Oui je sais, le titre est un peu particulier mais vous allez comprendre.
Je suis sous Deébian 9.1 en dual boot windows 10 installé sur ssd en disque principal.
En cherchant à installer Kali Linux avec persistence sur une clé USB, j'ai un moment, perdu le fil de mes disque, j'ai partitionné mon msata et fait l'installation sur ce disque, le deuxième disque de mon PC.
J'ai depuis retrouvé une organisation de disque précédente, à savoir : debian et windows 10 sur SSD, msata en second disque DATA.
Depuis, le temps de démarrage de ma Debian a plus que triplé.
Alors j'ai bien chercher des solutions, et je crois avoir, en faisant un dmesg, identifié une certain nombre de problème. Malheureusement mon expérience sous debian est un peu limité je l'avoue.
Aussi, je cherche aujourd'hui, auprès des membres sympas, un peu d'aide pour retrouver un démarrage digne de ce nom.
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=63884a40-4bf3-4f8a-a194-f9abc7406888 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a82d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a82d6000-0x00000000a84d7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a84d8000-0x00000000b82a4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b82a5000-0x00000000baeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Vostro 3360/ , BIOS A18 09/25/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 23F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 23F600000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9608000f0100]
[ 0.000000] Base memory trampoline at [ffff96080008b000] 8b000 size 24576
[ 0.000000] BRK [0x5df2e000, 0x5df2efff] PGTABLE
[ 0.000000] BRK [0x5df2f000, 0x5df2ffff] PGTABLE
[ 0.000000] BRK [0x5df30000, 0x5df30fff] PGTABLE
[ 0.000000] BRK [0x5df31000, 0x5df31fff] PGTABLE
[ 0.000000] BRK [0x5df32000, 0x5df32fff] PGTABLE
[ 0.000000] BRK [0x5df33000, 0x5df33fff] PGTABLE
[ 0.000000] BRK [0x5df34000, 0x5df34fff] PGTABLE
[ 0.000000] BRK [0x5df35000, 0x5df35fff] PGTABLE
[ 0.000000] BRK [0x5df36000, 0x5df36fff] PGTABLE
[ 0.000000] BRK [0x5df37000, 0x5df37fff] PGTABLE
[ 0.000000] BRK [0x5df38000, 0x5df38fff] PGTABLE
[ 0.000000] BRK [0x5df39000, 0x5df39fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35d17000-0x36e82fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000BAFFE170 0000AC (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 0x00000000BAFE2000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 0x00000000BAFF0000 00A286 (v02 DELL IVB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BAF7C000 000040
[ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 DELL QA09 00000002 LOHR 00000001)
[ 0.000000] ACPI: BOOT 0x00000000BAFFC000 000028 (v01 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BAFFB000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x00000000BAFEF000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 0x00000000BAFEC000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 0x00000000BAFEB000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 0x00000000BAFEA000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 0x00000000BAFE9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000BAFE8000 0008E4 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BAFE7000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000BAFE6000 00003E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000BAFE5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 0x00000000BAFE4000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000BAFE1000 00027E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000BAFE0000 0003E0 (v01 DELL AoacTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: DBG2 0x00000000BAFDE000 000070 (v00 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23f5f7000-0x23f5fbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000a82d5fff]
[ 0.000000] node 0: [mem 0x00000000a84d8000-0x00000000b82a4fff]
[ 0.000000] node 0: [mem 0x00000000bafff000-0x00000000baffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f5fffff]
[ 0.000000] On node 0 totalpages: 2061363
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11707 pages used for memmap
[ 0.000000] DMA32 zone: 749219 pages, LIFO batch:31
[ 0.000000] Normal zone: 20440 pages used for memmap
[ 0.000000] Normal zone: 1308160 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa82d6000-0xa84d7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb82a5000-0xbaeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaeef000-0xbaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff960a3f200000 s103512 r8192 d31656 u262144
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2029131
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=63884a40-4bf3-4f8a-a194-f9abc7406888 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8013692K/8245452K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 231760K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1795.996 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.99 BogoMIPS (lpj=7183984)
[ 0.000039] pid_max: default: 32768 minimum: 301
[ 0.000061] ACPI: Core revision 20160831
[ 0.009542] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.009607] Security Framework initialized
[ 0.009609] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009615] AppArmor: AppArmor disabled by boot time parameter
[ 0.010180] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013016] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014303] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.014314] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.014654] CPU: Physical Processor ID: 0
[ 0.014655] CPU: Processor Core ID: 0
[ 0.014661] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014661] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.014665] mce: CPU supports 7 MCE banks
[ 0.014684] process: using mwait in idle threads
[ 0.014688] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.014689] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.015230] Freeing SMP alternatives memory: 24K (ffffffff8287a000 - ffffffff82880000)
[ 0.017886] ftrace: allocating 25180 entries in 99 pages
[ 0.033504] smpboot: Max logical packages: 4
[ 0.033581] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.034050] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073739] TSC deadline timer enabled
