Hello, je viens de changer d'ordi pour remettre ma debian Librazik basée sur debian 8. Pendant l'installation la clef usb wifi est reconnue et internet fonctionne.
Une fois l'installation faite la clef scanne ma box, je rentre la clef de sécurité en la visualisant et là ça tourne dans le vide (???). Cette clef a toujours fonctionné automatiquement même avec des distribution comme slitaz et consor. Elle a fonctionné sur cette ordi avec mint et librazik en virtualbox.
Du coup un petit tour du côté de synaptic et là impossible d'accéder au dépôt main et non-free (???)
root@LibraZiK-studio-audio:/home/nicolasmao2# lsmod
Module Size Used by
nls_ascii 16384 0
nls_cp437 20480 0
vfat 20480 0
fat 69632 1 vfat
ctr 16384 2
ccm 20480 1
snd_hrtimer 16384 1
snd_seq 65536 1
snd_seq_device 16384 1 snd_seq
cpufreq_conservative 16384 0
cpufreq_userspace 16384 0
cpufreq_powersave 16384 0
binfmt_misc 20480 1
arc4 16384 2
rt73usb 36864 0
rt2x00usb 24576 1 rt73usb
rt2x00lib 53248 2 rt73usb,rt2x00usb
mac80211 671744 2 rt2x00lib,rt2x00usb
cfg80211 598016 2 rt2x00lib,mac80211
intel_rapl 20480 0
rfkill 24576 3 cfg80211
x86_pkg_temp_thermal 16384 0
crc_itu_t 16384 1 rt73usb
intel_powerclamp 16384 0
coretemp 16384 0
kvm_intel 192512 0
kvm 589824 1 kvm_intel
snd_hda_codec_hdmi 49152 1
irqbypass 16384 1 kvm
crct10dif_pclmul 16384 0
snd_hda_codec_realtek 90112 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
snd_hda_intel 36864 0
intel_cstate 16384 0
intel_uncore 122880 0
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
iTCO_wdt 16384 0
iTCO_vendor_support 16384 1 iTCO_wdt
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 16384 1 snd_hda_codec
intel_rapl_perf 16384 0
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
evdev 24576 19
snd_timer 32768 3 snd_seq,snd_hrtimer,snd_pcm
dcdbas 16384 0
snd 86016 11 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
soundcore 16384 1 snd
shpchp 36864 0
i915 1241088 3
sg 32768 0
drm_kms_helper 155648 1 i915
drm 360448 4 i915,drm_kms_helper
lpc_ich 24576 0
mfd_core 16384 1 lpc_ich
serio_raw 16384 0
tpm_tis 16384 0
tpm_tis_core 20480 1 tpm_tis
video 40960 1 i915
i2c_algo_bit 16384 1 i915
tpm 45056 2 tpm_tis,tpm_tis_core
mei_me 36864 0
mei 102400 1 mei_me
i2c_i801 24576 0
i2c_smbus 16384 1 i2c_i801
button 16384 1 i915
fuse 98304 1
parport_pc 28672 1
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
autofs4 40960 2
uas 24576 0
usb_storage 73728 1 uas
ext4 593920 1
crc16 16384 1 ext4
jbd2 106496 1 ext4
fscrypto 28672 1 ext4
mbcache 16384 2 ext4
btrfs 1056768 0
xor 24576 1 btrfs
hid_generic 16384 0
usbhid 53248 0
hid 118784 2 hid_generic,usbhid
raid6_pq 110592 1 btrfs
dm_mod 118784 0
sr_mod 24576 0
sd_mod 49152 3
cdrom 61440 1 sr_mod
crc32c_intel 24576 1
aesni_intel 167936 3
aes_x86_64 20480 1 aesni_intel
glue_helper 16384 1 aesni_intel
lrw 16384 1 aesni_intel
gf128mul 16384 1 lrw
ablk_helper 16384 1 aesni_intel
psmouse 135168 0
cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
ahci 36864 2
libahci 32768 1 ahci
libata 249856 2 ahci,libahci
ehci_pci 16384 0
ehci_hcd 81920 1 ehci_pci
usbcore 249856 7 usbhid,rt73usb,usb_storage,rt2x00usb,ehci_hcd,uas,ehci_pci
e1000e 245760 0
scsi_mod 225280 6 sd_mod,usb_storage,libata,uas,sr_mod,sg
usb_common 16384 1 usbcore
ptp 20480 1 e1000e
pps_core 16384 1 ptp
fjes 28672 0
root@LibraZiK-studio-audio:/home/nicolasmao2#
[ 0.362297] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.362298] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.362299] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
[ 0.362300] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.362724] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.362767] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.362808] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.362848] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.362888] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.362928] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.362968] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.363007] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.363068] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.363182] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.363183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363184] vgaarb: loaded
[ 0.363185] vgaarb: bridge control possible 0000:00:02.0
[ 0.363242] PCI: Using ACPI for IRQ routing
[ 0.364664] PCI: pci_cache_line_size set to 64 bytes
[ 0.364696] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[ 0.364697] e820: reserve RAM buffer [mem 0xca9fa000-0xcbffffff]
[ 0.364698] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[ 0.364699] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.364700] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[ 0.364827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.364830] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.366851] clocksource: Switched to clocksource hpet
[ 0.371824] VFS: Disk quotas dquot_6.6.0
[ 0.371854] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.371926] pnp: PnP ACPI init
[ 0.372053] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.372055] system 00:00: [io 0xffff] has been reserved
[ 0.372056] system 00:00: [io 0xffff] has been reserved
[ 0.372057] system 00:00: [io 0xffff] has been reserved
