[Résolu] Problème affichage écran (GNOME) écran inconnu

hezfry · 25-01-2018 23:07:59

Salut, je poste un message ici pour demander de l'aide comme dis dans le titre, l'os ne reconnais pas mon écran et me met une resolution du 800*600 maximum sans pouvoir la changer, j'ai déjà essayer plein de solution, je ne sais plus quoi faire, sur windows mon ordinateur a une resolution de 1920*1080.
C'est un ordi portable avec 2 processeur graphique, un intel et un nvidia (Geforce 920M)
Merci de votre aide d'avance !

Dernière modification par hezfry (27-01-2018 17:52:33)

èfpé · 26-01-2018 00:06:42

Bonsoir et bienvenue,

Euh... c'est quoi « plein de solutions » ? l'installation du paquet firmware-misc-nonfree faisait-elle partie du pack ?

apt install firmware-misc-nonfree

Cette commande est à exécuter après avoir ajouté la section non-free au fichier sources.list (cf. wiki).

Si le problème persiste, donne les références exactes et précises du portable, ainsi que le retour de :

lspci -nn

Le principe de la manip est d'installer les firmwares nécessaires au bon fonctionnement du GPU Intel.

hezfry · 26-01-2018 00:24:51

 lspci -nn 

00.0 Host bridge [0600]: Intel Corporation Device [8086:5904] (rev 02)

02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:5916] (rev 02)

04.0 Signal processing controller [1180]: Intel Corporation Device [8086:1903] (rev 02)

14.0 USB controller [0c03]: Intel Corporation Device [8086:9d2f] (rev 21)

14.2 Signal processing controller [1180]: Intel Corporation Device [8086:9d31] (rev 21)

15.0 Signal processing controller [1180]: Intel Corporation Device [8086:9d60] (rev 21)

15.1 Signal processing controller [1180]: Intel Corporation Device [8086:9d61] (rev 21)

16.0 Communication controller [0780]: Intel Corporation Device [8086:9d3a] (rev 21)

17.0 SATA controller [0106]: Intel Corporation Device [8086:9d03] (rev 21)

1c.0 PCI bridge [0604]: Intel Corporation Device [8086:9d10] (rev f1)

1c.4 PCI bridge [0604]: Intel Corporation Device [8086:9d14] (rev f1)

1c.5 PCI bridge [0604]: Intel Corporation Device [8086:9d15] (rev f1)

1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d58] (rev 21)

1f.2 Memory controller [0580]: Intel Corporation Device [8086:9d21] (rev 21)

1f.3 Audio device [0403]: Intel Corporation Device [8086:9d71] (rev 21)

1f.4 SMBus [0c05]: Intel Corporation Device [8086:9d23] (rev 21)

00.0 3D controller [0302]: NVIDIA Corporation Device [10de:1299] (rev a1)

00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5286] (rev 01)

00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 06)

00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]

voilà ce que la commande m'affiche, bien evidement j'ai tester l'astuce proposer et ça ne marche pas, je ne comprend vraiment pas..
la référence exacte de l'ordinateur est : ASUS R541U-DM306T

èfpé · 26-01-2018 00:56:42

Re-,

Pas trouvé les spécifications de ce modèle en particulier, mais a priori, le CPU est bien un Skylake/Kaby Lake.
Et le GPU Intel HD Graphics 620, est pris en charge par le module i915 depuis la version 4.5 du noyau Linux.

cat /var/log/Xorg.0.log

dmesg | egrep 'drm|i915|firmware'

J'imagine que tu as redémarré, ces commandes devraient apporter un complément d'informations.

Dernière modification par èfpé (26-01-2018 01:26:42)

hezfry · 26-01-2018 08:35:35

cat /var/log/Xorg.0.log

 

[     9.272] 

X.Org X Server 1.16.4

Release Date: 2014-12-20

[     9.272] X Protocol Version 11, Revision 0

[     9.272] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[     9.272] Current Operating System: Linux debian 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64

[     9.272] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=596c8109-65e9-4d61-8f55-783b0d4064b5 ro quiet

[     9.272] Build Date: 14 October 2017  10:41:31AM

[     9.272] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support) 

[     9.272] Current version of pixman: 0.32.6

[     9.272]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[     9.272] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[     9.272] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 26 08:30:37 2018

[     9.274] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[     9.277] (==) No Layout section.  Using the first Screen section.

[     9.277] (==) No screen section available. Using defaults.

[     9.277] (**) |-->Screen "Default Screen Section" (0)

[     9.278] (**) |   |-->Monitor "<default monitor>"

[     9.279] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[     9.279] (==) Automatically adding devices

[     9.279] (==) Automatically enabling devices

[     9.279] (==) Automatically adding GPU devices

[     9.287] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[     9.287]  Entry deleted from font path.

