Vous n'êtes pas identifié(e).
Pages : 1
Commit Log for Fri Sep 7 11:53:41 2018
Les paquets suivants ont été mis à jour :
curl (7.52.1-5+deb9u6) to 7.52.1-5+deb9u7
libcurl3 (7.52.1-5+deb9u6) to 7.52.1-5+deb9u7
libcurl3-gnutls (7.52.1-5+deb9u6) to 7.52.1-5+deb9u7
libcurl4-openssl-dev (7.52.1-5+deb9u6) to 7.52.1-5+deb9u7
liblcms2-2 (2.8-4) to 2.8-4+deb9u1
liblcms2-2:i386 (2.8-4) to 2.8-4+deb9u1
liblcms2-utils (2.8-4) to 2.8-4+deb9u1
libservlet3.1-java (8.5.14-1+deb9u2) to 8.5.14-1+deb9u3
Je suis en deplacement pour toute la semaine donc je serais de retour le week end prochain...
Pour l'instant je vous poste ceci:
(j'ai beaucoup cherche depuis hier sur ce probleme, en vain.....)
tyzef@debian:~$ lpstat -p
printer Deskjet-1000-J110-series is idle. enabled since ven. 14 sept. 2018 15:11:16 +05
tyzef@debian:~$ hp-check
Saving output in log file: /home/tyzef/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
/
** (xsane:5856): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
warning: 2-9.5 version is not supported. Using 2-8.6 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u4 (2018-08-21) GNU/Linux
Host: debian
Proc: 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u4 (2018-08-21) GNU/Linux
Distribution: 2 9.5
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 2 distro 9.5 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.11
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 09/14/18 15:12:12
version = 3.16.11
[last_used]
device_uri = hp:/usb/Deskjet_1000_J110_series?serial=CN35O19H0P05YD
printer_name = Deskjet_1000_J110
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1530439208
notify_upgrade = true
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.11 OK -
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.11 OK 'hpaio found in /etc/sane.d/dll.conf'
-------------------------
| External Dependencies |
-------------------------
** (xsane:5979): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
** (xsane:5980): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
dbus DBus - Message bus system REQUIRED - 1.10.26 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.20 OK -
network network -wget OPTIONAL - 1.18 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.1 OK 'CUPS Scheduler is running'
------------------------
| General Dependencies |
------------------------
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.11.4 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.1 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.5.3 OK -
sane SANE - Scanning library REQUIRED - - OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.4 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.5.3 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.1 OK -
python3-xml Python XML libraries REQUIRED - 2.2.0 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.24' OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.4 OK -
--------------
| COMPILEDEP |
--------------
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 6.3.0 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.16.11 OK -
hpmudext IO-Extension REQUIRED - 3.16.11 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
---------------------------------------------------- ---------------------------
hp:/usb/Deskjet_1000_J110_series?serial=CN35O19H0P05 HP Deskjet 1000 J110 series
YD
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Deskjet-1000-J110-series
------------------------
Type: Printer
Device URI: hp:/usb/Deskjet_1000_J110_series?serial=CN35O19H0P05YD
PPD: /etc/cups/ppd/Deskjet-1000-J110-series.ppd
warning: Failed to read /etc/cups/ppd/Deskjet-1000-J110-series.ppd ppd file
PPD Description:
Printer status: printer Deskjet-1000-J110-series is idle. enabled since ven. 14 sept. 2018 15:11:16 +05
Communication status: Good
--------------
| PERMISSION |
--------------
USB Deskjet-1000-J110-series Required - - OK Node:'/dev/bus/usb/002/016' Perm:' root lp rw- rw- rw- rw- rw- r--'
No errors or warnings.
Done.
tyzef@debian:~$ hp-levels
HP Linux Imaging and Printing System (ver. 3.16.11)
Supply Levels Utility ver. 2.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using device : hp:/usb/Deskjet_1000_J110_series?serial=CN35O19H0P05YD
HP Linux Imaging and Printing System (ver. 3.16.11)
System Tray Status Service ver. 2.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Unable to find hp-upgrade --notify on PATH.
Done.
Il m''arrive aussi d'avoir l'erreur suivante:
Device communication error (5012)
Jai tout desinstalle, reinstalle, que dale...
Voila tout ce queje peux vous dire pour l'instant...
Cette imprimante a toujours bien fonctionne.
Bien a vous ! Et merci pour votre attention !
Hors ligne
Hors ligne
Pages : 1