[ 0.372058] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.372059] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.372060] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.372061] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.372064] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372087] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.372125] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.372127] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.372204] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.372386] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.372540] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.372541] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.372542] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.372543] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.372544] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.372545] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.372546] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.372547] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.372549] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.372550] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.372551] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372586] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.372587] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[ 0.372588] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.372669] pnp: PnP ACPI: found 7 devices
[ 0.378667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.378703] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.378720] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.378723] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.378729] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff]
[ 0.378733] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.378741] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.378751] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.378752] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.378753] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.378754] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.378754] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.378756] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.378757] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
[ 0.378757] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.378758] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.378759] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.378760] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.378761] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.378762] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.378839] NET: Registered protocol family 2
[ 0.379003] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.379057] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.379121] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.379137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.379147] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.379201] NET: Registered protocol family 1
[ 0.379218] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.379538] PCI: CLS 64 bytes, default 64
[ 0.379574] Unpacking initramfs...
[ 0.675880] Freeing initrd memory: 21900K (ffff88e43552a000 - ffff88e436a8d000)
[ 0.675983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.675985] software IO TLB [mem 0xc69fa000-0xca9fa000] (64MB) mapped at [ffff88e4c69fa000-ffff88e4ca9f9fff]
[ 0.676389] audit: initializing netlink subsys (disabled)
[ 0.676404] audit: type=2000 audit(1492176768.680:1): initialized
[ 0.676645] Initialise system trusted keyrings
[ 0.676729] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.676760] zbud: loaded
[ 0.714889] Key type asymmetric registered
[ 0.714890] Asymmetric key parser 'x509' registered
[ 0.714904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.714925] io scheduler noop registered
[ 0.714926] io scheduler deadline registered
[ 0.714936] io scheduler cfq registered (default)
[ 0.715291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.715294] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.715303] intel_idle: MWAIT substates: 0x1120
[ 0.715304] intel_idle: v0.4.1 model 0x2A
[ 0.715414] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.715570] GHES: HEST is not enabled!
[ 0.715612] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.736116] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.736543] Linux agpgart interface v0.103
[ 0.736575] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.736575] AMD IOMMUv2 functionality not available on this system
[ 0.736906] i8042: PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
[ 0.736906] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.739743] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.739745] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.739900] mousedev: PS/2 mouse device common for all mice
[ 0.739934] rtc_cmos 00:01: RTC can wake from S4
[ 0.740054] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.740123] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.740132] intel_pstate: Intel P-state driver initializing
[ 0.740310] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.741138] NET: Registered protocol family 10
[ 0.741477] mip6: Mobile IPv6
[ 0.741480] NET: Registered protocol family 17
[ 0.741482] mpls_gso: MPLS GSO support
[ 0.741750] microcode: sig=0x206a7, pf=0x2, revision=0x29
[ 0.741837] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.742032] registered taskstats version 1
[ 0.742034] Loading compiled-in X.509 certificates
[ 0.744270] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.744739] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.744766] zswap: loaded using pool lzo/zbud
[ 0.745163] rtc_cmos 00:01: setting system clock to 2017-04-14 13:32:48 UTC (1492176768)
[ 0.745246] PM: Hibernation image not present or could not be loaded.
