Je me suis acheté une canon très récemment, la communication fonctionne mais aucune impression. Pas de message d'erreur ?
[ 0.000000] Linux version 4.19.0-18-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.208-1 (2021-09-29)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-18-amd64 root=UUID=16d1d504-cca6-490c-92ba-818b82795d20 ro threadirqs quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000ca9f6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca9f7000-0x00000000caa3afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caa3b000-0x00000000cadb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001edffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 790/0HY9JP, BIOS A21 02/12/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3092.840 MHz processor
[ 0.001636] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001638] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001643] last_pfn = 0x1ee000 max_arch_pfn = 0x400000000
[ 0.001646] MTRR default type: uncachable
[ 0.001647] MTRR fixed ranges enabled:
[ 0.001648] 00000-97FFF write-back
[ 0.001648] 98000-9BFFF write-protect
[ 0.001649] 9C000-9FFFF write-back
[ 0.001649] A0000-BFFFF uncachable
[ 0.001650] C0000-FFFFF write-protect
[ 0.001651] MTRR variable ranges enabled:
[ 0.001652] 0 base 000000000 mask F80000000 write-back
[ 0.001653] 1 base 080000000 mask FC0000000 write-back
[ 0.001653] 2 base 0C0000000 mask FF8000000 write-back
[ 0.001654] 3 base 0C8000000 mask FFC000000 write-back
[ 0.001654] 4 base 0CB000000 mask FFF000000 uncachable
[ 0.001655] 5 base 100000000 mask F00000000 write-back
[ 0.001656] 6 base 1F0000000 mask FF0000000 uncachable
[ 0.001656] 7 base 1EE000000 mask FFE000000 uncachable
[ 0.001657] 8 disabled
[ 0.001657] 9 disabled
[ 0.002426] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002528] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.002533] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.004629] found SMP MP-table at [mem 0x000f2210-0x000f221f]
[ 0.004683] reserving inaccessible SNB gfx pages
[ 0.005091] RAMDISK: [mem 0x332bb000-0x35954fff]
[ 0.005093] ACPI: Early table checksum verification disabled
[ 0.005159] ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL )
[ 0.005161] ACPI: XSDT 0x00000000CAFFDE18 00007C (v01 DELL CBX3 06222004 MSFT 00010013)
[ 0.005165] ACPI: FACP 0x00000000CAF87D98 0000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
[ 0.005169] ACPI: DSDT 0x00000000CAF71018 007581 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[ 0.005172] ACPI: FACS 0x00000000CAFE4E40 000040
[ 0.005174] ACPI: FACS 0x00000000CAFE4D40 000040
[ 0.005175] ACPI: APIC 0x00000000CAFFCF18 0000CC (v02 DELL CBX3 06222004 MSFT 00010013)
[ 0.005177] ACPI: TCPA 0x00000000CAFE5D18 000032 (v02 00000000 00000000)
[ 0.005180] ACPI: SSDT 0x00000000CAF88A98 0002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
[ 0.005182] ACPI: MCFG 0x00000000CAFE5C98 00003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
[ 0.005184] ACPI: HPET 0x00000000CAFE5C18 000038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
[ 0.005186] ACPI: BOOT 0x00000000CAFE5B98 000028 (v01 DELL CBX3 06222004 AMI 00010013)
[ 0.005188] ACPI: SSDT 0x00000000CAF7E818 0007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
[ 0.005191] ACPI: SSDT 0x00000000CAF7D018 000996 (v01 PmRef CpuPm 00003000 INTL 20090903)
[ 0.005193] ACPI: DMAR 0x00000000CAF87C18 0000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.005195] ACPI: SLIC 0x00000000CAF86C18 000176 (v03 DELL CBX3 06222004 MSFT 00010013)
[ 0.005197] ACPI: Reserving FACP table memory at [mem 0xcaf87d98-0xcaf87e8b]
[ 0.005198] ACPI: Reserving DSDT table memory at [mem 0xcaf71018-0xcaf78598]
[ 0.005198] ACPI: Reserving FACS table memory at [mem 0xcafe4e40-0xcafe4e7f]
[ 0.005199] ACPI: Reserving FACS table memory at [mem 0xcafe4d40-0xcafe4d7f]
[ 0.005200] ACPI: Reserving APIC table memory at [mem 0xcaffcf18-0xcaffcfe3]
[ 0.005200] ACPI: Reserving TCPA table memory at [mem 0xcafe5d18-0xcafe5d49]
[ 0.005201] ACPI: Reserving SSDT table memory at [mem 0xcaf88a98-0xcaf88d90]
[ 0.005201] ACPI: Reserving MCFG table memory at [mem 0xcafe5c98-0xcafe5cd3]
[ 0.005202] ACPI: Reserving HPET table memory at [mem 0xcafe5c18-0xcafe5c4f]
[ 0.005203] ACPI: Reserving BOOT table memory at [mem 0xcafe5b98-0xcafe5bbf]
[ 0.005203] ACPI: Reserving SSDT table memory at [mem 0xcaf7e818-0xcaf7efd9]
[ 0.005204] ACPI: Reserving SSDT table memory at [mem 0xcaf7d018-0xcaf7d9ad]
[ 0.005204] ACPI: Reserving DMAR table memory at [mem 0xcaf87c18-0xcaf87cff]
[ 0.005205] ACPI: Reserving SLIC table memory at [mem 0xcaf86c18-0xcaf86d8d]
