Victoire !!! C'est un Marnawel régénéré qui post...
Mon problème venait bien de /etc/fstab.. J'avais modifié ce dernier en rajoutant hdb1, ce nouveau petit disque histoire d'apprendre...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-25lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Sep 16 19:35:51 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfb0000 (usable)
[ 0.000000] BIOS-e820: 000000001bfb0000 - 000000001bfc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bfc0000 - 000000001bff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 114608) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114608
[ 0.000000] HighMem 114608 -> 114608
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114608
[ 0.000000] On node 0 totalpages: 114608
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 109648 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8700, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1BFB0000, 0034 (r1 A M I OEMRSDT 9000706 MSFT 97)
[ 0.000000] ACPI: FACP 1BFB0200, 0084 (r2 A M I OEMFACP 9000706 MSFT 97)
[ 0.000000] ACPI: DSDT 1BFB0450, 49F5 (r1 PV9S2 PV9S2110 110 INTL 2002026)
[ 0.000000] ACPI: FACS 1BFC0000, 0040
[ 0.000000] ACPI: APIC 1BFB0390, 0078 (r1 A M I OEMAPIC 9000706 MSFT 97)
[ 0.000000] ACPI: MCFG 1BFB0410, 003C (r1 A M I OEMMCFG 9000706 MSFT 97)
[ 0.000000] ACPI: OEMB 1BFC0040, 0054 (r1 A M I AMI_OEM 9000706 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113712
[ 0.000000] Kernel command line: root=/dev/hda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 3000.485 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 444356k/458432k available (1771k kernel code, 13476k reserved, 749k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdbfb0000 ( 447 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02baebd - 0xc0376620 ( 749 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02baebd (1771 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084116] Calibrating delay using timer specific routine.. 6006.20 BogoMIPS (lpj=12012405)
[ 0.084160] Security Framework initialized
[ 0.084166] SELinux: Disabled at boot.
[ 0.084172] Capability LSM initialized
[ 0.084191] Mount-cache hash table entries: 512
[ 0.084372] Initializing cgroup subsys ns
[ 0.084378] Initializing cgroup subsys cpuacct
[ 0.084381] Initializing cgroup subsys devices
[ 0.084411] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.084415] CPU: L2 cache: 1024K
[ 0.084419] CPU: Physical Processor ID: 0
[ 0.084425] Intel machine check architecture supported.
[ 0.084431] Intel machine check reporting enabled on CPU#0.
[ 0.084435] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.084439] CPU0: Thermal monitoring enabled
[ 0.084442] using mwait in idle threads.
[ 0.084456] Checking 'hlt' instruction... OK.
[ 0.101765] ACPI: Core revision 20080321
[ 0.115318] ENABLING IO-APIC IRQs
[ 0.115504] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.155192] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.156009] Booting processor 1/1 ip 6000
[ 0.164010] Initializing CPU#1
[ 0.164010] Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001206)
[ 0.164010] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.164010] CPU: L2 cache: 1024K
[ 0.164010] CPU: Physical Processor ID: 0
[ 0.164010] Intel machine check architecture supported.
[ 0.164010] Intel machine check reporting enabled on CPU#1.
[ 0.164010] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.164010] CPU1: Thermal monitoring enabled
[ 0.244015] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.248015] Brought up 2 CPUs
[ 0.248015] Total of 2 processors activated (12006.80 BogoMIPS).
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 0 1
[ 0.248015] domain 1: span 0-1
[ 0.248015] groups: 0-1
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 1 0
[ 0.248015] domain 1: span 0-1
[ 0.248015] groups: 0-1
[ 0.248015] net_namespace: 660 bytes
[ 0.248015] Booting paravirtualized kernel on bare hardware
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.248015] PCI: Not using MMCONFIG.
