logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 15-04-2019 16:05:28

autrekrikri
Membre
Distrib. : Debian 9
Noyau : Linux 4.9.0-8-amd64
(G)UI : wmii
Inscription : 26-01-2016

[résolu]raspberry pi et écran tactile

Bonjour à tous,
Je viens d'acheter un écran tactile pour aller avec mon raspberry pi et openelec.
Jusque là tout va bien, l'image s'affiche lors du démarrage, est belle et reste bien affichée.
Par contre, point de tactile ...
J'ai d'abord cru à un défaut de l'écran, mais non, sous ma debian, tout va bien (si j'ose dire).
Du coup, je pense à un problème de driver, mais je ne sais pas quoi faire ...
Un ptit coup de main svp ?

L'écran est une "chinoiserie" de chez aliexpress https://fr.aliexpress.com/item/Raspberr … 6c37C0sx6K

Oh, et c'est pareil sous raspbian ...

Dernière modification par autrekrikri (16-04-2019 12:46:41)

Hors ligne

#2 15-04-2019 18:26:49

anonyme
Invité

Re : [résolu]raspberry pi et écran tactile

Bonsoir
c'est un problème de l'écran , le 7 pouces officiel fonctionne très bien en tactile avec raspbian
sûrement que ce modèle n'est pas bien reconnu , peut être un souci de driver , tu n'a rien trouvé sur le net au sujet de raspbian et de cet écran ?
ps: tout est chinoiserie , et heureusement qu ils sont la  tongue

#3 15-04-2019 18:56:02

autrekrikri
Membre
Distrib. : Debian 9
Noyau : Linux 4.9.0-8-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]raspberry pi et écran tactile

anonyme a écrit :

Bonsoir
c'est un problème de l'écran , le 7 pouces officiel fonctionne très bien en tactile avec raspbian
sûrement que ce modèle n'est pas bien reconnu , peut être un souci de driver , tu n'a rien trouvé sur le net au sujet de raspbian et de cet écran ?
ps: tout est chinoiserie , et heureusement qu ils sont la  tongue


Bonjour et merci de ma répondre,
Je n'ai pas trouvé beaucoup d'informations, si ce n'est ce qu'il y a sur le site de vente ...
J'ai ajouté au bout de mon config.txt :
Max_usb_current = 1
Hdmi_group = 2
Hdmi_mode = 1
Hdmi_mode = 87
Hdmi_cvt 1024 600 60 6 0 0 0
Comme indiqué sur le site, mais cela me donne l'impression qu'il ne s'agit de d'un morceau pour l'affichage non ?
Et en effet, quasi tout est "chinoiserie" big_smile

[edit] : en effet, cela a un impact sur l'affichage mais rien sur la partie tactile.
En effet, j'ai des drivers sur un cd, mais je pensai qu'ils ne servaient que pour windows car d'habitude, tout ou presque est "reconnu" out of box sur nunux.
Du coup, il faudra que je test avec raspbian ...

Dernière modification par autrekrikri (15-04-2019 20:11:56)

Hors ligne

#4 16-04-2019 08:07:03

anonyme
Invité

Re : [résolu]raspberry pi et écran tactile

Bonjour
je te donne quelques infos sur mon PI3


xrandr
 



xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 480, current 800 x 480, maximum 800 x 480
default connected 800x480+0+0 0mm x 0mm
   800x480        0.00*
 


pour la partie tactile sur le log /var/log/Xorg.0.log

avec un explorateur de fichier ou la commande :


