Perte d'accès à ma partition Debian 11 (sur clef USB)

alainr2109 · 19-05-2022 20:46:34

Bonjour aux initiés en Debian,

Voilà mon problème:

1/ Sur DebianBullseye (64 bits):
************************************
/dev/sdb (4 partitions)(clef USB)

Root# gdisk /dev/sdb p

Partition number (1-4): 2
Partition GUID code: 0FC63DAF-8483-4772-8E79-3D69D8477DE4 (Linux filesystem)
Partition unique GUID: F6C197CA-FF66-4EDF-8828-87BC5FAF13AE
First sector: 1050624 (at 513.0 MiB)
Last sector: 166823935 (at 79.5 GiB)
Partition size: 165773312 sectors (79.0 GiB)
Attribute flags: 0000000000000000
Partition name: 'Bullseye_Usb'

q
root#

2/ Sur Windows 10 (Pro 64 bits):
************************************

DISKPART> lis dis

N° disque Statut Taille Libre Dyn GPT
--------- ------------- ------- ------- --- ---
Disque 0 En ligne 111 G octets 1024 K octets *
Disque 1 En ligne 119 G octets 0 octets * ------> dev/sdb
Disque 2 En ligne 29 G octets 0 octets *

DISKPART> sel dis 1

Le disque 1 est maintenant le disque sélectionné.

DISKPART> det dis

Generic STORAGE DEVICE USB Device
ID du disque : {75AB403F-1DC7-4D15-A87C-7A7E8F1F1F40}
Type : USB
État : En ligne
Chemin : 0
Cible : 0
ID LUN : 0
Chemin d’accès de l’emplacement : UNAVAILABLE
État en lecture seule actuel : Non
Lecture seule : Non
Disque de démarrage : Non
Disque de fichiers d’échange : Non
Disque de fichiers de mise en veille prolongée : Non
Disque de fichiers de vidage sur incident : Non
Disque en cluster : Non

N° volume Ltr Nom Fs Type Taille Statut Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 5 G FAT32 Amovible 38 G Sain

DISKPART> sel vol 5

Le volume 5 est le volume sélectionné.

DISKPART> det vol

N° disque Statut Taille Libre Dyn GPT
--------- ------------- ------- ------- --- ---
* Disque 1 En ligne 119 G octets 0 octets *

Lecture seule : Non
Caché : Non
Aucune lettre de lecteur par défaut : Non
Cliché instantané : Non
Hors connexion : Non
BitLocker chiffré : Non
Installable : Oui

Capacité du volume : 38 G octets
Espace libre du volume : 25 G octets

DISKPART>

3/ Et pourtant la partition dev/sdb n'est plus indiquée sur le menu (grub) de démarrage de ma carte mère (ni sur refind) ! (après une commande malencontreuse)

4/ Je faisait régulièrement ceci (avant la disparition de la partition Debian (sur ma clef USB en dev/sdb) du menu de démarrage)
depuis mon disque SSD (Debian 11, dev/sda) et depuis un
terminal (non tty):

1/ monnom$ su -l
Pw...
root# gdisk /dev/sdb
>>>backup header from main header.
>>>Warning! One or more CRCs don't match. You should repair the disk!
>>>Main header: OK
>>>Backup header: ERROR
>>>Main partition table: OK
>>>Backup partition table: OK

r
d
w
Y
q
root# partprobe
root# gdisk
GPT fdisk (gdisk) version 1.0.6

Type device filename, or press <Enter> to exit: /dev/sdb
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present

Found valid GPT with protective MBR; using GPT.
q
root# gdisk
GPT fdisk (gdisk) version 1.0.6

Type device filename, or press <Enter> to exit: /dev/sdb2
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present

Found valid GPT with protective MBR; using GPT.
q
root# update-grub

2/
root# umount /dev/sdb
root# e2fsck -pf /dev/sdb
/dev/sdb is in use.
e2fsck: Cannot continue, aborting.
root#
root# umount /dev/sdb2
umount: /dev/sdb2: non monté.
root#

root# e2fsck -p /dev/sdb2
e2fsck: Bad magic number in super-block while trying to open /dev/sdb2
/dev/sdb2:
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>

Found a gpt partition table in /dev/sdb2
root#
root# umount /dev/sdb2
umount: /dev/sdb2: non monté.
root# e2fsck -fn /dev/sdb2
—> résultat sur e2fsck,zip en attachement (9 Mo en .txt; 1,8 Mo en .zip)
–> fin du résultat
root# reboot

Mais rien ne change après un reboot, idem (Backup header error dans gdisk)
Comment faire pour enregistrer mes changements ?
Donc c'ést la question qui reviendra si je résous la question du démarrage.
Question qui est apparue, dans mes recherches après une commande malencontreuse dont je ne peux me rappeler !
root# history dont voilà un extrait significatif :

307 fsck -t ext4 /dev/sdb2
308 umount /dev/sdb2
309 fsck -t ext4 /dev/sdb2
310 fdisk -l /dev/sdb
311 tune2fs
312 tune2fs /dev/sdb2
313 man tune2fs
314 man tune2fs > /home/alain/tune2fs
315 dumpe2fs /dev/sdb2
316 dumpe2fs info
317 man dumpe2fs
318 e2mmpstatus /dev/sdb2
319 e2mmpstatus -h
320 e2mmpstatus /dev/sdb2
321 man 8 e2mmpstatus
322 mmp
323 e2mmpstatus
324 e2mmpstatus info
325 e2fsck
326 e2fsck -p /dev/sdb
327 umount /dev/sdb
328 umount /dev/sdb2
329 e2fsck -p /dev/sdb2
330 dumpe2fs
331 dumpe2fs info
332 dumpe2fs /dev/sdb2
333 e2fsck -p /dev/sdb2
334 gdisk
335 gdisk
336 gdisk
337 partprobe
338 gdisk
339 partprobe
340 update-grub
341 reboot
342 e2fsck -t ext4 /dev/sdb2
343 man fsck
344 gdisk
345 gdisk
346 gdisk
347 partprobe
348 gdisk
349 autopkgtest
350 su -l
351 gdisk
352 partprobe
353 gdisk
354 gdisk
355 update-grub
356 reboot
357 gdisk
358 partprobe
359 kpartx
360 apt search kpartx
361 apt install kpartx
362 kpartx -h
363 kpartx -l
364 kpartx -g
365 kpartx
366 kpartx -a
367 kpartx wholedisk
368 kpartx /dev/sdb
369 kpartx -g /dev/sdb2
370 kpartx /dev/sdb2
371 kpartx info
372 kpartxman
373 man kpartx
374 dumpe2fs /dev/sdb2
375 mke2fs -n /dev/sdb2
376 partprobe
377 update-grub
378 reboot
379 delete
380 help
381 info bash
382 cd /media
383 cd alain
384 cd 6df9d247-c676-4ae0-ab9a-15eeb8a6863d
385 ls
386 cd home
387 cd alain
388 ls
389 chmod 777 Bonjour.txt
390 delete
391 su -l
392 ls
393 cd alain
394 cd ..
395 lq
396 ls
397 cd home
398 cd alain
399 ls
400 cd ..
401 ls
402 cd alain
403 ls
404 cd Documents
405 ls
406 cd ..
407 ls
408 ls -a
409 ls
410 ls backup.gpg
411 nano bonjour.txr
412 smartctl
413 fsck -vcck /dev/sdb2
414 umount /dev/sdb2
415 umount -f /dev/sdb2
416 fuser -u /dev/sdb2
417 fuser -u /dev/sdb
418 fuser -u /dev/sda
419 fuser -m
420 fuser -a
421 fuser -a alain
422 fuser -a root
423 ls
424 fuser -a npp.8.1.4.Installer.x64.exe
425 fuser -v
426 fuser -k -i
427 umount -f /dev/sdb2
428 ps -efl | grep image
429 umount -l /PATH/OF/BUSY-DEVICE
430 umount -l /dev/sdb2
431 fsck -vcck /dev/sdb2
432 dmsestup ls
433 apt install dmsestup
434 dmsetup ls
435 lsof /dev/sdb2
436 lsof -a | grep /dev/sdb2
437 lsof -h
438 lsof -ext4
439 lsof +ext4
440 lsof -a
441 lsof -a /dev/sdb2
442 lsof -e /run/user/1000/gvfs
443 lsof -a /dev/sdb2
444 lsof -a /dev/sdb2 > /home/alain/lsof
445 lsof -a /dev/sdb2 | grep sdb
446 x=(); for a in $(mount | cut -d' ' -f3); do stat --printf= "$a" 2>/dev/null || x+=("-e$a"); done
447 lsof -a /dev/sdb2 | grep sdb
448 lsof -a /dev/sdb2
449 udo lsof ~
450 sudo lsof ~
451 gdisk
452 partprobe
453 gdisk
454 partprobe
455 kpartx
456 kpartx /dev/sdb2
457 mke2fs -n /dev/sdb2
458 mke2fs -n /dev/sdb2
459 e2fsck -p /dev/sdb2
460 e2fsck -b 8193 /dev/sdb2
461 e2fsck -b 32768 /dev/sdb2
462 e2fsck -p /dev/sdb2
463 fdisk -l
464 fdisk -h
465 fdisk -w auto /dev/sdb2

Voilà merci à vous d'avance pour vos réponses.
J'ai aussi un Pastebin (d'une session-live Boot-Repair) que je joins au message.

http://paste.ubuntu.com/p/9Jv4rMkxV9/

E-mail: mail
Pw: password

Paste from boot-repair 19 May 2022 17:56 +0000

This paste expires on 2022-06-19.

Alain Richard

Dernière modification par alainr2109 (19-05-2022 20:48:09)

alainr2109 · 20-05-2022 02:01:28

pastebin
Paste from boot-repair 19 May 2022 17:56 +0000

This paste expires on 2022-06-19.

Syntax highlighting: bash
View raw

boot-repair-4ppa200 [20220519_1754]

============================= Boot Repair Summary ==============================

The backup GPT table is corrupt, but the primary appears OK, so that will be used.

Recommended repair: ____________________________________________________________

The default repair of the Boot-Repair utility will reinstall the grub-efi of
sda6,
using the following options: sda1/boot/efi
Additional repair will be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups

rm /mnt/boot-sav/sda1/efi/Boot/bootx64.efi
mv /mnt/boot-sav/sda1/efi/Boot/bkpbootx64.efi /mnt/boot-sav/sda1/efi/Boot/bootx64.efi
rm /mnt/boot-sav/sda2/efi/Boot/bootx64.efi /mnt/boot-sav/sda2/efi/Boot/bootx64.efi.grb
rm /mnt/boot-sav/sdb1/efi/Boot/bootx64.efi /mnt/boot-sav/sdb1/efi/Boot/bootx64.efi.grb
sda6 is 97 % full
** Message: 17:55:14.711: x-terminal-emulator has very limited support, consider choose another terminal

** (pcmanfm:19124): WARNING **: 17:55:14.712: The directory '~/Templates' doesn't exist, ignoring it

(pcmanfm:19124): GLib-GIO-CRITICAL **: 17:55:14.836: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
Mount sda1 on /mnt/boot-sav/sda6/boot/efi
No sda6/boot/efi/efi/ ubuntu/mint folder

======================== Reinstall the grub-efi of sda6 ========================

chroot /mnt/boot-sav/sda6 grub-install --version
grub-install (GRUB) 2.04-20
modprobe: FATAL: Module efivars not found in directory /lib/modules/5.3.0-28-generic
chroot /mnt/boot-sav/sda6 modprobe efivars

chroot /mnt/boot-sav/sda6 efibootmgr -v before grub install
BootCurrent: 0006
Timeout: 1 seconds
BootOrder: 0006,000D,000F,0000,0012,0009,0003,0004,0013,0000,0000,0000,0014,0000
Boot0000* Windows Boot Manager HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...I................
Boot0003* UEFI: Generic STORAGE DEVICE 0819 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(3,0)/HD(1,GPT,25e9ab93-66ec-48fc-a26f-3de30896ed3b,0x800,0x100000)AMBO
Boot0004* UEFI: Generic STORAGE DEVICE 0819 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(3,0)/HD(4,GPT,5ae93cb3-c3a5-46ed-8519-e1c87047cd17,0x9f18800,0x4d2a000)AMBO
Boot0006* UEFI: Samsung Flash Drive 1100 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(4,0)/HD(2,GPT,9feb007d-9f6e-2306-93d9-2b279465c235,0x3baffd8,0x10000)AMBO
Boot0009* Hard Drive BBS(HD,,0x0)AMGOAMNO........g.G.e.n.e.r.i.c. .S.T.O.R.A.G.E. .D.E.V.I.C.E. .0.8.1.9....................A......................................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.0.8.1.9......AMBOAMNO........o.S.a.m.s.u.n.g. .F.l.a.s.h. .D.r.i.v.e. .1.1.0.0....................A...................................6..Gd-.;.A..MQ..L.0.3.7.3.3.1.6.0.1.0.0.0.4.2.3.4......AMBOAMNO........o.K.I.N.G.S.T.O.N. .S.V.3.0.0.S.3.7.A.1.2.0.G....................A...........................>..Gd-.;.A..MQ..L.0.5.2.0.B.6.7.7.8.4.1.0.5.7.D.A. . . . ......AMBO
Boot000B CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot000D* debian HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(EFIdebianshimx64.efi)
Boot000E CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot000F* rEFInd HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(EFIrefindrefind_x64.efi)
Boot0010 CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0011 CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0012* CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0013* UEFI: KINGSTON SV300S37A120G PciRoot(0x0)/Pci(0x1f,0x2)/Sata(1,65535,0)/HD(2,GPT,db662d90-b943-4d14-bda3-f6f6c4b09e2f,0x32800,0x32000)AMBO
Boot0014* UEFI OS HD(2,GPT,db662d90-b943-4d14-bda3-f6f6c4b09e2f,0x32800,0x32000)/File(EFIBOOTBOOTX64.EFI)

chroot /mnt/boot-sav/sda6 uname -r
5.3.0-28-generic

chroot /mnt/boot-sav/sda6 grub-install --efi-directory=/boot/efi --target=x86_64-efi
Installing for x86_64-efi platform.
Installation finished. No error reported.
Refind detected on sda1
df /dev/sda1
mv /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi
cp /mnt/boot-sav/sda6/boot/efi/efi/debian/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
df /dev/sda2
touch /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi.grb
cp /mnt/boot-sav/sda6/boot/efi/efi/debian/grubx64.efi /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi
df /dev/sdb1
touch /mnt/boot-sav/sdb1/EFI/Boot/bootx64.efi.grb
cp /mnt/boot-sav/sda6/boot/efi/efi/debian/grubx64.efi /mnt/boot-sav/sdb1/EFI/Boot/bootx64.efi

chroot /mnt/boot-sav/sda6 grub-install --efi-directory=/boot/efi --target=x86_64-efi
Installing for x86_64-efi platform.
Installation finished. No error reported.

chroot /mnt/boot-sav/sda6 efibootmgr -v after grub install
BootCurrent: 0006
Timeout: 1 seconds
BootOrder: 000D,0006,000F,0000,0012,0009,0003,0004,0013,0000,0000,0000,0014,0000
Boot0000* Windows Boot Manager HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...I................
Boot0003* UEFI: Generic STORAGE DEVICE 0819 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(3,0)/HD(1,GPT,25e9ab93-66ec-48fc-a26f-3de30896ed3b,0x800,0x100000)AMBO
Boot0004* UEFI: Generic STORAGE DEVICE 0819 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(3,0)/HD(4,GPT,5ae93cb3-c3a5-46ed-8519-e1c87047cd17,0x9f18800,0x4d2a000)AMBO
Boot0006* UEFI: Samsung Flash Drive 1100 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(4,0)/HD(2,GPT,9feb007d-9f6e-2306-93d9-2b279465c235,0x3baffd8,0x10000)AMBO
Boot0009* Hard Drive BBS(HD,,0x0)AMGOAMNO........g.G.e.n.e.r.i.c. .S.T.O.R.A.G.E. .D.E.V.I.C.E. .0.8.1.9....................A......................................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.0.8.1.9......AMBOAMNO........o.S.a.m.s.u.n.g. .F.l.a.s.h. .D.r.i.v.e. .1.1.0.0....................A...................................6..Gd-.;.A..MQ..L.0.3.7.3.3.1.6.0.1.0.0.0.4.2.3.4......AMBOAMNO........o.K.I.N.G.S.T.O.N. .S.V.3.0.0.S.3.7.A.1.2.0.G....................A...........................>..Gd-.;.A..MQ..L.0.5.2.0.B.6.7.7.8.4.1.0.5.7.D.A. . . . ......AMBO
Boot000B CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot000D* debian HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(EFIdebianshimx64.efi)
Boot000E CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot000F* rEFInd HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(EFIrefindrefind_x64.efi)
Boot0010 CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0011 CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0012* CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0013* UEFI: KINGSTON SV300S37A120G PciRoot(0x0)/Pci(0x1f,0x2)/Sata(1,65535,0)/HD(2,GPT,db662d90-b943-4d14-bda3-f6f6c4b09e2f,0x32800,0x32000)AMBO
Boot0014* UEFI OS HD(2,GPT,db662d90-b943-4d14-bda3-f6f6c4b09e2f,0x32800,0x32000)/File(EFIBOOTBOOTX64.EFI)

chroot /mnt/boot-sav/sda6 update-grub
Generating grub configuration file ...
Found background image: Aurore.tga
Found linux image: /boot/vmlinuz-5.10.0-14-amd64
Found initrd image: /boot/initrd.img-5.10.0-14-amd64
Found linux image: /boot/vmlinuz-5.10.0-13-amd64
Found initrd image: /boot/initrd.img-5.10.0-13-amd64
Found linux image: /boot/vmlinuz-5.10.0-12-amd64
Found initrd image: /boot/initrd.img-5.10.0-12-amd64
Found linux image: /boot/vmlinuz-5.10.0-11-amd64
Found initrd image: /boot/initrd.img-5.10.0-11-amd64
grub-probe: error: cannot find a GRUB drive for /dev/sdc2. Check your device.map.
Found Windows Boot Manager on /dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi

Unhide GRUB boot menu in sda6/boot/grub/grub.cfg

Boot successfully repaired.