[     9.296] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[     9.296] (==) ModulePath set to "/usr/lib/xorg/modules"

[     9.296] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[     9.297] (II) Loader magic: 0x557bfb309d80

[     9.297] (II) Module ABI versions:

[     9.297]  X.Org ANSI C Emulation: 0.4

[     9.297]  X.Org Video Driver: 18.0

[     9.297]  X.Org XInput driver : 21.0

[     9.297]  X.Org Server Extension : 8.0

[     9.299] (--) PCI:*(0:0:2:0) 8086:5916:1043:18d0 rev 2, Mem @ 0xed000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64

[     9.299] (--) PCI: (0:1:0:0) 10de:1299:1043:18d0 rev 161, Mem @ 0xee000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288

[     9.299] (II) LoadModule: "glx"

[     9.301] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[     9.322] (II) Module glx: vendor="X.Org Foundation"

[     9.322]  compiled for 1.16.4, module version = 1.0.0

[     9.322]  ABI class: X.Org Server Extension, version 8.0

[     9.322] (==) AIGLX enabled

[     9.322] (==) Matched intel as autoconfigured driver 0

[     9.322] (==) Matched modesetting as autoconfigured driver 1

[     9.322] (==) Matched fbdev as autoconfigured driver 2

[     9.322] (==) Matched vesa as autoconfigured driver 3

[     9.322] (==) Assigned the driver to the xf86ConfigLayout

[     9.322] (II) LoadModule: "intel"

[     9.323] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

[     9.332] (II) Module intel: vendor="X.Org Foundation"

[     9.332]  compiled for 1.15.99.904, module version = 2.21.15

[     9.332]  Module class: X.Org Video Driver

[     9.332]  ABI class: X.Org Video Driver, version 18.0

[     9.332] (II) LoadModule: "modesetting"

[     9.332] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[     9.334] (II) Module modesetting: vendor="X.Org Foundation"

[     9.334]  compiled for 1.16.4, module version = 0.9.0

[     9.334]  Module class: X.Org Video Driver

[     9.334]  ABI class: X.Org Video Driver, version 18.0

[     9.334] (II) LoadModule: "fbdev"

[     9.334] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[     9.336] (II) Module fbdev: vendor="X.Org Foundation"

[     9.336]  compiled for 1.15.99.904, module version = 0.4.4

[     9.336]  Module class: X.Org Video Driver

[     9.336]  ABI class: X.Org Video Driver, version 18.0

[     9.336] (II) LoadModule: "vesa"

[     9.336] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[     9.337] (II) Module vesa: vendor="X.Org Foundation"

[     9.337]  compiled for 1.15.99.904, module version = 2.3.3

[     9.337]  Module class: X.Org Video Driver

[     9.337]  ABI class: X.Org Video Driver, version 18.0

[     9.337] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:

  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,

  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,

  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,

  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,

  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,

  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,

  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,

  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200

[     9.338] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[     9.338] (II) FBDEV: driver for framebuffer: fbdev

[     9.338] (II) VESA: driver for VESA chipsets: vesa

[     9.338] (++) using VT number 7

[     9.358] (EE) open /dev/dri/card0: No such file or directory

[     9.358] (WW) Falling back to old probe method for modesetting

[     9.358] (EE) open /dev/dri/card0: No such file or directory

[     9.358] (II) Loading sub module "fbdevhw"

[     9.358] (II) LoadModule: "fbdevhw"

[     9.358] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[     9.365] (II) Module fbdevhw: vendor="X.Org Foundation"

[     9.365]  compiled for 1.16.4, module version = 0.0.2

[     9.365]  ABI class: X.Org Video Driver, version 18.0

[     9.365] (**) FBDEV(1): claimed PCI slot 0@0:2:0

[     9.365] (II) FBDEV(1): using default device

[     9.365] (WW) Falling back to old probe method for vesa

[     9.365] (EE) Screen 0 deleted because of no matching config section.

[     9.365] (II) UnloadModule: "modesetting"

[     9.365] (II) FBDEV(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[     9.365] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32

[     9.365] (==) FBDEV(0): RGB weight 888

[     9.365] (==) FBDEV(0): Default visual is TrueColor

[     9.365] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)

[     9.365] (II) FBDEV(0): hardware: EFI VGA (video memory: 1920kB)

[     9.365] (II) FBDEV(0): checking modes against framebuffer device...

[     9.365] (II) FBDEV(0): checking modes against monitor...

[     9.365] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)

[     9.365] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz

[     9.365] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024  600 604 608 624 -hsync -vsync -csync (46.9 kHz b)

[     9.365] (==) FBDEV(0): DPI set to (96, 96)

[     9.365] (II) Loading sub module "fb"

[     9.365] (II) LoadModule: "fb"

[     9.365] (II) Loading /usr/lib/xorg/modules/libfb.so

[     9.368] (II) Module fb: vendor="X.Org Foundation"

[     9.368]  compiled for 1.16.4, module version = 1.0.0

[     9.368]  ABI class: X.Org ANSI C Emulation, version 0.4

[     9.368] (**) FBDEV(0): using shadow framebuffer

[     9.368] (II) Loading sub module "shadow"

[     9.368] (II) LoadModule: "shadow"

[     9.368] (II) Loading /usr/lib/xorg/modules/libshadow.so

[     9.369] (II) Module shadow: vendor="X.Org Foundation"

