[Résolu] xorg à 40% au repos

GeHoin · 12-01-2021 18:15:51

Bonjour,

Je viens de recevoir un nouveau ssd. J'y ai donc réinstaller Debian unstable netinstall mini + xfce.

J'ai également installé le pilote xserver-xorg-video-nouveau.

Je remarque via le gestionnaire de tâches que mon cpu est utilisé à environ 52% dont 40% par xorg.

Voici le processus : "Xorg -nolisten tcp -auth /var/run/slim.auth"

Pensant que c'était un problème avec le pilote nouveau, j'ai installé le pilote nvidia legacy 390.
Le résultat est que maintenant la consommation est monté à 60% !

Avec en théorie la même installation/config qu'avec mon ancien disque dur, je ne comprends pas pourquoi une telle utilisation.

Je ne sais pas si c'est lié mais les menu dans Chromium sont lent.

Merci de l'aide que vous pourrez m'apporter.

Dernière modification par GeHoin (16-01-2021 16:19:13)

Beta-Pictoris · 12-01-2021 20:03:41

Peux-tu donner les références de ta machine (fabricant, nom, product number,...) ?

GeHoin · 13-01-2021 16:48:54

Bonjour,

Il s'agit d'un vieux ordinateur que j'ai assemblé il y a 12 ans.
J'ai changé de carte graphique il y a 3/4 ans.

Carte mère : Asus P5Q

Carte graphique :

lspci | egrep "3D|VGA"
01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1)

Processeur : Intel E8400

lscpu
Architecture : x86_64
Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit
Boutisme : Little Endian
Tailles des adresses: 36 bits physical, 48 bits virtual
Processeur(s) : 2
Liste de processeur(s) en ligne : 0,1
Thread(s) par cœur : 1
Cœur(s) par socket : 2
Socket(s) : 1
Nœud(s) NUMA : 1
Identifiant constructeur : GenuineIntel
Famille de processeur : 6
Modèle : 23
Nom de modèle : Intel(R) Core(TM)2 Duo CPU E8400 @
3.00GHz
Révision : 10
Vitesse du processeur en MHz : 2999.701
Vitesse maximale du processeur en MHz : 3003,0000
Vitesse minimale du processeur en MHz : 2003,0000
BogoMIPS : 5999.40
Virtualisation : VT-x
Cache L1d : 64 KiB
Cache L1i : 64 KiB
Cache L2 : 6 MiB
Nœud NUMA 0 de processeur(s) : 0,1
Vulnerability Itlb multihit: KVM: Mitigation: VMX disabled
Vulnerability L1tf: Mitigation; PTE Inversion; VMX EPT disab
led
Vulnerability Mds: Vulnerable: Clear CPU buffers attempted,
no microcode; SMT disabled
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and
__user pointer sanitization
Vulnerability Spectre v2: Mitigation; Full generic retpoline, STIB
P disabled, RSB filling
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
Drapeaux : fpu vme de pse tsc msr pae mce cx8 apic
sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ht tm pbe sys
call nx lm constant_tsc arch_perfmon peb
s bts rep_good nopl cpuid aperfmperf pni
dtes64 monitor ds_cpl vmx smx est tm2 s
sse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm
pti tpr_shadow vnmi flexpriority vpid d
therm

Le contenu de mon xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 455.45.01

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

dmesg | grep DMI

[ 0.000000] DMI: System manufacturer P5Q/P5Q, BIOS 1004 07/10/2008
[ 0.400697] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 4.017725] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 4.017843] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11

Beta-Pictoris · 13-01-2021 17:01:10

Que donne ?

glxinfo  | grep -i rendering

GeHoin · 13-01-2021 17:06:29

Ça me répond : commande introuvable

$ glxinfo | grep -i rendering
bash: glxinfo : commande introuvable

Peut-être le paquet "libva-glx2" à installer ?

Beta-Pictoris · 13-01-2021 17:11:25

La commande est dans le paquet "mesa-utils".

GeHoin · 13-01-2021 17:15:46

Merci, après installation :

glxinfo | grep -i rendering
direct rendering: Yes
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_packed_float_linear, GL_NV_path_rendering,

Beta-Pictoris · 13-01-2021 17:36:10

Que donne ?

nvidia-detect

GeHoin · 13-01-2021 17:42:46

Voici :

nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1)

Checking card: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1)
Your card is only supported up to the 390 legacy drivers series.
It is recommended to install the
nvidia-legacy-390xx-driver
package.