cat /var/log/Xorg.0.log
 




[    10.942]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    10.942] X Protocol Version 11, Revision 0
[    10.942] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[    10.942] Current Operating System: Linux lcdpi1 4.19.25-v7+ #1205 SMP Mon Feb 25 18:19:20 GMT 2019 armv7l
[    10.942] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=dd96ecbf-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    10.943] Build Date: 18 October 2017  04:55:30PM
[    10.943] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[    10.943] Current version of pixman: 0.34.0
[    10.943]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    10.943] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.944] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 10 17:42:43 2019
[    10.946] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.950] (==) No Layout section.  Using the first Screen section.
[    10.950] (==) No screen section available. Using defaults.
[    10.950] (**) |-->Screen "Default Screen Section" (0)
[    10.950] (**) |   |-->Monitor "<default monitor>"
[    10.962] (==) No device specified for screen "Default Screen Section".
  Using the first device section listed.
[    10.962] (**) |   |-->Device "Allwinner A10/A13 FBDEV"
[    10.962] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    10.962] (==) Automatically adding devices
[    10.962] (==) Automatically enabling devices
[    10.962] (==) Automatically adding GPU devices
[    10.962] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    10.964] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[    10.964]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (==) FontPath set to:
  built-ins
[    10.965] (==) ModulePath set to "/usr/lib/xorg/modules"
[    10.965] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.969] (II) Loader magic: 0x1fbf40
[    10.969] (II) Module ABI versions:
[    10.969]  X.Org ANSI C Emulation: 0.4
[    10.969]  X.Org Video Driver: 23.0
[    10.969]  X.Org XInput driver : 24.1
[    10.969]  X.Org Server Extension : 10.0
[    10.972] (++) using VT number 7