[     9.369]  compiled for 1.16.4, module version = 1.1.0

[     9.369]  ABI class: X.Org ANSI C Emulation, version 0.4

[     9.369] (II) UnloadModule: "vesa"

[     9.369] (II) Unloading vesa

[     9.369] (==) Depth 24 pixmap format is 32 bpp

[     9.369] (EE) FBDEV(0): FBIOBLANK: Invalid argument

[     9.376] (==) FBDEV(0): Backing store enabled

[     9.377] (==) FBDEV(0): DPMS enabled

[     9.378] (==) RandR enabled

[     9.382] (II) SELinux: Disabled on system

[     9.383] (II) AIGLX: Screen 0 is not DRI2 capable

[     9.383] (EE) AIGLX: reverting to software rendering

[     9.641] (II) AIGLX: Loaded and initialized swrast

[     9.641] (II) GLX: Initialized DRISWRAST GL provider for screen 0

[     9.723] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[     9.723] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[     9.723] (II) LoadModule: "evdev"

[     9.724] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[     9.730] (II) Module evdev: vendor="X.Org Foundation"

[     9.730]  compiled for 1.16.0, module version = 2.9.0

[     9.730]  Module class: X.Org XInput Driver

[     9.730]  ABI class: X.Org XInput driver, version 21.0

[     9.730] (II) Using input driver 'evdev' for 'Power Button'

[     9.730] (**) Power Button: always reports core events

[     9.730] (**) evdev: Power Button: Device: "/dev/input/event5"

[     9.730] (--) evdev: Power Button: Vendor 0 Product 0x1

[     9.730] (--) evdev: Power Button: Found keys

[     9.730] (II) evdev: Power Button: Configuring as keyboard

[     9.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"

[     9.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[     9.730] (**) Option "xkb_rules" "evdev"

[     9.730] (**) Option "xkb_model" "pc105"

[     9.730] (**) Option "xkb_layout" "fr"

[     9.730] (**) Option "xkb_variant" "latin9"

[     9.756] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)

[     9.756] (II) No input driver specified, ignoring this device.

[     9.756] (II) This device may have been added with another device file.

[     9.756] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[     9.756] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[     9.756] (II) Using input driver 'evdev' for 'Power Button'

[     9.756] (**) Power Button: always reports core events

[     9.756] (**) evdev: Power Button: Device: "/dev/input/event4"

[     9.756] (--) evdev: Power Button: Vendor 0 Product 0x1

[     9.756] (--) evdev: Power Button: Found keys

[     9.756] (II) evdev: Power Button: Configuring as keyboard

[     9.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"

[     9.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[     9.756] (**) Option "xkb_rules" "evdev"

[     9.756] (**) Option "xkb_model" "pc105"

[     9.756] (**) Option "xkb_layout" "fr"

[     9.756] (**) Option "xkb_variant" "latin9"

[     9.757] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)

[     9.757] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"

[     9.757] (II) Using input driver 'evdev' for 'Sleep Button'

[     9.757] (**) Sleep Button: always reports core events

[     9.757] (**) evdev: Sleep Button: Device: "/dev/input/event3"

[     9.757] (--) evdev: Sleep Button: Vendor 0 Product 0x3

[     9.757] (--) evdev: Sleep Button: Found keys

[     9.757] (II) evdev: Sleep Button: Configuring as keyboard

[     9.757] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"

[     9.757] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)

[     9.757] (**) Option "xkb_rules" "evdev"

[     9.757] (**) Option "xkb_model" "pc105"

[     9.757] (**) Option "xkb_layout" "fr"

[     9.757] (**) Option "xkb_variant" "latin9"

[     9.757] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4072 (/dev/input/event1)

[     9.757] (**) Logitech Unifying Device. Wireless PID:4072: Applying InputClass "evdev pointer catchall"

[     9.757] (**) Logitech Unifying Device. Wireless PID:4072: Applying InputClass "evdev keyboard catchall"

[     9.757] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4072'

[     9.757] (**) Logitech Unifying Device. Wireless PID:4072: always reports core events

[     9.757] (**) evdev: Logitech Unifying Device. Wireless PID:4072: Device: "/dev/input/event1"

[     9.757] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Vendor 0x46d Product 0xc52b

[     9.757] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found 20 mouse buttons

[     9.757] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found scroll wheel(s)

[     9.757] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found relative axes

[     9.757] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found x and y relative axes

[     9.757] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found absolute axes

[     9.757] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Forcing absolute x/y axes to exist.

[     9.757] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found keys

[     9.757] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Configuring as mouse

[     9.757] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Configuring as keyboard

[     9.757] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Adding scrollwheel support

[     9.757] (**) evdev: Logitech Unifying Device. Wireless PID:4072: YAxisMapping: buttons 4 and 5

[     9.757] (**) evdev: Logitech Unifying Device. Wireless PID:4072: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[     9.757] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input1/event1"

[     9.757] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4072" (type: KEYBOARD, id 9)

[     9.757] (**) Option "xkb_rules" "evdev"

[     9.757] (**) Option "xkb_model" "pc105"

[     9.757] (**) Option "xkb_layout" "fr"

[     9.757] (**) Option "xkb_variant" "latin9"

[     9.758] (II) evdev: Logitech Unifying Device. Wireless PID:4072: initialized for relative axes.