[ 0.747184] Freeing unused kernel memory: 1396K (ffffffffbd52d000 - ffffffffbd68a000)
[ 0.747185] Write protecting the kernel read-only data: 12288k
[ 0.747984] Freeing unused kernel memory: 2032K (ffff88e43be04000 - ffff88e43c000000)
[ 0.752505] Freeing unused kernel memory: 1244K (ffff88e43c2c9000 - ffff88e43c400000)
[ 0.762929] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.776608] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.776698] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.776711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.777580] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.777626] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779104] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779126] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779188] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779553] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779631] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.803209] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.812269] pps_core: LinuxPPS API ver. 1 registered
[ 0.812270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.813082] PTP clock support registered
[ 0.818365] SCSI subsystem initialized
[ 0.818467] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.818468] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.818680] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.819684] ACPI: bus type USB registered
[ 0.819705] usbcore: registered new interface driver usbfs
[ 0.819715] usbcore: registered new interface driver hub
[ 0.819738] usbcore: registered new device driver usb
[ 0.821625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.822223] ehci-pci: EHCI PCI platform driver
[ 0.829659] libata version 3.00 loaded.
[ 0.842259] AVX version of gcm_enc/dec engaged.
[ 0.842260] AES CTR mode by8 optimization enabled
[ 0.963272] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.084907] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:dc:f6:7c
[ 1.084909] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.084950] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
[ 1.085178] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.085184] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.085196] ehci-pci 0000:00:1a.0: debug port 2
[ 1.086579] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.089088] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.089262] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000
[ 1.102918] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.102978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.102979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.102981] usb usb1: Product: EHCI Host Controller
[ 1.102982] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[ 1.102983] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.103233] hub 1-0:1.0: USB hub found
[ 1.103242] hub 1-0:1.0: 2 ports detected
[ 1.103499] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.103504] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.103516] ehci-pci 0000:00:1d.0: debug port 2
[ 1.107429] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.107493] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000
[ 1.122915] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.123288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.123291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.123293] usb usb2: Product: EHCI Host Controller
[ 1.123295] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[ 1.123296] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.123622] hub 2-0:1.0: USB hub found
[ 1.123664] hub 2-0:1.0: 2 ports detected
[ 1.124067] ahci 0000:00:1f.2: version 3.0
[ 1.124286] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.124288] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.135709] scsi host0: ahci
[ 1.136013] scsi host1: ahci
[ 1.136277] scsi host2: ahci
[ 1.136396] scsi host3: ahci
[ 1.136500] scsi host4: ahci
[ 1.136591] scsi host5: ahci
[ 1.136642] ata1: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40100 irq 27
[ 1.136644] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 27
[ 1.136645] ata3: DUMMY
[ 1.136646] ata4: DUMMY
[ 1.136646] ata5: DUMMY
[ 1.136647] ata6: DUMMY
[ 1.430903] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.449956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.449978] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.450590] ata2.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D200, max UDMA/100
[ 1.450593] ata2.00: applying bridge limits
[ 1.450895] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.451555] ata2.00: configured for UDMA/100
[ 1.451693] ata1.00: ATA-8: WDC WD5000AAKX-753CA1, 19.01H19, max UDMA/133
[ 1.451695] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.454463] ata1.00: configured for UDMA/133
[ 1.454850] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-7 1H19 PQ: 0 ANSI: 5
[ 1.504191] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW SH-216AB D200 PQ: 0 ANSI: 5
[ 1.524405] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.524455] sd 0:0:0:0: [sda] Write Protect is off
[ 1.524458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.524480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.537333] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.537335] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.537566] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.540508] sda: sda1 sda2 < sda5 sda6 >
[ 1.541401] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.583269] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.583272] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.583647] hub 1-1:1.0: USB hub found
[ 1.583864] hub 1-1:1.0: 6 ports detected
[ 1.603255] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.603257] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.603501] hub 2-1:1.0: USB hub found
[ 1.603584] hub 2-1:1.0: 8 ports detected
[ 1.686932] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[ 1.686940] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns
[ 1.788401] random: fast init done
[ 1.874863] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.890890] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[ 1.891844] device-mapper: uevent: version 1.0.3
[ 1.891955] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.966860] raid6: sse2x1 gen() 5918 MB/s
[ 2.004852] usb 2-1.6: New USB device found, idVendor=0603, idProduct=00f2
[ 2.004853] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.004854] usb 2-1.6: Product: USB Keyboard
[ 2.004855] usb 2-1.6: Manufacturer: NOVATEK
[ 2.009033] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.016211] usbcore: registered new interface driver usbhid
[ 2.016212] usbhid: USB HID core driver
[ 2.017577] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0603:00F2.0001/input/input3
[ 2.034855] raid6: sse2x1 xor() 6080 MB/s
[ 2.075052] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 2.076765] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0603:00F2.0002/input/input4
[ 2.082864] usb 2-1.7: new low-speed USB device number 4 using ehci-pci
[ 2.102852] raid6: sse2x2 gen() 11059 MB/s
[ 2.122472] usb 1-1.4: New USB device found, idVendor=06f8, idProduct=e010
[ 2.122473] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.122474] usb 1-1.4: Product: 802.11 bg WLAN
[ 2.122475] usb 1-1.4: Manufacturer: Ralink
[ 2.135130] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[ 2.170861] raid6: sse2x2 xor() 8025 MB/s
[ 2.196597] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c03e
[ 2.196599] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.196600] usb 2-1.7: Product: USB-PS/2 Optical Mouse
[ 2.196600] usb 2-1.7: Manufacturer: Logitech
[ 2.199994] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C03E.0003/input/input5
[ 2.200149] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[ 2.238854] raid6: sse2x4 gen() 12911 MB/s
[ 2.278864] usb 2-1.8: new high-speed USB device number 5 using ehci-pci
[ 2.306851] raid6: sse2x4 xor() 9939 MB/s
[ 2.306852] raid6: using algorithm sse2x4 gen() 12911 MB/s
[ 2.306852] raid6: .... xor() 9939 MB/s, rmw enabled
[ 2.306853] raid6: using ssse3x2 recovery algorithm
[ 2.307965] xor: automatically using best checksumming function avx
[ 2.328854] Btrfs loaded, crc32c=crc32c-intel
[ 2.386875] PM: Starting manual resume from disk
[ 2.386889] PM: Hibernation image partition 8:5 present
[ 2.386890] PM: Looking for hibernation image.
[ 2.387152] PM: Image not found (code -22)
[ 2.387153] PM: Hibernation image not present or could not be loaded.
[ 2.441027] usb 2-1.8: New USB device found, idVendor=0951, idProduct=1666
[ 2.441037] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.441039] usb 2-1.8: Product: DataTraveler 3.0
[ 2.441040] usb 2-1.8: Manufacturer: Kingston
[ 2.441041] usb 2-1.8: SerialNumber: 08606E6D4080BE90270D94D5
[ 2.446573] usb-storage 2-1.8:1.0: USB Mass Storage device detected
[ 2.446682] scsi host6: usb-storage 2-1.8:1.0
[ 2.446761] usbcore: registered new interface driver usb-storage
[ 2.447894] usbcore: registered new interface driver uas
[ 2.513646] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.711033] clocksource: Switched to clocksource tsc
[ 3.506692] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 3.580410] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 3.638024] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.638229] systemd[1]: Detected architecture x86-64.
[ 3.649336] systemd[1]: Set hostname to <LibraZiK-studio-audio>.
[ 3.974738] sd 6:0:0:0: [sdb] 61472768 512-byte logical blocks: (31.5 GB/29.3 GiB)
[ 3.977059] sd 6:0:0:0: [sdb] Write Protect is off
[ 3.977062] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.979292] sd 6:0:0:0: [sdb] No Caching mode page found
[ 3.979344] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.093948] sdb: sdb1 sdb4
[ 4.100573] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.432315] random: crng init done
[ 4.477106] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.477202] systemd[1]: Listening on udev Control Socket.
[ 4.477244] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.477366] systemd[1]: Created slice System Slice.
[ 4.477417] systemd[1]: Listening on Journal Socket.
[ 4.524902] systemd[1]: Starting Load Kernel Modules...
[ 4.524934] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.033600] lp: driver loaded but no devices found
[ 5.126244] ppdev: user-space parallel port driver
[ 5.154100] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 5.287035] parport0: irq 7 detected
[ 5.383064] lp0: using parport0 (polling).
[ 5.473897] fuse init (API version 7.26)
[ 7.369416] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.408458] systemd-journald[723]: Received request to flush runtime journal from PID 1
[ 7.611510] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 7.611514] ACPI: Power Button [PWRB]
[ 7.611548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 7.611549] ACPI: Power Button [PWRF]
[ 7.629771] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.743165] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[ 7.743170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743172] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.743174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743175] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.743177] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743177] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.743179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743179] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.782325] [drm] Initialized
[ 7.815185] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.815209] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.815232] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.869400] [drm] Memory usable by graphics device = 2048M
[ 7.869401] [drm] Replacing VGA console driver
[ 7.869902] Console: switching to colour dummy device 80x25
[ 7.877128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.877129] [drm] Driver supports precise vblank timestamp query.
