Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
Vous n'êtes pas identifié(e).
System: Host: X Kernel: 4.9.0-8-amd64 x86_64 (64 bit) Desktop: Xfce 4.12.3
Distro: Debian GNU/Linux 9 (stretch)
Machine: Device: desktop Mobo: ASUSTeK model: A8V-VM v: Rev 1.xx serial: MB-1234567890
BIOS: American Megatrends v: 080012 date: 06/19/2006
CPU: Single core AMD Athlon 64 3000+ (-UP-) cache: 512 KB
speed: 1800 MHz (max)
Graphics: Card: VIA K8M890CE/K8N890CE [Chrome 9]
Display Server: X.org 1.19.2 drivers: vesa (unloaded: modesetting,fbdev)
tty size: 80x24 Advanced Data: N/A for root
Audio: Card VIA VT8237A/VT8251 HDA Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.9.0-8-amd64
Network: Card-1: VIA VT6102/VT6103 [Rhine-II] driver: via-rhine
IF: enp0s18 state: down mac: 00:18:f3:02:d9:65
Card-2: Qualcomm Atheros AR5212/5213/2414 Wireless Network Adapter
driver: ath5k
IF: wlp5s9 state: up mac: 00:21:91:55:96:3f
Drives: HDD Total Size: 160.0GB (3.7% used)
ID-1: /dev/sda model: ST3160812A size: 160.0GB
Partition: ID-1: / size: 28G used: 3.9G (15%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 118G used: 264M (1%) fs: ext4 dev: /dev/sda6
ID-3: swap-1 size: 1.54GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
Sensors: System Temperatures: cpu: 35.0C mobo: 29.0C
Fan Speeds (in rpm): cpu: 3308 sys-1: 0
Info: Processes: 133 Uptime: 7 min Memory: 486.6/1436.1MB
Client: Shell (bash) inxi: 2.3.5
Mon problème : au démarrage du PC, j'ai ce message 
Ci-joint, le journal du démarrage
[ 0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.144-3.1 (2019-02-19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=aebb4547-c9fc-4eb9-92c7-d06112c8f048 ro quiet
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005bfaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005bfb0000-0x000000005bfbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005bfbe000-0x000000005bfdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005bfe0000-0x000000005bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V-VM, BIOS 080012 06/19/2006
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: pci 0000:00:00:00: AGP bridge
[ 0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf1ffffff] (old size 32MB)
[ 0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf7ffffff] (128MB, APSIZE 0xf20)
[ 0.000000] e820: last_pfn = 0x5bfb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff905c400ff780]
[ 0.000000] Base memory trampoline at [ffff905c40099000] 99000 size 24576
[ 0.000000] BRK [0x54f34000, 0x54f34fff] PGTABLE
[ 0.000000] BRK [0x54f35000, 0x54f35fff] PGTABLE
[ 0.000000] BRK [0x54f36000, 0x54f36fff] PGTABLE
[ 0.000000] BRK [0x54f37000, 0x54f37fff] PGTABLE
[ 0.000000] BRK [0x54f38000, 0x54f38fff] PGTABLE
[ 0.000000] BRK [0x54f39000, 0x54f39fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35817000-0x36c02fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FA850 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000005BFB0000 000034 (v01 A M I OEMRSDT 06000619 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000005BFB0200 000084 (v02 A M I OEMFACP 06000619 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000005BFB0440 00498E (v01 A0339 A0339000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000005BFBE000 000040
[ 0.000000] ACPI: APIC 0x000000005BFB0390 000068 (v01 A M I OEMAPIC 06000619 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000005BFB0400 00003C (v01 A M I OEMMCFG 06000619 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000005BFBE040 000046 (v01 A M I AMI_OEM 06000619 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005bfaffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x5bfab000-0x5bfaffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000005bfaffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000005bfaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000005bfaffff]
[ 0.000000] On node 0 totalpages: 376654
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5823 pages used for memmap
[ 0.000000] DMA32 zone: 372656 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x5c000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff905c9bc00000 s105304 r8192 d29864 u1048576
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 370746
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=aebb4547-c9fc-4eb9-92c7-d06112c8f048 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: pci 0000:00:00:00: AGP bridge
[ 0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf1ffffff] (old size 32MB)
[ 0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf0000000-0xf7ffffff] (128MB, APSIZE 0xf20)
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf0000000-0xf7ffffff] (128MB)
[ 0.000000] Memory: 1445580K/1506616K available (6268K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 61036K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1800.067 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.13 BogoMIPS (lpj=7200268)
[ 0.004027] pid_max: default: 32768 minimum: 301
[ 0.004065] ACPI: Core revision 20160831
[ 0.012305] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.012432] Security Framework initialized
[ 0.012437] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012450] AppArmor: AppArmor disabled by boot time parameter