[ 0.005214] ACPI: Local APIC address 0xfee00000
[ 0.005283] No NUMA configuration found
[ 0.005284] Faking a node at [mem 0x0000000000000000-0x00000001edffffff]
[ 0.005287] NODE_DATA(0) allocated [mem 0x1edff8000-0x1edffcfff]
[ 0.005309] Zone ranges:
[ 0.005310] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005311] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005311] Normal [mem 0x0000000100000000-0x00000001edffffff]
[ 0.005312] Device empty
[ 0.005313] Movable zone start for each node
[ 0.005313] Early memory node ranges
[ 0.005314] node 0: [mem 0x0000000000001000-0x0000000000099fff]
[ 0.005315] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.005315] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.005315] node 0: [mem 0x0000000040200000-0x00000000ca9f6fff]
[ 0.005316] node 0: [mem 0x00000000caa3b000-0x00000000cadb6fff]
[ 0.005316] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.005317] node 0: [mem 0x0000000100000000-0x00000001edffffff]
[ 0.005767] Zeroed struct page in unavailable ranges: 30451 pages
[ 0.005768] Initmem setup node 0 [mem 0x0000000000001000-0x00000001edffffff]
[ 0.005770] On node 0 totalpages: 1804557
[ 0.005771] DMA zone: 64 pages used for memmap
[ 0.005771] DMA zone: 153 pages reserved
[ 0.005772] DMA zone: 3993 pages, LIFO batch:0
[ 0.005858] DMA32 zone: 12902 pages used for memmap
[ 0.005858] DMA32 zone: 825716 pages, LIFO batch:63
[ 0.024550] Normal zone: 15232 pages used for memmap
[ 0.024552] Normal zone: 974848 pages, LIFO batch:63
[ 0.044996] Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
[ 0.045123] ACPI: PM-Timer IO Port: 0x408
[ 0.045124] ACPI: Local APIC address 0xfee00000
[ 0.045140] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.045141] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.045143] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.045144] ACPI: IRQ0 used by override.
[ 0.045145] ACPI: IRQ9 used by override.
[ 0.045146] Using ACPI (MADT) for SMP configuration information
[ 0.045147] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.045151] TSC deadline timer available
[ 0.045152] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.045170] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.045171] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[ 0.045172] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[ 0.045172] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.045173] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.045174] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.045175] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.045176] PM: Registered nosave memory: [mem 0xca9f7000-0xcaa3afff]
[ 0.045177] PM: Registered nosave memory: [mem 0xcadb7000-0xcade6fff]
[ 0.045178] PM: Registered nosave memory: [mem 0xcade7000-0xcafe6fff]
[ 0.045178] PM: Registered nosave memory: [mem 0xcafe7000-0xcaffefff]
[ 0.045180] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
[ 0.045180] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
[ 0.045180] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
[ 0.045181] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.045181] PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
[ 0.045182] PM: Registered nosave memory: [mem 0xffc00000-0xffc1ffff]
[ 0.045182] PM: Registered nosave memory: [mem 0xffc20000-0xffffffff]
[ 0.045184] [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[ 0.045184] Booting paravirtualized kernel on bare hardware
[ 0.045187] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.135158] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0
[ 0.135163] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.135530] percpu: Embedded 45 pages/cpu s144536 r8192 d31592 u262144
[ 0.135538] pcpu-alloc: s144536 r8192 d31592 u262144 alloc=1*2097152
[ 0.135539] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.135560] Built 1 zonelists, mobility grouping on. Total pages: 1776206
[ 0.135561] Policy zone: Normal
[ 0.135563] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-18-amd64 root=UUID=16d1d504-cca6-490c-92ba-818b82795d20 ro threadirqs quiet
[ 0.139130] Calgary: detecting Calgary via BIOS EBDA area
[ 0.139136] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.158096] Memory: 6969764K/7218228K available (10252K kernel code, 1242K rwdata, 3332K rodata, 1596K init, 2260K bss, 248464K reserved, 0K cma-reserved)
[ 0.158181] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.158187] Kernel/User page tables isolation: enabled
[ 0.158221] ftrace: allocating 32002 entries in 126 pages
[ 0.168657] rcu: Hierarchical RCU implementation.
