Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

dan06 · 25-06-2017 18:54:28

Bonjour,
Venant d'acheter un nouveau PC (carte mère : http://www.asrock.com/mb/Intel/H110M-DV … dex.fr.asp ), j'aimerais y installer Stretch.
Après avoir téléchargé le DVD1 de Debian 9 amd 64 et vérifié le MD5, je l'ai gravé sur un DVD-RW.
Sur mon ancien PC, il s'est installé sans aucun problème, mais avec le même DVD, l'installation est impossible sur le PC Sedatech.
J'ai essayé de désactiver l'UEFI, mais je n'ai aucun indice dans le BIOS qui m'indique que j'ai réussi, par contre, le fast-boot est bien en "disable".
Lorsque je boot sur le DVD pour installer, toute la procédure se déroule normalement, téléchargement et installation des paquets, le grub...etc...
Au 1er reboot, il affiche quelques secondes plusieurs lignes de messages commençant par ACPI Error, puis il accepte mon identifiant et mon mot de passe.
Il affiche après un bureau vide, sans tableau de bord. La souris fonctionne, avec comme possibilités au clic droit : créer un dossier, un lanceur, un document, organiser le bureau par nom, garder aligné, changer l'arrière plan du bureau.
Après plusieurs tentatives d'installations de distributions en .deb, ce PC n'accepte d'installer que Jessie Mate 64 bits et Linux Mint 18.1 Serena Mate, qui fonctionnent nickel, je me contente d'y ajouter le firmware Intel Microcode ensuite.
J'aimerais savoir quelles sont les différences entre Jessie et Stretch au niveau de l'installation qui puissent expliquer ces échecs et comment y remédier...
Par avance, merci de vos suggestions.

Dernière modification par dan06 (29-10-2017 15:27:52)

anonyme · 25-06-2017 19:04:56

Bonjour
j'ai deux PC en intel , un skylake i3 ddr3 et un kabylake i7 7700 en ddr4 sans aucun soucis sur stretch
donc il faut chercher la cause , tu utilise le gpu intel ou tu a acheté une carte vidéo supplémentaire
si l installation est allé jusqu au bout c'est déja bien
si tu arrive a entrer sur une console pure par la combinaison de touches "Ctrl+Alt+F1" et te logguer en root , il y a des paquets a installer comme "firmware-misc-nonfree" pour le gpu intel

dan06 · 25-06-2017 19:16:30

Merci de ta réponse anonyme,
Non, je n'ai installé aucune carte graphique supplémentaire.
Lorsque je referai une tentative, j'essaierai la console...tu penses que le fait d'installer le firmware me donnerait accès à tout le reste ?

dan06 · 27-06-2017 12:35:47

Bonjour, J'ai retenté un installation de Stretch en netinsta USB, hélas cela ne change rien, toute la procédure se passe normalement pour arriver sur un bureau vide au 1er reboot.
Comme le suggérait anonyme, j'ai accès à la console par Ctrl-Alt-F1 ou F2...reste à savoir ce qu'il faudrait y entrer...
J'ai relevé les messages qui apparaissent, désolé pour la qualité des photos, mon doro fait ce qu'il peut...
https://lut.im/HPXpmOjEQF/YPXAQ5wwj1PhhiHD.jpg
https://lut.im/RYsreUaGNG/kq0XopdUf6pHrkFZ.jpg
Ce serait peut être une piste pour les gens qui savent...

anonyme · 27-06-2017 13:47:06

Bonjour
mettre ton fichier sources.list a jour , comme ceci ( avec contrib et non-free )

#stretch 9

deb http://deb.debian.org/debian stretch main contrib non-free

deb http://security.debian.org/ stretch/updates main contrib non-free

deb http://deb.debian.org/debian stretch-updates main contrib non-free

#deb http://ftp.fr.debian.org/debian stretch-backports main contrib non-free

tu fais

apt-get update

 

puis

apt-get install firmware-misc-nonfree

 

pour realtek

apt-get install firmware-realtek

 

un reboot de la machine et nous dire si cela est mieux au niveau bureau.

pour répondre a ton #3 oui je pense que les deux firmware vont améliorer le fonctionnement (le misc pour le gpu kabylake et le realtek pour le réseau )
sur ce que tu a posté comme image , j ai vu une erreur de chargement sur le firmware realtek

Dernière modification par anonyme (27-06-2017 13:53:26)

dan06 · 27-06-2017 15:19:56

anonyme :
Pas évident de se loguer en root, faut s'y prendre en plusieurs fois, mais bon, j'y suis arrivé et j'ai installé les 2 firmwares.
Je n'ai plus d'erreur signalée au démarrage, sauf les acpi,et j'arrive toujours sur ce fameux bureau vide...
Merci