[ 7.879760] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.883520] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.883724] acpi device:01: registered as cooling_device4
[ 7.883795] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 7.883821] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 7.883843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.909827] fbcon: inteldrmfb (fb0) is primary device
[ 7.953327] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.975972] Console: switching to colour frame buffer device 160x64
[ 7.996129] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.099709] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 8.099711] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 8.099712] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 8.099713] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 8.120038] iTCO_vendor_support: vendor-support=0
[ 8.133763] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11[ 0.362297] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.362298] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.362299] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
[ 0.362300] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.362724] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.362767] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.362808] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.362848] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.362888] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.362928] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.362968] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.363007] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.363068] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.363182] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.363183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363184] vgaarb: loaded
[ 0.363185] vgaarb: bridge control possible 0000:00:02.0
[ 0.363242] PCI: Using ACPI for IRQ routing
[ 0.364664] PCI: pci_cache_line_size set to 64 bytes
[ 0.364696] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[ 0.364697] e820: reserve RAM buffer [mem 0xca9fa000-0xcbffffff]
[ 0.364698] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[ 0.364699] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.364700] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[ 0.364827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.364830] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.366851] clocksource: Switched to clocksource hpet
[ 0.371824] VFS: Disk quotas dquot_6.6.0
[ 0.371854] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.371926] pnp: PnP ACPI init
[ 0.372053] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.372055] system 00:00: [io 0xffff] has been reserved
[ 0.372056] system 00:00: [io 0xffff] has been reserved
[ 0.372057] system 00:00: [io 0xffff] has been reserved
[ 0.372058] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.372059] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.372060] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.372061] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.372064] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372087] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.372125] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.372127] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.372204] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.372386] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.372540] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.372541] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.372542] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.372543] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.372544] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.372545] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.372546] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.372547] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.372549] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.372550] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.372551] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372586] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.372587] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[ 0.372588] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.372669] pnp: PnP ACPI: found 7 devices
[ 0.378667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.378703] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.378720] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.378723] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.378729] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff]
[ 0.378733] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.378741] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.378751] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.378752] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.378753] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.378754] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.378754] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.378756] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.378757] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
[ 0.378757] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.378758] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.378759] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.378760] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.378761] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.378762] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.378839] NET: Registered protocol family 2
[ 0.379003] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.379057] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.379121] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.379137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.379147] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.379201] NET: Registered protocol family 1
[ 0.379218] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.379538] PCI: CLS 64 bytes, default 64
[ 0.379574] Unpacking initramfs...
[ 0.675880] Freeing initrd memory: 21900K (ffff88e43552a000 - ffff88e436a8d000)
[ 0.675983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.675985] software IO TLB [mem 0xc69fa000-0xca9fa000] (64MB) mapped at [ffff88e4c69fa000-ffff88e4ca9f9fff]
[ 0.676389] audit: initializing netlink subsys (disabled)
[ 0.676404] audit: type=2000 audit(1492176768.680:1): initialized
[ 0.676645] Initialise system trusted keyrings
[ 0.676729] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.676760] zbud: loaded
[ 0.714889] Key type asymmetric registered
[ 0.714890] Asymmetric key parser 'x509' registered
[ 0.714904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.714925] io scheduler noop registered
[ 0.714926] io scheduler deadline registered
[ 0.714936] io scheduler cfq registered (default)
[ 0.715291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.715294] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.715303] intel_idle: MWAIT substates: 0x1120
[ 0.715304] intel_idle: v0.4.1 model 0x2A
[ 0.715414] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.715570] GHES: HEST is not enabled!