[ 0.073743] smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.073748] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.073781] ... version: 3
[ 0.073782] ... bit width: 48
[ 0.073782] ... generic registers: 4
[ 0.073783] ... value mask: 0000ffffffffffff
[ 0.073784] ... max period: 00007fffffffffff
[ 0.073784] ... fixed-purpose events: 3
[ 0.073785] ... event mask: 000000070000000f
[ 0.074607] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.074749] x86: Booting SMP configuration:
[ 0.074750] .... node #0, CPUs: #1 #2 #3
[ 0.315906] x86: Booted up 1 node, 4 CPUs
[ 0.315909] smpboot: Total of 4 processors activated (14371.27 BogoMIPS)
[ 0.320237] devtmpfs: initialized
[ 0.320325] x86/mm: Memory block size: 128MB
[ 0.324199] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[ 0.324297] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.324313] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.324379] pinctrl core: initialized pinctrl subsystem
[ 0.324527] NET: Registered protocol family 16
[ 0.339805] cpuidle: using governor ladder
[ 0.351818] cpuidle: using governor menu
[ 0.351862] Simple Boot Flag at 0x66 set to 0x1
[ 0.351875] ACPI: bus type PCI registered
[ 0.351876] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.351975] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.351977] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.351984] PCI: Using configuration type 1 for base access
[ 0.352037] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.352339] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.352340] mtrr: probably your BIOS does not setup all CPUs.
[ 0.352340] mtrr: corrected configuration.
[ 0.368010] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.368333] ACPI: Added _OSI(Module Device)
[ 0.368334] ACPI: Added _OSI(Processor Device)
[ 0.368335] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.368336] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.368609] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.373093] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.373696] ACPI: Dynamic OEM Table Load:
[ 0.373707] ACPI: SSDT 0xFFFF960A3544A000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.374177] ACPI: Dynamic OEM Table Load:
[ 0.374187] ACPI: SSDT 0xFFFF960A355F9000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.374508] ACPI: Dynamic OEM Table Load:
[ 0.374515] ACPI: SSDT 0xFFFF960A368A9E00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.375479] ACPI : EC: EC started
[ 0.375480] ACPI : EC: interrupt blocked
[ 0.376307] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.376310] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.376311] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.376312] ACPI: Interpreter enabled
[ 0.376338] ACPI: (supports S0 S3 S4 S5)
[ 0.376339] ACPI: Using IOAPIC for interrupt routing
[ 0.376372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.384210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.384216] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.384398] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.384993] PCI host bridge to bus 0000:00
[ 0.384996] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.384997] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.384999] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.385001] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[ 0.385003] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.385012] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.385123] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.385135] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.385142] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.385147] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.385284] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.385307] pci 0000:00:14.0: reg 0x10: [mem 0xd0600000-0xd060ffff 64bit]
[ 0.385389] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.385436] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.385492] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.385516] pci 0000:00:16.0: reg 0x10: [mem 0xd0615000-0xd061500f 64bit]
[ 0.385601] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.385709] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.385730] pci 0000:00:1a.0: reg 0x10: [mem 0xd061a000-0xd061a3ff]
[ 0.385827] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.385891] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.385946] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.385966] pci 0000:00:1b.0: reg 0x10: [mem 0xd0610000-0xd0613fff 64bit]
[ 0.386053] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.386156] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.386285] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.386343] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.386404] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.386494] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.386544] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.386603] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.386623] pci 0000:00:1d.0: reg 0x10: [mem 0xd0619000-0xd06193ff]
[ 0.386720] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.386783] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.386837] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.387037] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.387055] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.387064] pci 0000:00:1f.2: reg 0x14: [io 0x309c-0x309f]
[ 0.387073] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.387083] pci 0000:00:1f.2: reg 0x1c: [io 0x3098-0x309b]
[ 0.387091] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.387100] pci 0000:00:1f.2: reg 0x24: [mem 0xd0618000-0xd06187ff]
[ 0.387151] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.387240] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.387259] pci 0000:00:1f.3: reg 0x10: [mem 0xd0614000-0xd06140ff 64bit]
[ 0.387283] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.387524] pci 0000:01:00.0: [8086:0887] type 00 class 0x028000
[ 0.387579] pci 0000:01:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
[ 0.387884] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.387958] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.399960] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.399968] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.400064] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
