logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 02-09-2010 21:20:54

lorus
Modérateur
Lieu : /var/log/snort/alert
Distrib. : Debian Squeeze/Wheezy/Freebsd amd64
Noyau : 2.6.32 / 3.2/
(G)UI : Gnome 2.30.2 / 3.2.4 / (bsd)2.32.1
Inscription : 25-07-2010

Mise en veille sous Lenny

Bonjour smile

ma lenny ne sort pas correctement de veille. En cas de veille, l'ordi demarre mais j'arrive sur un écran noir et puis plus rien... pas de tty possible donc !

la mise en hibernation est défectueuse, mon uc ne s'eteind meme pas, l'ecran devient noir et c'est tout !!

J'ai 2Go de ram et un swap de 2.53GO. Je suis intérressé par la mise en veille !!

J'ai installé les paquets acpi support et hibernation to ram mais ce n'est pas mieux hmm

Une piste ?

Merci.

Lorus.

Dernière modification par lorus (02-09-2010 22:54:46)


Si vous êtes fan du « Si ce n’est pas cassé, ne le corrigez pas » , vous serez un grand fan de BSD. Mais si vous êtes du genre à avoir besoin que tout soit le plus récent possible, vous feriez mieux de migrer vers Linux aussi vite que possible histoire de ne pas être à la traîne.BSD a un système de base comprenant de nombreux outils, ils sont tous développés et packagés ensemble pour être cohésif.

Hors ligne

#2 03-09-2010 17:35:26

Clem
Membre
Lieu : Au coin du bois
Distrib. : Stable
Noyau : 4.9.0-4 *-amd-64
(G)UI : XMonad & Mate
Inscription : 09-03-2010

Re : Mise en veille sous Lenny

Bonjour,
Le démon acpid est installé aussi ??

Sinon ça me rappelle quelque chose : Lenny avec un 2.6.26xxx me posait ce genre de problème. En passant a un 2.6.30-bpo-xx je n'ai plus eu de soucis ( bien que je ne sois *absolument* pas certain que cela ne soit pas une coincidence ).

Un p'tit coup de sensor-detect p'tet neutral

Moi, je suis PC (x86_64) et formater windows, c'était MON idée
Le sommeil de la raison ...

Hors ligne

#3 03-09-2010 22:11:01

lorus
Modérateur
Lieu : /var/log/snort/alert
Distrib. : Debian Squeeze/Wheezy/Freebsd amd64
Noyau : 2.6.32 / 3.2/
(G)UI : Gnome 2.30.2 / 3.2.4 / (bsd)2.32.1
Inscription : 25-07-2010

Re : Mise en veille sous Lenny

Bonjour Clem smile

Oui, le démon acpid est installé et actif. J'ai le sentiment que mon problème provient de ma carte graphique nvidia. Je suis sous drivers proprios... installer correctement.
Tout les périphériques s'eveillent mais l'ecran n'ouvre pas le gdm:/ Le résultat est comme si tu choisis un écran vide dans l'economiseur d'écran. 

actuellement, je prospecte ici des fois que : # gedit /etc/default/acpi-support

#
# Configuration file for the acpi-support package
#
#
# The acpi-support package is intended as "glue" to make special functions of
# laptops work. Specifically, it translates special function keys for some
# laptop models into actions or generic function key presses.
#


#
# Suspend/hibernate method
# ------------------------
#
# When gnome-power-manager or klaptopdaemon are running, acpi-support will
# translate the suspend and hibernate keys of laptops into special "suspend"
# and "hibernate" keys that these daemons handle.
#
# Only in situations where there is no gnome-power-manager or klaptopdaemon
# running, acpi-support needs to perform suspend/hibernate in some other way.
# There are several options for this. The options are:
#
# dbus-pm:
#    Perform suspend and hibernate actions via a DBUS request to the power
#    management daemon. This works for power management daemons that we don't
#    know of. (For gnome-power-manager and klaptopdaemon this will do nothing,
#    since those will be detected when they are running, and triggered using
#    a virtual keypress.)
#
# dbus-hal:
#    Perform suspend and hibernate actions via a DBUS request directly to HAL,
#    bypassing any running power management daemons.
#
# pm-utils:
#    Use pm-suspend and pm-hibernate to suspend and hibernate. (The dbus method
#    normally results in this as well, but calls through dbus. Use this option
#    only if you don't have dbus installed.)
#
# hibernate:
#    Use the hibernate package to suspend and hibernate.
#
# acpi-support:
#    Use the legacy built-in suspend/hibernate support. (DEPRECATED)
#
# none:
#    Do not attempt to suspend/hibernate. Set SUSPEND_METHODS="none" to
#    disable suspend/hibernate handling in acpi-support.
#
# If you specify dbus or pm-utils, the result will normally be the same as when
# you suspend from your desktop environment. If you specify "hibernate" or
# "acpi-support", be aware that this probably does not match what your desktop
# environment would do (unless you have managed to configure something so that
# the DBUS power management interfaces call the hibernate package).
#
#
# Please specify a space separated list of options. The recommended value is
# "dbus pm-utils"
#
SUSPEND_METHODS="dbus-pm dbus-hal pm-utils"