[ 0.248015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
[ 0.248015] PCI: Using configuration type 1 for base access
[ 0.248015] Setting up standard PCI resources
[ 0.256016] ACPI: EC: Look up EC in DSDT
[ 0.267330] ACPI: Interpreter enabled
[ 0.267335] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.267359] ACPI: Using IOAPIC for interrupt routing
[ 0.267434] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.275322] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.275325] PCI: Using MMCONFIG for extended config space
[ 0.290226] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.290226] PCI: Transparent bridge - 0000:00:13.1
[ 0.290226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.290226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.290226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.290226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.290226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.310950] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.310950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.310950] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.310950] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.310950] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.310950] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.310950] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.311137] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.311316] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.315507] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.316731] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - FB, should be EE [20080321]
[ 0.316745] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.317266] pnp: PnP ACPI init
[ 0.317278] ACPI: bus type pnp registered
[ 0.323093] pnp: PnP ACPI: found 14 devices
[ 0.323097] ACPI: ACPI bus type pnp unregistered
[ 0.323102] PnPBIOS: Disabled by ACPI PNP
[ 0.326960] PCI: Using ACPI for IRQ routing
[ 0.326960] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 0.334167] ACPI: RTC can wake from S4
[ 0.338118] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.338122] system 00:06: ioport range 0x3e0-0x3e7 has been reserved
[ 0.338125] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.338128] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.338131] system 00:06: ioport range 0x400-0x41f has been reserved
[ 0.338135] system 00:06: iomem range 0xfecc0000-0xfecc0fff could not be reserved
[ 0.338139] system 00:06: iomem range 0xf0012000-0xf0012fff has been reserved
[ 0.338149] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.338154] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.338164] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.338172] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.338176] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.338179] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.338182] system 00:0c: iomem range 0x100000-0x1bffffff could not be reserved
[ 0.338186] system 00:0c: iomem range 0xfeb00000-0xffffffff could not be reserved
[ 0.370232] PCI: Bridge: 0000:00:01.0
[ 0.370232] IO window: disabled.
[ 0.370232] MEM window: 0xfd000000-0xfeafffff
[ 0.370232] PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
[ 0.370232] PCI: Bridge: 0000:00:02.0
[ 0.370232] IO window: disabled.
[ 0.370232] MEM window: disabled.
[ 0.370232] PREFETCH window: 0x00000000fbf00000-0x00000000fbffffff
[ 0.370232] PCI: Bridge: 0000:00:13.1
[ 0.370232] IO window: disabled.
[ 0.370232] MEM window: disabled.
[ 0.370232] PREFETCH window: disabled.
[ 0.370232] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.370232] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
[ 0.370232] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.370232] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 0.370232] NET: Registered protocol family 2
[ 0.383291] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.383570] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.383660] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.386215] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.386218] TCP reno registered
[ 0.393767] NET: Registered protocol family 1
[ 0.393914] checking if image is initramfs... it is
[ 0.869268] Switched to high resolution mode on CPU 1
[ 0.873166] Switched to high resolution mode on CPU 0
[ 0.900687] Freeing initrd memory: 6068k freed
[ 0.904656] audit: initializing netlink socket (disabled)
[ 0.904656] type=2000 audit(1288433376.888:1): initialized
[ 0.904656] Total HugeTLB memory allocated, 0
[ 0.904656] VFS: Disk quotas dquot_6.5.1
[ 0.904656] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.904656] msgmni has been set to 880
[ 0.904656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.904656] io scheduler noop registered
[ 0.904656] io scheduler anticipatory registered
[ 0.904656] io scheduler deadline registered
[ 0.904656] io scheduler cfq registered (default)
[ 0.904656] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.904656] pci 0000:01:00.0: Boot video device
[ 0.904656] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.904656] assign_interrupt_mode Found MSI capability
[ 0.904656] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.904656] Allocate Port Service[0000:00:02.0:pcie01]
[ 0.904656] Allocate Port Service[0000:00:02.0:pcie02]
[ 0.904656] Allocate Port Service[0000:00:02.0:pcie03]
[ 0.907781] Load service driver aer on pcie device 0000:00:02.0:pcie01
[ 0.908656] isapnp: Scanning for PnP cards...
[ 1.259971] isapnp: No Plug & Play device found
[ 1.264682] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.264682] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.264682] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.268690] brd: module loaded
[ 1.268690] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 1.268690] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 1.268690] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.268690] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.268690] mice: PS/2 mouse device common for all mice
[ 1.268690] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.268690] rtc0: alarms up to one year, y3k
[ 1.268690] cpuidle: using governor ladder
[ 1.268690] cpuidle: using governor menu
[ 1.268690] No iBFT detected.
[ 1.268690] TCP cubic registered
[ 1.268690] NET: Registered protocol family 17
[ 1.268690] Using IPI No-Shortcut mode
[ 1.268690] registered taskstats version 1
[ 1.268690] rtc_cmos 00:07: setting system clock to 2010-10-30 10:09:38 UTC (1288433378)
[ 1.268918] Freeing unused kernel memory: 244k freed
[ 1.372683] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.372683] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 1.372683] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.985665] Uniform Multi-Platform E-IDE driver
[ 1.985678] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.000263] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot 0000:00:0f.1
[ 2.000263] VP_IDE: not 100% native mode: will probe irqs later
[ 2.000263] VP_IDE: VIA vt8237s (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 2.000263] ide0: BM-DMA at 0xfc00-0xfc07
[ 2.000263] ide1: BM-DMA at 0xfc08-0xfc0f
[ 2.000263] Probing IDE interface ide0...
[ 2.008752] No dock devices found.
