Bonjour j'essaie de réinstaller un système d'exploitation linux sur un SSD mais ça bloque :
System: Host: mx1 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: lang=fr_FR quiet splasht
Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-19_x64 patito feo October 21 2019 base: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: ASUSTeK product: K70IO v: 1.0 serial: <filter> Chassis: type: 10
serial: <filter>
Mobo: ASUSTeK model: K70IO v: 1.0 serial: <filter> BIOS: American Megatrends v: 208
date: 06/22/2009
CPU: Topology: Dual Core model: Intel Core2 Duo T6570 bits: 64 type: MCP arch: Penryn
family: 6 model-id: 17 (23) stepping: A (10) microcode: A0B L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 8399
Speed: 2100 MHz min/max: 1200/2100 MHz Core speeds (MHz): 1: 2100 2: 2100
Vulnerabilities: Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Graphics: Device-1: NVIDIA G96M [GeForce GT 120M] vendor: ASUSTeK G96CM driver: nouveau
v: kernel bus ID: 02:00.0 chip ID: 10de:0653
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1600x900~60Hz
OpenGL: renderer: NV96 v: 3.3 Mesa 18.3.6 direct render: Yes
Audio: Device-1: NVIDIA MCP79 High Definition Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 00:08.0 chip ID: 10de:0ac0
Sound Server: ALSA v: k4.19.0-6-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK U6V/U31J laptop driver: r8169 v: kernel port: e800 bus ID: 03:00.0
chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Qualcomm Atheros AR9285 Wireless Network Adapter
vendor: AzureWave AW-NE785 / AW-NE785H 802.11bgn driver: ath9k v: kernel port: e800
bus ID: 04:00.0 chip ID: 168c:002b
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 148.56 GiB used: 603.8 MiB (0.4%)
ID-1: /dev/sda vendor: A-Data model: SU800 size: 119.24 GiB block size:
physical: 4096 B logical: 512 B speed: 1.5 Gb/s serial: <filter> rev: 1C scheme: MBR
ID-2: /dev/sdb type: USB vendor: Kingston model: DataTraveler 3.0 size: 29.31 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR
Partition: ID-1: / raw size: N/A size: 3.04 GiB used: 603.8 MiB (19.4%) fs: overlay
source: ERR-102
Sensors: System Temperatures: cpu: 66.0 C mobo: N/A gpu: nouveau temp: 72 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/buster buster main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian buster main contrib non-free
2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 206 Uptime: 3h 04m Memory: 3.85 GiB used: 1.48 GiB (38.4%) Init: SysVinit
v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3
running in: quick-system-in inxi: 3.0.36
En partant de l'installation:
J'ai un premier message smartcontrol
https://debian-facile.org/images/file-R … d2f5b59b51
Puis un deuxième :
https://debian-facile.org/images/file-R … de1cbae4f7
Je vais jeter un coup d'oeil à gparted:
https://debian-facile.org/images/file-R … b37ad5e150
https://debian-facile.org/images/file-R … 95788d7d92
https://debian-facile.org/images/file-R … 71714418b7
J'ai tenté aussi
fstrim: /dev/sda: not a directory
le wiki de smartmontool https://www.smartmontools.org/wiki/BadBlockHowto est trop dur pour moi à comprendre :
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-6-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SU800
Serial Number: 2G4620101735
LU WWN Device Id: 5 707c18 1003d5c6e
Firmware Version: P0801C
User Capacity: 128035676160 bytes [128 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Wed Mar 25 15:13:21 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 25
9 Power_On_Hours ------ 100 100 000 - 861
12 Power_Cycle_Count ------ 100 100 000 - 1558
160 Unknown_Attribute ------ 100 100 000 - 0
161 Unknown_Attribute ------ 100 100 000 - 27
163 Unknown_Attribute ------ 100 100 000 - 15
164 Unknown_Attribute ------ 100 100 000 - 47496
165 Unknown_Attribute ------ 100 100 000 - 157
166 Unknown_Attribute ------ 100 100 000 - 56
167 Unknown_Attribute ------ 100 100 000 - 96
148 Unknown_Attribute ------ 100 100 000 - 67210
149 Unknown_Attribute ------ 100 100 000 - 2432
150 Unknown_Attribute ------ 100 100 000 - 2315
151 Unknown_Attribute ------ 100 100 000 - 2400
169 Unknown_Attribute ------ 100 100 000 - 100
177 Wear_Leveling_Count ------ 100 100 050 - 138
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 119
194 Temperature_Celsius ------ 100 100 000 - 46
196 Reallocated_Event_Count ------ 100 100 016 - 36
199 UDMA_CRC_Error_Count ------ 100 100 050 - 17344
232 Available_Reservd_Space ------ 100 100 000 - 81
241 Total_LBAs_Written ------ 100 100 000 - 126198
242 Total_LBAs_Read ------ 100 100 000 - 258750
245 Unknown_Attribute ------ 100 100 000 - 379968
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 88 Current Device Internal Status Data log
0x25 GPL R/O 128 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 0 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
6 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: 32/47 Celsius
Lifetime Min/Max Temperature: 0/47 Celsius
Under/Over Temperature Limit Count: 0/0
Read SCT Status failed: scsi error aborted command
Read SCT Temperature History failed
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 1558 --- Lifetime Power-On Resets
0x01 0x010 4 861 --- Power-on Hours
0x01 0x018 6 3975567316 --- Logical Sectors Written
0x01 0x020 6 100129884 --- Number of Write Commands
0x01 0x028 6 4072541660 --- Logical Sectors Read
0x01 0x030 6 217428703 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 36 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 577 --- Resets Between Cmd Acceptance and Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 20329 --- Number of Hardware Resets
0x06 0x018 4 4597 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 6 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 4597 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2596 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
root@mx1:/home/demo#
dd if=/dev/zero of=/dev/sda
dd: écriture vers '/dev/sda': Erreur d'entrée/sortie
97673+0 enregistrements lus
97672+0 enregistrements écrits
50008064 octets (50 MB, 48 MiB) copiés, 43,3622 s, 1,2 MB/s
root@mx1:/home/demo#
Que dois je faire pour installer un système malgré tout ?
Un gros merci d'avance !!
Nico
Dernière modification par calixtus06 (09-09-2020 08:03:46)
Il n'y a pas de mauvaises questions...
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