[ 0.168659] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.168660] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.171196] NR_IRQS: 33024, nr_irqs: 552, preallocated irqs: 16
[ 0.172930] Console: colour VGA+ 80x25
[ 0.172933] console [tty0] enabled
[ 0.172949] ACPI: Core revision 20180810
[ 0.173094] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.173103] hpet clockevent registered
[ 0.173109] APIC: Switch to symmetric I/O mode setup
[ 0.173110] DMAR: Host address width 36
[ 0.173110] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.173114] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.173115] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.173117] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.173117] DMAR: RMRR base: 0x000000cadc6000 end: 0x000000cadd5fff
[ 0.173118] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
[ 0.173120] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.173120] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.173121] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.173488] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.173489] x2apic enabled
[ 0.173495] Switched APIC routing to cluster x2apic.
[ 0.173905] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.193108] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94dc1ce7d, max_idle_ns: 440795323863 ns
[ 0.193120] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.68 BogoMIPS (lpj=12371360)
[ 0.193122] pid_max: default: 32768 minimum: 301
[ 0.193148] Security Framework initialized
[ 0.193149] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.193166] AppArmor: AppArmor initialized
[ 0.194235] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.194816] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.194847] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.194867] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.195051] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.195052] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.195063] CPU0: Thermal monitoring enabled (TM1)
[ 0.195073] process: using mwait in idle threads
[ 0.195076] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.195076] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.195078] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.195079] Spectre V2 : Mitigation: Full generic retpoline
[ 0.195079] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.195079] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.195087] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.195087] Speculative Store Bypass: Vulnerable
[ 0.195110] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.195244] Freeing SMP alternatives memory: 24K
[ 0.196942] smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.197023] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.197041] ... version: 3
[ 0.197042] ... bit width: 48
[ 0.197042] ... generic registers: 8
[ 0.197043] ... value mask: 0000ffffffffffff
[ 0.197043] ... max period: 00007fffffffffff
[ 0.197044] ... fixed-purpose events: 3
[ 0.197044] ... event mask: 00000007000000ff
[ 0.197097] rcu: Hierarchical SRCU implementation.
[ 0.197109] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.197109] smp: Bringing up secondary CPUs ...
[ 0.197109] x86: Booting SMP configuration:
[ 0.197109] .... node #0, CPUs: #1 #2 #3
[ 0.201157] smp: Brought up 1 node, 4 CPUs
[ 0.201157] smpboot: Max logical packages: 4
[ 0.201157] smpboot: Total of 4 processors activated (24742.72 BogoMIPS)
[ 0.203466] devtmpfs: initialized
[ 0.203466] x86/mm: Memory block size: 128MB
[ 0.203466] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
[ 0.203466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.203466] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.203466] pinctrl core: initialized pinctrl subsystem
[ 0.203466] NET: Registered protocol family 16
[ 0.203466] audit: initializing netlink subsys (disabled)
[ 0.203466] audit: type=2000 audit(1518394114.028:1): state=initialized audit_enabled=0 res=1
[ 0.203466] cpuidle: using governor ladder
[ 0.203466] cpuidle: using governor menu
[ 0.203466] Simple Boot Flag value 0x0 read from CMOS RAM was invalid
[ 0.203466] Simple Boot Flag at 0xf3 set to 0x80
[ 0.203466] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.203466] ACPI: bus type PCI registered
[ 0.203466] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.203466] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.203466] PCI: not using MMCONFIG
[ 0.203466] PCI: Using configuration type 1 for base access
[ 0.203466] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.205176] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.205176] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.205176] mtrr: probably your BIOS does not setup all CPUs.
[ 0.205177] mtrr: corrected configuration.
