logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 09-10-2021 09:54:04

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

[RESOLU]J'ai du mal avec Samba.

Bonjour à tous smile

Problème : les fichiers atterrissant sur les dossiers partagés sont TOUS exécutables.
C'est gênant.
Lorsqu'ils viennent d'une bécane Windows, je peux comprendre. Mais de bécanes Linux, je ne comprends pas.
C'est peut-être le umask 07000 qui fait ça ?

Pourtant, sur l'une de mes machines, qui était sous Stretch, les fichiers envoyés par Linux n'étaient PAS exécutables.

Ma procédure pour créer un partage :


# Ouverture des ports :

ufw allow in 137/udp
ufw allow in 138/udp

ufw allow out 137/tcp
ufw allow out 138/tcp

ufw allow in 139/tcp
ufw allow out 139/tcp

ufw allow in 445/udp
ufw allow out 445/tcp

# Création de l'user 'partage'
adduser partage
smbpasswd -a partage [mot de passe]

# Création de deux dossiers, sur le /home :

# Dossier pour les bécanes Linux :

mkdir -p /home/partage/Public
chmod -R o=rwX /home/partage/Public  # [b]Notez bien le X majuscule. C'est là que se situe le pépin. X et non pas x minuscule.[/b]

touch /home/partage/Public/Test/x.txt
chmod -R o=+r+w+X /home/partage/Public/*
chmod o=+r+w+X /home/partage/Public/*
rm -rf /home/partage/Public/Test


# Création du dossier partagé pour les bécanes Windows :
mkdir -p /home/Public
touch /home/Public/Test/x.txt
chmod -R o=rwX /home/Public/*
rm -rf /home/Public/Test/*

 




A présent, le smb.conf :



#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###
netbios name = 155-DEB
hosts allow = 192.168.0. etc
security = user

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================
[1151-public]
comment = Dossier public
path = /home/partage/uc-1155
browseable = yes
public = yes
writable = yes
security = users

[1151-Windows]
comment = Dossier public
path = /home/Public
browseable = yes
public = yes
writable = yes


[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin




 



Où est-ce que je me plante ?

Merci :hello:

Ah ! M*! Je vous ai envoyé le smb.conf qui n'est pas celui de la bécane 1155... Mes excuses.
Je vais remettre en ligne le BON smb.conf .

Cela étant, ça ne changera pas grand chose. Sous Stretch, les fichiers n'étaitent pas exécutables. Sous Buster, si.
Mystère scratchhead.gif

Dernière modification par Lupa (13-10-2022 09:44:50)

Hors ligne

#2 09-10-2021 20:41:36

d33p
Membre
Lieu : Cantal
Distrib. : Debian bookworm 64bits
Noyau : Linux 5.16.0-5-amd64
(G)UI : GNOME
Inscription : 01-12-2015

Re : [RESOLU]J'ai du mal avec Samba.

salut,

perso au lieu de jouer avec les mask linux-unix je joue avec les ACLs , regarde voir setfacl etc. (lors des partages samba)
sinon dans smb.conf peut etre ajouter :

#======================= Global Settings =======================

[global]

inherit permissions = yes



et exemple d'un de mes partages dans smb.conf:


#lvmshare
[smb_lvm]
        comment = smb_lvm
        path = /mnt/lvm
        browseable = yes
        readonly = no
        guest ok = no
        valid users = user
        inherit acls = yes
 




jc

Dernière modification par d33p (16-10-2021 21:03:13)


science sans conscience n'est que ruine de l'âme...

Hors ligne

#3 11-10-2021 12:39:48

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : [RESOLU]J'ai du mal avec Samba.

Bonjour dp33 wink

J'ai mis à jour mon smb.conf dans mon sujet.
Question  : avec cette modification que tu me suggère sur le smb.conf, dois-je aussi y aller avec les ACL ?
Donc, je retire le 0700 du smb.conf, c'est bien ça ?

Je tente le coup, et donne le retour.

Merci :hello:

Hors ligne

#4 16-10-2021 20:57:50

d33p
Membre
Lieu : Cantal
Distrib. : Debian bookworm 64bits
Noyau : Linux 5.16.0-5-amd64
(G)UI : GNOME
Inscription : 01-12-2015

Re : [RESOLU]J'ai du mal avec Samba.

re-bonjour,

perso je n'ai pas touché aux permissions de base Linux, je les ai laissé par défaut, j'ai juste joué avec les ACLs.
et sinon le seul endroit où j'ai 0700 dans mon smb.conf c'est dans la partie par defaut :

;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700



les autres sont en commentaire, donc non actif.

je dirais qu'il faut repartir d'une config de base, par defaut, pour être sûr de partir sur une base saine, genre tester sur un nouveau repertoire et un smb.conf par defaut aussi.
et pour les configs acl il ne faudra pas oublier :

setfacl -Rm user:utilisateur:rwx repertoire/


et

setfacl -Rm d:user:utilisateur:rwx repertoire/


une ligne pour definir les ACLs et une autre pour definir les ACLs par defaut (d'où le "d") lors des nouvelles creations dans le(s) repertoire(s) enfants.

