[ 0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[ 0.000000] Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=71d4c532-c8d0-4b93-9dd8-c8a0711a2201 ro single
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd709fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd70a000-0x00000000dda1bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dda1c000-0x00000000dda2bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dda2c000-0x00000000ddb4bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddb4c000-0x00000000de82bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de82c000-0x00000000de82cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de82d000-0x00000000de86ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de870000-0x00000000deca1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000deca2000-0x00000000deff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8H61-M LX3 PLUS R2.0, BIOS 1102 06/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FF0000000 write-back
[ 0.000000] 2 base 210000000 mask FF8000000 write-back
[ 0.000000] 3 base 218000000 mask FFC000000 write-back
[ 0.000000] 4 base 21C000000 mask FFE000000 write-back
[ 0.000000] 5 base 21E000000 mask FFF000000 write-back
[ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff97e3400fd740]
[ 0.000000] Base memory trampoline at [ffff97e340098000] 98000 size 24576
[ 0.000000] BRK [0x58f39000, 0x58f39fff] PGTABLE
[ 0.000000] BRK [0x58f3a000, 0x58f3afff] PGTABLE
[ 0.000000] BRK [0x58f3b000, 0x58f3bfff] PGTABLE
[ 0.000000] BRK [0x58f3c000, 0x58f3cfff] PGTABLE
[ 0.000000] BRK [0x58f3d000, 0x58f3dfff] PGTABLE
[ 0.000000] BRK [0x58f3e000, 0x58f3efff] PGTABLE
[ 0.000000] BRK [0x58f3f000, 0x58f3ffff] PGTABLE
[ 0.000000] BRK [0x58f40000, 0x58f40fff] PGTABLE
[ 0.000000] BRK [0x58f41000, 0x58f41fff] PGTABLE
[ 0.000000] BRK [0x58f42000, 0x58f42fff] PGTABLE
[ 0.000000] BRK [0x58f43000, 0x58f43fff] PGTABLE
[ 0.000000] BRK [0x58f44000, 0x58f44fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b2d000-0x36d8dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DDA20078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DDA29E30 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DDA20180 009CAF (v02 ALASKA A M I 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DDB4A080 000040
[ 0.000000] ACPI: APIC 0x00000000DDA29F40 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DDA29FB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DDA2A000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DDA2A040 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DDA2A078 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DDA2B9B0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DDA2A568 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DDA2AF18 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21eff7000-0x21effbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dd709fff]
[ 0.000000] node 0: [mem 0x00000000de82c000-0x00000000de82cfff]
[ 0.000000] node 0: [mem 0x00000000de870000-0x00000000deca1fff]
[ 0.000000] node 0: [mem 0x00000000deff4000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 2083558
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14126 pages used for memmap
[ 0.000000] DMA32 zone: 904009 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd70a000-0xdda1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdda1c000-0xdda2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdda2c000-0xddb4bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddb4c000-0xde82bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde82d000-0xde86ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdeca2000-0xdeff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff97e55ec00000 s105240 r8192 d29928 u524288
[ 0.000000] pcpu-alloc: s105240 r8192 d29928 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2050979
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=71d4c532-c8d0-4b93-9dd8-c8a0711a2201 ro single
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8102008K/8334232K available (6236K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 232224K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3300.065 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.13 BogoMIPS (lpj=13200260)
[ 0.000131] pid_max: default: 32768 minimum: 301
[ 0.000195] ACPI: Core revision 20160831
[ 0.004560] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.004688] Security Framework initialized
[ 0.004742] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004802] AppArmor: AppArmor disabled by boot time parameter
[ 0.005160] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006700] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007430] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.007493] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.007764] CPU: Physical Processor ID: 0
[ 0.007818] CPU: Processor Core ID: 0
[ 0.007873] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007928] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007985] mce: CPU supports 7 MCE banks
[ 0.008044] CPU0: Thermal monitoring enabled (TM1)
[ 0.008104] process: using mwait in idle threads
[ 0.008160] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.008214] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.008270] Spectre V2 : Mitigation: Full generic retpoline
[ 0.008696] Freeing SMP alternatives memory: 24K
[ 0.010322] ftrace: allocating 25236 entries in 99 pages
[ 0.027648] smpboot: Max logical packages: 2
[ 0.028090] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067832] TSC deadline timer enabled
[ 0.067834] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.068024] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.068309] ... version: 3
[ 0.068363] ... bit width: 48
[ 0.068416] ... generic registers: 4
[ 0.068469] ... value mask: 0000ffffffffffff
[ 0.068523] ... max period: 00007fffffffffff
[ 0.068578] ... fixed-purpose events: 3
[ 0.068631] ... event mask: 000000070000000f
[ 0.069100] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.069246] x86: Booting SMP configuration:
[ 0.069300] .... node #0, CPUs: #1 #2 #3
[ 0.076738] x86: Booted up 1 node, 4 CPUs
[ 0.076843] smpboot: Total of 4 processors activated (26400.52 BogoMIPS)
[ 0.079275] devtmpfs: initialized
[ 0.079381] x86/mm: Memory block size: 128MB
[ 0.081409] PM: Registering ACPI NVS region [mem 0xdda2c000-0xddb4bfff] (1179648 bytes)
[ 0.081498] PM: Registering ACPI NVS region [mem 0xde82d000-0xde86ffff] (274432 bytes)
[ 0.081607] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.081680] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.081765] pinctrl core: initialized pinctrl subsystem