[ 0.205669] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.205669] ACPI: Added _OSI(Module Device)
[ 0.205669] ACPI: Added _OSI(Processor Device)
[ 0.205669] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.205669] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.205669] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.205669] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.208376] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.209549] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.213286] ACPI: Dynamic OEM Table Load:
[ 0.213291] ACPI: SSDT 0xFFFF943524E01800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 0.213562] ACPI: Dynamic OEM Table Load:
[ 0.213565] ACPI: SSDT 0xFFFF943524E0F400 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 0.213732] ACPI: Dynamic OEM Table Load:
[ 0.213735] ACPI: SSDT 0xFFFF943524E4EE00 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 0.214234] ACPI: Interpreter enabled
[ 0.214248] ACPI: (supports S0 S3 S4 S5)
[ 0.214249] ACPI: Using IOAPIC for interrupt routing
[ 0.214267] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.214523] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.214531] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.214649] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.218866] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.218870] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.218895] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.219228] PCI host bridge to bus 0000:00
[ 0.219229] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.219230] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.219231] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.219232] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[ 0.219233] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.219241] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.219312] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.219321] pci 0000:00:02.0: reg 0x10: [mem 0xe0c00000-0xe0ffffff 64bit]
[ 0.219325] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.219328] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.219410] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.219430] pci 0000:00:16.0: reg 0x10: [mem 0xe1bb0000-0xe1bb000f 64bit]
[ 0.219489] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.219555] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.219574] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[ 0.219581] pci 0000:00:19.0: reg 0x14: [mem 0xe1b80000-0xe1b80fff]
[ 0.219589] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 0.219644] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.219707] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.219728] pci 0000:00:1a.0: reg 0x10: [mem 0xe1b70000-0xe1b703ff]
[ 0.219806] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.219871] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.219891] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b60000-0xe1b63fff 64bit]
[ 0.219961] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.220027] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.220181] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.220271] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.220423] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.220511] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.220531] pci 0000:00:1d.0: reg 0x10: [mem 0xe1b50000-0xe1b503ff]
[ 0.220610] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.220672] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.220780] pci 0000:00:1f.0: [8086:1c4c] type 00 class 0x060100
[ 0.220938] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.220954] pci 0000:00:1f.2: reg 0x10: [io 0x30d0-0x30d7]
[ 0.220961] pci 0000:00:1f.2: reg 0x14: [io 0x30c0-0x30c3]
[ 0.220968] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7]
[ 0.220974] pci 0000:00:1f.2: reg 0x1c: [io 0x30a0-0x30a3]
[ 0.220981] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.220988] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b40000-0xe1b407ff]
[ 0.221025] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.221082] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.221099] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b30000-0xe1b300ff 64bit]
[ 0.221120] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.221255] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.221331] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.221336] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.221340] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff]
[ 0.221348] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.221365] pci_bus 0000:03: extended config space not accessible
[ 0.221384] pci 0000:03:02.0: [1033:0035] type 00 class 0x0c0310
[ 0.221399] pci 0000:03:02.0: reg 0x10: [mem 0xe1a20000-0xe1a20fff]
[ 0.221469] pci 0000:03:02.0: supports D1 D2
[ 0.221470] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.221509] pci 0000:03:02.1: [1033:0035] type 00 class 0x0c0310
[ 0.221524] pci 0000:03:02.1: reg 0x10: [mem 0xe1a10000-0xe1a10fff]
[ 0.221594] pci 0000:03:02.1: supports D1 D2
[ 0.221595] pci 0000:03:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.221629] pci 0000:03:02.2: [1033:00e0] type 00 class 0x0c0320
[ 0.221644] pci 0000:03:02.2: reg 0x10: [mem 0xe1a00000-0xe1a000ff]
[ 0.221714] pci 0000:03:02.2: supports D1 D2
[ 0.221715] pci 0000:03:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.221780] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.221785] pci 0000:00:1e.0: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.221790] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.221791] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.221792] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.221793] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
[ 0.222158] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.222196] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.222232] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.222269] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.222304] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.222341] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.222377] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.222412] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.222505] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.222505] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.222505] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.222505] vgaarb: loaded
[ 0.222505] pps_core: LinuxPPS API ver. 1 registered
[ 0.222505] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.222505] PTP clock support registered
[ 0.222505] EDAC MC: Ver: 3.0.0
[ 0.222505] PCI: Using ACPI for IRQ routing
[ 0.222592] PCI: pci_cache_line_size set to 64 bytes
[ 0.222631] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[ 0.222632] e820: reserve RAM buffer [mem 0xca9f7000-0xcbffffff]
[ 0.222633] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[ 0.222634] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.222634] e820: reserve RAM buffer [mem 0x1ee000000-0x1efffffff]
[ 0.222727] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.222727] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.226129] clocksource: Switched to clocksource tsc-early
[ 0.232095] VFS: Disk quotas dquot_6.6.0
[ 0.232095] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.232095] AppArmor: AppArmor Filesystem Enabled
[ 0.232095] pnp: PnP ACPI init
[ 0.233149] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.233151] system 00:00: [io 0xffff] has been reserved
[ 0.233152] system 00:00: [io 0xffff] has been reserved
[ 0.233153] system 00:00: [io 0xffff] has been reserved
[ 0.233154] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.233155] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.233156] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.233157] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.233162] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233181] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.233221] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.233224] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.233426] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.233572] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.233573] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.233574] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.233575] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.233576] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.233577] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.233579] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.233580] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.233581] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.233582] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.233585] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233616] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
[ 0.233617] system 00:05: [mem 0x40000000-0x401fffff] has been reserved
[ 0.233620] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.233694] pnp: PnP ACPI: found 6 devices
[ 0.239178] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.239190] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.239207] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.239210] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.239217] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff]
[ 0.239221] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.239230] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.239233] pci 0000:00:1e.0: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.239241] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.239242] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.239243] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.239244] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.239245] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.239246] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
[ 0.239247] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.239248] pci_bus 0000:03: resource 1 [mem 0xe1a00000-0xe1afffff]
[ 0.239249] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.239250] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.239250] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.239251] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.239311] NET: Registered protocol family 2
[ 0.239433] IP idents hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.240471] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.240497] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.240600] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.240714] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.240747] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.240768] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.240824] NET: Registered protocol family 1
[ 0.240828] NET: Registered protocol family 44
[ 0.240845] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.241426] PCI: CLS 64 bytes, default 64
[ 0.241458] Unpacking initramfs...
