Merci pour la réponse
Je donne l'intégralité du retour de la commande au cas où ça serait plus clair
[ 0.000000] Linux version 4.9.0-4-686 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fedf7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003fedf800-0x000000003fedffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003fee0000-0x000000003fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003fee3000-0x000000003feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003fef0000-0x000000003fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: HP Pavilion 061 EJ230AA-ABF w5257.fr/LITHIUM, BIOS 3.08 09/12/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3fedf max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f5f40-0x000f5f4f] mapped at [c00f5f40]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x05bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0591b000, 0x0591bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3543d000-0x36a15fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F80F0 000014 (v00 HP-CPC)
[ 0.000000] ACPI: RSDT 0x000000003FEE3040 000030 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000003FEE30C0 000074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0x000000003FEE3180 0053A3 (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003FEE0000 000040
[ 0.000000] ACPI: MCFG 0x000000003FEE8680 00003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x000000003FEE8580 000084 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003fedefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fedefff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003fedefff]
[ 0.000000] On node 0 totalpages: 261757
[ 0.000000] free_area_init_node: node 0, pgdat c57bd740, node_mem_map f6efe024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34529 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x3ff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @f6eaf000 s47948 r0 d29876 u77824
[ 0.000000] pcpu-alloc: s47948 r0 d29876 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259759
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686 root=UUID=ea69d9b1-2634-43fe-b292-ef2ff314d7a6 ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fedf)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1004920K/1047028K available (5688K kernel code, 637K rwdata, 1700K rodata, 712K init, 452K bss, 42108K reserved, 0K cma-reserved, 138116K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc57da000 - 0xc588c000 ( 712 kB)
.data : 0xc558e3e7 - 0xc57d8500 (2344 kB)
.text : 0xc5000000 - 0xc558e3e7 (5688 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f502e000 soft=f5030000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2800.853 MHz processor
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5601.70 BogoMIPS (lpj=11203412)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004061] ACPI: Core revision 20160831
[ 0.014333] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.014401] Security Framework initialized
[ 0.014403] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.014414] AppArmor: AppArmor disabled by boot time parameter
[ 0.014446] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.014450] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.014885] CPU: Physical Processor ID: 0
[ 0.014887] CPU: Processor Core ID: 0
[ 0.014895] mce: CPU supports 4 MCE banks
[ 0.014906] CPU0: Thermal monitoring enabled (TM1)
[ 0.014915] process: using mwait in idle threads
[ 0.014926] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.014929] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ 0.015235] Freeing SMP alternatives memory: 24K
[ 0.020010] ftrace: allocating 23687 entries in 47 pages
[ 0.032133] smpboot: Max logical packages: 2
[ 0.032143] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076000] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (family: 0xf, model: 0x4, stepping: 0x4)
[ 0.076000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.076000] ... version: 0
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 18
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 0000007fffffffff
[ 0.076000] ... fixed-purpose events: 0
[ 0.076000] ... event mask: 000000000003ffff
[ 0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076000] CPU 1 irqstacks, hard=f5150000 soft=f5152000
[ 0.076000] x86: Booting SMP configuration:
[ 0.076000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.166032] x86: Booted up 1 node, 2 CPUs
[ 0.166032] smpboot: Total of 2 processors activated (11203.67 BogoMIPS)
[ 0.166032] devtmpfs: initialized
[ 0.166032] PM: Registering ACPI NVS region [mem 0x3fee0000-0x3fee2fff] (12288 bytes)
[ 0.168034] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.168041] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.168117] pinctrl core: initialized pinctrl subsystem
[ 0.168318] NET: Registered protocol family 16
[ 0.180008] cpuidle: using governor ladder
[ 0.192007] cpuidle: using governor menu
[ 0.192111] ACPI: bus type PCI registered
[ 0.192115] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.192241] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.192245] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.192249] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.192250] PCI: Using MMCONFIG for extended config space
[ 0.192252] PCI: Using configuration type 1 for base access
[ 0.192426] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.192428] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.192429] mtrr: probably your BIOS does not setup all CPUs.
[ 0.192430] mtrr: corrected configuration.
[ 0.204079] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.204258] ACPI: Added _OSI(Module Device)
[ 0.204258] ACPI: Added _OSI(Processor Device)
[ 0.204258] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.204258] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.211930] ACPI: Interpreter enabled
[ 0.211984] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.211986] ACPI: Using IOAPIC for interrupt routing
[ 0.212049] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.221659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.221668] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.221678] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.221684] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.221772] acpi PNP0A08:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.221775] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.221778] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.221781] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.221784] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.221786] acpi PNP0A08:00: host bridge window [mem 0x3ff00000-0xfebfffff window] (ignored)
[ 0.221788] PCI: root bus 00: using default resources
[ 0.222183] PCI host bridge to bus 0000:00
[ 0.222187] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.222190] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.222194] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.222208] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.222425] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.222493] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.222700] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.222723] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.222816] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.222921] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.223016] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.223065] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.223190] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.223283] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.223332] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.223455] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.223546] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.223595] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.223721] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.223813] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.223861] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.223985] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.224094] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.224115] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.224207] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.224303] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.224399] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.224550] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.224648] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.224749] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.224758] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.224764] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.224768] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 007f)
[ 0.224965] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.224982] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.224993] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.225004] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.225015] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.225026] pci 0000:00:1f.1: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.225050] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.225052] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.225055] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.225057] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.225238] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.225255] pci 0000:00:1f.2: reg 0x10: [io 0xfa00-0xfa07]
[ 0.225265] pci 0000:00:1f.2: reg 0x14: [io 0xf900-0xf903]
[ 0.225274] pci 0000:00:1f.2: reg 0x18: [io 0xf800-0xf807]
[ 0.225284] pci 0000:00:1f.2: reg 0x1c: [io 0xf700-0xf703]
[ 0.225294] pci 0000:00:1f.2: reg 0x20: [io 0xf600-0xf60f]
[ 0.225304] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffe000-0xfdffe3ff]
[ 0.225347] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.225527] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.225587] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.225864] pci 0000:01:00.0: [10de:0162] type 00 class 0x030000
[ 0.225880] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.225894] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.225907] pci 0000:01:00.0: reg 0x1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.225923] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226055] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.226064] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.226069] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.226073] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.226079] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.226160] pci 0000:02:01.0: [1106:3044] type 00 class 0x0c0010
[ 0.226180] pci 0000:02:01.0: reg 0x10: [mem 0xfddff000-0xfddff7ff]
[ 0.226193] pci 0000:02:01.0: reg 0x14: [io 0xef00-0xef7f]
[ 0.226284] pci 0000:02:01.0: supports D2
