[Résolu !] plus d'accès aux DD ni internet

Béco · 19-02-2018 18:30:23

Bonjour,
Suite au conseil de "croutons" que je remercie pour sa réponse rapide, je recopie le post dans la rubrique "système"

Bonjour à tous,
et d'abord un bravo et un merci à ceux qui mettent leurs compétences et connaissances pour aider les autres.

Je pensais au début que c'était suite à une MAJ mais je me suis rappelé d'avoir été contraint à faire un arrêt "sauvage"suite à un plantage de Libre Office (plus aucun accès sauf la prise de courant) que j'ai totalement perdu tout accès à mon DD puis ensuite au réseau (je tourne grâce à l'iso).
Après quelques recherches (peu fructueuses) j'ai tout de même vu que j'avais un fichier "Xsession-errors" très conséquent mais dont je suis incapable d'y trouver des solutions. Et pourtant, tout marchait si bien avant....Ci-dessous, extraits significatifs du fichier:

$ startxfce4

/usr/bin/startxfce4: X server already running on display :0.0

** (xfce4-session:6452): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
xfce4-session: Another session manager is already running

dans".xsession-errors"

** (handy-update-notifier:1540): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
/usr/bin/handy-update-notifier:18: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk, Notify
/usr/bin/handy-update-notifier:18: PyGIWarning: Notify was imported without specifying a version first. Use gi.require_version('Notify', '0.7') before import to ensure that the right version gets loaded.
from gi.repository import Gtk, Notify

** (gksudo:2113): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

** (thunar:5820): WARNING **: Couldn't register with.....

Merci à celui ou ceux qui pourraient m'indiquer un chemin vers la solution.
PS: je n'ai pas tout compris des balises, désolé.....

Dernière modification par Béco (Aujourd'hui 17:43:29)

Dernière modification par Béco (25-02-2018 16:09:32)

Croutons · 19-02-2018 19:45:58

Tu peux repéré ta partition ext4 avec

fdisk-l

Une fois repéré tu peux lancé
fsck (exemple fsck /dev/sda1)
voir le man

man fsck 

Béco · 20-02-2018 11:56:58

salut
la réponse de fdisk comporte une erreur (c'est nouveau): la partition de boot est sda2 et non sda1 qui est en vfat

 $ sudo fdisk -l

Disk /dev/sda: 465,8 GiB, 500107862016 bytes, 976773168 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disklabel type: dos

Disk identifier: 0x45eddda7

Device     Boot     Start       End   Sectors   Size Id Type

/dev/sda1  *           63  20482874  20482812   9,8G  c W95 FAT32 (LBA)

/dev/sda2        20482875  81931499  61448625  29,3G 83 Linux

/dev/sda3       143364060 567174824 423810765 202,1G 83 Linux

/dev/sda4       567175168 976773119 409597952 195,3G 83 Linux

je recopie ici la réponse de fsck:

fsck -A -t ext2

      fsck from util-linux 2.31.1

      e2fsck 1.43.9 (8-Feb-2018)

      /dev/sda2 is mounted.

      e2fsck: Cannot continue, aborting.

je relance donc la machine à partir de l'iso:

 $ sudo fsck /dev/sda2

fsck from util-linux 2.25.2

e2fsck 1.42.12 (29-Aug-2014)

Linux : propre, 216161/1906320 fichiers, 4922048/7681078 blocs

Cela semble ok donc retour à la case départ.....

Croutons · 20-02-2018 15:14:58

quand tu lance le system en normale tu as la console regarde ce que te renvoi

dmesg

raleur · 20-02-2018 16:13:50

Béco a écrit :

j'ai totalement perdu tout accès à mon DD

Qu'appelles-tu ton DD ?

Béco a écrit :

la réponse de fdisk comporte une erreur (c'est nouveau): la partition de boot est sda2 et non sda1 qui est en vfat

Non, il n'y a pas d'erreur. La partition de boot de Linux n'est pas forcément celle marquée "boot" dans la table de partition. Si GRUB ou LILO est installé dans le MBR, il ne tient pas compte de l'indicateur "boot".

Dernière modification par raleur (20-02-2018 16:14:47)

Béco · 20-02-2018 18:12:17

Bonjour,
Ci-jointes réponses

 $ sudo dmesg

[sudo] mot de passe pour mc :    

[    0.000000] microcode: microcode updated early to revision 0xba, date = 2017-04-09

[    0.000000] Linux version 4.14.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.14.17-1 (2018-02-14)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-amd64 root=UUID=3c3286ec-1217-46cf-9ee7-f02d1b3b4dbf ro quiet splash acpi_osi= acpi_backlight=intel

[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000838d7fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000838d8000-0x0000000083bddfff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x0000000083bde000-0x00000000848d4fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000848d5000-0x00000000848d5fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000848d6000-0x00000000848fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000084900000-0x0000000086e14fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000086e15000-0x000000008775bfff] reserved

[    0.000000] BIOS-e820: [mem 0x000000008775c000-0x0000000087855fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000087856000-0x0000000087b97fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x0000000087b98000-0x0000000087ffdfff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable

[    0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000173ffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] random: fast init done

[    0.000000] SMBIOS 3.0.0 present.

[    0.000000] DMI: Notebook                         W94_95_97JU/W94_95_97JU, BIOS 5.11 03/30/2016

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x174000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: write-back

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable

[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable

[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable

[    0.000000]   3 base 008C000000 mask 7FFC000000 uncachable

[    0.000000]   4 base 008A000000 mask 7FFE000000 uncachable

[    0.000000]   5 base 0089000000 mask 7FFF000000 uncachable

[    0.000000]   6 base 0088800000 mask 7FFF800000 uncachable

[    0.000000]   7 disabled

[    0.000000]   8 disabled

[    0.000000]   9 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  

[    0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000fcc50-0x000fcc5f] mapped at [ffffffffff200c50]

[    0.000000] Base memory trampoline at [ffff88f100095000] 95000 size 24576

[    0.000000] Using GB pages for direct mapping

[    0.000000] BRK [0x0b406000, 0x0b406fff] PGTABLE

[    0.000000] BRK [0x0b407000, 0x0b407fff] PGTABLE

[    0.000000] BRK [0x0b408000, 0x0b408fff] PGTABLE

[    0.000000] BRK [0x0b409000, 0x0b409fff] PGTABLE

[    0.000000] BRK [0x0b40a000, 0x0b40afff] PGTABLE

[    0.000000] BRK [0x0b40b000, 0x0b40bfff] PGTABLE

[    0.000000] BRK [0x0b40c000, 0x0b40cfff] PGTABLE

[    0.000000] BRK [0x0b40d000, 0x0b40dfff] PGTABLE

[    0.000000] BRK [0x0b40e000, 0x0b40efff] PGTABLE

[    0.000000] BRK [0x0b40f000, 0x0b40ffff] PGTABLE

[    0.000000] BRK [0x0b410000, 0x0b410fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x34ac1000-0x36557fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)