(ce sont des exemples que tu dois modifier en fonction de tes besoins)

En esperant que cela puisse t'aider.

JC

Dernière modification par d33p (16-10-2021 21:01:03)


science sans conscience n'est que ruine de l'âme...

Hors ligne

#5 17-10-2021 07:04:23

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : [RESOLU]J'ai du mal avec Samba.

Bonjour smile

Oui. Tout à fait. Entre la modification de mes smb.conf et les ACL, je devrais résoudre ça.
Ah ! Les ACL ! Pour les faire "persistantes", c'est tout un programme.

setfacl -Rm groupe:rwX ./Dossier/
C'est le "d" qui les rend persistantes... mais la syntaxe peu changer d'une bécane à une autre.
Au fait : il paraît que  -pour une fois qui n'est pas coutume- Linux emprunte à Windows (les NTFS). C'est rare. Le kernel de Linux s'est retrouvé souvent ailleurs. Apple, selon ce que je crois savoir, a travaillé proprement : ils ont payé pour emprunter le travail des autres. Pas tout le monde...

Je donne le retour.

Hors ligne

#6 11-10-2022 10:32:12

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : [RESOLU]J'ai du mal avec Samba.

Bonjour à tous smile
Désolé pour cette exhumation de post. Mais si cela peut rendre service...


[Nom_Rep_Public]
comment = Dossier public
path = /home/Rep_public
browseable = yes
public = yes
writable = yes
security = users
guest ok = no

create mask = 0660
directory mask = 0775

valid users = partage


 



Et les fichiers ne sont plus exécutables; D'où qu'ils viennent. Y compris de Windows.

L'user partage devrait avoir de préférence un psw différent que son psw Samba.
De toute façon, j'ai saisi ça :


chmod o=-rw ./partage # de la sorte, on n'a plus accès à son squelette depuis le réseau. Auparavant, si. Et si on le vire sans faire attention, aïe :/
 



En fait, les droits Samba surchargent les droits Linux. C'est dit expressément dans le tuto de DF.
Donc, pour les ACL, j'avais essayé. Mais
1- syntaxiquement, c'est assez méchant
2- ça ne changeait rien : mes fichiers étaient toujours exécutables.

Hors ligne

#7 11-10-2022 12:38:55

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : [RESOLU]J'ai du mal avec Samba.

Hello

testparm


il y aura sûrement des erreurs

WARNING: Ignoring invalid value 'users' for parameter 'security'


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#8 13-10-2022 08:06:23

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : [RESOLU]J'ai du mal avec Samba.

Bonjour :
Voici le résultat de testparm :


# Global parameters
[global]
  log file = /var/log/samba/log.%m
  logging = file
  map to guest = Bad User
  max log size = 1000
  obey pam restrictions = Yes
  pam password change = Yes
  panic action = /usr/share/samba/panic-action %d
  passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
  passwd program = /usr/bin/passwd %u
  security = USER
  server role = standalone server
  unix password sync = Yes
  usershare allow guests = Yes
  idmap config * : backend = tdb
  hosts allow = 192.168.0.etc...


[1151-public]
  comment = Dossier public
  create mask = 0660
  directory mask = 0775
  path = /home/partage/uc-1151
  read only = No
  valid users = partage


[homes]
  browseable = No
  comment = Home Directories
  valid users = %S


[printers]
  browseable = No
  comment = All Printers
  create mask = 0700
  path = /var/spool/samba
  printable = Yes


[print$]
  comment = Printer Drivers
  path = /var/lib/samba/printers

 



Une erreur, là-dedans ? scratchhead.gif

Hors ligne

#9 13-10-2022 08:20:44

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : [RESOLU]J'ai du mal avec Samba.

non plus d'erreur de syntaxe

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#10 13-10-2022 09:44:18

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : [RESOLU]J'ai du mal avec Samba.

OK. Merci.
Ben c'est bon, alors.
Je marque RESOLU.

Hors ligne

Pied de page des forums