[ 0.000000] Linux version 5.10.0-14-lzk-bl-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Debian 5.10.113-1 (2022-04-29)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-lzk-bl-amd64 root=UUID=8d364980-95e3-4d07-884c-16ad12219ed3 ro threadirqs quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c9a173f] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c9a1740-0x000000007c9a379f] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c9a37a0-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc7900 Ultra-Slim Desktop/3033h, BIOS 786G1 v01.16 03/05/2009
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.579 MHz processor
[ 0.001205] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001209] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001215] last_pfn = 0x7c9a1 max_arch_pfn = 0x400000000
[ 0.001222] MTRR default type: uncachable
[ 0.001223] MTRR fixed ranges enabled:
[ 0.001225] 00000-9FFFF write-back
[ 0.001226] A0000-BFFFF uncachable
[ 0.001227] C0000-E3FFF write-protect
[ 0.001228] E4000-EFFFF write-back
[ 0.001230] F0000-FFFFF write-protect
[ 0.001231] MTRR variable ranges enabled:
[ 0.001232] 0 base 000000000 mask F80000000 write-back
[ 0.001234] 1 base 07CA00000 mask FFFE00000 uncachable
[ 0.001235] 2 base 07CC00000 mask FFFC00000 uncachable
[ 0.001237] 3 base 07D000000 mask FFF000000 uncachable
[ 0.001238] 4 base 07E000000 mask FFE000000 uncachable
[ 0.001239] 5 disabled
[ 0.001240] 6 disabled
[ 0.002074] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.011176] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff]
[ 0.011590] RAMDISK: [mem 0x3277f000-0x353b6fff]
[ 0.011595] ACPI: Early table checksum verification disabled
[ 0.011600] ACPI: RSDP 0x00000000000E5810 000014 (v00 COMPAQ)
[ 0.011605] ACPI: RSDT 0x000000007C9C5840 000044 (v01 HPQOEM SLIC-BPC 20090305 00000000)
[ 0.011612] ACPI: FACP 0x000000007C9C58E8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.011617] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000050/0x0 (20200925/tbfadt-615)
[ 0.011622] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20200925/tbfadt-669)
[ 0.011627] ACPI: DSDT 0x000000007C9C5E27 00A253 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.011631] ACPI: FACS 0x000000007C9C5800 000040
[ 0.011635] ACPI: APIC 0x000000007C9C595C 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.011640] ACPI: ASF! 0x000000007C9C59E0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.011644] ACPI: MCFG 0x000000007C9C5A43 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.011649] ACPI: TCPA 0x000000007C9C5A7F 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.011653] ACPI: SLIC 0x000000007C9C5AB1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.011657] ACPI: HPET 0x000000007C9C5C27 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.011662] ACPI: DMAR 0x000000007C9C5C5F 0001C8 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.011666] ACPI: Reserving FACP table memory at [mem 0x7c9c58e8-0x7c9c595b]
[ 0.011667] ACPI: Reserving DSDT table memory at [mem 0x7c9c5e27-0x7c9d0079]
[ 0.011669] ACPI: Reserving FACS table memory at [mem 0x7c9c5800-0x7c9c583f]
[ 0.011670] ACPI: Reserving APIC table memory at [mem 0x7c9c595c-0x7c9c59df]
[ 0.011671] ACPI: Reserving ASF! table memory at [mem 0x7c9c59e0-0x7c9c5a42]
[ 0.011672] ACPI: Reserving MCFG table memory at [mem 0x7c9c5a43-0x7c9c5a7e]
[ 0.011673] ACPI: Reserving TCPA table memory at [mem 0x7c9c5a7f-0x7c9c5ab0]
[ 0.011674] ACPI: Reserving SLIC table memory at [mem 0x7c9c5ab1-0x7c9c5c26]
[ 0.011675] ACPI: Reserving HPET table memory at [mem 0x7c9c5c27-0x7c9c5c5e]
[ 0.011677] ACPI: Reserving DMAR table memory at [mem 0x7c9c5c5f-0x7c9c5e26]
[ 0.011687] ACPI: Local APIC address 0xfee00000
[ 0.011756] No NUMA configuration found
[ 0.011757] Faking a node at [mem 0x0000000000000000-0x000000007c9a0fff]
[ 0.011771] NODE_DATA(0) allocated [mem 0x7c977000-0x7c9a0fff]
[ 0.012244] Zone ranges:
[ 0.012246] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012248] DMA32 [mem 0x0000000001000000-0x000000007c9a0fff]
[ 0.012250] Normal empty
[ 0.012252] Device empty
[ 0.012253] Movable zone start for each node
[ 0.012257] Early memory node ranges
[ 0.012258] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012260] node 0: [mem 0x0000000000100000-0x000000007c9a0fff]
[ 0.012262] Initmem setup node 0 [mem 0x0000000000001000-0x000000007c9a0fff]
[ 0.012264] On node 0 totalpages: 510271
[ 0.012265] DMA zone: 64 pages used for memmap
[ 0.012266] DMA zone: 21 pages reserved
[ 0.012268] DMA zone: 3998 pages, LIFO batch:0
[ 0.012269] DMA32 zone: 7911 pages used for memmap
[ 0.012271] DMA32 zone: 506273 pages, LIFO batch:63
[ 0.012277] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.012342] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.014661] On node 0, zone DMA32: 13919 pages in unavailable ranges
[ 0.014674] Reserving Intel graphics memory at [mem 0x7d000000-0x7effffff]
[ 0.014803] ACPI: PM-Timer IO Port: 0xf808
[ 0.014806] ACPI: Local APIC address 0xfee00000
[ 0.014816] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.014817] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.014819] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.014820] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.014832] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.014834] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014837] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014839] ACPI: IRQ0 used by override.