[ 0.226287] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
[ 0.226402] pci 0000:02:05.0: [1131:7134] type 00 class 0x048000
[ 0.226422] pci 0000:02:05.0: reg 0x10: [mem 0xfddfe000-0xfddfe3ff]
[ 0.226519] pci 0000:02:05.0: supports D1 D2
[ 0.226611] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
[ 0.226631] pci 0000:02:08.0: reg 0x10: [mem 0xfddfd000-0xfddfdfff]
[ 0.226643] pci 0000:02:08.0: reg 0x14: [io 0xee00-0xee3f]
[ 0.226728] pci 0000:02:08.0: supports D1 D2
[ 0.226731] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226859] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.226864] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.226869] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.226876] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.226879] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.226882] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.226896] pci_bus 0000:00: on NUMA node 0
[ 0.227976] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.228134] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.228279] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.228424] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.228566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.228710] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.228855] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.229001] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.229194] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.229387] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.229387] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.229387] vgaarb: loaded
[ 0.229387] vgaarb: bridge control possible 0000:01:00.0
[ 0.229387] PCI: Using ACPI for IRQ routing
[ 0.229883] PCI: pci_cache_line_size set to 64 bytes
[ 0.229940] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.229943] e820: reserve RAM buffer [mem 0x3fedf800-0x3fffffff]
[ 0.230395] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.230403] hpet clockevent registered
[ 0.230409] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.230414] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.230421] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.233029] clocksource: Switched to clocksource hpet
[ 0.246317] VFS: Disk quotas dquot_6.6.0
[ 0.246357] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.246523] pnp: PnP ACPI init
[ 0.246914] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.246918] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.246922] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.246929] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247005] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.247704] pnp 00:02: [dma 3]
[ 0.247789] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.247944] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.248118] system 00:04: [io 0x0400-0x04bf] could not be reserved
[ 0.248123] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248596] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.248601] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248969] system 00:06: [mem 0x000cee00-0x000cffff] has been reserved
[ 0.248973] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.248977] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.248980] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.248983] system 00:06: [mem 0x3fee0000-0x3fefffff] could not be reserved
[ 0.248987] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.248990] system 00:06: [mem 0x00100000-0x3fedffff] could not be reserved
[ 0.248994] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.248997] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.249000] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.249004] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.249007] system 00:06: [mem 0x000e0000-0x000effff] has been reserved
[ 0.249012] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.249025] pnp: PnP ACPI: found 7 devices
[ 0.249030] PnPBIOS: Disabled
[ 0.288113] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.288149] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.288153] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.288157] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.288162] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.288166] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.288173] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.288177] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.288183] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.288188] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.288197] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.288200] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.288203] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.288206] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.288208] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.288211] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.288214] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.288216] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.288219] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.288221] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.288359] NET: Registered protocol family 2
[ 0.288665] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.288686] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.288721] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.288758] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288768] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288835] NET: Registered protocol family 1
[ 2.288021] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.288286] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.288305] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 2.288311] PCI: CLS 32 bytes, default 64
[ 2.288409] Unpacking initramfs...
[ 2.960424] Freeing initrd memory: 22372K
[ 2.961336] audit: initializing netlink subsys (disabled)
[ 2.961371] audit: type=2000 audit(1508687967.956:1): initialized
[ 2.961876] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.961926] zbud: loaded
[ 2.963070] bounce: pool size: 64 pages
[ 2.963099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.963147] io scheduler noop registered
[ 2.963149] io scheduler deadline registered
[ 2.963178] io scheduler cfq registered (default)
[ 2.963716] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.963730] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.963939] GHES: HEST is not enabled!
[ 2.964031] isapnp: Scanning for PnP cards...
[ 3.317262] isapnp: No Plug & Play device found
[ 3.317385] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.318119] Linux agpgart interface v0.103
[ 3.318526] Failed to find cpu0 device node
[ 3.318568] Unable to detect cache hierarchy from DT for CPU 0
[ 3.318640] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.318641] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.319345] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.319554] mousedev: PS/2 mouse device common for all mice
[ 3.319644] rtc_cmos 00:01: RTC can wake from S4
[ 3.319816] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.319845] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.319917] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.320830] NET: Registered protocol family 10
[ 3.321231] mip6: Mobile IPv6
[ 3.321234] NET: Registered protocol family 17
[ 3.321238] mpls_gso: MPLS GSO support
[ 3.321580] microcode: sig=0xf44, pf=0x10, revision=0x6
[ 3.321653] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.321660] Using IPI No-Shortcut mode
[ 3.321887] registered taskstats version 1
[ 3.321909] zswap: loaded using pool lzo/zbud
[ 3.322036] ima: No TPM chip found, activating TPM-bypass!
[ 3.322418] rtc_cmos 00:01: setting system clock to 2017-10-22 15:59:29 UTC (1508687969)
[ 3.322503] PM: Hibernation image not present or could not be loaded.
[ 3.322935] Freeing unused kernel memory: 712K
[ 3.322986] Write protecting the kernel text: 5692k
[ 3.323033] Write protecting the kernel read-only data: 1704k
[ 3.349595] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.349765] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.349802] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.350471] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.351711] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.351808] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.351847] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.351922] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.351939] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.351979] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.352001] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.407479] SCSI subsystem initialized
[ 3.411238] ACPI: bus type USB registered
[ 3.411298] usbcore: registered new interface driver usbfs
[ 3.411327] usbcore: registered new interface driver hub
[ 3.411383] usbcore: registered new device driver usb
[ 3.412801] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.413471] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.413750] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.413763] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.413775] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.413827] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 3.413919] ehci-pci: EHCI PCI platform driver
[ 3.419118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.419122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.419125] usb usb1: Product: UHCI Host Controller
[ 3.419127] usb usb1: Manufacturer: Linux 4.9.0-4-686 uhci_hcd
[ 3.419130] usb usb1: SerialNumber: 0000:00:1d.0
[ 3.420315] hub 1-0:1.0: USB hub found
[ 3.420510] hub 1-0:1.0: 2 ports detected
[ 3.421708] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.421720] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.421730] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.421769] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 3.422200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.422203] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.422206] usb usb2: Product: UHCI Host Controller
[ 3.422208] usb usb2: Manufacturer: Linux 4.9.0-4-686 uhci_hcd
[ 3.422211] usb usb2: SerialNumber: 0000:00:1d.1
[ 3.422737] hub 2-0:1.0: USB hub found
[ 3.422750] hub 2-0:1.0: 2 ports detected
[ 3.424916] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.424929] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.424940] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.424981] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 3.425398] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.425401] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.425404] usb usb3: Product: UHCI Host Controller
[ 3.425406] usb usb3: Manufacturer: Linux 4.9.0-4-686 uhci_hcd
[ 3.425408] usb usb3: SerialNumber: 0000:00:1d.2
[ 3.425579] libata version 3.00 loaded.