Et mon /var/log/Xorg.0.log

[     4.709] 

X.Org X Server 1.20.10

X Protocol Version 11, Revision 0

[     4.709] Build Operating System: Linux 4.19.0-13-amd64 x86_64 Debian

[     4.709] Current Operating System: Linux debiansid 5.10.0-1-amd64 #1 SMP Debian 5.10.5-1 (2021-01-09) x86_64

[     4.709] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-1-amd64 root=UUID=b33b1fbe-f042-447f-8efd-63c7433c16af ro quiet

[     4.709] Build Date: 06 January 2021  09:33:33AM

[     4.709] xorg-server 2:1.20.10-2 (https://www.debian.org/support) 

[     4.709] Current version of pixman: 0.40.0

[     4.709]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[     4.709] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[     4.709] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 13 16:26:07 2021

[     4.712] (==) Using config file: "/etc/X11/xorg.conf"

[     4.712] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[     4.713] (==) ServerLayout "Layout0"

[     4.713] (**) |-->Screen "Screen0" (0)

[     4.713] (**) |   |-->Monitor "Monitor0"

[     4.714] (**) |   |-->Device "Device0"

[     4.714] (**) |-->Input Device "Keyboard0"

[     4.714] (**) |-->Input Device "Mouse0"

[     4.714] (==) Automatically adding devices

[     4.714] (==) Automatically enabling devices

[     4.714] (==) Automatically adding GPU devices

[     4.714] (==) Max clients allowed: 256, resource mask: 0x1fffff

[     4.717] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[     4.717]  Entry deleted from font path.

[     4.719] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[     4.719] (==) ModulePath set to "/usr/lib/xorg/modules"

[     4.719] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.

[     4.719] (WW) Disabling Keyboard0

[     4.719] (WW) Disabling Mouse0

[     4.719] (II) Loader magic: 0x55fe6ae38e40

[     4.719] (II) Module ABI versions:

[     4.719]  X.Org ANSI C Emulation: 0.4

[     4.719]  X.Org Video Driver: 24.1

[     4.719]  X.Org XInput driver : 24.1

[     4.719]  X.Org Server Extension : 10.0

[     4.720] (--) using VT number 2

[     4.720] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[     4.720] (II) xfree86: Adding drm device (/dev/dri/card0)

[     4.724] (--) PCI:*(1@0:0:0) 10de:104a:1458:3611 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072

[     4.724] (II) LoadModule: "glx"

[     4.726] (II) Loading /usr/lib/xorg/modules/linux/libglx.so

[     4.838] (II) Module glx: vendor="NVIDIA Corporation"

[     4.838]  compiled for 4.0.2, module version = 1.0.0

[     4.838]  Module class: X.Org Server Extension

[     4.839] (II) NVIDIA GLX Module  390.141  Mon Dec 28 16:17:40 UTC 2020

[     4.840] (II) LoadModule: "nvidia"

[     4.840] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so

[     4.851] (II) Module nvidia: vendor="NVIDIA Corporation"

[     4.851]  compiled for 4.0.2, module version = 1.0.0

[     4.851]  Module class: X.Org Video Driver

[     4.853] (II) NVIDIA dlloader X Driver  390.141  Mon Dec 28 16:20:32 UTC 2020

[     4.853] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[     4.859] (II) Loading sub module "fb"

[     4.859] (II) LoadModule: "fb"

[     4.859] (II) Loading /usr/lib/xorg/modules/libfb.so

[     4.862] (II) Module fb: vendor="X.Org Foundation"

[     4.862]  compiled for 1.20.10, module version = 1.0.0

[     4.862]  ABI class: X.Org ANSI C Emulation, version 0.4

[     4.862] (II) Loading sub module "wfb"

[     4.862] (II) LoadModule: "wfb"

[     4.862] (II) Loading /usr/lib/xorg/modules/libwfb.so

[     4.864] (II) Module wfb: vendor="X.Org Foundation"

[     4.865]  compiled for 1.20.10, module version = 1.0.0

[     4.865]  ABI class: X.Org ANSI C Emulation, version 0.4

[     4.865] (II) Loading sub module "ramdac"

[     4.865] (II) LoadModule: "ramdac"

[     4.865] (II) Module "ramdac" already built-in

[     4.867] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32

[     4.868] (==) NVIDIA(0): RGB weight 888

[     4.868] (==) NVIDIA(0): Default visual is TrueColor

[     4.868] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)

[     4.868] (**) NVIDIA(0): Enabling 2D acceleration

[     5.705] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0

[     5.705] (--) NVIDIA(0):     CRT-0

[     5.705] (--) NVIDIA(0):     CRT-1

[     5.705] (--) NVIDIA(0):     DFP-0 (boot)

