fffff 64bit pref]
[    0.164285] pci 0000:04:01.0: BAR 6: assigned [mem 0xe5000000-0xe501ffff pref]
[    0.164287] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.164289] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.164293] pci 0000:00:1e.0:   bridge window [mem 0xe5000000-0xe6ffffff]
[    0.164300] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.164301] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.164303] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.164305] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.164307] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff]
[    0.164309] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.164311] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe3ffffff]
[    0.164313] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164315] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.164316] pci_bus 0000:02: resource 1 [mem 0x7ff00000-0x800fffff]
[    0.164318] pci_bus 0000:02: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
[    0.164320] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.164322] pci_bus 0000:03: resource 1 [mem 0xe4000000-0xe4ffffff]
[    0.164324] pci_bus 0000:03: resource 2 [mem 0xe7000000-0xe70fffff 64bit pref]
[    0.164326] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.164327] pci_bus 0000:04: resource 1 [mem 0xe5000000-0xe6ffffff]
[    0.164329] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.164331] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.164333] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.164335] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[    0.164336] pci_bus 0000:04: resource 8 [mem 0x7ff00000-0xfebfffff]
[    0.164433] NET: Registered protocol family 2
[    0.164755] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.164831] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.164939] TCP: Hash tables configured (established 16384 bind 16384)
[    0.164984] TCP: reno registered
[    0.164989] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.165004] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.165104] NET: Registered protocol family 1
[    0.165654] pci 0000:01:00.0: Video device with shadowed ROM
[    0.165661] PCI: CLS 32 bytes, default 64
[    0.165714] Unpacking initramfs...
[    0.437289] Freeing initrd memory: 14592K (ffff880036370000 - ffff8800371b0000)
[    0.437644] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[    0.437650] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[    0.437665] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[    0.437679] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[    0.437768] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.438093] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.438139] audit: initializing netlink subsys (disabled)
[    0.438160] audit: type=2000 audit(1453541091.436:1): initialized
[    0.438486] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.438505] zbud: loaded
[    0.438774] VFS: Disk quotas dquot_6.5.2
[    0.438801] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.438862] msgmni has been set to 4013
[    0.439283] alg: No test for stdrng (krng)
[    0.439318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.439392] io scheduler noop registered
[    0.439395] io scheduler deadline registered
[    0.439450] io scheduler cfq registered (default)
[    0.439622] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.439723] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.439837] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.439936] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.439954] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.439977] intel_idle: does not run on family 6 model 23
[    0.440038] GHES: HEST is not enabled!
[    0.440100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.460424] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.460776] Linux agpgart interface v0.103
[    0.460938] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.461316] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.461323] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.461472] mousedev: PS/2 mouse device common for all mice
[    0.461538] rtc_cmos 00:01: RTC can wake from S4
[    0.461688] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.461710] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.461727] ledtrig-cpu: registered to indicate activity on CPUs
[    0.461920] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.461922] AMD IOMMUv2 functionality not available on this system
[    0.462017] TCP: cubic registered
[    0.462108] NET: Registered protocol family 10
[    0.462430] mip6: Mobile IPv6
[    0.462433] NET: Registered protocol family 17