[    0.000000] ACPI: XSDT 0x0000000087B62090 00009C (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: FACP 0x0000000087B7AB30 00010C (v05 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: DSDT 0x0000000087B621C0 01896E (v02 ALASKA A M I    01072009 INTL 20120913)

[    0.000000] ACPI: FACS 0x0000000087B97F80 000040

[    0.000000] ACPI: APIC 0x0000000087B7AC40 000084 (v03 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: FPDT 0x0000000087B7ACC8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: FIDT 0x0000000087B7AD10 00009C (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: MCFG 0x0000000087B7ADB0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)

[    0.000000] ACPI: HPET 0x0000000087B7ADF0 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)

[    0.000000] ACPI: SSDT 0x0000000087B7AE28 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)

[    0.000000] ACPI: SSDT 0x0000000087B7B140 001100 (v01 INTEL  PtidDevc 00001000 INTL 20120913)

[    0.000000] ACPI: DBGP 0x0000000087B7C240 000034 (v01 INTEL           00000000 MSFT 0000005F)

[    0.000000] ACPI: DBG2 0x0000000087B7C278 000054 (v00 INTEL           00000000 MSFT 0000005F)

[    0.000000] ACPI: SSDT 0x0000000087B7C2D0 003CDD (v02 SaSsdt SaSsdt   00003000 INTL 20120913)

[    0.000000] ACPI: UEFI 0x0000000087B7FFB0 000042 (v01                 00000000      00000000)

[    0.000000] ACPI: SSDT 0x0000000087B7FFF8 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)

[    0.000000] ACPI: DMAR 0x0000000087B80E50 0000A8 (v01 INTEL  SKL      00000001 INTL 00000001)

[    0.000000] ACPI: ASF! 0x0000000087B80EF8 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000173ffffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x173ff9000-0x173ffdfff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000173ffffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000838d7fff]

[    0.000000]   node   0: [mem 0x0000000083bde000-0x00000000848d4fff]

[    0.000000]   node   0: [mem 0x0000000084900000-0x0000000086e14fff]

[    0.000000]   node   0: [mem 0x000000008775c000-0x0000000087855fff]

[    0.000000]   node   0: [mem 0x0000000087ffe000-0x0000000087ffefff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000173ffffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000173ffffff]

[    0.000000] On node 0 totalpages: 1026937

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3994 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 8560 pages used for memmap

[    0.000000]   DMA32 zone: 547807 pages, LIFO batch:31

[    0.000000]   Normal zone: 7424 pages used for memmap

[    0.000000]   Normal zone: 475136 pages, LIFO batch:31

[    0.000000] Reserving Intel graphics memory at 0x0000000089000000-0x000000008affffff

[    0.000000] ACPI: PM-Timer IO Port: 0x1808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x838d8000-0x83bddfff]

[    0.000000] PM: Registered nosave memory: [mem 0x848d5000-0x848d5fff]

[    0.000000] PM: Registered nosave memory: [mem 0x848d6000-0x848fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x86e15000-0x8775bfff]

[    0.000000] PM: Registered nosave memory: [mem 0x87856000-0x87b97fff]

[    0.000000] PM: Registered nosave memory: [mem 0x87b98000-0x87ffdfff]

[    0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x87ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0x88000000-0x880fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8affffff]

[    0.000000] PM: Registered nosave memory: [mem 0x8b000000-0xdfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]

[    0.000000] e820: [mem 0x8b000000-0xdfffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] percpu: Embedded 44 pages/cpu @ffff88f273c00000 s142232 r8192 d29800 u524288

[    0.000000] pcpu-alloc: s142232 r8192 d29800 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1010868

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-amd64 root=UUID=3c3286ec-1217-46cf-9ee7-f02d1b3b4dbf ro quiet splash acpi_osi= acpi_backlight=intel

[    0.000000] ACPI: _OSI method disabled

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 3925508K/4107748K available (10252K kernel code, 1146K rwdata, 3040K rodata, 1512K init, 664K bss, 182240K reserved, 0K cma-reserved)

[    0.000000] Kernel/User page tables isolation: enabled

[    0.000000] ftrace: allocating 29041 entries in 114 pages

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[    0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns

[    0.000000] hpet clockevent registered

[    0.004000] tsc: Detected 2100.000 MHz processor

[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4224.00 BogoMIPS (lpj=8448000)

[    0.004000] pid_max: default: 32768 minimum: 301

[    0.004000] ACPI: Core revision 20170728

[    0.033461] ACPI: 5 ACPI AML tables successfully acquired and loaded

[    0.033499] Security Framework initialized

[    0.033500] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.033516] AppArmor: AppArmor initialized

[    0.034483] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.034989] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.035014] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.035029] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.035233] CPU: Physical Processor ID: 0

[    0.035234] CPU: Processor Core ID: 0

[    0.035239] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.035240] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[    0.035245] mce: CPU supports 8 MCE banks

[    0.035254] CPU0: Thermal monitoring enabled (TM1)

[    0.035270] process: using mwait in idle threads

[    0.035273] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8

[    0.035273] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4

[    0.035275] Spectre V2 mitigation: Mitigation: Full generic retpoline

[    0.035275] Spectre V2 mitigation: Filling RSB on context switch

[    0.035361] Freeing SMP alternatives memory: 28K

[    0.037236] smpboot: Max logical packages: 2

[    0.037241] DMAR: Host address width 39

[    0.037242] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[    0.037251] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e

[    0.037252] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[    0.037256] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da

[    0.037257] DMAR: RMRR base: 0x000000874fe000 end: 0x0000008751dfff

[    0.037259] DMAR: RMRR base: 0x00000088800000 end: 0x0000008affffff

[    0.037261] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1

[    0.037262] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[    0.037262] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.

[    0.037263] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.

[    0.038761] DMAR-IR: Enabled IRQ remapping in xapic mode

[    0.038762] x2apic: IRQ remapping doesn't support X2APIC mode

[    0.042800] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.082526] TSC deadline timer enabled

[    0.082533] smpboot: CPU0: Intel(R) Pentium(R) CPU 4405U @ 2.10GHz (family: 0x6, model: 0x4e, stepping: 0x3)

[    0.082625] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.