[     5.705] (--) NVIDIA(0):     DFP-1

[     5.706] (II) NVIDIA(0): NVIDIA GPU GeForce GT 610 (GF119) at PCI:1:0:0 (GPU-0)

[     5.706] (--) NVIDIA(0): Memory: 1048576 kBytes

[     5.706] (--) NVIDIA(0): VideoBIOS: 75.19.56.00.04

[     5.706] (II) NVIDIA(0): Detected PCI Express Link width: 16X

[     5.713] (--) NVIDIA(GPU-0): CRT-0: disconnected

[     5.713] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock

[     5.713] (--) NVIDIA(GPU-0): 

[     5.714] (--) NVIDIA(GPU-0): CRT-1: disconnected

[     5.714] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock

[     5.714] (--) NVIDIA(GPU-0): 

[     5.727] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected

[     5.727] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS

[     5.727] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock

[     5.727] (--) NVIDIA(GPU-0): 

[     5.728] (--) NVIDIA(GPU-0): DFP-1: disconnected

[     5.728] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS

[     5.728] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock

[     5.728] (--) NVIDIA(GPU-0): 

[     5.731] (==) NVIDIA(0): 

[     5.731] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"

[     5.731] (==) NVIDIA(0):     will be used as the requested mode.

[     5.731] (==) NVIDIA(0): 

[     5.732] (II) NVIDIA(0): Validated MetaModes:

[     5.732] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"

[     5.732] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050

[     5.736] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config

[     5.736] (--) NVIDIA(0):     option

[     5.736] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory

[     5.736] (II) NVIDIA:     access.

[     5.738] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon

[     5.738] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X

[     5.738] (II) NVIDIA(0):     configuration option may not be set correctly.  When the

[     5.738] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will

[     5.738] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For

[     5.738] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and

[     5.738] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X

[     5.738] (II) NVIDIA(0):     Config Options in the README.

[     5.760] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"

[     5.814] (==) NVIDIA(0): Disabling shared memory pixmaps

[     5.814] (==) NVIDIA(0): Backing store enabled

[     5.814] (==) NVIDIA(0): Silken mouse enabled

[     5.815] (**) NVIDIA(0): DPMS enabled

[     5.816] (II) Loading sub module "dri2"

[     5.816] (II) LoadModule: "dri2"

[     5.816] (II) Module "dri2" already built-in

[     5.816] (II) NVIDIA(0): [DRI2] Setup complete

[     5.816] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia

[     5.817] (II) Initializing extension Generic Event Extension

[     5.817] (II) Initializing extension SHAPE

[     5.817] (II) Initializing extension MIT-SHM

[     5.817] (II) Initializing extension XInputExtension

[     5.818] (II) Initializing extension XTEST

[     5.818] (II) Initializing extension BIG-REQUESTS

[     5.818] (II) Initializing extension SYNC

[     5.818] (II) Initializing extension XKEYBOARD

[     5.818] (II) Initializing extension XC-MISC

[     5.818] (II) Initializing extension SECURITY

[     5.819] (II) Initializing extension XFIXES

[     5.819] (II) Initializing extension RENDER

[     5.819] (II) Initializing extension RANDR

[     5.819] (II) Initializing extension COMPOSITE

[     5.819] (II) Initializing extension DAMAGE

[     5.819] (II) Initializing extension MIT-SCREEN-SAVER

[     5.819] (II) Initializing extension DOUBLE-BUFFER

[     5.820] (II) Initializing extension RECORD

[     5.820] (II) Initializing extension DPMS

[     5.820] (II) Initializing extension Present

[     5.820] (II) Initializing extension DRI3

[     5.820] (II) Initializing extension X-Resource

[     5.820] (II) Initializing extension XVideo

[     5.820] (II) Initializing extension XVideo-MotionCompensation

[     5.820] (II) Initializing extension SELinux

[     5.820] (II) SELinux: Disabled on system

[     5.820] (II) Initializing extension XFree86-VidModeExtension

[     5.820] (II) Initializing extension XFree86-DGA

[     5.820] (II) Initializing extension XFree86-DRI

[     5.821] (II) Initializing extension DRI2

[     5.821] (II) Initializing extension GLX

[     5.821] (II) Initializing extension GLX

[     5.821] (II) Indirect GLX disabled.