You can now reboot your computer.
Please do not forget to make your UEFI firmware boot on the Debian GNU/Linux 11 (bullseye) entry (sda1/efi/debian/grubx64.efi file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\debian\grubx64.efi

============================ Boot Info After Repair ============================

=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 34
of the same hard drive for core.img. core.img is at this location and
looks for (,2)/grub. It also embeds following components:

modules
---------------------------------------------------------------------------
offsetio extcmd macho elf file setkey gettext boot bufio verifiers crypto
terminal normal datetime date mmap drivemap blocklist regexp archelp newc
vga_text relocator video chain ntldr search_label search_fs_file
search_fs_uuid search keylayouts at_keyboard pci usb usb_keyboard gcry_md5
hashsum gcry_crc gzio xzio lzopio lspci fshelp ext2 xfs acpi iso9660
gcry_sha1 div udf exfat font diskfilter raid6rec zstd btrfs ventoy read
halt video_fb vbe linux linux16 test true sleep reboot echo bitmap
bitmap_scale gfxterm video_colors trig gfxmenu videotest videoinfo
functional_test videotest_checksum video_cirrus video_bochs vga minicmd
help configfile tr biosdisk disk ls tar squash4 pbkdf2 gcry_sha512
password_pbkdf2 all_video png jpeg part_gpt part_msdos fat ntfs loopback
gfxterm_background procfs gfxterm_menu
---------------------------------------------------------------------------

sda1: __________________________________________________________________________

File system: vfat
Boot sector type: Windows 8/10/11/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/refind/refind.conf /efi/Boot/bkpbootx64.efi
/efi/Boot/bootx64.efi /efi/debian/fbx64.efi
/efi/debian/grubx64.efi /efi/debian/mmx64.efi
/efi/debian/shimx64.efi /efi/refind/refind_x64.efi
/efi/debian/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/refind/drivers_x64/ext4_x64.efi

sda2: __________________________________________________________________________

File system: vfat
Boot sector type: Windows 8/10/11/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi /efi/debian/grubx64.efi

sda3: __________________________________________________________________________

File system:
Boot sector type: -
Boot sector info:

sda4: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8 or 10
Boot files: /bootmgr /Windows/System32/winload.exe

sda5: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sda6: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Debian GNU/Linux 11 (bullseye)
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sda7: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________________________________

File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi /efi/debian/fbx64.efi
/efi/debian/grubx64.efi /efi/debian/mmx64.efi
/efi/debian/shimx64.efi /efi/debian/grub.cfg

sdb2: __________________________________________________________________________

File system:
Boot sector type: -
Boot sector info:

sdb3: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb4: __________________________________________________________________________

File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sdc1: __________________________________________________________________________

File system: exfat
Boot sector type: -
Boot sector info:
Mounting failed: fuse: mount failed: Device or resource busy

sdc2: __________________________________________________________________________

File system: iso9660
Boot sector type: Unknown
Boot sector info:
Operating System:
Boot files: /boot/grub/grub.cfg

================================ 2 OS detected =================================

OS#1: Debian GNU/Linux 11 (bullseye) on sda6
OS#2: Windows 8 or 10 on sda4

================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: 4th Generation Core Processor Family Integrated Graphics Controller from Intel Corporation
Live-session OS is Ubuntu 64-bit (Boot-Repair-Disk 64bit 20200604, bionic, x86_64)

===================================== UEFI =====================================

BIOS/UEFI firmware: F12 from American Megatrends Inc.
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.
SecureBoot disabled - SecureBoot disabled - Please report this message to boot.repair@gmail.com.
BootCurrent: 0006
Timeout: 1 seconds
BootOrder: 000D,0006,000F,0000,0012,0009,0003,0004,0013,0000,0000,0000,0014,0000
Boot0000* Windows Boot Manager HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...I................
Boot0003* UEFI: Generic STORAGE DEVICE 0819 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(3,0)/HD(1,GPT,25e9ab93-66ec-48fc-a26f-3de30896ed3b,0x800,0x100000)AMBO
Boot0004* UEFI: Generic STORAGE DEVICE 0819 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(3,0)/HD(4,GPT,5ae93cb3-c3a5-46ed-8519-e1c87047cd17,0x9f18800,0x4d2a000)AMBO
Boot0006* UEFI: Samsung Flash Drive 1100 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/USB(4,0)/HD(2,GPT,9feb007d-9f6e-2306-93d9-2b279465c235,0x3baffd8,0x10000)AMBO
Boot0009* Hard Drive BBS(HD,,0x0)AMGOAMNO........g.G.e.n.e.r.i.c. .S.T.O.R.A.G.E. .D.E.V.I.C.E. .0.8.1.9....................A......................................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.0.8.1.9......AMBOAMNO........o.S.a.m.s.u.n.g. .F.l.a.s.h. .D.r.i.v.e. .1.1.0.0....................A...................................6..Gd-.;.A..MQ..L.0.3.7.3.3.1.6.0.1.0.0.0.4.2.3.4......AMBOAMNO........o.K.I.N.G.S.T.O.N. .S.V.3.0.0.S.3.7.A.1.2.0.G....................A...........................>..Gd-.;.A..MQ..L.0.5.2.0.B.6.7.7.8.4.1.0.5.7.D.A. . . . ......AMBO
Boot000B CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot000D* debian HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(\EFI\debian\shimx64.efi)
Boot000E CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot000F* rEFInd HD(1,GPT,b438093f-268b-40f7-9d77-26cbf7ccd3dc,0x800,0x32000)/File(\EFI\refind\refind_x64.efi)
Boot0010 CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0011 CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0012* CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .B.D.D.V.D.R.W. .C.H.1.2.N.S.3.0....................A...........................>..Gd-.;.A..MQ..L.9.K.E.5.E.3.5.I.1.6. .7. . . . . . . . ......AMBO
Boot0013* UEFI: KINGSTON SV300S37A120G PciRoot(0x0)/Pci(0x1f,0x2)/Sata(1,65535,0)/HD(2,GPT,db662d90-b943-4d14-bda3-f6f6c4b09e2f,0x32800,0x32000)AMBO
Boot0014* UEFI OS HD(2,GPT,db662d90-b943-4d14-bda3-f6f6c4b09e2f,0x32800,0x32000)/File(\EFI\BOOT\BOOTX64.EFI)

88d8877ed3e6c65fe091f4fe40c8beff sda1/Boot/bkpbootx64.efi
1b236359c52f180ce9fe705cbce94703 sda1/Boot/bootx64.efi
0d240e1ce1b2b02dec9bbb162cfb94da sda1/debian/fbx64.efi
1b236359c52f180ce9fe705cbce94703 sda1/debian/grubx64.efi
f617c3c1b1bdf56909dcb8e1b996749b sda1/debian/mmx64.efi
cefed90870185ef689f004e686de8fce sda1/debian/shimx64.efi
b5a6792efe2b15152726ad49cb6f0484 sda1/refind/refind_x64.efi
1bd41042ef7c95517859160e13267d17 sda1/Microsoft/Boot/bootmgfw.efi
9098faa654aeba2787562be78aa1cd08 sda1/Microsoft/Boot/bootmgr.efi
cfead5f8061ff46784426d43f24f90b9 sda1/refind/drivers_x64/ext4_x64.efi
1b236359c52f180ce9fe705cbce94703 sda2/Boot/bootx64.efi
1b236359c52f180ce9fe705cbce94703 sda2/debian/grubx64.efi
1b236359c52f180ce9fe705cbce94703 sdb1/Boot/bootx64.efi
0d240e1ce1b2b02dec9bbb162cfb94da sdb1/debian/fbx64.efi
d9bd73f5b3c94586def91d257570ef45 sdb1/debian/grubx64.efi
f617c3c1b1bdf56909dcb8e1b996749b sdb1/debian/mmx64.efi
cefed90870185ef689f004e686de8fce sdb1/debian/shimx64.efi

============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
sdb : is-GPT, no-BIOSboot, has---ESP, usb-disk, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda5 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda6 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far

Partitions info (2/3): _________________________________________________________

sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, notwinboot
sda5 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda6 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb4 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot

Partitions info (3/3): _________________________________________________________

sda1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda5 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda6 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sdb1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb2 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb

fdisk -l (filtered): ___________________________________________________________

Disk sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Disk identifier: 8A707AB9-F82A-49F1-A0A5-7BB619DA43C8
Start End Sectors Size Type
sda1 2048 206847 204800 100M EFI System
sda2 206848 411647 204800 100M EFI System
sda3 411648 444415 32768 16M Microsoft reserved
sda4 444416 131544285 131099870 62.5G Microsoft basic data
sda5 131545088 132591615 1046528 511M Windows recovery environment
sda6 132593664 232513535 99919872 47.7G Linux filesystem
sda7 232513536 234440703 1927168 941M Linux swap
Disk sdc: 29.9 GiB, 32078036992 bytes, 62652416 sectors
Disk identifier: 05A1BDC2-2C36-3BDE-C4F5-F1DD077AF378
Start End Sectors Size Type
sdc1 2048 62586839 62584792 29.9G Microsoft basic data
sdc2 62586840 62652375 65536 32M Microsoft basic data
Disk sdb: 119.1 GiB, 127865454592 bytes, 249737216 sectors
Disk identifier: 75AB403F-1DC7-4D15-A87C-7A7E8F1F1F40
Start End Sectors Size Type
sdb1 2048 1050623 1048576 512M EFI System
sdb2 1050624 166823935 165773312 79G Linux filesystem
sdb3 247736320 249735167 1998848 976M Linux swap
sdb4 166823936 247736319 80912384 38.6G Microsoft basic data
Partition table entries are not in disk order.
Disk dm-0: 880 MiB, 922746880 bytes, 1802240 sectors
Disk identifier: 0x2c534026
Boot Start End Sectors Size Id Type
dm-0p1 * 0 1802239 1802240 880M 0 Empty
dm-0p2 964 5891 4928 2.4M ef EFI (FAT-12/16/32)
Disk zram0: 980 MiB, 1027588096 bytes, 250876 sectors
Disk zram1: 980 MiB, 1027588096 bytes, 250876 sectors
Disk zram2: 980 MiB, 1027588096 bytes, 250876 sectors
Disk zram3: 980 MiB, 1027588096 bytes, 250876 sectors

parted -lm (filtered): _________________________________________________________

sda:120GB:scsi:512:512:gpt:ATA KINGSTON SV300S3:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:211MB:105MB:fat32:EFI system partition:boot, esp;
3:211MB:228MB:16.8MB::Microsoft reserved partition:msftres;
4:228MB:67.4GB:67.1GB:ntfs:Basic data partition:msftdata;
5:67.4GB:67.9GB:536MB:ntfs::hidden, diag;
6:67.9GB:119GB:51.2GB:ext4::;
7:119GB:120GB:987MB:linux-swap(v1)::;
sdb:128GB:scsi:512:512:gpt:Generic STORAGE DEVICE:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:85.4GB:84.9GB::Bullseye_Usb:;
4:85.4GB:127GB:41.4GB:fat32:Cave:msftdata;
3:127GB:128GB:1023MB:linux-swap(v1)::;
sdc:32.1GB:scsi:512:512:gpt:Samsung Flash Drive:;
1:1049kB:32.0GB:32.0GB::Ventoy:msftdata;
2:32.0GB:32.1GB:33.6MB:fat16:VTOYEFI:hidden, msftdata;

blkid (filtered): ______________________________________________________________

NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat 8A60-15EF b438093f-268b-40f7-9d77-26cbf7ccd3dc EFI system partition
├─sda2 vfat D09C-7E96 db662d90-b943-4d14-bda3-f6f6c4b09e2f EFI system partition
├─sda3 89e651ec-bdc1-4670-b00a-e96b79802d71 Microsoft reserved partition
├─sda4 ntfs 2CC4A8D5C4A8A296 482d1324-f585-42d8-ad41-be811ab30118 Basic data partition
├─sda5 ntfs B42808A528086926 78adf595-0d76-4b5d-bb14-9ae49bbe1109
├─sda6 ext4 27e2d271-9451-4d93-9525-781b5ce0623b 4812e3a7-c27d-4347-9a11-4c91668801aa
└─sda7 swap 2137ccb5-2619-4986-93b3-5bb23a4d6f7a 8569a5c4-c836-41b0-bd66-a05228ef6866
sdb
├─sdb1 vfat 3685-A45C 25e9ab93-66ec-48fc-a26f-3de30896ed3b
├─sdb2 f6c197ca-ff66-4edf-8828-87bc5faf13ae Bullseye_Usb
├─sdb3 swap c7b4e901-398d-4dde-a748-c30d11fbd182 78340fdb-53a9-461e-87bd-78039d490f94
└─sdb4 vfat BEFC-9D1F 5ae93cb3-c3a5-46ed-8519-e1c87047cd17 Cave
sdc
├─sdc1 exfat 95F0-96C4 5c16056f-b097-2afe-5b21-b563a730be98 Ventoy Ventoy
└─sdc2 iso9660 2020-06-13-00-42-55-00 Boot-Repair-Disk 64bit

Mount points (filtered): _______________________________________________________

Avail Use% Mounted on
/dev/mapper/ventoy 0 100% /cdrom
/dev/sda1 63.5M 34% /mnt/boot-sav/sda1
/dev/sda2 92.8M 3% /mnt/boot-sav/sda2
/dev/sda4 22.7G 64% /mnt/boot-sav/sda4
/dev/sda5 88.6M 83% /mnt/boot-sav/sda5
/dev/sda6 1.4G 92% /mnt/boot-sav/sda6
/dev/sdb1 507.5M 1% /mnt/boot-sav/sdb1
/dev/sdb4 26G 33% /media/lubuntu/BEFC-9D1F
/dev/sdc2 0 100% /media/lubuntu/Boot-Repair-Disk 64bit

Mount options (filtered): ______________________________________________________

/dev/mapper/ventoy iso9660 ro,noatime,nojoliet,check=s,map=n,blocksize=2048
/dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda2 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda4 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda5 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda6 ext4 rw,relatime
/dev/sdb1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sdb4 vfat rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro
/dev/sdc2 iso9660 ro,nosuid,nodev,relatime,nojoliet,check=s,map=n,blocksize=2048

==================== sda1/EFI/refind/refind.conf (filtered) ====================

timeout 20
menuentry Linux {
icon EFI/refind/icons/os_linux.png
volume 904404F8-B481-440C-A1E3-11A5A954E601
loader bzImage-3.3.0-rc7
initrd initrd-3.3.0.img
options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
disabled
}
menuentry "Arch Linux" {
icon /EFI/refind/icons/os_arch.png
volume "Arch Linux"
loader /boot/vmlinuz-linux
initrd /boot/initramfs-linux.img
options "root=PARTUUID=5028fa50-0079-4c40-b240-abfaf28693ea rw add_efi_memmap"
submenuentry "Boot using fallback initramfs" {
initrd /boot/initramfs-linux-fallback.img
}
submenuentry "Boot to terminal" {
add_options "systemd.unit=multi-user.target"
}
disabled
}
menuentry Ubuntu {
loader /EFI/ubuntu/grubx64.efi
icon /EFI/refind/icons/os_linux.png
disabled
}
menuentry "ELILO" {
loader \EFI\elilo\elilo.efi
disabled
}
menuentry "Windows 7" {
loader \EFI\Microsoft\Boot\bootmgfw.efi
disabled
}
menuentry "Windows via shell script" {
icon \EFI\refind\icons\os_win.png
loader \EFI\tools\shell.efi
options "fs0:\EFI\tools\launch_windows.nsh"
disabled
}
menuentry "My macOS" {
icon \EFI\refind\icons\os_mac.png
volume "macOS boot"
loader \System\Library\CoreServices\boot.efi
disabled
}

