logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 27-02-2021 14:57:54

syrtacus
Membre
Distrib. : debian stretch
Noyau : Linux 4.9.0-9-amd64
(G)UI : gnome
Inscription : 28-08-2019

Re : Installation HP ENVY Photo 7830

Si quelqu'un peut me venir en aide. J'ai tenté quelques commandes mais je n'y comprends vraiment rien!!!! Merci


root@sylvaindeb:~# hp-setup --qt3

HP Linux Imaging and Printing System (ver. 3.20.9)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


Installs HPLIP printers and faxes in the CUPS spooler. Tries to automatically determine the correct PPD file to use. Allows the printing of a testpage. Performs basic fax parameter setup.

Usage: hp-setup [MODE] [OPTIONS] [SERIAL NO.|USB bus:device|IP|DEVNODE]

[MODE]
  Run in graphical UI mode:       -u or --gui (Default)                                                        
  Run in interactive mode:        -i or --interactive                                                          

[OPTIONS]
  Automatic mode:                 -a or --auto (-i mode only)                                                  
  To specify the port on a        --port=<port> (Valid values are 1*, 2, and 3. *default)                      
  multi-port JetDirect:                                                                                        
  No testpage in automatic mode:  -x (-i mode only)                                                            
  To specify a CUPS printer       -p<printer> or --printer=<printer> (-i mode only)                            
  queue name:                                                                                                  
  To specify a CUPS fax queue     -f<fax> or --fax=<fax> (-i mode only)                                        
  name:                                                                                                        
  Type of queue(s) to install:    -t<typelist> or --type=<typelist>. <typelist>: print*, fax* (*default) (-i    
                                  mode only)                                                                    
  To specify the device URI to    -d<device> or --device=<device> (--qt4 mode only)                            
  install:                                                                                                      
  Remove printers or faxes        -r or --rm or --remove                                                        
  instead of setting-up:                                                                                        
  Set the language:               --loc=<lang> or --lang=<lang>. Use --loc=? or --lang=? to see a list of      
                                  available language codes.                                                    
  Set the logging level:          -l<level> or --logging=<level>                                                
                                  <level>: none, info*, error, warn, debug (*default)                          
  Run in debug mode:              -g (same as option: -ldebug)                                                  
  This help information:          -h or --help                                                                  

[SERIAL NO.|USB ID|IP|DEVNODE]
  USB bus:device (usb only):      "xxx:yyy" where 'xxx' is the USB bus and 'yyy' is the USB device. (Note: The  
                                  ':' and all leading zeros must be present.)                                  
                                  Use the 'lsusb' command to obtain this information.                          
  IPs (network only):             IPv4 address "a.b.c.d" or "hostname"                                          
  DEVNODE (parallel only):        "/dev/parportX", X=0,1,2,...                                                  
  SERIAL NO. (usb and parallel    "serial no."                                                                  
  only):                                                                                                        

Examples:
  Setup using GUI mode:           $ hp-setup                                                                    
  Setup using GUI mode,           $ hp-setup -b usb                                                            
  specifying usb:                                                                                              
  Setup using GUI mode,           $ hp-setup 192.168.0.101                                                      
  specifying an IP:                                                                                            
  One USB printer attached,       $ hp-setup -i -a                                                              
  automatic:                                                                                                    
  USB, IDs specified:             $ hp-setup -i 001:002                                                        
  Network:                        $ hp-setup -i 66.35.250.209                                                  
  Network, Jetdirect port 2:      $ hp-setup -i --port=2 66.35.250.209                                          
  Parallel:                       $ hp-setup -i /dev/parport0                                                  
  USB or parallel, using serial   $ hp-setup -i US12345678A                                                    
  number:                                                                                                      
  USB, automatic:                 $ hp-setup -i --auto 001:002                                                  
  Parallel, automatic, no         $ hp-setup -i -a -x /dev/parport0                                            
  testpage:                                                                                                    
  Parallel, choose device:        $ hp-setup -i -b par                                                          

Notes:
1. If no serial number, USB ID, IP, or device node is specified, the USB and parallel busses will be probed for devices.
2. Using 'lsusb' to obtain USB IDs: (example)
  $ lsusb
  Bus 003 Device 011: ID 03f0:c202 Hewlett-Packard
  $ hp-setup --auto 003:011
  (Note: You may have to run 'lsusb' from /sbin or another location. Use '$ locate lsusb' to determine this.)
3. Parameters -a, -f, -p, or -t are not valid in GUI (-u) mode.

See Also:
hp-makeuri
hp-probe

error: option --qt3 not recognized
root@sylvaindeb:~# hp-probe
warning: hp-probe should not be run as root/superuser.

HP Linux Imaging and Printing System (ver. 3.20.9)
Printer Discovery Utility ver. 4.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------

  Num       Connection  Description                                              
            Type                                                                  
  --------  ----------  ----------------------------------------------------------
  0*        usb         Universal Serial Bus (USB)                                
  1         net         Network/Ethernet/Wireless (direct connection or JetDirect)

Enter number 0...1 for connection type (q=quit, enter=usb*) ? 1

Using connection type: net


--------------------
| DEVICE DISCOVERY |
--------------------

Probing network for printers. Please wait, this will take approx. 10 seconds...

warning: No devices found on the 'net' bus. If this isn't the result you are expecting,
warning: check your network connections and make sure your internet
warning: firewall software is disabled.

Done.

Hors ligne

Pied de page des forums