Dernière modification par dan06 (27-06-2017 15:49:40)

anonyme · 27-06-2017 15:59:53

tu peu confirmer ton profil , je vois Mate et Jessie

pour se logger en console pure (pas graphique ) utilisateur => root mdp => root

ou alors utilisateur => ton user mdp de => user puis "su" et mdp => root

on parle bien de cette machine en I5 intel 7 ème génération (kabylake ) => "Sedatech PC de bureau Intel i5-7400 4x 3.00Ghz, Intel HD Graphics 630, 8 Go RAM DDR4 2133 Mhz Jessie maté"
la différence c'est que nativement jessie ne connait pas ce matériel il faut utiliser les backports de jessie
donc pas logique ce que tu explique mais bon on va trouver ce qui va pas

Dernière modification par anonyme (27-06-2017 16:04:53)

dan06 · 27-06-2017 16:03:22

Oui, j'avais Jessie au départ et je l'ai remplacée par Mint 18.1 Mate
Au sujet des firmwares c'est ok ils sont installés mais aucun changement...

dan06 · 27-06-2017 16:06:49

Oui tout à fait, ma machine principale c'est le Sedatech

anonyme · 27-06-2017 16:08:51

Donc pour l installation de strech , tu décoche la première ligne (bureau par defaut ) et tu coche Mate comme bureau ?

tu peu donner le retour de ceci (a partir de ta stretch)

cat /var/log/Xorg.0.log

 

sur le disque dur tu a combien d OS (win et ou linux ) je pause cette question si pas un mélange de fichiers de configuration par hasard

Dernière modification par anonyme (27-06-2017 16:10:15)

dan06 · 27-06-2017 16:12:23

Voilà les erreurs qui subsistent au reboot
https://lut.im/L88GWHkwV2/fGc24tD2CLgAKW3y.jpg

dan06 · 27-06-2017 16:21:40

Juste 1 OS
Par contre, j'ai une multitude de lignes dans la réponse à ta question...et je ne peux rien envoyer depuis stretch, je t'écris depuis mon vieux PC
J'avais Mint 18.1 que je veux remplacer par Stretch, rien d'autre

Dernière modification par dan06 (27-06-2017 16:26:34)

anonyme · 27-06-2017 16:34:43

la partition /home a été créé a l installation de stretch ou tu utilise une déja existante ?
les erreurs acpi ne me choque pas trop , j'en ai plein sur les machines sans que ça pause problème .

essaie de taper cette commande en mode simulation

apt-get -s install lightdm

 

il doit te répondre que c'est déja la version la plus récente installé .
comme ceci

Lecture des listes de paquets... Fait

Construction de l'arbre des dépendances       

Lecture des informations d'état... Fait

lightdm is already the newest version (1.18.3-3).

0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

ensuite tu fais

apt-get remove --purge xserver-xorg-video-intel

 

voir si avec le driver du noyau (KMS) c'est mieux (faut rebooter la machine )

ce qui me dérange c'est ce bureau vide , c'est pas courant comme bug

Dernière modification par anonyme (27-06-2017 16:43:35)

dan06 · 27-06-2017 16:36:34

oui, je ne fais pas de double boot, donc je l'ai créee et formatée pour l'insta de stretch

Donc pour l installation de strech , tu décoche la première ligne (bureau par defaut ) et tu coche Mate comme bureau ? oui

Dernière modification par dan06 (27-06-2017 16:37:23)

dan06 · 27-06-2017 16:39:56

J'ai 1 partition de 50 GO pour /
1 swap de 8 Go
1 partition de 950 Go pour home
le tout en ext 4

anonyme · 27-06-2017 16:46:49

ok regarde mon #13 j'ai complété
donc une installation propre , et un formatage complet des partitions donc on écarte un melange de distribution .

reste a confirmer que tu utilise bien lightdm et pas gdm3 avec Mate
et tester le driver de KMS plutot que celui du serveur X

dan06 · 27-06-2017 16:53:35

Effectivement il répond ce que tu suggérais
j'ai tapé ensuite apt-get remove --purge xserver-xorg-video-intel
et rebooté, mais aucun changement...
Tu penses que si j'essayais d'installer Stretch avec un autre bureau ce serait une piste possible, en cochant maté et xfce par exemple ?