[     5.821] (II) Initializing extension NV-GLX

[     5.821] (II) Initializing extension NV-CONTROL

[     5.821] (II) Initializing extension XINERAMA

[     5.911] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[     5.911] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[     5.911] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[     5.911] (II) LoadModule: "libinput"

[     5.911] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[     5.920] (II) Module libinput: vendor="X.Org Foundation"

[     5.920]  compiled for 1.20.8, module version = 0.30.0

[     5.920]  Module class: X.Org XInput Driver

[     5.920]  ABI class: X.Org XInput driver, version 24.1

[     5.920] (II) Using input driver 'libinput' for 'Power Button'

[     5.920] (**) Power Button: always reports core events

[     5.920] (**) Option "Device" "/dev/input/event5"

[     5.921] (**) Option "_source" "server/udev"

[     5.928] (II) event5  - Power Button: is tagged by udev as: Keyboard

[     5.928] (II) event5  - Power Button: device is a keyboard

[     5.928] (II) event5  - Power Button: device removed

[     5.958] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5"

[     5.958] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[     5.958] (**) Option "xkb_model" "pc105"

[     5.958] (**) Option "xkb_layout" "fr"

[     5.958] (**) Option "xkb_variant" "latin9"

[     5.981] (II) event5  - Power Button: is tagged by udev as: Keyboard

[     5.981] (II) event5  - Power Button: device is a keyboard

[     5.982] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[     5.982] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[     5.982] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[     5.982] (II) Using input driver 'libinput' for 'Power Button'

[     5.982] (**) Power Button: always reports core events

[     5.982] (**) Option "Device" "/dev/input/event4"

[     5.982] (**) Option "_source" "server/udev"

[     5.983] (II) event4  - Power Button: is tagged by udev as: Keyboard

[     5.983] (II) event4  - Power Button: device is a keyboard

[     5.984] (II) event4  - Power Button: device removed

[     6.014] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4"

[     6.014] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[     6.014] (**) Option "xkb_model" "pc105"

[     6.014] (**) Option "xkb_layout" "fr"

[     6.014] (**) Option "xkb_variant" "latin9"

[     6.016] (II) event4  - Power Button: is tagged by udev as: Keyboard

[     6.016] (II) event4  - Power Button: device is a keyboard

[     6.017] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)

[     6.017] (II) No input driver specified, ignoring this device.

[     6.017] (II) This device may have been added with another device file.

[     6.017] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)

[     6.017] (II) No input driver specified, ignoring this device.

[     6.017] (II) This device may have been added with another device file.

[     6.018] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event0)

[     6.018] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"

[     6.018] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"

[     6.018] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'

[     6.018] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events

[     6.018] (**) Option "Device" "/dev/input/event0"

[     6.018] (**) Option "_source" "server/udev"

[     6.076] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse

[     6.076] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: device is a pointer

[     6.077] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: device removed

[     6.106] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb4/4-1/4-1:1.0/0003:062A:4102.0001/input/input3/event0"

[     6.106] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 8)

[     6.107] (**) Option "AccelerationScheme" "none"

[     6.107] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0

[     6.107] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000

[     6.107] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4

[     6.169] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse

[     6.169] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: device is a pointer

[     6.171] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)

[     6.171] (II) No input driver specified, ignoring this device.

[     6.171] (II) This device may have been added with another device file.

[     6.172] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event1)

[     6.172] (II) No input driver specified, ignoring this device.

[     6.172] (II) This device may have been added with another device file.

[     6.172] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)

[     6.172] (II) No input driver specified, ignoring this device.

[     6.172] (II) This device may have been added with another device file.

[     6.173] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10)

[     6.173] (II) No input driver specified, ignoring this device.

[     6.173] (II) This device may have been added with another device file.

[     6.174] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event11)

[     6.174] (II) No input driver specified, ignoring this device.

[     6.174] (II) This device may have been added with another device file.

[     6.174] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12)

[     6.174] (II) No input driver specified, ignoring this device.

[     6.174] (II) This device may have been added with another device file.

[     6.175] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event13)

[     6.175] (II) No input driver specified, ignoring this device.

[     6.175] (II) This device may have been added with another device file.

[     6.176] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event14)

[     6.176] (II) No input driver specified, ignoring this device.

[     6.176] (II) This device may have been added with another device file.

[     6.176] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event15)

[     6.176] (II) No input driver specified, ignoring this device.

[     6.176] (II) This device may have been added with another device file.

[     6.177] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event16)

[     6.177] (II) No input driver specified, ignoring this device.

[     6.177] (II) This device may have been added with another device file.

[     6.178] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event17)

[     6.178] (II) No input driver specified, ignoring this device.

[     6.178] (II) This device may have been added with another device file.