[     9.758] (WW) evdev: Logitech Unifying Device. Wireless PID:4072: ignoring absolute axes.

[     9.758] (**) Logitech Unifying Device. Wireless PID:4072: (accel) keeping acceleration scheme 1

[     9.758] (**) Logitech Unifying Device. Wireless PID:4072: (accel) acceleration profile 0

[     9.758] (**) Logitech Unifying Device. Wireless PID:4072: (accel) acceleration factor: 2.000

[     9.758] (**) Logitech Unifying Device. Wireless PID:4072: (accel) acceleration threshold: 4

[     9.758] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4072 (/dev/input/mouse0)

[     9.758] (II) No input driver specified, ignoring this device.

[     9.758] (II) This device may have been added with another device file.

[     9.758] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)

[     9.758] (II) No input driver specified, ignoring this device.

[     9.758] (II) This device may have been added with another device file.

[     9.758] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event8)

[     9.758] (II) No input driver specified, ignoring this device.

[     9.758] (II) This device may have been added with another device file.

[     9.758] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)

[     9.758] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"

[     9.758] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'

[     9.758] (**) Asus WMI hotkeys: always reports core events

[     9.758] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"

[     9.759] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0

[     9.759] (--) evdev: Asus WMI hotkeys: Found keys

[     9.759] (II) evdev: Asus WMI hotkeys: Configuring as keyboard

[     9.759] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event9"

[     9.759] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 10)

[     9.759] (**) Option "xkb_rules" "evdev"

[     9.759] (**) Option "xkb_model" "pc105"

[     9.759] (**) Option "xkb_layout" "fr"

[     9.759] (**) Option "xkb_variant" "latin9"

[     9.759] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[     9.759] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"

[     9.759] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'

[     9.759] (**) AT Translated Set 2 keyboard: always reports core events

[     9.759] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"

[     9.759] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1

[     9.759] (--) evdev: AT Translated Set 2 keyboard: Found keys

[     9.759] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard

[     9.759] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[     9.759] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)

[     9.759] (**) Option "xkb_rules" "evdev"

[     9.759] (**) Option "xkb_model" "pc105"

[     9.759] (**) Option "xkb_layout" "fr"

[     9.759] (**) Option "xkb_variant" "latin9"

[     9.759] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)

[     9.759] (II) No input driver specified, ignoring this device.

[     9.759] (II) This device may have been added with another device file.

[     9.761] (EE) FBDEV(0): FBIOBLANK: Invalid argument

Voilà ce que la commande ma renvoyer et pour la deuxième.

dmesg | egrep 'drm|i915|firmware'

[    6.985847] [drm] Initialized drm 1.1.0 20060810

[    7.476682] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin

[    7.479620] rtl8723be 0000:03:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin

[    9.168700] r8169 0000:02:00.2: firmware: direct-loading firmware rtl_nic/rtl8402-1.fw

bon j'ai pas trop compris ce qu'elle ma renvoyer ^^

èfpé · 26-01-2018 14:40:42

Re-,

OK ; ma faute... j'ai supposé que tu avais installé la version stable (Debian 9 Stretch), mais non apparemment :

uname -snrvm

Linux debian 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64

lsb_release -d

Ton système est à jour, mais cela ne suffit pas, ton portable est trop récent pour Debian 8 Jessie !
Je doute que tu aies pu installer le paquet firmware-misc-nonfree... firmware-linux-nonfree plutôt ?

hezfry · 26-01-2018 16:11:51

euh, et si mon portable est trop récent pour ce debian je fais comment ?
et du coup je viens d'installer le " firmware-linux-nonfree" mais psa de changement..
je ne sais vraiment pas quoi faire HELP ^^.

hezfry · 26-01-2018 16:38:35

je viens de me rendre compte que je n'avais pas de fichier xorg.conf est-ce normal ?

èfpé · 26-01-2018 16:50:42

Re-,

Alors comme indiqué en #4 il te faut un noyau 4.5+, le 4.9 de Debian 9 Stretch semble tout indiqué :

soit réinstaller tout le système (image stretch native) ;
soit upgrader tout le système (jessie vers stretch) ;
soit installer le noyau stretch rétroporté (jessie-backports).

Tu le sens comment ? Comment avais-tu procédé initialement ? En clair avec quelle ISO ?