[ 0.012711] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.015472] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.016920] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.016927] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.017724] mce: CPU supports 5 MCE banks
[ 0.017742] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.017744] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.017748] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.017812] Spectre V2 : Mitigation: Full generic retpoline
[ 0.017813] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.032012] ftrace: allocating 25295 entries in 99 pages
[ 0.056446] smpboot: Max logical packages: 2
[ 0.056965] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.100000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3000+ (family: 0xf, model: 0x2f, stepping: 0x2)
[ 0.100000] Performance Events: AMD PMU driver.
[ 0.100000] ... version: 0
[ 0.100000] ... bit width: 48
[ 0.100000] ... generic registers: 4
[ 0.100000] ... value mask: 0000ffffffffffff
[ 0.100000] ... max period: 00007fffffffffff
[ 0.100000] ... fixed-purpose events: 0
[ 0.100000] ... event mask: 000000000000000f
[ 0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100000] x86: Booted up 1 node, 1 CPUs
[ 0.100000] smpboot: Total of 1 processors activated (3600.13 BogoMIPS)
[ 0.100000] devtmpfs: initialized
[ 0.100000] x86/mm: Memory block size: 128MB
[ 0.104465] PM: Registering ACPI NVS region [mem 0x5bfbe000-0x5bfdffff] (139264 bytes)
[ 0.104551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.104562] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.104635] pinctrl core: initialized pinctrl subsystem
[ 0.104868] NET: Registered protocol family 16
[ 0.105189] cpuidle: using governor ladder
[ 0.105191] cpuidle: using governor menu
[ 0.105197] node 0 link 0: io port [1000, ffffff]
[ 0.105200] TOM: 0000000060000000 aka 1536M
[ 0.105203] node 0 link 0: mmio [a0000, bffff]
[ 0.105207] node 0 link 0: mmio [60000000, ffffffff]
[ 0.105210] bus: [bus 00-ff] on node 0 link 0
[ 0.105211] bus: 00 [io 0x0000-0xffff]
[ 0.105213] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.105214] bus: 00 [mem 0x60000000-0xfcffffffff]
[ 0.105245] ACPI: bus type PCI registered
[ 0.105248] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.105350] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.105353] PCI: not using MMCONFIG
[ 0.105354] PCI: Using configuration type 1 for base access
[ 0.106887] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.107450] ACPI: Added _OSI(Module Device)
[ 0.107452] ACPI: Added _OSI(Processor Device)
[ 0.107453] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.107454] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107714] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.112081] ACPI: Interpreter enabled
[ 0.112121] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.112122] ACPI: Using IOAPIC for interrupt routing
[ 0.112171] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.113997] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.114023] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.123329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.123340] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.123347] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.123808] PCI host bridge to bus 0000:00
[ 0.123811] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.123814] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.123816] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.123818] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.123820] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfff7ffff window]
[ 0.123823] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.123844] pci 0000:00:00.0: [1106:0336] type 00 class 0x060000
[ 0.123862] pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.124104] pci 0000:00:00.1: [1106:1336] type 00 class 0x060000
[ 0.124288] pci 0000:00:00.2: [1106:2336] type 00 class 0x060000
[ 0.124468] pci 0000:00:00.3: [1106:3336] type 00 class 0x060000
[ 0.124656] pci 0000:00:00.4: [1106:4336] type 00 class 0x060000
[ 0.124836] pci 0000:00:00.5: [1106:5336] type 00 class 0x080020
[ 0.125032] pci 0000:00:00.6: [1106:6290] type 00 class 0x060000
[ 0.125213] pci 0000:00:00.7: [1106:7336] type 00 class 0x060000
[ 0.125395] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[ 0.125445] pci 0000:00:01.0: supports D1
[ 0.125594] pci 0000:00:0f.0: [1106:3349] type 00 class 0x010400
[ 0.125611] pci 0000:00:0f.0: reg 0x10: [io 0xe800-0xe807]
[ 0.125621] pci 0000:00:0f.0: reg 0x14: [io 0xe400-0xe403]
[ 0.125630] pci 0000:00:0f.0: reg 0x18: [io 0xe000-0xe007]
[ 0.125640] pci 0000:00:0f.0: reg 0x1c: [io 0xd800-0xd803]
[ 0.125649] pci 0000:00:0f.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.125659] pci 0000:00:0f.0: reg 0x24: [mem 0xf9fffc00-0xf9ffffff]
[ 0.125705] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.125850] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[ 0.125894] pci 0000:00:0f.1: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.125914] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.125916] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.125918] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.125920] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.126085] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.126128] pci 0000:00:10.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.126171] pci 0000:00:10.0: supports D1 D2
