résolu. plantage de thunar

lagrenouille · 20-09-2018 09:03:49

salut
suis en stretch stable, j'ai ce problème depuis peu de temps avec youtube-dl qui me casse thunar

vu que lu version debian est pleine de bug, j'ai installé via github avec curl

youtube-dl fonctionne, les vidéos sont téléchargés..

le probléme est : dés que youtube-dl se lance en console, thunar plante..
j'ai beau chercher, je sèche, alors si vous avez une idée ...

je précise que quelque soit la façon d'installer, le problème est le même, wget, curl ou apt

Dernière modification par lagrenouille (20-09-2018 19:58:45)

Invité-X · 20-09-2018 09:58:59

Bonjour lagrenouille.

On peut avoir une copie d'ecran.
as tu installer ffmpeg ?

lagrenouille · 20-09-2018 11:24:05

ffmpeg, oui, il est installé depuis longtemps
une copie d'écran vide tout blanc de thunar ??, tu verras que du blanc cassé en fond

aucun paquet cassé ou mal purgé

momo# dpkg -l | grep -v ^ii

Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder

| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements

|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)

||/ Nom                                     Version                           Architecture Description

+++-=======================================-=================================-============-===============================================================================

Dernière modification par lagrenouille (20-09-2018 11:26:22)

chalu · 20-09-2018 12:30:11

Bonjour,
As tu des messages dans un terminal si tu lances thunar avec le terminal ?

lagrenouille · 20-09-2018 12:36:42

non aucun message
et si je lance youtube-dl dans une autre console, thunar est cassé et aucun message non plus

j'y pompe rien, mais ça doit être un truc tellement con qu'on y pense pas

Invité-X · 20-09-2018 12:41:26

attend si tu ne lance pas youtube-dl, thunar fonctionne?

lagrenouille · 20-09-2018 12:46:56

bien sur que thunar fonctionne, sinon il ne casserait pas

Invité-X · 20-09-2018 13:22:18

un lsof sur le pid de thunar pour voir quand il plante.

lagrenouille · 20-09-2018 14:19:38

https://debian-facile.org/paste-874769DBE9

je reboot

j'ai une erreur au démarrage de i3

you ave an error in yor i3 confg file !

show errors

/run/user/1000/i3nagbar-cmd.1259.nagbar_cmd

ERROR: CONFIG: Expected one of these tokens: <end>, '#', 'set', 'set_from_resource', 'bindsym', 'bindcode', 'bind', 'bar', 'font', 'mode', 'floating_minimum_size', 'floating_maximum_size', 'floating_modifier', 'default_orientation', 'workspace_layout', 'new_window', 'new_float', 'hide_edge_borders', 'for_window', 'assign', 'no_focus', 'focus_follows_mouse', 'mouse_warping', 'force_focus_wrapping', 'force_xinerama', 'force-xinerama', 'workspace_auto_back_and_forth', 'fake_outputs', 'fake-outputs', 'force_display_urgency_hint', 'focus_on_window_activation', 'show_marks', 'workspace', 'ipc_socket', 'ipc-socket', 'restart_state', 'popup_during_fullscreen', 'exec_always', 'exec', 'client.background', 'client.focused_inactive', 'client.focused', 'client.unfocused', 'client.urgent', 'client.placeholder'
ERROR: CONFIG: (in file /home/momo/.i3/config)
ERROR: CONFIG: Line 1: his file has been auto-generated by i3-config-wizard(1).
ERROR: CONFIG: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ERROR: CONFIG: Line 2: # It will not be overwritten, so edit it as you like.
ERROR: CONFIG: Line 3:
ERROR: FYI: You are using i3 version 4.13 (2016-11-08)

corrige et
je reboot

c'est bon pour cette erreur

ce qui ne change rien à mon erreur youtube

Dernière modification par lagrenouille (20-09-2018 14:47:41)

lagrenouille · 20-09-2018 14:52:43

sais pas si ça peut aider

 dmesg 

[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u4 (2018-08-21)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=fd47c11e-8797-4c41-bbf5-e598295ff308 ro quiet

[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd709fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000dd70a000-0x00000000dda1bfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000dda1c000-0x00000000dda2bfff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000dda2c000-0x00000000ddb4bfff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000ddb4c000-0x00000000de82bfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000de82c000-0x00000000de82cfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000de82d000-0x00000000de86ffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000de870000-0x00000000deca1fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000deca2000-0x00000000deff3fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.7 present.