Dernière modification par èfpé (26-01-2018 16:54:42)

hezfry · 26-01-2018 17:05:08

Bah écoute l'installer en Iso ça serais cool mais je sais pas le quel prendre, et j'ai procédé avec l'iso que mon iut utilise en fait ^^

èfpé · 26-01-2018 17:14:42

Re-,

OK ; l'idéal serait que tu puisses vérifier la compatibilité matérielle avant d'installer en dur... du coup, une image Live incluant les firmwares non libres peut-être ? C'était une image Live celle de l'IUT ?

hezfry · 26-01-2018 17:30:49

J'ai pris un tuto pour passe de Debian 8 a Debian 9, normalement je suis bien a jour et j'ai retaper la commande

cat /var/log/Xorg.0.log

[    10.407] 

X.Org X Server 1.16.4

Release Date: 2014-12-20

[    10.407] X Protocol Version 11, Revision 0

[    10.407] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[    10.407] Current Operating System: Linux debian 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64

[    10.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=1b8330be-3221-4a7b-898f-f25d022ccbaa ro quiet

[    10.407] Build Date: 14 October 2017  10:41:31AM

[    10.407] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support) 

[    10.407] Current version of pixman: 0.34.0

[    10.407]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    10.407] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    10.407] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 26 17:25:44 2018

[    10.409] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    10.412] (==) No Layout section.  Using the first Screen section.

[    10.412] (==) No screen section available. Using defaults.

[    10.412] (**) |-->Screen "Default Screen Section" (0)

[    10.412] (**) |   |-->Monitor "<default monitor>"

[    10.414] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    10.414] (==) Automatically adding devices

[    10.414] (==) Automatically enabling devices

[    10.414] (==) Automatically adding GPU devices

[    10.417] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    10.418]  Entry deleted from font path.

[    10.428] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    10.428] (==) ModulePath set to "/usr/lib/xorg/modules"

[    10.428] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    10.430] (II) Loader magic: 0x55742a451d80

[    10.430] (II) Module ABI versions:

[    10.430]  X.Org ANSI C Emulation: 0.4

[    10.430]  X.Org Video Driver: 18.0

[    10.430]  X.Org XInput driver : 21.0

[    10.430]  X.Org Server Extension : 8.0

[    10.432] (--) PCI:*(0:0:2:0) 8086:5916:1043:18d0 rev 2, Mem @ 0xed000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64

[    10.432] (--) PCI: (0:1:0:0) 10de:1299:1043:18d0 rev 161, Mem @ 0xee000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288

[    10.432] (II) LoadModule: "glx"

[    10.434] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    10.455] (II) Module glx: vendor="X.Org Foundation"

[    10.455]  compiled for 1.16.4, module version = 1.0.0

[    10.455]  ABI class: X.Org Server Extension, version 8.0

[    10.455] (==) AIGLX enabled

[    10.455] (==) Matched intel as autoconfigured driver 0

[    10.455] (==) Matched modesetting as autoconfigured driver 1

[    10.455] (==) Matched fbdev as autoconfigured driver 2

[    10.455] (==) Matched vesa as autoconfigured driver 3

[    10.455] (==) Assigned the driver to the xf86ConfigLayout

[    10.455] (II) LoadModule: "intel"

[    10.456] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

[    10.476] (II) Module intel: vendor="X.Org Foundation"

[    10.476]  compiled for 1.15.99.904, module version = 2.21.15

[    10.476]  Module class: X.Org Video Driver

[    10.476]  ABI class: X.Org Video Driver, version 18.0

[    10.476] (II) LoadModule: "modesetting"

[    10.476] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    10.478] (II) Module modesetting: vendor="X.Org Foundation"

[    10.478]  compiled for 1.16.4, module version = 0.9.0

[    10.478]  Module class: X.Org Video Driver

[    10.478]  ABI class: X.Org Video Driver, version 18.0

[    10.478] (II) LoadModule: "fbdev"

[    10.479] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    10.480] (II) Module fbdev: vendor="X.Org Foundation"

[    10.480]  compiled for 1.15.99.904, module version = 0.4.4

[    10.480]  Module class: X.Org Video Driver

[    10.480]  ABI class: X.Org Video Driver, version 18.0

[    10.480] (II) LoadModule: "vesa"

[    10.480] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    10.481] (II) Module vesa: vendor="X.Org Foundation"

[    10.481]  compiled for 1.15.99.904, module version = 2.3.3

[    10.481]  Module class: X.Org Video Driver

[    10.481]  ABI class: X.Org Video Driver, version 18.0

[    10.481] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:

  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,

  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,

  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,

  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,

  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,

  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,

  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,

  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200

[    10.482] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    10.483] (II) FBDEV: driver for framebuffer: fbdev

[    10.483] (II) VESA: driver for VESA chipsets: vesa

[    10.483] (++) using VT number 7

[    10.504] (EE) open /dev/dri/card0: No such file or directory

[    10.504] (WW) Falling back to old probe method for modesetting

[    10.504] (EE) open /dev/dri/card0: No such file or directory

[    10.504] (II) Loading sub module "fbdevhw"

[    10.504] (II) LoadModule: "fbdevhw"

[    10.506] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    10.507] (II) Module fbdevhw: vendor="X.Org Foundation"

[    10.507]  compiled for 1.16.4, module version = 0.0.2

[    10.507]  ABI class: X.Org Video Driver, version 18.0

[    10.507] (**) FBDEV(1): claimed PCI slot 0@0:2:0

[    10.507] (II) FBDEV(1): using default device

[    10.507] (WW) Falling back to old probe method for vesa

[    10.507] (EE) Screen 0 deleted because of no matching config section.