[    0.082658] ... version:                4

[    0.082659] ... bit width:              48

[    0.082659] ... generic registers:      4

[    0.082660] ... value mask:             0000ffffffffffff

[    0.082661] ... max period:             00007fffffffffff

[    0.082661] ... fixed-purpose events:   3

[    0.082662] ... event mask:             000000070000000f

[    0.082710] Hierarchical SRCU implementation.

[    0.083461] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[    0.083474] smp: Bringing up secondary CPUs ...

[    0.083561] x86: Booting SMP configuration:

[    0.083562] .... node  #0, CPUs:      #1 #2 #3

[    0.085820] smp: Brought up 1 node, 4 CPUs

[    0.085820] smpboot: Total of 4 processors activated (16896.00 BogoMIPS)

[    0.088233] devtmpfs: initialized

[    0.088233] x86/mm: Memory block size: 128MB

[    0.088474] PM: Registering ACPI NVS region [mem 0x838d8000-0x83bddfff] (3170304 bytes)

[    0.088474] PM: Registering ACPI NVS region [mem 0x848d5000-0x848d5fff] (4096 bytes)

[    0.088474] PM: Registering ACPI NVS region [mem 0x87856000-0x87b97fff] (3416064 bytes)

[    0.088474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.088474] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.088474] pinctrl core: initialized pinctrl subsystem

[    0.088474] NET: Registered protocol family 16

[    0.088517] cpuidle: using governor ladder

[    0.088517] cpuidle: using governor menu

[    0.088517] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[    0.088517] ACPI: bus type PCI registered

[    0.088517] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.088517] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.088517] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[    0.088517] PCI: Using configuration type 1 for base access

[    0.088792] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages

[    0.088792] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[    0.088792] ACPI: Added _OSI(Module Device)

[    0.088792] ACPI: Added _OSI(Processor Device)

[    0.088792] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.088792] ACPI: Added _OSI(Processor Aggregator Device)

[    0.089007] ACPI: Executed 23 blocks of module-level executable AML code

[    0.104249] ACPI: Dynamic OEM Table Load:

[    0.104256] ACPI: SSDT 0xFFFF88F26E103000 0005BB (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)

[    0.104628] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked

[    0.105331] ACPI: Dynamic OEM Table Load:

[    0.105337] ACPI: SSDT 0xFFFF88F26E1F4800 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)

[    0.105626] ACPI: Dynamic OEM Table Load:

[    0.105626] ACPI: SSDT 0xFFFF88F26E047800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)

[    0.108208] ACPI: Dynamic OEM Table Load:

[    0.108212] ACPI: SSDT 0xFFFF88F26E1AE000 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)

[    0.109939] ACPI: EC: EC started

[    0.109940] ACPI: EC: interrupt blocked

[    0.110183] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC

[    0.110183] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.110183] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions

[    0.110183] ACPI: Interpreter enabled

[    0.110183] ACPI: (supports S0 S3 S4 S5)

[    0.110183] ACPI: Using IOAPIC for interrupt routing

[    0.110183] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.112320] ACPI: Enabled 8 GPEs in block 00 to 7F

[    0.115122] ACPI: Power Resource [PG00] (on)

[    0.115171] ACPI Error: [PEGS] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    0.115241] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PG00._ON, AE_NOT_FOUND (20170728/psparse-550)

[    0.115634] ACPI: Power Resource [PG01] (on)

[    0.115681] ACPI Error: [PEGS] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    0.115747] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG1.PG01._ON, AE_NOT_FOUND (20170728/psparse-550)

[    0.116130] ACPI: Power Resource [PG02] (on)

[    0.116176] ACPI Error: [PEGS] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    0.116243] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG2.PG02._ON, AE_NOT_FOUND (20170728/psparse-550)

[    0.132966] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    0.133034] ACPI Error: Method parse/execution failed \_SB.PAGD._STA, AE_NOT_FOUND (20170728/psparse-550)

[    0.133121] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    0.133186] ACPI Error: Method parse/execution failed \_SB.PAGD._STA, AE_NOT_FOUND (20170728/psparse-550)

[    0.136113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])

[    0.136119] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.136158] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

[    0.136898] PCI host bridge to bus 0000:00

[    0.136901] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.136902] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.136904] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.136905] pci_bus 0000:00: root bus resource [mem 0x8b000000-0xdfffffff window]

[    0.136907] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]

[    0.136909] pci_bus 0000:00: root bus resource [bus 00-fe]

[    0.136918] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000

[    0.137048] pci 0000:00:02.0: [8086:1906] type 00 class 0x030000

[    0.137060] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]

[    0.137067] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]

[    0.137071] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]

[    0.137271] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330

[    0.137296] pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]

[    0.137369] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    0.137533] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000

[    0.137562] pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]

[    0.137642] pci 0000:00:16.0: PME# supported from D3hot

[    0.137792] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601

[    0.137813] pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]

[    0.137821] pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]

[    0.137830] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]

[    0.137838] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]

[    0.137847] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]

[    0.137855] pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]

[    0.137901] pci 0000:00:17.0: PME# supported from D3hot

[    0.138049] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400

[    0.138120] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.138288] pci 0000:00:1c.1: [8086:9d11] type 01 class 0x060400

[    0.138359] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[    0.138551] pci 0000:00:1f.0: [8086:9d43] type 00 class 0x060100

[    0.138797] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000

[    0.138815] pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]

[    0.139002] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300

[    0.139033] pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]

[    0.139068] pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]

[    0.139122] pci 0000:00:1f.3: PME# supported from D3hot D3cold

[    0.139327] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500

[    0.139387] pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]

[    0.139457] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]

[    0.139744] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000

[    0.139777] pci 0000:01:00.0: reg 0x10: [mem 0xdf115000-0xdf115fff]

[    0.139842] pci 0000:01:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]

[    0.139933] pci 0000:01:00.0: supports D1 D2

[    0.139935] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold

[    0.140038] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000

[    0.140069] pci 0000:01:00.1: reg 0x10: [io  0xe000-0xe0ff]

[    0.140097] pci 0000:01:00.1: reg 0x18: [mem 0xdf114000-0xdf114fff 64bit]

[    0.140115] pci 0000:01:00.1: reg 0x20: [mem 0xdf110000-0xdf113fff 64bit]