[    0.000000] DMI: System manufacturer System Product Name/P8H61-M LX3 PLUS R2.0, BIOS 1102 06/04/2013

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-CFFFF write-protect

[    0.000000]   D0000-E7FFF uncachable

[    0.000000]   E8000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000 mask E00000000 write-back

[    0.000000]   1 base 200000000 mask FF0000000 write-back

[    0.000000]   2 base 210000000 mask FF8000000 write-back

[    0.000000]   3 base 218000000 mask FFC000000 write-back

[    0.000000]   4 base 21C000000 mask FFE000000 write-back

[    0.000000]   5 base 21E000000 mask FFF000000 write-back

[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable

[    0.000000]   7 disabled

[    0.000000]   8 disabled

[    0.000000]   9 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  

[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff9a29000fd740]

[    0.000000] Base memory trampoline at [ffff9a2900098000] 98000 size 24576

[    0.000000] BRK [0x1f9f3a000, 0x1f9f3afff] PGTABLE

[    0.000000] BRK [0x1f9f3b000, 0x1f9f3bfff] PGTABLE

[    0.000000] BRK [0x1f9f3c000, 0x1f9f3cfff] PGTABLE

[    0.000000] BRK [0x1f9f3d000, 0x1f9f3dfff] PGTABLE

[    0.000000] BRK [0x1f9f3e000, 0x1f9f3efff] PGTABLE

[    0.000000] BRK [0x1f9f3f000, 0x1f9f3ffff] PGTABLE

[    0.000000] BRK [0x1f9f40000, 0x1f9f40fff] PGTABLE

[    0.000000] BRK [0x1f9f41000, 0x1f9f41fff] PGTABLE

[    0.000000] BRK [0x1f9f42000, 0x1f9f42fff] PGTABLE

[    0.000000] BRK [0x1f9f43000, 0x1f9f43fff] PGTABLE

[    0.000000] BRK [0x1f9f44000, 0x1f9f44fff] PGTABLE

[    0.000000] BRK [0x1f9f45000, 0x1f9f45fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x35cc7000-0x36e5afff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)

[    0.000000] ACPI: XSDT 0x00000000DDA20078 00006C (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: FACP 0x00000000DDA29E30 00010C (v05 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: DSDT 0x00000000DDA20180 009CAF (v02 ALASKA A M I    00000022 INTL 20051117)

[    0.000000] ACPI: FACS 0x00000000DDB4A080 000040

[    0.000000] ACPI: APIC 0x00000000DDA29F40 000072 (v03 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: FPDT 0x00000000DDA29FB8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: MCFG 0x00000000DDA2A000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)

[    0.000000] ACPI: HPET 0x00000000DDA2A040 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)

[    0.000000] ACPI: SSDT 0x00000000DDA2A078 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)

[    0.000000] ACPI: BGRT 0x00000000DDA2B9B0 000038 (v00 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: SSDT 0x00000000DDA2A568 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)

[    0.000000] ACPI: SSDT 0x00000000DDA2AF18 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x21eff7000-0x21effbfff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dd709fff]

[    0.000000]   node   0: [mem 0x00000000de82c000-0x00000000de82cfff]

[    0.000000]   node   0: [mem 0x00000000de870000-0x00000000deca1fff]

[    0.000000]   node   0: [mem 0x00000000deff4000-0x00000000deffffff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]

[    0.000000] On node 0 totalpages: 2083558

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3997 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 14126 pages used for memmap

[    0.000000]   DMA32 zone: 904009 pages, LIFO batch:31

[    0.000000]   Normal zone: 18368 pages used for memmap

[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31

[    0.000000] ACPI: PM-Timer IO Port: 0x408

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xdd70a000-0xdda1bfff]

[    0.000000] PM: Registered nosave memory: [mem 0xdda1c000-0xdda2bfff]

[    0.000000] PM: Registered nosave memory: [mem 0xdda2c000-0xddb4bfff]

[    0.000000] PM: Registered nosave memory: [mem 0xddb4c000-0xde82bfff]

[    0.000000] PM: Registered nosave memory: [mem 0xde82d000-0xde86ffff]

[    0.000000] PM: Registered nosave memory: [mem 0xdeca2000-0xdeff3fff]

[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]

[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] percpu: Embedded 35 pages/cpu @ffff9a2b1ec00000 s105304 r8192 d29864 u524288

[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 

[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2050979

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=fd47c11e-8797-4c41-bbf5-e598295ff308 ro quiet

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 8102824K/8334232K available (6254K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 231408K reserved, 0K cma-reserved)

[    0.000000] Kernel/User page tables isolation: enabled

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Build-time adjustment of leaf fanout to 64.