[    10.507] (II) UnloadModule: "modesetting"

[    10.507] (II) FBDEV(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    10.507] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32

[    10.507] (==) FBDEV(0): RGB weight 888

[    10.507] (==) FBDEV(0): Default visual is TrueColor

[    10.507] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)

[    10.507] (II) FBDEV(0): hardware: EFI VGA (video memory: 1920kB)

[    10.507] (II) FBDEV(0): checking modes against framebuffer device...

[    10.507] (II) FBDEV(0): checking modes against monitor...

[    10.507] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)

[    10.507] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz

[    10.507] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024  600 604 608 624 -hsync -vsync -csync (46.9 kHz b)

[    10.507] (==) FBDEV(0): DPI set to (96, 96)

[    10.507] (II) Loading sub module "fb"

[    10.507] (II) LoadModule: "fb"

[    10.507] (II) Loading /usr/lib/xorg/modules/libfb.so

[    10.510] (II) Module fb: vendor="X.Org Foundation"

[    10.510]  compiled for 1.16.4, module version = 1.0.0

[    10.510]  ABI class: X.Org ANSI C Emulation, version 0.4

[    10.510] (**) FBDEV(0): using shadow framebuffer

[    10.510] (II) Loading sub module "shadow"

[    10.510] (II) LoadModule: "shadow"

[    10.510] (II) Loading /usr/lib/xorg/modules/libshadow.so

[    10.513] (II) Module shadow: vendor="X.Org Foundation"

[    10.513]  compiled for 1.16.4, module version = 1.1.0

[    10.513]  ABI class: X.Org ANSI C Emulation, version 0.4

[    10.513] (II) UnloadModule: "vesa"

[    10.513] (II) Unloading vesa

[    10.513] (==) Depth 24 pixmap format is 32 bpp

[    10.513] (EE) FBDEV(0): FBIOBLANK: Invalid argument

[    10.521] (==) FBDEV(0): Backing store enabled

[    10.522] (==) FBDEV(0): DPMS enabled

[    10.522] (==) RandR enabled

[    10.526] (II) SELinux: Disabled on system

[    10.527] (II) AIGLX: Screen 0 is not DRI2 capable

[    10.527] (EE) AIGLX: reverting to software rendering

[    10.805] (II) AIGLX: Loaded and initialized swrast

[    10.805] (II) GLX: Initialized DRISWRAST GL provider for screen 0

[    10.920] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[    10.920] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    10.920] (II) LoadModule: "evdev"

[    10.922] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[    10.932] (II) Module evdev: vendor="X.Org Foundation"

[    10.932]  compiled for 1.16.0, module version = 2.9.0

[    10.932]  Module class: X.Org XInput Driver

[    10.932]  ABI class: X.Org XInput driver, version 21.0

[    10.932] (II) Using input driver 'evdev' for 'Power Button'

[    10.932] (**) Power Button: always reports core events

[    10.932] (**) evdev: Power Button: Device: "/dev/input/event5"

[    10.932] (--) evdev: Power Button: Vendor 0 Product 0x1

[    10.932] (--) evdev: Power Button: Found keys

[    10.932] (II) evdev: Power Button: Configuring as keyboard

[    10.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"

[    10.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    10.932] (**) Option "xkb_rules" "evdev"

[    10.932] (**) Option "xkb_model" "pc105"

[    10.932] (**) Option "xkb_layout" "fr"

[    10.932] (**) Option "xkb_variant" "latin9"

[    10.946] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)

[    10.946] (II) No input driver specified, ignoring this device.

[    10.946] (II) This device may have been added with another device file.

[    10.946] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[    10.946] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    10.947] (II) Using input driver 'evdev' for 'Power Button'

[    10.947] (**) Power Button: always reports core events

[    10.947] (**) evdev: Power Button: Device: "/dev/input/event4"

[    10.947] (--) evdev: Power Button: Vendor 0 Product 0x1

[    10.947] (--) evdev: Power Button: Found keys

[    10.947] (II) evdev: Power Button: Configuring as keyboard

[    10.947] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"

[    10.947] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[    10.947] (**) Option "xkb_rules" "evdev"

[    10.947] (**) Option "xkb_model" "pc105"

[    10.947] (**) Option "xkb_layout" "fr"

[    10.947] (**) Option "xkb_variant" "latin9"

[    10.947] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)

[    10.947] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"

[    10.947] (II) Using input driver 'evdev' for 'Sleep Button'

[    10.947] (**) Sleep Button: always reports core events

[    10.947] (**) evdev: Sleep Button: Device: "/dev/input/event3"

[    10.947] (--) evdev: Sleep Button: Vendor 0 Product 0x3

[    10.947] (--) evdev: Sleep Button: Found keys

[    10.947] (II) evdev: Sleep Button: Configuring as keyboard

[    10.947] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"

[    10.947] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)