===================== sda1/efi/debian/grub.cfg (filtered) ======================

search.fs_uuid 27e2d271-9451-4d93-9525-781b5ce0623b root hd0,gpt6
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

====================== sda6/boot/grub/grub.cfg (filtered) ======================

Debian GNU/Linux 27e2d271-9451-4d93-9525-781b5ce0623b
Debian GNU/Linux, with Linux 5.10.0-14-amd64 27e2d271-9451-4d93-9525-781b5ce0623b
Debian GNU/Linux, with Linux 5.10.0-13-amd64 27e2d271-9451-4d93-9525-781b5ce0623b
Debian GNU/Linux, with Linux 5.10.0-12-amd64 27e2d271-9451-4d93-9525-781b5ce0623b
Debian GNU/Linux, with Linux 5.10.0-11-amd64 27e2d271-9451-4d93-9525-781b5ce0623b
Windows Boot Manager (on sda1) osprober-efi-8A60-15EF
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda6/etc/fstab (filtered) ===========================

# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=27e2d271-9451-4d93-9525-781b5ce0623b / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8A60-15EF /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda6 during installation
UUID=2137ccb5-2619-4986-93b3-5bb23a4d6f7a none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
tmpfs /ramdisk tmpfs rw,size=3600M 0 0
/dev/sdb2 / ext4 defaults

======================= sda6/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false

==================== sda6: Location of files loaded by Grub ====================

GiB - GB File Fragment(s)
63.225593567 = 67.887964160 boot/grub/grub.cfg 1
91.821796417 = 98.592903168 boot/vmlinuz-5.10.0-11-amd64 2
90.919452667 = 97.624018944 boot/vmlinuz-5.10.0-12-amd64 2
73.198238373 = 78.596009984 boot/vmlinuz-5.10.0-13-amd64 2
108.688987732 = 116.703911936 boot/vmlinuz-5.10.0-14-amd64 1
108.688987732 = 116.703911936 vmlinuz 1
73.198238373 = 78.596009984 vmlinuz.old 2
98.819252014 = 106.106363904 boot/initrd.img-5.10.0-11-amd64 4
101.913082123 = 109.428338688 boot/initrd.img-5.10.0-12-amd64 5
101.940425873 = 109.457698816 boot/initrd.img-5.10.0-13-amd64 62
105.035739899 = 112.781266944 boot/initrd.img-5.10.0-14-amd64 1
105.035739899 = 112.781266944 initrd.img 1
101.940425873 = 109.457698816 initrd.img.old 62

===================== sda6: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 13664 Jul 10 2021 10_linux
-rwxr-xr-x 1 root root 13726 Jul 10 2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 Jul 10 2021 30_os-prober
-rwxr-xr-x 1 root root 1416 Jul 10 2021 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jul 10 2021 40_custom
-rwxr-xr-x 1 root root 216 Jul 10 2021 41_custom

===================== sdb1/efi/debian/grub.cfg (filtered) ======================

search.fs_uuid 6df9d247-c676-4ae0-ab9a-15eeb8a6863d root hd2,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

====================== sdc2/boot/grub/grub.cfg (filtered) ======================

==================== sdc2: Location of files loaded by Grub ====================

GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1

raleur · 20-05-2022 08:43:44

alainr2109 a écrit :

Voilà mon problème:

Non, ceci n'est pas l'exposé d'un problème mais un tas d'informations balancées en vrac sans explication. Tu crois vraiment que quelqu'un va se farcir tout ça ?

Quel est le VRAI problème ?

plegrand · 20-05-2022 08:55:13

Heu... il est où le problème il est où !!!!
La flemme de lire tout ça

alainr2109 · 20-05-2022 12:15:33

Bonjour,

Alors, j'ai sans doute procédé en désordre.
Le problème (actuel mais issu d'un autre), c'est que je n'ai plus accès à la partition Debian (Bullseye) que j'ai installé sur une clé usb de 120 Go.

Au départ j'ai constaté une erreur, via gdisk, qui disait ceci:

root# gdisk /dev/sdb

Caution: invalid backup GPT header, but valid main header; regenerating
backup header from main header.

Warning! One or more CRCs don't match. You should repair the disk!

>>>backup header from main header.
>>>Warning! One or more CRCs don't match. You should repair the disk!
>>>Main header: OK
>>>Backup header: ERROR
>>>Main partition table: OK
>>>Backup partition table: OK

Là dessus, je fais une réparation du Backup header avec les commandes r,d,w,Y
je fais un partprobe, je relance gdisk et il me donne:

root# gdisk
GPT fdisk (gdisk) version 1.0.6

Type device filename, or press <Enter> to exit: /dev/sdb
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present

Found valid GPT with protective MBR; using GPT.

Je fais un update du grub (update-grub)
puis un reboot

Et là rebelote, rien n'a changé

Et donc, en bon ignorant, j'ai cherché, le plus prudemment possible, des tas de commandes, en posant des questions sur le moteur google.
Et à mon avis, il y en a une qui m'a bousillé l'accès à ma partition usb (/dev/sdb2), que je ne vois plus sur le menu grub de démarrage.
Sur refind, il me montre un accès, mais qui me donne seulement un prompt grub-rescue que je ne sais pas utiliser.

J'ai un pastebin d'une session boot-repair, si ça peut aider...
Voilà, en résumé

J'espère avoir été plus clair et
attend une réponse de vos esprits éclairés

Merci

Alain

raleur · 20-05-2022 13:13:08

Quel format est censée avoir cette partition sdb2 ? ext4 ? LVM ? Autre ?
Voyons ce qui est détecté :

file -sk /dev/sdb2

wipefs /dev/sdb2

blkid /dev/sdb2

alainr2109 · 20-05-2022 19:51:07

root@debianal1:~# file -sk /dev/sdb2
/dev/sdb2: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,2), end-CHS (0x3ff,255,63), startsector 1, 165773311 sectors, extended partition table (last)\012- DOS/MBR boot sector\012- GPT partition table, version 1.0, GUID: b849486e-4eea-45ea-b86f-1cd984e2d1ac, disk size: 165773312 sectors\012- of 512 bytes\012- (Lepton 2.x), scale 0-0, spot sensor temperature 0.000000, unit celsius, color scheme 0, calibration: offset 0.000000, slope 0.000000\012- data
root@debianal1:~#

root@debianal1:~# wipefs /dev/sdb2
DEVICE OFFSET TYPE UUID LABEL
sdb2 0x200 gpt
sdb2 0x13c2fffe00 gpt
sdb2 0x1fe PMBR
root@debianal1:~#

root@debianal1:~# blkid /dev/sdb2
/dev/sdb2: PTUUID="b849486e-4eea-45ea-b86f-1cd984e2d1ac" PTTYPE="gpt" PARTLABEL="Bullseye_Usb" PARTUUID="f6c197ca-ff66-4edf-8828-87bc5faf13ae"
root@debianal1:~#

Pour moi, la partition est en ext4

Dernière modification par alainr2109 (20-05-2022 19:52:20)

raleur · 20-05-2022 22:20:59

Les résultats de ces trois commandes indiquent que la partition contient une table de partition GPT, ce qui est incompatible avec un système de fichiers ext4 en plus de n'avoir aucun sens. Probablement le résultat d'une mauvaise commande fdisk appliquée à sdb2 au lieu de sdb. Cela a écrasé les 34 premiers secteurs de la partition, incluant notamment le superbloc ext4 principal, et les 33 derniers. Je vois dans l'historique que tu as déjà essayé de réparer le système de fichiers avec un superbloc de secours :

alainr2109 a écrit :

458 mke2fs -n /dev/sdb2
459 e2fsck -p /dev/sdb2
460 e2fsck -b 8193 /dev/sdb2
461 e2fsck -b 32768 /dev/sdb2

Qu'ont donné ces commandes ?

Dernière modification par raleur (20-05-2022 22:22:39)

alainr2109 · 21-05-2022 09:56:30

Bonjour,

root@debianal1:~# mke2fs -n /dev/sdb2
mke2fs 1.46.2 (28-Feb-2021)
Found a gpt partition table in /dev/sdb2
Proceed anyway? (y,N) y
Creating filesystem with 20721664 4k blocks and 5185536 inodes
Filesystem UUID: 809d77b2-4743-476d-bf97-3b4c6e488f54
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000
root@debianal1:~#

root@debianal1:~# e2fsck -p /dev/sdb2
e2fsck: Bad magic number in super-block while trying to open /dev/sdb2
/dev/sdb2:
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
Found a gpt partition table in /dev/sdb2
root@debianal1:~#

root@debianal1:~# e2fsck -b 8193 /dev/sdb2
e2fsck 1.46.2 (28-Feb-2021)
e2fsck: Bad magic number in super-block while trying to open /dev/sdb2

The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
Found a gpt partition table in /dev/sdb2
root@debianal1:~#

root@debianal1:~# e2fsck -b 8193 /dev/sdb2
e2fsck 1.46.2 (28-Feb-2021)
e2fsck: Bad magic number in super-block while trying to open /dev/sdb2

The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>

Found a gpt partition table in /dev/sdb2
root@debianal1:~# e2fsck -b 32768 /dev/sdb2
e2fsck 1.46.2 (28-Feb-2021)
/dev/sdb2: recovering journal
e2fsck: unable to set superblock flags on /dev/sdb2

/dev/sdb2: ***** FILE SYSTEM WAS MODIFIED *****

/dev/sdb2: ********** WARNING: Filesystem still has errors **********

root@debianal1:~#

PS: Je ne comprends pas pourquoi une partition GPT est incompatible avec un système de fichiers ext4 ?

Dernière modification par alainr2109 (21-05-2022 09:59:09)

raleur · 21-05-2022 10:16:06

alainr2109 a écrit :

# e2fsck -b 32768 /dev/sdb2
e2fsck 1.46.2 (28-Feb-2021)
/dev/sdb2: recovering journal
e2fsck: unable to set superblock flags on /dev/sdb2

Avec le bon offset e2fsck détecte le système de fichiers mais je ne comprends pas le dernier message.
Déjà tu peux effacer cette table de partition GPT qui n'a rien à faire là :

dd if=/dev/zero of=/dev/sdb2 bs=1024 count=1

Qu'est-ce que ça donne ensuite si tu répètes la commande e2fsck ?

alainr2109 a écrit :

Je ne comprends pas pourquoi une partition GPT est incompatible avec un système de fichiers ext4 ?

Les deux ne peuvent pas coexister au même endroit. C'est comme si tu voulais mettre un système de fichiers ext4 et un swap dans la même partition. L'un va écraser l'autre.
En plus on ne met pas une table de partition dans une partition, sauf cas particulier de la partition étendue DOS (qui ne contient alors rien d'autre).

alainr2109 · 21-05-2022 21:40:16

Mais si j'exécute la commande "dd if=/dev/zero of=/dev/sdb2 bs=1024 count=1" , ne vais-je pas effacer mes données ?

Car j'ai des données à récupérer, sinon j'aurais plus qu'à formater et réinstaller !

(voir fin de fichier)
----------------------------------------------------------------------------------------------------------------------
D'autre part, j'ai aussi modifié /etc/fstab lors de mes recherches
(ce qui me permet de monter /dev/sdb2) (Peut-être cela a-t-il eu une influence sur la modification du menu grub de démarrage ?)

# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=27e2d271-9451-4d93-9525-781b5ce0623b / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8A60-15EF /boot/efi vfat umask=0077 0 1de démarrage
# swap was on /dev/sda6 during installation
UUID=2137ccb5-2619-4986-93b3-5bb23a4d6f7a none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
tmpfs /ramdisk tmpfs rw,size=3600M 0 0
/dev/sdb2 / ext4 defaults

-----------------------------------------------------------------------------------------------------------------------
---->

root@debianal1:~# dd if=/dev/zero of=/dev/sdb2 bs=1024 count=1
1+0 enregistrements lus
1+0 enregistrements écrits
1024 octets (1,0 kB, 1,0 KiB) copiés, 0,00128331 s, 798 kB/s
root@debianal1:~# e2fsck -b 32768 /dev/sdb2
e2fsck 1.46.2 (28-Feb-2021)
/dev/sdb2: recovering journal
e2fsck: unable to set superblock flags on /dev/sdb2

/dev/sdb2: ***** FILE SYSTEM WAS MODIFIED *****

/dev/sdb2: ********** WARNING: Filesystem still has errors **********

root@debianal1:~#

Et maintenant, un gdisk /dev/sdb i répond; "no partition"

Dernière modification par alainr2109 (22-05-2022 01:17:38)

raleur · 22-05-2022 09:36:27

alainr2109 a écrit :

Mais si j'exécute la commande "dd if=/dev/zero of=/dev/sdb2 bs=1024 count=1" , ne vais-je pas effacer mes données ?

Non, cette commande n'efface que les premiers 1024 octets de la partition, qui ne sont pas utilisés par ext4 car réservés à un éventuel programme d'amorce, et contiennent la signature de la table de partition GPT.

alainr2109 a écrit :

D'autre part, j'ai aussi modifié /etc/fstab lors de mes recherches
(ce qui me permet de monter /dev/sdb2)

Donc la partition peut être montée malgré les messages d'e2fsck ? C'est un progrès.

alainr2109 a écrit :

Peut-être cela a-t-il eu une influence sur la modification du menu grub de démarrage ?

En principe non, sauf si le pilote ext2 de GRUB ne peut toujours pas monter la partition. Si la partition n'est pas déjà montée lors de l'exécution d'update-grub, elle est montée temporairement avec grub-mount en utilisant le pilote ext2 de GRUB via FUSE pour être examinée. Si elle est déjà montée par le noyau, alors c'est naturellement le pilote ext4 du noyau Linux qui est utilisé.

J'ai un doute sur l'état de santé de la clé USB. Il faudrait vérifier s'il y a des messages d'erreur relatifs à sdb dans les logs du noyau avec dmesg, et lancer badblocks sur /dev/sdb pour détecter d'éventels secteurs défectueux.

Dernière modification par raleur (22-05-2022 09:38:52)

alainr2109 · 23-05-2022 02:51:57

Résultat de badblocks /dev/sdb

les chiffres défilent à l'écran et ne s'arrètent pas (certaines zones de blocs sont sélectionnées)

J'ai refait un gdisk et voilà le résultat (!):

root@debianal1:~# gdisk
GPT fdisk (gdisk) version 1.0.6

Type device filename, or press <Enter> to exit: /dev/sdb
Problem opening /dev/sdb for reading! Error is 2.
The specified file does not exist! !!!!!!!!!!!!!!!!!!!!!!!!!!!!
root@debianal1:~#

Mais le système a changé de lettre (vu avec gparted)

root@debianal1:~# gdisk
GPT fdisk (gdisk) version 1.0.6

Type device filename, or press <Enter> to exit: /dev/sdc
Caution: invalid backup GPT header, but valid main header; regenerating
backup header from main header.