[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000] NR_IRQS:33024 nr_irqs:456 16

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[    0.000000] hpet clockevent registered

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 3300.160 MHz processor

[    0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.32 BogoMIPS (lpj=13200640)

[    0.000023] pid_max: default: 32768 minimum: 301

[    0.000033] ACPI: Core revision 20160831

[    0.004332] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.004364] Security Framework initialized

[    0.004365] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.004369] AppArmor: AppArmor disabled by boot time parameter

[    0.004662] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.006147] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.006820] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.006826] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.007039] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.007039] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[    0.007042] mce: CPU supports 7 MCE banks

[    0.007048] CPU0: Thermal monitoring enabled (TM1)

[    0.007054] process: using mwait in idle threads

[    0.007056] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

[    0.007056] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

[    0.007058] Spectre V2 : Mitigation: Full generic retpoline

[    0.007058] Speculative Store Bypass: Vulnerable

[    0.007430] Freeing SMP alternatives memory: 24K

[    0.008980] ftrace: allocating 25285 entries in 99 pages

[    0.026183] smpboot: Max logical packages: 2

[    0.026574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.066260] TSC deadline timer enabled

[    0.066262] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)

[    0.066265] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

[    0.066284] ... version:                3

[    0.066284] ... bit width:              48

[    0.066284] ... generic registers:      4

[    0.066285] ... value mask:             0000ffffffffffff

[    0.066285] ... max period:             00007fffffffffff

[    0.066286] ... fixed-purpose events:   3

[    0.066286] ... event mask:             000000070000000f

[    0.066701] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.066782] x86: Booting SMP configuration:

[    0.066783] .... node  #0, CPUs:      #1 #2 #3

[    0.073759] x86: Booted up 1 node, 4 CPUs

[    0.073761] smpboot: Total of 4 processors activated (26401.28 BogoMIPS)

[    0.076120] devtmpfs: initialized

[    0.076172] x86/mm: Memory block size: 128MB

[    0.078147] PM: Registering ACPI NVS region [mem 0xdda2c000-0xddb4bfff] (1179648 bytes)

[    0.078169] PM: Registering ACPI NVS region [mem 0xde82d000-0xde86ffff] (274432 bytes)

[    0.078213] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.078219] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.078250] pinctrl core: initialized pinctrl subsystem

[    0.078332] NET: Registered protocol family 16

[    0.091878] cpuidle: using governor ladder

[    0.107884] cpuidle: using governor menu

[    0.107916] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[    0.107918] ACPI: bus type PCI registered

[    0.107919] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.108009] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)

[    0.108011] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820

[    0.108016] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.

[    0.108097] PCI: Using configuration type 1 for base access

[    0.108124] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[    0.128042] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.128223] ACPI: Added _OSI(Module Device)

[    0.128224] ACPI: Added _OSI(Processor Device)

[    0.128224] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.128225] ACPI: Added _OSI(Processor Aggregator Device)

[    0.128373] ACPI: Executed 1 blocks of module-level executable AML code

[    0.131432] ACPI: Dynamic OEM Table Load:

[    0.131437] ACPI: SSDT 0xFFFF9A2B14D7F000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)

[    0.131714] ACPI: Dynamic OEM Table Load:

[    0.131718] ACPI: SSDT 0xFFFF9A2B14C4A800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)

[    0.131945] ACPI: Dynamic OEM Table Load:

[    0.131948] ACPI: SSDT 0xFFFF9A2B14E07200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)

[    0.132589] ACPI: Interpreter enabled

[    0.132604] ACPI: (supports S0 S3 S4 S5)

[    0.132605] ACPI: Using IOAPIC for interrupt routing

[    0.132624] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.136838] ACPI: Power Resource [FN00] (off)

[    0.136902] ACPI: Power Resource [FN01] (off)

[    0.136965] ACPI: Power Resource [FN02] (off)

[    0.137027] ACPI: Power Resource [FN03] (off)

[    0.137093] ACPI: Power Resource [FN04] (off)

[    0.137550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])

[    0.137553] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.137644] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]

[    0.137725] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]

[    0.137726] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration

[    0.138062] PCI host bridge to bus 0000:00

[    0.138064] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.138065] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.138066] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.138067] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]

[    0.138068] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]

[    0.138069] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]

[    0.138070] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]

[    0.138071] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]

[    0.138072] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]

[    0.138073] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]

[    0.138074] pci_bus 0000:00: root bus resource [bus 00-3e]

[    0.138080] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000

[    0.138156] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400

[    0.138182] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.138217] pci 0000:00:01.0: System wakeup disabled by ACPI

[    0.138272] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000

[    0.138291] pci 0000:00:16.0: reg 0x10: [mem 0xf7109000-0xf710900f 64bit]

[    0.138361] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

[    0.138432] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320

[    0.138448] pci 0000:00:1a.0: reg 0x10: [mem 0xf7107000-0xf71073ff]