[    10.947] (**) Option "xkb_rules" "evdev"

[    10.947] (**) Option "xkb_model" "pc105"

[    10.947] (**) Option "xkb_layout" "fr"

[    10.947] (**) Option "xkb_variant" "latin9"

[    10.948] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4072 (/dev/input/event1)

[    10.948] (**) Logitech Unifying Device. Wireless PID:4072: Applying InputClass "evdev pointer catchall"

[    10.948] (**) Logitech Unifying Device. Wireless PID:4072: Applying InputClass "evdev keyboard catchall"

[    10.948] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4072'

[    10.948] (**) Logitech Unifying Device. Wireless PID:4072: always reports core events

[    10.948] (**) evdev: Logitech Unifying Device. Wireless PID:4072: Device: "/dev/input/event1"

[    10.948] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Vendor 0x46d Product 0xc52b

[    10.948] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found 20 mouse buttons

[    10.948] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found scroll wheel(s)

[    10.948] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found relative axes

[    10.948] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found x and y relative axes

[    10.948] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found absolute axes

[    10.948] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Forcing absolute x/y axes to exist.

[    10.948] (--) evdev: Logitech Unifying Device. Wireless PID:4072: Found keys

[    10.948] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Configuring as mouse

[    10.948] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Configuring as keyboard

[    10.948] (II) evdev: Logitech Unifying Device. Wireless PID:4072: Adding scrollwheel support

[    10.948] (**) evdev: Logitech Unifying Device. Wireless PID:4072: YAxisMapping: buttons 4 and 5

[    10.948] (**) evdev: Logitech Unifying Device. Wireless PID:4072: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    10.948] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input1/event1"

[    10.948] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4072" (type: KEYBOARD, id 9)

[    10.948] (**) Option "xkb_rules" "evdev"

[    10.948] (**) Option "xkb_model" "pc105"

[    10.948] (**) Option "xkb_layout" "fr"

[    10.948] (**) Option "xkb_variant" "latin9"

[    10.948] (II) evdev: Logitech Unifying Device. Wireless PID:4072: initialized for relative axes.

[    10.948] (WW) evdev: Logitech Unifying Device. Wireless PID:4072: ignoring absolute axes.

[    10.948] (**) Logitech Unifying Device. Wireless PID:4072: (accel) keeping acceleration scheme 1

[    10.948] (**) Logitech Unifying Device. Wireless PID:4072: (accel) acceleration profile 0

[    10.948] (**) Logitech Unifying Device. Wireless PID:4072: (accel) acceleration factor: 2.000

[    10.948] (**) Logitech Unifying Device. Wireless PID:4072: (accel) acceleration threshold: 4

[    10.948] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4072 (/dev/input/mouse0)

[    10.948] (II) No input driver specified, ignoring this device.

[    10.948] (II) This device may have been added with another device file.

[    10.949] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)

[    10.949] (II) No input driver specified, ignoring this device.

[    10.949] (II) This device may have been added with another device file.

[    10.949] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event9)

[    10.949] (II) No input driver specified, ignoring this device.

[    10.949] (II) This device may have been added with another device file.

[    10.949] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)

[    10.949] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"

[    10.949] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'

[    10.949] (**) Asus WMI hotkeys: always reports core events

[    10.949] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"

[    10.949] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0

[    10.949] (--) evdev: Asus WMI hotkeys: Found keys

[    10.949] (II) evdev: Asus WMI hotkeys: Configuring as keyboard

[    10.949] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event7"

[    10.949] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 10)

[    10.949] (**) Option "xkb_rules" "evdev"

[    10.949] (**) Option "xkb_model" "pc105"

[    10.949] (**) Option "xkb_layout" "fr"

[    10.949] (**) Option "xkb_variant" "latin9"

[    10.949] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[    10.949] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"

[    10.949] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'

[    10.949] (**) AT Translated Set 2 keyboard: always reports core events

[    10.949] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"

[    10.949] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1

[    10.949] (--) evdev: AT Translated Set 2 keyboard: Found keys

[    10.949] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard

[    10.949] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[    10.949] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)

[    10.949] (**) Option "xkb_rules" "evdev"

[    10.949] (**) Option "xkb_model" "pc105"

[    10.949] (**) Option "xkb_layout" "fr"

[    10.949] (**) Option "xkb_variant" "latin9"

[    10.950] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)

[    10.950] (II) No input driver specified, ignoring this device.

[    10.950] (II) This device may have been added with another device file.