Warning! One or more CRCs don't match. You should repair the disk!
Main header: OK
Backup header: ERROR
Main partition table: OK
Backup partition table: OK

Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: damaged

****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************

Command (? for help):

Et le résultat de dmesg (c'est long):

root@debianal1:~# dmesg
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Linux version 5.10.0-14-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.113-1 (2022-04-29)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-amd64 root=UUID=27e2d271-9451-4d93-9525-781b5ce0623b ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c837cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c837d000-0x00000000c8383fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c8384000-0x00000000c8cbdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8cbe000-0x00000000c8f3afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8f3b000-0x00000000da25dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da25e000-0x00000000da5cbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da5cc000-0x00000000da609fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da60a000-0x00000000da6cdfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da6ce000-0x00000000daf7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daf7f000-0x00000000daffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda69a000 ACPI 2.0=0xda69a000 SMBIOS=0xf04c0 MOKvar=0xd7bc0000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. B85M-HD3/B85M-HD3, BIOS F12 08/13/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3492.082 MHz processor
[ 0.000482] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000484] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000489] last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000492] MTRR default type: uncachable
[ 0.000493] MTRR fixed ranges enabled:
[ 0.000494] 00000-9FFFF write-back
[ 0.000495] A0000-BFFFF uncachable
[ 0.000495] C0000-CFFFF write-protect
[ 0.000496] D0000-DFFFF uncachable
[ 0.000496] E0000-FFFFF write-protect
[ 0.000497] MTRR variable ranges enabled:
[ 0.000498] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000499] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000500] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000500] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000501] 4 base 00DB800000 mask 7FFF800000 uncachable
[ 0.000501] 5 base 021F000000 mask 7FFF000000 uncachable
[ 0.000502] 6 base 021E800000 mask 7FFF800000 uncachable
[ 0.000503] 7 base 021E600000 mask 7FFFE00000 uncachable
[ 0.000503] 8 disabled
[ 0.000504] 9 disabled
[ 0.000764] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000962] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000967] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.006786] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef]
[ 0.006801] e820: update [mem 0xd7bc0000-0xd7bc3fff] usable ==> reserved
[ 0.006823] Using GB pages for direct mapping
[ 0.007357] RAMDISK: [mem 0x324bb000-0x35254fff]
[ 0.007360] ACPI: Early table checksum verification disabled
[ 0.007362] ACPI: RSDP 0x00000000DA69A000 000024 (v02 ALASKA)
[ 0.007365] ACPI: XSDT 0x00000000DA69A078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007369] ACPI: FACP 0x00000000DA6A6E18 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.007372] ACPI: DSDT 0x00000000DA69A188 00CC8D (v02 ALASKA A M I 00000088 INTL 20091112)
[ 0.007375] ACPI: FACS 0x00000000DA6CC080 000040
[ 0.007376] ACPI: APIC 0x00000000DA6A6F28 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.007378] ACPI: FPDT 0x00000000DA6A6FA0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007381] ACPI: SSDT 0x00000000DA6A6FE8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.007383] ACPI: SSDT 0x00000000DA6A7528 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.007385] ACPI: MCFG 0x00000000DA6A8000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.007387] ACPI: HPET 0x00000000DA6A8040 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.007389] ACPI: SSDT 0x00000000DA6A8078 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.007392] ACPI: SSDT 0x00000000DA6A83E8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.007394] ACPI: BGRT 0x00000000DA6AB8D0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.007396] ACPI: Reserving FACP table memory at [mem 0xda6a6e18-0xda6a6f23]
[ 0.007397] ACPI: Reserving DSDT table memory at [mem 0xda69a188-0xda6a6e14]
[ 0.007398] ACPI: Reserving FACS table memory at [mem 0xda6cc080-0xda6cc0bf]
[ 0.007398] ACPI: Reserving APIC table memory at [mem 0xda6a6f28-0xda6a6f99]
[ 0.007399] ACPI: Reserving FPDT table memory at [mem 0xda6a6fa0-0xda6a6fe3]
[ 0.007400] ACPI: Reserving SSDT table memory at [mem 0xda6a6fe8-0xda6a7520]
[ 0.007401] ACPI: Reserving SSDT table memory at [mem 0xda6a7528-0xda6a7fff]
[ 0.007401] ACPI: Reserving MCFG table memory at [mem 0xda6a8000-0xda6a803b]
[ 0.007402] ACPI: Reserving HPET table memory at [mem 0xda6a8040-0xda6a8077]
[ 0.007403] ACPI: Reserving SSDT table memory at [mem 0xda6a8078-0xda6a83e4]
[ 0.007404] ACPI: Reserving SSDT table memory at [mem 0xda6a83e8-0xda6ab8c8]
[ 0.007405] ACPI: Reserving BGRT table memory at [mem 0xda6ab8d0-0xda6ab907]
[ 0.007412] ACPI: Local APIC address 0xfee00000
[ 0.007448] No NUMA configuration found
[ 0.007448] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[ 0.007457] NODE_DATA(0) allocated [mem 0x21e5d5000-0x21e5fefff]
[ 0.007692] Zone ranges:
[ 0.007693] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007694] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007695] Normal [mem 0x0000000100000000-0x000000021e5fffff]
[ 0.007696] Device empty
[ 0.007697] Movable zone start for each node
[ 0.007699] Early memory node ranges
[ 0.007700] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.007701] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.007701] node 0: [mem 0x0000000000100000-0x00000000c837cfff]
[ 0.007702] node 0: [mem 0x00000000c8384000-0x00000000c8cbdfff]
[ 0.007702] node 0: [mem 0x00000000c8f3b000-0x00000000da25dfff]
[ 0.007703] node 0: [mem 0x00000000da5cc000-0x00000000da609fff]
[ 0.007703] node 0: [mem 0x00000000dafff000-0x00000000daffffff]
[ 0.007704] node 0: [mem 0x0000000100000000-0x000000021e5fffff]
[ 0.007706] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
[ 0.007707] On node 0 totalpages: 2065846
[ 0.007708] DMA zone: 64 pages used for memmap
[ 0.007708] DMA zone: 28 pages reserved
[ 0.007709] DMA zone: 3997 pages, LIFO batch:0
[ 0.007710] DMA32 zone: 13889 pages used for memmap
[ 0.007710] DMA32 zone: 888857 pages, LIFO batch:63
[ 0.007711] Normal zone: 18328 pages used for memmap
[ 0.007711] Normal zone: 1172992 pages, LIFO batch:63
[ 0.007713] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007714] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007741] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.014098] On node 0, zone DMA32: 7 pages in unavailable ranges
[ 0.014656] On node 0, zone DMA32: 637 pages in unavailable ranges
[ 0.014664] On node 0, zone DMA32: 878 pages in unavailable ranges
[ 0.014691] On node 0, zone DMA32: 2549 pages in unavailable ranges
[ 0.015117] On node 0, zone Normal: 20480 pages in unavailable ranges
[ 0.015172] On node 0, zone Normal: 6656 pages in unavailable ranges
[ 0.015178] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.015243] ACPI: PM-Timer IO Port: 0x1808
[ 0.015245] ACPI: Local APIC address 0xfee00000
[ 0.015249] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.015257] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.015258] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.015259] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.015260] ACPI: IRQ0 used by override.
[ 0.015261] ACPI: IRQ9 used by override.
[ 0.015262] Using ACPI (MADT) for SMP configuration information
[ 0.015264] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.015272] e820: update [mem 0xce170000-0xce184fff] usable ==> reserved
[ 0.015280] TSC deadline timer available
[ 0.015281] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.015301] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.015303] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.015304] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.015305] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.015306] PM: hibernation: Registered nosave memory: [mem 0xc837d000-0xc8383fff]
[ 0.015308] PM: hibernation: Registered nosave memory: [mem 0xc8cbe000-0xc8f3afff]
[ 0.015309] PM: hibernation: Registered nosave memory: [mem 0xce170000-0xce184fff]
[ 0.015310] PM: hibernation: Registered nosave memory: [mem 0xd7bc0000-0xd7bc3fff]
[ 0.015312] PM: hibernation: Registered nosave memory: [mem 0xda25e000-0xda5cbfff]
[ 0.015313] PM: hibernation: Registered nosave memory: [mem 0xda60a000-0xda6cdfff]
[ 0.015314] PM: hibernation: Registered nosave memory: [mem 0xda6ce000-0xdaf7efff]
[ 0.015314] PM: hibernation: Registered nosave memory: [mem 0xdaf7f000-0xdaffefff]
[ 0.015316] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.015316] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[ 0.015317] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.015317] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.015318] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.015318] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.015319] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.015319] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.015320] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.015320] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.015321] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.015321] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.015322] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.015322] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.015324] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.015325] Booting paravirtualized kernel on bare hardware
[ 0.015327] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.018329] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018497] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u524288
[ 0.018503] pcpu-alloc: s200536 r8192 d28840 u524288 alloc=1*2097152
[ 0.018504] pcpu-alloc: [0] 0 1 2 3
[ 0.018530] Built 1 zonelists, mobility grouping on. Total pages: 2033537
[ 0.018531] Policy zone: Normal
[ 0.018532] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-amd64 root=UUID=27e2d271-9451-4d93-9525-781b5ce0623b ro quiet
[ 0.018903] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.019077] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.019114] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.032302] Memory: 3385096K/8263384K available (12295K kernel code, 2545K rwdata, 7572K rodata, 2416K init, 3672K bss, 496936K reserved, 0K cma-reserved)
[ 0.032308] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[ 0.032398] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.032408] Kernel/User page tables isolation: enabled
[ 0.032419] ftrace: allocating 36462 entries in 143 pages
[ 0.041706] ftrace: allocated 143 pages with 5 groups
[ 0.041791] rcu: Hierarchical RCU implementation.
[ 0.041792] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.041793] Rude variant of Tasks RCU enabled.
[ 0.041793] Tracing variant of Tasks RCU enabled.
[ 0.041794] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.041795] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.044466] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.044731] random: crng done (trusting CPU's manufacturer)
[ 0.044747] Console: colour dummy device 80x25
[ 0.044758] printk: console [tty0] enabled
[ 0.044770] ACPI: Core revision 20200925
[ 0.044848] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.044858] APIC: Switch to symmetric I/O mode setup
[ 0.045169] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064857] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3256194361c, max_idle_ns: 440795293141 ns
[ 0.064860] Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.16 BogoMIPS (lpj=13968328)
[ 0.064862] pid_max: default: 32768 minimum: 301
[ 0.069638] LSM: Security Framework initializing
[ 0.069647] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.069670] AppArmor: AppArmor initialized
[ 0.069671] TOMOYO Linux initialized
[ 0.069695] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.069708] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.069915] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.069924] process: using mwait in idle threads
[ 0.069926] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.069926] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.069929] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.069930] Spectre V2 : Mitigation: Retpolines
[ 0.069930] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.069931] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.069932] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.069932] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.069933] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.069935] SRBDS: Mitigation: Microcode
[ 0.069936] MDS: Mitigation: Clear CPU buffers
[ 0.070025] Freeing SMP alternatives memory: 32K
[ 0.072924] smpboot: CPU0: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.073043] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.073064] ... version: 3
[ 0.073064] ... bit width: 48
[ 0.073065] ... generic registers: 4
[ 0.073065] ... value mask: 0000ffffffffffff
[ 0.073066] ... max period: 00007fffffffffff
[ 0.073066] ... fixed-purpose events: 3
[ 0.073066] ... event mask: 000000070000000f
[ 0.073144] rcu: Hierarchical SRCU implementation.
[ 0.073562] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.073603] smp: Bringing up secondary CPUs ...
[ 0.073662] x86: Booting SMP configuration:
[ 0.073663] .... node #0, CPUs: #1 #2
[ 0.075374] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/ … n/mds.html for more details.
[ 0.075374] #3
[ 0.075374] smp: Brought up 1 node, 4 CPUs
[ 0.075374] smpboot: Max logical packages: 1
[ 0.075374] smpboot: Total of 4 processors activated (27936.65 BogoMIPS)
[ 0.085475] node 0 deferred pages initialised in 8ms
[ 0.085498] devtmpfs: initialized
[ 0.085498] x86/mm: Memory block size: 128MB
[ 0.085498] PM: Registering ACPI NVS region [mem 0xc837d000-0xc8383fff] (28672 bytes)
[ 0.085498] PM: Registering ACPI NVS region [mem 0xda60a000-0xda6cdfff] (802816 bytes)
[ 0.085498] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.085498] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.085498] pinctrl core: initialized pinctrl subsystem
[ 0.085498] NET: Registered protocol family 16
[ 0.085498] audit: initializing netlink subsys (disabled)
[ 0.085498] audit: type=2000 audit(1653263248.040:1): state=initialized audit_enabled=0 res=1
[ 0.085498] thermal_sys: Registered thermal governor 'fair_share'
[ 0.085498] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.085498] thermal_sys: Registered thermal governor 'step_wise'
[ 0.085498] thermal_sys: Registered thermal governor 'user_space'
[ 0.085498] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.085498] cpuidle: using governor ladder
[ 0.085498] cpuidle: using governor menu
[ 0.085498] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.085498] ACPI: bus type PCI registered
[ 0.085498] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.085498] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.085498] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.085498] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.085498] PCI: Using configuration type 1 for base access
[ 0.085498] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.085498] Kprobes globally optimized
[ 0.085498] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.085498] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.193374] ACPI: Added _OSI(Module Device)
[ 0.193374] ACPI: Added _OSI(Processor Device)
[ 0.193374] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.193374] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.193374] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.193374] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.193374] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.200740] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.201569] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.202145] ACPI: Dynamic OEM Table Load:
[ 0.202149] ACPI: SSDT 0xFFFF9B52D6340800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.202696] ACPI: Dynamic OEM Table Load:
[ 0.202699] ACPI: SSDT 0xFFFF9B52C9F87000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.203268] ACPI: Dynamic OEM Table Load:
[ 0.203271] ACPI: SSDT 0xFFFF9B52D6346400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.204388] ACPI: Interpreter enabled
[ 0.204409] ACPI: (supports S0 S3 S4 S5)
[ 0.204410] ACPI: Using IOAPIC for interrupt routing
[ 0.204430] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.204693] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.210708] ACPI: Power Resource [FN00] (off)
[ 0.210754] ACPI: Power Resource [FN01] (off)
[ 0.210798] ACPI: Power Resource [FN02] (off)
[ 0.210841] ACPI: Power Resource [FN03] (off)
[ 0.210885] ACPI: Power Resource [FN04] (off)
[ 0.211371] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.211374] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.211534] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.211624] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.211624] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.211890] PCI host bridge to bus 0000:00
[ 0.211892] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.211893] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.211894] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.211894] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.211895] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.211896] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.211897] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.211897] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.211898] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.211907] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.211967] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000
[ 0.211974] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.211979] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.211982] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.211991] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.212046] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.212051] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[ 0.212132] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.212145] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.212194] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.212254] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.212268] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1f000-0xf7d1f00f 64bit]
[ 0.212319] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.212370] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 0.212380] pci 0000:00:16.3: reg 0x10: [io 0xf0c0-0xf0c7]
[ 0.212384] pci 0000:00:16.3: reg 0x14: [mem 0xf7d1d000-0xf7d1dfff]
[ 0.212480] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.212493] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c3ff]
[ 0.212562] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.212627] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.212639] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[ 0.212691] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.212749] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.212813] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.212912] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.212975] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.213067] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.213130] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.213226] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.213239] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
[ 0.213309] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.213372] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
[ 0.213511] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.213521] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.213526] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.213531] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.213537] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.213542] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.213547] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d1a000-0xf7d1a7ff]
[ 0.213575] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.213627] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.213640] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit]
[ 0.213656] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.213751] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.213813] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.213832] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.213857] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.213873] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.213966] pci 0000:02:00.0: supports D1 D2
[ 0.213967] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214069] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.214072] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.214074] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.214077] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.214135] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[ 0.214263] pci 0000:03:00.0: supports D1 D2
[ 0.214264] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214314] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.214357] pci_bus 0000:04: extended config space not accessible
[ 0.214431] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.215035] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.215069] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.215101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.215133] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.215163] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.215195] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.215227] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.215258] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.215525] iommu: Default domain type: Translated
