Bonjour,
Sur un ordinateur portable avec une installation toute fraîche de DFLinux, il semble impossible de graver un DVD (pour un fichier texte, seul le label du disque et le nom du fichier apparaissent ; le fichier reste vide). Le problème de gravure m'a été signalé par les propriétaires de cet ordinateur, lorsque ce dernier était encore sous Ubuntu (il avait bien d'autres problèmes).
Avant de venir sur le forum, je suis passé par IRC. J'ai testé avec 2 DVD-RW via Xfburn (les propriétaires ont essayé avec plusieurs CD-R.
Avec le lecteur graveur vide, voici ce que j'obtiens avec la commande ci-dessous :
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 232,9G 0 disk
├─sda1 8:1 0 23,3G 0 part /
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 204G 0 part /home
└─sda6 8:6 0 5,7G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
J'ai aussi tenté de graver en ligne de commande avec Wodim (voir les 3 commandes) :
~$ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
~$ wodim -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
~$ wodim dev=help
Supported SCSI transports for this platform:
Transport name: sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example: ATAPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example: REMOTE:rscsi@host:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Ceci, sera peut-être également utile :
~$ cat /etc/mtab
rootfs / rootfs rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,relatime,size=10240k,nr_inodes=383955,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,relatime,size=618492k,mode=755 0 0
/dev/sda1 / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
tmpfs /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
tmpfs /etc/machine-id tmpfs ro,relatime,size=618492k,mode=755 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=22,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
/dev/sda5 /home xfs rw,relatime,attr2,inode64,noquota 0 0
tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=309248k,mode=700,uid=1000,gid=1000 0 0
gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0
Enfin, je précise que le lecteur a été utilisé pour l'installation de DFLinux, sans problème (le LiveDVD a cependant été gravé avec xfburn depuis mon PC personnel).
Avec votre aide, j'espère pouvoir :
- soit résoudre le problème
- soit savoir avec certitude que le graveur est mort ou inutilisable et leur conseiller d'aller acheter un graveur externe si c'est vraiment utile.
Merci d'avance pour l'attention que vous porterez à mon problème !
EDIT : J'ajoute fstab :
~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=eb837c5b-b7a1-4df8-8c51-d93e93284fd9 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=e5532a7d-79f2-48dd-a3bc-8a4a9b50e6ea /home xfs defaults 0 2
# swap was on /dev/sda6 during installation
UUID=fa98d4a9-7200-4d3c-8493-fabb8e2ee2c5 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Edit à toto :
Utilisation correcte des balises en exemple visible par Modifier au bas du post :
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 232,9G 0 disk
├─sda1 8:1 0 23,3G 0 part /
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 204G 0 part /home
└─sda6 8:6 0 5,7G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
Supported SCSI transports for this platform:
Transport name: sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example: ATAPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example: REMOTE:rscsi@host:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
rootfs / rootfs rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,relatime,size=10240k,nr_inodes=383955,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,relatime,size=618492k,mode=755 0 0
/dev/sda1 / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
tmpfs /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
tmpfs /etc/machine-id tmpfs ro,relatime,size=618492k,mode=755 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=22,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
/dev/sda5 /home xfs rw,relatime,attr2,inode64,noquota 0 0
tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=309248k,mode=700,uid=1000,gid=1000 0 0
gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=eb837c5b-b7a1-4df8-8c51-d93e93284fd9 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=e5532a7d-79f2-48dd-a3bc-8a4a9b50e6ea /home xfs defaults 0 2
# swap was on /dev/sda6 during installation
UUID=fa98d4a9-7200-4d3c-8493-fabb8e2ee2c5 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
Dernière modification par M. Burns (30-03-2017 18:06:24)