[    0.140212] pci 0000:01:00.1: supports D1 D2

[    0.140214] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.152032] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.152035] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]

[    0.152038] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]

[    0.152154] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000

[    0.152220] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]

[    0.152438] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold

[    0.164044] pci 0000:00:1c.1: PCI bridge to [bus 02]

[    0.164048] pci 0000:00:1c.1:   bridge window [mem 0xdf000000-0xdf0fffff]

[    0.165207] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    0.165276] ACPI Error: Method parse/execution failed \_SB.PAGD._STA, AE_NOT_FOUND (20170728/psparse-550)

[    0.165422] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.165482] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)

[    0.165539] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.165595] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.165651] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.165707] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.165762] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.165818] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.166291] ACPI: EC: interrupt unblocked

[    0.166306] ACPI: EC: event unblocked

[    0.166318] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.166320] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events

[    0.166394] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[    0.166394] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.166394] pci 0000:00:02.0: vgaarb: bridge control possible

[    0.166394] vgaarb: loaded

[    0.166394] EDAC MC: Ver: 3.0.0

[    0.166394] PCI: Using ACPI for IRQ routing

[    0.194669] PCI: pci_cache_line_size set to 64 bytes

[    0.194734] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]

[    0.194735] e820: reserve RAM buffer [mem 0x838d8000-0x83ffffff]

[    0.194736] e820: reserve RAM buffer [mem 0x848d5000-0x87ffffff]

[    0.194738] e820: reserve RAM buffer [mem 0x86e15000-0x87ffffff]

[    0.194739] e820: reserve RAM buffer [mem 0x87856000-0x87ffffff]

[    0.194740] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]

[    0.194835] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.194835] hpet0: 8 comparators, 64-bit 24.000000 MHz counter

[    0.196020] clocksource: Switched to clocksource hpet

[    0.204796] VFS: Disk quotas dquot_6.6.0

[    0.204819] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.204913] AppArmor: AppArmor Filesystem Enabled

[    0.204930] pnp: PnP ACPI init

[    0.205230] system 00:00: [io  0x0680-0x069f] has been reserved

[    0.205232] system 00:00: [io  0xffff] has been reserved

[    0.205234] system 00:00: [io  0xffff] has been reserved

[    0.205236] system 00:00: [io  0xffff] has been reserved

[    0.205237] system 00:00: [io  0x1800-0x18fe] has been reserved

[    0.205239] system 00:00: [io  0x164e-0x164f] has been reserved

[    0.205241] system 00:00: [io  0x3322-0x3323] has been reserved

[    0.205246] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.205359] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.205399] system 00:02: [io  0x1854-0x1857] has been reserved

[    0.205403] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    0.205433] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)

[    0.205561] pnp 00:04: Plug and Play ACPI device, IDs SYN1217 PNP0f13 (active)

[    0.205793] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved

[    0.205795] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved

[    0.205797] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved

[    0.205798] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved

[    0.205800] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.205802] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved

[    0.205804] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved

[    0.205806] system 00:05: [mem 0xff000000-0xffffffff] has been reserved

[    0.205808] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved

[    0.205809] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved

[    0.205813] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.205854] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved

[    0.205856] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved

[    0.205858] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved

[    0.205860] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved

[    0.205862] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved

[    0.205863] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved

[    0.205865] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved

[    0.205869] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.206181] system 00:07: [io  0xff00-0xfffe] has been reserved

[    0.206185] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.207402] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved

[    0.207404] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved

[    0.207406] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved

[    0.207408] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved

[    0.207410] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved

[    0.207413] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.207838] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    0.207941] ACPI Error: Method parse/execution failed \_SB.PAGD._STA, AE_NOT_FOUND (20170728/psparse-550)

[    0.208318] pnp: PnP ACPI: found 9 devices

[    0.215972] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.215993] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.215995] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]

[    0.216000] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]

[    0.216029] pci 0000:00:1c.1: PCI bridge to [bus 02]

[    0.216032] pci 0000:00:1c.1:   bridge window [mem 0xdf000000-0xdf0fffff]

[    0.216040] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.216042] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.216043] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.216045] pci_bus 0000:00: resource 7 [mem 0x8b000000-0xdfffffff window]

[    0.216046] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]

[    0.216048] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]

[    0.216049] pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf1fffff]

[    0.216051] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]

[    0.216201] NET: Registered protocol family 2

[    0.216342] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[    0.216402] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.216502] TCP: Hash tables configured (established 32768 bind 32768)

[    0.216529] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.216545] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.216602] NET: Registered protocol family 1

[    0.216616] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.217242] PCI: CLS 0 bytes, default 64

[    0.217279] Unpacking initramfs...

[    0.711274] Freeing initrd memory: 27228K

[    0.711345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    0.711349] software IO TLB [mem 0x7f8d8000-0x838d8000] (64MB) mapped at [ffff88f17f8d8000-ffff88f1838d7fff]

[    0.711386] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns

[    0.711768] audit: initializing netlink subsys (disabled)

[    0.711868] audit: type=2000 audit(1519143888.708:1): state=initialized audit_enabled=0 res=1

[    0.712293] workingset: timestamp_bits=40 max_order=20 bucket_order=0

[    0.712389] zbud: loaded

[    1.023515] Key type asymmetric registered

[    1.023516] Asymmetric key parser 'x509' registered

[    1.023533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)

[    1.023594] io scheduler noop registered

[    1.023595] io scheduler deadline registered

[    1.023609] io scheduler cfq registered (default)

[    1.023610] io scheduler mq-deadline registered

[    1.024115] intel_idle: MWAIT substates: 0x11142120

[    1.024116] intel_idle: v0.4.1 model 0x4E

[    1.024341] intel_idle: lapic_timer_reliable_states 0xffffffff

[    1.024621] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    1.025150] Linux agpgart interface v0.103

[    1.025199] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

[    1.025200] AMD IOMMUv2 functionality not available on this system

[    1.025526] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12

[    1.573773] i8042: Detected active multiplexing controller, rev 1.1

[    1.576112] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.576116] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[    1.576140] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[    1.576158] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[    1.576175] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[    1.576316] mousedev: PS/2 mouse device common for all mice

[    1.576360] rtc_cmos 00:01: RTC can wake from S4

[    1.576763] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0

[    1.576878] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

[    1.576885] intel_pstate: Intel P-state driver initializing

[    1.577311] intel_pstate: HWP enabled

[    1.577509] ledtrig-cpu: registered to indicate activity on CPUs

[    1.577821] NET: Registered protocol family 10

[    1.578118] Segment Routing with IPv6

[    1.578132] mip6: Mobile IPv6

[    1.578133] NET: Registered protocol family 17

[    1.578135] mpls_gso: MPLS GSO support

[    1.578531] microcode: sig=0x406e3, pf=0x80, revision=0xba

[    1.578653] microcode: Microcode Update Driver: v2.2.