[ 0.081900] NET: Registered protocol family 16
[ 0.096723] cpuidle: using governor ladder
[ 0.112730] cpuidle: using governor menu
[ 0.112819] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.115066] ACPI: bus type PCI registered
[ 0.115120] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.115224] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.115293] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.115353] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.115473] PCI: Using configuration type 1 for base access
[ 0.115555] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.132889] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.133124] ACPI: Added _OSI(Module Device)
[ 0.133178] ACPI: Added _OSI(Processor Device)
[ 0.133232] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.133286] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.133486] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.136682] ACPI: Dynamic OEM Table Load:
[ 0.136824] ACPI: SSDT 0xFFFF97E5561B2000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.137258] ACPI: Dynamic OEM Table Load:
[ 0.137395] ACPI: SSDT 0xFFFF97E554DDB400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.137745] ACPI: Dynamic OEM Table Load:
[ 0.137881] ACPI: SSDT 0xFFFF97E554C49C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.138666] ACPI: Interpreter enabled
[ 0.138735] ACPI: (supports S0 S3 S4 S5)
[ 0.138789] ACPI: Using IOAPIC for interrupt routing
[ 0.138862] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.143116] ACPI: Power Resource [FN00] (off)
[ 0.143235] ACPI: Power Resource [FN01] (off)
[ 0.143352] ACPI: Power Resource [FN02] (off)
[ 0.143468] ACPI: Power Resource [FN03] (off)
[ 0.143584] ACPI: Power Resource [FN04] (off)
[ 0.144091] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.144150] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.144306] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.144452] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.144509] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.144908] PCI host bridge to bus 0000:00
[ 0.144963] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.145020] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.145077] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.145142] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.145208] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.145273] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.145339] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.145404] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.145470] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.145535] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.145601] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.145661] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.145736] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.145761] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.145796] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.145905] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.145924] pci 0000:00:16.0: reg 0x10: [mem 0xf7109000-0xf710900f 64bit]
[ 0.145993] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.146064] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.146079] pci 0000:00:1a.0: reg 0x10: [mem 0xf7107000-0xf71073ff]
[ 0.146156] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.146206] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.146293] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.146308] pci 0000:00:1b.0: reg 0x10: [mem 0xf7100000-0xf7103fff 64bit]
[ 0.146372] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146415] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146506] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.146627] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146674] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146763] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.146832] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.146874] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.146962] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.146977] pci 0000:00:1d.0: reg 0x10: [mem 0xf7106000-0xf71063ff]
[ 0.147056] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.147104] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.147192] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.147344] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[ 0.147355] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.147362] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.147368] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.147374] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.147380] pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
[ 0.147386] pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
[ 0.147468] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.147481] pci 0000:00:1f.3: reg 0x10: [mem 0xf7105000-0xf71050ff 64bit]
[ 0.147499] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.147574] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[ 0.147585] pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
[ 0.147591] pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
[ 0.147597] pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
[ 0.147604] pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
[ 0.147610] pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
[ 0.147616] pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
[ 0.147727] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[ 0.147735] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.147742] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.147749] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.147754] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.147759] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.147822] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.147830] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.159072] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.159134] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.159137] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.159142] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.159217] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.159345] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.159367] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.159399] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.159419] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.159531] pci 0000:03:00.0: supports D1 D2