#
# LEGACY BUILT IN SUSPEND SUPPORT (DEPRECATED)
# --------------------------------------------
#
# These options only work for the "acpi-support" suspend method. This is NOT
# recommended, but is retained for backward compatibility reasons.
#

# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true

# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true

# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
ACPI_SLEEP_MODE=mem

# Add modules to this list to have them removed before suspend and reloaded
# on resume. An example would be MODULES="em8300 yenta_socket"
#
# Note that network cards and USB controllers will automatically be unloaded
# unless they're listed in MODULES_WHITELIST
MODULES=""

# Add modules to this list to leave them in the kernel over suspend/resume
MODULES_WHITELIST=""

# Should we save and restore state using the VESA BIOS Extensions?
SAVE_VBE_STATE=true

# The file that we use to save the vbestate
VBESTATE=/var/lib/acpi-support/vbestate

# Should we attempt to warm-boot the video hardware on resume?
POST_VIDEO=true

# Save and restore video state?
SAVE_VIDEO_PCI_STATE=true

# Should we switch the screen off with DPMS on suspend?
USE_DPMS=true

# Use Radeontool to switch the screen off? Seems to be needed on some machines
# RADEON_LIGHT=true

# Uncomment the next line to switch away from X and back again after resume.
# This is needed for some hardware, but should be unnecessary on most.
# DOUBLE_CONSOLE_SWITCH=true

# Set the following to "platform" if you want to use ACPI to shut down
# your machine on hibernation
HIBERNATE_MODE=shutdown

# Comment this out to disable screen locking on resume
LOCK_SCREEN=false

# Uncomment this line to have DMA disabled before suspend and reenabled
# afterwards
# DISABLE_DMA=true

# Uncomment this line to attempt to reset the drive on resume. This seems
# to be needed for some Sonys
# RESET_DRIVE=true

# Add services to this list to stop them before suspend and restart them in
# the resume process.
STOP_SERVICES=""

# Restart Infra Red services on resume - off by default as it crashes some
# machines
RESTART_IRDA=false

# Add to this list network interfaces that you don't want to be stopped
# during suspend (in fact any network interface whose name starts with
# a prefix given in this list is skipped)
SKIP_INTERFACES="dummy qemu"

# Note: to enable "laptop mode" (to spin down your hard drive for longer
# periods of time), install the laptop-mode-tools package and configure
# it in /etc/laptop-mode/laptop-mode.conf.
#
# (Note to upgraders: earlier versions of the acpi-support package contained
# an option to enable/disable laptop mode. This option has never actually
# worked, and for that reason it has been removed.)


Et puis mon fichier xorg, je le trouve bien pauvre big_smile J'avais moi même ajouté ceci au xorg car les drivers proprios ne voulaient pas s'activer

Section "Device"
  Identifier  "7600Gs"
  Driver          "nvidia"


---------------------------------------------------------------------

# xorg.conf (X.Org X Window System server configuration file)
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
  Identifier  "Generic Keyboard"
  Driver    "kbd"
  Option    "XkbRules"  "xorg"
  Option    "XkbModel"  "pc105"
  Option    "XkbLayout" "fr"
  Option    "XkbVariant"  "latin9"
EndSection

Section "InputDevice"
  Identifier  "Configured Mouse"
  Driver    "mouse"
EndSection

Section "Device"
  Identifier  "7600Gs"
  Driver          "nvidia"
       

EndSection

Section "Monitor"
  Identifier  "Configured Monitor"
EndSection

Section "Screen"
  Identifier  "Default Screen"
  Monitor   "Configured Monitor"
EndSection


Bref, xorg.conf a-t-il un role dans la mise en veille ? Ou alors et comme tu le soulignes, le noyau de lenny est trop ancien pour mon matos ???


Si vous êtes fan du « Si ce n’est pas cassé, ne le corrigez pas » , vous serez un grand fan de BSD. Mais si vous êtes du genre à avoir besoin que tout soit le plus récent possible, vous feriez mieux de migrer vers Linux aussi vite que possible histoire de ne pas être à la traîne.BSD a un système de base comprenant de nombreux outils, ils sont tous développés et packagés ensemble pour être cohésif.

Hors ligne

Pied de page des forums