[    0.462439] mpls_gso: MPLS GSO support
[    0.462841] registered taskstats version 1
[    0.463240] rtc_cmos 00:01: setting system clock to 2016-01-23 09:24:51 UTC (1453541091)
[    0.463296] PM: Hibernation image not present or could not be loaded.
[    0.464375] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    0.464377] Write protecting the kernel read-only data: 8192k
[    0.464871] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[    0.465373] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.475792] systemd-udevd[72]: starting version 215
[    0.476127] random: systemd-udevd urandom read with 2 bits of entropy available
[    0.486035] Floppy drive(s): fd0 is 1.44M
[    0.489243] 3c59x: Donald Becker and others.
[    0.489252] 0000:04:01.0: 3Com PCI 3c905C Tornado at ffffc90000368000.
[    0.490626] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.490640] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.490687] ACPI: bus type USB registered
[    0.490720] usbcore: registered new interface driver usbfs
[    0.490732] usbcore: registered new interface driver hub
[    0.490796] usbcore: registered new device driver usb
[    0.490858] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.491067] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000036a000, 00:24:1d:65:e3:29, XID 1c4000c0 IRQ 43
[    0.491069] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    0.491340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.491646] uhci_hcd: USB Universal Host Controller Interface driver
[    0.491682] ehci-pci: EHCI PCI platform driver
[    0.491785] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.491792] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.491799] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.491828] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    0.491897] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.491899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.491901] usb usb1: Product: UHCI Host Controller
[    0.491903] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.491905] usb usb1: SerialNumber: 0000:00:1d.0
[    0.492158] hub 1-0:1.0: USB hub found
[    0.492167] hub 1-0:1.0: 2 ports detected
[    0.492491] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.492499] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    0.492505] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.492530] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[    0.492668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.492670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.492672] usb usb2: Product: UHCI Host Controller
[    0.492674] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.492676] usb usb2: SerialNumber: 0000:00:1d.1
[    0.494180] SCSI subsystem initialized
[    0.495639] hub 2-0:1.0: USB hub found
[    0.495647] hub 2-0:1.0: 2 ports detected
[    0.495857] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.495864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    0.495870] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.495903] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[    0.495956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.495958] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.495960] usb usb3: Product: UHCI Host Controller
[    0.495962] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.495963] usb usb3: SerialNumber: 0000:00:1d.2
[    0.496106] hub 3-0:1.0: USB hub found
[    0.496113] hub 3-0:1.0: 2 ports detected
[    0.496277] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.496283] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    0.496289] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.496312] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[    0.496357] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.496359] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.496361] usb usb4: Product: UHCI Host Controller
[    0.496363] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.496365] usb usb4: SerialNumber: 0000:00:1d.3
[    0.496492] hub 4-0:1.0: USB hub found
[    0.496499] hub 4-0:1.0: 2 ports detected
[    0.496849] libata version 3.00 loaded.
[    0.497665] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.497673] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    0.501578] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.501585] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe7104000
[    0.503639] FDC 0 is a post-1991 82077
[    0.512022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.512089] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.512092] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.512095] usb usb5: Product: EHCI Host Controller