[ 0.159532] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159580] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.171078] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.171141] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.171150] pci 0000:00:1c.5: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.171493] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.172029] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.172564] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
[ 0.173099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.173633] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.174257] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[ 0.174791] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.175328] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.176011] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.176224] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.176281] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.176346] vgaarb: loaded
[ 0.176398] vgaarb: bridge control possible 0000:01:00.0
[ 0.176503] PCI: Using ACPI for IRQ routing
[ 0.177946] PCI: pci_cache_line_size set to 64 bytes
[ 0.177980] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.177981] e820: reserve RAM buffer [mem 0xdd70a000-0xdfffffff]
[ 0.177982] e820: reserve RAM buffer [mem 0xde82d000-0xdfffffff]
[ 0.177983] e820: reserve RAM buffer [mem 0xdeca2000-0xdfffffff]
[ 0.177984] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.177984] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.178096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.178516] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.180587] clocksource: Switched to clocksource hpet
[ 0.185081] VFS: Disk quotas dquot_6.6.0
[ 0.185156] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.185278] pnp: PnP ACPI init
[ 0.185422] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.185481] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.185545] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.185610] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.185666] system 00:01: [io 0xffff] has been reserved
[ 0.185721] system 00:01: [io 0xffff] has been reserved
[ 0.185776] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.185832] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.185888] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.185943] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.186000] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186022] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.186060] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.186117] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.186183] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.186240] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186281] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.186338] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186513] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.186570] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.186627] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.186683] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.186740] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.186796] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.186853] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.186910] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.186966] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.187023] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.187080] system 00:06: [mem 0xf2200000-0xf2200fff] has been reserved
[ 0.187137] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187229] pnp: PnP ACPI: found 7 devices
[ 0.193078] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.193171] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.193226] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.193283] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.193341] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.193408] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.193478] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.193534] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.193594] pci 0000:00:1c.5: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.193665] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.193666] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.193667] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.193668] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.193669] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.193670] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.193671] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.193672] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.193673] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.193674] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.193675] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.193676] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.193677] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.193678] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.193679] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.193755] NET: Registered protocol family 2
[ 0.193935] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.194090] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.194251] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.194322] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.194395] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.194498] NET: Registered protocol family 1
[ 0.240728] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.240802] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.240840] Unpacking initramfs...
[ 0.479304] Freeing initrd memory: 18820K
[ 0.479385] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.479442] software IO TLB [mem 0xd970a000-0xdd70a000] (64MB) mapped at [ffff97e41970a000-ffff97e41d709fff]
[ 0.479780] audit: initializing netlink subsys (disabled)
[ 0.479849] audit: type=2000 audit(1523599692.476:1): initialized
[ 0.480201] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.480284] zbud: loaded
[ 0.480929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.481016] io scheduler noop registered
[ 0.481070] io scheduler deadline registered
[ 0.481131] io scheduler cfq registered (default)
[ 0.481600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.481658] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.481726] intel_idle: MWAIT substates: 0x1120
[ 0.481727] intel_idle: v0.4.1 model 0x3A
[ 0.481825] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.481916] GHES: HEST is not enabled!