Dernière modification par dan06 (27-06-2017 17:07:14)

anonyme · 27-06-2017 17:07:40

donc tu a bien lightdm installé , ça ressemble pas a un souci graphique
il reste l option de désactiver KMS par grub et forcer vesa par modeset=0 ou i915.modeset=0 mais j y crois pas trop
je vois pas trop pourquoi ton bureau est vide
le serveur X t affiche une page (donc il fonctionne ) mais c est le bureau qui se charge pas.
tu a absolument rien comme menu sur le bureau ? , la couleur de l écran , tu a le fond d' écran de stretch ?

en bas a droite les 4 espaces de travail ou pas

tu peu tester gnome-core et gdm3 comme bureau

apt-get install gnome-core gdm3

 

et tu répond a la question utiliser lightdm ou gdm3 => gdm3
si il y a souci graphique ça va buguer

Dernière modification par anonyme (27-06-2017 17:15:18)

dan06 · 27-06-2017 17:09:56

Oui, j'ai le fond d'écran bleu de Stretch...et la souris, aucun tableau de bord, mais par le clic-droit, je peux changer le papier-peint du bureau par "Préférences de l'apparence" et ses 4 onglets...

Dernière modification par dan06 (27-06-2017 17:15:39)

anonyme · 27-06-2017 17:18:00

la tu me pose une colle

, on va voir si un membre plus éclairé que moi sur la problème

ça confirme que le serveur X fait son job , afficher une page vide , c'est aprés que ça coince et pourquoi .

dan06 · 27-06-2017 17:24:47

Bon, voilà, il a téléchargé et paramétré un tas de fichiers...je reboot....écran noir, pas de demande d'identification

Dernière modification par dan06 (27-06-2017 17:26:34)

dan06 · 27-06-2017 17:28:21

Ok anonyme, merci d'avoir pris du temps pour m'aider, je remets la Mint 18.1....
A bientôt peut être...

anonyme · 27-06-2017 17:29:35

voila ce que j'aime

donc il y a un souci avec le serveur X et gdm3

la combinaison de touches Ctrl+Alt+F1 te permet de récupérer un console pure ?

dan06 · 27-06-2017 17:31:47

Non, il est planté de chez planté, rien à faire sauf un reboot à la sauvage...

Dernière modification par dan06 (27-06-2017 17:31:59)

anonyme · 27-06-2017 17:39:18

je suis sous une machine en Mate + lightdm sous gpu intel kabylake I7

lspci

 

00.0 Host bridge: Intel Corporation Device 591f (rev 05)

02.0 VGA compatible controller: Intel Corporation Device 5912 (rev 04)

14.0 USB controller: Intel Corporation Device a2af

16.0 Communication controller: Intel Corporation Device a2ba

17.0 SATA controller: Intel Corporation Device a282

1b.0 PCI bridge: Intel Corporation Device a2e7 (rev f0)

1c.0 PCI bridge: Intel Corporation Device a290 (rev f0)

1c.4 PCI bridge: Intel Corporation Device a294 (rev f0)

1d.0 PCI bridge: Intel Corporation Device a298 (rev f0)

1f.0 ISA bridge: Intel Corporation Device a2c5

1f.2 Memory controller: Intel Corporation Device a2a1

1f.3 Audio device: Intel Corporation Device a2f0

1f.4 SMBus: Intel Corporation Device a2a3

1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V

00.0 USB controller: ASMedia Technology Inc. Device 2142

sous stretch 9 mais intallé il y a un moment (netinstall rc3 ou dvd1 rc3 ) , il y a un poste de ma part sur kabylake et le gpu intel
juste pour te montrer que ça fonctionne

uname -a

 

Linux kabylake1 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64 GNU/Linux

 

je suis sous KMS , le driver du noyau 4.9.0-3

[    72.235] 

X.Org X Server 1.19.3

Release Date: 2017-03-15

[    72.235] X Protocol Version 11, Revision 0

[    72.235] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian

[    72.235] Current Operating System: Linux kabylake1 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64

[    72.235] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=86c32ed3-f4c3-4017-9780-ece68d5c504d ro quiet

[    72.235] Build Date: 15 March 2017  09:21:41PM

[    72.235] xorg-server 2:1.19.3-1 (https://www.debian.org/support) 

[    72.235] Current version of pixman: 0.34.0

[    72.235]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    72.235] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    72.235] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 27 18:37:14 2017

[    72.302] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    72.418] (==) No Layout section.  Using the first Screen section.

[    72.418] (==) No screen section available. Using defaults.

[    72.418] (**) |-->Screen "Default Screen Section" (0)

[    72.418] (**) |   |-->Monitor "<default monitor>"

[    72.445] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    72.445] (==) Automatically adding devices

[    72.445] (==) Automatically enabling devices

[    72.445] (==) Automatically adding GPU devices

[    72.445] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    72.500] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    72.500]  Entry deleted from font path.

[    72.500] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.

[    72.500]  Entry deleted from font path.

[    72.500] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.

[    72.500]  Entry deleted from font path.

[    72.500] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.

[    72.500]  Entry deleted from font path.

[    72.500] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.