[ 0.126173] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126259] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.126323] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.126366] pci 0000:00:10.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.126409] pci 0000:00:10.1: supports D1 D2
[ 0.126411] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126495] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.126555] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.126598] pci 0000:00:10.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.126640] pci 0000:00:10.2: supports D1 D2
[ 0.126642] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126727] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.126790] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.126833] pci 0000:00:10.3: reg 0x20: [io 0xc000-0xc01f]
[ 0.126876] pci 0000:00:10.3: supports D1 D2
[ 0.126878] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126962] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.127024] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.127041] pci 0000:00:10.4: reg 0x10: [mem 0xf9fff800-0xf9fff8ff]
[ 0.127116] pci 0000:00:10.4: supports D1 D2
[ 0.127118] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127264] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100
[ 0.127492] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[ 0.127671] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.127686] pci 0000:00:12.0: reg 0x10: [io 0xb800-0xb8ff]
[ 0.127696] pci 0000:00:12.0: reg 0x14: [mem 0xf9fff400-0xf9fff4ff]
[ 0.127761] pci 0000:00:12.0: supports D1 D2
[ 0.127763] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127846] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.127908] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400
[ 0.128074] pci 0000:00:13.1: [1106:287a] type 01 class 0x060401
[ 0.128246] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.128383] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.128515] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.128647] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.128840] pci 0000:01:00.0: [1106:3230] type 00 class 0x030000
[ 0.128854] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.128861] pci 0000:01:00.0: reg 0x14: [mem 0xfa000000-0xfaffffff]
[ 0.128892] pci 0000:01:00.0: reg 0x30: [mem 0xfbdf0000-0xfbdfffff pref]
[ 0.128922] pci 0000:01:00.0: supports D1 D2
[ 0.129003] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.129010] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.129014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.129080] pci 0000:04:01.0: [1106:3288] type 00 class 0x040300
[ 0.129093] pci 0000:04:01.0: reg 0x10: [mem 0xfbefc000-0xfbefffff]
[ 0.129175] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.129258] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.129294] pci 0000:00:13.0: PCI bridge to [bus 04]
[ 0.129299] pci 0000:00:13.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.129399] pci 0000:05:09.0: [168c:0013] type 00 class 0x020000
[ 0.129415] pci 0000:05:09.0: reg 0x10: [mem 0xfbff0000-0xfbffffff]
[ 0.129516] pci 0000:05:09.0: System wakeup disabled by ACPI
[ 0.129597] pci 0000:00:13.1: PCI bridge to [bus 05] (subtractive decode)
[ 0.129602] pci 0000:00:13.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.129607] pci 0000:00:13.1: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.129609] pci 0000:00:13.1: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.129612] pci 0000:00:13.1: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.129614] pci 0000:00:13.1: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.129616] pci 0000:00:13.1: bridge window [mem 0x60000000-0xfff7ffff window] (subtractive decode)
[ 0.130874] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.130958] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.131039] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.131120] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.131200] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.131282] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.131364] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.131448] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.131818] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.131822] vgaarb: loaded
[ 0.131823] vgaarb: bridge control possible 0000:01:00.0
[ 0.132067] PCI: Using ACPI for IRQ routing
[ 0.140403] PCI: pci_cache_line_size set to 64 bytes
[ 0.140491] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.140493] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.140496] e820: reserve RAM buffer [mem 0x5bfb0000-0x5bffffff]
[ 0.140812] clocksource: Switched to clocksource refined-jiffies
[ 0.158072] VFS: Disk quotas dquot_6.6.0
[ 0.158139] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.158352] pnp: PnP ACPI init
[ 0.158541] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.158970] pnp 00:01: [dma 2]
[ 0.159042] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.159391] pnp 00:02: [dma 3]
[ 0.159551] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.159719] system 00:03: [io 0x0290-0x0297] has been reserved