[ 0.482008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.482369] Linux agpgart interface v0.103
[ 0.482476] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.482532] AMD IOMMUv2 functionality not available on this system
[ 0.482818] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.485254] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.485311] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.485452] mousedev: PS/2 mouse device common for all mice
[ 0.485538] rtc_cmos 00:02: RTC can wake from S4
[ 0.485701] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.485778] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.485850] intel_pstate: Intel P-state driver initializing
[ 0.486136] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.487007] NET: Registered protocol family 10
[ 0.487341] mip6: Mobile IPv6
[ 0.487399] NET: Registered protocol family 17
[ 0.487459] mpls_gso: MPLS GSO support
[ 0.487755] microcode: sig=0x306a9, pf=0x2, revision=0x1c
[ 0.487910] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.488211] registered taskstats version 1
[ 0.490539] zswap: loaded using pool lzo/zbud
[ 0.490746] ima: No TPM chip found, activating TPM-bypass!
[ 0.491102] rtc_cmos 00:02: setting system clock to 2018-04-13 06:08:13 UTC (1523599693)
[ 0.491257] PM: Hibernation image not present or could not be loaded.
[ 0.492892] Freeing unused kernel memory: 1416K
[ 0.492952] Write protecting the kernel read-only data: 12288k
[ 0.493641] Freeing unused kernel memory: 1940K
[ 0.497610] Freeing unused kernel memory: 1228K
[ 0.505662] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.525472] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.525633] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.525706] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.526645] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.526763] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.528187] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.528328] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.528857] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.528997] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.529132] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.564507] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.564573] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.565067] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.565140] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.567667] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.567739] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.568606] ACPI: bus type USB registered
[ 0.568712] usbcore: registered new interface driver usbfs
[ 0.568756] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.568772] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffadde80c85000, 08:60:6e:7e:4e:46, XID 08000800 IRQ 25
[ 0.568775] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.569011] usbcore: registered new interface driver hub
[ 0.569106] usbcore: registered new device driver usb
[ 0.569832] SCSI subsystem initialized
[ 0.570042] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.570373] ehci-pci: EHCI PCI platform driver
[ 0.570575] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.570638] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.570717] ehci-pci 0000:00:1a.0: debug port 2
[ 0.571825] libata version 3.00 loaded.
[ 0.574687] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.575110] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7107000
[ 0.588599] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.588746] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.588812] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.588885] usb usb1: Product: EHCI Host Controller
[ 0.588948] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[ 0.589011] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.589257] hub 1-0:1.0: USB hub found
[ 0.589327] hub 1-0:1.0: 2 ports detected
[ 0.589754] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.589824] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.589909] ehci-pci 0000:00:1d.0: debug port 2
[ 0.593452] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 0.593883] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.593899] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7106000
[ 0.608614] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.608725] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.608785] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.608852] usb usb2: Product: EHCI Host Controller
[ 0.608908] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[ 0.608965] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.609207] hub 2-0:1.0: USB hub found
[ 0.609275] hub 2-0:1.0: 2 ports detected
[ 0.609527] ata_piix 0000:00:1f.2: version 2.13
[ 0.609665] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.768620] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 0.769234] scsi host0: ata_piix
[ 0.769583] scsi host1: ata_piix
[ 0.769743] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[ 0.769811] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[ 0.770055] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.916609] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.928629] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 0.929239] scsi host2: ata_piix
[ 0.929436] scsi host3: ata_piix
[ 0.929572] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[ 0.929639] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[ 0.940002] ata2.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 0.940064] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.940592] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.945063] ata2.00: configured for UDMA/133
[ 0.945332] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.065023] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.065088] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.065560] hub 1-1:1.0: USB hub found
[ 1.065713] hub 1-1:1.0: 4 ports detected