[ 3.427255] hub 3-0:1.0: USB hub found
[ 3.427269] hub 3-0:1.0: 2 ports detected
[ 3.427919] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.427933] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.427943] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 3.427982] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 3.428152] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.428155] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.428157] usb usb4: Product: UHCI Host Controller
[ 3.428160] usb usb4: Manufacturer: Linux 4.9.0-4-686 uhci_hcd
[ 3.428162] usb usb4: SerialNumber: 0000:00:1d.3
[ 3.428457] hub 4-0:1.0: USB hub found
[ 3.428470] hub 4-0:1.0: 2 ports detected
[ 3.433498] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 3.433501] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.433939] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.433957] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.437871] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 3.438668] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 3.452594] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.452738] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.452741] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.452743] usb usb5: Product: EHCI Host Controller
[ 3.452746] usb usb5: Manufacturer: Linux 4.9.0-4-686 ehci_hcd
[ 3.452748] usb usb5: SerialNumber: 0000:00:1d.7
[ 3.453353] hub 5-0:1.0: USB hub found
[ 3.453369] hub 5-0:1.0: 8 ports detected
[ 3.480154] hub 1-0:1.0: USB hub found
[ 3.480171] hub 1-0:1.0: 2 ports detected
[ 3.500061] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.500163] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.500166] ACPI: Thermal Zone [THRM] (40 C)
[ 3.512164] hub 2-0:1.0: USB hub found
[ 3.512180] hub 2-0:1.0: 2 ports detected
[ 3.524548] e100 0000:02:08.0 eth0: addr 0xfddfd000, irq 20, MAC addr 00:13:d4:b0:09:96
[ 3.526041] e100 0000:02:08.0 enp2s8: renamed from eth0
[ 3.540169] hub 3-0:1.0: USB hub found
[ 3.540664] hub 3-0:1.0: 2 ports detected
[ 3.568141] hub 4-0:1.0: USB hub found
[ 3.568156] hub 4-0:1.0: 2 ports detected
[ 3.568497] ata_piix 0000:00:1f.1: version 2.13
[ 3.570764] scsi host0: ata_piix
[ 3.571526] scsi host1: ata_piix
[ 3.571655] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 3.571657] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 3.571855] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.572805] ata2: port disabled--ignoring
[ 3.573563] scsi host2: ata_piix
[ 3.573737] scsi host3: ata_piix
[ 3.573853] ata3: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
[ 3.573855] ata4: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
[ 3.574088] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.743250] ata3.00: ATA-7: SAMSUNG SP2004C, VM100-33, max UDMA7
[ 3.743254] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.764253] ata3.00: configured for UDMA/133
[ 3.768318] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H552D, HP06, max UDMA/33
[ 3.812220] ata1.00: configured for UDMA/33
[ 3.813678] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552D HP06 PQ: 0 ANSI: 5
[ 3.825379] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2004C 0-33 PQ: 0 ANSI: 5
[ 3.859192] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 3.859283] sd 2:0:0:0: [sda] Write Protect is off
[ 3.859288] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.859542] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.877582] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.877586] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.878234] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.892805] sda: sda1 sda2 < sda5 >
[ 3.894193] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.968046] tsc: Refined TSC clocksource calibration: 2800.795 MHz
[ 3.968055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285f2ff1e47, max_idle_ns: 440795324286 ns
[ 3.976036] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 4.032174] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800005d4b61, S400
[ 4.180066] usb 1-1: New USB device found, idVendor=046d, idProduct=08f6
[ 4.180070] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.180073] usb 1-1: Product: Camera
[ 4.992111] clocksource: Switched to clocksource tsc
[ 5.016021] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 5.171057] random: fast init done
[ 5.182068] usb 2-1: config 1 has an invalid interface number: 1 but max is 0
[ 5.182071] usb 2-1: config 1 has no interface number 0
[ 5.195068] usb 2-1: New USB device found, idVendor=1267, idProduct=0210
[ 5.195072] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.195074] usb 2-1: Product: PS/2+USB Mouse
[ 5.200379] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.217220] usbcore: registered new interface driver usbhid
[ 5.217222] usbhid: USB HID core driver
[ 5.219422] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.1/0003:1267:0210.0001/input/input1
[ 5.219861] hid-generic 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1/input1
[ 5.820022] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 6.005060] usb 4-1: New USB device found, idVendor=058f, idProduct=9360
[ 6.005064] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.005066] usb 4-1: Product: USB Reader
[ 6.005068] usb 4-1: Manufacturer:
[ 6.005071] usb 4-1: SerialNumber: 2004888
[ 6.010909] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 6.011059] scsi host4: usb-storage 4-1:1.0
[ 6.011230] usbcore: registered new interface driver usb-storage
[ 6.011854] usbcore: registered new interface driver uas
[ 6.624039] floppy0: no floppy controllers found
[ 6.624052] work still pending
[ 6.684984] PM: Starting manual resume from disk
[ 6.684990] PM: Hibernation image partition 8:5 present
[ 6.684991] PM: Looking for hibernation image.
[ 6.685256] PM: Image not found (code -22)
[ 6.685258] PM: Hibernation image not present or could not be loaded.
[ 6.896026] usb 5-2: new high-speed USB device number 5 using ehci-pci
[ 6.938606] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.044139] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 7.044836] usb 5-2: New USB device found, idVendor=03f0, idProduct=c511
[ 7.044840] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.044843] usb 5-2: Product: ENVY 4500 series
[ 7.044845] usb 5-2: Manufacturer: HP
[ 7.044848] usb 5-2: SerialNumber: CN3CU2T84N05X4
[ 7.047123] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 7.050114] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 7.053112] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 7.098120] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.103111] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 7.110477] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 7.115124] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 8.127705] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.269555] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 8.269784] systemd[1]: Detected architecture x86.
[ 8.270174] systemd[1]: Set hostname to <debian>.
[ 9.092167] systemd[1]: Listening on Journal Socket.
[ 9.092298] systemd[1]: Reached target Remote File Systems.
[ 9.092379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.092442] systemd[1]: Listening on Syslog Socket.
[ 9.092773] systemd[1]: Created slice System Slice.
[ 9.110858] systemd[1]: Starting Set the console keyboard layout...
[ 9.267434] systemd[1]: Starting Load Kernel Modules...
