logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 29-06-2019 19:26:36

Hiza
Membre
Distrib. : Debian Stretch testing
Noyau : Linux 4.9.0-9-amd64
(G)UI : Cinnamon
Inscription : 29-06-2019

smartctl - compréhension d'une erreur - read-only après quelques jours

Bonjour à tous,

Ne trouvant pas de réponse lors de mes différentes recherches, je me tourne vers la communauté en espérant que vous puissiez m'aider :

Je rencontre depuis quelques temps un problème d'écriture sur mon serveur (Debian Stretch stable).
Au départ tout va bien. Ensuite, après quelques jours (8 jours pour mon dernier cas), j'ai un accès en lecture, mais plus en écriture.

J'ai épluché les logs avec

dmesg | grep "EXT4-fs error"

, j'ai pu voir quelques erreurs :

https://www.dropbox.com/s/g9qs5vh46unmjq8/log.png?dl=0

Je penche donc pour un problème de disque (j'ai 4 disques de 3To en RAID10).

J'ai lancé un test rapide sur mes disques avec la commande

smartctl -t short /dev/sda

, et l'un de mes disques à levé une erreur :

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 1
  CR = Command Register [HEX]
  FR = Features Register [HEX]
  SC = Sector Count Register [HEX]
  SN = Sector Number Register [HEX]
  CL = Cylinder Low Register [HEX]
  CH = Cylinder High Register [HEX]
  DH = Device/Head Register [HEX]
  DC = Device Command Register [HEX]
  ER = Error register [HEX]
  ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 6977 hours (290 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 01 00 00 00 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d5 01 e1 4f c2 00 08      05:20:14.899  SMART READ LOG
  b0 d5 01 e1 4f c2 00 08      05:20:14.899  SMART READ LOG
  b0 d6 01 e0 4f c2 00 08      05:20:14.898  SMART WRITE LOG
  b0 d6 01 e0 4f c2 00 08      05:20:14.897  SMART WRITE LOG
  b0 d5 01 e0 4f c2 00 08      05:20:14.897  SMART READ LOG



C'est ici que je bloque, savez-vous comment interpréter le retour du test ?
A quoi correspond cette erreur ?

Merci d'avance pour votre aide

Hiza

Hors ligne

#2 29-06-2019 19:45:25

raleur
Membre
Inscription : 03-10-2014

Re : smartctl - compréhension d'une erreur - read-only après quelques jours

Pourquoi ne pas avoir copié les logs du noyau en texte brut comme pour smartctl au lieu de poster une image sur un site tiers avec tous les inconvénients que cela entraîne ?

Les logs du noyau parlent de sdf1 alors que smartctl est appliqué à sda, je ne vois pas bien le rapport.
D'autre part je ne vois pas non plus de RAID là-dedans, seulement des partitions et de disques normaux. C'est du RAID matériel ?
Un peu plus d'informations seraient bienvenues.
Les erreurs ext4 ne sortent pas de nulle part, il doit y avoir d'autres messages d'erreur sur les disques et partitions.
smartctl -a sur chaque disque donnerait plus d'informations sur l'état des disques.

Il vaut mieux montrer que raconter.

Hors ligne

#3 29-06-2019 20:44:44

Hiza
Membre
Distrib. : Debian Stretch testing
Noyau : Linux 4.9.0-9-amd64
(G)UI : Cinnamon
Inscription : 29-06-2019

Re : smartctl - compréhension d'une erreur - read-only après quelques jours

Merci pour ta réponse.

En fait il s'agit d'un print screen pris de mon smartphone avant d'avoir forcé un reboot, je n'ai plus les logs maintenant.
J'ai testé mes 4 disques, seul sde1 a levé une erreur. La commande était surtout là pour expliquer comment j'ai procédé, mais c'est bien sur sde que le problème est apparu.
J'ai dit une erreur tout à l'heure, c'est le disque SDE et pas SDF qui a le problème

Non j'utilise MDAM pour mon RAID, c'est vrai que je ne l'ai pas mentionné.
Concernant le RAID, j'ai lancé la commande

mdadm -D /dev/md0

, qui m'a retourné

mdadm -D /dev/md0
/dev/md0:
        Version : 1.2
  Creation Time : Tue Apr 26 21:26:56 2016
     Raid Level : raid10
     Array Size : 5860268032 (5588.79 GiB 6000.91 GB)
  Used Dev Size : 2930134016 (2794.39 GiB 3000.46 GB)
   Raid Devices : 4
  Total Devices : 4
    Persistence : Superblock is persistent

  Intent Bitmap : Internal

    Update Time : Sat Jun 29 21:36:25 2019
          State : clean
 Active Devices : 4
Working Devices : 4
 Failed Devices : 0
  Spare Devices : 0

         Layout : near=2
     Chunk Size : 512K

           Name : diego:0  (local to host diego)
           UUID : 51764d09:ce6ee1e3:0ae08eb4:ead2bc96
         Events : 51418

    Number   Major   Minor   RaidDevice State
       0       8        1        0      active sync set-A   /dev/sda1
       1       8       17        1      active sync set-B   /dev/sdb1
       2       8       33        2      active sync set-A   /dev/sdc1
       3       8       65        3      active sync set-B   /dev/sde1



Je n'ai pas appris grand chose ici.