[ 0.770305] Freeing initrd memory: 39528K
[ 0.797135] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.797139] software IO TLB: mapped [mem 0xc69f7000-0xca9f7000] (64MB)
[ 0.797753] Initialise system trusted keyrings
[ 0.797761] Key type blacklist registered
[ 0.797803] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.798722] zbud: loaded
[ 0.954148] Key type asymmetric registered
[ 0.954149] Asymmetric key parser 'x509' registered
[ 0.954160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.954182] io scheduler noop registered
[ 0.954183] io scheduler deadline registered
[ 0.954207] io scheduler cfq registered (default)
[ 0.954207] io scheduler mq-deadline registered
[ 0.954622] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.954632] intel_idle: MWAIT substates: 0x1120
[ 0.954633] intel_idle: v0.4.1 model 0x2A
[ 0.954732] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.954932] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.975437] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.975879] Linux agpgart interface v0.103
[ 0.975919] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.975920] AMD IOMMUv2 functionality not available on this system
[ 0.976204] i8042: PNP: No PS/2 controller found.
[ 0.976204] i8042: Probing ports directly.
[ 0.978900] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.978905] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.979037] mousedev: PS/2 mouse device common for all mice
[ 0.979068] rtc_cmos 00:01: RTC can wake from S4
[ 0.979272] rtc_cmos 00:01: registered as rtc0
[ 0.979283] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.979291] intel_pstate: Intel P-state driver initializing
[ 0.979547] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.980202] NET: Registered protocol family 10
[ 0.991477] Segment Routing with IPv6
[ 0.991508] mip6: Mobile IPv6
[ 0.991511] NET: Registered protocol family 17
[ 0.991621] mpls_gso: MPLS GSO support
[ 0.991983] mce: Using 9 MCE banks
[ 0.992035] microcode: sig=0x206a7, pf=0x2, revision=0x2d
[ 0.992181] microcode: Microcode Update Driver: v2.2.
[ 0.992196] sched_clock: Marking stable (990439563, 1732199)->(997779531, -5607769)
[ 0.992665] registered taskstats version 1
[ 0.992666] Loading compiled-in X.509 certificates
[ 1.028897] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.028911] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.028926] zswap: loaded using pool lzo/zbud
[ 1.028997] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.029304] rtc_cmos 00:01: setting system clock to 2018-02-12 00:08:34 UTC (1518394114)
[ 1.030745] Freeing unused kernel image memory: 1596K
[ 1.049210] Write protecting the kernel read-only data: 16384k
[ 1.049938] Freeing unused kernel image memory: 2028K
[ 1.050203] Freeing unused kernel image memory: 764K
[ 1.063403] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.063405] x86/mm: Checking user space page tables
[ 1.069651] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.069653] Run /init as init process
[ 1.125733] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.125742] ACPI: Power Button [PWRB]
[ 1.125777] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.126033] ACPI: Power Button [PWRF]
[ 1.145190] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
[ 1.145195] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.145197] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 1.145199] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.145199] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 1.145201] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.145202] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 1.145203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.145204] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.149727] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.149728] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.150098] ACPI: bus type USB registered
[ 1.150117] usbcore: registered new interface driver usbfs
[ 1.150122] usbcore: registered new interface driver hub
[ 1.150134] usbcore: registered new device driver usb
[ 1.153767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.155563] ehci-pci: EHCI PCI platform driver
[ 1.155998] SCSI subsystem initialized
[ 1.156243] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.156380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.156810] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.156816] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.156828] ehci-pci 0000:00:1a.0: debug port 2
[ 1.160726] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.167120] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.168629] libata version 3.00 loaded.