[ 9.390694] random: crng init done
[ 9.634478] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.750445] systemd-journald[209]: Received request to flush runtime journal from PID 1
[ 9.781568] lp: driver loaded but no devices found
[ 9.928637] ppdev: user-space parallel port driver
[ 9.943783] parport_pc 00:02: reported by Plug and Play ACPI
[ 9.943894] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 10.040159] lp0: using parport0 (interrupt-driven).
[ 11.301026] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 11.301035] ACPI: Power Button [PWRB]
[ 11.301169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.301173] ACPI: Power Button [PWRF]
[ 11.363782] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.381428] intel_rng: FWH not detected
[ 11.668500] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20160831/utaddress-247)
[ 11.668511] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000428 (\PM1K) (20160831/utaddress-247)
[ 11.668518] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042A-0x000000000000042B (\GPE1) (20160831/utaddress-247)
[ 11.668526] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.668530] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20160831/utaddress-247)
[ 11.668536] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.668538] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x00000000000004AC-0x00000000000004AF (\GPIV) (20160831/utaddress-247)
[ 11.668544] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO) (20160831/utaddress-247)
[ 11.668550] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.668552] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.829516] leds_ss4200: no LED devices found
[ 11.878773] media: Linux media interface: v0.10
[ 11.903703] Linux video capture interface: v2.00
[ 12.137538] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 12.260323] [drm] Initialized
[ 12.280993] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 12.281074] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 12.281158] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 12.281234] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 12.281308] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 12.281383] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 12.390465] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 12.390741] saa7134: saa7134[0]: found at 0000:02:05.0, rev: 1, irq: 17, latency: 32, mmio: 0xfddfe000
[ 12.390750] saa7134: saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM [card=100,autodetected]
[ 12.390767] saa7134: saa7134[0]: board init: gpio is 0
[ 12.425574] wmi: Mapper loaded
[ 12.504692] snd_hda_codec_realtek hdaudioC0D2: ALC882: SKU not ready 0x411111f0
[ 12.505280] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC882: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.505284] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.505287] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.505289] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 12.505292] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 12.505294] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 12.505297] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 12.505300] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 12.505302] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 12.505305] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 12.505307] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
[ 12.533293] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 12.537324] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 12.537485] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 12.556051] saa7134: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 12.556054] saa7134: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 12.556056] saa7134: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
[ 12.556057] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556059] saa7134: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
[ 12.556060] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556062] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556063] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556064] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556066] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556067] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556069] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556070] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556071] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556073] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.556074] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.684139] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 12.888020] tuner-simple 1-0061: creating new instance
[ 12.888024] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 12.936430] saa7134: saa7134[0]: registered device video0 [v4l2]
[ 12.936887] saa7134: saa7134[0]: registered device vbi0
[ 12.937332] saa7134: saa7134[0]: registered device radio0
[ 12.999273] iTCO_vendor_support: vendor-support=0
[ 13.099908] saa7134_dvb: dvb_init() allocating 1 frontend
[ 13.212026] tuner-simple 1-0061: attaching existing instance
[ 13.212031] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 13.212035] DVB: registering new adapter (saa7134[0])
[ 13.212042] saa7134 0000:02:05.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 13.273394] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.273467] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 13.273673] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.292750] tda1004x: setting up plls for 53MHz sampling clock
[ 13.630562] nouveau 0000:01:00.0: NVIDIA NV44 (044200a2)
[ 13.664507] gspca_main: v2.14.0 registered
[ 13.827407] nouveau 0000:01:00.0: bios: version 05.44.02.37.06
[ 13.839038] nouveau 0000:01:00.0: fb: 64 MiB DDR1
[ 13.918108] [TTM] Zone kernel: Available graphics memory: 444956 kiB
[ 13.918110] [TTM] Zone highmem: Available graphics memory: 514014 kiB
[ 13.918111] [TTM] Initializing pool allocator
[ 13.918141] nouveau 0000:01:00.0: DRM: VRAM: 60 MiB
[ 13.918144] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[ 13.918150] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[ 13.918153] nouveau 0000:01:00.0: DRM: DCB version 3.0
[ 13.918156] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[ 13.918160] nouveau 0000:01:00.0: DRM: DCB outp 01: 020223f1 00c0c070
[ 13.918164] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[ 13.918167] nouveau 0000:01:00.0: DRM: DCB conn 01: 0210
[ 13.918169] nouveau 0000:01:00.0: DRM: DCB conn 02: 0211
[ 13.918172] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[ 13.918175] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[ 13.918565] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 13.940182] gspca_main: STV06xx-2.14.0 probing 046d:08f6
[ 13.940187] gspca_stv06xx: st6422 sensor detected
[ 13.981301] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.981314] [drm] Driver supports precise vblank timestamp query.
[ 13.987916] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 13.987931] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 1)
[ 14.056297] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo f57a9800
[ 14.056451] fbcon: nouveaufb (fb0) is primary device
[ 14.150227] Console: switching to colour frame buffer device 160x64
[ 14.152340] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 14.168022] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 14.251741] input: STV06xx as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/input/input8
[ 14.252045] usbcore: registered new interface driver STV06xx
[ 14.560057] floppy0: no floppy controllers found
[ 14.560072] work still pending
[ 14.580902] Adding 1046524k swap on /dev/sda5. Priority:-1 extents:1 across:1046524k FS
[ 14.684691] usbcore: registered new interface driver snd-usb-audio
[ 14.786463] tuner-simple 1-0061: i2c i/o error: rc == -5 (should be 4)
[ 14.786658] tuner-simple 1-0061: i2c i/o error: rc == -5 (should be 4)
[ 14.791789] tuner-simple 1-0061: i2c i/o error: rc == -5 (should be 4)
[ 15.584021] tda1004x: timeout waiting for DSP ready
[ 15.644019] tda1004x: found firmware revision 0 -- invalid
[ 15.644022] tda1004x: trying to boot from eeprom
[ 18.004022] tda1004x: timeout waiting for DSP ready
[ 18.064022] tda1004x: found firmware revision 0 -- invalid
[ 18.064029] tda1004x: waiting for firmware upload...
[ 19.007234] saa7134 0000:02:05.0: firmware: direct-loading firmware dvb-fe-tda10046.fw
[ 23.531581] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 23.553007] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 23.556161] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[ 23.556322] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[ 25.404654] usblp 5-2:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC511
[ 25.404703] usbcore: registered new interface driver usblp
[ 30.908128] usblp0: removed
[ 30.909254] usblp 5-2:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC511
[ 38.476022] tda1004x: found firmware revision 20 -- ok
[ 38.826753] fuse init (API version 7.26)
[ 39.025081] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded
[ 39.025136] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xfddfe000 irq 17 registered as card -1
[ 494.053144] device-mapper: uevent: version 1.0.3
[ 494.053268] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
Je viens d'installer le paquet linux-image-686-pae
Je vais redémarrer pour voir en croisant les doigts !