As-tu d'autres commandes à me conseiller pour chercher ces erreurs ?

Voici le résultat du smartctl -a sur les disques :

SDA

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WCC4N5VRV3X6
LU WWN Device Id: 5 0014ee 262339074
Firmware Version: 82.00A82
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Jun 29 21:39:30 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
          was completed without error.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (  41) The self-test routine was interrupted
          by the host with a hard or soft reset.
Total time to complete Offline
data collection:    (39060) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 392) minutes.
Conveyance self-test routine
recommended polling time:    (   5) minutes.
SCT capabilities:          (0x703d) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   195   180   021    Pre-fail  Always       -       5241
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       66
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   062   062   000    Old_age   Always       -       27784
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       66
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       35
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       935
194 Temperature_Celsius     0x0022   113   112   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short captive       Interrupted (host reset)      90%     27782         -
# 2  Short offline       Completed without error       00%     27766         -
# 3  Short offline       Completed without error       00%     27765         -
# 4  Short offline       Completed without error       00%     27741         -
# 5  Short offline       Completed without error       00%     27717         -
# 6  Short offline       Completed without error       00%     27693         -
# 7  Short offline       Completed without error       00%     27669         -
# 8  Short offline       Completed without error       00%     27645         -
# 9  Extended offline    Completed without error       00%     27629         -
#10  Short offline       Completed without error       00%     27621         -
#11  Short offline       Completed without error       00%     27597         -
#12  Short offline       Completed without error       00%     27573         -
#13  Short offline       Completed without error       00%     27549         -
#14  Short offline       Completed without error       00%     27531         -
#15  Short offline       Completed without error       00%     27525         -
#16  Short offline       Completed without error       00%     27501         -
#17  Short offline       Completed without error       00%     27477         -
#18  Extended offline    Completed without error       00%     27461         -
#19  Short offline       Completed without error       00%     27453         -
#20  Short offline       Completed without error       00%     27429         -
#21  Short offline       Completed without error       00%     27405         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.




SDB

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WCC4N3HS57NF
LU WWN Device Id: 5 0014ee 20cdd0ec3
Firmware Version: 82.00A82
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Jun 29 21:40:37 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
          was suspended by an interrupting command from host.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    (38760) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 389) minutes.
Conveyance self-test routine
recommended polling time:    (   5) minutes.
SCT capabilities:          (0x703d) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   196   182   021    Pre-fail  Always       -       5191
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       66
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   062   062   000    Old_age   Always       -       27783
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       66
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       35
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       931
194 Temperature_Celsius     0x0022   113   112   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     27781         -
# 2  Short offline       Completed without error       00%     27765         -
# 3  Short offline       Completed without error       00%     27764         -
# 4  Short offline       Completed without error       00%     27740         -
# 5  Short offline       Completed without error       00%     27716         -
# 6  Short offline       Completed without error       00%     27692         -
# 7  Short offline       Completed without error       00%     27668         -
# 8  Short offline       Completed without error       00%     27644         -
# 9  Extended offline    Completed without error       00%     27628         -
#10  Short offline       Completed without error       00%     27620         -
#11  Short offline       Completed without error       00%     27596         -
#12  Short offline       Completed without error       00%     27572         -
#13  Short offline       Completed without error       00%     27548         -
#14  Short offline       Completed without error       00%     27530         -
#15  Short offline       Completed without error       00%     27524         -
#16  Short offline       Completed without error       00%     27500         -
#17  Short offline       Completed without error       00%     27476         -
#18  Extended offline    Completed without error       00%     27460         -
#19  Short offline       Completed without error       00%     27452         -
#20  Short offline       Completed without error       00%     27428         -
#21  Short offline       Completed without error       00%     27404         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



