Bonjour,
J'ai un soucis de disque. Il s'agit d'un SSD de 2To. J'en ai acheté 2 en juin de cette année.
Le /dev/sdc qui lui n'a pas de soucis :
Disque /dev/sdc : 1,8 TiB, 2000398934016 octets, 3907029168 secteurs
Modèle de disque : CT2000BX500SSD1
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xe3fd237e
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sdc1 2048 3907029167 3907027120 1,8T 83 Linux
Le /dev/sdd qui a un soucis :
Disque /dev/sdd : 1,8 TiB, 2000398934016 octets, 3907029168 secteurs
Modèle de disque : E5F62429
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x4e441055
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sdd1 2048 3907029167 3907027120 1,8T 83 Linux
Les erreurs dans syslog :
kernel: [ 210.978336] print_req_error: I/O error, dev sdd, sector 755042568
kernel: [ 210.978378] EXT4-fs error (device sdd1): __ext4_find_entry:1449: inode #23592962: comm git: reading directory lblock 0
kernel: [ 210.978387] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:995: inode #23592962: lblock 0: comm mc: error -5 reading directory block
kernel: [ 210.978541] print_req_error: I/O error, dev sdd, sector 2048
kernel: [ 210.978544] Buffer I/O error on dev sdd1, logical block 0, lost sync page write
kernel: [ 210.978550] EXT4-fs (sdd1): I/O error while writing superblock
kernel: [ 210.978571] print_req_error: I/O error, dev sdd, sector 755042568
kernel: [ 210.978577] EXT4-fs error (device sdd1): __ext4_find_entry:1449: inode #23592962: comm git: reading directory lblock 0
kernel: [ 210.978593] print_req_error: I/O error, dev sdd, sector 2048
kernel: [ 210.978595] Buffer I/O error on dev sdd1, logical block 0, lost sync page write
kernel: [ 210.978602] EXT4-fs (sdd1): I/O error while writing superblock
kernel: [ 213.113690] print_req_error: I/O error, dev sdd, sector 755042592
kernel: [ 213.113699] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:995: inode #23592965: lblock 0: comm mc: error -5 reading directory block
kernel: [ 213.116045] EXT4-fs error (device sdd1): __ext4_find_entry:1449: inode #23592965: comm git: reading directory lblock 0
kernel: [ 213.116052] Buffer I/O error on dev sdd1, logical block 0, lost sync page write
kernel: [ 213.116074] EXT4-fs (sdd1): I/O error while writing superblock
kernel: [ 216.290658] print_req_error: I/O error, dev sdd, sector 1950615584
kernel: [ 216.290670] Aborting journal on device sdd1-8.
kernel: [ 216.290701] print_req_error: I/O error, dev sdd, sector 1950615552
kernel: [ 216.290706] Buffer I/O error on dev sdd1, logical block 243826688, lost sync page write
kernel: [ 216.290715] JBD2: Error -5 detected when updating journal superblock for sdd1-8.
kernel: [ 216.350310] print_req_error: I/O error, dev sdd, sector 0
kernel: [ 216.351098] sd 5:0:0:0: [sdd] Synchronizing SCSI cache
kernel: [ 216.351114] sd 5:0:0:0: [sdd] Stopping disk
systemd[1]: Unmounting /mnt/sdd1...
Utilisation du disque :
Filesystem Size Used Avail Use% Mounted on
/dev/sdd1 1833G 533G 1207G 29.1 [##########........................] /mnt/sdd1
smartctl -a /dev/sdd
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-20-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: CT2000BX500SSD1
Serial Number: 2151E5F62429
LU WWN Device Id: 5 00a075 1e5f62429
Firmware Version: M6CR060
User Capacity: 2000398934016 bytes [2,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Wed Aug 17 12:10:59 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2091
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 65
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 14
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 47
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 074 053 000 Old_age Always - 26 (Min/Max 19/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Unknown_SSD_Attribute 0x0030 100 100 001 Old_age Offline - 0
206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1185193952
247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 37037311
248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 264396288
249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
251 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2285041260
252 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1
253 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
SMART Error Log not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 2091 -
Selective Self-tests/Logging not supported
J'utilise ce disque pour y stocker des gros fichiers allant de 500Mo à 5Go
Avez vous une idée de la cause de ce genre de soucis ?
Merci de votre aide.
-----------------
Complètement hors sujet :
avec FF 93 j'ai cette erreur quand je tente de prévisualiser ou poster mon message :
Mauvais HTTP_REFERER. Vous avez été renvoyé(e) vers cette page par une source inconnue ou interdite. Si le problème persiste, assurez-vous que le champ « URL de base » de la page Administration » Options est correctement renseigné et que vous vous rendez sur ces forums en utilisant cette URL. Vous pourrez trouver davantage d'informations dans la documentation de FluxBB.
Et aucun soucis quand je passe par Brave 1.40.107