[ 0.014840] ACPI: IRQ9 used by override.
[ 0.014843] Using ACPI (MADT) for SMP configuration information
[ 0.014845] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014855] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.014871] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.014874] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.014875] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.014876] PM: hibernation: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.014879] [mem 0x7f000000-0xf3ffffff] available for PCI devices
[ 0.014881] Booting paravirtualized kernel on bare hardware
[ 0.014886] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.020727] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.021546] percpu: Embedded 59 pages/cpu s200920 r8192 d32552 u524288
[ 0.021556] pcpu-alloc: s200920 r8192 d32552 u524288 alloc=1*2097152
[ 0.021559] pcpu-alloc: [0] 0 1 2 3
[ 0.021609] Built 1 zonelists, mobility grouping on. Total pages: 502275
[ 0.021612] Policy zone: DMA32
[ 0.021615] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-lzk-bl-amd64 root=UUID=8d364980-95e3-4d07-884c-16ad12219ed3 ro threadirqs quiet
[ 0.022513] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022962] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.023031] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.023052] DMAR: [Firmware Bug]: Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
BIOS vendor: Hewlett-Packard; Ver: 786G1 v01.16; Product Version:
[ 0.029100] Memory: 261408K/2041084K available (12295K kernel code, 2598K rwdata, 4112K rodata, 2356K init, 3632K bss, 115204K reserved, 0K cma-reserved)
[ 0.029116] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[ 0.029294] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.029317] Kernel/User page tables isolation: enabled
[ 0.029347] ftrace: allocating 36480 entries in 143 pages
[ 0.044801] ftrace: allocated 143 pages with 5 groups
[ 0.045088] rcu: Preemptible hierarchical RCU implementation.
[ 0.045091] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.045093] Trampoline variant of Tasks RCU enabled.
[ 0.045093] Rude variant of Tasks RCU enabled.
[ 0.045094] Tracing variant of Tasks RCU enabled.
[ 0.045096] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.045097] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.049938] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.052468] Console: colour VGA+ 80x25
[ 0.052482] printk: console [tty0] enabled
[ 0.052505] ACPI: Core revision 20200925
[ 0.052605] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.052620] APIC: Switch to symmetric I/O mode setup
[ 0.052624] DMAR: Host address width 36
[ 0.052626] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.052637] DMAR: Failed to map dmar0
[ 0.052682] DMAR: Parse DMAR table failure.
[ 0.053035] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057620] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25628a618e5, max_idle_ns: 440795286278 ns
[ 0.057628] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.15 BogoMIPS (lpj=2593579)
[ 0.057631] pid_max: default: 32768 minimum: 301
[ 0.057662] LSM: Security Framework initializing
[ 0.057673] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.057721] AppArmor: AppArmor initialized
[ 0.057724] TOMOYO Linux initialized
[ 0.057755] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.057770] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.058130] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.058193] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.058197] process: using mwait in idle threads
[ 0.058202] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.058203] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.058207] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.058209] Spectre V2 : Mitigation: Retpolines
[ 0.058210] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.058211] Speculative Store Bypass: Vulnerable
[ 0.058214] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.058333] Freeing SMP alternatives memory: 32K
[ 0.162021] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.162316] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.162327] ... version: 2
[ 0.162328] ... bit width: 40
[ 0.162329] ... generic registers: 2
[ 0.162330] ... value mask: 000000ffffffffff
[ 0.162331] ... max period: 000000007fffffff
[ 0.162332] ... fixed-purpose events: 3
[ 0.162333] ... event mask: 0000000700000003
[ 0.162476] rcu: Hierarchical SRCU implementation.
[ 0.162808] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.162922] smp: Bringing up secondary CPUs ...
[ 0.163104] x86: Booting SMP configuration:
[ 0.163106] .... node #0, CPUs: #1
[ 0.164642] smp: Brought up 1 node, 2 CPUs
[ 0.164645] smpboot: Max logical packages: 2
[ 0.164647] smpboot: Total of 2 processors activated (10374.31 BogoMIPS)
[ 0.180516] node 0 deferred pages initialised in 14ms
[ 0.180685] devtmpfs: initialized
[ 0.180703] x86/mm: Memory block size: 128MB
[ 0.181099] PM: Registering ACPI NVS region [mem 0x7c9a1740-0x7c9a379f] (8288 bytes)
[ 0.181099] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.181099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.181099] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.181099] pinctrl core: initialized pinctrl subsystem
[ 0.181118] NET: Registered protocol family 16
[ 0.181225] audit: initializing netlink subsys (disabled)
[ 0.181655] audit: type=2000 audit(1663423390.129:1): state=initialized audit_enabled=0 res=1
[ 0.181788] thermal_sys: Registered thermal governor 'fair_share'
[ 0.181789] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.181791] thermal_sys: Registered thermal governor 'step_wise'
[ 0.181792] thermal_sys: Registered thermal governor 'user_space'
[ 0.181793] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.181813] cpuidle: using governor ladder
[ 0.181819] cpuidle: using governor menu
[ 0.181859] ACPI: bus type PCI registered
[ 0.181861] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.181965] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.181969] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.181991] PCI: Using configuration type 1 for base access
[ 0.182667] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.182668] mtrr: probably your BIOS does not setup all CPUs.