Edit : je suis sur le noyau 686-pae et voici le retour de la commande dmesg, je ne vois plus de ligne en rouge
Linux version 4.9.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fedf7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003fedf800-0x000000003fedffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003fee0000-0x000000003fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003fee3000-0x000000003feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003fef0000-0x000000003fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: HP Pavilion 061 EJ230AA-ABF w5257.fr/LITHIUM, BIOS 3.08 09/12/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3fedf max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f5f40-0x000f5f4f] mapped at [c00f5f40]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x11dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x119c7000, 0x119c7fff] PGTABLE
[ 0.000000] BRK [0x119c8000, 0x119c9fff] PGTABLE
[ 0.000000] BRK [0x119ca000, 0x119cafff] PGTABLE
[ 0.000000] BRK [0x119cb000, 0x119cbfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3540b000-0x369fcfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F80F0 000014 (v00 HP-CPC)
[ 0.000000] ACPI: RSDT 0x000000003FEE3040 000030 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000003FEE30C0 000074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0x000000003FEE3180 0053A3 (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003FEE0000 000040
[ 0.000000] ACPI: MCFG 0x000000003FEE8680 00003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x000000003FEE8580 000084 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 132MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000003fedefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fedefff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003fedefff]
[ 0.000000] On node 0 totalpages: 261757
[ 0.000000] free_area_init_node: node 0, pgdat d17e67c0, node_mem_map f70fe024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34017 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x3ff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f70ab000 s50764 r0 d31156 u81920
[ 0.000000] pcpu-alloc: s50764 r0 d31156 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259754
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686-pae root=UUID=ea69d9b1-2634-43fe-b292-ef2ff314d7a6 ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003fedf)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1004116K/1047028K available (5825K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 42912K reserved, 0K cma-reserved, 136068K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xd1803000 - 0xd18bf000 ( 752 kB)
.data : 0xd15b0b14 - 0xd1801b00 (2371 kB)
.text : 0xd1000000 - 0xd15b0b14 (5826 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f5030000 soft=f5032000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2800.896 MHz processor
[ 0.008017] Calibrating delay loop (skipped), value calculated using timer frequency.. 5601.79 BogoMIPS (lpj=11203584)
[ 0.008022] pid_max: default: 32768 minimum: 301
[ 0.008063] ACPI: Core revision 20160831
[ 0.018543] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.018611] Security Framework initialized
[ 0.018613] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.018624] AppArmor: AppArmor disabled by boot time parameter
[ 0.018658] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.018660] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.019093] CPU: Physical Processor ID: 0
[ 0.019095] CPU: Processor Core ID: 0
[ 0.019104] mce: CPU supports 4 MCE banks
[ 0.019114] CPU0: Thermal monitoring enabled (TM1)
[ 0.019123] process: using mwait in idle threads
[ 0.019134] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.019136] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ 0.019483] Freeing SMP alternatives memory: 24K
[ 0.024011] ftrace: allocating 24038 entries in 47 pages
[ 0.036136] smpboot: Max logical packages: 2
[ 0.036146] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080000] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (family: 0xf, model: 0x4, stepping: 0x4)
[ 0.080000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.080000] ... version: 0
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 18
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 0000007fffffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 000000000003ffff
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] CPU 1 irqstacks, hard=f5150000 soft=f5152000
[ 0.080000] x86: Booting SMP configuration:
[ 0.080000] .... node #0, CPUs: #1
[ 0.012000] Initializing CPU#1
[ 0.170036] x86: Booted up 1 node, 2 CPUs
[ 0.170036] smpboot: Total of 2 processors activated (11203.85 BogoMIPS)
[ 0.170036] devtmpfs: initialized
[ 0.170036] PM: Registering ACPI NVS region [mem 0x3fee0000-0x3fee2fff] (12288 bytes)
[ 0.172052] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.172057] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.172138] pinctrl core: initialized pinctrl subsystem
[ 0.172340] NET: Registered protocol family 16
[ 0.184008] cpuidle: using governor ladder
[ 0.196007] cpuidle: using governor menu
[ 0.196077] ACPI: bus type PCI registered
[ 0.196080] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.196197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.196201] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.196205] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.196206] PCI: Using MMCONFIG for extended config space
[ 0.196208] PCI: Using configuration type 1 for base access
[ 0.196380] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.196382] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.196383] mtrr: probably your BIOS does not setup all CPUs.
[ 0.196384] mtrr: corrected configuration.