SDC

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WCC4N1AKPHXC
LU WWN Device Id: 5 0014ee 20cddfeb9
Firmware Version: 82.00A82
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat Jun 29 21:41:15 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
          was completed without error.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (  41) The self-test routine was interrupted
          by the host with a hard or soft reset.
Total time to complete Offline
data collection:    (40860) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 410) minutes.
Conveyance self-test routine
recommended polling time:    (   5) minutes.
SCT capabilities:          (0x703d) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   193   179   021    Pre-fail  Always       -       5308
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       66
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   062   062   000    Old_age   Always       -       27783
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       66
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       35
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       946
194 Temperature_Celsius     0x0022   113   113   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short captive       Interrupted (host reset)      90%     27781         -
# 2  Short offline       Completed without error       00%     27765         -
# 3  Short offline       Completed without error       00%     27764         -
# 4  Short offline       Completed without error       00%     27740         -
# 5  Short offline       Completed without error       00%     27716         -
# 6  Short offline       Completed without error       00%     27692         -
# 7  Short offline       Completed without error       00%     27668         -
# 8  Short offline       Completed without error       00%     27644         -
# 9  Extended offline    Completed without error       00%     27629         -
#10  Short offline       Completed without error       00%     27620         -
#11  Short offline       Completed without error       00%     27596         -
#12  Short offline       Completed without error       00%     27572         -
#13  Short offline       Completed without error       00%     27548         -
#14  Short offline       Completed without error       00%     27530         -
#15  Short offline       Completed without error       00%     27524         -
#16  Short offline       Completed without error       00%     27500         -
#17  Short offline       Completed without error       00%     27476         -
#18  Extended offline    Completed without error       00%     27461         -
#19  Short offline       Completed without error       00%     27452         -
#20  Short offline       Completed without error       00%     27428         -
#21  Short offline       Completed without error       00%     27404         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



SDE

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WCC4N4TZ3D0J
LU WWN Device Id: 5 0014ee 20cde4156
Firmware Version: 82.00A82
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat Jun 29 21:41:53 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
          was suspended by an interrupting command from host.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    (40980) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 411) minutes.
Conveyance self-test routine
recommended polling time:    (   5) minutes.
SCT capabilities:          (0x703d) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   196   181   021    Pre-fail  Always       -       5191
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       66
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   062   062   000    Old_age   Always       -       27783
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       66
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       34
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       965
194 Temperature_Celsius     0x0022   112   112   000    Old_age   Always       -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 1
  CR = Command Register [HEX]
  FR = Features Register [HEX]
  SC = Sector Count Register [HEX]
  SN = Sector Number Register [HEX]
  CL = Cylinder Low Register [HEX]
  CH = Cylinder High Register [HEX]
  DH = Device/Head Register [HEX]
  DC = Device Command Register [HEX]
  ER = Error register [HEX]
  ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 6977 hours (290 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 01 00 00 00 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d5 01 e1 4f c2 00 08      05:20:14.899  SMART READ LOG
  b0 d5 01 e1 4f c2 00 08      05:20:14.899  SMART READ LOG
  b0 d6 01 e0 4f c2 00 08      05:20:14.898  SMART WRITE LOG
  b0 d6 01 e0 4f c2 00 08      05:20:14.897  SMART WRITE LOG
  b0 d5 01 e0 4f c2 00 08      05:20:14.897  SMART READ LOG

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     27781         -
# 2  Short offline       Completed without error       00%     27765         -
# 3  Short offline       Completed without error       00%     27764         -
# 4  Short offline       Completed without error       00%     27740         -
# 5  Short offline       Completed without error       00%     27716         -
# 6  Short offline       Completed without error       00%     27692         -
# 7  Short offline       Completed without error       00%     27668         -
# 8  Short offline       Completed without error       00%     27644         -
# 9  Extended offline    Completed without error       00%     27629         -
#10  Short offline       Completed without error       00%     27620         -
#11  Short offline       Completed without error       00%     27596         -
#12  Short offline       Completed without error       00%     27572         -
#13  Short offline       Completed without error       00%     27548         -
#14  Short offline       Completed without error       00%     27530         -
#15  Short offline       Completed without error       00%     27524         -
#16  Short offline       Completed without error       00%     27500         -
#17  Short offline       Completed without error       00%     27476         -
#18  Extended offline    Completed without error       00%     27461         -
#19  Short offline       Completed without error       00%     27452         -
#20  Short offline       Completed without error       00%     27428         -
#21  Short offline       Completed without error       00%     27404         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#4 29-06-2019 21:09:23

raleur
Membre
Inscription : 03-10-2014

Re : smartctl - compréhension d'une erreur - read-only après quelques jours

Hiza a écrit :

J'ai dit une erreur tout à l'heure, c'est le disque SDE et pas SDF qui a le problème


Tu n'as rien dit concernant sdf, ce sont les logs du noyau sur ta capture d'écran qui contiennent des erreurs ext4 sur sdf (qui ne fait pas partie du RAID).
L'erreur SMART sur sde ne concerne que les logs d'erreur eux-mêmes, rien de grave à mon avis. Aucun secteur défectueux détecté.

Hiza a écrit :

As-tu d'autres commandes à me conseiller pour chercher ces erreurs ?


Examine les logs du noyau sans te limiter au motif "ext4" et passe smartctl sur tous les autres disques.


Il vaut mieux montrer que raconter.

Hors ligne

Pied de page des forums