[ 0.182669] mtrr: corrected configuration.
[ 0.183753] Kprobes globally optimized
[ 0.183759] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.404827] ACPI: Added _OSI(Module Device)
[ 0.404827] ACPI: Added _OSI(Processor Device)
[ 0.404827] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.404827] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.404827] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.404827] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.404827] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.407065] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.408938] ACPI: Dynamic OEM Table Load:
[ 0.408946] ACPI: SSDT 0xFFFF92B8C134C000 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.409392] ACPI: Dynamic OEM Table Load:
[ 0.409397] ACPI: SSDT 0xFFFF92B930A85400 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.410127] ACPI: Interpreter enabled
[ 0.410150] ACPI: (supports S0 S3 S4 S5)
[ 0.410153] ACPI: Using IOAPIC for interrupt routing
[ 0.410181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.410352] ACPI: Enabled 11 GPEs in block 00 to 3F
[ 0.415747] acpi LNXCPU:00: Invalid PBLK length [7]
[ 0.415806] acpi LNXCPU:01: Invalid PBLK length [7]
[ 0.416034] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.416040] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.416045] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200925/nsarguments-162)
[ 0.416155] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200925/dsfield-184)
[ 0.416220] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200925/dswload2-477)
[ 0.416275] ACPI Error: Aborting method \_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200925/psparse-529)
[ 0.416343] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.416354] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.416718] PCI host bridge to bus 0000:00
[ 0.416721] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[ 0.416723] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.416725] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff window]
[ 0.416726] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff window]
[ 0.416728] pci_bus 0000:00: root bus resource [io 0x7000-0xafff window]
[ 0.416730] pci_bus 0000:00: root bus resource [io 0xb000-0xffff window]
[ 0.416731] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.416733] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xf3ffffff window]
[ 0.416734] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.416736] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.416751] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[ 0.416773] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.416775] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[ 0.416870] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[ 0.416880] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.416886] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.416891] pci 0000:00:02.0: reg 0x20: [io 0x1230-0x1237]
[ 0.417006] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[ 0.417015] pci 0000:00:02.1: reg 0x10: [mem 0xf0400000-0xf04fffff 64bit]
[ 0.417126] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[ 0.417147] pci 0000:00:03.0: reg 0x10: [mem 0xf0527100-0xf052710f 64bit]
[ 0.417230] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.417319] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[ 0.417328] pci 0000:00:03.2: reg 0x10: [io 0x1238-0x123f]
[ 0.417334] pci 0000:00:03.2: reg 0x14: [io 0x1260-0x1263]
[ 0.417341] pci 0000:00:03.2: reg 0x18: [io 0x1240-0x1247]
[ 0.417348] pci 0000:00:03.2: reg 0x1c: [io 0x1264-0x1267]
[ 0.417354] pci 0000:00:03.2: reg 0x20: [io 0x1220-0x122f]
[ 0.417462] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[ 0.417472] pci 0000:00:03.3: reg 0x10: [io 0x1248-0x124f]
[ 0.417478] pci 0000:00:03.3: reg 0x14: [mem 0xf0524000-0xf0524fff]
[ 0.417635] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[ 0.417648] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[ 0.417656] pci 0000:00:19.0: reg 0x14: [mem 0xf0525000-0xf0525fff]
[ 0.417663] pci 0000:00:19.0: reg 0x18: [io 0x1100-0x111f]
[ 0.417720] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.417838] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[ 0.417877] pci 0000:00:1a.0: reg 0x20: [io 0x1120-0x113f]
[ 0.418014] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[ 0.418053] pci 0000:00:1a.1: reg 0x20: [io 0x1140-0x115f]
[ 0.418186] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[ 0.418225] pci 0000:00:1a.2: reg 0x20: [io 0x1160-0x117f]
[ 0.418367] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[ 0.418382] pci 0000:00:1a.7: reg 0x10: [mem 0xf0526800-0xf0526bff]
[ 0.418461] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.418573] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[ 0.418589] pci 0000:00:1b.0: reg 0x10: [mem 0xf0520000-0xf0523fff 64bit]
[ 0.418675] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.418774] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
[ 0.418851] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.418976] pci 0000:00:1c.4: [8086:3a78] type 01 class 0x060400
[ 0.419053] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.419177] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[ 0.419215] pci 0000:00:1d.0: reg 0x20: [io 0x1180-0x119f]
[ 0.419362] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[ 0.419401] pci 0000:00:1d.1: reg 0x20: [io 0x11a0-0x11bf]
[ 0.419534] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[ 0.419573] pci 0000:00:1d.2: reg 0x20: [io 0x11c0-0x11df]
[ 0.419727] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[ 0.419743] pci 0000:00:1d.7: reg 0x10: [mem 0xf0526c00-0xf0526fff]
[ 0.419822] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.419929] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.420078] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[ 0.420271] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
[ 0.420283] pci 0000:00:1f.2: reg 0x10: [io 0x1250-0x1257]
[ 0.420290] pci 0000:00:1f.2: reg 0x14: [io 0x1268-0x126b]
[ 0.420297] pci 0000:00:1f.2: reg 0x18: [io 0x1258-0x125f]
[ 0.420304] pci 0000:00:1f.2: reg 0x1c: [io 0x126c-0x126f]
[ 0.420311] pci 0000:00:1f.2: reg 0x20: [io 0x11e0-0x11ff]
[ 0.420319] pci 0000:00:1f.2: reg 0x24: [mem 0xf0526000-0xf05267ff]
[ 0.420358] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.420525] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.420598] pci 0000:00:1c.4: PCI bridge to [bus 30]
[ 0.420621] pci_bus 0000:07: extended config space not accessible
[ 0.420743] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.420752] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[ 0.420754] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.420756] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff window] (subtractive decode)
[ 0.420758] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff window] (subtractive decode)
[ 0.420759] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff window] (subtractive decode)
[ 0.420761] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff window] (subtractive decode)
[ 0.420762] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.420764] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xf3ffffff window] (subtractive decode)