[ 0.159724] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159921] system 00:04: [io 0x03e0-0x03e7] has been reserved
[ 0.159924] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.159927] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.159929] system 00:04: [io 0x0400-0x041f] has been reserved
[ 0.159933] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.159936] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160146] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.160149] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.160152] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160443] pnp 00:06: [dma 0 disabled]
[ 0.160569] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.160662] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.160666] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161163] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.161166] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.161169] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.161171] system 00:08: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.161174] system 00:08: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.161177] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.161389] pnp: PnP ACPI: found 9 devices
[ 0.168607] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.168630] clocksource: Switched to clocksource acpi_pm
[ 0.168701] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.168709] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.168713] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.168720] pci 0000:00:13.0: PCI bridge to [bus 04]
[ 0.168725] pci 0000:00:13.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.168733] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.168737] pci 0000:00:13.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.168748] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.168751] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.168753] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.168755] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.168757] pci_bus 0000:00: resource 8 [mem 0x60000000-0xfff7ffff window]
[ 0.168760] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbdfffff]
[ 0.168762] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.168764] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.168767] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.168769] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.168771] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.168773] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.168775] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.168777] pci_bus 0000:05: resource 8 [mem 0x60000000-0xfff7ffff window]
[ 0.168966] NET: Registered protocol family 2
[ 0.169336] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.169527] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.169781] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.169956] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.170006] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.170212] NET: Registered protocol family 1
[ 0.170243] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.170278] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.171327] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.171336] PCI: CLS 64 bytes, default 64
[ 0.171478] Unpacking initramfs...
[ 0.785109] Freeing initrd memory: 20400K
[ 0.785268] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[ 0.790465] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 0.790561] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f268c5231, max_idle_ns: 440795220318 ns
[ 0.790974] audit: initializing netlink subsys (disabled)
[ 0.791013] audit: type=2000 audit(1555669301.787:1): initialized
[ 0.791641] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 0.791673] zbud: loaded
[ 0.792967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.793015] io scheduler noop registered
[ 0.793017] io scheduler deadline registered
[ 0.793034] io scheduler cfq registered (default)
[ 0.793216] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.793224] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.793480] GHES: HEST is not enabled!
[ 0.793598] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.814120] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.814643] Linux agpgart interface v0.103
[ 0.814737] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.814738] AMD IOMMUv2 functionality not available on this system
[ 0.814910] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.815374] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.815382] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.815588] mousedev: PS/2 mouse device common for all mice
[ 0.815653] rtc_cmos 00:00: RTC can wake from S4
[ 0.815865] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.815900] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.815929] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.816681] NET: Registered protocol family 10
[ 0.817126] mip6: Mobile IPv6
[ 0.817130] NET: Registered protocol family 17
[ 0.817133] mpls_gso: MPLS GSO support
[ 0.817504] registered taskstats version 1
[ 0.817528] zswap: loaded using pool lzo/zbud
[ 0.817624] ima: No TPM chip found, activating TPM-bypass!