[ 0.400099] pci 0000:02:00.0: reg 0x10: [mem 0xd0400000-0xd043ffff 64bit]
[ 0.400114] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.400266] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.400316] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.411916] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.411921] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.411925] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.412681] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.412755] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.412825] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.412894] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.412963] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.413032] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.413101] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.413168] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.413477] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.413581] ACPI : EC: interrupt unblocked
[ 0.413587] ACPI : EC: event unblocked
[ 0.413595] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.413596] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.413776] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.413778] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.413780] vgaarb: loaded
[ 0.413781] vgaarb: bridge control possible 0000:00:02.0
[ 0.413871] PCI: Using ACPI for IRQ routing
[ 0.415693] PCI: pci_cache_line_size set to 64 bytes
[ 0.415798] e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff]
[ 0.415800] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.415801] e820: reserve RAM buffer [mem 0xa82d6000-0xabffffff]
[ 0.415802] e820: reserve RAM buffer [mem 0xb82a5000-0xbbffffff]
[ 0.415803] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.415805] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[ 0.416005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.416012] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.418035] clocksource: Switched to clocksource hpet
[ 0.426028] VFS: Disk quotas dquot_6.6.0
[ 0.426077] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.426184] pnp: PnP ACPI init
[ 0.426361] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.426364] system 00:00: [io 0x1000-0x1003] has been reserved
[ 0.426366] system 00:00: [io 0x1004-0x1013] has been reserved
[ 0.426367] system 00:00: [io 0xffff] has been reserved
[ 0.426369] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.426371] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.426373] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.426374] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.426379] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.426414] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.426483] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.426486] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.426537] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.426576] pnp 00:04: Plug and Play ACPI device, IDs DLL055c PNP0f13 (active)
[ 0.426753] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.426756] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.426757] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.426759] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.426762] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.426764] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.426766] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.426768] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.426770] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.426772] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.426774] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.426776] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.427132] pnp: PnP ACPI: found 6 devices
[ 0.434028] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.434065] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.434073] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.434085] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.434088] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.434093] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.434105] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.434106] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.434108] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.434110] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[ 0.434111] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.434113] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.434115] pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.434248] NET: Registered protocol family 2
[ 0.434476] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.434645] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.434787] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.434816] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.434845] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.434930] NET: Registered protocol family 1
[ 0.434947] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.435570] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.435575] PCI: CLS 64 bytes, default 64
[ 0.435636] Unpacking initramfs...
[ 0.874699] Freeing initrd memory: 17840K (ffff960835d17000 - ffff960836e83000)
[ 0.874703] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.874705] software IO TLB [mem 0xb42a5000-0xb82a5000] (64MB) mapped at [ffff9608b42a5000-ffff9608b82a4fff]
[ 0.875221] audit: initializing netlink subsys (disabled)
[ 0.875240] audit: type=2000 audit(1506273720.868:1): initialized
[ 0.875774] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.875830] zbud: loaded
[ 0.876704] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.876747] io scheduler noop registered
[ 0.876748] io scheduler deadline registered
[ 0.876764] io scheduler cfq registered (default)
[ 0.877160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.877167] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.877185] intel_idle: MWAIT substates: 0x21120
[ 0.877187] intel_idle: v0.4.1 model 0x3A
[ 0.877394] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.877635] GHES: HEST is not enabled!