[ 0.216868] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.216868] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.216868] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.216868] vgaarb: loaded
[ 0.216909] EDAC MC: Ver: 3.0.0
[ 0.216960] Registered efivars operations
[ 0.216960] NetLabel: Initializing
[ 0.216960] NetLabel: domain hash size = 128
[ 0.216960] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.216963] NetLabel: unlabeled traffic allowed by default
[ 0.216964] PCI: Using ACPI for IRQ routing
[ 0.217019] PCI: pci_cache_line_size set to 64 bytes
[ 0.217060] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.217061] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.217061] e820: reserve RAM buffer [mem 0xc837d000-0xcbffffff]
[ 0.217062] e820: reserve RAM buffer [mem 0xc8cbe000-0xcbffffff]
[ 0.217063] e820: reserve RAM buffer [mem 0xce170000-0xcfffffff]
[ 0.217063] e820: reserve RAM buffer [mem 0xd7bc0000-0xd7ffffff]
[ 0.217064] e820: reserve RAM buffer [mem 0xda25e000-0xdbffffff]
[ 0.217065] e820: reserve RAM buffer [mem 0xda60a000-0xdbffffff]
[ 0.217066] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.217067] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[ 0.217558] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.217563] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.220875] clocksource: Switched to clocksource tsc-early
[ 0.227911] VFS: Disk quotas dquot_6.6.0
[ 0.227923] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.228004] AppArmor: AppArmor Filesystem Enabled
[ 0.228016] pnp: PnP ACPI init
[ 0.228096] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.228100] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.228223] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.228225] system 00:01: [io 0xffff] has been reserved
[ 0.228225] system 00:01: [io 0xffff] has been reserved
[ 0.228226] system 00:01: [io 0xffff] has been reserved
[ 0.228227] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.228228] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.228229] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.228230] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.228230] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.228231] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.228234] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228247] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228279] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.228281] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.228368] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.228369] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.228370] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.228372] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228396] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.228555] pnp 00:06: [dma 0 disabled]
[ 0.228580] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.228772] pnp 00:07: [dma 0 disabled]
[ 0.228843] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.228883] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.228885] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229159] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.229160] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.229160] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.229161] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.229162] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.229163] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.229164] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.229165] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.229166] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.229167] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.229168] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.229169] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.229171] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229322] pnp: PnP ACPI: found 10 devices
[ 0.234624] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.234665] NET: Registered protocol family 2
[ 0.234728] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.235661] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.235693] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.235784] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.235839] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.235871] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.235889] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.235927] NET: Registered protocol family 1
[ 0.235930] NET: Registered protocol family 44
[ 0.235941] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.235951] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.235953] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.235956] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.235958] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.235962] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.235980] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.235988] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.235989] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.235990] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.235991] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.235992] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.235992] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.235993] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.235994] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
[ 0.235995] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.235996] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.235996] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.236077] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.236429] PCI: CLS 64 bytes, default 64
[ 0.236461] Trying to unpack rootfs image as initramfs...
[ 0.712231] Freeing initrd memory: 46696K
[ 0.712254] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.712256] software IO TLB: mapped [mem 0x00000000c437d000-0x00000000c837d000] (64MB)
[ 0.712559] Initialise system trusted keyrings
[ 0.712567] Key type blacklist registered
[ 0.712606] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.713374] zbud: loaded
[ 0.713491] integrity: Platform Keyring initialized
[ 0.713492] Key type asymmetric registered
[ 0.713493] Asymmetric key parser 'x509' registered
[ 0.713499] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.713531] io scheduler mq-deadline registered
[ 0.713991] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.713999] efifb: probing for efifb
[ 0.714012] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.714013] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.714014] efifb: scrolling: redraw
[ 0.714015] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.714071] Console: switching to colour frame buffer device 128x48
[ 0.715209] fb0: EFI VGA frame buffer device
[ 0.715215] intel_idle: MWAIT substates: 0x42120
[ 0.715216] intel_idle: v0.5.1 model 0x3C
[ 0.715342] intel_idle: Local APIC timer is reliable in all C-states
[ 0.715670] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.715671] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.715806] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.715807] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.715916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.716015] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.716466] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 0.716640] 0000:00:16.3: ttyS1 at I/O 0xf0c0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.716804] Linux agpgart interface v0.103
[ 0.716825] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.716981] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.716982] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.717096] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.717166] mousedev: PS/2 mouse device common for all mice
[ 0.717190] rtc_cmos 00:02: RTC can wake from S4
[ 0.717346] rtc_cmos 00:02: registered as rtc0
[ 0.717383] rtc_cmos 00:02: setting system clock to 2022-05-22T23:47:29 UTC (1653263249)
[ 0.717392] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.717399] intel_pstate: Intel P-state driver initializing
[ 0.717580] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.717990] NET: Registered protocol family 10
[ 0.723025] Segment Routing with IPv6
[ 0.723044] mip6: Mobile IPv6
[ 0.723046] NET: Registered protocol family 17
[ 0.723077] mpls_gso: MPLS GSO support
[ 0.723240] microcode: sig=0x306c3, pf=0x2, revision=0x28
[ 0.723264] microcode: Microcode Update Driver: v2.2.
[ 0.723268] IPI shorthand broadcast: enabled
[ 0.723273] sched_clock: Marking stable (722992259, 211351)->(733009106, -9805496)
[ 0.723335] registered taskstats version 1
[ 0.723337] Loading compiled-in X.509 certificates
[ 0.739278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.748437] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.748451] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 0.748469] zswap: loaded using pool lzo/zbud
[ 0.748585] Key type ._fscrypt registered
[ 0.748586] Key type .fscrypt registered
[ 0.748587] Key type fscrypt-provisioning registered
[ 0.748614] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.748765] integrity: Loading X.509 certificate: UEFI:db
[ 0.748781] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.748781] integrity: Loading X.509 certificate: UEFI:db
[ 0.748797] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.750104] Freeing unused kernel image (initmem) memory: 2416K
[ 0.772909] Write protecting the kernel read-only data: 22528k
[ 0.773239] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.773336] Freeing unused kernel image (rodata/data gap) memory: 620K
[ 0.814778] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.814780] x86/mm: Checking user space page tables
[ 0.854011] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.854015] Run /init as init process
[ 0.854016] with arguments:
[ 0.854016] /init
[ 0.854017] with environment:
[ 0.854017] HOME=/
[ 0.854018] TERM=linux
[ 0.854018] BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-amd64
[ 0.903078] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.918014] ACPI: Power Button [PWRB]
[ 0.918070] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.918110] ACPI: Power Button [PWRF]
[ 0.922546] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204)
[ 0.922552] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.922555] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 0.922559] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.922560] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 0.922564] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 0.922567] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.922568] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 0.922571] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 0.922574] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.922575] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.934058] SCSI subsystem initialized
[ 0.938634] ACPI: bus type USB registered
[ 0.938659] usbcore: registered new interface driver usbfs
[ 0.938667] usbcore: registered new interface driver hub
[ 0.938678] usbcore: registered new device driver usb
[ 0.948740] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 0.948868] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 0.948889] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.949334] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 0.949789] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 0.950382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.951167] ehci-pci: EHCI PCI platform driver
[ 0.951289] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.951295] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.951305] ehci-pci 0000:00:1a.0: debug port 2
[ 0.951849] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 0.955201] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.955224] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1c000
[ 0.955525] libata version 3.00 loaded.
[ 0.966640] ahci 0000:00:1f.2: version 3.0
[ 0.966800] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x22 impl SATA mode
[ 0.966802] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.968874] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.968931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 0.968934] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.968935] usb usb1: Product: EHCI Host Controller
[ 0.968937] usb usb1: Manufacturer: Linux 5.10.0-14-amd64 ehci_hcd
[ 0.968938] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.969391] hub 1-0:1.0: USB hub found
[ 0.969404] hub 1-0:1.0: 2 ports detected
[ 0.969816] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.969822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.970882] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.970886] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.971069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 0.971071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.971073] usb usb2: Product: xHCI Host Controller
[ 0.971074] usb usb2: Manufacturer: Linux 5.10.0-14-amd64 xhci-hcd
[ 0.971075] usb usb2: SerialNumber: 0000:00:14.0
[ 0.971186] hub 2-0:1.0: USB hub found
[ 0.971203] hub 2-0:1.0: 12 ports detected
[ 0.973390] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.973395] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.973399] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.973417] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.973453] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 0.973454] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.973455] usb usb3: Product: xHCI Host Controller
[ 0.973456] usb usb3: Manufacturer: Linux 5.10.0-14-amd64 xhci-hcd
[ 0.973457] usb usb3: SerialNumber: 0000:00:14.0
[ 0.973570] hub 3-0:1.0: USB hub found
[ 0.973584] hub 3-0:1.0: 6 ports detected
[ 0.974246] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.974257] ehci-pci 0000:00:1d.0: debug port 2
[ 0.978150] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.978833] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
[ 0.979113] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.993061] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.993150] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 0.993152] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.993154] usb usb4: Product: EHCI Host Controller
[ 0.993156] usb usb4: Manufacturer: Linux 5.10.0-14-amd64 ehci_hcd
[ 0.993157] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.993407] hub 4-0:1.0: USB hub found
[ 0.993417] hub 4-0:1.0: 2 ports detected
[ 0.996543] scsi host0: ahci
[ 0.996762] scsi host1: ahci
[ 0.997122] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 74:d4:35:8d:fe:0a, XID 2c9, IRQ 29
[ 0.997125] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 0.997360] scsi host2: ahci
[ 0.997934] scsi host3: ahci
[ 0.998054] scsi host4: ahci
[ 0.998335] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 0.998473] scsi host5: ahci
[ 0.998526] ata1: DUMMY
[ 0.998528] ata2: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a180 irq 27
[ 0.998529] ata3: DUMMY
[ 0.998530] ata4: DUMMY
[ 0.998531] ata5: DUMMY
[ 0.998533] ata6: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a380 irq 27
[ 1.064983] checking generic (e0000000 300000) vs hw (f7800000 400000)
[ 1.064984] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 1.064985] fb0: switching to inteldrmfb from EFI VGA
[ 1.065044] Console: switching to colour dummy device 80x25
[ 1.065075] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.066048] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.075268] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 1.076295] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.076466] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.103854] fbcon: i915drmfb (fb0) is primary device
[ 1.176234] Console: switching to colour frame buffer device 180x56
[ 1.195238] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 1.224899] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.228898] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[ 1.248898] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.311928] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.311949] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.313221] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.313225] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.313228] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.313643] ata6.00: ATAPI: HL-DT-ST BDDVDRW CH12NS30, 1.00, max UDMA/100
[ 1.314846] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.314851] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.314854] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.315278] ata6.00: configured for UDMA/100
[ 1.324266] ata2.00: ATA-8: KINGSTON SV300S37A120G, 541ABBF0, max UDMA/133
[ 1.324270] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.335033] ata2.00: configured for UDMA/133
[ 1.335342] scsi 1:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 1.336221] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH12NS30 1.00 PQ: 0 ANSI: 5
[ 1.374102] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.374112] sd 1:0:0:0: [sda] Write Protect is off
[ 1.374114] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.374126] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.379160] usb 2-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
[ 1.379162] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.379163] usb 2-4: Product: USB2.1 Hub
[ 1.379163] usb 2-4: Manufacturer: GenesysLogic
[ 1.379713] hub 2-4:1.0: USB hub found
[ 1.379977] hub 2-4:1.0: 4 ports detected
[ 1.381245] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 1.381247] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.381404] hub 1-1:1.0: USB hub found
[ 1.381491] hub 1-1:1.0: 6 ports detected
[ 1.390108] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.409008] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.409622] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 1.409624] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.409782] hub 4-1:1.0: USB hub found
[ 1.409866] hub 4-1:1.0: 6 ports detected
[ 1.410057] sr 5:0:0:0: [sr0] scsi3-mmc drive: 62x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.410059] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.484952] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.508902] usb 2-10: new full-speed USB device number 3 using xhci_hcd
[ 1.660862] usb 2-10: New USB device found, idVendor=050d, idProduct=0012, bcdDevice= 0.00
[ 1.660879] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.660880] usb 2-10: Product: BCM92045DG Non-UHE
[ 1.660881] usb 2-10: Manufacturer: Broadcom Corp
[ 1.736913] tsc: Refined TSC clocksource calibration: 3491.913 MHz
[ 1.736924] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255790e5ea, max_idle_ns: 440795224414 ns
[ 1.736965] clocksource: Switched to clocksource tsc
[ 1.760929] usb 2-4.1: new high-speed USB device number 4 using xhci_hcd
[ 1.885924] usb 2-4.1: New USB device found, idVendor=12d1, idProduct=107f, bcdDevice= 4.09
[ 1.885929] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.885931] usb 2-4.1: Product: AMN-LX9
[ 1.885933] usb 2-4.1: Manufacturer: HUAWEI
[ 1.885935] usb 2-4.1: SerialNumber: WNPNU19703214661
[ 2.012929] usb 2-11: new low-speed USB device number 5 using xhci_hcd
[ 2.164391] usb 2-11: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 2.164403] usb 2-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.164404] usb 2-11: Product: USB Optical Mouse
[ 2.164405] usb 2-11: Manufacturer: Logitech
[ 2.181319] hid: raw HID events driver (C) Jiri Kosina
[ 2.189304] usbcore: registered new interface driver usbhid
[ 2.189311] usbhid: USB HID core driver
[ 2.193072] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-11/2-11:1.0/0003:046D:C077.0001/input/input4
[ 2.193240] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-11/input0
[ 2.264930] usb 2-4.3: new high-speed USB device number 6 using xhci_hcd
[ 2.391538] usb 2-4.3: New USB device found, idVendor=05e3, idProduct=0743, bcdDevice= 8.19
[ 2.391543] usb 2-4.3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 2.391546] usb 2-4.3: Product: USB Storage
[ 2.391548] usb 2-4.3: Manufacturer: Generic
[ 2.391550] usb 2-4.3: SerialNumber: 000000000819
[ 2.496930] usb 2-4.4: new high-speed USB device number 7 using xhci_hcd
[ 2.630396] usb 2-4.4: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 2.630401] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.630404] usb 2-4.4: Product: Flash Drive
[ 2.630406] usb 2-4.4: Manufacturer: Samsung
[ 2.630408] usb 2-4.4: SerialNumber: 0373316010004234
[ 2.652409] usb-storage 2-4.1:1.1: USB Mass Storage device detected
[ 2.652620] scsi host6: usb-storage 2-4.1:1.1
[ 2.652846] usb-storage 2-4.3:1.0: USB Mass Storage device detected
[ 2.653063] scsi host7: usb-storage 2-4.3:1.0
[ 2.653129] usb-storage 2-4.4:1.0: USB Mass Storage device detected
[ 2.653306] usb-storage 2-4.4:1.0: Quirks match for vid 090c pid 1000: 400
[ 2.653683] scsi host8: usb-storage 2-4.4:1.0
[ 2.653743] usbcore: registered new interface driver usb-storage
[ 2.654969] usbcore: registered new interface driver uas
[ 3.657284] scsi 6:0:0:0: CD-ROM Linux File-CD Gadget 0409 PQ: 0 ANSI: 2
[ 3.657496] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
[ 3.657924] sr 6:0:0:0: Power-on or device reset occurred
[ 3.658249] sr 6:0:0:0: [sr1] scsi-1 drive
[ 3.728914] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 3.976808] scsi 8:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 3.977638] sd 8:0:0:0: [sdc] 62652416 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 3.978169] sd 8:0:0:0: [sdc] Write Protect is off
[ 3.978172] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 3.978712] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.999584] sd 7:0:0:0: [sdb] 249737216 512-byte logical blocks: (128 GB/119 GiB)