[    1.578665] sched_clock: Marking stable (1578645057, 0)->(1579938154, -1293097)

[    1.579014] registered taskstats version 1

[    1.579029] zswap: loaded using pool lzo/zbud

[    1.579157] AppArmor: AppArmor sha1 policy hashing enabled

[    1.579159] ima: No TPM chip found, activating TPM-bypass! (rc=-19)

[    1.579470] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    1.579961] rtc_cmos 00:01: setting system clock to 2018-02-20 16:24:50 UTC (1519143890)

[    1.581526] Freeing unused kernel memory: 1512K

[    1.581527] Write protecting the kernel read-only data: 16384k

[    1.582035] Freeing unused kernel memory: 2012K

[    1.583924] Freeing unused kernel memory: 1056K

[    1.589348] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    1.589349] x86/mm: Checking user space page tables

[    1.594554] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    1.674172] ACPI: bus type USB registered

[    1.674199] usbcore: registered new interface driver usbfs

[    1.674211] usbcore: registered new interface driver hub

[    1.674246] usbcore: registered new device driver usb

[    1.674529] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    1.674539] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control

[    1.677969] SCSI subsystem initialized

[    1.684847] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

[    1.684940] thermal LNXTHERM:00: registered as thermal_zone0

[    1.684942] ACPI: Thermal Zone [TZ0] (45 C)

[    1.685468] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    1.685480] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

[    1.686590] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810

[    1.686598] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    1.687475] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.687478] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.687480] usb usb1: Product: xHCI Host Controller

[    1.687481] usb usb1: Manufacturer: Linux 4.14.0-3-amd64 xhci-hcd

[    1.687483] usb usb1: SerialNumber: 0000:00:14.0

[    1.687639] hub 1-0:1.0: USB hub found

[    1.687662] hub 1-0:1.0: 12 ports detected

[    1.688429] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    1.688435] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

[    1.688488] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003

[    1.688490] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.688493] usb usb2: Product: xHCI Host Controller

[    1.688495] usb usb2: Manufacturer: Linux 4.14.0-3-amd64 xhci-hcd

[    1.688496] usb usb2: SerialNumber: 0000:00:14.0

[    1.688637] hub 2-0:1.0: USB hub found

[    1.688650] hub 2-0:1.0: 4 ports detected

[    1.689312] i801_smbus 0000:00:1f.4: SPD Write Disable is set

[    1.689353] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt

[    1.690955] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

[    1.691064] ACPI Error: Method parse/execution failed \_SB.PAGD._STA, AE_NOT_FOUND (20170728/psparse-550)

[    1.692077] libata version 3.00 loaded.

[    1.693123] SSE version of gcm_enc/dec engaged.

[    1.695058] ahci 0000:00:17.0: version 3.0

[    1.695542] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode

[    1.695547] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 

[    1.701060] r8169 0000:01:00.1 eth0: RTL8411 at 0xffffb38540675000, 80:fa:5b:30:05:b6, XID 1c800800 IRQ 124

[    1.701063] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

[    1.704132] scsi host0: ahci

[    1.704682] scsi host1: ahci

[    1.704749] ata1: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b100 irq 123

[    1.704752] ata2: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b180 irq 123

[    1.712088] clocksource: Switched to clocksource tsc

[    2.019169] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.022455] ata2.00: ATAPI: TSSTcorp CDDVDW SU-208HB, TC00, max UDMA/100

[    2.024011] usb 1-5: new full-speed USB device number 2 using xhci_hcd

[    2.024906] ata2.00: configured for UDMA/100

[    2.027169] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    2.056881] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133

[    2.056883] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)

[    2.095864] ata1.00: configured for UDMA/133

[    2.096057] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5

[    2.100750] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SU-208HB  TC00 PQ: 0 ANSI: 5

[    2.162321] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

[    2.162323] sd 0:0:0:0: [sda] 4096-byte physical blocks

[    2.162341] sd 0:0:0:0: [sda] Write Protect is off

[    2.162344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.162367] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.173738] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a

[    2.173740] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.180163] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[    2.180166] cdrom: Uniform CD-ROM driver Revision: 3.20

[    2.180308] sr 1:0:0:0: Attached scsi CD-ROM sr0

[    2.226985]  sda: sda1 sda2 sda3 sda4

[    2.227481] sd 0:0:0:0: [sda] Attached SCSI disk

[    2.300053] usb 1-6: new high-speed USB device number 3 using xhci_hcd

[    2.489205] usb 1-6: New USB device found, idVendor=04f2, idProduct=b551

[    2.489207] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2

[    2.489209] usb 1-6: Product: Chicony USB 2.0 Camera

[    2.489211] usb 1-6: Manufacturer: Generic

[    2.489212] usb 1-6: SerialNumber: 200901010001

[    2.620013] usb 1-8: new full-speed USB device number 4 using xhci_hcd

[    2.770616] usb 1-8: New USB device found, idVendor=046d, idProduct=c534

[    2.770618] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.770619] usb 1-8: Product: USB Receiver

[    2.770621] usb 1-8: Manufacturer: Logitech

[    2.774025] hidraw: raw HID events driver (C) Jiri Kosina

[    2.777831] usbcore: registered new interface driver usbhid

[    2.777833] usbhid: USB HID core driver

[    2.864380] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C534.0001/input/input7

[    2.897169] psmouse serio2: synaptics: queried max coordinates: x [..5712], y [..4872]

[    2.924203] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0

[    2.924457] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0002/input/input8

[    2.984378] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1

[    3.014862] psmouse serio2: synaptics: queried min coordinates: x [1336..], y [1122..]

[    3.014866] psmouse serio2: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.

[    3.164569] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3175, fw id: 2024995

[    3.205183] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6

[    3.212639] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem

[    3.228610] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)

[    4.510381] random: crng init done

[    5.848785] ip_tables: (C) 2000-2006 Netfilter Core Team

[    5.960373] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)

[    5.980428] systemd[1]: Detected architecture x86-64.