[    0.138525] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[    0.138573] pci 0000:00:1a.0: System wakeup disabled by ACPI

[    0.138605] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300

[    0.138620] pci 0000:00:1b.0: reg 0x10: [mem 0xf7100000-0xf7103fff 64bit]

[    0.138685] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.138727] pci 0000:00:1b.0: System wakeup disabled by ACPI

[    0.138765] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400

[    0.138890] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.138941] pci 0000:00:1c.0: System wakeup disabled by ACPI

[    0.138975] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400

[    0.139045] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[    0.139086] pci 0000:00:1c.5: System wakeup disabled by ACPI

[    0.139119] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320

[    0.139135] pci 0000:00:1d.0: reg 0x10: [mem 0xf7106000-0xf71063ff]

[    0.139212] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[    0.139259] pci 0000:00:1d.0: System wakeup disabled by ACPI

[    0.139290] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100

[    0.139443] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f

[    0.139454] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]

[    0.139460] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]

[    0.139467] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]

[    0.139473] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]

[    0.139479] pci 0000:00:1f.2: reg 0x20: [io  0xf090-0xf09f]

[    0.139485] pci 0000:00:1f.2: reg 0x24: [io  0xf080-0xf08f]

[    0.139568] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500

[    0.139581] pci 0000:00:1f.3: reg 0x10: [mem 0xf7105000-0xf71050ff 64bit]

[    0.139599] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]

[    0.139674] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185

[    0.139685] pci 0000:00:1f.5: reg 0x10: [io  0xf070-0xf077]

[    0.139691] pci 0000:00:1f.5: reg 0x14: [io  0xf060-0xf063]

[    0.139698] pci 0000:00:1f.5: reg 0x18: [io  0xf050-0xf057]

[    0.139704] pci 0000:00:1f.5: reg 0x1c: [io  0xf040-0xf043]

[    0.139710] pci 0000:00:1f.5: reg 0x20: [io  0xf030-0xf03f]

[    0.139716] pci 0000:00:1f.5: reg 0x24: [io  0xf020-0xf02f]

[    0.139827] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000

[    0.139835] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]

[    0.139842] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]

[    0.139849] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]

[    0.139854] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]

[    0.139859] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]

[    0.139923] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300

[    0.139931] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]

[    0.153782] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.153785] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    0.153789] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]

[    0.153793] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]

[    0.153885] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.153960] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000

[    0.153982] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]

[    0.154013] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]

[    0.154033] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]

[    0.154145] pci 0000:03:00.0: supports D1 D2

[    0.154146] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.154192] pci 0000:03:00.0: System wakeup disabled by ACPI

[    0.165788] pci 0000:00:1c.5: PCI bridge to [bus 03]

[    0.165792] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]

[    0.165802] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]

[    0.166176] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.166216] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)

[    0.166255] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)

[    0.166293] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)

[    0.166331] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.166370] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)

[    0.166408] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)

[    0.166446] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)

[    0.166635] ACPI: Enabled 4 GPEs in block 00 to 3F

[    0.166706] vgaarb: setting as boot device: PCI:0000:01:00.0

[    0.166707] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.166707] vgaarb: loaded

[    0.166708] vgaarb: bridge control possible 0000:01:00.0

[    0.166758] PCI: Using ACPI for IRQ routing

[    0.168147] PCI: pci_cache_line_size set to 64 bytes

[    0.168181] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]

[    0.168182] e820: reserve RAM buffer [mem 0xdd70a000-0xdfffffff]

[    0.168183] e820: reserve RAM buffer [mem 0xde82d000-0xdfffffff]

[    0.168184] e820: reserve RAM buffer [mem 0xdeca2000-0xdfffffff]

[    0.168185] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]

[    0.168185] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]

[    0.168292] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.168296] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[    0.170312] clocksource: Switched to clocksource hpet

[    0.174888] VFS: Disk quotas dquot_6.6.0

[    0.174908] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.174971] pnp: PnP ACPI init

[    0.175058] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved

[    0.175061] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.175124] system 00:01: [io  0x0680-0x069f] has been reserved

[    0.175126] system 00:01: [io  0x1000-0x100f] has been reserved

[    0.175127] system 00:01: [io  0xffff] has been reserved

[    0.175128] system 00:01: [io  0xffff] has been reserved

[    0.175129] system 00:01: [io  0x0400-0x0453] has been reserved

[    0.175130] system 00:01: [io  0x0458-0x047f] has been reserved

[    0.175132] system 00:01: [io  0x0500-0x057f] has been reserved

[    0.175133] system 00:01: [io  0x164e-0x164f] has been reserved

[    0.175135] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.175155] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.175193] system 00:03: [io  0x0454-0x0457] has been reserved