[ 0.715612] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.736116] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.736543] Linux agpgart interface v0.103
[ 0.736575] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.736575] AMD IOMMUv2 functionality not available on this system
[ 0.736906] i8042: PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
[ 0.736906] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.739743] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.739745] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.739900] mousedev: PS/2 mouse device common for all mice
[ 0.739934] rtc_cmos 00:01: RTC can wake from S4
[ 0.740054] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.740123] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.740132] intel_pstate: Intel P-state driver initializing
[ 0.740310] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.741138] NET: Registered protocol family 10
[ 0.741477] mip6: Mobile IPv6
[ 0.741480] NET: Registered protocol family 17
[ 0.741482] mpls_gso: MPLS GSO support
[ 0.741750] microcode: sig=0x206a7, pf=0x2, revision=0x29
[ 0.741837] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.742032] registered taskstats version 1
[ 0.742034] Loading compiled-in X.509 certificates
[ 0.744270] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.744739] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.744766] zswap: loaded using pool lzo/zbud
[ 0.745163] rtc_cmos 00:01: setting system clock to 2017-04-14 13:32:48 UTC (1492176768)
[ 0.745246] PM: Hibernation image not present or could not be loaded.
[ 0.747184] Freeing unused kernel memory: 1396K (ffffffffbd52d000 - ffffffffbd68a000)
[ 0.747185] Write protecting the kernel read-only data: 12288k
[ 0.747984] Freeing unused kernel memory: 2032K (ffff88e43be04000 - ffff88e43c000000)
[ 0.752505] Freeing unused kernel memory: 1244K (ffff88e43c2c9000 - ffff88e43c400000)
[ 0.762929] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.776608] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.776698] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.776711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.777580] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.777626] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779104] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779126] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779188] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779553] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.779631] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.803209] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.812269] pps_core: LinuxPPS API ver. 1 registered
[ 0.812270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.813082] PTP clock support registered
[ 0.818365] SCSI subsystem initialized
[ 0.818467] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.818468] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.818680] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.819684] ACPI: bus type USB registered
[ 0.819705] usbcore: registered new interface driver usbfs
[ 0.819715] usbcore: registered new interface driver hub
[ 0.819738] usbcore: registered new device driver usb
[ 0.821625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.822223] ehci-pci: EHCI PCI platform driver
[ 0.829659] libata version 3.00 loaded.
[ 0.842259] AVX version of gcm_enc/dec engaged.
[ 0.842260] AES CTR mode by8 optimization enabled
[ 0.963272] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.084907] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:dc:f6:7c
[ 1.084909] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.084950] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
[ 1.085178] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.085184] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.085196] ehci-pci 0000:00:1a.0: debug port 2
[ 1.086579] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.089088] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.089262] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000
[ 1.102918] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.102978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.102979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.102981] usb usb1: Product: EHCI Host Controller
[ 1.102982] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[ 1.102983] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.103233] hub 1-0:1.0: USB hub found
[ 1.103242] hub 1-0:1.0: 2 ports detected
[ 1.103499] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.103504] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.103516] ehci-pci 0000:00:1d.0: debug port 2
[ 1.107429] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.107493] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000
[ 1.122915] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.123288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.123291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.123293] usb usb2: Product: EHCI Host Controller
[ 1.123295] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[ 1.123296] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.123622] hub 2-0:1.0: USB hub found
[ 1.123664] hub 2-0:1.0: 2 ports detected
[ 1.124067] ahci 0000:00:1f.2: version 3.0
[ 1.124286] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.124288] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.135709] scsi host0: ahci
[ 1.136013] scsi host1: ahci
[ 1.136277] scsi host2: ahci
[ 1.136396] scsi host3: ahci
[ 1.136500] scsi host4: ahci
[ 1.136591] scsi host5: ahci
[ 1.136642] ata1: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40100 irq 27
[ 1.136644] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 27
[ 1.136645] ata3: DUMMY
[ 1.136646] ata4: DUMMY
[ 1.136646] ata5: DUMMY
[ 1.136647] ata6: DUMMY