[ 3.999942] sd 7:0:0:0: [sdb] Write Protect is off
[ 3.999943] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4.000302] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.002571] sdc: sdc1 sdc2
[ 4.018782] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 4.023193] Alternate GPT is invalid, using primary GPT.
[ 4.023198] sdb: sdb1 sdb2 sdb3 sdb4
[ 4.046087] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 6.989481] usb 2-4.1: USB disconnect, device number 4
[ 7.304897] usb 2-4.1: new high-speed USB device number 8 using xhci_hcd
[ 7.429491] usb 2-4.1: New USB device found, idVendor=12d1, idProduct=107f, bcdDevice= 4.09
[ 7.429492] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.429493] usb 2-4.1: Product: AMN-LX9
[ 7.429494] usb 2-4.1: Manufacturer: HUAWEI
[ 7.429494] usb 2-4.1: SerialNumber: WNPNU19703214661
[ 7.563171] PM: Image not found (code -22)
[ 7.624328] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.665335] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 7.749858] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 7.764744] systemd[1]: Inserted module 'autofs4'
[ 7.792165] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 7.808942] systemd[1]: Detected architecture x86-64.
[ 7.809575] systemd[1]: Set hostname to <debianal1>.
[ 7.842868] systemd-fstab-generator[259]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
[ 7.879059] systemd[254]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[ 7.940601] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 7.968032] systemd[1]: Queued start job for default target Graphical Interface.
[ 7.968914] systemd[1]: Created slice system-getty.slice.
[ 7.969105] systemd[1]: Created slice system-modprobe.slice.
[ 7.969300] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.969453] systemd[1]: Created slice system-tor.slice.
[ 7.969579] systemd[1]: Created slice User and Session Slice.
[ 7.969631] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.969753] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.969795] systemd[1]: Reached target User and Group Name Lookups.
[ 7.969806] systemd[1]: Reached target Remote File Systems.
[ 7.969814] systemd[1]: Reached target Slices.
[ 7.969912] systemd[1]: Listening on Syslog Socket.
[ 7.969978] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.970021] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.970138] systemd[1]: Listening on Journal Audit Socket.
[ 7.970206] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.970291] systemd[1]: Listening on Journal Socket.
[ 7.970654] systemd[1]: Listening on udev Control Socket.
[ 7.970722] systemd[1]: Listening on udev Kernel Socket.
[ 7.971246] systemd[1]: Mounting Huge Pages File System...
[ 7.971785] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.972526] systemd[1]: Mounting Kernel Debug File System...
[ 7.973423] systemd[1]: Mounting Kernel Trace File System...
[ 7.974215] systemd[1]: Starting Set the console keyboard layout...
[ 7.974997] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 7.975997] systemd[1]: Starting Load Kernel Module configfs...
[ 7.976946] systemd[1]: Starting Load Kernel Module drm...
[ 7.977725] systemd[1]: Starting Load Kernel Module fuse...
[ 7.978771] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 7.978818] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 7.980373] systemd[1]: Starting Journal Service...
[ 7.982791] systemd[1]: Starting Load Kernel Modules...
[ 7.983556] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.984349] systemd[1]: Starting Coldplug All udev Devices...
[ 7.985990] systemd[1]: Mounted Huge Pages File System.
[ 7.986283] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.986424] systemd[1]: Mounted Kernel Debug File System.
[ 7.986566] systemd[1]: Mounted Kernel Trace File System.
[ 7.986905] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 7.987228] systemd[1]: modprobe@configfs.service: Succeeded.
[ 7.987425] systemd[1]: Finished Load Kernel Module configfs.
[ 7.987651] systemd[1]: modprobe@drm.service: Succeeded.
[ 7.987836] systemd[1]: Finished Load Kernel Module drm.
[ 7.988727] systemd[1]: Mounting Kernel Configuration File System...
[ 7.990192] fuse: init (API version 7.32)
[ 7.991406] systemd[1]: modprobe@fuse.service: Succeeded.
[ 7.991626] systemd[1]: Finished Load Kernel Module fuse.
[ 7.992628] systemd[1]: Mounting FUSE Control File System...
[ 7.993036] systemd[1]: Mounted Kernel Configuration File System.
[ 7.994120] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 7.994159] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 7.995915] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 7.997866] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 7.997929] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 7.998864] systemd[1]: Starting Load/Save Random Seed...
[ 7.999726] systemd[1]: Starting Create System Users...
[ 8.000852] systemd[1]: Mounted FUSE Control File System.
[ 8.020693] systemd[1]: Finished Load/Save Random Seed.
[ 8.021040] systemd[1]: Finished Create System Users.
[ 8.021191] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 8.021936] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.026527] lp: driver loaded but no devices found
[ 8.029818] ppdev: user-space parallel port driver
[ 8.032255] parport_pc 00:07: reported by Plug and Play ACPI
[ 8.032324] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 8.049780] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 8.051525] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 8.060940] systemd[1]: Finished Set the console keyboard layout.
[ 8.061092] systemd[1]: Reached target Local File Systems (Pre).
[ 8.062568] systemd[1]: Mounting Mount unit for bare, revision 5...
[ 8.063855] systemd[1]: Mounting Mount unit for core18, revision 2344...
[ 8.065208] systemd[1]: Mounting Mount unit for core18, revision 2409...
[ 8.066530] systemd[1]: Mounting Mount unit for core20, revision 1405...
[ 8.067847] systemd[1]: Mounting Mount unit for core20, revision 1434...
[ 8.069988] systemd[1]: Mounting Mount unit for dosbox-staging, revision 75...
[ 8.071184] systemd[1]: Mounting Mount unit for dosbox-staging, revision 81...
[ 8.072953] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 161...
[ 8.074187] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 87...
[ 8.075335] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 99...
[ 8.076537] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1519...
[ 8.077963] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1534...
[ 8.079314] systemd[1]: Mounting Mount unit for snapd, revision 15177...
[ 8.080654] systemd[1]: Mounting Mount unit for snapd, revision 15534...
[ 8.082563] systemd[1]: Started Journal Service.
[ 8.101291] systemd-journald[284]: Received client request to flush runtime journal.
[ 8.137018] lp0: using parport0 (interrupt-driven).
[ 8.362724] at24 0-0050: supply vcc not found, using dummy regulator
[ 8.363833] at24 0-0050: 256 byte spd EEPROM, read-only
[ 8.363863] at24 0-0052: supply vcc not found, using dummy regulator
[ 8.364763] iTCO_vendor_support: vendor-support=0
[ 8.369414] at24 0-0052: 256 byte spd EEPROM, read-only
[ 8.369976] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.370017] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 8.370673] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 8.370711] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 8.370746] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 8.370785] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 8.397230] usbcore: registered new interface driver cdc_ether
[ 8.422277] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.429538] pstore: Using crash dump compression: deflate
[ 8.429551] pstore: Registered efi as persistent store backend
[ 8.433402] rndis_host 2-4.1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-4.1, RNDIS device, e6:e6:a5:00:c2:c4
[ 8.433431] usbcore: registered new interface driver rndis_host
[ 8.476912] Adding 963580k swap on /dev/sda7. Priority:-2 extents:1 across:963580k SSFS
[ 8.524912] loop: module loaded
[ 8.525017] cryptd: max_cpu_qlen set to 1000
[ 8.547436] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 8.547438] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 8.547439] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 8.547440] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 8.547441] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 8.591946] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.596776] AVX2 version of gcm_enc/dec engaged.
[ 8.596779] AES CTR mode by8 optimization enabled
[ 8.659876] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 8.660070] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.660152] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 8.673303] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 8.673349] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 8.673426] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 8.673466] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 8.673505] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 8.757040] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 8.818322] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 8.818325] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.818327] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.818328] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
[ 8.818329] snd_hda_codec_realtek hdaudioC1D2: inputs:
[ 8.818331] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
[ 8.818333] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
[ 8.818334] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
[ 8.818335] snd_hda_codec_realtek hdaudioC1D2: CD=0x1c
[ 8.844469] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 8.844523] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 8.844574] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 8.844616] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 8.844662] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 8.844724] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0
[ 8.890231] Bluetooth: Core ver 2.22
[ 8.890254] NET: Registered protocol family 31
[ 8.890255] Bluetooth: HCI device and connection manager initialized
[ 8.890258] Bluetooth: HCI socket layer initialized
[ 8.890261] Bluetooth: L2CAP socket layer initialized
[ 8.890264] Bluetooth: SCO socket layer initialized
[ 8.901170] usbcore: registered new interface driver btusb
[ 8.930171] intel_rapl_common: Found RAPL domain package
[ 8.930174] intel_rapl_common: Found RAPL domain core
[ 8.930175] intel_rapl_common: Found RAPL domain uncore
[ 8.930176] intel_rapl_common: Found RAPL domain dram
[ 9.268279] audit: type=1400 audit(1653256058.044:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=602 comm="apparmor_parser"
[ 9.271661] audit: type=1400 audit(1653256058.048:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=604 comm="apparmor_parser"
[ 9.271666] audit: type=1400 audit(1653256058.048:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=604 comm="apparmor_parser"
[ 9.278152] audit: type=1400 audit(1653256058.056:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=601 comm="apparmor_parser"
[ 9.278158] audit: type=1400 audit(1653256058.056:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=601 comm="apparmor_parser"
[ 9.278160] audit: type=1400 audit(1653256058.056:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=601 comm="apparmor_parser"
[ 9.278502] audit: type=1400 audit(1653256058.056:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=608 comm="apparmor_parser"
[ 9.281706] audit: type=1400 audit(1653256058.060:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=610 comm="apparmor_parser"
[ 9.281836] audit: type=1400 audit(1653256058.060:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=607 comm="apparmor_parser"
[ 9.281839] audit: type=1400 audit(1653256058.060:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=607 comm="apparmor_parser"
[ 9.674947] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.674949] Bluetooth: BNEP filters: protocol multicast
[ 9.674953] Bluetooth: BNEP socket layer initialized
[ 9.707918] NET: Registered protocol family 38
[ 9.859414] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[ 9.860121] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE)
[ 10.159194] r8169 0000:02:00.0 enp2s0: Link is Down
[ 12.714329] Bluetooth: RFCOMM TTY layer initialized
[ 12.714336] Bluetooth: RFCOMM socket layer initialized
[ 12.714341] Bluetooth: RFCOMM ver 1.11
[ 15.323353] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 15.325858] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 15.485487] rfkill: input handler disabled
[ 39.815391] kauditd_printk_skb: 24 callbacks suppressed
[ 39.815392] audit: type=1400 audit(1653263289.437:36): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=8417 comm="cups-browsed" capability=23 capname="sys_nice"
[ 5026.382801] usb 2-4: USB disconnect, device number 2
[ 5026.382803] usb 2-4.1: USB disconnect, device number 8
[ 5026.382890] rndis_host 2-4.1:1.0 usb0: unregister 'rndis_host' usb-0000:00:14.0-4.1, RNDIS device
[ 5026.405735] usb 2-4.3: USB disconnect, device number 6
[ 5026.413622] scsi 7:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[ 5026.413627] scsi 7:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 09 68 00 00 00 80 00
[ 5026.413629] blk_update_request: I/O error, dev sdb, sector 616448 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 5026.413675] Buffer I/O error on dev sdb, logical block 77056, async page read
[ 5026.413705] Buffer I/O error on dev sdb, logical block 77056, async page read
[ 5026.413711] Buffer I/O error on dev sdb, logical block 77056, async page read
[ 5026.413715] Buffer I/O error on dev sdb, logical block 77056, async page read
[ 5026.413723] Buffer I/O error on dev sdb, logical block 77057, async page read
[ 5026.413727] Buffer I/O error on dev sdb, logical block 77057, async page read
[ 5026.413732] Buffer I/O error on dev sdb, logical block 77057, async page read
[ 5026.413737] Buffer I/O error on dev sdb, logical block 77057, async page read
[ 5026.413743] Buffer I/O error on dev sdb, logical block 77058, async page read
[ 5026.413748] Buffer I/O error on dev sdb, logical block 77058, async page read
[ 5026.438934] usb 2-4.4: USB disconnect, device number 7
[ 5026.456293] sd 8:0:0:0: [sdc] Synchronizing SCSI cache
[ 5026.456318] sd 8:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 5026.752612] usb 2-4: new high-speed USB device number 9 using xhci_hcd
[ 5026.910893] usb 2-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
[ 5026.910897] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5026.910898] usb 2-4: Product: USB2.1 Hub
[ 5026.910900] usb 2-4: Manufacturer: GenesysLogic
[ 5026.911578] hub 2-4:1.0: USB hub found
[ 5026.911846] hub 2-4:1.0: 4 ports detected
[ 5027.224599] usb 2-4.1: new high-speed USB device number 10 using xhci_hcd
[ 5027.353132] usb 2-4.1: New USB device found, idVendor=12d1, idProduct=107f, bcdDevice= 4.09
[ 5027.353134] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5027.353136] usb 2-4.1: Product: AMN-LX9
[ 5027.353137] usb 2-4.1: Manufacturer: HUAWEI
[ 5027.353138] usb 2-4.1: SerialNumber: WNPNU19703214661
[ 5027.356727] rndis_host 2-4.1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-4.1, RNDIS device, 6e:f3:d5:84:ee:9b
[ 5027.468599] usb 2-4.3: new high-speed USB device number 11 using xhci_hcd
[ 5027.601257] usb 2-4.3: New USB device found, idVendor=05e3, idProduct=0743, bcdDevice= 8.19
[ 5027.601261] usb 2-4.3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 5027.601263] usb 2-4.3: Product: USB Storage
[ 5027.601264] usb 2-4.3: Manufacturer: Generic
[ 5027.601266] usb 2-4.3: SerialNumber: 000000000819
[ 5027.602341] usb-storage 2-4.3:1.0: USB Mass Storage device detected
[ 5027.602464] scsi host6: usb-storage 2-4.3:1.0
[ 5027.712592] usb 2-4.4: new high-speed USB device number 12 using xhci_hcd
[ 5027.841971] usb 2-4.4: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 5027.841974] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5027.841976] usb 2-4.4: Product: Flash Drive
[ 5027.841977] usb 2-4.4: Manufacturer: Samsung
[ 5027.841979] usb 2-4.4: SerialNumber: 0373316010004234
[ 5027.843924] usb-storage 2-4.4:1.0: USB Mass Storage device detected
[ 5027.844030] usb-storage 2-4.4:1.0: Quirks match for vid 090c pid 1000: 400
[ 5027.846819] scsi host8: usb-storage 2-4.4:1.0
[ 5028.625210] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
[ 5028.625663] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5028.969155] sd 6:0:0:0: [sdc] 249737216 512-byte logical blocks: (128 GB/119 GiB)
[ 5028.969504] sd 6:0:0:0: [sdc] Write Protect is off
[ 5028.969506] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 5028.969841] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5028.991219] Alternate GPT is invalid, using primary GPT.
[ 5028.991231] sdc: sdc1 sdc2 sdc3 sdc4
[ 5029.016496] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5029.168388] scsi 8:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 5029.169282] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 5029.172593] sd 8:0:0:0: [sdd] 62652416 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 5029.187156] sd 8:0:0:0: [sdd] Write Protect is off
[ 5029.187160] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 5029.187700] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5029.233672] sdd: sdd1 sdd2
[ 5029.251428] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 5029.401065] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 5029.414208] FAT-fs (sdc4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5029.793795] FAT-fs (sdd2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5031.416585] buffer_io_error: 1015730 callbacks suppressed
[ 5031.416587] Buffer I/O error on dev sdb, logical block 330991, async page read
[ 5031.416598] Buffer I/O error on dev sdb, logical block 330991, async page read
[ 5031.416604] Buffer I/O error on dev sdb, logical block 330991, async page read
[ 5031.416611] Buffer I/O error on dev sdb, logical block 330991, async page read
[ 5031.416619] Buffer I/O error on dev sdb, logical block 330992, async page read
[ 5031.416625] Buffer I/O error on dev sdb, logical block 330992, async page read
[ 5031.416630] Buffer I/O error on dev sdb, logical block 330992, async page read
[ 5031.416636] Buffer I/O error on dev sdb, logical block 330992, async page read
[ 5031.416644] Buffer I/O error on dev sdb, logical block 330993, async page read
[ 5031.416650] Buffer I/O error on dev sdb, logical block 330993, async page read
[ 5036.420535] buffer_io_error: 1085096 callbacks suppressed
[ 5036.420537] Buffer I/O error on dev sdb, logical block 602267, async page read
[ 5036.420547] Buffer I/O error on dev sdb, logical block 602267, async page read
[ 5036.420558] Buffer I/O error on dev sdb, logical block 602268, async page read
[ 5036.420566] Buffer I/O error on dev sdb, logical block 602268, async page read
[ 5036.420572] Buffer I/O error on dev sdb, logical block 602268, async page read
[ 5036.420579] Buffer I/O error on dev sdb, logical block 602268, async page read
[ 5036.420588] Buffer I/O error on dev sdb, logical block 602269, async page read
[ 5036.420595] Buffer I/O error on dev sdb, logical block 602269, async page read
[ 5036.420602] Buffer I/O error on dev sdb, logical block 602269, async page read
[ 5036.420609] Buffer I/O error on dev sdb, logical block 602269, async page read
[ 5041.425115] buffer_io_error: 1084866 callbacks suppressed
[ 5041.425117] Buffer I/O error on dev sdb, logical block 873486, async page read
[ 5041.425136] Buffer I/O error on dev sdb, logical block 873486, async page read
[ 5041.425154] Buffer I/O error on dev sdb, logical block 873487, async page read
[ 5041.425160] Buffer I/O error on dev sdb, logical block 873487, async page read
[ 5041.425166] Buffer I/O error on dev sdb, logical block 873487, async page read
[ 5041.425173] Buffer I/O error on dev sdb, logical block 873487, async page read
[ 5041.425183] Buffer I/O error on dev sdb, logical block 873488, async page read
[ 5041.425190] Buffer I/O error on dev sdb, logical block 873488, async page read
[ 5041.425196] Buffer I/O error on dev sdb, logical block 873488, async page read
[ 5041.425203] Buffer I/O error on dev sdb, logical block 873488, async page read
[ 5046.428455] buffer_io_error: 1083556 callbacks suppressed
[ 5046.428457] Buffer I/O error on dev sdb, logical block 1144378, async page read
[ 5046.428467] Buffer I/O error on dev sdb, logical block 1144378, async page read
[ 5046.428473] Buffer I/O error on dev sdb, logical block 1144378, async page read
[ 5046.428478] Buffer I/O error on dev sdb, logical block 1144378, async page read
[ 5046.428486] Buffer I/O error on dev sdb, logical block 1144379, async page read
[ 5046.428491] Buffer I/O error on dev sdb, logical block 1144379, async page read
[ 5046.428497] Buffer I/O error on dev sdb, logical block 1144379, async page read
[ 5046.428503] Buffer I/O error on dev sdb, logical block 1144379, async page read
[ 5046.428510] Buffer I/O error on dev sdb, logical block 1144380, async page read
[ 5046.428516] Buffer I/O error on dev sdb, logical block 1144380, async page read
[ 5051.432422] buffer_io_error: 1065775 callbacks suppressed
[ 5051.432425] Buffer I/O error on dev sdb, logical block 1410824, async page read
[ 5051.432437] Buffer I/O error on dev sdb, logical block 1410824, async page read
[ 5051.432445] Buffer I/O error on dev sdb, logical block 1410824, async page read
[ 5051.432455] Buffer I/O error on dev sdb, logical block 1410825, async page read
[ 5051.432461] Buffer I/O error on dev sdb, logical block 1410825, async page read
[ 5051.432466] Buffer I/O error on dev sdb, logical block 1410825, async page read
[ 5051.432472] Buffer I/O error on dev sdb, logical block 1410825, async page read
[ 5051.432480] Buffer I/O error on dev sdb, logical block 1410826, async page read
[ 5051.432486] Buffer I/O error on dev sdb, logical block 1410826, async page read
[ 5051.432492] Buffer I/O error on dev sdb, logical block 1410826, async page read