[    72.500]  Entry deleted from font path.

[    72.500] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.

[    72.500]  Entry deleted from font path.

[    72.500] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  built-ins

[    72.500] (==) ModulePath set to "/usr/lib/xorg/modules"

[    72.500] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    72.500] (II) Loader magic: 0x55d3f1ad6e00

[    72.500] (II) Module ABI versions:

[    72.500]  X.Org ANSI C Emulation: 0.4

[    72.500]  X.Org Video Driver: 23.0

[    72.500]  X.Org XInput driver : 24.1

[    72.500]  X.Org Server Extension : 10.0

[    72.501] (++) using VT number 7

[    72.501] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[    72.502] (II) xfree86: Adding drm device (/dev/dri/card0)

[    72.507] (--) PCI:*(0:0:2:0) 8086:5912:1043:872f rev 4, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072

[    72.508] (II) LoadModule: "glx"

[    72.561] (II) Loading /usr/lib/xorg/modules/linux/libglx.so

[    74.328] (II) Module glx: vendor="NVIDIA Corporation"

[    74.328]  compiled for 4.0.2, module version = 1.0.0

[    74.328]  Module class: X.Org Server Extension

[    74.328] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017

[    74.331] (==) Matched modesetting as autoconfigured driver 0

[    74.331] (==) Matched fbdev as autoconfigured driver 1

[    74.331] (==) Matched vesa as autoconfigured driver 2

[    74.331] (==) Assigned the driver to the xf86ConfigLayout

[    74.331] (II) LoadModule: "modesetting"

[    74.341] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    74.359] (II) Module modesetting: vendor="X.Org Foundation"

[    74.359]  compiled for 1.19.3, module version = 1.19.3

[    74.359]  Module class: X.Org Video Driver

[    74.359]  ABI class: X.Org Video Driver, version 23.0

[    74.359] (II) LoadModule: "fbdev"

[    74.360] (WW) Warning, couldn't open module fbdev

[    74.360] (II) UnloadModule: "fbdev"

[    74.360] (II) Unloading fbdev

[    74.360] (EE) Failed to load module "fbdev" (module does not exist, 0)

[    74.360] (II) LoadModule: "vesa"

[    74.360] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    74.377] (II) Module vesa: vendor="X.Org Foundation"

[    74.377]  compiled for 1.19.0, module version = 2.3.4

[    74.377]  Module class: X.Org Video Driver

[    74.377]  ABI class: X.Org Video Driver, version 23.0

[    74.377] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    74.377] (II) VESA: driver for VESA chipsets: vesa

[    74.409] (II) modeset(0): using drv /dev/dri/card0

[    74.409] (WW) Falling back to old probe method for vesa

[    74.409] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    74.409] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[    74.409] (==) modeset(0): RGB weight 888

[    74.409] (==) modeset(0): Default visual is TrueColor

[    74.409] (II) Loading sub module "glamoregl"

[    74.409] (II) LoadModule: "glamoregl"

[    74.409] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    74.652] (II) Module glamoregl: vendor="X.Org Foundation"

[    74.652]  compiled for 1.19.3, module version = 1.0.0

[    74.652]  ABI class: X.Org ANSI C Emulation, version 0.4

[    74.652] (II) glamor: OpenGL accelerated X.org driver based.

[    74.979] (EE) modeset(0): eglGetDisplay() failed

[    74.980] (EE) modeset(0): glamor initialization failed

[    74.980] (II) modeset(0): ShadowFB: preferred YES, enabled YES

[    74.980] (II) modeset(0): Double-buffered shadow updates: off

[    74.980] (II) modeset(0): Output DP-1 has no monitor section

[    74.981] (II) modeset(0): Output HDMI-1 has no monitor section

[    74.982] (II) modeset(0): Output HDMI-2 has no monitor section

[    74.996] (II) modeset(0): Output HDMI-3 has no monitor section

[    74.996] (II) modeset(0): EDID for output DP-1

[    74.997] (II) modeset(0): EDID for output HDMI-1

[    74.998] (II) modeset(0): EDID for output HDMI-2

[    75.011] (II) modeset(0): EDID for output HDMI-3

[    75.011] (II) modeset(0): Manufacturer: ACR  Model: 17  Serial#: 2221946188

[    75.011] (II) modeset(0): Year: 2008  Week: 47

[    75.011] (II) modeset(0): EDID Version: 1.3

[    75.011] (II) modeset(0): Digital Display Input

[    75.011] (II) modeset(0): Max Image Size [cm]: horiz.: 41  vert.: 26

[    75.011] (II) modeset(0): Gamma: 2.20

[    75.011] (II) modeset(0): DPMS capabilities: StandBy Suspend Off

[    75.011] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 

[    75.011] (II) modeset(0): First detailed timing is preferred mode

[    75.011] (II) modeset(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589