[ 0.420766] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.421183] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.421252] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.421319] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.421385] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.421451] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.421516] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.421582] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.421652] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.421930] iommu: Default domain type: Translated
[ 0.421952] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.421952] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.421952] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.421952] vgaarb: loaded
[ 0.421952] EDAC MC: Ver: 3.0.0
[ 0.421952] NetLabel: Initializing
[ 0.421952] NetLabel: domain hash size = 128
[ 0.421952] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.421952] NetLabel: unlabeled traffic allowed by default
[ 0.421952] PCI: Using ACPI for IRQ routing
[ 0.423953] PCI: pci_cache_line_size set to 64 bytes
[ 0.424005] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.424007] e820: reserve RAM buffer [mem 0x7c9a1740-0x7fffffff]
[ 0.424084] hpet: 8 channels of 4 reserved for per-cpu timers
[ 0.424087] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 24, 25, 26, 27, 0
[ 0.424095] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.425661] clocksource: Switched to clocksource tsc-early
[ 0.442805] VFS: Disk quotas dquot_6.6.0
[ 0.442832] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.443023] AppArmor: AppArmor Filesystem Enabled
[ 0.443052] pnp: PnP ACPI init
[ 0.443158] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.443189] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.443216] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.443446] pnp 00:03: [dma 2]
[ 0.443478] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.443524] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.443793] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.443851] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.443856] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.443913] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.443915] system 00:07: [io 0x0420-0x043f] has been reserved
[ 0.443917] system 00:07: [io 0x0440-0x045f] has been reserved
[ 0.443919] system 00:07: [io 0x0460-0x047f] has been reserved
[ 0.443921] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.443923] system 00:07: [io 0x0880-0x08ff] has been reserved
[ 0.443925] system 00:07: [io 0xf800-0xf81f] has been reserved
[ 0.443927] system 00:07: [io 0xf820-0xf83f] has been reserved
[ 0.443928] system 00:07: [io 0xf840-0xf85f] has been reserved
[ 0.443930] system 00:07: [io 0xf860-0xf87f] has been reserved
[ 0.443932] system 00:07: [io 0xfa00-0xfa3f] has been reserved
[ 0.443933] system 00:07: [io 0xfc00-0xfc7f] has been reserved
[ 0.443935] system 00:07: [io 0xfc80-0xfcff] has been reserved
[ 0.443937] system 00:07: [io 0xfe00-0xfe7f] has been reserved
[ 0.443939] system 00:07: [io 0xfe80-0xfeff] has been reserved
[ 0.443944] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444234] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.444237] system 00:08: [mem 0x00100000-0x7effffff] could not be reserved
[ 0.444239] system 00:08: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.444241] system 00:08: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.444243] system 00:08: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.444245] system 00:08: [mem 0xfed45000-0xffffffff] has been reserved
[ 0.444246] system 00:08: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.444248] system 00:08: [mem 0x000ce400-0x000e3fff] has been reserved
[ 0.444254] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.444265] pnp: PnP ACPI: found 9 devices
[ 0.450748] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.450833] NET: Registered protocol family 2
[ 0.450948] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.451412] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.451459] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.451560] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.451595] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.451743] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.451783] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.451829] NET: Registered protocol family 1
[ 0.451836] NET: Registered protocol family 44
[ 0.451856] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
[ 0.451859] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000
[ 0.451862] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000 add_align 100000
[ 0.451864] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
[ 0.451866] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 add_align 100000
[ 0.451869] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 add_align 100000
[ 0.451885] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[ 0.451891] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.451893] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[ 0.451897] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.451902] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.451904] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.451909] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.451912] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.451917] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.451920] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.451925] pci 0000:00:1c.4: PCI bridge to [bus 30]
[ 0.451927] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.451931] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff]
[ 0.451934] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.451940] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.451950] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window]
[ 0.451951] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window]
[ 0.451953] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff window]
[ 0.451954] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff window]
[ 0.451956] pci_bus 0000:00: resource 8 [io 0x7000-0xafff window]
[ 0.451957] pci_bus 0000:00: resource 9 [io 0xb000-0xffff window]
[ 0.451959] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[ 0.451961] pci_bus 0000:00: resource 11 [mem 0x7f000000-0xf3ffffff window]
[ 0.451962] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window]
[ 0.451964] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.451966] pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.451967] pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.451969] pci_bus 0000:30: resource 0 [io 0x3000-0x3fff]
[ 0.451970] pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff]
[ 0.451972] pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.451974] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff window]
[ 0.451975] pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7 window]
[ 0.451977] pci_bus 0000:07: resource 6 [io 0x1000-0x2fff window]
[ 0.451978] pci_bus 0000:07: resource 7 [io 0x3000-0x6fff window]
[ 0.451980] pci_bus 0000:07: resource 8 [io 0x7000-0xafff window]
[ 0.451981] pci_bus 0000:07: resource 9 [io 0xb000-0xffff window]
[ 0.451983] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window]
[ 0.451984] pci_bus 0000:07: resource 11 [mem 0x7f000000-0xf3ffffff window]
[ 0.451986] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff window]
[ 0.452055] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.454044] PCI: CLS 64 bytes, default 64
[ 0.454120] Trying to unpack rootfs image as initramfs...