[ 1.169396] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1b70000
[ 1.171106] cryptd: max_cpu_qlen set to 1000
[ 1.172119] ahci 0000:00:1f.2: version 3.0
[ 1.172272] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.172274] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.176898] AVX version of gcm_enc/dec engaged.
[ 1.176900] AES CTR mode by8 optimization enabled
[ 1.181511] scsi host0: ahci
[ 1.181614] scsi host1: ahci
[ 1.181855] scsi host2: ahci
[ 1.181932] scsi host3: ahci
[ 1.182001] scsi host4: ahci
[ 1.182069] scsi host5: ahci
[ 1.182116] ata1: SATA max UDMA/133 abar m2048@0xe1b40000 port 0xe1b40100 irq 27
[ 1.182118] ata2: SATA max UDMA/133 abar m2048@0xe1b40000 port 0xe1b40180 irq 27
[ 1.182119] ata3: DUMMY
[ 1.182120] ata4: DUMMY
[ 1.182120] ata5: DUMMY
[ 1.182120] ata6: DUMMY
[ 1.200258] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.200338] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.200340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200340] usb usb1: Product: EHCI Host Controller
[ 1.200341] usb usb1: Manufacturer: Linux 4.19.0-18-amd64 ehci_hcd
[ 1.200342] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.200450] hub 1-0:1.0: USB hub found
[ 1.200456] hub 1-0:1.0: 2 ports detected
[ 1.200678] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.200682] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.200693] ehci-pci 0000:00:1d.0: debug port 2
[ 1.204582] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.204612] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1b50000
[ 1.217157] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.217224] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.217225] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.217226] usb usb2: Product: EHCI Host Controller
[ 1.217227] usb usb2: Manufacturer: Linux 4.19.0-18-amd64 ehci_hcd
[ 1.217228] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.217389] hub 2-0:1.0: USB hub found
[ 1.217396] hub 2-0:1.0: 2 ports detected
[ 1.217587] ehci-pci 0000:03:02.2: EHCI Host Controller
[ 1.217592] ehci-pci 0000:03:02.2: new USB bus registered, assigned bus number 3
[ 1.217652] ehci-pci 0000:03:02.2: irq 16, io mem 0xe1a00000
[ 1.233238] ehci-pci 0000:03:02.2: USB 2.0 started, EHCI 0.95
[ 1.233496] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.233498] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.233499] usb usb3: Product: EHCI Host Controller
[ 1.233500] usb usb3: Manufacturer: Linux 4.19.0-18-amd64 ehci_hcd
[ 1.233500] usb usb3: SerialNumber: 0000:03:02.2
[ 1.233705] hub 3-0:1.0: USB hub found
[ 1.233739] hub 3-0:1.0: 5 ports detected
[ 1.243783] ohci-pci: OHCI PCI platform driver
[ 1.243883] ohci-pci 0000:03:02.0: OHCI PCI host controller
[ 1.243887] ohci-pci 0000:03:02.0: new USB bus registered, assigned bus number 4
[ 1.243944] ohci-pci 0000:03:02.0: irq 18, io mem 0xe1a20000
[ 1.246409] [drm] Replacing VGA console driver
[ 1.246776] Console: switching to colour dummy device 80x25
[ 1.255940] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.255940] [drm] Driver supports precise vblank timestamp query.