[ 5056.436383] buffer_io_error: 1093625 callbacks suppressed
[ 5056.436385] Buffer I/O error on dev sdb, logical block 1684233, async page read
[ 5056.436395] Buffer I/O error on dev sdb, logical block 1684233, async page read
[ 5056.436401] Buffer I/O error on dev sdb, logical block 1684233, async page read
[ 5056.436408] Buffer I/O error on dev sdb, logical block 1684233, async page read
[ 5056.436420] Buffer I/O error on dev sdb, logical block 1684234, async page read
[ 5056.436427] Buffer I/O error on dev sdb, logical block 1684234, async page read
[ 5056.436433] Buffer I/O error on dev sdb, logical block 1684234, async page read
[ 5056.436440] Buffer I/O error on dev sdb, logical block 1684234, async page read
[ 5056.436450] Buffer I/O error on dev sdb, logical block 1684235, async page read
[ 5056.436457] Buffer I/O error on dev sdb, logical block 1684235, async page read
[ 5061.440352] buffer_io_error: 1075167 callbacks suppressed
[ 5061.440354] Buffer I/O error on dev sdb, logical block 1953027, async page read
[ 5061.440360] Buffer I/O error on dev sdb, logical block 1953027, async page read
[ 5061.440365] Buffer I/O error on dev sdb, logical block 1953027, async page read
[ 5061.440370] Buffer I/O error on dev sdb, logical block 1953028, async page read
[ 5061.440373] Buffer I/O error on dev sdb, logical block 1953028, async page read
[ 5061.440378] Buffer I/O error on dev sdb, logical block 1953028, async page read
[ 5061.440385] Buffer I/O error on dev sdb, logical block 1953028, async page read
[ 5061.440393] Buffer I/O error on dev sdb, logical block 1953029, async page read
[ 5061.440398] Buffer I/O error on dev sdb, logical block 1953029, async page read
[ 5061.440404] Buffer I/O error on dev sdb, logical block 1953029, async page read
[ 5066.444312] buffer_io_error: 1074577 callbacks suppressed
[ 5066.444315] Buffer I/O error on dev sdb, logical block 2221674, async page read
[ 5066.444325] Buffer I/O error on dev sdb, logical block 2221674, async page read
[ 5066.444329] Buffer I/O error on dev sdb, logical block 2221674, async page read
[ 5066.444334] Buffer I/O error on dev sdb, logical block 2221674, async page read
[ 5066.444342] Buffer I/O error on dev sdb, logical block 2221675, async page read
[ 5066.444348] Buffer I/O error on dev sdb, logical block 2221675, async page read
[ 5066.444353] Buffer I/O error on dev sdb, logical block 2221675, async page read
[ 5066.444359] Buffer I/O error on dev sdb, logical block 2221675, async page read
[ 5066.444366] Buffer I/O error on dev sdb, logical block 2221676, async page read
[ 5066.444371] Buffer I/O error on dev sdb, logical block 2221676, async page read
[ 5071.448285] buffer_io_error: 1080458 callbacks suppressed
[ 5071.448287] Buffer I/O error on dev sdb, logical block 2491791, async page read
[ 5071.448294] Buffer I/O error on dev sdb, logical block 2491791, async page read
[ 5071.448298] Buffer I/O error on dev sdb, logical block 2491791, async page read
[ 5071.448302] Buffer I/O error on dev sdb, logical block 2491791, async page read
[ 5071.448310] Buffer I/O error on dev sdb, logical block 2491792, async page read
[ 5071.448317] Buffer I/O error on dev sdb, logical block 2491792, async page read
[ 5071.448322] Buffer I/O error on dev sdb, logical block 2491792, async page read
[ 5071.448327] Buffer I/O error on dev sdb, logical block 2491792, async page read
[ 5071.448333] Buffer I/O error on dev sdb, logical block 2491793, async page read
[ 5071.448337] Buffer I/O error on dev sdb, logical block 2491793, async page read
[ 5076.452247] buffer_io_error: 1053478 callbacks suppressed
[ 5076.452249] Buffer I/O error on dev sdb, logical block 2755163, async page read
[ 5076.452259] Buffer I/O error on dev sdb, logical block 2755163, async page read
[ 5076.452265] Buffer I/O error on dev sdb, logical block 2755163, async page read
[ 5076.452271] Buffer I/O error on dev sdb, logical block 2755163, async page read
[ 5076.452280] Buffer I/O error on dev sdb, logical block 2755164, async page read
[ 5076.452287] Buffer I/O error on dev sdb, logical block 2755164, async page read
[ 5076.452293] Buffer I/O error on dev sdb, logical block 2755164, async page read
[ 5076.452299] Buffer I/O error on dev sdb, logical block 2755164, async page read
[ 5076.452309] Buffer I/O error on dev sdb, logical block 2755165, async page read
[ 5076.452316] Buffer I/O error on dev sdb, logical block 2755165, async page read
[ 5081.456209] buffer_io_error: 1061650 callbacks suppressed
[ 5081.456211] Buffer I/O error on dev sdb, logical block 3020578, async page read
[ 5081.456221] Buffer I/O error on dev sdb, logical block 3020578, async page read
[ 5081.456228] Buffer I/O error on dev sdb, logical block 3020578, async page read
[ 5081.456234] Buffer I/O error on dev sdb, logical block 3020578, async page read
[ 5081.456243] Buffer I/O error on dev sdb, logical block 3020579, async page read
[ 5081.456250] Buffer I/O error on dev sdb, logical block 3020579, async page read
[ 5081.456256] Buffer I/O error on dev sdb, logical block 3020579, async page read
[ 5081.456263] Buffer I/O error on dev sdb, logical block 3020579, async page read
[ 5081.456273] Buffer I/O error on dev sdb, logical block 3020580, async page read
[ 5081.456280] Buffer I/O error on dev sdb, logical block 3020580, async page read
[ 5086.460168] buffer_io_error: 1057730 callbacks suppressed
[ 5086.460170] Buffer I/O error on dev sdb, logical block 3285013, async page read
[ 5086.460180] Buffer I/O error on dev sdb, logical block 3285013, async page read
[ 5086.460186] Buffer I/O error on dev sdb, logical block 3285013, async page read
[ 5086.460191] Buffer I/O error on dev sdb, logical block 3285013, async page read
[ 5086.460198] Buffer I/O error on dev sdb, logical block 3285014, async page read
[ 5086.460203] Buffer I/O error on dev sdb, logical block 3285014, async page read
[ 5086.460209] Buffer I/O error on dev sdb, logical block 3285014, async page read
[ 5086.460214] Buffer I/O error on dev sdb, logical block 3285014, async page read
[ 5086.460223] Buffer I/O error on dev sdb, logical block 3285015, async page read
[ 5086.460229] Buffer I/O error on dev sdb, logical block 3285015, async page read
[ 5091.464140] buffer_io_error: 1052778 callbacks suppressed
[ 5091.464141] Buffer I/O error on dev sdb, logical block 3548210, async page read
[ 5091.464150] Buffer I/O error on dev sdb, logical block 3548210, async page read
[ 5091.464156] Buffer I/O error on dev sdb, logical block 3548210, async page read
[ 5091.464161] Buffer I/O error on dev sdb, logical block 3548210, async page read
[ 5091.464170] Buffer I/O error on dev sdb, logical block 3548211, async page read
[ 5091.464176] Buffer I/O error on dev sdb, logical block 3548211, async page read
[ 5091.464181] Buffer I/O error on dev sdb, logical block 3548211, async page read
[ 5091.464187] Buffer I/O error on dev sdb, logical block 3548211, async page read
[ 5091.464194] Buffer I/O error on dev sdb, logical block 3548212, async page read
[ 5091.464200] Buffer I/O error on dev sdb, logical block 3548212, async page read
[ 5096.468107] buffer_io_error: 1059241 callbacks suppressed
[ 5096.468109] Buffer I/O error on dev sdb, logical block 3813022, async page read
[ 5096.468119] Buffer I/O error on dev sdb, logical block 3813023, async page read
[ 5096.468124] Buffer I/O error on dev sdb, logical block 3813023, async page read
[ 5096.468128] Buffer I/O error on dev sdb, logical block 3813023, async page read
[ 5096.468134] Buffer I/O error on dev sdb, logical block 3813023, async page read
[ 5096.468141] Buffer I/O error on dev sdb, logical block 3813024, async page read
[ 5096.468146] Buffer I/O error on dev sdb, logical block 3813024, async page read
[ 5096.468151] Buffer I/O error on dev sdb, logical block 3813024, async page read
[ 5096.468157] Buffer I/O error on dev sdb, logical block 3813024, async page read
[ 5096.468167] Buffer I/O error on dev sdb, logical block 3813025, async page read
[ 5101.472059] buffer_io_error: 1053673 callbacks suppressed
[ 5101.472061] Buffer I/O error on dev sdb, logical block 4076443, async page read
[ 5101.472070] Buffer I/O error on dev sdb, logical block 4076443, async page read
[ 5101.472077] Buffer I/O error on dev sdb, logical block 4076444, async page read
[ 5101.472083] Buffer I/O error on dev sdb, logical block 4076444, async page read
[ 5101.472088] Buffer I/O error on dev sdb, logical block 4076444, async page read
[ 5101.472093] Buffer I/O error on dev sdb, logical block 4076444, async page read
[ 5101.472100] Buffer I/O error on dev sdb, logical block 4076445, async page read
[ 5101.472105] Buffer I/O error on dev sdb, logical block 4076445, async page read
[ 5101.472109] Buffer I/O error on dev sdb, logical block 4076445, async page read
[ 5101.472113] Buffer I/O error on dev sdb, logical block 4076445, async page read
[ 5106.476025] buffer_io_error: 1055165 callbacks suppressed
[ 5106.476027] Buffer I/O error on dev sdb, logical block 4340237, async page read
[ 5106.476036] Buffer I/O error on dev sdb, logical block 4340237, async page read
[ 5106.476040] Buffer I/O error on dev sdb, logical block 4340237, async page read
[ 5106.476047] Buffer I/O error on dev sdb, logical block 4340238, async page read
[ 5106.476052] Buffer I/O error on dev sdb, logical block 4340238, async page read
[ 5106.476055] Buffer I/O error on dev sdb, logical block 4340238, async page read
[ 5106.476060] Buffer I/O error on dev sdb, logical block 4340238, async page read
[ 5106.476066] Buffer I/O error on dev sdb, logical block 4340239, async page read
[ 5106.476071] Buffer I/O error on dev sdb, logical block 4340239, async page read
[ 5106.476076] Buffer I/O error on dev sdb, logical block 4340239, async page read
[ 5111.479989] buffer_io_error: 1045316 callbacks suppressed
[ 5111.479991] Buffer I/O error on dev sdb, logical block 4601568, async page read
[ 5111.480002] Buffer I/O error on dev sdb, logical block 4601569, async page read
[ 5111.480008] Buffer I/O error on dev sdb, logical block 4601569, async page read
[ 5111.480014] Buffer I/O error on dev sdb, logical block 4601569, async page read
[ 5111.480020] Buffer I/O error on dev sdb, logical block 4601569, async page read
[ 5111.480028] Buffer I/O error on dev sdb, logical block 4601570, async page read
[ 5111.480033] Buffer I/O error on dev sdb, logical block 4601570, async page read
[ 5111.480039] Buffer I/O error on dev sdb, logical block 4601570, async page read
[ 5111.480045] Buffer I/O error on dev sdb, logical block 4601570, async page read
[ 5111.480053] Buffer I/O error on dev sdb, logical block 4601571, async page read
[ 5116.483956] buffer_io_error: 1041805 callbacks suppressed
[ 5116.483957] Buffer I/O error on dev sdb, logical block 4862022, async page read
[ 5116.483968] Buffer I/O error on dev sdb, logical block 4862022, async page read
[ 5116.483977] Buffer I/O error on dev sdb, logical block 4862023, async page read
[ 5116.483982] Buffer I/O error on dev sdb, logical block 4862023, async page read
[ 5116.483986] Buffer I/O error on dev sdb, logical block 4862023, async page read
[ 5116.483993] Buffer I/O error on dev sdb, logical block 4862023, async page read
[ 5116.484002] Buffer I/O error on dev sdb, logical block 4862024, async page read
[ 5116.484008] Buffer I/O error on dev sdb, logical block 4862024, async page read
[ 5116.484014] Buffer I/O error on dev sdb, logical block 4862024, async page read
[ 5116.484019] Buffer I/O error on dev sdb, logical block 4862024, async page read
[ 5121.487918] buffer_io_error: 1048064 callbacks suppressed
[ 5121.487920] Buffer I/O error on dev sdb, logical block 5124041, async page read
[ 5121.487927] Buffer I/O error on dev sdb, logical block 5124041, async page read
[ 5121.487932] Buffer I/O error on dev sdb, logical block 5124041, async page read
[ 5121.487937] Buffer I/O error on dev sdb, logical block 5124041, async page read
[ 5121.487944] Buffer I/O error on dev sdb, logical block 5124042, async page read
[ 5121.487949] Buffer I/O error on dev sdb, logical block 5124042, async page read
[ 5121.487954] Buffer I/O error on dev sdb, logical block 5124042, async page read
[ 5121.487959] Buffer I/O error on dev sdb, logical block 5124042, async page read
[ 5121.487965] Buffer I/O error on dev sdb, logical block 5124043, async page read
[ 5121.487971] Buffer I/O error on dev sdb, logical block 5124043, async page read
[ 5126.491881] buffer_io_error: 1062246 callbacks suppressed
[ 5126.491883] Buffer I/O error on dev sdb, logical block 5389605, async page read
[ 5126.491892] Buffer I/O error on dev sdb, logical block 5389605, async page read
[ 5126.491898] Buffer I/O error on dev sdb, logical block 5389605, async page read
[ 5126.491904] Buffer I/O error on dev sdb, logical block 5389605, async page read
[ 5126.491914] Buffer I/O error on dev sdb, logical block 5389606, async page read
[ 5126.491921] Buffer I/O error on dev sdb, logical block 5389606, async page read
[ 5126.491927] Buffer I/O error on dev sdb, logical block 5389606, async page read
[ 5126.491935] Buffer I/O error on dev sdb, logical block 5389606, async page read
[ 5126.491944] Buffer I/O error on dev sdb, logical block 5389607, async page read
[ 5126.491951] Buffer I/O error on dev sdb, logical block 5389607, async page read
[ 5131.495844] buffer_io_error: 1048873 callbacks suppressed
[ 5131.495846] Buffer I/O error on dev sdb, logical block 5651825, async page read
[ 5131.495862] Buffer I/O error on dev sdb, logical block 5651826, async page read
[ 5131.495869] Buffer I/O error on dev sdb, logical block 5651826, async page read
[ 5131.495875] Buffer I/O error on dev sdb, logical block 5651826, async page read
[ 5131.495882] Buffer I/O error on dev sdb, logical block 5651826, async page read
[ 5131.495891] Buffer I/O error on dev sdb, logical block 5651827, async page read
[ 5131.495898] Buffer I/O error on dev sdb, logical block 5651827, async page read
[ 5131.495905] Buffer I/O error on dev sdb, logical block 5651827, async page read
[ 5131.495911] Buffer I/O error on dev sdb, logical block 5651827, async page read
[ 5131.495920] Buffer I/O error on dev sdb, logical block 5651828, async page read
[ 5136.499806] buffer_io_error: 1063577 callbacks suppressed
[ 5136.499807] Buffer I/O error on dev sdb, logical block 5917722, async page read
[ 5136.499815] Buffer I/O error on dev sdb, logical block 5917722, async page read
[ 5136.499823] Buffer I/O error on dev sdb, logical block 5917723, async page read
[ 5136.499828] Buffer I/O error on dev sdb, logical block 5917723, async page read
[ 5136.499835] Buffer I/O error on dev sdb, logical block 5917723, async page read
[ 5136.499841] Buffer I/O error on dev sdb, logical block 5917723, async page read
[ 5136.499848] Buffer I/O error on dev sdb, logical block 5917724, async page read
[ 5136.499855] Buffer I/O error on dev sdb, logical block 5917724, async page read
[ 5136.499860] Buffer I/O error on dev sdb, logical block 5917724, async page read
[ 5136.499866] Buffer I/O error on dev sdb, logical block 5917724, async page read
[ 5141.503766] buffer_io_error: 1060676 callbacks suppressed
[ 5141.503768] Buffer I/O error on dev sdb, logical block 6182894, async page read
[ 5141.503776] Buffer I/O error on dev sdb, logical block 6182894, async page read
[ 5141.503780] Buffer I/O error on dev sdb, logical block 6182894, async page read
[ 5141.503784] Buffer I/O error on dev sdb, logical block 6182894, async page read
[ 5141.503790] Buffer I/O error on dev sdb, logical block 6182895, async page read
[ 5141.503794] Buffer I/O error on dev sdb, logical block 6182895, async page read
[ 5141.503799] Buffer I/O error on dev sdb, logical block 6182895, async page read
[ 5141.503804] Buffer I/O error on dev sdb, logical block 6182895, async page read
[ 5141.503813] Buffer I/O error on dev sdb, logical block 6182896, async page read
[ 5141.503817] Buffer I/O error on dev sdb, logical block 6182896, async page read
[ 5146.507730] buffer_io_error: 1046250 callbacks suppressed
[ 5146.507732] Buffer I/O error on dev sdb, logical block 6444459, async page read
[ 5146.507742] Buffer I/O error on dev sdb, logical block 6444459, async page read
[ 5146.507746] Buffer I/O error on dev sdb, logical block 6444459, async page read
[ 5146.507750] Buffer I/O error on dev sdb, logical block 6444459, async page read
[ 5146.507759] Buffer I/O error on dev sdb, logical block 6444460, async page read
[ 5146.507764] Buffer I/O error on dev sdb, logical block 6444460, async page read
[ 5146.507769] Buffer I/O error on dev sdb, logical block 6444460, async page read
[ 5146.507774] Buffer I/O error on dev sdb, logical block 6444460, async page read
[ 5146.507781] Buffer I/O error on dev sdb, logical block 6444461, async page read
[ 5146.507786] Buffer I/O error on dev sdb, logical block 6444461, async page read
[ 5151.511701] buffer_io_error: 1050911 callbacks suppressed
[ 5151.511703] Buffer I/O error on dev sdb, logical block 6707189, async page read
[ 5151.511710] Buffer I/O error on dev sdb, logical block 6707189, async page read
[ 5151.511714] Buffer I/O error on dev sdb, logical block 6707189, async page read
[ 5151.511720] Buffer I/O error on dev sdb, logical block 6707190, async page read
[ 5151.511725] Buffer I/O error on dev sdb, logical block 6707190, async page read
[ 5151.511730] Buffer I/O error on dev sdb, logical block 6707190, async page read
[ 5151.511734] Buffer I/O error on dev sdb, logical block 6707190, async page read
[ 5151.511742] Buffer I/O error on dev sdb, logical block 6707191, async page read
[ 5151.511750] Buffer I/O error on dev sdb, logical block 6707191, async page read
[ 5151.511755] Buffer I/O error on dev sdb, logical block 6707191, async page read
[ 5156.515659] buffer_io_error: 1048253 callbacks suppressed
[ 5156.515660] Buffer I/O error on dev sdb, logical block 6969255, async page read
[ 5156.515667] Buffer I/O error on dev sdb, logical block 6969255, async page read
[ 5156.515671] Buffer I/O error on dev sdb, logical block 6969255, async page read
[ 5156.515675] Buffer I/O error on dev sdb, logical block 6969255, async page read
[ 5156.515680] Buffer I/O error on dev sdb, logical block 6969256, async page read
[ 5156.515685] Buffer I/O error on dev sdb, logical block 6969256, async page read
[ 5156.515689] Buffer I/O error on dev sdb, logical block 6969256, async page read
[ 5156.515694] Buffer I/O error on dev sdb, logical block 6969256, async page read
[ 5156.515700] Buffer I/O error on dev sdb, logical block 6969257, async page read
[ 5156.515705] Buffer I/O error on dev sdb, logical block 6969257, async page read
[ 5161.519623] buffer_io_error: 1045653 callbacks suppressed
[ 5161.519625] Buffer I/O error on dev sdb, logical block 7230670, async page read
[ 5161.519637] Buffer I/O error on dev sdb, logical block 7230671, async page read
[ 5161.519641] Buffer I/O error on dev sdb, logical block 7230671, async page read
[ 5161.519644] Buffer I/O error on dev sdb, logical block 7230671, async page read
[ 5161.519648] Buffer I/O error on dev sdb, logical block 7230671, async page read
[ 5161.519652] Buffer I/O error on dev sdb, logical block 7230672, async page read
[ 5161.519656] Buffer I/O error on dev sdb, logical block 7230672, async page read
[ 5161.519659] Buffer I/O error on dev sdb, logical block 7230672, async page read
[ 5161.519663] Buffer I/O error on dev sdb, logical block 7230672, async page read
[ 5161.519667] Buffer I/O error on dev sdb, logical block 7230673, async page read
[ 6600.118508] systemd-fstab-generator[365322]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
[ 6641.626115] systemd-fstab-generator[366481]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
root@debianal1:~# ~logicallogicallogicallogicalroot@debianal1:~# dmesg
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Linux version 5.10.0-14-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.113-1 (2022-04-29)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-amd64 root=UUID=27e2d271-9451-4d93-9525-781b5ce0623b ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c837cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c837d000-0x00000000c8383fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c8384000-0x00000000c8cbdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8cbe000-0x00000000c8f3afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8f3b000-0x00000000da25dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da25e000-0x00000000da5cbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da5cc000-0x00000000da609fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da60a000-0x00000000da6cdfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da6ce000-0x00000000daf7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daf7f000-0x00000000daffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda69a000 ACPI 2.0=0xda69a000 SMBIOS=0xf04c0 MOKvar=0xd7bc0000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. B85M-HD3/B85M-HD3, BIOS F12 08/13/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3492.082 MHz processor
[ 0.000482] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000484] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000489] last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000492] MTRR default type: uncachable
2983415615272] e820: update [mem 0xce170000-0xce184fff] usable ==> reserved23f]09 AMI 00010013)
-bash: ~logicallogicallogicallogicalroot@debianal1:~# : commande introuvable
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: erreur de syntaxe près du symbole inattendu « ( »
-bash: [: « ] » manquant
-bash: [: « ] » manquant
-bash: 29834152 : commande introuvable
-bash: 29834153 : commande introuvable
-bash: 29834154 : commande introuvable
-bash: 29834155 : commande introuvable
-bash: 29834156 : commande introuvable
-bash: 29834152 : commande introuvable
-bash: 29834153 : commande introuvable
-bash: 29834154 : commande introuvable
-bash: 29834155 : commande introuvable
-bash: 29834156 : commande introuvable
-bash: 29834152 : commande introuvable
-bash: 29834153 : commande introuvable
-bash: 29834154 : commande introuvable
-bash: 29834155 : commande introuvable
-bash: 29834156 : commande introuvable
root@debianal1:~#