[    75.011] (II) modeset(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329

[    75.011] (II) modeset(0): Supported established timings:

[    75.011] (II) modeset(0): 720x400@70Hz

[    75.011] (II) modeset(0): 640x480@60Hz

[    75.011] (II) modeset(0): 640x480@67Hz

[    75.011] (II) modeset(0): 640x480@72Hz

[    75.011] (II) modeset(0): 640x480@75Hz

[    75.011] (II) modeset(0): 800x600@56Hz

[    75.011] (II) modeset(0): 800x600@60Hz

[    75.011] (II) modeset(0): 800x600@72Hz

[    75.011] (II) modeset(0): 800x600@75Hz

[    75.011] (II) modeset(0): 832x624@75Hz

[    75.011] (II) modeset(0): 1024x768@60Hz

[    75.011] (II) modeset(0): 1024x768@70Hz

[    75.011] (II) modeset(0): 1024x768@75Hz

[    75.011] (II) modeset(0): 1280x1024@75Hz

[    75.011] (II) modeset(0): 1152x864@75Hz

[    75.011] (II) modeset(0): Manufacturer's mask: 10

[    75.011] (II) modeset(0): Supported standard timings:

[    75.011] (II) modeset(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149

[    75.011] (II) modeset(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989

[    75.011] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897

[    75.011] (II) modeset(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513

[    75.011] (II) modeset(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337

[    75.011] (II) modeset(0): Supported detailed timing:

[    75.011] (II) modeset(0): clock: 106.5 MHz   Image Size:  410 x 256 mm

[    75.011] (II) modeset(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0

[    75.011] (II) modeset(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0

[    75.011] (II) modeset(0): Serial No: LBL0C0244052

[    75.011] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz

[    75.011] (II) modeset(0): Monitor name: B193W

[    75.011] (II) modeset(0): EDID (in hex):

[    75.011] (II) modeset(0):   00ffffffffffff00047217004c357084

[    75.011] (II) modeset(0):   2f12010380291a78ead7a5a2594a9624

[    75.011] (II) modeset(0):   145054bfef909500950f81808140714f

[    75.011] (II) modeset(0):   0101010101019a29a0d0518422305098

[    75.011] (II) modeset(0):   36009a001100001c000000ff004c424c

[    75.011] (II) modeset(0):   3043303234343035320a000000fd0032

[    75.011] (II) modeset(0):   4b1e520e000a202020202020000000fc

[    75.011] (II) modeset(0):   0042313933570a202020202020200094

[    75.011] (II) modeset(0): Printing probed modes for output HDMI-3

[    75.011] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    75.011] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    75.011] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    75.011] (II) modeset(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    75.011] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[    75.011] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    75.011] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    75.011] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    75.011] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    75.011] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    75.011] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    75.011] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    75.011] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    75.011] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    75.011] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    75.011] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    75.011] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    75.011] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    75.011] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    75.011] (II) modeset(0): Output DP-1 disconnected

[    75.011] (II) modeset(0): Output HDMI-1 disconnected

[    75.011] (II) modeset(0): Output HDMI-2 disconnected

[    75.011] (II) modeset(0): Output HDMI-3 connected

[    75.011] (II) modeset(0): Using exact sizes for initial modes

[    75.011] (II) modeset(0): Output HDMI-3 using initial mode 1440x900 +0+0

[    75.011] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[    75.011] (==) modeset(0): DPI set to (96, 96)

[    75.011] (II) Loading sub module "fb"

[    75.011] (II) LoadModule: "fb"

[    75.011] (II) Loading /usr/lib/xorg/modules/libfb.so

[    75.102] (II) Module fb: vendor="X.Org Foundation"

[    75.102]  compiled for 1.19.3, module version = 1.0.0

[    75.102]  ABI class: X.Org ANSI C Emulation, version 0.4

[    75.102] (II) Loading sub module "shadow"

[    75.102] (II) LoadModule: "shadow"

[    75.102] (II) Loading /usr/lib/xorg/modules/libshadow.so

[    75.122] (II) Module shadow: vendor="X.Org Foundation"

[    75.122]  compiled for 1.19.3, module version = 1.1.0

[    75.122]  ABI class: X.Org ANSI C Emulation, version 0.4

[    75.122] (II) UnloadModule: "vesa"

[    75.122] (II) Unloading vesa

[    75.122] (==) Depth 24 pixmap format is 32 bpp

[    75.124] (==) modeset(0): Backing store enabled

[    75.124] (==) modeset(0): Silken mouse enabled

[    75.124] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    75.148] (==) modeset(0): DPMS enabled