[     6.179] (II) config/udev: Adding input device MLK Trust Deskset 15207 (/dev/input/event2)

[     6.179] (**) MLK Trust Deskset 15207: Applying InputClass "evdev keyboard catchall"

[     6.179] (**) MLK Trust Deskset 15207: Applying InputClass "libinput keyboard catchall"

[     6.179] (II) Using input driver 'libinput' for 'MLK Trust Deskset 15207'

[     6.179] (**) MLK Trust Deskset 15207: always reports core events

[     6.179] (**) Option "Device" "/dev/input/event2"

[     6.179] (**) Option "_source" "server/udev"

[     6.182] (II) event2  - MLK Trust Deskset 15207: is tagged by udev as: Keyboard

[     6.182] (II) event2  - MLK Trust Deskset 15207: device is a keyboard

[     6.183] (II) event2  - MLK Trust Deskset 15207: device removed

[     6.214] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:04FC:05D8.0002/input/input5/event2"

[     6.214] (II) XINPUT: Adding extended input device "MLK Trust Deskset 15207" (type: KEYBOARD, id 9)

[     6.214] (**) Option "xkb_model" "pc105"

[     6.214] (**) Option "xkb_layout" "fr"

[     6.214] (**) Option "xkb_variant" "latin9"

[     6.217] (II) event2  - MLK Trust Deskset 15207: is tagged by udev as: Keyboard

[     6.218] (II) event2  - MLK Trust Deskset 15207: device is a keyboard

[     6.219] (II) config/udev: Adding input device MLK Trust Deskset 15207 (/dev/input/event3)

[     6.219] (**) MLK Trust Deskset 15207: Applying InputClass "evdev pointer catchall"

[     6.219] (**) MLK Trust Deskset 15207: Applying InputClass "evdev keyboard catchall"

[     6.219] (**) MLK Trust Deskset 15207: Applying InputClass "libinput pointer catchall"

[     6.219] (**) MLK Trust Deskset 15207: Applying InputClass "libinput keyboard catchall"

[     6.219] (II) Using input driver 'libinput' for 'MLK Trust Deskset 15207'

[     6.219] (**) MLK Trust Deskset 15207: always reports core events

[     6.219] (**) Option "Device" "/dev/input/event3"

[     6.219] (**) Option "_source" "server/udev"

[     6.222] (II) event3  - MLK Trust Deskset 15207: is tagged by udev as: Keyboard Mouse

[     6.223] (II) event3  - MLK Trust Deskset 15207: device is a pointer

[     6.223] (II) event3  - MLK Trust Deskset 15207: device is a keyboard

[     6.223] (II) event3  - MLK Trust Deskset 15207: device removed

[     6.242] (II) libinput: MLK Trust Deskset 15207: needs a virtual subdevice

[     6.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:04FC:05D8.0003/input/input6/event3"

[     6.242] (II) XINPUT: Adding extended input device "MLK Trust Deskset 15207" (type: MOUSE, id 10)

[     6.243] (**) Option "AccelerationScheme" "none"

[     6.243] (**) MLK Trust Deskset 15207: (accel) selected scheme none/0

[     6.243] (**) MLK Trust Deskset 15207: (accel) acceleration factor: 2.000

[     6.243] (**) MLK Trust Deskset 15207: (accel) acceleration threshold: 4

[     6.246] (II) event3  - MLK Trust Deskset 15207: is tagged by udev as: Keyboard Mouse

[     6.246] (II) event3  - MLK Trust Deskset 15207: device is a pointer

[     6.246] (II) event3  - MLK Trust Deskset 15207: device is a keyboard

[     6.247] (II) config/udev: Adding input device MLK Trust Deskset 15207 (/dev/input/mouse1)

[     6.247] (II) No input driver specified, ignoring this device.

[     6.247] (II) This device may have been added with another device file.

[     6.248] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)

[     6.248] (II) No input driver specified, ignoring this device.

[     6.248] (II) This device may have been added with another device file.