[    6.023632] systemd[1]: Set hostname to <handylinux>.

[    7.002448] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.

[    7.002454] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)

[    7.895626] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[    7.895872] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[    7.896071] systemd[1]: Created slice User and Session Slice.

[    7.896084] systemd[1]: Reached target System Time Synchronized.

[    7.896095] systemd[1]: Reached target Remote File Systems.

[    8.596758] lp: driver loaded but no devices found

[    8.628877] ppdev: user-space parallel port driver

[    8.828169] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro

[    9.271500] systemd-journald[237]: Received request to flush runtime journal from PID 1

[   11.403198] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11

[   11.403229] ACPI: Power Button [PWRB]

[   11.403300] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12

[   11.403324] ACPI: Sleep Button [SLPB]

[   11.403433] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13

[   11.403476] ACPI: Lid Switch [LID0]

[   11.403554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14

[   11.403571] ACPI: Power Button [PWRF]

[   11.664898] ACPI: AC Adapter [AC] (on-line)

[   11.720474] ACPI: Battery Slot [BAT0] (battery absent)

[   12.153117] iTCO_vendor_support: vendor-support=0

[   12.458562] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[   12.458726] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)

[   12.458923] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[   12.526566] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   12.782897] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   12.782942] sr 1:0:0:0: Attached scsi generic sg1 type 5

[   13.003499] mei_me 0000:00:16.0: enabling device (0000 -> 0002)

[   13.133272] input: PC Speaker as /devices/platform/pcspkr/input/input15

[   13.984396] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer

[   13.984398] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules

[   13.984400] RAPL PMU: hw unit of domain package 2^-14 Joules

[   13.984402] RAPL PMU: hw unit of domain dram 2^-14 Joules

[   13.984403] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules

[   13.984404] RAPL PMU: hw unit of domain psys 2^-14 Joules

[   14.471512] Bluetooth: Core ver 2.22

[   14.471525] NET: Registered protocol family 31

[   14.471526] Bluetooth: HCI device and connection manager initialized

[   14.471529] Bluetooth: HCI socket layer initialized

[   14.471531] Bluetooth: L2CAP socket layer initialized

[   14.471538] Bluetooth: SCO socket layer initialized

[   14.733256] usbcore: registered new interface driver btusb

[   14.738396] [drm] Memory usable by graphics device = 4096M

[   14.738398] [drm] Replacing VGA console driver

[   14.740108] Console: switching to colour dummy device 80x25

[   14.746096] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[   14.746097] [drm] Driver supports precise vblank timestamp query.

[   14.748335] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[   14.748851] Bluetooth: hci0: read Intel version: 370810011003110e00

[   14.772597] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0

[   14.774587] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[   14.775175] acpi device:0f: registered as cooling_device4

[   14.775263] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16

[   14.781864] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[   14.790894] fbcon: inteldrmfb (fb0) is primary device

[   14.882786] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq

[   14.882790] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq

[   15.105849] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated

[   15.808286] [drm] RC6 on

[   16.421494] Intel(R) Wireless WiFi driver for Linux

[   16.421495] Copyright(c) 2003- 2015 Intel Corporation

[   16.648597] Console: switching to colour frame buffer device 170x48

[   16.653112] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin

[   16.653790] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)

[   16.678174] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[   16.917149] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode

[   16.917531] iwlwifi 0000:02:00.0: loaded firmware version 29.541020.0 op_mode iwlmvm

[   17.847013] media: Linux media interface: v0.10

[   18.292863] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[   18.292867] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[   18.292870] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)

[   18.292871] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[   18.292873] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[   18.292875] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18

[   18.292878] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12

[   18.637098] Linux video capture interface: v2.00

[   18.961314] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7265, REV=0x210

[   18.979287] iwlwifi 0000:02:00.0: base HW address: 10:02:b5:96:c0:df

[   19.109191] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b551)

[   19.111624] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!

[   19.111627] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!

[   19.111630] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!

[   19.111632] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!

[   19.111727] input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input20

[   19.111864] usbcore: registered new interface driver uvcvideo

[   19.111866] USB Video Class driver (1.1.1)

[   19.151223] intel_rapl: Found RAPL domain package

[   19.151225] intel_rapl: Found RAPL domain core

[   19.151227] intel_rapl: Found RAPL domain uncore

[   19.151228] intel_rapl: Found RAPL domain dram

[   19.461448] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'

[   19.461918] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

[   19.461958] thermal thermal_zone2: failed to read out thermal zone (-61)

[   20.081093] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17

[   20.083450] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18

[   20.083539] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19

[   20.083617] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21

[   20.083696] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22

[   20.083771] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23

[   21.165687] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   21.165690] Bluetooth: BNEP filters: protocol multicast

[   21.165696] Bluetooth: BNEP socket layer initialized

[   51.589089] fuse init (API version 7.26)

Pour raleur
les partitions (autres que sda2) ne peuvent plus être montées, la réponse est:
#Impossible de monter "sda3"
Not authorized to perform operation.#
Idem pour sda4 ou sda1

J'ai effectivement Grub qui est installé mais auparavant, "fdisk" indiquait bien le boot sur sda2

Merci pour vos interventions, bon courage car il y a du boulot pour éplucher le retour de "dmesg"

raleur · 20-02-2018 23:01:11

Pas besoin de passer des heures à éplucher les logs du noyau pour voir qu'ils ne contiennent rien d'intéressant (ni d'anormal pour le coup).
Comment essaies-tu de monter les partitions ? As-tu essayé en root avec la commande mount ?
Je répète : si GRUB est installé dans le MBR, la position de l'indicateur boot n'a aucune importance.

Béco · 21-02-2018 10:46:55

Bonjour raleur et merci de ton intervention,

J'ai effectué "dmsg" suite à la demande de croutons (pour moi, c'est en dehors de mes connaissances....).

Si j'essaie de monter les partitions en mode root, la réponse est que la partition demandée ne peut pas être trouvée dans /etc/fstab.
/etc/fstab ne comprend que la partition de boot soit sda2.
J'ai essayé d'y rajouter les 3 autres partitions mais dès que la modif est enregistrée, les partitions disparaissent du gestionnaire de fichiers. Ne voulant pas faire de nouvelles conn.....,j'ai mis les nouvelles lignes en commentaire avec #.
J'ai aussi utilisé à nouveau chown et chmod pour m'assurer d'avoir les droits mais rien n'y fait.
C'est au cours de ces tentatives que ma liaison Etherrnet s'est interrompue soudainement et reste non rétablie: même l'icône de liaison en bas à droite a disparue. J'utilise Firefox qui se lance normalement mais ne trouve aucune adresse comme en absence de connexion.