[ 0.508633] random: fast init done
[ 1.350628] Freeing initrd memory: 45280K
[ 1.351337] Initialise system trusted keyrings
[ 1.351353] Key type blacklist registered
[ 1.351460] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[ 1.353169] zbud: loaded
[ 1.353417] integrity: Platform Keyring initialized
[ 1.353420] Key type asymmetric registered
[ 1.353422] Asymmetric key parser 'x509' registered
[ 1.353433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.353499] io scheduler mq-deadline registered
[ 1.353983] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.353999] intel_idle: MWAIT substates: 0x22220
[ 1.354053] Monitor-Mwait will be used to enter C-1 state
[ 1.354069] Monitor-Mwait will be used to enter C-2 state
[ 1.354075] ACPI: \_PR_.CPU0: Found 2 idle states
[ 1.354078] intel_idle: v0.5.1 model 0x17
[ 1.354162] intel_idle: Local APIC timer is reliable in C1
[ 1.354499] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.355248] 0000:00:03.3: ttyS0 at I/O 0x1248 (irq = 17, base_baud = 115200) is a 16550A
[ 1.355467] Linux agpgart interface v0.103
[ 1.355578] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 1.355773] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.358649] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.358691] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.358806] mousedev: PS/2 mouse device common for all mice
[ 1.358853] rtc_cmos 00:00: RTC can wake from S4
[ 1.359097] rtc_cmos 00:00: registered as rtc0
[ 1.359123] rtc_cmos 00:00: setting system clock to 2022-09-17T14:03:12 UTC (1663423392)
[ 1.359148] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.359160] intel_pstate: CPU model not supported
[ 1.359180] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.359671] NET: Registered protocol family 10
[ 1.370926] Segment Routing with IPv6
[ 1.370962] mip6: Mobile IPv6
[ 1.370966] NET: Registered protocol family 17
[ 1.371014] mpls_gso: MPLS GSO support
[ 1.371219] microcode: sig=0x1067a, pf=0x1, revision=0xa07
[ 1.371227] microcode: Microcode Update Driver: v2.2.
[ 1.371234] IPI shorthand broadcast: enabled
[ 1.371244] sched_clock: Marking stable (1368670144, 2467877)->(1376079638, -4941617)
[ 1.371349] registered taskstats version 1
[ 1.371354] Loading compiled-in X.509 certificates
[ 1.422164] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.422181] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.422215] zswap: loaded using pool lzo/zbud
[ 1.422352] Key type ._fscrypt registered
[ 1.422353] Key type .fscrypt registered
[ 1.422355] Key type fscrypt-provisioning registered
[ 1.422402] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.424902] Freeing unused kernel image (initmem) memory: 2356K
[ 1.425676] Write protecting the kernel read-only data: 20480k
[ 1.427006] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.428188] Freeing unused kernel image (rodata/data gap) memory: 2032K
[ 1.477392] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.477404] x86/mm: Checking user space page tables
[ 1.524813] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.524825] Run /init as init process
[ 1.524827] with arguments:
[ 1.524828] /init
[ 1.524829] with environment:
[ 1.524830] HOME=/
[ 1.524831] TERM=linux
[ 1.524832] BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-lzk-bl-amd64
[ 1.606913] button: module verification failed: signature and/or required key missing - tainting kernel
[ 1.607255] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.614714] ACPI: Power Button [PBTN]
[ 1.614806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.618669] ACPI: Power Button [PWRF]
[ 1.633157] FDC 0 is a National Semiconductor PC87306
[ 1.634647] SCSI subsystem initialized
[ 1.639909] pps_core: LinuxPPS API ver. 1 registered
[ 1.639913] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.640550] PTP clock support registered
[ 1.654380] ACPI: bus type USB registered
[ 1.654416] usbcore: registered new interface driver usbfs
[ 1.654431] usbcore: registered new interface driver hub
[ 1.654447] usbcore: registered new device driver usb
[ 1.661409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.661794] ehci-pci: EHCI PCI platform driver
[ 1.662044] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.662052] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.662065] ehci-pci 0000:00:1a.7: debug port 1
[ 1.662300] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.664870] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.664873] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.665127] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.665987] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.668688] libata version 3.00 loaded.