[    10.973] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    10.973] (II) no primary bus or device found
[    10.975] (II) LoadModule: "glx"
[    10.979] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    11.133] (II) Module glx: vendor="X.Org Foundation"
[    11.133]  compiled for 1.19.2, module version = 1.0.0
[    11.133]  ABI class: X.Org Server Extension, version 10.0
[    11.133] (II) LoadModule: "fbturbo"
[    11.137] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[    11.145] (II) Module fbturbo: vendor="X.Org Foundation"
[    11.145]  compiled for 1.19.2, module version = 0.5.1
[    11.145]  Module class: X.Org Video Driver
[    11.145]  ABI class: X.Org Video Driver, version 23.0
[    11.145] (II) FBTURBO: driver for framebuffer: fbturbo
[    11.154] (WW) Falling back to old probe method for fbturbo
[    11.154] (II) Loading sub module "fbdevhw"
[    11.154] (II) LoadModule: "fbdevhw"
[    11.155] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    11.161] (II) Module fbdevhw: vendor="X.Org Foundation"
[    11.161]  compiled for 1.19.2, module version = 0.0.2
[    11.162]  ABI class: X.Org Video Driver, version 23.0
[    11.162] (II) FBTURBO(0): using /dev/fb0
[    11.162] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    11.162] (II) FBTURBO(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    11.162] (==) FBTURBO(0): Depth 24, (==) framebuffer bpp 32
[    11.162] (==) FBTURBO(0): RGB weight 888
[    11.162] (==) FBTURBO(0): Default visual is TrueColor
[    11.162] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
[    11.162] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 1500kB)
[    11.163] (**) FBTURBO(0): Option "fbdev" "/dev/fb0"
[    11.163] (**) FBTURBO(0): Option "SwapbuffersWait" "true"
[    11.163] (II) FBTURBO(0): processor: Unknown
[    11.163] (II) FBTURBO(0): checking modes against framebuffer device...
[    11.163] (II) FBTURBO(0): checking modes against monitor...
[    11.163] (--) FBTURBO(0): Virtual size is 800x480 (pitch 800)
[    11.163] (**) FBTURBO(0):  Built-in mode "current"
[    11.163] (==) FBTURBO(0): DPI set to (96, 96)
[    11.164] (II) Loading sub module "fb"
[    11.164] (II) LoadModule: "fb"
[    11.164] (II) Loading /usr/lib/xorg/modules/libfb.so
[    11.183] (II) Module fb: vendor="X.Org Foundation"
[    11.183]  compiled for 1.19.2, module version = 1.0.0
[    11.183]  ABI class: X.Org ANSI C Emulation, version 0.4
[    11.183] (==) Depth 24 pixmap format is 32 bpp
[    11.233] (II) FBTURBO(0): using backing store heuristics
[    11.242] (II) FBTURBO(0): can't load 'g2d_23' kernel module
[    11.242] (II) FBTURBO(0): failed to enable the use of sunxi display controller
[    11.242] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
[    11.243] (II) FBTURBO(0): G2D hardware acceleration can't be enabled
[    11.243] (II) FBTURBO(0): enabled fbdev copyarea acceleration
[    11.243] (==) FBTURBO(0): Backing store enabled
[    11.259] (==) FBTURBO(0): DPMS enabled
[    11.259] (II) FBTURBO(0): failed to enable hardware cursor
[    11.259] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
[    11.259] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
[    11.262] (==) RandR enabled
[    11.316] (II) SELinux: Disabled on system
[    11.325] (II) AIGLX: Screen 0 is not DRI2 capable
[    11.325] (EE) AIGLX: reverting to software rendering
[    13.664] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    13.669] (II) IGLX: Loaded and initialized swrast
[    13.669] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    14.226] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[    14.226] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[    14.226] (II) LoadModule: "libinput"
[    14.227] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    14.270] (II) Module libinput: vendor="X.Org Foundation"
[    14.270]  compiled for 1.19.0, module version = 0.23.0
[    14.270]  Module class: X.Org XInput Driver
[    14.270]  ABI class: X.Org XInput driver, version 24.1
[    14.270] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[    14.270] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    14.270] (**) Option "Device" "/dev/input/event0"
[    14.271] (**) Option "_source" "server/udev"
[    14.273] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[    14.273] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[    14.340] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C01D.0001/input/input0/event0"
[    14.340] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 6)
[    14.341] (**) Option "AccelerationScheme" "none"
[    14.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[    14.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    14.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    14.343] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[    14.343] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[    14.345] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    14.345] (II) No input driver specified, ignoring this device.
[    14.345] (II) This device may have been added with another device file.
[    14.347] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/event1)
[    14.347] (**) FT5406 memory based driver: Applying InputClass "libinput touchscreen catchall"
[    14.347] (II) Using input driver 'libinput' for 'FT5406 memory based driver'
[    14.347] (**) FT5406 memory based driver: always reports core events