[ 1.088964] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.089033] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.089399] hub 2-1:1.0: USB hub found
[ 1.090248] hub 2-1:1.0: 6 ports detected
[ 1.101830] ata4.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[ 1.123044] ata4.00: configured for UDMA/100
[ 1.127682] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB00 PQ: 0 ANSI: 5
[ 1.141972] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.142134] sd 1:0:0:0: [sda] Write Protect is off
[ 1.142202] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.142261] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.156259] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.156332] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.156541] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.188067] sda: sda1 sda2 sda3
[ 1.188948] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.356615] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.380602] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[ 1.467354] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6364
[ 1.467420] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.467491] usb 1-1.3: Product: Mass Storage Device
[ 1.467550] usb 1-1.3: Manufacturer: Generic
[ 1.467609] usb 1-1.3: SerialNumber: 058F63646476
[ 1.470273] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.470308] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 1.470793] scsi host4: usb-storage 1-1.3:1.0
[ 1.470960] usbcore: registered new interface driver usb-storage
[ 1.472322] usbcore: registered new interface driver usbhid
[ 1.472328] usbcore: registered new interface driver uas
[ 1.472451] usbhid: USB HID core driver
[ 1.473616] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.3/input1
[ 1.501126] random: fast init done
[ 1.504609] tsc: Refined TSC clocksource calibration: 3300.023 MHz
[ 1.504677] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f91626a655, max_idle_ns: 440795305688 ns
[ 1.510378] usb 2-1.1: New USB device found, idVendor=1e54, idProduct=2030
[ 1.510441] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.510511] usb 2-1.1: Product: USB Keyboard
[ 1.510568] usb 2-1.1: Manufacturer: TypeMatrix.com
[ 1.520787] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1E54:2030.0002/input/input3
[ 1.580777] hid-generic 0003:1E54:2030.0002: input,hidraw1: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-1.1/input0
[ 1.597855] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1E54:2030.0003/input/input4
[ 1.656804] hid-generic 0003:1E54:2030.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-1.1/input1
[ 1.736602] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.750615] PM: Starting manual resume from disk
[ 1.750679] PM: Hibernation image partition 8:2 present
[ 1.750680] PM: Looking for hibernation image.
[ 1.750865] PM: Image not found (code -22)
[ 1.750866] PM: Hibernation image not present or could not be loaded.
[ 1.851695] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52f
[ 1.851762] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.851839] usb 2-1.4: Product: USB Receiver
[ 1.851903] usb 2-1.4: Manufacturer: Logitech
[ 1.854307] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C52F.0004/input/input5
[ 1.854550] hid-generic 0003:046D:C52F.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0
[ 1.857007] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52F.0005/input/input6
[ 1.916883] hid-generic 0003:046D:C52F.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1
[ 2.026046] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.497661] scsi 4:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 2.498494] scsi 4:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 2.501618] scsi 4:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 2.502493] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 2.509455] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.510214] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 2.510814] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 2.511561] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 2.528800] clocksource: Switched to clocksource tsc
[ 3.989404] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.063565] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.063854] systemd[1]: Detected architecture x86-64.
[ 4.083861] systemd[1]: Set hostname to <agamemnon>.
[ 4.579611] random: crng init done
[ 5.479114] systemd[1]: Listening on Journal Audit Socket.
[ 5.479620] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.480036] systemd[1]: Listening on udev Kernel Socket.
[ 5.480454] systemd[1]: Listening on udev Control Socket.
[ 5.480891] systemd[1]: Listening on Journal Socket.
[ 5.481485] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.482063] systemd[1]: Created slice System Slice.
[ 6.001905] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.158101] lp: driver loaded but no devices found
[ 6.210109] systemd-journald[213]: Received request to flush runtime journal from PID 1
[ 6.327953] ppdev: user-space parallel port driver
[ 7.759106] wmi: Mapper loaded
[ 7.811464] EDAC MC: Ver: 3.0.0
[ 7.827427] EDAC ie31200: No ECC support
[ 7.858224] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 7.858306] ACPI: Power Button [PWRB]
[ 7.858441] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 7.858518] ACPI: Power Button [PWRF]
[ 7.917824] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 7.918354] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 7.918449] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 7.918540] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 7.918627] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 7.918714] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 7.933573] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[ 7.933752] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.933826] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.934000] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)