[ 1.670374] ahci 0000:00:1f.2: version 3.0
[ 1.670759] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.670761] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part sxs
[ 1.672836] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0526800
[ 1.679690] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.679835] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.679837] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.679839] usb usb1: Product: EHCI Host Controller
[ 1.679841] usb usb1: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 ehci_hcd
[ 1.679842] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.680130] hub 1-0:1.0: USB hub found
[ 1.680143] hub 1-0:1.0: 6 ports detected
[ 1.680796] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.680805] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.680813] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.682921] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
[ 1.683184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 1.683186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.683188] usb usb2: Product: UHCI Host Controller
[ 1.683190] usb usb2: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 uhci_hcd
[ 1.683191] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.683428] hub 2-0:1.0: USB hub found
[ 1.683441] hub 2-0:1.0: 2 ports detected
[ 1.684051] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.684069] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.684087] ehci-pci 0000:00:1d.7: debug port 1
[ 1.688046] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.689791] scsi host1: ahci
[ 1.693849] scsi host0: ata_generic
[ 1.694956] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0526c00
[ 1.695680] scsi host2: ahci
[ 1.701667] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.701705] scsi host4: ahci
[ 1.701750] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.701753] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.701754] usb usb3: Product: EHCI Host Controller
[ 1.701756] usb usb3: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 ehci_hcd
[ 1.701758] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.701928] hub 3-0:1.0: USB hub found
[ 1.701939] hub 3-0:1.0: 6 ports detected
[ 1.702360] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.702368] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.702377] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.707694] scsi host5: ahci
[ 1.707891] scsi host3: ata_generic
[ 1.707947] ata1: PATA max UDMA/100 cmd 0x1238 ctl 0x1260 bmdma 0x1220 irq 18
[ 1.707949] ata2: PATA max UDMA/100 cmd 0x1240 ctl 0x1264 bmdma 0x1228 irq 18
[ 1.709929] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
[ 1.710022] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 1.710024] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710026] usb usb4: Product: UHCI Host Controller
[ 1.710027] usb usb4: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 uhci_hcd
[ 1.710029] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.710185] hub 4-0:1.0: USB hub found
[ 1.710195] hub 4-0:1.0: 2 ports detected
[ 1.710538] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.710547] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.710554] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.713692] scsi host6: ahci
[ 1.717841] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160
[ 1.717934] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 1.717937] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.717938] usb usb5: Product: UHCI Host Controller
[ 1.717940] usb usb5: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 uhci_hcd
[ 1.717941] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.718088] hub 5-0:1.0: USB hub found
[ 1.718099] hub 5-0:1.0: 2 ports detected
[ 1.718427] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.718433] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.718440] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.721669] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180
[ 1.721746] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 1.721748] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.721749] usb usb6: Product: UHCI Host Controller
[ 1.721751] usb usb6: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 uhci_hcd
[ 1.721752] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.721894] hub 6-0:1.0: USB hub found
[ 1.721904] hub 6-0:1.0: 2 ports detected
[ 1.722208] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.722215] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.722231] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.724676] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0
[ 1.724794] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 1.724797] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.724798] usb usb7: Product: UHCI Host Controller
[ 1.724800] usb usb7: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 uhci_hcd
[ 1.724801] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.724938] hub 7-0:1.0: USB hub found
[ 1.724947] hub 7-0:1.0: 2 ports detected
[ 1.725250] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.725256] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.725262] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.727673] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0
[ 1.727801] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 1.727803] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.727805] usb usb8: Product: UHCI Host Controller
[ 1.727806] usb usb8: Manufacturer: Linux 5.10.0-14-lzk-bl-amd64 uhci_hcd
[ 1.727807] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.727939] hub 8-0:1.0: USB hub found
[ 1.727949] hub 8-0:1.0: 2 ports detected
[ 1.730621] scsi host7: ahci
[ 1.730734] ata3: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526100 irq 29
[ 1.730737] ata4: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526180 irq 29
[ 1.730738] ata5: DUMMY
[ 1.730740] ata6: DUMMY
[ 1.730741] ata7: DUMMY
[ 1.730742] ata8: DUMMY
[ 1.744847] pci 0000:00:00.0: Intel Q45/Q43 Chipset
[ 1.744864] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.745353] pci 0000:00:00.0: detected 32768K stolen memory
[ 1.745393] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.746047] Console: switching to colour dummy device 80x25
[ 1.746174] [drm] ACPI BIOS requests an excessive sleep of 4000814527 ms, using 1500 ms instead
[ 1.746590] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.811653] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 1.811900] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 1.812011] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.819877] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:55:45:16:ad