Touchs[    14.347] (**) Option "Device" "/dev/input/event1"
[    14.347] (**) Option "_source" "server/udev"
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: creen
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.380] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
[    14.380] (II) XINPUT: Adding extended input device "FT5406 memory based driver" (type: TOUCHSCREEN, id 7)
[    14.380] (**) Option "AccelerationScheme" "none"
[    14.380] (**) FT5406 memory based driver: (accel) selected scheme none/0
[    14.380] (**) FT5406 memory based driver: (accel) acceleration factor: 2.000
[    14.380] (**) FT5406 memory based driver: (accel) acceleration threshold: 4
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: Touchscreen
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.382] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/mouse1)
[    14.382] (II) No input driver specified, ignoring this device.
[    14.382] (II) This device may have been added with another device file.
[   150.705] (II) config/udev: Adding input device HID 04f3:0103 (/dev/input/event2)
[   150.705] (**) HID 04f3:0103: Applying InputClass "libinput keyboard catchall"
[   150.705] (II) Using input driver 'libinput' for 'HID 04f3:0103'
[   150.705] (**) HID 04f3:0103: always reports core events
[   150.705] (**) Option "Device" "/dev/input/event2"
[   150.705] (**) Option "_source" "server/udev"
[   150.709] (II) input device 'HID 04f3:0103', /dev/input/event2 is tagged by udev as: Keyboard
[   150.709] (II) input device 'HID 04f3:0103', /dev/input/event2 is a keyboard
[   150.800] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F3:0103.0002/input/input2/event2"
[   150.800] (II) XINPUT: Adding extended input device "HID 04f3:0103" (type: KEYBOARD, id 8)
[   150.800] (**) Option "xkb_model" "pc105"
[   150.800] (**) Option "xkb_layout" "fr"
[   150.800] (**) Option "xkb_variant" "latin9"
[   150.961] (II) input device 'HID 04f3:0103', /dev/input/event2 is tagged by udev as: Keyboard
[   150.961] (II) input device 'HID 04f3:0103', /dev/input/event2 is a keyboard
[   150.964] (II) config/udev: Adding input device HID 04f3:0103 System Control (/dev/input/event4)
[   150.964] (**) HID 04f3:0103 System Control: Applying InputClass "libinput keyboard catchall"
[   150.964] (II) Using input driver 'libinput' for 'HID 04f3:0103 System Control'
[   150.964] (**) HID 04f3:0103 System Control: always reports core events
[   150.964] (**) Option "Device" "/dev/input/event4"
[   150.965] (**) Option "_source" "server/udev"
[   150.966] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is tagged by udev as: Keyboard
[   150.966] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is a keyboard
[   151.040] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0003/input/input4/event4"
[   151.040] (II) XINPUT: Adding extended input device "HID 04f3:0103 System Control" (type: KEYBOARD, id 9)
[   151.040] (**) Option "xkb_model" "pc105"
[   151.040] (**) Option "xkb_layout" "fr"
[   151.040] (**) Option "xkb_variant" "latin9"
[   151.042] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is tagged by udev as: Keyboard
[   151.042] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is a keyboard
[   151.045] (II) config/udev: Adding input device HID 04f3:0103 Consumer Control (/dev/input/event3)
[   151.045] (**) HID 04f3:0103 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   151.045] (II) Using input driver 'libinput' for 'HID 04f3:0103 Consumer Control'
[   151.045] (**) HID 04f3:0103 Consumer Control: always reports core events
[   151.045] (**) Option "Device" "/dev/input/event3"
[   151.045] (**) Option "_source" "server/udev"
[   151.080] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is tagged by udev as: Keyboard
[   151.080] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is a keyboard
[   151.160] (II) libinput: HID 04f3:0103 Consumer Control: needs a virtual subdevice
[   151.160] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0003/input/input3/event3"
[   151.160] (II) XINPUT: Adding extended input device "HID 04f3:0103 Consumer Control" (type: MOUSE, id 10)
[   151.160] (**) Option "AccelerationScheme" "none"
[   151.160] (**) HID 04f3:0103 Consumer Control: (accel) selected scheme none/0
[   151.160] (**) HID 04f3:0103 Consumer Control: (accel) acceleration factor: 2.000
[   151.160] (**) HID 04f3:0103 Consumer Control: (accel) acceleration threshold: 4
[   151.162] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is tagged by udev as: Keyboard
[   151.162] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is a keyboard
[   151.163] (**) HID 04f3:0103 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   151.163] (II) Using input driver 'libinput' for 'HID 04f3:0103 Consumer Control'
[   151.163] (**) HID 04f3:0103 Consumer Control: always reports core events
[   151.163] (**) Option "Device" "/dev/input/event3"
[   151.163] (**) Option "_source" "_driver/libinput"
[   151.163] (II) libinput: HID 04f3:0103 Consumer Control: is a virtual subdevice
[   151.163] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0003/input/input3/event3"
[   151.163] (II) XINPUT: Adding extended input device "HID 04f3:0103 Consumer Control" (type: KEYBOARD, id 11)
[   151.163] (**) Option "xkb_model" "pc105"
[   151.163] (**) Option "xkb_layout" "fr"
[   151.164] (**) Option "xkb_variant" "latin9"
 