[ 0.817628] ima: Allocated hash algorithm: sha256
[ 0.818123] rtc_cmos 00:00: setting system clock to 2019-04-19 10:21:42 UTC (1555669302)
[ 0.818179] PM: Hibernation image not present or could not be loaded.
[ 0.821535] Freeing unused kernel memory: 1424K
[ 0.821540] Write protecting the kernel read-only data: 12288k
[ 0.824733] Freeing unused kernel memory: 1908K
[ 0.830626] Freeing unused kernel memory: 1224K
[ 0.842887] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.873038] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.873184] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.873200] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.967960] SCSI subsystem initialized
[ 0.992183] ACPI: bus type USB registered
[ 0.992227] usbcore: registered new interface driver usbfs
[ 0.992242] usbcore: registered new interface driver hub
[ 0.992299] libata version 3.00 loaded.
[ 0.992810] pata_via 0000:00:0f.1: version 0.3.4
[ 0.995743] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 0.996116] usbcore: registered new device driver usb
[ 0.997350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.997998] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.998881] ehci-pci: EHCI PCI platform driver
[ 1.006110] scsi host0: pata_via
[ 1.012648] Floppy drive(s): fd0 is 1.44M
[ 1.012734] scsi host1: pata_via
[ 1.012834] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.012836] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.013375] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1b800, 00:18:f3:02:d9:65, IRQ 23
[ 1.014149] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000
[ 1.014349] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.014358] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.014367] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.014398] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d000
[ 1.014523] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.014525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.014527] usb usb1: Product: UHCI Host Controller
[ 1.014529] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[ 1.014531] usb usb1: SerialNumber: 0000:00:10.0
[ 1.014764] hub 1-0:1.0: USB hub found
[ 1.014776] hub 1-0:1.0: 2 ports detected
[ 1.016512] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 1.016522] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[ 1.016536] ehci-pci 0000:00:10.4: debug port 1
[ 1.016585] ehci-pci 0000:00:10.4: irq 22, io mem 0xf9fff800
[ 1.032070] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.032342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.032345] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032347] usb usb2: Product: EHCI Host Controller
[ 1.032349] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[ 1.032350] usb usb2: SerialNumber: 0000:00:10.4
[ 1.032559] hub 2-0:1.0: USB hub found
[ 1.032574] hub 2-0:1.0: 8 ports detected
[ 1.039794] FDC 0 is a post-1991 82077
[ 1.060212] hub 1-0:1.0: USB hub found
[ 1.060227] hub 1-0:1.0: 2 ports detected
[ 1.060518] ahci 0000:00:0f.0: version 3.0
[ 1.060728] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
[ 1.060730] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
[ 1.060804] ahci 0000:00:0f.0: PCI: Disallowing DAC for device
[ 1.060836] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 1.060841] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
[ 1.066384] scsi host2: ahci
[ 1.068442] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
[ 1.074765] scsi host3: ahci
[ 1.075390] scsi host4: ahci
[ 1.075734] scsi host5: ahci
[ 1.075822] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 21
[ 1.075825] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 21
[ 1.075827] ata5: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 21
[ 1.075829] ata6: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 21
[ 1.076427] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.076440] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.076454] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.076481] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
[ 1.077099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.077104] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.077106] usb usb3: Product: UHCI Host Controller
[ 1.077107] usb usb3: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[ 1.077109] usb usb3: SerialNumber: 0000:00:10.1
[ 1.077504] hub 3-0:1.0: USB hub found
[ 1.077633] hub 3-0:1.0: 2 ports detected
[ 1.077970] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.077979] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.077988] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.078011] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
[ 1.078120] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.078122] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.078124] usb usb4: Product: UHCI Host Controller
[ 1.078126] usb usb4: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[ 1.078128] usb usb4: SerialNumber: 0000:00:10.2
[ 1.078500] hub 4-0:1.0: USB hub found
[ 1.078634] hub 4-0:1.0: 2 ports detected