[    0.512098] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.512100] usb usb5: SerialNumber: 0000:00:1d.7
[    0.512284] hub 5-0:1.0: USB hub found
[    0.512291] hub 5-0:1.0: 8 ports detected
[    0.536084] hub 1-0:1.0: USB hub found
[    0.536094] hub 1-0:1.0: 2 ports detected
[    0.560066] hub 2-0:1.0: USB hub found
[    0.560079] hub 2-0:1.0: 2 ports detected
[    0.584072] hub 3-0:1.0: USB hub found
[    0.584085] hub 3-0:1.0: 2 ports detected
[    0.608071] hub 4-0:1.0: USB hub found
[    0.608083] hub 4-0:1.0: 2 ports detected
[    0.608197] ata_piix 0000:00:1f.2: version 2.13
[    0.608297] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.609127] scsi0 : ata_piix
[    0.609325] scsi1 : ata_piix
[    0.609382] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.609384] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.772237] ata1.00: HPA detected: current 1953523055, native 1953525168
[    0.772243] ata1.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133
[    0.772245] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.780233] ata1.00: configured for UDMA/133
[    0.780338] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZRX-00L 1A01 PQ: 0 ANSI: 5
[    0.788297] ata2.01: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS04, max UDMA/33
[    0.820176] ata2.01: configured for UDMA/33
[    0.821004] scsi 1:0:1:0: CD-ROM            TSSTcorp DVD-ROM SH-D162C TS04 PQ: 0 ANSI: 5
[    0.836778] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    0.836781] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.836947] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    0.837378] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    0.837416] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    0.853142] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[    0.853145] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.853201] sd 0:0:0:0: [sda] Write Protect is off
[    0.853204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.853225] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.939759]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    0.940274] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.340020] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    1.436016] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[    1.513036] usb 3-1: New USB device found, idVendor=058f, idProduct=9254
[    1.513041] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.513044] usb 3-1: Product: Generic USB Hub
[    1.513046] usb 3-1: Manufacturer: ALCOR
[    1.516089] hub 3-1:1.0: USB hub found
[    1.518033] hub 3-1:1.0: 4 ports detected
[    1.556843] PM: Starting manual resume from disk
[    1.556847] PM: Hibernation image partition 8:3 present
[    1.556848] PM: Looking for hibernation image.
[    1.557032] PM: Image not found (code -22)
[    1.557034] PM: Hibernation image not present or could not be loaded.
[    1.770754] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.800031] usb 3-1.1: new full-speed USB device number 3 using uhci_hcd
[    1.933035] usb 3-1.1: New USB device found, idVendor=045e, idProduct=0745
[    1.933040] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.933042] usb 3-1.1: Product: Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0
[    1.933045] usb 3-1.1: Manufacturer: Microsoft
[    2.008013] usb 3-1.3: new low-speed USB device number 4 using uhci_hcd
[    2.155035] usb 3-1.3: New USB device found, idVendor=10d5, idProduct=55a2
[    2.155039] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.155042] usb 3-1.3: Product: 2Port KVMSwicther
[    2.155044] usb 3-1.3: Manufacturer: No brand
[    2.155046] usb 3-1.3: SerialNumber: 0\xffffffc2\xffffff92
[    2.429447] random: nonblocking pool is initialized
[    2.436087] Switched to clocksource tsc
[    2.560034] systemd-udevd[252]: starting version 215
[    4.235515] Adding 3906556k swap on /dev/sda3.  Priority:-1 extents:1 across:3906556k FS
[    4.248161] EXT4-fs (sda2): re-mounted. Opts: (null)
[    4.327866] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    6.217766] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.242798] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.273078] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    6.300468] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    6.308534] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   14.909309] r8169 0000:03:00.0 eth0: link down
[   14.909326] r8169 0000:03:00.0 eth0: link down
[   14.909376] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.913395] eth1:  setting full-duplex.
[   15.247449] systemd-logind[2037]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   15.247517] systemd-logind[2037]: Failed to fully start up daemon: Input/output error