[ 7.934173] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.934244] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.934430] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)
[ 7.934618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.934690] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 7.934863] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)
[ 7.935037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.935108] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.156319] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.700740] [drm] Initialized
[ 8.732747] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 8.853550] asus_wmi: ASUS WMI generic driver loaded
[ 8.859440] asus_wmi: Initialization: 0x0
[ 8.859550] asus_wmi: BIOS WMI version: 0.9
[ 8.859677] asus_wmi: SFUN value: 0x0
[ 8.860211] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[ 8.860337] asus_wmi: Number of fans: 1
[ 8.885456] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 8.885531] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 8.885592] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 8.885652] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 9.041762] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[ 9.155809] nouveau 0000:01:00.0: bios: version 70.18.70.00.06
[ 9.156530] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 9.218194] iTCO_vendor_support: vendor-support=0
[ 9.218795] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.218904] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.219084] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.333691] kvm: disabled by bios
[ 9.623420] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 9.623514] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.623604] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 9.623692] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 9.623769] snd_hda_codec_via hdaudioC0D0: inputs:
[ 9.623845] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 9.623922] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 9.623999] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 9.630601] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.630761] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.630914] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.631066] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.631217] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 9.976111] intel_rapl: Found RAPL domain package
[ 9.976189] intel_rapl: Found RAPL domain core
[ 9.976269] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 10.325710] Adding 7812092k swap on /dev/sda2. Priority:-1 extents:1 across:7812092k FS
[ 10.456464] [TTM] Zone kernel: Available graphics memory: 4062718 kiB
[ 10.456524] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 10.456581] [TTM] Initializing pool allocator
[ 10.456639] [TTM] Initializing DMA pool allocator
[ 10.458881] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 10.458937] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 10.459003] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 10.459062] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 10.459127] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[ 10.459184] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[ 10.459240] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[ 10.459296] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[ 10.459353] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 10.459408] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 10.459463] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 10.500659] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.500718] [drm] Driver supports precise vblank timestamp query.
[ 10.551221] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 10.639798] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo ffff97e55206f800
[ 10.639927] fbcon: nouveaufb (fb0) is primary device
[ 10.782776] Console: switching to colour frame buffer device 160x64
[ 10.784799] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 10.804486] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 10.804638] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 10.804652] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 12.207329] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.477256] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 12.477400] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 12.477535] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 12.477669] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 16.790511] Process accounting resumed
[ 17.566284] audit: type=1305 audit(1523599710.569:2): audit_pid=419 old=0 auid=4294967295 ses=4294967295 res=1
[ 24.268416] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 24.339761] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[ 24.435232] r8169 0000:03:00.0 enp3s0: link down
[ 24.435234] r8169 0000:03:00.0 enp3s0: link down
[ 24.435305] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 25.987734] r8169 0000:03:00.0 enp3s0: link up
[ 25.988071] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 68.469301] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 68.469308] ata2.00: BMDMA stat 0x24
[ 68.469311] ata2.00: failed command: READ DMA EXT
[ 68.469320] ata2.00: cmd 25/00:00:70:13:de/00:01:71:00:00/e0 tag 0 dma 131072 in
res 51/40:00:e0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 68.469324] ata2.00: status: { DRDY ERR }
[ 68.469326] ata2.00: error: { UNC }
[ 68.574047] ata2.00: configured for UDMA/133
[ 68.574088] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 68.574093] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 68.574097] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 68.574102] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 70 00 01 00 00
[ 68.574105] blk_update_request: I/O error, dev sda, sector 1910379488
[ 68.574124] ata2: EH complete
[ 71.407749] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 71.407755] ata2.00: BMDMA stat 0x25
[ 71.407759] ata2.00: failed command: READ DMA EXT