[    75.148] (--) RandR disabled

[    75.155] (II) SELinux: Disabled on system

[    75.168] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

[    75.168] (II) modeset(0): Damage tracking initialized

[    75.168] (II) modeset(0): Setting screen physical size to 381 x 238

[    75.559] (II) config/udev: Adding input device Power Button (/dev/input/event2)

[    75.559] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    75.559] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    75.559] (II) LoadModule: "libinput"

[    75.559] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    75.629] (II) Module libinput: vendor="X.Org Foundation"

[    75.630]  compiled for 1.19.0, module version = 0.23.0

[    75.630]  Module class: X.Org XInput Driver

[    75.630]  ABI class: X.Org XInput driver, version 24.1

[    75.630] (II) Using input driver 'libinput' for 'Power Button'

[    75.630] (**) Power Button: always reports core events

[    75.630] (**) Option "Device" "/dev/input/event2"

[    75.630] (**) Option "_source" "server/udev"

[    75.630] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard

[    75.630] (II) input device 'Power Button', /dev/input/event2 is a keyboard

[    75.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event2"

[    75.648] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    75.648] (**) Option "xkb_model" "pc105"

[    75.648] (**) Option "xkb_layout" "fr"

[    75.648] (**) Option "xkb_variant" "latin9"

[    75.663] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard

[    75.663] (II) input device 'Power Button', /dev/input/event2 is a keyboard

[    75.664] (II) config/udev: Adding input device Video Bus (/dev/input/event5)

[    75.664] (**) Video Bus: Applying InputClass "evdev keyboard catchall"

[    75.664] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    75.664] (II) Using input driver 'libinput' for 'Video Bus'

[    75.664] (**) Video Bus: always reports core events

[    75.664] (**) Option "Device" "/dev/input/event5"

[    75.664] (**) Option "_source" "server/udev"

[    75.664] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard

[    75.664] (II) input device 'Video Bus', /dev/input/event5 is a keyboard

[    75.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event5"

[    75.680] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    75.680] (**) Option "xkb_model" "pc105"

[    75.680] (**) Option "xkb_layout" "fr"

[    75.680] (**) Option "xkb_variant" "latin9"

[    75.680] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard

[    75.680] (II) input device 'Video Bus', /dev/input/event5 is a keyboard

[    75.680] (II) config/udev: Adding input device Power Button (/dev/input/event1)

[    75.680] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    75.680] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    75.680] (II) Using input driver 'libinput' for 'Power Button'

[    75.680] (**) Power Button: always reports core events

[    75.680] (**) Option "Device" "/dev/input/event1"

[    75.680] (**) Option "_source" "server/udev"

[    75.680] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard

[    75.680] (II) input device 'Power Button', /dev/input/event1 is a keyboard

[    75.696] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event1"

[    75.696] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)

[    75.696] (**) Option "xkb_model" "pc105"

[    75.696] (**) Option "xkb_layout" "fr"

[    75.696] (**) Option "xkb_variant" "latin9"

[    75.696] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard

[    75.696] (II) input device 'Power Button', /dev/input/event1 is a keyboard

[    75.696] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)

[    75.696] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"

[    75.696] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[    75.696] (II) Using input driver 'libinput' for 'Sleep Button'

[    75.696] (**) Sleep Button: always reports core events

[    75.696] (**) Option "Device" "/dev/input/event0"

[    75.696] (**) Option "_source" "server/udev"

[    75.696] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard

[    75.696] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard

[    75.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event0"

[    75.712] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)

[    75.712] (**) Option "xkb_model" "pc105"

[    75.712] (**) Option "xkb_layout" "fr"

[    75.712] (**) Option "xkb_variant" "latin9"

[    75.712] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard

[    75.712] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard

[    75.713] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event6)

[    75.713] (**) SEM USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    75.713] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"

[    75.713] (II) Using input driver 'libinput' for 'SEM USB Keyboard'

[    75.713] (**) SEM USB Keyboard: always reports core events

[    75.713] (**) Option "Device" "/dev/input/event6"

[    75.713] (**) Option "_source" "server/udev"

[    75.714] (II) input device 'SEM USB Keyboard', /dev/input/event6 is tagged by udev as: Keyboard

[    75.714] (II) input device 'SEM USB Keyboard', /dev/input/event6 is a keyboard

[    75.744] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1A2C:0E24.0001/input/input9/event6"

[    75.744] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 10)

[    75.744] (**) Option "xkb_model" "pc105"

[    75.744] (**) Option "xkb_layout" "fr"

[    75.744] (**) Option "xkb_variant" "latin9"

[    75.745] (II) input device 'SEM USB Keyboard', /dev/input/event6 is tagged by udev as: Keyboard