[ 1.819887] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.819918] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
[ 1.924651] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.958840] fbcon: i915drmfb (fb0) is primary device
[ 1.988338] Console: switching to colour frame buffer device 240x67
[ 2.010333] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.041761] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.043229] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2.043234] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 2.043323] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 2.043693] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
[ 2.043698] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.043702] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.043706] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.044778] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.045133] ata3.00: ATA-8: WDC WD1600BEKT-66F3T2, 13.01A13, max UDMA/100
[ 2.045137] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.046557] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2.046562] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 2.046567] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.046571] ata4.00: ATAPI: hp DVD A DS8A3L, YH3B, max UDMA/100
[ 2.046681] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2.046684] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 2.046770] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 2.047092] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
[ 2.047097] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.047101] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.047105] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.047885] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2.047887] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 2.047889] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.047893] ata4.00: configured for UDMA/100
[ 2.048531] ata3.00: configured for UDMA/100
[ 2.048709] scsi 1:0:0:0: Direct-Access ATA WDC WD1600BEKT-6 1A13 PQ: 0 ANSI: 5
[ 2.052571] scsi 2:0:0:0: CD-ROM hp DVD A DS8A3L YH3B PQ: 0 ANSI: 5
[ 2.056256] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[ 2.056261] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.056265] usb 1-1: Product: USB2.0 Hub
[ 2.056802] hub 1-1:1.0: USB hub found
[ 2.057132] hub 1-1:1.0: 4 ports detected
[ 2.084375] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 2.098209] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.098226] sd 1:0:0:0: [sda] Write Protect is off
[ 2.098230] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.098251] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.113604] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 2.113611] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.138522] sda: sda1 sda2 < sda5 >
[ 2.142708] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.142873] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.173652] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 2.303623] usb 1-2: New USB device found, idVendor=1397, idProduct=0509, bcdDevice= 1.12
[ 2.303639] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.303644] usb 1-2: Product: UMC404HD 192k
[ 2.303647] usb 1-2: Manufacturer: BEHRINGER
[ 2.388651] tsc: Refined TSC clocksource calibration: 2593.474 MHz
[ 2.388662] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2562271724f, max_idle_ns: 440795261444 ns
[ 2.388686] clocksource: Switched to clocksource tsc
[ 2.418664] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 2.498654] raid6: sse2x4 gen() 9739 MB/s
[ 2.515637] raid6: sse2x4 xor() 2906 MB/s
[ 2.532634] raid6: sse2x2 gen() 9382 MB/s
[ 2.549657] raid6: sse2x2 xor() 6211 MB/s
[ 2.566655] raid6: sse2x1 gen() 8154 MB/s
[ 2.583643] raid6: sse2x1 xor() 5047 MB/s
[ 2.583645] raid6: using algorithm sse2x4 gen() 9739 MB/s
[ 2.583646] raid6: .... xor() 2906 MB/s, rmw enabled
[ 2.583647] raid6: using ssse3x2 recovery algorithm
[ 2.584175] xor: measuring software checksum speed
[ 2.584996] prefetch64-sse : 12480 MB/sec
[ 2.585927] generic_sse : 10837 MB/sec
[ 2.585929] xor: using function: prefetch64-sse (12480 MB/sec)
[ 2.586110] usb 1-3: New USB device found, idVendor=2357, idProduct=011f, bcdDevice= 2.00
[ 2.586113] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.586114] usb 1-3: Product: 802.11ac WLAN Adapter
[ 2.586116] usb 1-3: Manufacturer: Realtek
[ 2.586118] usb 1-3: SerialNumber: 00e04c000001
[ 2.631385] Btrfs loaded, crc32c=crc32c-generic
[ 2.732810] PM: Image not found (code -22)
[ 2.784655] random: crng init done
[ 2.830662] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.890125] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.008701] usb 5-1: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[ 3.008706] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.008710] usb 5-1: Product: Dell QuietKey Keyboard
[ 3.008713] usb 5-1: Manufacturer: DELL
[ 3.191925] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.730666] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 3.909694] usb 5-2: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[ 3.909700] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.909704] usb 5-2: Product: USB-PS/2 Optical Mouse
[ 3.909707] usb 5-2: Manufacturer: Logitech
[ 4.087323] systemd[1]: Inserted module 'autofs4'
[ 4.271640] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 4.283792] systemd[1]: Detected architecture x86-64.
[ 4.292921] systemd[1]: Set hostname to <debian>.
[ 6.046176] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 6.255111] systemd[1]: Queued start job for default target Graphical Interface.
[ 6.269168] systemd[1]: Created slice system-getty.slice.
[ 6.269647] systemd[1]: Created slice system-modprobe.slice.
[ 6.269984] systemd[1]: Created slice User and Session Slice.
[ 6.270081] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.270338] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.270425] systemd[1]: Reached target User and Group Name Lookups.
[ 6.270454] systemd[1]: Reached target Remote File Systems.
[ 6.270473] systemd[1]: Reached target Slices.
[ 6.270608] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.270824] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.270957] systemd[1]: Listening on Syslog Socket.
[ 6.271090] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.271169] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.271406] systemd[1]: Listening on Journal Audit Socket.
[ 6.271543] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.271759] systemd[1]: Listening on Journal Socket.