[ 71.407768] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 71.407771] ata2.00: status: { DRDY ERR }
[ 71.407774] ata2.00: error: { UNC }
[ 71.536653] ata2.00: configured for UDMA/133
[ 71.536670] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 71.536674] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 71.536678] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 71.536682] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 71.536685] blk_update_request: I/O error, dev sda, sector 1910379504
[ 71.536703] ata2: EH complete
[ 74.518635] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 74.518641] ata2.00: BMDMA stat 0x25
[ 74.518645] ata2.00: failed command: READ DMA EXT
[ 74.518654] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 74.518657] ata2.00: status: { DRDY ERR }
[ 74.518660] ata2.00: error: { UNC }
[ 74.684577] ata2.00: configured for UDMA/133
[ 74.684595] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 74.684600] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 74.684604] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 74.684609] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 74.684612] blk_update_request: I/O error, dev sda, sector 1910379504
[ 74.684631] ata2: EH complete
[ 93.334720] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 93.334726] ata2.00: BMDMA stat 0x25
[ 93.334730] ata2.00: failed command: READ DMA EXT
[ 93.334738] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 93.334742] ata2.00: status: { DRDY ERR }
[ 93.334745] ata2.00: error: { UNC }
[ 93.440739] ata2.00: configured for UDMA/133
[ 93.440759] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 93.440764] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 93.440768] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 93.440773] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 93.440776] blk_update_request: I/O error, dev sda, sector 1910379504
[ 93.440794] ata2: EH complete
[ 96.314355] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 96.314361] ata2.00: BMDMA stat 0x25
[ 96.314365] ata2.00: failed command: READ DMA EXT
[ 96.314374] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 96.314377] ata2.00: status: { DRDY ERR }
[ 96.314380] ata2.00: error: { UNC }
[ 96.421067] ata2.00: configured for UDMA/133
[ 96.421088] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 96.421093] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 96.421096] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 96.421102] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 96.421105] blk_update_request: I/O error, dev sda, sector 1910379504
[ 96.421131] ata2: EH complete
[ 114.412795] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.412801] ata2.00: BMDMA stat 0x25
[ 114.412805] ata2.00: failed command: READ DMA EXT
[ 114.412813] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 114.412817] ata2.00: status: { DRDY ERR }
[ 114.412820] ata2.00: error: { UNC }
[ 114.519631] ata2.00: configured for UDMA/133
[ 114.519650] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 114.519655] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 114.519659] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 114.519664] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 114.519667] blk_update_request: I/O error, dev sda, sector 1910379504
[ 114.519690] ata2: EH complete
[ 117.376621] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 117.376626] ata2.00: BMDMA stat 0x25
[ 117.376629] ata2.00: failed command: READ DMA EXT
[ 117.376637] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 117.376640] ata2.00: status: { DRDY ERR }
[ 117.376642] ata2.00: error: { UNC }
[ 117.483263] ata2.00: configured for UDMA/133
[ 117.483282] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 117.483287] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 117.483292] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 117.483298] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 117.483302] blk_update_request: I/O error, dev sda, sector 1910379504
[ 117.483326] ata2: EH complete
[ 122.844252] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 122.844259] ata2.00: BMDMA stat 0x25
[ 122.844262] ata2.00: failed command: READ DMA EXT
[ 122.844271] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 122.844275] ata2.00: status: { DRDY ERR }
[ 122.844278] ata2.00: error: { UNC }
[ 122.952846] ata2.00: configured for UDMA/133
[ 122.952864] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 122.952869] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 122.952872] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 122.952877] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 122.952880] blk_update_request: I/O error, dev sda, sector 1910379504
[ 122.952900] ata2: EH complete
[ 125.908107] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 125.908113] ata2.00: BMDMA stat 0x25
[ 125.908117] ata2.00: failed command: READ DMA EXT
[ 125.908125] ata2.00: cmd 25/00:08:f0:13:de/00:00:71:00:00/e0 tag 0 dma 4096 in
res 51/40:00:f0:13:de/40:00:71:00:00/00 Emask 0x9 (media error)
[ 125.908129] ata2.00: status: { DRDY ERR }
[ 125.908132] ata2.00: error: { UNC }
[ 126.056949] ata2.00: configured for UDMA/133
[ 126.056967] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 126.056972] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[ 126.056976] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 126.056980] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 71 de 13 f0 00 00 08 00
[ 126.056984] blk_update_request: I/O error, dev sda, sector 1910379504
[ 126.057002] ata2: EH complete
[ 2040.000227] systemd[1]: apt-daily.timer: Adding 11h 34min 12.690200s random time.
[ 2040.622777] systemd[1]: apt-daily.timer: Adding 8min 26.187977s random time.
[ 2040.701814] systemd[1]: apt-daily.timer: Adding 11h 35min 29.902671s random time.
[ 2040.792803] systemd[1]: apt-daily.timer: Adding 9h 50min 51.844764s random time.
[ 2041.354485] systemd[1]: apt-daily.timer: Adding 9min 50.458651s random time.
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