je pense que la partie touch screen est ici


[    14.347] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/event1)
[    14.347] (**) FT5406 memory based driver: Applying InputClass "libinput touchscreen catchall"
[    14.347] (II) Using input driver 'libinput' for 'FT5406 memory based driver'
[    14.347] (**) FT5406 memory based driver: always reports core events
Touchs[    14.347] (**) Option "Device" "/dev/input/event1"
[    14.347] (**) Option "_source" "server/udev"
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: creen
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.380] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
[    14.380] (II) XINPUT: Adding extended input device "FT5406 memory based driver" (type: TOUCHSCREEN, id 7)
[    14.380] (**) Option "AccelerationScheme" "none"
[    14.380] (**) FT5406 memory based driver: (accel) selected scheme none/0
[    14.380] (**) FT5406 memory based driver: (accel) acceleration factor: 2.000
[    14.380] (**) FT5406 memory based driver: (accel) acceleration threshold: 4
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: Touchscreen
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.382] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/mouse1)
[    14.382] (II) No input driver specified, ignoring this device.
[    14.382] (II) This device may have been added with another device file.
 



pour moi c'est trop petit donc il y aussi une souris et un clavier branché  hmm
sinon je suis a jour (dernier noyau 4.19 mais ça fonctionne depuis le 4.9 )
normalement sur le matériel officiel (et les cartes hat ) , il y a un petit circuit pour donner les informations au systéme du PI3
regarde déjà sur ce log si tu a des lignes avec le mot "touchscreen" , pour moi il semble ce nommer "FT5406"
avec un écran externe je fonctionne en 2D/3D , avec ce type d'écran c'est uniquement en 2D

si ça peu t'aider a trouver une solution smile

Dernière modification par anonyme (16-04-2019 08:24:21)

#5 16-04-2019 12:46:12

autrekrikri
Membre
Distrib. : Debian 9
Noyau : Linux 4.9.0-8-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]raspberry pi et écran tactile

Bon alors, la honte ...
Mon câble micro usb était de mauvaise qualité.
Remplacé par un correct, tout fonctionne parfaitement out of box sous raspbian (par contre, pas du tout sous openelec) ...
La honte, la honte ...
kernal_panic.gif

Et merci encore.
Bonne journée.

anonyme a écrit :

Bonjour
je te donne quelques infos sur mon PI3


xrandr
 



xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 480, current 800 x 480, maximum 800 x 480
default connected 800x480+0+0 0mm x 0mm
   800x480        0.00*
 


pour la partie tactile sur le log /var/log/Xorg.0.log

avec un explorateur de fichier ou la commande :


cat /var/log/Xorg.0.log
 




[    10.942]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    10.942] X Protocol Version 11, Revision 0
[    10.942] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[    10.942] Current Operating System: Linux lcdpi1 4.19.25-v7+ #1205 SMP Mon Feb 25 18:19:20 GMT 2019 armv7l
[    10.942] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=dd96ecbf-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    10.943] Build Date: 18 October 2017  04:55:30PM
[    10.943] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[    10.943] Current version of pixman: 0.34.0
[    10.943]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    10.943] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.944] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 10 17:42:43 2019
[    10.946] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.950] (==) No Layout section.  Using the first Screen section.
[    10.950] (==) No screen section available. Using defaults.
[    10.950] (**) |-->Screen "Default Screen Section" (0)
[    10.950] (**) |   |-->Monitor "<default monitor>"
[    10.962] (==) No device specified for screen "Default Screen Section".
  Using the first device section listed.
[    10.962] (**) |   |-->Device "Allwinner A10/A13 FBDEV"
[    10.962] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    10.962] (==) Automatically adding devices
[    10.962] (==) Automatically enabling devices
[    10.962] (==) Automatically adding GPU devices
[    10.962] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    10.964] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[    10.964]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    10.965]  Entry deleted from font path.
[    10.965] (==) FontPath set to:
  built-ins
[    10.965] (==) ModulePath set to "/usr/lib/xorg/modules"
[    10.965] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.969] (II) Loader magic: 0x1fbf40
[    10.969] (II) Module ABI versions:
[    10.969]  X.Org ANSI C Emulation: 0.4
[    10.969]  X.Org Video Driver: 23.0
[    10.969]  X.Org XInput driver : 24.1
[    10.969]  X.Org Server Extension : 10.0
[    10.972] (++) using VT number 7