[ 0.208082] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.208256] ACPI: Added _OSI(Module Device)
[ 0.208256] ACPI: Added _OSI(Processor Device)
[ 0.208256] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.208256] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.215875] ACPI: Interpreter enabled
[ 0.215926] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.215929] ACPI: Using IOAPIC for interrupt routing
[ 0.215981] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.225518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.225528] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.225538] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.225543] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.226017] PCI host bridge to bus 0000:00
[ 0.226021] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.226024] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.226027] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.226030] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.226033] pci_bus 0000:00: root bus resource [mem 0x3ff00000-0xfebfffff window]
[ 0.226036] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.226052] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.226265] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.226333] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.226540] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.226563] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.226656] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.226760] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.226852] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.226901] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.227024] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.227114] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.227163] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.227286] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.227377] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.227425] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.227547] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.227637] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.227685] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.227808] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.227905] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.227925] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.228026] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.228121] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.228212] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.228363] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.228460] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.228561] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.228571] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.228577] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.228582] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 007f)
[ 0.228778] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.228794] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.228806] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.228817] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.228828] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.228839] pci 0000:00:1f.1: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.228862] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.228865] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.228867] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.228869] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.229040] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.229058] pci 0000:00:1f.2: reg 0x10: [io 0xfa00-0xfa07]
[ 0.229068] pci 0000:00:1f.2: reg 0x14: [io 0xf900-0xf903]
[ 0.229078] pci 0000:00:1f.2: reg 0x18: [io 0xf800-0xf807]
[ 0.229088] pci 0000:00:1f.2: reg 0x1c: [io 0xf700-0xf703]
[ 0.229098] pci 0000:00:1f.2: reg 0x20: [io 0xf600-0xf60f]
[ 0.229108] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffe000-0xfdffe3ff]
[ 0.229149] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.229327] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.229386] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.229657] pci 0000:01:00.0: [10de:0162] type 00 class 0x030000
[ 0.229673] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.229687] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.229700] pci 0000:01:00.0: reg 0x1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.229717] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.229847] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.229857] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.229861] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.229865] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.229871] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.229950] pci 0000:02:01.0: [1106:3044] type 00 class 0x0c0010
[ 0.229971] pci 0000:02:01.0: reg 0x10: [mem 0xfddff000-0xfddff7ff]
[ 0.229984] pci 0000:02:01.0: reg 0x14: [io 0xef00-0xef7f]
[ 0.230074] pci 0000:02:01.0: supports D2
[ 0.230077] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
[ 0.230188] pci 0000:02:05.0: [1131:7134] type 00 class 0x048000
[ 0.230209] pci 0000:02:05.0: reg 0x10: [mem 0xfddfe000-0xfddfe3ff]
[ 0.230305] pci 0000:02:05.0: supports D1 D2
[ 0.230391] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
[ 0.230411] pci 0000:02:08.0: reg 0x10: [mem 0xfddfd000-0xfddfdfff]
[ 0.230423] pci 0000:02:08.0: reg 0x14: [io 0xee00-0xee3f]
[ 0.230508] pci 0000:02:08.0: supports D1 D2
[ 0.230510] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.230638] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.230643] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.230648] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.230656] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.230659] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.230662] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.230665] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.230668] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.230671] pci 0000:00:1e.0: bridge window [mem 0x3ff00000-0xfebfffff window] (subtractive decode)
[ 0.230685] pci_bus 0000:00: on NUMA node 0
[ 0.231767] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.231911] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.232067] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.232212] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.232355] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.232498] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.232641] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.232785] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.232975] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.233197] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.233197] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.233197] vgaarb: loaded
[ 0.233197] vgaarb: bridge control possible 0000:01:00.0
[ 0.233197] PCI: Using ACPI for IRQ routing
[ 0.233885] PCI: pci_cache_line_size set to 64 bytes
[ 0.233947] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.233950] e820: reserve RAM buffer [mem 0x3fedf800-0x3fffffff]
[ 0.234400] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.234408] hpet clockevent registered
[ 0.234414] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.234419] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.234425] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.237029] clocksource: Switched to clocksource hpet
[ 0.250772] VFS: Disk quotas dquot_6.6.0
[ 0.250813] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.250983] pnp: PnP ACPI init
[ 0.251378] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.251383] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.251388] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.251395] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251476] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.252195] pnp 00:02: [dma 3]
[ 0.252277] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.252428] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.252574] system 00:04: [io 0x0400-0x04bf] could not be reserved
[ 0.252579] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253048] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.253054] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253416] system 00:06: [mem 0x000cee00-0x000cffff] has been reserved
[ 0.253420] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.253423] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.253427] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.253430] system 00:06: [mem 0x3fee0000-0x3fefffff] could not be reserved
[ 0.253434] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.253437] system 00:06: [mem 0x00100000-0x3fedffff] could not be reserved
[ 0.253441] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253445] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.253448] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.253452] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.253455] system 00:06: [mem 0x000e0000-0x000effff] has been reserved
[ 0.253460] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253474] pnp: PnP ACPI: found 7 devices
[ 0.253479] PnPBIOS: Disabled
[ 0.292574] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.292612] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.292617] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.292621] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.292626] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.292630] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.292637] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.292641] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.292647] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.292651] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.292660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.292663] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.292666] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.292668] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.292671] pci_bus 0000:00: resource 8 [mem 0x3ff00000-0xfebfffff window]
[ 0.292674] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.292677] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.292679] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.292682] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.292685] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.292687] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.292690] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.292693] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.292695] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.292698] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.292700] pci_bus 0000:02: resource 8 [mem 0x3ff00000-0xfebfffff window]
[ 0.292841] NET: Registered protocol family 2
[ 0.293137] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.293159] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.293194] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.293233] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293330] NET: Registered protocol family 1
[ 2.292021] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.292285] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.292304] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 2.292310] PCI: CLS 32 bytes, default 64
[ 2.292408] Unpacking initramfs...
[ 2.968541] Freeing initrd memory: 22472K
[ 2.969395] audit: initializing netlink subsys (disabled)
[ 2.969428] audit: type=2000 audit(1508688755.964:1): initialized
[ 2.970012] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.970061] zbud: loaded
[ 2.971189] bounce: pool size: 64 pages
[ 2.971219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.971275] io scheduler noop registered
[ 2.971276] io scheduler deadline registered
[ 2.971305] io scheduler cfq registered (default)
[ 2.971813] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.971829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.972062] GHES: HEST is not enabled!
[ 2.972126] isapnp: Scanning for PnP cards...
[ 3.325348] isapnp: No Plug & Play device found
[ 3.325497] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.326281] Linux agpgart interface v0.103
[ 3.326967] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.326968] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.327676] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.327901] mousedev: PS/2 mouse device common for all mice
[ 3.327990] rtc_cmos 00:01: RTC can wake from S4
[ 3.328192] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.328221] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.328269] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.329182] NET: Registered protocol family 10
[ 3.329563] mip6: Mobile IPv6
[ 3.329566] NET: Registered protocol family 17
[ 3.329571] mpls_gso: MPLS GSO support
[ 3.329903] microcode: sig=0xf44, pf=0x10, revision=0x6
[ 3.329984] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.329990] Using IPI No-Shortcut mode
[ 3.330250] registered taskstats version 1
[ 3.330273] zswap: loaded using pool lzo/zbud
[ 3.330409] ima: No TPM chip found, activating TPM-bypass!
[ 3.330799] rtc_cmos 00:01: setting system clock to 2017-10-22 16:12:37 UTC (1508688757)
[ 3.330882] PM: Hibernation image not present or could not be loaded.
[ 3.331404] Freeing unused kernel memory: 752K
[ 3.331508] Write protecting the kernel text: 5828k
[ 3.331595] Write protecting the kernel read-only data: 1724k
[ 3.331597] NX-protecting the kernel data: 4412k
[ 3.331839] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.358758] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.359273] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.359444] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.359482] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.361109] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.361166] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.361209] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.361282] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.361300] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.361342] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.361363] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.411450] ACPI: bus type USB registered
[ 3.411508] usbcore: registered new interface driver usbfs
[ 3.411537] usbcore: registered new interface driver hub
[ 3.419428] SCSI subsystem initialized
[ 3.422960] usbcore: registered new device driver usb
[ 3.424115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.424620] ehci-pci: EHCI PCI platform driver
[ 3.424911] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.424943] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.424956] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.428884] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 3.430596] libata version 3.00 loaded.