[ 1.256604] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.311369] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.338079] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 1.439431] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:dc:f6:7c
[ 1.439432] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.439490] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
[ 1.440256] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.453126] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.473126] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.629481] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.629482] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.629774] hub 2-1:1.0: USB hub found
[ 1.629856] hub 2-1:1.0: 8 ports detected
[ 1.811144] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[ 1.811150] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
[ 1.811174] clocksource: Switched to clocksource tsc
[ 1.811181] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 1.811183] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.811184] usb usb4: Product: OHCI PCI host controller
[ 1.811185] usb usb4: Manufacturer: Linux 4.19.0-18-amd64 ohci_hcd
[ 1.811185] usb usb4: SerialNumber: 0000:03:02.0
[ 1.811389] hub 4-0:1.0: USB hub found
[ 1.811406] hub 4-0:1.0: 3 ports detected
[ 1.811703] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.812019] acpi device:01: registered as cooling_device4
[ 1.812043] ohci-pci 0000:03:02.1: OHCI PCI host controller
[ 1.812048] ohci-pci 0000:03:02.1: new USB bus registered, assigned bus number 5
[ 1.812069] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.812549] ohci-pci 0000:03:02.1: irq 19, io mem 0xe1a10000
[ 1.836875] fbcon: inteldrmfb (fb0) is primary device
[ 1.909618] Console: switching to colour frame buffer device 160x64
[ 1.917500] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.917518] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.918026] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[ 1.918809] ata2.00: configured for UDMA/100
[ 1.919473] ata1.00: supports DRM functions and may not be fully accessible
[ 1.920568] ata1.00: disabling queued TRIM support
[ 1.920569] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT02B6Q, max UDMA/133
[ 1.920570] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.923175] ata1.00: supports DRM functions and may not be fully accessible
[ 1.924024] ata1.00: disabling queued TRIM support
[ 1.926123] ata1.00: configured for UDMA/133
[ 1.926264] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5
[ 1.926980] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
[ 1.928473] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.375200] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.375202] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.375203] usb usb5: Product: OHCI PCI host controller
[ 2.375204] usb usb5: Manufacturer: Linux 4.19.0-18-amd64 ohci_hcd
[ 2.375204] usb usb5: SerialNumber: 0000:03:02.1
[ 2.375341] hub 5-0:1.0: USB hub found
[ 2.375349] hub 5-0:1.0: 2 ports detected
[ 2.417710] ata1.00: Enabling discard_zeroes_data
[ 2.417731] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.417736] sd 0:0:0:0: [sda] Write Protect is off
[ 2.417741] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.417748] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.417823] ata1.00: Enabling discard_zeroes_data
[ 2.419677] sda: sda1 sda2 < sda5 >
[ 2.420026] ata1.00: Enabling discard_zeroes_data
[ 2.421096] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.421097] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.426129] random: fast init done
[ 2.451235] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.451238] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.451585] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.461820] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.461823] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.462213] hub 1-1:1.0: USB hub found
[ 2.462402] hub 1-1:1.0: 6 ports detected
[ 2.557156] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[ 2.649162] usb 4-1: new full-speed USB device number 2 using ohci-pci
[ 2.668620] usb 2-1.2: New USB device found, idVendor=2573, idProduct=001a, bcdDevice= 1.00
[ 2.668623] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.668625] usb 2-1.2: Product: ESI MIDIMATE eX
[ 2.668627] usb 2-1.2: Manufacturer: Ploytec GmbH
[ 2.749140] usb 1-1.4: new low-speed USB device number 3 using ehci-pci
[ 2.817118] raid6: sse2x1 gen() 9860 MB/s
[ 2.863256] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[ 2.863257] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.863258] usb 1-1.4: Product: USB-PS/2 Optical Mouse
[ 2.863259] usb 1-1.4: Manufacturer: Logitech
[ 2.869229] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.874220] usbcore: registered new interface driver usbhid
[ 2.874221] usbhid: USB HID core driver
[ 2.875635] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C03E.0001/input/input6
[ 2.875690] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[ 2.885117] raid6: sse2x1 xor() 7033 MB/s
[ 2.888133] usb 4-1: New USB device found, idVendor=0e41, idProduct=4151, bcdDevice= 0.01
[ 2.888135] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.888135] usb 4-1: Product: UX2
[ 2.888136] usb 4-1: Manufacturer: Line 6
[ 2.953117] raid6: sse2x2 gen() 11997 MB/s
[ 3.021114] raid6: sse2x2 xor() 8159 MB/s
[ 3.089116] raid6: sse2x4 gen() 14253 MB/s
[ 3.157113] raid6: sse2x4 xor() 9442 MB/s
[ 3.157114] raid6: using algorithm sse2x4 gen() 14253 MB/s
[ 3.157115] raid6: .... xor() 9442 MB/s, rmw enabled
[ 3.157116] raid6: using ssse3x2 recovery algorithm
[ 3.167363] xor: automatically using best checksumming function avx
[ 3.238411] Btrfs loaded, crc32c=crc32c-intel
[ 3.394428] PM: Image not found (code -22)
[ 3.449134] usb 5-2: new low-speed USB device number 2 using ohci-pci
[ 3.684152] usb 5-2: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[ 3.684154] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.684155] usb 5-2: Product: Dell QuietKey Keyboard
[ 3.684155] usb 5-2: Manufacturer: DELL
[ 3.694363] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:03:02.1/usb5/5-2/5-2:1.0/0003:413C:2106.0002/input/input7
[ 3.753302] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:03:02.1-2/input0
[ 8.569341] random: crng init done
[ 9.769931] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.897340] systemd[1]: System time before build time, advancing clock.
[ 9.917405] systemd[1]: Inserted module 'autofs4'
[ 9.931788] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 9.949255] systemd[1]: Detected architecture x86-64.