[ 1.078900] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.078911] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.078919] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.078955] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000c000
[ 1.079041] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.079043] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.079045] usb usb5: Product: UHCI Host Controller
[ 1.079047] usb usb5: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
[ 1.079049] usb usb5: SerialNumber: 0000:00:10.3
[ 1.079401] hub 5-0:1.0: USB hub found
[ 1.079531] hub 5-0:1.0: 2 ports detected
[ 1.226033] ata1.00: ATA-7: ST3160812A, 3.AAJ, max UDMA/100
[ 1.226038] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.300845] ata1.00: configured for UDMA/100
[ 1.301109] scsi 0:0:0:0: Direct-Access ATA ST3160812A J PQ: 0 ANSI: 5
[ 1.390460] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.398481] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.398506] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.398530] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.462699] ata2.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66
[ 1.467385] ata2.00: configured for UDMA/66
[ 1.480287] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5
[ 1.505644] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.505715] sd 0:0:0:0: [sda] Write Protect is off
[ 1.505718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.505749] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.526404] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.526409] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.526730] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.540087] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.546242] sda: sda1 sda2 < sda5 sda6 >
[ 1.546859] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.678542] random: fast init done
[ 1.729079] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
[ 1.729084] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.729086] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 1.729088] usb 3-1: Manufacturer: Logitech
[ 1.735796] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.750913] usbcore: registered new interface driver usbhid
[ 1.750916] usbhid: USB HID core driver
[ 1.752593] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/0003:046D:C00E.0001/input/input3
[ 1.752888] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1/input0
[ 2.262257] PM: Starting manual resume from disk
[ 2.262264] PM: Hibernation image partition 8:5 present
[ 2.262266] PM: Looking for hibernation image.
[ 2.262590] PM: Image not found (code -22)
[ 2.262591] PM: Hibernation image not present or could not be loaded.
[ 2.404057] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ 2.583430] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.592053] usb 3-2: New USB device found, idVendor=03f0, idProduct=0024
[ 2.592056] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.592058] usb 3-2: Product: HP Basic USB Keyboard
[ 2.592060] usb 3-2: Manufacturer: CHICONY
[ 2.610897] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:03F0:0024.0002/input/input4
[ 2.668239] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.1-2/input0
[ 3.687591] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.757953] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.758174] systemd[1]: Detected architecture x86-64.
[ 3.770298] systemd[1]: Set hostname to <X>.
[ 4.610075] random: crng init done
[ 4.610081] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.969730] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.970074] systemd[1]: Listening on Journal Audit Socket.
[ 4.970389] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.970489] systemd[1]: Listening on udev Control Socket.
[ 4.970561] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.970828] systemd[1]: Created slice User and Session Slice.
[ 4.970900] systemd[1]: Listening on Syslog Socket.
[ 5.519280] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.657369] lp: driver loaded but no devices found
[ 5.719345] systemd-journald[183]: Received request to flush runtime journal from PID 1
[ 5.881516] ppdev: user-space parallel port driver
[ 5.902227] parport_pc 00:02: reported by Plug and Play ACPI
[ 5.902350] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 5.996196] lp0: using parport0 (interrupt-driven).
[ 6.825299] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 6.825309] ACPI: Sleep Button [SLPB]
[ 6.825387] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.825390] ACPI: Power Button [PWRB]
[ 6.825456] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.825458] ACPI: Power Button [PWRF]
[ 6.860697] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.076793] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.076847] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.403823] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 7.640014] snd_hda_intel 0000:04:01.0: CORB reset timeout#1, CORBRP = 0
[ 7.643175] EDAC MC: Ver: 3.0.0
[ 7.681163] MCE: In-kernel MCE decoding enabled.
[ 7.705218] EDAC amd64: DRAM ECC disabled.