[    10.973] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    10.973] (II) no primary bus or device found
[    10.975] (II) LoadModule: "glx"
[    10.979] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    11.133] (II) Module glx: vendor="X.Org Foundation"
[    11.133]  compiled for 1.19.2, module version = 1.0.0
[    11.133]  ABI class: X.Org Server Extension, version 10.0
[    11.133] (II) LoadModule: "fbturbo"
[    11.137] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[    11.145] (II) Module fbturbo: vendor="X.Org Foundation"
[    11.145]  compiled for 1.19.2, module version = 0.5.1
[    11.145]  Module class: X.Org Video Driver
[    11.145]  ABI class: X.Org Video Driver, version 23.0
[    11.145] (II) FBTURBO: driver for framebuffer: fbturbo
[    11.154] (WW) Falling back to old probe method for fbturbo
[    11.154] (II) Loading sub module "fbdevhw"
[    11.154] (II) LoadModule: "fbdevhw"
[    11.155] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    11.161] (II) Module fbdevhw: vendor="X.Org Foundation"
[    11.161]  compiled for 1.19.2, module version = 0.0.2
[    11.162]  ABI class: X.Org Video Driver, version 23.0
[    11.162] (II) FBTURBO(0): using /dev/fb0
[    11.162] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    11.162] (II) FBTURBO(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    11.162] (==) FBTURBO(0): Depth 24, (==) framebuffer bpp 32
[    11.162] (==) FBTURBO(0): RGB weight 888
[    11.162] (==) FBTURBO(0): Default visual is TrueColor
[    11.162] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
[    11.162] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 1500kB)
[    11.163] (**) FBTURBO(0): Option "fbdev" "/dev/fb0"
[    11.163] (**) FBTURBO(0): Option "SwapbuffersWait" "true"
[    11.163] (II) FBTURBO(0): processor: Unknown
[    11.163] (II) FBTURBO(0): checking modes against framebuffer device...
[    11.163] (II) FBTURBO(0): checking modes against monitor...
[    11.163] (--) FBTURBO(0): Virtual size is 800x480 (pitch 800)
[    11.163] (**) FBTURBO(0):  Built-in mode "current"
[    11.163] (==) FBTURBO(0): DPI set to (96, 96)
[    11.164] (II) Loading sub module "fb"
[    11.164] (II) LoadModule: "fb"
[    11.164] (II) Loading /usr/lib/xorg/modules/libfb.so
[    11.183] (II) Module fb: vendor="X.Org Foundation"
[    11.183]  compiled for 1.19.2, module version = 1.0.0
[    11.183]  ABI class: X.Org ANSI C Emulation, version 0.4
[    11.183] (==) Depth 24 pixmap format is 32 bpp
[    11.233] (II) FBTURBO(0): using backing store heuristics
[    11.242] (II) FBTURBO(0): can't load 'g2d_23' kernel module
[    11.242] (II) FBTURBO(0): failed to enable the use of sunxi display controller
[    11.242] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
[    11.243] (II) FBTURBO(0): G2D hardware acceleration can't be enabled
[    11.243] (II) FBTURBO(0): enabled fbdev copyarea acceleration
[    11.243] (==) FBTURBO(0): Backing store enabled
[    11.259] (==) FBTURBO(0): DPMS enabled
[    11.259] (II) FBTURBO(0): failed to enable hardware cursor
[    11.259] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
[    11.259] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
[    11.262] (==) RandR enabled
[    11.316] (II) SELinux: Disabled on system
[    11.325] (II) AIGLX: Screen 0 is not DRI2 capable
[    11.325] (EE) AIGLX: reverting to software rendering
[    13.664] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    13.669] (II) IGLX: Loaded and initialized swrast
[    13.669] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    14.226] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[    14.226] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[    14.226] (II) LoadModule: "libinput"
[    14.227] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    14.270] (II) Module libinput: vendor="X.Org Foundation"
[    14.270]  compiled for 1.19.0, module version = 0.23.0
[    14.270]  Module class: X.Org XInput Driver
[    14.270]  ABI class: X.Org XInput driver, version 24.1
[    14.270] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[    14.270] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    14.270] (**) Option "Device" "/dev/input/event0"
[    14.271] (**) Option "_source" "server/udev"
[    14.273] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[    14.273] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[    14.340] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C01D.0001/input/input0/event0"
[    14.340] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 6)
[    14.341] (**) Option "AccelerationScheme" "none"
[    14.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[    14.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    14.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    14.343] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[    14.343] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[    14.345] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    14.345] (II) No input driver specified, ignoring this device.
[    14.345] (II) This device may have been added with another device file.
[    14.347] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/event1)
[    14.347] (**) FT5406 memory based driver: Applying InputClass "libinput touchscreen catchall"
[    14.347] (II) Using input driver 'libinput' for 'FT5406 memory based driver'
[    14.347] (**) FT5406 memory based driver: always reports core events
