Bonsoir,
Mes connexions ont disparu de network-manager.
Le secure Boot est bien désactivé
Je viens de suivre les instructions ici
https://debian-facile.org/doc:materiel:wifi:detecterLa commande
Cela ne retourne rien
Je teste alors
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bda:0316 Realtek Semiconductor Corp. Card Reader
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 06cb:009a Synaptics, Inc. Metallica MIS Touch Fingerprint Reader
Bus 001 Device 004: ID 5986:2113 Acer, Inc SunplusIT Integrated Camera
Bus 001 Device 002: ID 03f0:094a HP, Inc Optical Mouse [672662-001]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
la commande
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether e8:6a:64:2c:82:85 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.39/24 brd 192.168.1.255 scope global dynamic noprefixroute enp0s31f6
valid_lft 85752sec preferred_lft 85752sec
inet6 fe80::c6c6:33d2:1f63:62c3/64 scope link noprefixroute
valid_lft forever preferred_lft forever
ensuite la commande
2.764760] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 2.765120] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 47.533694] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 47.727213] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 47.734796] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.sfi
[ 47.734804] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 47.837090] Bluetooth: hci0: Failed to send firmware data (-19)
Je ne sais pas trop comment régler le probleme ....
Merci