[     6.256] (**) MLK Trust Deskset 15207: Applying InputClass "evdev pointer catchall"

[     6.256] (**) MLK Trust Deskset 15207: Applying InputClass "evdev keyboard catchall"

[     6.256] (**) MLK Trust Deskset 15207: Applying InputClass "libinput pointer catchall"

[     6.256] (**) MLK Trust Deskset 15207: Applying InputClass "libinput keyboard catchall"

[     6.256] (II) Using input driver 'libinput' for 'MLK Trust Deskset 15207'

[     6.256] (**) MLK Trust Deskset 15207: always reports core events

[     6.256] (**) Option "Device" "/dev/input/event3"

[     6.256] (**) Option "_source" "_driver/libinput"

[     6.256] (II) libinput: MLK Trust Deskset 15207: is a virtual subdevice

[     6.256] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:04FC:05D8.0003/input/input6/event3"

[     6.256] (II) XINPUT: Adding extended input device "MLK Trust Deskset 15207" (type: KEYBOARD, id 11)

[     6.256] (**) Option "xkb_model" "pc105"

[     6.256] (**) Option "xkb_layout" "fr"

[     6.256] (**) Option "xkb_variant" "latin9"

[    48.184] (--) NVIDIA(GPU-0): CRT-0: disconnected

[    48.184] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock

[    48.184] (--) NVIDIA(GPU-0): 

[    48.185] (--) NVIDIA(GPU-0): CRT-1: disconnected

[    48.185] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock

[    48.185] (--) NVIDIA(GPU-0): 

[    48.199] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected

[    48.199] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS

[    48.199] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock

[    48.199] (--) NVIDIA(GPU-0): 

[    48.199] (--) NVIDIA(GPU-0): DFP-1: disconnected

[    48.199] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS

[    48.199] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock

[    48.199] (--) NVIDIA(GPU-0): 

[    67.429] (II) config/udev: removing device MOSART Semi. 2.4G Wireless Mouse

[    67.429] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: device removed

[    67.446] (II) UnloadModule: "libinput"

[    86.936] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)

[    86.936] (II) No input driver specified, ignoring this device.

[    86.936] (II) This device may have been added with another device file.

[    87.031] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event0)

[    87.031] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"

[    87.031] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"

[    87.031] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'

[    87.031] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events

[    87.031] (**) Option "Device" "/dev/input/event0"

[    87.031] (**) Option "_source" "server/udev"

[    87.092] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse

[    87.092] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: device is a pointer

[    87.093] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: device removed

[    87.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb4/4-1/4-1:1.0/0003:062A:4102.0004/input/input21/event0"

[    87.126] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 8)

[    87.127] (**) Option "AccelerationScheme" "none"

[    87.128] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0

[    87.128] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000

[    87.128] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4

[    87.189] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse

[    87.189] (II) event0  - MOSART Semi. 2.4G Wireless Mouse: device is a pointer

[    87.191] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event1)

[    87.191] (II) No input driver specified, ignoring this device.

[    87.191] (II) This device may have been added with another device file.

[  1201.767] (EE) event2  - MLK Trust Deskset 15207: client bug: event processing lagging behind by 16ms, your system is too slow

Beta-Pictoris · 13-01-2021 18:02:10

Tu peux essayer avec un autre clavier et souris usb pour voir si c'est plus réactif ?

Débranche aussi tous les autres périphériques usb.

GeHoin · 13-01-2021 18:14:04

Malheureusement je n'ai pas d'autre clavier/souris.

À la base j'ai un ensemble clavier+souris de la marque Trust sur une même "clé usb".

La souris a rendu l'âme et j'en ai donc acheté une autre qui fonctionne sur une autre "clé usb".

J'ai donc 2 "clés usb".

Peut-être que xorg détecte un conflit avec la souris manquante ?

GeHoin · 13-01-2021 18:29:23

J'obtiens une erreur avec :

$ vainfo
libva info: VA-API version 1.10.0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/nvidia_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit

Beta-Pictoris · 13-01-2021 18:32:00

Lance un "htop", puis branche soit la souris, soit le clavier pour voir si ça va plus vite.

Regarde aussi si tous les firmwares sont bien installés :

journalctl -b | grep -i firmware

Beta-Pictoris · 13-01-2021 18:39:05

Que donne ? :

apt list vdpau\*

GeHoin · 13-01-2021 18:41:37

La première commande reste sans réponse...

Et la deuxième :

$ apt list vdpau\*
En train de lister... Fait
vdpau-driver-all/unstable 1.4-3 amd64
vdpauinfo/unstable 1.4-2 amd64

Beta-Pictoris · 13-01-2021 18:45:40

Tu peux toujours installer le paquet "vdpau-driver-all" et relancer un "vainfo" pour voir.

GeHoin · 13-01-2021 18:58:49

Ça ne change rien

Merci beaucoup pour ton aide, même si je ne vois pas de solution. Peut-être une réinstall ?