[    10.952] (EE) FBDEV(0): FBIOBLANK: Invalid argument

[    18.939] (EE) FBDEV(0): FBIOBLANK: Invalid argument

[    26.055] (EE) FBDEV(0): FBIOBLANK: Invalid argument

ça fais quand même beaucoup de ligne la maintenant je trouve ^^
mais en tout cas mon écran n'est toujours pas detecter ..

hezfry · 26-01-2018 17:34:22

https://image.noelshack.com/fichiers/20 … -33-00.png
voilà exactement ce que ça me met quand je vais dans les paramètres écrans

èfpé · 26-01-2018 17:38:42

Re-,

Un tuto ? Quel tuto ? As-tu lu ne serait-ce qu'en diagonale le retour de commande que tu viens de poster ? Rien n'a changé.

hezfry · 26-01-2018 17:44:28

je vais l'installer en iso, je reviens d'ici 1h-2h j'ai pris la version gnome de ce que tu m'as envoyer en non-free ^^

anonyme · 26-01-2018 18:12:33

Bonsoir
il te faut le firmware et le driver

apt-get --reinstall install xserver-xorg-video-intel firmware-misc-nonfree

 

et ton écran sera bien détecté sur Stretch 9

tu utilise ce driver :

[    10.513] (EE) FBDEV(0): FBIOBLANK: Invalid argument

[    10.521] (==) FBDEV(0): Backing store enabled

[    10.522] (==) FBDEV(0): DPMS enabled

[    10.522] (==) RandR enabled

[    10.526] (II) SELinux: Disabled on system

[    10.527] (II) AIGLX: Screen 0 is not DRI2 capable

[    10.527] (EE) AIGLX: reverting to software rendering

[    10.805] (II) AIGLX: Loaded and initialized swrast

[    10.805] (II) GLX: Initialized DRISWRAST GL provider for screen 0

normalement c'est le noyau qui prend en charge ta carte (KMS) , tu n'a meme plus besoin du paquet "xserver-xorg-video-intel"
les lignes doivent commencer par "modeset" et non pas "FBDEV"

ps : avec intel tu a DRI2 et DRI3 actif il me semble avec mesa 13.xx sur stretch 9

Dernière modification par anonyme (26-01-2018 18:17:35)

hezfry · 26-01-2018 18:36:33

Voilà c'est fais pour l'installation en live et ça marche niquel.
Que faut il que je fasse maintenant que je l'installe en dur ?

hezfry · 26-01-2018 19:16:54

J'ai un problème durant l'installation, lors du partionnement des disques il m'affiche
"l'outil d'installation n'a pas trouvé de méthode pour installer le système de base aucun cd d'installation n'a été trouver et aucun miroir valable n'a été configurer"

èfpé · 26-01-2018 20:12:42

Re-,

Sur quel type de support as-tu copié ou gravé l'image ISO ? clé USB ? DVD-R ? avec quel utilitaire ?
Et surtout n'hésite pas à consulter le wiki dédié ou encore les Cahiers du débutant, si tu as le temps.

hezfry · 26-01-2018 20:18:38

Sur une clef USB et avec rufus coula tout

hezfry · 26-01-2018 20:19:03

Sur une clef USB et avec rufus coula tout

èfpé · 26-01-2018 20:38:42

Re-,

Pour « coula tout » j'ai besoin d'un interprète... quelqu'un dans l'assemblée aurait-il un dictionnaire Djeuns → Quadra ?
Note que Rufus n'est pas l'outil recommandé, surtout si tu installe Debian en mode UEFI... anonyme, tu prends le relais ?

hezfry · 26-01-2018 21:33:03

Désoler c'est le correcteur d'orthographe, sinon c'était voilà tout, lol, et moi avec rufus ça a bien marcher mais je pense que je vais trouver la solution pour installer le debian 9.3, mais faut-il forcément qu'il soit non free ?

èfpé · 26-01-2018 21:48:42

Re-,

Non... d'ailleurs, la voie royale est d'utiliser l'image netinstall ; les firmwares, tu peux les installer par la suite :

apt install firmware-misc-nonfree firmware-realtek

Si tu as du réseau bien sûr, le contrôleur Ethernet semble également avoir besoin d'un firmware.

Dernière modification par èfpé (26-01-2018 21:52:42)

hezfry · 26-01-2018 21:57:15

D'accord c'est ce que je comptait faire, merci beaucoup et je verrais si ça marche que Debian 9 !

Debian-facile

#1 25-01-2018 23:07:59

[Résolu] Problème affichage écran (GNOME) écran inconnu

#2 26-01-2018 00:06:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#3 26-01-2018 00:24:51

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#4 26-01-2018 00:56:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#5 26-01-2018 08:35:35

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#6 26-01-2018 14:40:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#7 26-01-2018 16:11:51

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#8 26-01-2018 16:38:35

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#9 26-01-2018 16:50:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#10 26-01-2018 17:05:08

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#11 26-01-2018 17:14:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#12 26-01-2018 17:30:49

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#13 26-01-2018 17:34:22

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#14 26-01-2018 17:38:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#15 26-01-2018 17:44:28

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#16 26-01-2018 18:12:33

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#17 26-01-2018 18:36:33

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#18 26-01-2018 19:16:54

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#19 26-01-2018 20:12:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#20 26-01-2018 20:18:38

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#21 26-01-2018 20:19:03

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#22 26-01-2018 20:38:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#23 26-01-2018 21:33:03

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#24 26-01-2018 21:48:42

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

#25 26-01-2018 21:57:15

Re : [Résolu] Problème affichage écran (GNOME) écran inconnu

Pied de page des forums