je n'arrive pas a trouver le log pour montrer cette erreur

Dernière modification par Herbert west (13-03-2017 11:31:00)


[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

#2 09-03-2017 11:20:44

anonyme
Invité

Re : smp boot cpu not responding [RESOLU]

Bonjour
je suis en stretch , quad core q6600 et q9550 j'ai pas ce problème.
pour récupérer l erreur voir peut etre le wiki systemd pour le journal

j'utilise celle ci mais ne prend que les erreurs depuis le dernier démarrage


journalctl -r -p err
 



le wiki  =>  https://debian-facile.org/doc:system:systemd

peut etre une commande qui te permettra de trouver l erreur

Dernière modification par anonyme (09-03-2017 11:24:48)

#3 09-03-2017 12:21:40

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

Re : smp boot cpu not responding [RESOLU]

journalctl -r -p err
-- Logs begin at jeu. 2017-03-09 12:06:52 CET, end at jeu. 2017-03-09 12:09:05 CET. --
mars 09 12:07:08 debianj dhclient[973]: [37B blob data]
mars 09 12:07:08 debianj dhclient[973]: [37B blob data]
mars 09 12:07:08 debianj dhclient[975]: exiting.
mars 09 12:07:08 debianj dhclient[975]:
mars 09 12:07:08 debianj dhclient[975]: process and the information we find helpful for debugging..
mars 09 12:07:08 debianj dhclient[975]: before submitting a bug.  These pages explain the proper
mars 09 12:07:08 debianj dhclient[975]: bugs on either our web page at www.isc.org or in the README fil
mars 09 12:07:08 debianj dhclient[975]: than a configuration issue please read the section on submittin
mars 09 12:07:08 debianj dhclient[975]: If you think you have received this message due to a bug rather
mars 09 12:07:08 debianj dhclient[975]:
lines 1-11...skipping...
-- Logs begin at jeu. 2017-03-09 12:06:52 CET, end at jeu. 2017-03-09 12:09:05 CET. --
mars 09 12:07:08 debianj dhclient[973]: [37B blob data]
mars 09 12:07:08 debianj dhclient[973]: [37B blob data]
mars 09 12:07:08 debianj dhclient[975]: exiting.
mars 09 12:07:08 debianj dhclient[975]:
mars 09 12:07:08 debianj dhclient[975]: process and the information we find helpful for debugging..
mars 09 12:07:08 debianj dhclient[975]: before submitting a bug.  These pages explain the proper
mars 09 12:07:08 debianj dhclient[975]: bugs on either our web page at www.isc.org or in the README file
mars 09 12:07:08 debianj dhclient[975]: than a configuration issue please read the section on submitting
mars 09 12:07:08 debianj dhclient[975]: If you think you have received this message due to a bug rather
mars 09 12:07:08 debianj dhclient[975]:
mars 09 12:07:08 debianj dhclient[975]: includes a bootp server.
mars 09 12:07:08 debianj dhclient[975]: are not running HP JetAdmin software, which
mars 09 12:07:08 debianj dhclient[975]: bootp in /etc/inetd.conf.   Also make sure you
mars 09 12:07:08 debianj dhclient[975]: running and that there's no entry for dhcp or
mars 09 12:07:08 debianj dhclient[975]: Please make sure there is no other dhcp server
mars 09 12:07:08 debianj dhclient[975]: Can'
t bind to dhcp address: Cannot assign requested address
mars 09 12:07:06 debianj colord-sane[966]: io/hpmud/pp.c 627: unable to read device-id ret=-1
mars 09 12:06:59 debianj minissdpd[655]: setsockopt(udp, IP_ADD_MEMBERSHIP)(0.0.0.0): No such device
mars 09 12:06:55 debianj kernel: usbhid 3-1.3:1.1: couldn't find an input interrupt endpoint



donc non je n'ai pas trouvé
dhcclient : apparemment j'ai un probleme de doublon dhcp: peut etre entre mon imprimante et mon debian . mon ordi est geré par dhcp  ; il n'y pas si longtemps j'ai mis mon imprimante en ethernet ou j'ai activé dans son panneau dhcp/boot (sinon ça marchait pas) . du coup le probleme ou mon imprimante se freeze des que j'essaye d'imprimer une page internet vient peut etre de la .

colord-sane c'est apparemment un bug de colord qui servirait a calibrer l'ecran . il existe une solution pour le mettre en false afin que le demon ne tourne pas sans cesse

minissdpd apparemment lerreur viendrait d'un driver d'un matos usb???
mais en aucune façon j'arrive a trouver mon message d'erreur sur les cpu

Dernière modification par Herbert west (09-03-2017 15:10:46)


[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

#4 09-03-2017 15:37:11

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

Re : smp boot cpu not responding [RESOLU]

le seul truc qui ne m'aide pas c'est ça:

dmesg | grep cpu
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s80960 r8192 d21440 u524288
[    0.000000] pcpu-alloc: s80960 r8192 d21440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.112041] cpuidle: using governor ladder
[    0.112044] cpuidle: using governor menu
[    0.146370] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.463662] ledtrig-cpu: registered to indicate activity on CPUs


et

dmesg | grep smpboot
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.063679] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz (fam: 06, model: 17, stepping: 0a)
[    0.100014] smpboot: Total of 4 processors activated (21335.39 BogoMIPS)



mais je ne vois pas de problemes


[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

#5 09-03-2017 16:32:11

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

Re : smp boot cpu not responding [RESOLU]

je comprends pas , ce n'est pas sur le journal de midi ,mais sur celui de 9h00
donc merci pur le lien robert:

 


journalctl --since="2017-03-08 23:00:00" --until="2017-03-09 10:00:00"
-- Logs begin at jeu. 2017-03-09 12:06:52 CET, end at jeu. 2017-03-09 16:22:57 CET. --
 



il ne veut pas me donner le boot de 9h12 et je ne sais pas pourquoi

ce matin , j'arrive  a la mega bourre (bonne session rainbow six avec des potes hier soir)
j'allume l'ordi : hop !j'ai ce probleme qui s'affiche : peut etre c'est un probleme du bios ??
apres ce message l'ordi redemarre correctement
je mets a jour
je redemarre
bref j'ai redemarré 3 ou 4 fois

donc peut etre que ce soucis vient du bios puis que je ne trouve pas le journal correspondant .
mais j'aimerais savoir pourquoi je ne trouve pas ce journal


[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

#6 09-03-2017 16:40:28

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

Re : smp boot cpu not responding [RESOLU]

apparemment fedora a eu le meme probleme sur le kenel 4.3 avec ce type de processeur https://bugzilla.redhat.com/show_bug.cgi?id=1101344

je viens d'avoir une nouvelle mise a jour linux image , peut etre corrige t elle mon probleme : vu que les deux mises a jour sont tres proche !!!

je vous tiens au jus

Dernière modification par Herbert west (09-03-2017 16:46:40)


[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

#7 09-03-2017 18:23:47

anonyme
Invité

Re : smp boot cpu not responding [RESOLU]

Bonsoir
pour l imprimante soit tu met une IP réservé sur ta box  (si c'est possible ) sur le dhcp , soit une IP fixe en dehors des IP du dhcp.
une IP utilisé 2 fois (2 clients IP identique ) c'est pas bon du tout
tu devrais commencer résoudre ce souci avant d'aller plus loin .

nota : tu n'a pas d erreur sur le cpu

Dernière modification par anonyme (09-03-2017 18:26:15)

#8 10-03-2017 08:41:55

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

Re : smp boot cpu not responding [RESOLU]

anonyme a écrit :

Bonsoir
pour l imprimante soit tu met une IP réservé sur ta box  (si c'est possible ) sur le dhcp , soit une IP fixe en dehors des IP du dhcp.
une IP utilisé 2 fois (2 clients IP identique ) c'est pas bon du tout
tu devrais commencer résoudre ce souci avant d'aller plus loin .

nota : tu n'a pas d erreur sur le cpu



merci robert
oui le log de cpu n'est pas le bon ,comme je disais plus haut ; c'est le log de 9h00 qu'il me fallait

aujourd'hui aucun message d'erreur ; je pense que c'est un bug corrigé par la mise a jour linux image d'hier

j'attends 1 semaine , si rien ne revient je mettrai resolu


[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

#9 10-03-2017 08:44:57

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

Re : smp boot cpu not responding [RESOLU]

pour l'imprimante , j'ai deja réservé une ip sur la box; y a un truc que j'ai mal fait quelque part mais la je suis hors sujet

[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

#10 13-03-2017 11:30:05

Herbert west
Membre
Distrib. : stable 64 mise a jour regulièrement
Noyau : mise a jour toutes les semaines :amd64
(G)UI : gnome 3
Inscription : 17-05-2012

Re : smp boot cpu not responding [RESOLU]

bon ben ça devait etre un bug present sur la mise a jour precedente ; depuis la nouvelle mise a jour du noyau ,je n'ai plus ces messages d'erreur
donc resolu

[I72600k / radeonhd 6870 /asus p8p67 pro b3/syncmaster 3D Samsung 23p displayport ]
[ hp spectre x360 i5 ] / [ raspbery pi 1.2 ] / [ 2 fixes core 2duo de recup ]
" Y a t il un sous-sol dans votre appartement ? "

Hors ligne

Pied de page des forums