Debian-facile

manu0123456

Membre

Distrib. : Debian sid

Noyau : Linux 4.16.0-2-amd64

(G)UI : Gnome 3.28.2

Inscription : 30-05-2014

Re : [Résolu] Table GPT sur disque 4To

hdparm -I /dev/sda
 

/dev/sda:

ATA device, with non-removable media
  Model Number:       WDC WD40EZRX-00SPEB0                    
  Serial Number:      WD-WCC4E1673264
  Firmware Revision:  80.00A80
  Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
  Supported: 9 8 7 6 5
  Likely used: 9
Configuration:
  Logical   max current
  cylinders 16383 16383
  heads   16  16
  sectors/track 63  63
  --
  CHS current addressable sectors:    16514064
  LBA    user addressable sectors:   268435455
  LBA48  user addressable sectors:  7814037168
  Logical  Sector size:                   512 bytes
  Physical Sector size:                  4096 bytes
  device size with M = 1024*1024:     3815447 MBytes
  device size with M = 1000*1000:     4000787 MBytes (4000 GB)
  cache/buffer size  = unknown
  Nominal Media Rotation Rate: 5400
Capabilities:
  LBA, IORDY(can be disabled)
  Queue depth: 32
  Standby timer values: spec'd by Standard, with device specific minimum
  R/W multiple sector transfer: Max = 16  Current = 16
  DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
       Cycle time: min=120ns recommended=120ns
  PIO: pio0 pio1 pio2 pio3 pio4
       Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
  Enabled Supported:
     *  SMART feature set
        Security Mode feature set
     *  Power Management feature set
     *  Write cache
     *  Look-ahead
     *  Host Protected Area feature set
     *  WRITE_BUFFER command
     *  READ_BUFFER command
     *  NOP cmd
     *  DOWNLOAD_MICROCODE
        Power-Up In Standby feature set
     *  SET_FEATURES required to spinup after power up
        SET_MAX security extension
     *  48-bit Address feature set
     *  Device Configuration Overlay feature set
     *  Mandatory FLUSH_CACHE
     *  FLUSH_CACHE_EXT
     *  SMART error logging
     *  SMART self-test
     *  General Purpose Logging feature set
     *  64-bit World wide name
     *  WRITE_UNCORRECTABLE_EXT command
     *  {READ,WRITE}_DMA_EXT_GPL commands
     *  Segmented DOWNLOAD_MICROCODE
     *  Gen1 signaling speed (1.5Gb/s)
     *  Gen2 signaling speed (3.0Gb/s)
     *  Gen3 signaling speed (6.0Gb/s)
     *  Native Command Queueing (NCQ)
     *  Host-initiated interface power management
     *  Phy event counters
     *  NCQ priority information
     *  READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
        DMA Setup Auto-Activate optimization
        Device-initiated interface power management
     *  Software settings preservation
     *  SMART Command Transport (SCT) feature set
     *  SCT Write Same (AC2)
     *  SCT Features Control (AC4)
     *  SCT Data Tables (AC5)
        unknown 206[12] (vendor specific)
        unknown 206[13] (vendor specific)
        unknown 206[14] (vendor specific)
Security:
  Master password revision code = 65534
    supported
  not enabled
  not locked
    frozen
  not expired: security count
    supported: enhanced erase
  more than 508min for SECURITY ERASE UNIT. more than 508min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee25f76ff4e
  NAA   : 5
  IEEE OUI  : 0014ee
  Unique ID : 25f76ff4e
Checksum: correct

 

manu0123456

Membre

Distrib. : Debian sid

Noyau : Linux 4.16.0-2-amd64

(G)UI : Gnome 3.28.2

Inscription : 30-05-2014

Re : [Résolu] Table GPT sur disque 4To

J'ai transféré mon disque sue mon serveur.
Tout marche parfaitement.
Table GPT et partitionnement en 10 mn.

J'ai essayé de remettre le disque sur le 1er PC.
Dès que j'ai touché le partitionnement avec gnome-disques, retour à la situation d'origine.

Ramené sur le serveur, de nouveau tout OK.

Merci de votre aide

Dernière modification par manu0123456 (17-06-2018 21:29:09)