[ 3.431542] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 3.444033] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.444149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.444152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.444155] usb usb1: Product: EHCI Host Controller
[ 3.444157] usb usb1: Manufacturer: Linux 4.9.0-4-686-pae ehci_hcd
[ 3.444159] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.444466] hub 1-0:1.0: USB hub found
[ 3.444488] hub 1-0:1.0: 8 ports detected
[ 3.445304] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.445318] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.445327] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.445352] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 3.445477] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.445481] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.445483] usb usb2: Product: UHCI Host Controller
[ 3.445485] usb usb2: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 3.445487] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.445758] hub 2-0:1.0: USB hub found
[ 3.445771] hub 2-0:1.0: 2 ports detected
[ 3.446149] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.446158] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.446166] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.446201] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 3.446660] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.446663] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.446666] usb usb3: Product: UHCI Host Controller
[ 3.446668] usb usb3: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 3.446670] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.446937] hub 3-0:1.0: USB hub found
[ 3.446950] hub 3-0:1.0: 2 ports detected
[ 3.447362] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.447372] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.447379] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.447417] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 3.447768] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.447771] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.447773] usb usb4: Product: UHCI Host Controller
[ 3.447775] usb usb4: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 3.447778] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.448118] hub 4-0:1.0: USB hub found
[ 3.448143] hub 4-0:1.0: 2 ports detected
[ 3.448386] ata_piix 0000:00:1f.1: version 2.13
[ 3.450199] scsi host0: ata_piix
[ 3.450617] scsi host1: ata_piix
[ 3.450740] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 3.450743] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 3.450933] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.454243] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 3.454245] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.454402] ata2: port disabled--ignoring
[ 3.454480] scsi host2: ata_piix
[ 3.454675] scsi host3: ata_piix
[ 3.454793] ata3: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
[ 3.454796] ata4: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
[ 3.455059] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.455073] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.455082] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 3.455125] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 3.455280] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.455284] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.455287] usb usb5: Product: UHCI Host Controller
[ 3.455289] usb usb5: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 3.455291] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.455573] hub 5-0:1.0: USB hub found
[ 3.455587] hub 5-0:1.0: 2 ports detected
[ 3.456762] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.504073] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.528932] e100 0000:02:08.0 eth0: addr 0xfddfd000, irq 20, MAC addr 00:13:d4:b0:09:96
[ 3.530661] e100 0000:02:08.0 enp2s8: renamed from eth0
[ 3.532208] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.532210] ACPI: Thermal Zone [THRM] (40 C)
[ 3.648267] ata3.00: ATA-7: SAMSUNG SP2004C, VM100-33, max UDMA7
[ 3.648272] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.652311] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H552D, HP06, max UDMA/33
[ 3.668257] ata3.00: configured for UDMA/133
[ 3.696197] ata1.00: configured for UDMA/33
[ 3.697682] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552D HP06 PQ: 0 ANSI: 5
[ 3.708973] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2004C 0-33 PQ: 0 ANSI: 5
[ 3.742906] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 3.742992] sd 2:0:0:0: [sda] Write Protect is off
[ 3.742997] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.743033] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.761510] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.761514] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.761901] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.775089] sda: sda1 sda2 < sda5 >
[ 3.775773] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.976033] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 3.996025] tsc: Refined TSC clocksource calibration: 2800.795 MHz
[ 3.996032] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285f2ff1e47, max_idle_ns: 440795324286 ns
[ 4.028185] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800005d4b61, S400
[ 4.179044] usb 2-1: New USB device found, idVendor=046d, idProduct=08f6
[ 4.179048] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.179051] usb 2-1: Product: Camera
[ 4.664028] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 4.812502] random: fast init done
[ 4.812888] usb 1-2: New USB device found, idVendor=03f0, idProduct=c511
[ 4.812892] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.812894] usb 1-2: Product: ENVY 4500 series
[ 4.812896] usb 1-2: Manufacturer: HP
[ 4.812899] usb 1-2: SerialNumber: CN3CU2T84N05X4
[ 5.020097] clocksource: Switched to clocksource tsc
[ 5.276020] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 5.442064] usb 3-1: config 1 has an invalid interface number: 1 but max is 0
[ 5.442067] usb 3-1: config 1 has no interface number 0
[ 5.455065] usb 3-1: New USB device found, idVendor=1267, idProduct=0210
[ 5.455068] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.455070] usb 3-1: Product: PS/2+USB Mouse
[ 5.460178] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.476936] usbcore: registered new interface driver usbhid
[ 5.476938] usbhid: USB HID core driver
[ 5.478795] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:1267:0210.0001/input/input1
[ 5.478961] hid-generic 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1/input1
[ 6.080021] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 6.265060] usb 5-1: New USB device found, idVendor=058f, idProduct=9360
[ 6.265063] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.265066] usb 5-1: Product: USB Reader
[ 6.265068] usb 5-1: Manufacturer:
[ 6.265070] usb 5-1: SerialNumber: 2004888
[ 6.270588] usb-storage 5-1:1.0: USB Mass Storage device detected
[ 6.270749] scsi host4: usb-storage 5-1:1.0
[ 6.270919] usbcore: registered new interface driver usb-storage
[ 6.271572] usbcore: registered new interface driver uas
[ 6.620038] floppy0: no floppy controllers found
[ 6.620051] work still pending
[ 6.672883] PM: Starting manual resume from disk
[ 6.672889] PM: Hibernation image partition 8:5 present
[ 6.672890] PM: Looking for hibernation image.
[ 6.673154] PM: Image not found (code -22)
[ 6.673156] PM: Hibernation image not present or could not be loaded.
[ 6.920623] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.296132] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 7.299118] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 7.302113] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 7.305118] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 7.350113] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.355110] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 7.360114] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 7.365108] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 8.078985] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.218212] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 8.218452] systemd[1]: Detected architecture x86.
[ 8.218815] systemd[1]: Set hostname to <debian>.
[ 9.040927] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.041082] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.041118] systemd[1]: Reached target Remote File Systems.
[ 9.041187] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.041272] systemd[1]: Listening on Journal Socket.
[ 9.041567] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.041639] systemd[1]: Listening on udev Kernel Socket.
[ 9.558142] random: crng init done
[ 9.616270] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.789105] lp: driver loaded but no devices found
[ 10.005935] ppdev: user-space parallel port driver
[ 10.012265] parport_pc 00:02: reported by Plug and Play ACPI
[ 10.012365] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 10.090423] systemd-journald[209]: Received request to flush runtime journal from PID 1
[ 10.112180] lp0: using parport0 (interrupt-driven).