A très bientôt j'espère...

Dernière modification par Béco (21-02-2018 10:49:10)

raleur · 21-02-2018 13:19:14

Béco a écrit :

Si j'essaie de monter les partitions en mode root, la réponse est que la partition demandée ne peut pas être trouvée dans /etc/fstab.

Tu n'utilises pas la commande mount comme il faut. Il faut indiquer la partition à monter et le point de montage (répertoire vide existant).

Croutons · 21-02-2018 13:47:19

voir wiki DF mount

Dernière modification par Croutons (21-02-2018 13:47:38)

Béco · 21-02-2018 17:06:57

Tu n'utilises pas la commande mount comme il faut. Il faut indiquer la partition à monter et le point de montage (répertoire vide existant)

J'avais déjà essayer mount "comme il faut" sauf que mon point de montage s'est avéré être un fichier et non un dossier ou répertoire d'où l'échec.
Donc la partition se monte bien avec: "sudo mount -t ext2 /dev/sda3 /mnt/sda3". J'ai vérifié avec "mount" seul: c'est ok. Par contre la partition montée n'apparait plus en clair dans le gestionnaire de fichiers (c'est ce qui m'avait un peu rebuté) mais je l'ai retrouvée dans son point de montage /mnt/sda3. J'essaierai de rétablir son affichage dans la rubrique "périphériques du gestionnaire de fichiers", je pense que ce sera mieux que d'aller dans le système de fichiers.
Ou bien pourquoi ne pas activer /etc/fstab pour que les partitions soient montées au démarrage? Il y a-t-il un risque côté sécurité à laisser des partitions montées même si je suis seul utilisateur?
Donc merci pour cette partie résolue, reste la connexion Internet à rétablir....Je vais chercher mais ce sera sans doute un peu long car ma connexion actuelle est faite sur un vieux portable HP grâce à Toutou Linux, ça marche mais ça rame dur, on a le temps d'aller prendre un café pendant le chargement d'une page....
Et merci encore...
PS: mais le mountage semble ne pouvoir se faire qu'en root,je vais explorer...

Dernière modification par Béco (21-02-2018 17:12:08)

Croutons · 21-02-2018 17:59:04

Que donne le contenu de ton dossier fstab?

cat /etc/fstab

Par contre la partition montée n'apparait plus en clair dans le gestionnaire de fichiers (c'est ce qui m'avait un peu rebuté) mais je l'ai retrouvée dans son point de montage /mnt/sda3.

oui c'est normale la partition monté est accessible par son point de montage, si ton profile est toujours a jour tu utilise sans doute Thunar comme gestionnaire, le choix d'affichage du panneau lateral est sur raccourcis (Ctrl+B)
Si tu veux un raccourci vers ta partition sda3 il te faut cliquer et déposer (en maintenant le clique enfoncé) le point de montage sur l'icone de la maison tu verras une sorte de maillon de chaine qui indique qu'un lien va être créé
Apres tu peux même renommé le raccourci

Dernière modification par Croutons (21-02-2018 18:04:46)

Béco · 21-02-2018 18:30:42

Merci croutons,
mon gestionnaire de fichiers n'a pas le même aspect mais le principe est identique et génère un lien vers le point de montage.
Par contre ce lien ne fonctionne que si la partition a été montée et pour l'instant cela ne reste possible qu'en root, idem pour le démontage.

Croutons · 21-02-2018 18:39:46

oui en root , mais tu peux les monter dans le fichier fstab, ou utiliser pmount
Puis il faut pas faire comme moi , le mieux est de respecter le FHS
mais bon j'ai mes sauvegardes en place pas envie de changer de point de montage

Béco · 21-02-2018 19:10:25

Je regarde tout ça mais il me semble que pmount est pour les clés usb ou autres périphériques extérieur.
De toute manière, il reste anormal que le montage ou démontage ne puisse se faire qu'en root.
Et en plus pas pratique du tout ! ! !

Croutons · 21-02-2018 20:55:50

ba si normal c'est une tache administrateur, en générale les supports amovible sont montés en automatique mais pas les partitions interne
par contre si tu les déclares dans le fstab oui
Tu peux même mettre les options de montage pour qu'un utilisateur puisque la monter
https://debian-facile.org/doc:systeme:fstab

Dernière modification par Croutons (22-02-2018 09:23:25)

raleur · 21-02-2018 21:51:21

Béco a écrit :

J'avais déjà essayer mount "comme il faut" sauf que mon point de montage s'est avéré être un fichier et non un dossier ou répertoire d'où l'échec.

Utiliser un fichier comme point de montage, je n'appelle pas ça "comme il faut".

Croutons a écrit :

c'est une tache administrateur

En effet. On ne va quand même pas laisser n'importe quel utilisateur monter n'importe quel système de fichiers n'importe où.

Béco · 22-02-2018 10:46:01

Bonjour,

Croutons a écrit :

par contre si tu les déclares dans le fstab

Avant cet arrêt à l'arrache et donc mes ennuis, je ne connaissais pas fstab et donc ce qu'il pouvait contenir.
Pour l'instant fstab ne comporte que la partition de boot (sda2 pour moi) et je doute que les autres partitions se soient effacées toutes seules de ce fichier (à moins que, je me trompe peut-être....). Par contre, je pouvais accéder à ces partitions sans même avoir besoin de m'identifier (suite à modiff avec chown).
Et je n'ai pas trouver de traces de l'endroit où ces partitions pouvaient bien être montées.

Croutons a écrit :

par contre si tu les déclares dans le fstab oui
Tu peux même mettre les options de montage pour qu'un utilisateur puisque la monter

J'ai vu cette contradiction à plusieurs reprises donc on ne sait pas si les partitions sont montées ou non au démarrage et pourtant je cite la doc: "Le fichier /etc/fstab est une liste des systèmes de fichiers qui seront mountées automatiquement à l'initialisation du système."

raleur a écrit :

Utiliser un fichier comme point de montage, je n'appelle pas ça "comme il faut"

C'est bien la raison pour laquelle j'avais placé "comme il faut" entre guillemets puisque le "comme il faut" ne l'était pas du tout: erreur de départ lors de la création des points de montage. Ensuite, pour me trouver une excuse:D, la différence d'icône entre un fichier et un dossier n'est pas très flagrante.