[ 1.430903] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.449956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.449978] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.450590] ata2.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D200, max UDMA/100
[ 1.450593] ata2.00: applying bridge limits
[ 1.450895] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.451555] ata2.00: configured for UDMA/100
[ 1.451693] ata1.00: ATA-8: WDC WD5000AAKX-753CA1, 19.01H19, max UDMA/133
[ 1.451695] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.454463] ata1.00: configured for UDMA/133
[ 1.454850] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-7 1H19 PQ: 0 ANSI: 5
[ 1.504191] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW SH-216AB D200 PQ: 0 ANSI: 5
[ 1.524405] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.524455] sd 0:0:0:0: [sda] Write Protect is off
[ 1.524458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.524480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.537333] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.537335] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.537566] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.540508] sda: sda1 sda2 < sda5 sda6 >
[ 1.541401] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.583269] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.583272] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.583647] hub 1-1:1.0: USB hub found
[ 1.583864] hub 1-1:1.0: 6 ports detected
[ 1.603255] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.603257] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.603501] hub 2-1:1.0: USB hub found
[ 1.603584] hub 2-1:1.0: 8 ports detected
[ 1.686932] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[ 1.686940] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns
[ 1.788401] random: fast init done
[ 1.874863] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.890890] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[ 1.891844] device-mapper: uevent: version 1.0.3
[ 1.891955] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.966860] raid6: sse2x1 gen() 5918 MB/s
[ 2.004852] usb 2-1.6: New USB device found, idVendor=0603, idProduct=00f2
[ 2.004853] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.004854] usb 2-1.6: Product: USB Keyboard
[ 2.004855] usb 2-1.6: Manufacturer: NOVATEK
[ 2.009033] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.016211] usbcore: registered new interface driver usbhid
[ 2.016212] usbhid: USB HID core driver
[ 2.017577] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0603:00F2.0001/input/input3
[ 2.034855] raid6: sse2x1 xor() 6080 MB/s
[ 2.075052] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 2.076765] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0603:00F2.0002/input/input4
[ 2.082864] usb 2-1.7: new low-speed USB device number 4 using ehci-pci
[ 2.102852] raid6: sse2x2 gen() 11059 MB/s
[ 2.122472] usb 1-1.4: New USB device found, idVendor=06f8, idProduct=e010
[ 2.122473] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.122474] usb 1-1.4: Product: 802.11 bg WLAN
[ 2.122475] usb 1-1.4: Manufacturer: Ralink
[ 2.135130] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[ 2.170861] raid6: sse2x2 xor() 8025 MB/s
[ 2.196597] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c03e
[ 2.196599] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.196600] usb 2-1.7: Product: USB-PS/2 Optical Mouse
[ 2.196600] usb 2-1.7: Manufacturer: Logitech
[ 2.199994] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C03E.0003/input/input5
[ 2.200149] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[ 2.238854] raid6: sse2x4 gen() 12911 MB/s
[ 2.278864] usb 2-1.8: new high-speed USB device number 5 using ehci-pci
[ 2.306851] raid6: sse2x4 xor() 9939 MB/s
[ 2.306852] raid6: using algorithm sse2x4 gen() 12911 MB/s
[ 2.306852] raid6: .... xor() 9939 MB/s, rmw enabled
[ 2.306853] raid6: using ssse3x2 recovery algorithm
[ 2.307965] xor: automatically using best checksumming function avx
[ 2.328854] Btrfs loaded, crc32c=crc32c-intel
[ 2.386875] PM: Starting manual resume from disk
[ 2.386889] PM: Hibernation image partition 8:5 present
[ 2.386890] PM: Looking for hibernation image.
[ 2.387152] PM: Image not found (code -22)
[ 2.387153] PM: Hibernation image not present or could not be loaded.
[ 2.441027] usb 2-1.8: New USB device found, idVendor=0951, idProduct=1666
[ 2.441037] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.441039] usb 2-1.8: Product: DataTraveler 3.0
[ 2.441040] usb 2-1.8: Manufacturer: Kingston
[ 2.441041] usb 2-1.8: SerialNumber: 08606E6D4080BE90270D94D5
[ 2.446573] usb-storage 2-1.8:1.0: USB Mass Storage device detected
[ 2.446682] scsi host6: usb-storage 2-1.8:1.0
[ 2.446761] usbcore: registered new interface driver usb-storage
[ 2.447894] usbcore: registered new interface driver uas
[ 2.513646] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.711033] clocksource: Switched to clocksource tsc
[ 3.506692] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 3.580410] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 3.638024] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.638229] systemd[1]: Detected architecture x86-64.
[ 3.649336] systemd[1]: Set hostname to <LibraZiK-studio-audio>.
[ 3.974738] sd 6:0:0:0: [sdb] 61472768 512-byte logical blocks: (31.5 GB/29.3 GiB)
[ 3.977059] sd 6:0:0:0: [sdb] Write Protect is off
[ 3.977062] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.979292] sd 6:0:0:0: [sdb] No Caching mode page found
[ 3.979344] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.093948] sdb: sdb1 sdb4
[ 4.100573] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.432315] random: crng init done
[ 4.477106] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.477202] systemd[1]: Listening on udev Control Socket.
[ 4.477244] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.477366] systemd[1]: Created slice System Slice.
[ 4.477417] systemd[1]: Listening on Journal Socket.
[ 4.524902] systemd[1]: Starting Load Kernel Modules...