[ 11.316625] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 11.316634] ACPI: Power Button [PWRB]
[ 11.316775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.316779] ACPI: Power Button [PWRF]
[ 11.557950] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.629304] intel_rng: FWH not detected
[ 11.788742] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 11.788823] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.788900] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 11.788975] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 11.789049] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 11.789124] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 12.065591] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 12.066235] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20160831/utaddress-247)
[ 12.066246] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000428 (\PM1K) (20160831/utaddress-247)
[ 12.066252] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042A-0x000000000000042B (\GPE1) (20160831/utaddress-247)
[ 12.066259] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.066263] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20160831/utaddress-247)
[ 12.066269] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.066271] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x00000000000004AC-0x00000000000004AF (\GPIV) (20160831/utaddress-247)
[ 12.066277] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO) (20160831/utaddress-247)
[ 12.066283] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.066285] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.211459] media: Linux media interface: v0.10
[ 12.239395] Linux video capture interface: v2.00
[ 12.320104] leds_ss4200: no LED devices found
[ 12.362546] [drm] Initialized
[ 12.732837] snd_hda_codec_realtek hdaudioC0D2: ALC882: SKU not ready 0x411111f0
[ 12.733430] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC882: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.733433] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.733436] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.733438] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 12.733441] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 12.733443] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 12.733446] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 12.733449] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 12.733452] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 12.733454] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 12.733456] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
[ 12.756525] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 12.758096] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 12.758248] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 12.909444] wmi: Mapper loaded
[ 12.934328] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 12.934607] saa7134: saa7134[0]: found at 0000:02:05.0, rev: 1, irq: 17, latency: 32, mmio: 0xfddfe000
[ 12.934615] saa7134: saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM [card=100,autodetected]
[ 12.934635] saa7134: saa7134[0]: board init: gpio is 0
[ 13.096016] saa7134: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 13.096019] saa7134: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 13.096020] saa7134: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
[ 13.096022] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096023] saa7134: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
[ 13.096024] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096026] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096027] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096028] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096030] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096031] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096033] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096034] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096035] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096037] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.096038] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 13.632095] iTCO_vendor_support: vendor-support=0
[ 13.682017] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.682083] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 13.682886] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.748541] nouveau 0000:01:00.0: NVIDIA NV44 (044200a2)
[ 13.944658] nouveau 0000:01:00.0: bios: version 05.44.02.37.06
[ 13.957116] gspca_main: v2.14.0 registered
[ 13.958130] nouveau 0000:01:00.0: fb: 64 MiB DDR1
[ 13.966943] gspca_main: STV06xx-2.14.0 probing 046d:08f6
[ 13.966949] gspca_stv06xx: st6422 sensor detected
[ 13.988128] tda9887 1-0043: creating new instance
[ 13.988132] tda9887 1-0043: tda988[5/6/7] found
[ 14.000024] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
[ 14.017015] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 14.046273] [TTM] Zone kernel: Available graphics memory: 445648 kiB
[ 14.046276] [TTM] Zone highmem: Available graphics memory: 513682 kiB
[ 14.046277] [TTM] Initializing pool allocator
[ 14.046288] [TTM] Initializing DMA pool allocator
[ 14.046343] nouveau 0000:01:00.0: DRM: VRAM: 60 MiB
[ 14.046345] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[ 14.046352] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[ 14.046355] nouveau 0000:01:00.0: DRM: DCB version 3.0
[ 14.046359] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[ 14.046364] nouveau 0000:01:00.0: DRM: DCB outp 01: 020223f1 00c0c070
[ 14.046367] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[ 14.046369] nouveau 0000:01:00.0: DRM: DCB conn 01: 0210
[ 14.046372] nouveau 0000:01:00.0: DRM: DCB conn 02: 0211
[ 14.046374] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[ 14.046377] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[ 14.046733] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 14.089884] Adding 1046524k swap on /dev/sda5. Priority:-1 extents:1 across:1046524k FS
[ 14.131654] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.131657] [drm] Driver supports precise vblank timestamp query.
[ 14.138686] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 14.138701] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 1)
[ 14.188035] tuner-simple 1-0061: creating new instance
[ 14.188041] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 14.208305] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo f5b0a400
[ 14.213013] fbcon: nouveaufb (fb0) is primary device
[ 14.287503] input: STV06xx as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input8
[ 14.288977] usbcore: registered new interface driver STV06xx
[ 14.368194] saa7134: saa7134[0]: registered device video1 [v4l2]
[ 14.368569] saa7134: saa7134[0]: registered device vbi0
[ 14.368660] saa7134: saa7134[0]: registered device radio0
[ 14.382244] Console: switching to colour frame buffer device 160x64
[ 14.384307] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 14.404025] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 14.556049] floppy0: no floppy controllers found
[ 14.816862] saa7134_dvb: dvb_init() allocating 1 frontend
[ 14.996016] tuner-simple 1-0061: attaching existing instance
[ 14.996021] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 14.996024] DVB: registering new adapter (saa7134[0])
[ 14.996031] saa7134 0000:02:05.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 15.031689] usbcore: registered new interface driver snd-usb-audio
[ 15.068023] tda1004x: setting up plls for 53MHz sampling clock
[ 15.272804] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.272985] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.273160] tuner-simple 1-0061: i2c i/o error: rc == -5 (should be 4)
[ 15.273448] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.277717] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.277898] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.278073] tuner-simple 1-0061: i2c i/o error: rc == -5 (should be 4)
[ 15.278368] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.282336] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.282518] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.282695] tuner-simple 1-0061: i2c i/o error: rc == -5 (should be 4)
[ 15.282980] tda9887 1-0043: i2c i/o error: rc == -5 (should be 4)
[ 15.412023] tda1004x: found firmware revision 20 -- ok
[ 16.052189] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded
[ 16.052248] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xfddfe000 irq 17 registered as card -1
[ 23.691860] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 23.712945] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 23.716163] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[ 23.716252] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[ 25.983115] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC511
[ 25.983167] usbcore: registered new interface driver usblp
[ 37.556285] fuse init (API version 7.26)
Par contre chromium semble avoir un souci d'affichage, là je suis sur firefox, je vais voir si le reste fonctionne.
Edit 2 : bon j'ai supprimé le noyau 686 et le paquet linux-image-686 ainsi que les paquets headers associés. Pour chromium après redémarrage, tout est rentré dans l'ordre, il a fait un caca nerveux sans doute car je ne comprends pas pourquoi j'avais cette page noire, là tout semble ok
Je passe en résolu, je pense que ça va être testé cette semaine les utilisateurs du PC sont en vacances 
Merci 
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