[ 2.076600] SCSI subsystem initialized
[ 2.120465] usbcore: registered new interface driver usbfs
[ 2.120522] usbcore: registered new interface driver hub
[ 2.140470] usbcore: registered new device driver usb
[ 2.184472] libata version 3.00 loaded.
[ 2.199440] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.223702] USB Universal Host Controller Interface driver v3.0
[ 2.264478] Floppy drive(s): fd0 is 1.44M
[ 2.284483] FDC 0 is a post-1991 82077
[ 2.412530] hda: WDC WD2500AAJB-00J3A0, ATA DISK drive
[ 2.664501] hdb: FUJITSU MPD3064AT, ATA DISK drive
[ 2.748547] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.748861] hda: UDMA/133 mode selected
[ 2.749163] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.749381] hdb: drive side 80-wire cable detection failed, limiting max speed to UDMA33
[ 2.749384] hdb: UDMA/33 mode selected
[ 2.749603] Probing IDE interface ide1...
[ 3.612598] hdc: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive
[ 4.692029] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.692383] hdc: UDMA/33 mode selected
[ 4.696480] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.704292] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.704484] sata_via 0000:00:0f.0: version 2.3
[ 4.704484] ACPI: PCI Interrupt 0000:00:0f.0[b] -> GSI 21 (level, low) -> IRQ 21
[ 4.704484] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 4.704484] scsi0 : sata_via
[ 4.704484] scsi1 : sata_via
[ 4.708240] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 21
[ 4.708246] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 21
[ 4.913736] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 5.125732] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 5.135873] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 5.135873] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 5.135873] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 5.135873] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d480
[ 5.135873] usb usb1: configuration #1 chosen from 1 choice
[ 5.135873] hub 1-0:1.0: USB hub found
[ 5.135873] hub 1-0:1.0: 2 ports detected
[ 5.241881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.241881] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.241881] usb usb1: Product: UHCI Host Controller
[ 5.241881] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 5.241881] usb usb1: SerialNumber: 0000:00:10.0
[ 5.241881] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 22 (level, low) -> IRQ 22
[ 5.241881] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 5.241881] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 5.241881] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800
[ 5.241881] usb usb2: configuration #1 chosen from 1 choice
[ 5.241881] hub 2-0:1.0: USB hub found
[ 5.241881] hub 2-0:1.0: 2 ports detected
[ 5.394203] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.394208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.394212] usb usb2: Product: UHCI Host Controller
[ 5.394214] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 5.394217] usb usb2: SerialNumber: 0000:00:10.1
[ 5.398052] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 5.398052] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 5.398052] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 5.398052] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d880
[ 5.398052] usb usb3: configuration #1 chosen from 1 choice
[ 5.398052] hub 3-0:1.0: USB hub found
[ 5.398052] hub 3-0:1.0: 2 ports detected
[ 5.518087] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.518092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.518095] usb usb3: Product: UHCI Host Controller
[ 5.518097] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 5.518099] usb usb3: SerialNumber: 0000:00:10.2
[ 5.519393] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 5.519393] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 5.519393] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 5.519393] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00
[ 5.519393] usb usb4: configuration #1 chosen from 1 choice
[ 5.519393] hub 4-0:1.0: USB hub found
[ 5.519393] hub 4-0:1.0: 2 ports detected
[ 5.660809] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.660813] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.660816] usb usb4: Product: UHCI Host Controller
[ 5.660819] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 5.660821] usb usb4: SerialNumber: 0000:00:10.3
[ 5.664702] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 5.664702] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 5.664702] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 5.664702] ehci_hcd 0000:00:10.4: debug port 1
[ 5.664702] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfcfffc00
[ 5.735991] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.736078] usb usb5: configuration #1 chosen from 1 choice
[ 5.736116] hub 5-0:1.0: USB hub found
[ 5.736127] hub 5-0:1.0: 8 ports detected
[ 5.837123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.837127] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.837130] usb usb5: Product: EHCI Host Controller
[ 5.837133] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 5.837135] usb usb5: SerialNumber: 0000:00:10.4
[ 5.837123] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 5.881353] eth0: VIA Rhine II at 0x1d000, 00:19:66:4b:7d:9b, IRQ 23.
[ 5.882072] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link c5e1.