[ 6.286017] systemd[1]: Listening on udev Control Socket.
[ 6.286173] systemd[1]: Listening on udev Kernel Socket.
[ 6.287418] systemd[1]: Mounting Huge Pages File System...
[ 6.288908] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.290665] systemd[1]: Mounting Kernel Debug File System...
[ 6.292212] systemd[1]: Mounting Kernel Trace File System...
[ 6.292522] systemd[1]: Finished Availability of block devices.
[ 6.315449] systemd[1]: Starting Set the console keyboard layout...
[ 6.317143] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.318709] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.320613] systemd[1]: Starting Load Kernel Module configfs...
[ 6.322346] systemd[1]: Starting Load Kernel Module drm...
[ 6.324199] systemd[1]: Starting Load Kernel Module fuse...
[ 6.325300] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.325395] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 6.331577] systemd[1]: Starting Journal Service...
[ 6.337334] systemd[1]: Starting Load Kernel Modules...
[ 6.340137] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.342169] systemd[1]: Starting Coldplug All udev Devices...
[ 6.345354] systemd[1]: Mounted Huge Pages File System.
[ 6.345735] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.345986] systemd[1]: Mounted Kernel Debug File System.
[ 6.346211] systemd[1]: Mounted Kernel Trace File System.
[ 6.388211] systemd[1]: modprobe@drm.service: Succeeded.
[ 6.388563] systemd[1]: Finished Load Kernel Module drm.
[ 6.414133] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.606615] systemd[1]: Started Journal Service.
[ 6.618760] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.788173] systemd-journald[251]: Received client request to flush runtime journal.
[ 6.938961] fuse: init (API version 7.32)
[ 7.446226] lp: driver loaded but no devices found
[ 7.475346] ppdev: user-space parallel port driver
[ 8.895309] audit: type=1400 audit(1663423400.034:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=289 comm="apparmor_parser"
[ 8.895323] audit: type=1400 audit(1663423400.034:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=289 comm="apparmor_parser"
[ 8.895328] audit: type=1400 audit(1663423400.034:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=289 comm="apparmor_parser"
[ 8.931924] audit: type=1400 audit(1663423400.071:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=290 comm="apparmor_parser"
[ 8.931933] audit: type=1400 audit(1663423400.071:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=290 comm="apparmor_parser"
[ 8.931937] audit: type=1400 audit(1663423400.071:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=290 comm="apparmor_parser"
[ 8.931945] audit: type=1400 audit(1663423400.071:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=290 comm="apparmor_parser"
[ 8.931949] audit: type=1400 audit(1663423400.071:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=290 comm="apparmor_parser"
[ 9.690289] audit: type=1400 audit(1663423400.829:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=293 comm="apparmor_parser"
[ 9.731241] audit: type=1400 audit(1663423400.870:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=292 comm="apparmor_parser"
[ 11.531673] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
[ 11.574226] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 11.671994] iTCO_vendor_support: vendor-support=0
[ 11.771383] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 11.771431] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 11.880318] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.880383] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0xf860)
[ 11.880508] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.966463] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 12.185817] intel_powerclamp: No package C-state available
[ 12.193095] intel_powerclamp: No package C-state available
[ 12.203532] hid: raw HID events driver (C) Jiri Kosina
[ 12.405837] mc: Linux media interface: v0.10
[ 12.563098] usbcore: registered new interface driver usbhid
[ 12.563104] usbhid: USB HID core driver
[ 12.632350] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:413C:2106.0001/input/input7
[ 12.683952] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1a.2-1/input0
[ 12.684310] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C03E.0002/input/input8
[ 12.684476] hid-generic 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-2/input0
[ 12.941662] Adding 999420k swap on /dev/sda5. Priority:-2 extents:1 across:999420k FS
[ 13.822903] usbcore: registered new interface driver snd-usb-audio
[ 16.068195] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 16.068203] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 16.068207] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 16.068211] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 16.068214] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 16.068217] snd_hda_codec_analog hdaudioC0D0: Mic=0x14
[ 16.068221] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 16.090510] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 16.092061] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 16.094320] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 16.094686] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 16.095532] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 23.055393] kauditd_printk_skb: 12 callbacks suppressed
[ 23.055396] audit: type=1400 audit(1663423414.194:24): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=675 comm="cupsd" capability=12 capname="net_admin"
[ 24.283119] audit: type=1400 audit(1663423415.422:25): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=708 comm="cups-browsed" capability=23 capname="sys_nice"
[ 25.786510] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 25.786678] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 193.328178] usb 1-3: USB disconnect, device number 4
[ 201.756056] usb 3-6: new high-speed USB device number 2 using ehci-pci
[ 201.885183] usb 3-6: New USB device found, idVendor=2357, idProduct=011f, bcdDevice= 2.00
[ 201.885192] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 201.885196] usb 3-6: Product: 802.11ac WLAN Adapter
[ 201.885199] usb 3-6: Manufacturer: Realtek
[ 201.885202] usb 3-6: SerialNumber: 00e04c000001
[ 229.391556] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 255.565443] perf: interrupt took too long (3136 > 3130), lowering kernel.perf_event_max_sample_rate to 63000
root@debian:~#