$ vdpauinfo

display: :0.0   screen: 0

API version: 1

Information string: NVIDIA VDPAU Driver Shared Library  390.141  Mon Dec 28 16:13:07 UTC 2020

Video surface:

name   width height types

-------------------------------------------

420     4096  4096  NV12 YV12 

422     4096  4096  UYVY YUYV 

Decoder capabilities:

name                        level macbs width height

----------------------------------------------------

MPEG1                           0 65536  4032  4048

MPEG2_SIMPLE                    3 65536  4032  4048

MPEG2_MAIN                      3 65536  4032  4048

H264_BASELINE                  41 65536  4032  4080

H264_MAIN                      41 65536  4032  4080

H264_HIGH                      41 65536  4032  4080

VC1_SIMPLE                      1  8190  2048  2048

VC1_MAIN                        2  8190  2048  2048

VC1_ADVANCED                    4  8190  2048  2048

MPEG4_PART2_SP                  3  8192  2048  2048

MPEG4_PART2_ASP                 5  8192  2048  2048

DIVX4_QMOBILE                   0  8192  2048  2048

DIVX4_MOBILE                    0  8192  2048  2048

DIVX4_HOME_THEATER              0  8192  2048  2048

DIVX4_HD_1080P                  0  8192  2048  2048

DIVX5_QMOBILE                   0  8192  2048  2048

DIVX5_MOBILE                    0  8192  2048  2048

DIVX5_HOME_THEATER              0  8192  2048  2048

DIVX5_HD_1080P                  0  8192  2048  2048

H264_CONSTRAINED_BASELINE      41 65536  4032  4080

H264_EXTENDED                  41 65536  4032  4080

H264_PROGRESSIVE_HIGH          41 65536  4032  4080

H264_CONSTRAINED_HIGH          41 65536  4032  4080

H264_HIGH_444_PREDICTIVE       41 65536  4032  4080

VP9_PROFILE_0                  --- not supported ---

VP9_PROFILE_1                  --- not supported ---

VP9_PROFILE_2                  --- not supported ---

VP9_PROFILE_3                  --- not supported ---

HEVC_MAIN                      --- not supported ---

HEVC_MAIN_10                   --- not supported ---

HEVC_MAIN_STILL                --- not supported ---

HEVC_MAIN_12                   --- not supported ---

HEVC_MAIN_444                  --- not supported ---

HEVC_MAIN_444_10               --- not supported ---

HEVC_MAIN_444_12               --- not supported ---

Output surface:

name              width height nat types

----------------------------------------------------

B8G8R8A8         16384 16384    y  Y8U8V8A8 V8U8Y8A8 A4I4 I4A4 A8I8 I8A8 

R10G10B10A2      16384 16384    y  Y8U8V8A8 V8U8Y8A8 A4I4 I4A4 A8I8 I8A8 

Bitmap surface:

name              width height

------------------------------

B8G8R8A8         16384 16384

R8G8B8A8         16384 16384

R10G10B10A2      16384 16384

B10G10R10A2      16384 16384

A8               16384 16384

Video mixer:

feature name                    sup

------------------------------------

DEINTERLACE_TEMPORAL             y

DEINTERLACE_TEMPORAL_SPATIAL     y

INVERSE_TELECINE                 y

NOISE_REDUCTION                  y

SHARPNESS                        y

LUMA_KEY                         y

HIGH QUALITY SCALING - L1        y

HIGH QUALITY SCALING - L2        -

HIGH QUALITY SCALING - L3        -

HIGH QUALITY SCALING - L4        -

HIGH QUALITY SCALING - L5        -

HIGH QUALITY SCALING - L6        -

HIGH QUALITY SCALING - L7        -

HIGH QUALITY SCALING - L8        -

HIGH QUALITY SCALING - L9        -

parameter name                  sup      min      max

-----------------------------------------------------

VIDEO_SURFACE_WIDTH              y         1     4096

VIDEO_SURFACE_HEIGHT             y         1     4096

CHROMA_TYPE                      y  

LAYERS                           y         0        4

attribute name                  sup      min      max

-----------------------------------------------------

BACKGROUND_COLOR                 y  

CSC_MATRIX                       y  

NOISE_REDUCTION_LEVEL            y      0.00     1.00

SHARPNESS_LEVEL                  y     -1.00     1.00

LUMA_KEY_MIN_LUMA                y  

LUMA_KEY_MAX_LUMA                y

Beta-Pictoris · 13-01-2021 19:16:18

Essaye de booter sur un CD live ubuntu ou fedora pour voir.

GeHoin · 13-01-2021 19:26:18

Ce soir je n'ai plus le temps, j'essaierai demain.

Merci

GeHoin · 14-01-2021 18:52:42

Quelques nouvelles :

J'ai récupéré un nouveau clavier et une souris au travail, le problème est toujours là !