J'ai fait un debugfs qui donne:

root@debianal1:~# debugfs
debugfs 1.46.2 (28-Feb-2021)
debugfs: open /dev/sdc
debugfs: Bad magic number in super-block while trying to open /dev/sdc
Found a gpt partition table in /dev/sdc
debugfs:

(https://www.vincentliefooghe.net/conten … -un-disque)

Dernière modification par alainr2109 (23-05-2022 03:16:03)

raleur · 23-05-2022 18:22:43

alainr2109 a écrit :

[ 5026.382801] usb 2-4: USB disconnect, device number 2
[ 5026.382803] usb 2-4.1: USB disconnect, device number 8
[ 5026.382890] rndis_host 2-4.1:1.0 usb0: unregister 'rndis_host' usb-0000:00:14.0-4.1, RNDIS device
[ 5026.405735] usb 2-4.3: USB disconnect, device number 6
[ 5026.413622] scsi 7:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[ 5026.413627] scsi 7:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 09 68 00 00 00 80 00
[ 5026.413629] blk_update_request: I/O error, dev sdb, sector 616448 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 5026.413675] Buffer I/O error on dev sdb, logical block 77056, async page read
(couic répétitions)
[ 5026.438934] usb 2-4.4: USB disconnect, device number 7
[ 5026.456293] sd 8:0:0:0: [sdc] Synchronizing SCSI cache
[ 5026.456318] sd 8:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 5026.752612] usb 2-4: new high-speed USB device number 9 using xhci_hcd
[ 5026.910893] usb 2-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
[ 5026.910897] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5026.910898] usb 2-4: Product: USB2.1 Hub
[ 5026.910900] usb 2-4: Manufacturer: GenesysLogic
[ 5026.911578] hub 2-4:1.0: USB hub found
[ 5026.911846] hub 2-4:1.0: 4 ports detected

D'après ces messages il semble qu'un hub USB "GenesysLogic" (interne ou externe ?) a été déconnecté, déconnectant avec lui trois périphériques USB, deux supports de stockage et un adaptateur réseau ou mobile Huawei. S'ensuivent une rafale d'erreurs d'accès à sdb qui n'est plus accessible, puis le hub et les trois périphériques sont immédiatement reconnectés.

Dernière modification par raleur (23-05-2022 18:23:45)

alainr2109 · 23-05-2022 20:53:16

Oui, ça arrive souvent, je pense que la rallonge USB qui est pluggée sur mon pc n'est pas bien attachée au hub, externe
(j'ai fait un nœud comme on fait avec une rallonge électrique mais cela semble insuffisant).

Je ne sais pas comment consolider cette connexion, c'est vraiment embêtant, mais ça n'a rien à voir avec mon problème, me semble-t-il.
Par contre ce qui me parait suspicieux, c'est la carte SD qui est sur une porteuse-clef USB. Soit la carte, soit la porteuse, pourrait être à l'origine du problème.
Je pense faire un test avec F3 tools (f3 - Fight Flash Fraud).

Je te passerai les résultats dès que j'ai réalisé les tests.

Dernière modification par alainr2109 (23-05-2022 20:55:16)

alainr2109 · 23-05-2022 21:32:05

ça y est la question est résolue en pratique
(bien sur la compréhension n'a pas été achevée, mais, pour l'instant, je vais m’atteler à refaire une install propre et durable):

f3brew /de/sdb m'a bouffé l'accès à ma clef

root@debianal1:~# gdisk
GPT fdisk (gdisk) version 1.0.6

Type device filename, or press <Enter> to exit: /dev/sdb
Warning: Partition table header claims that the size of partition table
entries is 423625982 bytes, but this program supports only 128-byte entries.
Adjusting accordingly, but partition table may be garbage.
Partition table scan:
MBR: not present
BSD: not present
APM: not present
GPT: not present

Creating new GPT entries in memory.

Command (? for help):

A moins qu'il n'y aie encore une solution pour récupérer mes données ?

Par exemple testdisk ?

J'essaie et je te passe le résultat

alainr2109 · 23-05-2022 23:54:15

D'abord, j'ai fait un probe
root@debianal1:~# f3probe /dev/sdb
F3 probe 8.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.

WARNING: Probing normally takes from a few seconds to 15 minutes, but
it can take longer. Please be patient.

Probe finished, recovering blocks... Done

Good news: The device `/dev/sdb' is the real thing

Device geometry:
   *Usable* size: 119.08 GB (249737216 blocks)
   Announced size: 119.08 GB (249737216 blocks)
   Module: 128.00 GB (2^37 Bytes)
Approximate cache size: 0.00 Byte (0 blocks), need-reset=no
   Physical block size: 512.00 Byte (2^9 Bytes)

Probe time: 2'32"
root@debianal1:~#

Ce qui montre au moins que cette carte SD n'est pas une fausse carte qui mentirait sur ses capacités.
Ensuite j'ai fait un testdisk /dev/sdb
le programme a écrit une dizaine de lignes avec Linux + je sais plus quoi
J'en ai pris une, et j'ai fait une analyse plus profonde, et il a rien trouvé ou c'est moi qui sait pas manier le logiciel
Je l'ai quitté, puis j'ai relancé et la il ne voit plus rien !!!!!
J'ai l'impression que les carottes sont cuites pour cette carte SD
et de plus je viens de recevoir un message sur Debian Mailing Lists de fautvoirplusclair@gmail.com
où il me propose d'installer une version allégée (qui occupe sur le disque entre 3,8Go et 5,3Go selon les versions ) de Debian Bullseye, avec un suivi (un fil rouge).
La 5,3 Go comprend tout ce qu'il faut pour l'internet, la messagerie mail, de l'audio, photo, video en usage et en retouche,
de la programmation ponctuelle et tout ce qui va bien pour scanner et imprimer.
Je crois que je vais suivre le fil rouge.
Merci encore pour ton aide
Alain

raleur · 24-05-2022 22:30:36

f3 a besoin d'écrire des motifs à différents endroits de la clé pour la tester. En clair, tu as écrasé le contenu de la clé.

alainr2109 · 24-05-2022 22:59:46

Et donc, y a-i-il encore moyen de récupérer mes données sur la clef ?

Dernière modification par alainr2109 (24-05-2022 23:00:02)

raleur · 25-05-2022 08:15:54

Tu connais la position des partitions :

Disk sdb: 119.1 GiB, 127865454592 bytes, 249737216 sectors

Disk identifier: 75AB403F-1DC7-4D15-A87C-7A7E8F1F1F40

          Start       End   Sectors  Size Type

sdb1       2048   1050623   1048576  512M EFI System

sdb2    1050624 166823935 165773312   79G Linux filesystem

sdb3  247736320 249735167   1998848  976M Linux swap

sdb4  166823936 247736319  80912384 38.6G Microsoft basic data

Tu peux recréer la partition Linux à l'emplacement exact (sans effacer son contenu) et essayer de la monter. Ou bien monter la clé en loop avec l'offset correspondant (start sector * 512).
Sinon, il reste l'analyse forensique avec photorec ou équivalent pour récupérer des contenus de fichiers sans noms ni chemins.

alainr2109 · 25-05-2022 08:23:35

Bon, finalement, j'ai reformaté la clef de la manière suivante:

Résultat de gdisk /dev/sdb p:

Number Start (sector) End (sector) Size Code Name
1 10240 71679 30.0 MiB EF02
2 71680 6025215 2.8 GiB 8300
3 6025216 128905215 58.6 GiB 8300
4 128905216 133001215 2.0 GiB 8300
5 133001216 155529215 10.7 GiB 8300
6 155529216 157577215 1000.0 MiB 8300
7 157577216 198537215 19.5 GiB 8300 Bur_Doc_Livres
8 198537216 239497215 19.5 GiB 8300 .reserved
9 239497216 249733119 4.9 GiB 8200

fdisk -l donne:

Disque /dev/sdb : 119,08 GiB, 127865454592 octets, 249737216 secteurs
Modèle de disque : STORAGE DEVICE
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 947326D8-2573-4443-8073-152A81706AF4

Périphérique Début Fin Secteurs Taille Type
/dev/sdb1 10240 71679 61440 30M Amorçage BIOS
/dev/sdb2 71680 6025215 5953536 2,8G Système de fichiers Linux
/dev/sdb3 6025216 128905215 122880000 58,6G Système de fichiers Linux
/dev/sdb4 128905216 133001215 4096000 2G Système de fichiers Linux
/dev/sdb5 133001216 155529215 22528000 10,7G Système de fichiers Linux
/dev/sdb6 155529216 157577215 2048000 1000M Système de fichiers Linux
/dev/sdb7 157577216 198537215 40960000 19,5G Système de fichiers Linux
/dev/sdb8 198537216 239497215 40960000 19,5G Système de fichiers Linux
/dev/sdb9 239497216 249733119 10235904 4,9G Partition d'échange Linux

Et lshw :
-volume:7
description: EXT4 volume
fabriquant: Linux
identifiant matériel: 8
nom logique: /dev/sdb8
version: 1.0
numéro de série: b2e23889-120b-4223-9273-bf7658d65806
taille: 19GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2022-05-25 02:59:50 filesystem=ext4 modified=2022-05-25 02:59:54 name=.reserved state=clean

Je voudrais que la partition /dev/sdb8 soit cachée pour tout ce qui est firefox, mails et autres contenus de logiciels déportés du home
et je ne sais pas comment faire...

Et d'autre part le résultat suivant est-il inquiétant ?
(étant donné que pour dev/sdb tout a l'air normal)

root@debianal1:~# gdisk
GPT fdisk (gdisk) version 1.0.6

Type device filename, or press <Enter> to exit: /dev/sdb8
Warning: Partition table header claims that the size of partition table
entries is 0 bytes, but this program supports only 128-byte entries.
Adjusting accordingly, but partition table may be garbage.
Warning: Partition table header claims that the size of partition table
entries is 0 bytes, but this program supports only 128-byte entries.
Adjusting accordingly, but partition table may be garbage.
Partition table scan:
MBR: not present
BSD: not present
APM: not present
GPT: not present

Creating new GPT entries in memory.

Command (? for help): q

Merci

raleur · 25-05-2022 08:39:57

alainr2109 a écrit :

Bon, finalement, j'ai reformaté la clef

Tu peux donc jeter tout ce sujet à la poubelle (tout ça pour ça) et en ouvrir un nouveau.

alainr2109 a écrit :

/dev/sdb1 10240 71679 61440 30M Amorçage BIOS

30 Mo pour une partition BIOS boot, ce n'est pas un peu exagéré ?
La précédente table de partition contenait une partition EFI, tu as décidé de changer de mode d'amorçage ?

alainr2109 a écrit :

Je voudrais que la partition /dev/sdb8 soit cachée pour tout ce qui est firefox, mails et autres contenus de logiciels déportés du home

Pas tout compris. Il suffit de ne pas la monter, non ? Ou la monter à un endroit inaccessible aux utilisateurs normaux.

alainr2109 a écrit :

Et d'autre part le résultat suivant est-il inquiétant ?

Non, c'est la commande qui est inquiétante sur ton niveau de compréhension, pas son résultat qui est parfaitement normal. Tu veux vraiment reproduire l'erreur qui a conduit à l'ouverture de ce sujet ?

Debian-facile

#1 19-05-2022 20:46:34

Perte d'accès à ma partition Debian 11 (sur clef USB)

#2 20-05-2022 02:01:28

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#3 20-05-2022 08:43:44

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#4 20-05-2022 08:55:13

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#5 20-05-2022 12:15:33

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#6 20-05-2022 13:13:08

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#7 20-05-2022 19:51:07

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#8 20-05-2022 22:20:59

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#9 21-05-2022 09:56:30

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#10 21-05-2022 10:16:06

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#11 21-05-2022 21:40:16

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#12 22-05-2022 09:36:27

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#13 23-05-2022 02:51:57

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#14 23-05-2022 18:22:43

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#15 23-05-2022 20:53:16

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#16 23-05-2022 21:32:05

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#17 23-05-2022 23:54:15

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#18 24-05-2022 22:30:36

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#19 24-05-2022 22:59:46

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#20 25-05-2022 08:15:54

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#21 25-05-2022 08:23:35

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

#22 25-05-2022 08:39:57

Re : Perte d'accès à ma partition Debian 11 (sur clef USB)

Pied de page des forums