[ 6.005956] hda: max request size: 512KiB
[ 6.009746] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.009751] Uniform CD-ROM driver Revision: 3.20
[ 6.017751] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
[ 6.017751] hda: cache flushes supported
[ 6.017751] hda: hda1 hda2 < hda5 hda6 >
[ 6.053750] hdb: max request size: 128KiB
[ 6.053760] hdb: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=13410/15/63
[ 6.053768] hdb: cache flushes not supported
[ 6.053830] hdb: hdb1
[ 6.939335] PM: Starting manual resume from disk
[ 6.992004] kjournald starting. Commit interval 5 seconds
[ 6.992004] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.243366] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 7.445964] usb 3-2: configuration #1 chosen from 1 choice
[ 7.465005] usb 3-2: New USB device found, idVendor=046d, idProduct=c312
[ 7.465005] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.465005] usb 3-2: Product: USB Multimedia Keyboard
[ 7.465005] usb 3-2: Manufacturer: LITEON Technology
[ 8.419477] udevd version 125 started
[ 9.831374] Linux agpgart interface v0.103
[ 9.848379] agpgart: Detected VIA P4M900 chipset
[ 9.853411] agpgart: AGP aperture is 64M @ 0xf8000000
[ 9.878691] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.889398] input: Power Button (FF) as /class/input/input0
[ 9.907339] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.915330] ACPI: Power Button (FF) [PWRF]
[ 9.915330] input: Sleep Button (CM) as /class/input/input1
[ 9.927339] ACPI: Sleep Button (CM) [SLPB]
[ 9.927339] input: Power Button (CM) as /class/input/input2
[ 9.953728] ACPI: Power Button (CM) [PWRB]
[ 10.825656] usbcore: registered new interface driver hiddev
[ 10.845655] input: LITEON Technology USB Multimedia Keyboard as /class/input/input3
[ 10.869114] input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:10.2-2
[ 10.869153] usbcore: registered new interface driver usbhid
[ 10.869160] usbhid: v2.6:USB HID core driver
[ 10.904706] input: PC Speaker as /class/input/input4
[ 11.941823] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 11.941823] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 11.941823] PCI: Disallowing DAC for device 0000:80:01.0
[ 11.960159] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[ 11.965822] parport_pc 00:05: reported by Plug and Play ACPI
[ 11.965822] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 11.973829] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
[ 12.725444] Adding 1317288k swap on /dev/hda5. Priority:-1 extents:1 across:1317288k
[ 12.946138] EXT3-fs: Unrecognized mount option "d" or missing value
[ 12.986511] EXT3-fs: Unrecognized mount option "d" or missing value
[ 13.200769] loop: module loaded
[ 13.953163] kjournald starting. Commit interval 5 seconds
[ 13.953163] EXT3 FS on hda6, internal journal
[ 13.953163] EXT3-fs: mounted filesystem with ordered data mode.
[ 358.298779] lp0: using parport0 (interrupt-driven).
[ 358.324179] ppdev: user-space parallel port driver
[ 358.950099] NET: Registered protocol family 10
[ 358.950099] lo: Disabled Privacy Extensions
[ 359.973532] Bluetooth: Core ver 2.11
[ 359.973532] NET: Registered protocol family 31
[ 359.973532] Bluetooth: HCI device and connection manager initialized
[ 359.973532] Bluetooth: HCI socket layer initialized
[ 360.174426] Bluetooth: L2CAP ver 2.9
[ 360.174426] Bluetooth: L2CAP socket layer initialized
[ 360.190427] Bluetooth: RFCOMM socket layer initialized
[ 360.190427] Bluetooth: RFCOMM TTY layer initialized
[ 360.190427] Bluetooth: RFCOMM ver 1.8
[ 446.905969] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 447.048067] usb 5-8: configuration #1 chosen from 1 choice
[ 447.048703] usb 5-8: New USB device found, idVendor=13fe, idProduct=1f00
[ 447.048709] usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 447.048714] usb 5-8: Product: DataTraveler 2.0
[ 447.048718] usb 5-8: Manufacturer: Kingston
[ 447.048722] usb 5-8: SerialNumber: 5B8408000275
[ 447.191143] Initializing USB Mass Storage driver...
[ 447.199912] scsi2 : SCSI emulation for USB Mass Storage devices
[ 447.200214] usbcore: registered new interface driver usb-storage
[ 447.200221] USB Mass Storage support registered.
[ 447.203913] usb-storage: device found at 3
[ 447.203913] usb-storage: waiting for device to settle before scanning
[ 452.208411] usb-storage: device scan complete
[ 452.208411] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 452.331053] Driver 'sd' needs updating - please use bus_type methods
[ 452.557220] sd 2:0:0:0: [sda] 1953792 512-byte hardware sectors (1000 MB)
[ 452.557220] sd 2:0:0:0: [sda] Write Protect is off
[ 452.557220] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 452.557220] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 452.561221] sd 2:0:0:0: [sda] 1953792 512-byte hardware sectors (1000 MB)
[ 452.561221] sd 2:0:0:0: [sda] Write Protect is off
[ 452.561221] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 452.561221] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 452.561221] sda: sda1
[ 452.561221] sd 2:0:0:0: [sda] Attached SCSI removable disk