[ 0.877704] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.878270] Linux agpgart interface v0.103
[ 0.878353] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.878353] AMD IOMMUv2 functionality not available on this system
[ 0.878789] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.882064] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.882070] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.882250] mousedev: PS/2 mouse device common for all mice
[ 0.882314] rtc_cmos 00:01: RTC can wake from S4
[ 0.882478] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.882508] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.882521] intel_pstate: Intel P-state driver initializing
[ 0.882747] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.884033] NET: Registered protocol family 10
[ 0.884654] mip6: Mobile IPv6
[ 0.884658] NET: Registered protocol family 17
[ 0.884663] mpls_gso: MPLS GSO support
[ 0.885145] microcode: sig=0x306a9, pf=0x10, revision=0x17
[ 0.885359] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.885700] registered taskstats version 1
[ 0.885737] zswap: loaded using pool lzo/zbud
[ 0.885968] ima: No TPM chip found, activating TPM-bypass!
[ 0.886537] rtc_cmos 00:01: setting system clock to 2017-09-24 17:22:01 UTC (1506273721)
[ 0.886728] PM: Hibernation image not present or could not be loaded.
[ 0.888804] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.889911] Freeing unused kernel memory: 1392K (ffffffff8271e000 - ffffffff8287a000)
[ 0.889914] Write protecting the kernel read-only data: 12288k
[ 0.891177] Freeing unused kernel memory: 1988K (ffff96085d60f000 - ffff96085d800000)
[ 0.898651] Freeing unused kernel memory: 1240K (ffff96085daca000 - ffff96085dc00000)
[ 0.914936] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.945315] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.945448] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.945466] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.947064] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.947131] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.949467] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.949583] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.949616] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.950278] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.950378] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.992142] ACPI: bus type USB registered
[ 0.992174] usbcore: registered new interface driver usbfs
[ 0.992187] usbcore: registered new interface driver hub
[ 0.992217] usbcore: registered new device driver usb
[ 0.992800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.993074] ehci-pci: EHCI PCI platform driver
[ 0.993201] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.993207] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.993223] ehci-pci 0000:00:1a.0: debug port 2
[ 0.997147] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.997163] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd061a000
[ 1.000267] SCSI subsystem initialized
[ 1.001649] alx 0000:02:00.0: Invalid permanent address programmed, using random one
[ 1.002199] libata version 3.00 loaded.
[ 1.003855] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.003856] ACPI: Thermal Zone [TZ00] (40 C)
[ 1.004259] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.004260] ACPI: Thermal Zone [TZ01] (40 C)
[ 1.005196] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [be:04:85:d3:0d:b5]
[ 1.007217] AVX version of gcm_enc/dec engaged.
[ 1.007219] AES CTR mode by8 optimization enabled
[ 1.010036] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.010100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.010102] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.010103] usb usb1: Product: EHCI Host Controller
[ 1.010104] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.010106] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.010437] hub 1-0:1.0: USB hub found
[ 1.010448] hub 1-0:1.0: 2 ports detected
[ 1.010835] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.010841] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.010856] ehci-pci 0000:00:1d.0: debug port 2
[ 1.014756] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.014776] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0619000
[ 1.020357] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 1.030129] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.030333] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.030335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.030337] usb usb2: Product: EHCI Host Controller
[ 1.030338] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.030339] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.030656] hub 2-0:1.0: USB hub found
[ 1.030688] hub 2-0:1.0: 2 ports detected
[ 1.031150] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.031157] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.032256] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.032261] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.032473] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.032474] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032475] usb usb3: Product: xHCI Host Controller
[ 1.032476] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.032477] usb usb3: SerialNumber: 0000:00:14.0
[ 1.032626] hub 3-0:1.0: USB hub found
[ 1.032651] hub 3-0:1.0: 4 ports detected
[ 1.033038] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.033041] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.033118] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.033119] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.033120] usb usb4: Product: xHCI Host Controller
[ 1.033121] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.033122] usb usb4: SerialNumber: 0000:00:14.0
[ 1.033261] hub 4-0:1.0: USB hub found
[ 1.033274] hub 4-0:1.0: 4 ports detected
[ 1.033656] ahci 0000:00:1f.2: version 3.0
[ 1.033839] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
[ 1.033842] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.043056] scsi host0: ahci
[ 1.043216] scsi host1: ahci
[ 1.043314] scsi host2: ahci
[ 1.043402] scsi host3: ahci
[ 1.043489] scsi host4: ahci
[ 1.043590] scsi host5: ahci
[ 1.043638] ata1: SATA max UDMA/133 abar m2048@0xd0618000 port 0xd0618100 irq 25
[ 1.043640] ata2: SATA max UDMA/133 abar m2048@0xd0618000 port 0xd0618180 irq 25
[ 1.043641] ata3: DUMMY
[ 1.043642] ata4: DUMMY
[ 1.043642] ata5: DUMMY
[ 1.043643] ata6: DUMMY