[    0.175195] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    0.175264] system 00:04: [io  0x0290-0x029f] has been reserved

[    0.175266] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.175307] system 00:05: [io  0x04d0-0x04d1] has been reserved

[    0.175309] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.175484] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    0.175485] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved

[    0.175486] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved

[    0.175488] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved

[    0.175489] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved

[    0.175490] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.175491] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved

[    0.175492] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved

[    0.175494] system 00:06: [mem 0xff000000-0xffffffff] has been reserved

[    0.175495] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved

[    0.175496] system 00:06: [mem 0xf2200000-0xf2200fff] has been reserved

[    0.175498] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.175589] pnp: PnP ACPI: found 7 devices

[    0.181395] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.181421] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.181422] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    0.181425] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]

[    0.181427] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]

[    0.181429] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.181446] pci 0000:00:1c.5: PCI bridge to [bus 03]

[    0.181447] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]

[    0.181453] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]

[    0.181459] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.181460] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.181461] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.181462] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]

[    0.181463] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]

[    0.181464] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]

[    0.181465] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]

[    0.181466] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]

[    0.181467] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]

[    0.181468] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]

[    0.181469] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]

[    0.181470] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]

[    0.181471] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]

[    0.181472] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]

[    0.181473] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]

[    0.181550] NET: Registered protocol family 2

[    0.181680] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    0.181767] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.181873] TCP: Hash tables configured (established 65536 bind 65536)

[    0.181889] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    0.181908] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    0.181956] NET: Registered protocol family 1

[    0.230450] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.230458] PCI: CLS mismatch (64 != 32), using 64 bytes

[    0.230494] Unpacking initramfs...

[    0.459291] Freeing initrd memory: 18000K

[    0.459296] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    0.459298] software IO TLB [mem 0xd970a000-0xdd70a000] (64MB) mapped at [ffff9a29d970a000-ffff9a29dd709fff]

[    0.459595] audit: initializing netlink subsys (disabled)

[    0.459610] audit: type=2000 audit(1537450930.460:1): initialized

[    0.459906] workingset: timestamp_bits=40 max_order=21 bucket_order=0

[    0.459935] zbud: loaded

[    0.460541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    0.460562] io scheduler noop registered

[    0.460563] io scheduler deadline registered

[    0.460571] io scheduler cfq registered (default)

[    0.460976] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    0.460979] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    0.460990] intel_idle: MWAIT substates: 0x1120

[    0.460990] intel_idle: v0.4.1 model 0x3A

[    0.461088] intel_idle: lapic_timer_reliable_states 0xffffffff

[    0.461180] GHES: HEST is not enabled!

[    0.461219] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.461531] Linux agpgart interface v0.103

[    0.461580] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

[    0.461581] AMD IOMMUv2 functionality not available on this system

[    0.461815] i8042: PNP: No PS/2 controller found. Probing ports directly.

[    0.464092] serio: i8042 KBD port at 0x60,0x64 irq 1

[    0.464095] serio: i8042 AUX port at 0x60,0x64 irq 12

[    0.464186] mousedev: PS/2 mouse device common for all mice

[    0.464217] rtc_cmos 00:02: RTC can wake from S4

[    0.464330] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

[    0.464352] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

[    0.464359] intel_pstate: Intel P-state driver initializing

[    0.464617] ledtrig-cpu: registered to indicate activity on CPUs

[    0.465434] NET: Registered protocol family 10

[    0.465752] mip6: Mobile IPv6

[    0.465754] NET: Registered protocol family 17

[    0.465756] mpls_gso: MPLS GSO support

[    0.465988] microcode: sig=0x306a9, pf=0x2, revision=0x17

[    0.466054] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    0.466220] registered taskstats version 1

[    0.466238] zswap: loaded using pool lzo/zbud

[    0.466358] ima: No TPM chip found, activating TPM-bypass!

[    0.466361] ima: Allocated hash algorithm: sha256

[    0.466682] rtc_cmos 00:02: setting system clock to 2018-09-20 13:42:11 UTC (1537450931)

[    0.466817] PM: Hibernation image not present or could not be loaded.