[    75.745] (II) input device 'SEM USB Keyboard', /dev/input/event6 is a keyboard

[    75.746] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event8)

[    75.746] (**) SEM USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    75.746] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"

[    75.746] (II) Using input driver 'libinput' for 'SEM USB Keyboard'

[    75.746] (**) SEM USB Keyboard: always reports core events

[    75.746] (**) Option "Device" "/dev/input/event8"

[    75.746] (**) Option "_source" "server/udev"

[    75.747] (II) input device 'SEM USB Keyboard', /dev/input/event8 is tagged by udev as: Keyboard

[    75.747] (II) input device 'SEM USB Keyboard', /dev/input/event8 is a keyboard

[    75.776] (II) libinput: SEM USB Keyboard: needs a virtual subdevice

[    75.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1A2C:0E24.0002/input/input18/event8"

[    75.776] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: MOUSE, id 11)

[    75.776] (**) Option "AccelerationScheme" "none"

[    75.776] (**) SEM USB Keyboard: (accel) selected scheme none/0

[    75.776] (**) SEM USB Keyboard: (accel) acceleration factor: 2.000

[    75.776] (**) SEM USB Keyboard: (accel) acceleration threshold: 4

[    75.777] (II) input device 'SEM USB Keyboard', /dev/input/event8 is tagged by udev as: Keyboard

[    75.777] (II) input device 'SEM USB Keyboard', /dev/input/event8 is a keyboard

[    75.778] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event7)

[    75.778] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"

[    75.778] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"

[    75.778] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'

[    75.778] (**) PixArt Microsoft USB Optical Mouse: always reports core events

[    75.778] (**) Option "Device" "/dev/input/event7"

[    75.778] (**) Option "_source" "server/udev"

[    75.836] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event7 is tagged by udev as: Mouse

[    75.836] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event7 is a pointer caps

[    75.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:045E:00CB.0004/input/input21/event7"

[    75.872] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 12)

[    75.872] (**) Option "AccelerationScheme" "none"

[    75.872] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0

[    75.872] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000

[    75.872] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4

[    75.932] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event7 is tagged by udev as: Mouse

[    75.932] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event7 is a pointer caps

[    75.933] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)

[    75.933] (II) No input driver specified, ignoring this device.

[    75.933] (II) This device may have been added with another device file.

[    75.934] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)

[    75.934] (II) No input driver specified, ignoring this device.

[    75.934] (II) This device may have been added with another device file.

[    75.934] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)

[    75.934] (II) No input driver specified, ignoring this device.

[    75.934] (II) This device may have been added with another device file.

[    75.935] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)

[    75.935] (II) No input driver specified, ignoring this device.

[    75.935] (II) This device may have been added with another device file.

[    75.935] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)

[    75.935] (II) No input driver specified, ignoring this device.

[    75.935] (II) This device may have been added with another device file.

[    75.936] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)

[    75.936] (II) No input driver specified, ignoring this device.

[    75.936] (II) This device may have been added with another device file.

[    75.936] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)

[    75.936] (II) No input driver specified, ignoring this device.

[    75.936] (II) This device may have been added with another device file.

[    75.937] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)

[    75.937] (II) No input driver specified, ignoring this device.

[    75.937] (II) This device may have been added with another device file.

[    75.937] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)

[    75.937] (II) No input driver specified, ignoring this device.

[    75.937] (II) This device may have been added with another device file.

[    75.938] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)

[    75.938] (II) No input driver specified, ignoring this device.

[    75.938] (II) This device may have been added with another device file.

[    75.938] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)

[    75.938] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"

[    75.938] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[    75.938] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'

[    75.938] (**) Eee PC WMI hotkeys: always reports core events

[    75.938] (**) Option "Device" "/dev/input/event4"

[    75.938] (**) Option "_source" "server/udev"

[    75.939] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard

[    75.939] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard

[    75.956] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"

[    75.956] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)

[    75.956] (**) Option "xkb_model" "pc105"

[    75.956] (**) Option "xkb_layout" "fr"

[    75.956] (**) Option "xkb_variant" "latin9"

[    75.957] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard

[    75.957] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard

[    75.957] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)

[    75.957] (II) No input driver specified, ignoring this device.

[    75.957] (II) This device may have been added with another device file.