[ 4.524934] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.033600] lp: driver loaded but no devices found
[ 5.126244] ppdev: user-space parallel port driver
[ 5.154100] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 5.287035] parport0: irq 7 detected
[ 5.383064] lp0: using parport0 (polling).
[ 5.473897] fuse init (API version 7.26)
[ 7.369416] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.408458] systemd-journald[723]: Received request to flush runtime journal from PID 1
[ 7.611510] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 7.611514] ACPI: Power Button [PWRB]
[ 7.611548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 7.611549] ACPI: Power Button [PWRF]
[ 7.629771] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.743165] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[ 7.743170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743172] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.743174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743175] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.743177] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743177] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.743179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.743179] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.782325] [drm] Initialized
[ 7.815185] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.815209] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.815232] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.869400] [drm] Memory usable by graphics device = 2048M
[ 7.869401] [drm] Replacing VGA console driver
[ 7.869902] Console: switching to colour dummy device 80x25
[ 7.877128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.877129] [drm] Driver supports precise vblank timestamp query.
[ 7.879760] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.883520] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.883724] acpi device:01: registered as cooling_device4
[ 7.883795] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 7.883821] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 7.883843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.909827] fbcon: inteldrmfb (fb0) is primary device
[ 7.953327] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.975972] Console: switching to colour frame buffer device 160x64
[ 7.996129] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.099709] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 8.099711] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 8.099712] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 8.099713] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 8.120038] iTCO_vendor_support: vendor-support=0
[ 8.133763] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.133799] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.133893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.463403] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[ 8.463953] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 8.463955] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 8.463957] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 8.463958] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.463959] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.463961] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
[ 8.463963] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
[ 8.543585] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.545585] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.546307] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.547239] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.547307] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.547359] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.547414] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.877234] intel_rapl: Found RAPL domain package
[ 8.877237] intel_rapl: Found RAPL domain core
[ 8.877239] intel_rapl: Found RAPL domain uncore
[ 8.877248] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 9.198889] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[ 9.641304] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[ 9.723425] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.724336] usbcore: registered new interface driver rt73usb
[ 10.017137] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0
[ 10.771849] Adding 4071420k swap on /dev/sda5. Priority:-1 extents:1 across:4071420k FS
[ 16.104610] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[ 16.163639] rt73usb 1-1.4:1.0: firmware: direct-loading firmware rt73.bin
[ 16.163642] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[ 18.011758] wlx0008d3359008: authenticate with 14:0c:76:f8:6d:28
[ 18.063552] wlx0008d3359008: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[ 18.065179] wlx0008d3359008: authenticated
[ 18.066831] wlx0008d3359008: associate with 14:0c:76:f8:6d:28 (try 1/3)
[ 18.071103] wlx0008d3359008: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=1)
[ 18.080909] wlx0008d3359008: associated
[ 18.888820] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 27.089344] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 971.811341] usb 2-1.8: USB disconnect, device number 5
root@LibraZiK-studio-audio:/home/nicolasmao2#
[ 8.133799] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.133893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.463403] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[ 8.463953] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 8.463955] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 8.463957] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 8.463958] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.463959] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.463961] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
[ 8.463963] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
[ 8.543585] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.545585] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.546307] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.547239] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.547307] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.547359] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.547414] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.877234] intel_rapl: Found RAPL domain package
[ 8.877237] intel_rapl: Found RAPL domain core
[ 8.877239] intel_rapl: Found RAPL domain uncore
[ 8.877248] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 9.198889] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[ 9.641304] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[ 9.723425] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.724336] usbcore: registered new interface driver rt73usb
[ 10.017137] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0
[ 10.771849] Adding 4071420k swap on /dev/sda5. Priority:-1 extents:1 across:4071420k FS
[ 16.104610] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[ 16.163639] rt73usb 1-1.4:1.0: firmware: direct-loading firmware rt73.bin
[ 16.163642] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[ 18.011758] wlx0008d3359008: authenticate with 14:0c:76:f8:6d:28
[ 18.063552] wlx0008d3359008: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[ 18.065179] wlx0008d3359008: authenticated
[ 18.066831] wlx0008d3359008: associate with 14:0c:76:f8:6d:28 (try 1/3)
[ 18.071103] wlx0008d3359008: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=1)
[ 18.080909] wlx0008d3359008: associated
[ 18.888820] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 27.089344] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 971.811341] usb 2-1.8: USB disconnect, device number 5
root@LibraZiK-studio-audio:/home/nicolasmao2#