[    0.468252] Freeing unused kernel memory: 1420K

[    0.468253] Write protecting the kernel read-only data: 12288k

[    0.469081] Freeing unused kernel memory: 1920K

[    0.474977] Freeing unused kernel memory: 1224K

[    0.483706] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    0.501782] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.501880] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.501893] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.538643] thermal LNXTHERM:00: registered as thermal_zone0

[    0.538644] ACPI: Thermal Zone [TZ00] (28 C)

[    0.539499] thermal LNXTHERM:01: registered as thermal_zone1

[    0.539501] ACPI: Thermal Zone [TZ01] (30 C)

[    0.543198] ACPI: bus type USB registered

[    0.543230] usbcore: registered new interface driver usbfs

[    0.543243] usbcore: registered new interface driver hub

[    0.543273] usbcore: registered new device driver usb

[    0.543668] SCSI subsystem initialized

[    0.544117] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    0.544475] ehci-pci: EHCI PCI platform driver

[    0.544671] ehci-pci 0000:00:1a.0: EHCI Host Controller

[    0.544678] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[    0.544692] ehci-pci 0000:00:1a.0: debug port 2

[    0.546665] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    0.546673] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control

[    0.547580] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffbaddc0c95000, 08:60:6e:7e:4e:46, XID 08000800 IRQ 25

[    0.547582] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

[    0.548611] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported

[    0.549199] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7107000

[    0.549869] libata version 3.00 loaded.

[    0.562315] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[    0.562389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    0.562392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.562394] usb usb1: Product: EHCI Host Controller

[    0.562396] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd

[    0.562398] usb usb1: SerialNumber: 0000:00:1a.0

[    0.562584] hub 1-0:1.0: USB hub found

[    0.562596] hub 1-0:1.0: 2 ports detected

[    0.562942] ehci-pci 0000:00:1d.0: EHCI Host Controller

[    0.562950] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

[    0.562963] ehci-pci 0000:00:1d.0: debug port 2

[    0.566626] r8169 0000:03:00.0 enp3s0: renamed from eth0

[    0.566857] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported

[    0.566960] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7106000

[    0.582327] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[    0.582382] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[    0.582383] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.582385] usb usb2: Product: EHCI Host Controller

[    0.582386] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd

[    0.582387] usb usb2: SerialNumber: 0000:00:1d.0

[    0.582527] hub 2-0:1.0: USB hub found

[    0.582536] hub 2-0:1.0: 2 ports detected

[    0.582902] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[    0.583424] ata_piix 0000:00:1f.2: version 2.13

[    0.583543] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[    0.742332] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work

[    0.742808] scsi host0: ata_piix

[    0.742929] scsi host1: ata_piix

[    0.742997] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19

[    0.742999] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19

[    0.743122] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]

[    0.890335] usb 1-1: new high-speed USB device number 2 using ehci-pci

[    0.902321] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work

[    0.902806] scsi host2: ata_piix

[    0.902957] scsi host3: ata_piix

[    0.903024] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19

[    0.903026] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19

[    0.913523] usb 2-1: new high-speed USB device number 2 using ehci-pci

[    0.913809] ata2.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133

[    0.913811] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[    0.918755] ata2.00: configured for UDMA/133

[    0.919120] scsi 1:0:0:0: Direct-Access     ATA      ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5

[    1.038660] usb 1-1: New USB device found, idVendor=8087, idProduct=0024

[    1.038663] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.039072] hub 1-1:1.0: USB hub found

[    1.039224] hub 1-1:1.0: 4 ports detected

[    1.058689] usb 2-1: New USB device found, idVendor=8087, idProduct=0024

[    1.058692] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.059063] hub 2-1:1.0: USB hub found

[    1.059251] hub 2-1:1.0: 6 ports detected

[    1.075518] ata4.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100

[    1.096722] ata4.00: configured for UDMA/100

[    1.100915] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5

[    1.114057] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    1.114061] sd 1:0:0:0: [sda] 4096-byte physical blocks

[    1.114160] sd 1:0:0:0: [sda] Write Protect is off

[    1.114165] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.114199] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.130005] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[    1.130007] cdrom: Uniform CD-ROM driver Revision: 3.20

[    1.130161] sr 3:0:0:0: Attached scsi CD-ROM sr0

[    1.141762]  sda: sda1 sda2 < sda5 sda6 >

[    1.142320] sd 1:0:0:0: [sda] Attached SCSI disk

[    1.326298] usb 1-1.3: new high-speed USB device number 3 using ehci-pci

[    1.354311] usb 2-1.2: new low-speed USB device number 3 using ehci-pci

[    1.437430] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6364

[    1.437443] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    1.437445] usb 1-1.3: Product: Mass Storage Device

[    1.437446] usb 1-1.3: Manufacturer: Generic

[    1.437448] usb 1-1.3: SerialNumber: 058F63646476

[    1.439770] hidraw: raw HID events driver (C) Jiri Kosina

[    1.440178] usb-storage 1-1.3:1.0: USB Mass Storage device detected

[    1.440446] scsi host4: usb-storage 1-1.3:1.0

[    1.440565] usbcore: registered new interface driver usb-storage

[    1.441700] usbcore: registered new interface driver usbhid

[    1.441701] usbhid: USB HID core driver

[    1.441703] usbcore: registered new interface driver uas

[    1.442869] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.3/input1

[    1.453404] random: fast init done

[    1.466285] tsc: Refined TSC clocksource calibration: 3300.024 MHz

[    1.466292] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f9162f7d0a, max_idle_ns: 440795286380 ns