Touchs[    14.347] (**) Option "Device" "/dev/input/event1"
[    14.347] (**) Option "_source" "server/udev"
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: creen
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.380] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
[    14.380] (II) XINPUT: Adding extended input device "FT5406 memory based driver" (type: TOUCHSCREEN, id 7)
[    14.380] (**) Option "AccelerationScheme" "none"
[    14.380] (**) FT5406 memory based driver: (accel) selected scheme none/0
[    14.380] (**) FT5406 memory based driver: (accel) acceleration factor: 2.000
[    14.380] (**) FT5406 memory based driver: (accel) acceleration threshold: 4
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: Touchscreen
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.382] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/mouse1)
[    14.382] (II) No input driver specified, ignoring this device.
[    14.382] (II) This device may have been added with another device file.
[   150.705] (II) config/udev: Adding input device HID 04f3:0103 (/dev/input/event2)
[   150.705] (**) HID 04f3:0103: Applying InputClass "libinput keyboard catchall"
[   150.705] (II) Using input driver 'libinput' for 'HID 04f3:0103'
[   150.705] (**) HID 04f3:0103: always reports core events
[   150.705] (**) Option "Device" "/dev/input/event2"
[   150.705] (**) Option "_source" "server/udev"
[   150.709] (II) input device 'HID 04f3:0103', /dev/input/event2 is tagged by udev as: Keyboard
[   150.709] (II) input device 'HID 04f3:0103', /dev/input/event2 is a keyboard
[   150.800] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F3:0103.0002/input/input2/event2"
[   150.800] (II) XINPUT: Adding extended input device "HID 04f3:0103" (type: KEYBOARD, id 8)
[   150.800] (**) Option "xkb_model" "pc105"
[   150.800] (**) Option "xkb_layout" "fr"
[   150.800] (**) Option "xkb_variant" "latin9"
[   150.961] (II) input device 'HID 04f3:0103', /dev/input/event2 is tagged by udev as: Keyboard
[   150.961] (II) input device 'HID 04f3:0103', /dev/input/event2 is a keyboard
[   150.964] (II) config/udev: Adding input device HID 04f3:0103 System Control (/dev/input/event4)
[   150.964] (**) HID 04f3:0103 System Control: Applying InputClass "libinput keyboard catchall"
[   150.964] (II) Using input driver 'libinput' for 'HID 04f3:0103 System Control'
[   150.964] (**) HID 04f3:0103 System Control: always reports core events
[   150.964] (**) Option "Device" "/dev/input/event4"
[   150.965] (**) Option "_source" "server/udev"
[   150.966] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is tagged by udev as: Keyboard
[   150.966] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is a keyboard
[   151.040] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0003/input/input4/event4"
[   151.040] (II) XINPUT: Adding extended input device "HID 04f3:0103 System Control" (type: KEYBOARD, id 9)
[   151.040] (**) Option "xkb_model" "pc105"
[   151.040] (**) Option "xkb_layout" "fr"
[   151.040] (**) Option "xkb_variant" "latin9"
[   151.042] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is tagged by udev as: Keyboard
[   151.042] (II) input device 'HID 04f3:0103 System Control', /dev/input/event4 is a keyboard
[   151.045] (II) config/udev: Adding input device HID 04f3:0103 Consumer Control (/dev/input/event3)
[   151.045] (**) HID 04f3:0103 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   151.045] (II) Using input driver 'libinput' for 'HID 04f3:0103 Consumer Control'
[   151.045] (**) HID 04f3:0103 Consumer Control: always reports core events
[   151.045] (**) Option "Device" "/dev/input/event3"
[   151.045] (**) Option "_source" "server/udev"
[   151.080] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is tagged by udev as: Keyboard
[   151.080] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is a keyboard
[   151.160] (II) libinput: HID 04f3:0103 Consumer Control: needs a virtual subdevice
[   151.160] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0003/input/input3/event3"
[   151.160] (II) XINPUT: Adding extended input device "HID 04f3:0103 Consumer Control" (type: MOUSE, id 10)
[   151.160] (**) Option "AccelerationScheme" "none"
[   151.160] (**) HID 04f3:0103 Consumer Control: (accel) selected scheme none/0
[   151.160] (**) HID 04f3:0103 Consumer Control: (accel) acceleration factor: 2.000
[   151.160] (**) HID 04f3:0103 Consumer Control: (accel) acceleration threshold: 4
[   151.162] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is tagged by udev as: Keyboard
[   151.162] (II) input device 'HID 04f3:0103 Consumer Control', /dev/input/event3 is a keyboard
[   151.163] (**) HID 04f3:0103 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   151.163] (II) Using input driver 'libinput' for 'HID 04f3:0103 Consumer Control'
[   151.163] (**) HID 04f3:0103 Consumer Control: always reports core events
[   151.163] (**) Option "Device" "/dev/input/event3"
[   151.163] (**) Option "_source" "_driver/libinput"
[   151.163] (II) libinput: HID 04f3:0103 Consumer Control: is a virtual subdevice
[   151.163] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0003/input/input3/event3"
[   151.163] (II) XINPUT: Adding extended input device "HID 04f3:0103 Consumer Control" (type: KEYBOARD, id 11)
[   151.163] (**) Option "xkb_model" "pc105"
[   151.163] (**) Option "xkb_layout" "fr"
[   151.164] (**) Option "xkb_variant" "latin9"
 