[ 1.043827] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.338107] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.358100] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.358344] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.358386] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.359263] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.359847] ata2.00: NCQ Send/Recv Log not supported
[ 1.359853] ata2.00: ATA-9: SAMSUNG SSD CM851 mSATA 32GB, FXM43D2Q, max UDMA/133
[ 1.359856] ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.360532] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.360639] ata2.00: NCQ Send/Recv Log not supported
[ 1.360695] ata2.00: configured for UDMA/133
[ 1.372716] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.372853] ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
[ 1.372858] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.378476] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x53 Err=0x04)
[ 1.378593] ata1.00: configured for UDMA/133
[ 1.379468] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 1.419764] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD CM85 3D2Q PQ: 0 ANSI: 5
[ 1.463619] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.463691] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 1.463817] sd 0:0:0:0: [sda] Write Protect is off
[ 1.463824] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.463924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.464008] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.464012] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.464044] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.465263] sdb: sdb1
[ 1.465694] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.467888] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 1.469487] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.488755] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.488760] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.489335] hub 1-1:1.0: USB hub found
[ 1.489440] hub 1-1:1.0: 6 ports detected
[ 1.506333] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.506338] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.506604] hub 2-1:1.0: USB hub found
[ 1.506680] hub 2-1:1.0: 8 ports detected
[ 1.515928] random: fast init done
[ 1.778129] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.794094] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.888529] usb 1-1.1: New USB device found, idVendor=138a, idProduct=0011
[ 1.888534] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.888537] usb 1-1.1: SerialNumber: 27cbb274d797
[ 1.894074] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[ 1.894090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
[ 1.911075] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[ 1.911080] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.962019] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 1.966029] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.075620] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129
[ 2.075625] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.075628] usb 1-1.3: Product: USB2.0-CRW
[ 2.075630] usb 1-1.3: Manufacturer: Generic
[ 2.075632] usb 1-1.3: SerialNumber: 20100201396000000
[ 2.083020] usbcore: registered new interface driver rtsx_usb
[ 2.154115] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[ 2.334038] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=644f
[ 2.334044] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.334047] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
[ 2.334049] usb 1-1.5: Manufacturer: CN0Y4TWT7248737U26H5A02
[ 2.918277] clocksource: Switched to clocksource tsc
[ 32.861882] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 32.946602] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 32.961769] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.968375] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 32.968604] systemd[1]: Detected architecture x86-64.
[ 32.970933] systemd[1]: Set hostname to <debian>.
[ 33.036645] systemd[1]: Reached target User and Group Name Lookups.
[ 33.036741] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 33.036782] systemd[1]: Listening on Journal Socket.
[ 33.036796] systemd[1]: Reached target Remote File Systems.
[ 33.036822] systemd[1]: Listening on udev Kernel Socket.
[ 33.036848] systemd[1]: Listening on udev Control Socket.
[ 33.036968] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 33.053861] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 33.063585] lp: driver loaded but no devices found
[ 33.066269] ppdev: user-space parallel port driver
[ 33.153732] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 33.153737] ACPI: Power Button [PWRB]
[ 33.153801] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 33.153804] ACPI: Sleep Button [SLPB]
[ 33.154734] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 33.154738] ACPI: Lid Switch [LID0]
[ 33.154810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 33.154813] ACPI: Power Button [PWRF]
[ 33.233050] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[ 33.233058] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.233064] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 33.233069] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.IAOE.GPIO) (20160831/utaddress-247)
[ 33.233073] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.233074] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 33.233078] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.IAOE.GPIO) (20160831/utaddress-247)
[ 33.233082] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.233083] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 33.233087] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.IAOE.GPIO) (20160831/utaddress-247)
[ 33.233091] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.233092] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 33.233114] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.236720] media: Linux media interface: v0.10
[ 33.237443] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.237488] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 33.239919] [drm] Initialized
[ 33.247142] Linux video capture interface: v2.00
[ 33.260747] ACPI: AC Adapter [ADP0] (off-line)
[ 33.266722] ACPI: Battery Slot [BAT0] (battery present)
[ 33.266925] wmi: Mapper loaded
[ 33.271730] Bluetooth: Core ver 2.22
[ 33.271742] NET: Registered protocol family 31
[ 33.271743] Bluetooth: HCI device and connection manager initialized
[ 33.271746] Bluetooth: HCI socket layer initialized
[ 33.271749] Bluetooth: L2CAP socket layer initialized
[ 33.271755] Bluetooth: SCO socket layer initialized