[    1.484497] usb 2-1.2: New USB device found, idVendor=1e54, idProduct=2030

[    1.484500] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    1.484502] usb 2-1.2: Product: USB Keyboard

[    1.484504] usb 2-1.2: Manufacturer: TypeMatrix.com

[    1.494810] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:1E54:2030.0002/input/input3

[    1.554490] hid-generic 0003:1E54:2030.0002: input,hidraw1: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-1.2/input0

[    1.571096] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1E54:2030.0003/input/input4

[    1.630455] hid-generic 0003:1E54:2030.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-1.2/input1

[    1.647640] PM: Starting manual resume from disk

[    1.647644] PM: Hibernation image partition 8:5 present

[    1.647645] PM: Looking for hibernation image.

[    1.647887] PM: Image not found (code -22)

[    1.647888] PM: Hibernation image not present or could not be loaded.

[    1.710287] usb 2-1.4: new full-speed USB device number 4 using ehci-pci

[    1.821590] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52f

[    1.821593] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    1.821595] usb 2-1.4: Product: USB Receiver

[    1.821597] usb 2-1.4: Manufacturer: Logitech

[    1.823062] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[    1.824006] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C52F.0004/input/input5

[    1.824129] hid-generic 0003:046D:C52F.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0

[    1.826923] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52F.0005/input/input6

[    1.886515] hid-generic 0003:046D:C52F.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1

[    2.459387] scsi 4:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0

[    2.460120] scsi 4:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0

[    2.460818] scsi 4:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0

[    2.461609] scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS

[    2.468660] sd 4:0:0:0: [sdb] Attached SCSI removable disk

[    2.469410] sd 4:0:0:1: [sdc] Attached SCSI removable disk

[    2.470160] sd 4:0:0:2: [sdd] Attached SCSI removable disk

[    2.470929] sd 4:0:0:3: [sde] Attached SCSI removable disk

[    2.490400] clocksource: Switched to clocksource tsc

[    2.562962] ip_tables: (C) 2000-2006 Netfilter Core Team

[    2.599170] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)

[    2.599370] systemd[1]: Detected architecture x86-64.

[    2.604349] systemd[1]: Set hostname to <agamemnon>.

[    3.266174] systemd[1]: Listening on Journal Socket.

[    3.266352] systemd[1]: Listening on Journal Audit Socket.

[    3.266372] systemd[1]: Reached target Remote File Systems.

[    3.266410] systemd[1]: Listening on Syslog Socket.

[    3.266471] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    3.266526] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[    3.266567] systemd[1]: Listening on fsck to fsckd communication Socket.

[    3.511182] lp: driver loaded but no devices found

[    3.561233] ppdev: user-space parallel port driver

[    3.685775] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

[    3.849622] systemd-journald[206]: Received request to flush runtime journal from PID 1

[    4.408992] random: crng init done

[    4.408996] random: 7 urandom warning(s) missed due to ratelimiting

[    4.643707] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7

[    4.643712] ACPI: Power Button [PWRB]

[    4.643778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8

[    4.643780] ACPI: Power Button [PWRF]

[    4.660223] wmi: Mapper loaded

[    4.706782] EDAC MC: Ver: 3.0.0

[    4.717360] EDAC ie31200: No ECC support

[    4.757648] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    4.943112] [drm] Initialized

[    5.022993] sd 1:0:0:0: Attached scsi generic sg0 type 0

[    5.023033] sr 3:0:0:0: Attached scsi generic sg1 type 5

[    5.023068] sd 4:0:0:0: Attached scsi generic sg2 type 0

[    5.023101] sd 4:0:0:1: Attached scsi generic sg3 type 0

[    5.023136] sd 4:0:0:2: Attached scsi generic sg4 type 0

[    5.023155] snd_hda_intel 0000:01:00.1: Disabling MSI

[    5.023160] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client

[    5.023169] sd 4:0:0:3: Attached scsi generic sg5 type 0

[    5.025861] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

[    5.025862] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

[    5.025863] RAPL PMU: hw unit of domain package 2^-16 Joules

[    5.025863] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

[    5.091153] input: PC Speaker as /devices/platform/pcspkr/input/input9

[    5.144103] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)

[    5.144109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    5.144111] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)

[    5.144116] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)

[    5.144120] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    5.144120] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)

[    5.144124] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)

[    5.144128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    5.144128] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)