J'ai également booté sur un ancien noyau, même problème...

J'ai réinstallé le pilote "nouveau", mon cpu est redescendu de 10% comparé au nvidia legacy (comme avant).

Si je supprime le fichier /etc/X11/xorg.conf le système en générera un nouveau ou je vais me retrouver avec un écran noir ?

Beta-Pictoris · 14-01-2021 20:26:51

Le pilote nouveau fonctionne quand même mieux avec ces anciennes cartes graphiques.

Tu peux toujours sauvegarder ton fichier xorg.conf avant de le supprimer.

GeHoin · 16-01-2021 10:41:55

Alors j'ai supprimé mon xorg.conf, j'ai redémarré sans problème et pas de nouveau fichier régénéré.

J'ai retrouvé un live cd Debian 7.5 de 2014. Je l'ai essayé, pas de soucis, et je n'ai pas de processus xorg en cours.

J'ai relancé mon ancien disque dur et j'ai pu constater que je n'avais également pas de processus xorg.

La seule différence est mon passage d'un disque à plateaux à un ssd.

Je vais relancer une install minimum (apt-get install -no-install-recommends xfce4 xfce4-taskmanager xorg xserver-video-nouveau) et je vais voir ce que ça donne.

Pour info, lors de l'installation minimale je n'installe pas les utilitaires usuels du system. Mais sur mon ancienne installation je ne les avait pas installé non plus...

GeHoin · 16-01-2021 16:18:25

Après une réinstallation paquet par paquet... j'ai trouvé la solution à mon problème !

C'était simplement le thème GTK3 qui consommait le processeur

J'ai installé un nouveau thème est tout fonctionne normalement, cpu à environ 3/4% au repos.

Et le processus "xorg" n'est plus présent.

Merci beaucoup Beta-Pictoris pour ton aide, j'ai appris de nouvelles choses

Mugen · 16-01-2021 23:33:30

Bonsoir
Juste par curiosité, c'était quoi le nom du thème ?
Installé depuis les dépôts debian ou bien tu es allé le chercher sur un site web ?

GeHoin · 17-01-2021 11:13:26

Il s'agit du thème Aurora Nuevo Blue

https://www.gnome-look.org/p/1283611/

Debian-facile

#1 12-01-2021 18:15:51

[Résolu] xorg à 40% au repos

#2 12-01-2021 20:03:41

Re : [Résolu] xorg à 40% au repos

#3 13-01-2021 16:48:54

Re : [Résolu] xorg à 40% au repos

#4 13-01-2021 17:01:10

Re : [Résolu] xorg à 40% au repos

#5 13-01-2021 17:06:29

Re : [Résolu] xorg à 40% au repos

#6 13-01-2021 17:11:25

Re : [Résolu] xorg à 40% au repos

#7 13-01-2021 17:15:46

Re : [Résolu] xorg à 40% au repos

#8 13-01-2021 17:36:10

Re : [Résolu] xorg à 40% au repos

#9 13-01-2021 17:42:46

Re : [Résolu] xorg à 40% au repos

#10 13-01-2021 18:02:10

Re : [Résolu] xorg à 40% au repos

#11 13-01-2021 18:14:04

Re : [Résolu] xorg à 40% au repos

#12 13-01-2021 18:29:23

Re : [Résolu] xorg à 40% au repos

#13 13-01-2021 18:32:00

Re : [Résolu] xorg à 40% au repos

#14 13-01-2021 18:39:05

Re : [Résolu] xorg à 40% au repos

#15 13-01-2021 18:41:37

Re : [Résolu] xorg à 40% au repos

#16 13-01-2021 18:45:40

Re : [Résolu] xorg à 40% au repos

#17 13-01-2021 18:58:49

Re : [Résolu] xorg à 40% au repos

#18 13-01-2021 19:16:18

Re : [Résolu] xorg à 40% au repos

#19 13-01-2021 19:26:18

Re : [Résolu] xorg à 40% au repos

#20 14-01-2021 18:52:42

Re : [Résolu] xorg à 40% au repos

#21 14-01-2021 20:26:51

Re : [Résolu] xorg à 40% au repos

#22 16-01-2021 10:41:55

Re : [Résolu] xorg à 40% au repos

#23 16-01-2021 16:18:25

Re : [Résolu] xorg à 40% au repos

#24 16-01-2021 23:33:30

Re : [Résolu] xorg à 40% au repos

#25 17-01-2021 11:13:26

Re : [Résolu] xorg à 40% au repos

Pied de page des forums