A +

raleur · 22-02-2018 12:06:02

Béco a écrit :

J'ai vu cette contradiction à plusieurs reprises donc on ne sait pas si les partitions sont montées ou non au démarrage et pourtant je cite la doc: "Le fichier /etc/fstab est une liste des systèmes de fichiers qui seront mountées automatiquement à l'initialisation du système."

Cette phrase est inexacte. fstab peut contenir des systèmes de fichiers non montés automatiquement au démarrage, s'ils ont l'option "noauto".
Cela permet notamment de déclarer des systèmes de fichiers précis qui pourront être montés par un utilisateur normal (grâce à l'option "user") sur le point de montage défini et avec les options spécifiées. Cela évite donc que l'utilisateur fasse n'importe quoi.

Béco a écrit :

la différence d'icône entre un fichier et un dossier n'est pas très flagrante.

Pardon ? Il n'y a pas d'icône en ligne de commande.

Dernière modification par raleur (22-02-2018 14:36:44)

Croutons · 22-02-2018 12:42:32

Bonjour
Etrange , a ma connaissance rien comme option pour monter une partition d'un disque interne en automatique si elle est pas déclaré dans le fichier fstab
avec un support amovible on peut, le point de montage sera dans un sous répertoire /media

Comme dit raleur tu peux déclaré tes partitions dans le fichier fstab et mettre l'option noauto, la partition sera monté sur demande
Normalement tu auras un raccourci dans le panneau lateral du gestionnaire de fichier comme tu peux le voir sur mon image gif plus haut (le raccouci est grisé quand non monté)

Béco · 22-02-2018 20:04:54

raleur a écrit :

Cette phrase est inexacte. fstab peut contenir des systèmes de fichiers non montés automatiquement au démarrage, s'ils ont l'option "noauto".

C'est pourtant très exactement la phrase du wiki et on retrouve cette même phrase sur beaucoup d'autres sites. Ce serait sans doute une bonne chose que cette phrase soit supprimée ou du moins modifiée pour supprimer toute ambiguïté.

Croutons a écrit :

Comme dit raleur tu peux déclaré tes partitions dans le fichier fstab et mettre l'option noauto, la partition sera monté sur demande

Merci, c'est ce que je vais faire maintenant que l'incertitude sur fstab est levée.
Je répète que mon fstab ne comporte que la partition de boot, donc je pose sérieusement la question: les 3 autres lignes des 3 autres partitions se seraient évaporées ???
Par contre, mes recherches pour tenter de rétablir ma connexion réseau n'ont pas été très fructueuses....
A+

Croutons · 22-02-2018 20:33:51

merci pour la remarque , j'ai changé la description dans le wiki

raleur · 22-02-2018 20:36:25

Béco a écrit :

mon fstab ne comporte que la partition de boot

Ce n'est pas la partition de boot mais la partition racine de ton système. Avec GRUB il n'y a pas vraiment de partition de boot. Il peut aller chercher des éléments dans plusieurs partitions différentes pour amorcer un système.

Béco · 25-02-2018 16:05:27

Bonjour,

raleur a écrit :

Ce n'est pas la partition de boot mais la partition racine de ton système.

Raleur fait ici une remarque parfaitement justifiée, il est important d'appeler les choses par leur nom exact sinon c'est la porte ouverte à toutes sortes de "misunderstanding".

Par ailleurs, étant donné que ma question sur la disparition des 3 lignes du fichier fstab n'a pas inspiré beaucoup d'explications ou d'avis, idem pour mon problème d'accès au web que j'ai réussi à résoudre partiellement, je mets cette discussion en résolu même si ce n'est pas vraiment exact (mais comme cela n'avance plus...)

A+ et merci pour votre aide

smolski · 25-02-2018 16:18:34

Pour visionner les partitions, que renvoie la commande blkid :

blkid

Le tuto : https://debian-facile.org/doc:systeme:blkid

Debian-facile

#1 19-02-2018 18:30:23

[Résolu !] plus d'accès aux DD ni internet

#2 19-02-2018 19:45:58

Re : [Résolu !] plus d'accès aux DD ni internet

#3 20-02-2018 11:56:58

Re : [Résolu !] plus d'accès aux DD ni internet

#4 20-02-2018 15:14:58

Re : [Résolu !] plus d'accès aux DD ni internet

#5 20-02-2018 16:13:50

Re : [Résolu !] plus d'accès aux DD ni internet

#6 20-02-2018 18:12:17

Re : [Résolu !] plus d'accès aux DD ni internet

#7 20-02-2018 23:01:11

Re : [Résolu !] plus d'accès aux DD ni internet

#8 21-02-2018 10:46:55

Re : [Résolu !] plus d'accès aux DD ni internet

#9 21-02-2018 13:19:14

Re : [Résolu !] plus d'accès aux DD ni internet

#10 21-02-2018 13:47:19

Re : [Résolu !] plus d'accès aux DD ni internet

#11 21-02-2018 17:06:57

Re : [Résolu !] plus d'accès aux DD ni internet

#12 21-02-2018 17:59:04

Re : [Résolu !] plus d'accès aux DD ni internet

#13 21-02-2018 18:30:42

Re : [Résolu !] plus d'accès aux DD ni internet

#14 21-02-2018 18:39:46

Re : [Résolu !] plus d'accès aux DD ni internet

#15 21-02-2018 19:10:25

Re : [Résolu !] plus d'accès aux DD ni internet

#16 21-02-2018 20:55:50

Re : [Résolu !] plus d'accès aux DD ni internet

#17 21-02-2018 21:51:21

Re : [Résolu !] plus d'accès aux DD ni internet

#18 22-02-2018 10:46:01

Re : [Résolu !] plus d'accès aux DD ni internet

#19 22-02-2018 12:06:02

Re : [Résolu !] plus d'accès aux DD ni internet

#20 22-02-2018 12:42:32

Re : [Résolu !] plus d'accès aux DD ni internet

#21 22-02-2018 20:04:54

Re : [Résolu !] plus d'accès aux DD ni internet

#22 22-02-2018 20:33:51

Re : [Résolu !] plus d'accès aux DD ni internet

#23 22-02-2018 20:36:25

Re : [Résolu !] plus d'accès aux DD ni internet

#24 25-02-2018 16:05:27

Re : [Résolu !] plus d'accès aux DD ni internet

#25 25-02-2018 16:18:34

Re : [Résolu !] plus d'accès aux DD ni internet

Pied de page des forums