[    5.144132] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)

[    5.144136] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    5.144136] lpc_ich: Resource conflict(s) found affecting gpio_ich

[    5.161172] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line

[    5.161175] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[    5.161177] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)

[    5.161178] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0

[    5.161179] snd_hda_codec_via hdaudioC0D0:    inputs:

[    5.161181] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a

[    5.161183] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e

[    5.161184] snd_hda_codec_via hdaudioC0D0:      Line=0x1b

[    5.167650] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10

[    5.167721] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11

[    5.167783] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12

[    5.167846] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13

[    5.167922] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14

[    5.406678] asus_wmi: ASUS WMI generic driver loaded

[    5.407625] asus_wmi: Initialization: 0x0

[    5.407661] asus_wmi: BIOS WMI version: 0.9

[    5.407717] asus_wmi: SFUN value: 0x0

[    5.408051] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15

[    5.408161] asus_wmi: Number of fans: 1

[    5.481393] iTCO_vendor_support: vendor-support=0

[    5.482000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[    5.482043] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)

[    5.482184] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    5.564725] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)

[    5.597080] kvm: disabled by bios

[    5.679078] nouveau 0000:01:00.0: bios: version 70.18.70.00.06

[    5.679584] nouveau 0000:01:00.0: fb: 1024 MiB DDR3

[    5.735113] kvm: disabled by bios

[    5.894418] intel_rapl: Found RAPL domain package

[    5.894420] intel_rapl: Found RAPL domain core

[    5.894424] intel_rapl: RAPL package 0 domain package locked by BIOS

[    6.374453] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16

[    6.374510] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17

[    6.374559] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18

[    6.374607] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19

[    6.378874] Adding 8333308k swap on /dev/sda5.  Priority:-1 extents:1 across:8333308k FS

[    6.954083] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)

[    6.978021] [TTM] Zone  kernel: Available graphics memory: 4062706 kiB

[    6.978022] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB

[    6.978022] [TTM] Initializing pool allocator

[    6.978026] [TTM] Initializing DMA pool allocator

[    6.978052] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB

[    6.978054] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB

[    6.978058] nouveau 0000:01:00.0: DRM: TMDS table version 2.0

[    6.978060] nouveau 0000:01:00.0: DRM: DCB version 4.0

[    6.978062] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030

[    6.978064] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000

[    6.978066] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010

[    6.978067] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000

[    6.978069] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030

[    6.978070] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161

[    6.978072] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200

[    7.019254] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    7.019255] [drm] Driver supports precise vblank timestamp query.

[    7.069877] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies

[    7.159230] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo ffff9a2b1407b400

[    7.159312] fbcon: nouveaufb (fb0) is primary device

[    7.303140] Console: switching to colour frame buffer device 240x67

[    7.306289] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device

[    7.322036] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0

[    7.561042] audit: type=1305 audit(1537450938.587:2): audit_pid=407 old=0 auid=4294967295 ses=4294967295 res=1

[    8.150787] Process accounting resumed

[   12.884804] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready

[   12.924661] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw

[   13.060003] r8169 0000:03:00.0 enp3s0: link down

[   13.060006] r8169 0000:03:00.0 enp3s0: link down

[   13.060057] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready

[   14.654339] r8169 0000:03:00.0 enp3s0: link up

[   14.654348] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready

Voir le tuto : Le code, ça pique moins les yeux en couleur

Invité-X · 20-09-2018 14:53:44

si tu renomme les fichiers de config thunar

lagrenouille · 20-09-2018 19:58:23

c'est bon, je pense que d'avoir renommer les repertoires thunar dans .config, à fait le boulot

puis rebooter ensuite

Dernière modification par lagrenouille (20-09-2018 19:59:27)

Debian-facile

#1 20-09-2018 09:03:49

résolu. plantage de thunar

#2 20-09-2018 09:58:59

Re : résolu. plantage de thunar

#3 20-09-2018 11:24:05

Re : résolu. plantage de thunar

#4 20-09-2018 12:30:11

Re : résolu. plantage de thunar

#5 20-09-2018 12:36:42

Re : résolu. plantage de thunar

#6 20-09-2018 12:41:26

Re : résolu. plantage de thunar

#7 20-09-2018 12:46:56

Re : résolu. plantage de thunar

#8 20-09-2018 13:22:18

Re : résolu. plantage de thunar

#9 20-09-2018 14:19:38

Re : résolu. plantage de thunar

#10 20-09-2018 14:52:43

Re : résolu. plantage de thunar

#11 20-09-2018 14:53:44

Re : résolu. plantage de thunar

#12 20-09-2018 19:58:23

Re : résolu. plantage de thunar

Pied de page des forums