[ 7.705224] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.725909] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
[ 7.725967] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 8.158505] ath5k 0000:05:09.0: registered as 'phy0'
[ 8.235552] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1986A: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 8.235557] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.235562] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 8.235564] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 8.235566] snd_hda_codec_analog hdaudioC0D0: dig-out=0x25/0x0
[ 8.235568] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 8.235571] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x1d
[ 8.235573] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x1f
[ 8.235575] snd_hda_codec_analog hdaudioC0D0: Line=0x1c
[ 8.235577] snd_hda_codec_analog hdaudioC0D0: CD=0x22
[ 8.258675] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input9
[ 8.259848] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input10
[ 8.261180] input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input11
[ 8.261288] input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input12
[ 8.261388] input: HDA VIA VT82xx Line Out as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input13
[ 8.261487] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input14
[ 8.798178] ath: EEPROM regdomain: 0x30
[ 8.798181] ath: EEPROM indicates we should expect a direct regpair map
[ 8.798183] ath: Country alpha2 being used: AM
[ 8.798184] ath: Regpair used: 0x30
[ 8.855131] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.855528] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 9.708581] Adding 1505276k swap on /dev/sda5. Priority:-1 extents:1 across:1505276k FS
[ 9.966312] ath5k 0000:05:09.0 wlp5s9: renamed from wlan0
[ 11.898015] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.200057] usb 2-8: new high-speed USB device number 4 using ehci-pci
[ 14.350571] usb 2-8: New USB device found, idVendor=05ac, idProduct=12a8
[ 14.350575] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 14.350577] usb 2-8: Product: iPhone
[ 14.350579] usb 2-8: Manufacturer: Apple Inc.
[ 14.350581] usb 2-8: SerialNumber: 1eb5c6ea2ac2056ae50f68ea0c7413216300d23e
[ 16.748499] ipheth 2-8:4.2: Apple iPhone USB Ethernet device attached
[ 16.749684] usbcore: registered new interface driver ipheth
[ 16.770102] ipheth 2-8:4.2 enp0s16f4u8c4i2: renamed from eth0
[ 18.011983] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
[ 18.013232] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
[ 18.040141] IPv6: ADDRCONF(NETDEV_UP): wlp5s9: link is not ready
[ 18.050578] IPv6: ADDRCONF(NETDEV_UP): wlp5s9: link is not ready
[ 18.066102] IPv6: ADDRCONF(NETDEV_UP): wlp5s9: link is not ready
[ 18.081339] IPv6: ADDRCONF(NETDEV_UP): enp0s16f4u8c4i2: link is not ready
[ 18.082024] IPv6: ADDRCONF(NETDEV_UP): enp0s16f4u8c4i2: link is not ready
[ 18.723270] IPv6: ADDRCONF(NETDEV_UP): wlp5s9: link is not ready
[ 21.994788] IPv6: ADDRCONF(NETDEV_UP): wlp5s9: link is not ready
[ 22.136336] wlp5s9: authenticate with 00:25:15:4a:8c:a4
[ 22.141289] wlp5s9: send auth to 00:25:15:4a:8c:a4 (try 1/3)
[ 22.143339] wlp5s9: authenticated
[ 22.148073] wlp5s9: associate with 00:25:15:4a:8c:a4 (try 1/3)
[ 22.158422] wlp5s9: RX AssocResp from 00:25:15:4a:8c:a4 (capab=0x411 status=0 aid=2)
[ 22.158546] wlp5s9: associated
[ 23.235983] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s9: link becomes ready
[ 879.650958] perf: interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
Comment éviter l'action sur la touche F2 ?
Dernière modification par dz50 (20-04-2019 10:16:12)
Hors ligne
Il vaut mieux montrer que raconter.
Hors ligne
J'y pensais, mais comme la date et l'heure restent à jour ..... Ce serait quand même un hasard si la pile rendait l'âme juste à ce moment, mais pourquoi pas. Existe-t-il un moyen de contrôler cette pile, avant de procéder à son remplacement ?
Hors ligne
Dernière modification par raleur (19-04-2019 15:10:07)
Il vaut mieux montrer que raconter.
Hors ligne
Hors ligne
Hors ligne