[ 9.952124] systemd[1]: Set hostname to <librazik3>.
[ 10.052845] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 10.070115] systemd[1]: /lib/systemd/system/idrivecron.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/idrivecron.pid → /run/idrivecron.pid; please update the unit file accordingly.
[ 10.090370] systemd[1]: Created slice system-getty.slice.
[ 10.090507] systemd[1]: Listening on udev Kernel Socket.
[ 10.090641] systemd[1]: Listening on Journal Audit Socket.
[ 10.090696] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 10.090708] systemd[1]: Reached target User and Group Name Lookups.
[ 10.112500] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.122263] lp: driver loaded but no devices found
[ 10.132649] ppdev: user-space parallel port driver
[ 10.135016] parport0: PC-style at 0x378 (0x778)
[ 10.193464] loop: module loaded
[ 10.214868] systemd-journald[341]: Received request to flush runtime journal from PID 1
[ 10.227951] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.269243] [PCSPP,TRISTATE,EPP]
[ 10.269246] parport0: irq 7 detected
[ 10.294592] iTCO_vendor_support: vendor-support=0
[ 10.296307] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.296329] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.296345] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 10.296415] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.296436] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 10.357323] usbcore: registered new interface driver snd-usb-audio
[ 10.365207] lp0: using parport0 (polling).
[ 10.394966] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 10.394968] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 10.394969] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 10.394969] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 10.395077] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 10.405782] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 10.431865] fuse init (API version 7.27)
[ 10.432328] snd_usb_toneport 4-1:1.0: Line 6 POD Studio UX2 found
[ 10.436231] Adding 7216124k swap on /dev/sda5. Priority:-2 extents:1 across:7216124k SSFS
[ 10.438968] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[ 10.439263] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 10.439264] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 10.439265] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.439265] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.439266] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.439268] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
[ 10.439268] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
[ 10.481330] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 10.482146] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.482181] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.482214] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.482248] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.482285] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.523776] snd_usb_toneport 4-1:1.0: Line 6 POD Studio UX2 now attached
[ 10.523801] usbcore: registered new interface driver snd_usb_toneport
[ 10.599218] audit: type=1400 audit(1550139118.696:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=573 comm="apparmor_parser"
[ 10.602178] audit: type=1400 audit(1550139118.700:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=571 comm="apparmor_parser"
[ 10.602776] audit: type=1400 audit(1550139118.700:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=575 comm="apparmor_parser"
[ 10.603743] audit: type=1400 audit(1550139118.700:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=574 comm="apparmor_parser"
[ 10.603746] audit: type=1400 audit(1550139118.700:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=574 comm="apparmor_parser"
[ 10.604620] audit: type=1400 audit(1550139118.700:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=572 comm="apparmor_parser"
[ 10.604623] audit: type=1400 audit(1550139118.700:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=572 comm="apparmor_parser"
[ 10.604624] audit: type=1400 audit(1550139118.700:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=572 comm="apparmor_parser"
[ 10.606163] audit: type=1400 audit(1550139118.704:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=577 comm="apparmor_parser"
[ 10.609150] audit: type=1400 audit(1550139118.708:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=576 comm="apparmor_parser"
[ 10.675698] intel_rapl: Found RAPL domain package
[ 10.675699] intel_rapl: Found RAPL domain core
[ 10.675700] intel_rapl: Found RAPL domain uncore
[ 10.675704] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 11.171090] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 11.413470] broken atomic modeset userspace detected, disabling atomic
[ 11.449369] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 14.303119] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 14.303157] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 14.416978] Guest personality initialized and is inactive
[ 14.417022] VMCI host device registered (name=vmci, major=10, minor=58)
[ 14.417023] Initialized host personality
[ 14.439481] NET: Registered protocol family 40
[ 14.755268] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 14.756809] Bridge firewalling registered
[ 14.871022] Initializing XFRM netlink socket
[ 14.910544] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 73.333127] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 73.450358] usb 1-1.3: New USB device found, idVendor=04a9, idProduct=188d, bcdDevice= 1.06
[ 73.450360] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 73.450361] usb 1-1.3: Product: TS6300 series
[ 73.450362] usb 1-1.3: Manufacturer: Canon
[ 73.450363] usb 1-1.3: SerialNumber: 1380B8
[ 73.496370] usblp 1-1.3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x188D
[ 73.497635] usbcore: registered new interface driver usblp
[ 78.558394] usblp0: removed
[ 78.562566] usblp 1-1.3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x188D
[ 192.766721] usblp0: removed
[ 192.768323] usblp 1-1.3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x188D
[ 294.760544] usblp0: removed
[ 555.577336] usblp 1-1.3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x188D