[    75.967] (**) SEM USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    75.967] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"

[    75.967] (II) Using input driver 'libinput' for 'SEM USB Keyboard'

[    75.967] (**) SEM USB Keyboard: always reports core events

[    75.967] (**) Option "Device" "/dev/input/event8"

[    75.967] (**) Option "_source" "_driver/libinput"

[    75.967] (II) libinput: SEM USB Keyboard: is a virtual subdevice

[    75.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1A2C:0E24.0002/input/input18/event8"

[    75.967] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 14)

[    75.967] (**) Option "xkb_model" "pc105"

[    75.967] (**) Option "xkb_layout" "fr"

[    75.967] (**) Option "xkb_variant" "latin9"

[    91.701] (II) modeset(0): EDID vendor "ACR", prod id 23

[    91.701] (II) modeset(0): Using EDID range info for horizontal sync

[    91.701] (II) modeset(0): Using EDID range info for vertical refresh

[    91.701] (II) modeset(0): Printing DDC gathered Modelines:

[    91.701] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    91.701] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    91.701] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    91.701] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    91.702] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    91.702] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    91.702] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    91.702] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    91.702] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    91.702] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    91.702] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    91.702] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    91.702] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    91.702] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    91.702] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    91.702] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    91.702] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[    91.702] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    91.702] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    91.702] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[    91.719] (II) modeset(0): EDID vendor "ACR", prod id 23

[    91.719] (II) modeset(0): Using hsync ranges from config file

[    91.719] (II) modeset(0): Using vrefresh ranges from config file

[    91.719] (II) modeset(0): Printing DDC gathered Modelines:

[    91.719] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    91.719] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    91.719] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    91.719] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    91.719] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    91.719] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    91.719] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    91.719] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    91.719] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    91.719] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    91.719] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    91.720] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    91.720] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    91.720] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    91.720] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    91.720] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    91.720] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[    91.720] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    91.720] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    91.720] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[    91.781] (II) modeset(0): EDID vendor "ACR", prod id 23

[    91.781] (II) modeset(0): Using hsync ranges from config file

[    91.781] (II) modeset(0): Using vrefresh ranges from config file

[    91.781] (II) modeset(0): Printing DDC gathered Modelines:

[    91.781] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    91.781] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    91.781] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    91.781] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    91.781] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    91.781] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    91.781] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    91.781] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    91.781] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    91.781] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    91.781] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    91.781] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    91.781] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    91.781] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    91.781] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    91.781] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    91.781] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[    91.782] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    91.782] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    91.782] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[    91.799] (II) modeset(0): EDID vendor "ACR", prod id 23

[    91.799] (II) modeset(0): Using hsync ranges from config file

[    91.799] (II) modeset(0): Using vrefresh ranges from config file

[    91.799] (II) modeset(0): Printing DDC gathered Modelines:

[    91.799] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    91.799] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    91.799] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    91.799] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    91.799] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    91.799] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    91.799] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    91.799] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    91.799] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    91.799] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    91.799] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    91.799] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    91.799] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    91.799] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    91.799] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    91.799] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    91.799] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[    91.799] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    91.799] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    91.799] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[    95.964] (II) modeset(0): EDID vendor "ACR", prod id 23

[    95.964] (II) modeset(0): Using hsync ranges from config file

[    95.964] (II) modeset(0): Using vrefresh ranges from config file

[    95.964] (II) modeset(0): Printing DDC gathered Modelines:

[    95.964] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    95.964] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    95.964] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    95.964] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    95.964] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    95.964] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    95.964] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    95.964] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    95.964] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    95.964] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    95.964] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    95.964] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    95.964] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    95.964] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    95.964] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    95.964] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    95.964] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[    95.964] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    95.964] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    95.964] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

j'ai le firmware-misc-nonfree installé

normalement cette machine tourne avec une GTX1060 6Go et le driver nonfree nvidia et cuda (tout est actuellement installé )

je vois aucun souci avec le bureau

Dernière modification par anonyme (27-06-2017 17:50:42)

Debian-facile

#1 25-06-2017 18:54:28

Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#2 25-06-2017 19:04:56

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#3 25-06-2017 19:16:30

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#4 27-06-2017 12:35:47

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#5 27-06-2017 13:47:06

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#6 27-06-2017 15:19:56

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#7 27-06-2017 15:59:53

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#8 27-06-2017 16:03:22

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#9 27-06-2017 16:06:49

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#10 27-06-2017 16:08:51

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#11 27-06-2017 16:12:23

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#12 27-06-2017 16:21:40

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#13 27-06-2017 16:34:43

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#14 27-06-2017 16:36:34

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#15 27-06-2017 16:39:56

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#16 27-06-2017 16:46:49

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#17 27-06-2017 16:53:35

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#18 27-06-2017 17:07:40

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#19 27-06-2017 17:09:56

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#20 27-06-2017 17:18:00

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#21 27-06-2017 17:24:47

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#22 27-06-2017 17:28:21

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#23 27-06-2017 17:29:35

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#24 27-06-2017 17:31:47

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

#25 27-06-2017 17:39:18

Re : Résolu-Installation Stretch impossible sur PC récent-Carte AsRock

Pied de page des forums