c'est pas trop l'endroit pour discuter de ça , mais voila le retour de sensors
sensors
nct6776-isa-0290
Adapter: ISA adapter
Vcore: 0.00 V (min = +0.00 V, max = +1.74 V)
in1: 184.00 mV (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.20 V (min = +2.98 V, max = +3.63 V)
+3.3V: 3.18 V (min = +2.98 V, max = +3.63 V)
in4: 768.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in5: 1.58 V (min = +0.00 V, max = +0.00 V) ALARM
in6: 736.00 mV (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.31 V (min = +2.98 V, max = +3.63 V)
Vbat: 3.26 V (min = +2.70 V, max = +3.63 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
SYSTIN: +0.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +123.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = CPU diode
AUXTIN: +39.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +38.0°C (high = +81.0°C, crit = +91.0°C)
Core 0: +28.0°C (high = +81.0°C, crit = +91.0°C)
Core 1: +37.0°C (high = +81.0°C, crit = +91.0°C)
Core 2: +32.0°C (high = +81.0°C, crit = +91.0°C)
Core 3: +27.0°C (high = +81.0°C, crit = +91.0°C)
Core 4: +29.0°C (high = +81.0°C, crit = +91.0°C)
Core 5: +31.0°C (high = +81.0°C, crit = +91.0°C)
i350bb-pci-0600
Adapter: PCI adapter
loc1: +48.0°C (high = +120.0°C, crit = +110.0°C)
nouveau-pci-8300
Adapter: PCI adapter
GPU core: 1.01 V (min = +0.60 V, max = +1.20 V)
fan1: 930 RPM
temp1: +28.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Package id 1: +35.0°C (high = +81.0°C, crit = +91.0°C)
Core 0: +29.0°C (high = +81.0°C, crit = +91.0°C)
Core 1: +30.0°C (high = +81.0°C, crit = +91.0°C)
Core 2: +35.0°C (high = +81.0°C, crit = +91.0°C)
Core 3: +30.0°C (high = +81.0°C, crit = +91.0°C)
Core 4: +32.0°C (high = +81.0°C, crit = +91.0°C)
Core 5: +32.0°C (high = +81.0°C, crit = +91.0°C)
drivetemp-scsi-1-0
Adapter: SCSI adapter
temp1: +0.0°C (low = +0.0°C, high = +100.0°C)
(crit low = +0.0°C, crit = +100.0°C)
(lowest = +0.0°C, highest = +0.0°C)
c'est "SYSTIN: " qui a disparût pour toujours
normalement j'ai 2 blocs de VRM (régulateur tension CPU)
celui la presque sur
i350bb-pci-0600
Adapter: PCI adapter
loc1: +48.0°C (high = +120.0°C, crit = +110.0°C)
le second je sais pas
ps: quand je vais dans le bios les températures sont correctes
la machine je l" éteint par le menu de Mate normalement