[ 33.273017] Intel(R) Wireless WiFi driver for Linux
[ 33.273018] Copyright(c) 2003- 2015 Intel Corporation
[ 33.273191] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 33.280639] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-2030-6.ucode
[ 33.280761] usbcore: registered new interface driver btusb
[ 33.280860] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 33.283563] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 33.290170] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:644f)
[ 33.291713] [drm] Memory usable by graphics device = 2048M
[ 33.291715] [drm] Replacing VGA console driver
[ 33.293000] Console: switching to colour dummy device 80x25
[ 33.293001] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 33.293002] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 33.293003] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 33.293004] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 33.294946] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4213: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[ 33.294949] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 33.294951] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=1 (0x4/0x0/0x0/0x0/0x0)
[ 33.294953] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
[ 33.294954] snd_hda_codec_cirrus hdaudioC0D0: inputs:
[ 33.294956] snd_hda_codec_cirrus hdaudioC0D0: Internal Mic=0x8
[ 33.294958] snd_hda_codec_cirrus hdaudioC0D0: Mic=0x6
[ 33.299840] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 33.299842] [drm] Driver supports precise vblank timestamp query.
[ 33.302166] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 33.305037] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 33.305039] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 33.305040] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 33.305041] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 33.307122] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 33.316808] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ 33.316812] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[ 33.316814] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[ 33.316816] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ 33.316915] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10
[ 33.316983] usbcore: registered new interface driver uvcvideo
[ 33.316984] USB Video Class driver (1.1.1)
[ 33.317474] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 33.338418] iTCO_vendor_support: vendor-support=0
[ 33.339461] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 33.339504] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 33.341131] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.353301] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 33.354382] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 33.354601] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 33.355051] dell_wmi: Detected Dell WMI interface version 0
[ 33.355115] input: Dell WMI hotkeys as /devices/virtual/input/input12
[ 33.364073] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 33.364083] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 33.368155] fbcon: inteldrmfb (fb0) is primary device
[ 33.368232] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 33.368344] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 33.368402] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 33.387625] intel_rapl: Found RAPL domain package
[ 33.387626] intel_rapl: Found RAPL domain core
[ 33.387627] intel_rapl: Found RAPL domain uncore
[ 33.387632] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 33.391129] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[ 33.463936] Adding 8244220k swap on /dev/sda7. Priority:-1 extents:1 across:8244220k SSFS
[ 33.464046] fuse init (API version 7.26)
[ 33.523568] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 33.536575] systemd-journald[354]: Received request to flush runtime journal from PID 1
[ 33.538130] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 33.542874] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 33.953021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.953021] Bluetooth: BNEP filters: protocol multicast
[ 33.953024] Bluetooth: BNEP socket layer initialized
[ 34.237225] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 34.240599] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 34.243676] Console: switching to colour frame buffer device 170x48
[ 34.247331] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 34.248742] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.256657] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.256743] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 34.262697] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 34.517816] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.525714] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.525801] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 34.587950] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 34.595051] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.602979] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.603067] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 34.859031] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.867020] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 34.867113] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 34.929009] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 35.018930] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 35.936265] Bluetooth: RFCOMM TTY layer initialized
[ 35.936271] Bluetooth: RFCOMM socket layer initialized
[ 35.936275] Bluetooth: RFCOMM ver 1.11
[ 36.183607] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 36.191533] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 36.191627] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 36.446300] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 36.454224] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 36.454313] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 36.515250] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 36.569951] wlp1s0: authenticate with 00:24:d4:e0:88:fc
[ 36.573826] wlp1s0: send auth to 00:24:d4:e0:88:fc (try 1/3)
[ 36.576482] wlp1s0: authenticated
[ 36.580517] wlp1s0: associate with 00:24:d4:e0:88:fc (try 1/3)
[ 36.584485] wlp1s0: RX AssocResp from 00:24:d4:e0:88:fc (capab=0x411 status=0 aid=5)
[ 36.603198] wlp1s0: associated
[ 36.603236] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 65.463669] random: crng init done
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