je pense que la partie touch screen est ici


[    14.347] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/event1)
[    14.347] (**) FT5406 memory based driver: Applying InputClass "libinput touchscreen catchall"
[    14.347] (II) Using input driver 'libinput' for 'FT5406 memory based driver'
[    14.347] (**) FT5406 memory based driver: always reports core events
Touchs[    14.347] (**) Option "Device" "/dev/input/event1"
[    14.347] (**) Option "_source" "server/udev"
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: creen
[    14.348] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.380] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
[    14.380] (II) XINPUT: Adding extended input device "FT5406 memory based driver" (type: TOUCHSCREEN, id 7)
[    14.380] (**) Option "AccelerationScheme" "none"
[    14.380] (**) FT5406 memory based driver: (accel) selected scheme none/0
[    14.380] (**) FT5406 memory based driver: (accel) acceleration factor: 2.000
[    14.380] (**) FT5406 memory based driver: (accel) acceleration threshold: 4
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is tagged by udev as: Touchscreen
[    14.381] (II) input device 'FT5406 memory based driver', /dev/input/event1 is a touch device
[    14.382] (II) config/udev: Adding input device FT5406 memory based driver (/dev/input/mouse1)
[    14.382] (II) No input driver specified, ignoring this device.
[    14.382] (II) This device may have been added with another device file.
 



pour moi c'est trop petit donc il y aussi une souris et un clavier branché  hmm
sinon je suis a jour (dernier noyau 4.19 mais ça fonctionne depuis le 4.9 )
normalement sur le matériel officiel (et les cartes hat ) , il y a un petit circuit pour donner les informations au systéme du PI3
regarde déjà sur ce log si tu a des lignes avec le mot "touchscreen" , pour moi il semble ce nommer "FT5406"
avec un écran externe je fonctionne en 2D/3D , avec ce type d'écran c'est uniquement en 2D

si ça peu t'aider a trouver une solution smile

Dernière modification par autrekrikri (16-04-2019 12:47:36)

Hors ligne

Pied de page des forums