Debian-facile

ganix

Membre

Lieu : Saint-Malo

Distrib. : Debian 12 Bookworm

Noyau : Linux 6.1.0-13-amd64

(G)UI : Xfce 4.18.1

Inscription : 01-01-2021

[Résolu] firmware bug

Bonjour,

Mon vieux G750 JS a défuncté.
J'ai donc acquis un G751 JL nettement moins vieux et nanti d'un rétroéclairage de clavier d'un rouge lupanar du plus bel effet.
Il est muni d'une CG GEFORCE GTX 965M, de deux SSD de respectivement 128 et 500 Go ainsi que de 24 Go de ram.
Il a subi un nettoyage interne et d'un changement des pâtes thermiques.

Lors de l'installation, deux messages sont apparus:

[    0.016153] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.29460] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x00000000E) is beyond end of object (length 0xE) (20220331/exoparg2-393)
[    0.29469] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS15._PLD due to previous error (AE_AML_BUFFER_LIMIT) (20220331/psparse-529)
 

puis

Trying to enable the frame buffer...
 

L'installation s'est ensuite déroulée sans difficulté, avec connexion au WiFi automatique. J'ai juste eu à rentrer la clef.

Maintenant au démarrage j'ai les erreurs suivantes:

ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS15._PLD due to previous error (AE_AML_BUFFER_LIMIT) (20220331/psparse-529)
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x00000000E) is beyond end of object (length 0xE) (20220331/exoparg2-393)
-- Boot 7e0cc3e685a040f895bc5e7b305ead60 --
 

Cela s'affiche pendant une dizaine de secondes et le démarrage se poursuit.
Tout semble fonctionner sauf que la mise en veille, quel que soit le mode adopté, est problématique et que la sortie de veille est impossible.
En outre, ma souris, une Perimice 719-l, reconnue comme une MOSART Semi 2.4g Wireless Mouse ne devient active qu'au bout d'un délai de plusieurs minutes et "décroche" assez souvent
J'aimerai bien pouvoir à nouveau utiliser normalement la souris ainsi que la mise en veille et je me demande ce qu'implique le message sur le firmware pas à jour semble-t-il.
Si j'avais du latin, je pourrai dire que je l'ai perdu.

Merci de votre aide,
Cordialement

Edit:
Problème de souris réglé par un nettoyage des contacts.
Pour le reste, je n'ai pas, malgré mes recherches le moindre embryon de solution et donc pas de sortie de veille.
bonnes fin et début d'année @ tous.
Cordialement

Dernière modification par ganix (10-01-2024 01:05:18)

èfpé

Membre

Inscription : 10-07-2016

Re : [Résolu] firmware bug

Tout semble fonctionner sauf que la mise en veille, quel que soit le mode adopté, est problématique et que la sortie de veille est impossible.

Peux-tu préciser ce que tu entends par « problématique » ? Ces erreurs ACPI ne sont pas l'origine :

dmesg | egrep 'firmw|hibern|microc'

lspci -nnkd ::0300

glxinfo -B

cat /var/log/Xorg.0.log #sous xfce

Ces commandes renseigneront sur l'état des firmwares requis et la prise en charge de la GTX 965M.

Sous Debian 11/12, le noyau bloque l'hibernation si le Secure Boot est activé (cf. kernel_lockdown).
Le message relatif à TSC_DEADLINE a dû disparaître suite à l'installation du paquet intel-microcode.

Tu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs.

Dernière modification par èfpé (30-12-2023 18:26:42)

ganix

Membre

Lieu : Saint-Malo

Distrib. : Debian 12 Bookworm

Noyau : Linux 6.1.0-13-amd64

(G)UI : Xfce 4.18.1

Inscription : 01-01-2021

Re : [Résolu] firmware bug

Bonjour  èfpé,

Merci de ta réponse.
Après l'installation, il y avait plusieurs modes de mise en veille: mise en veille, mise en veille prolongée, mise en veille hybride.
Seul le premier mode, "mise en veille", fonctionnait, c'est-à-dire que la mise en veille se faisait, mais sans réveil possible. Les autres modes étaient inopérants.
J'ai remis les paramètres par défaut du BIOS et là, il ne reste plus qu'un seul mode "mise en veille". La machine se met bien en veille, mais c'est définitif. Elle ne se réveille pas. À l''appui sur une touche, le rétroéclairage du clavier s'allume, mais l'écran reste inanimé.

Voici les résultats des quatre commandes que tu as indiquées:

dmesg | egrep 'firmw|hibern|microc'

  0.000000] microcode: updated early: 0x1c -> 0x28, date = 2019-11-12
[    0.013779] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.013781] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.013783] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.013784] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.013786] PM: hibernation: Registered nosave memory: [mem 0x6d0e1000-0x6d0e1fff]
[    0.013788] PM: hibernation: Registered nosave memory: [mem 0x6d10e000-0x6d10efff]
[    0.013790] PM: hibernation: Registered nosave memory: [mem 0x6da02000-0x6da08fff]
[    0.013791] PM: hibernation: Registered nosave memory: [mem 0x6e262000-0x6e4effff]
[    0.013793] PM: hibernation: Registered nosave memory: [mem 0x7b3ba000-0x7b3d6fff]
[    0.013795] PM: hibernation: Registered nosave memory: [mem 0x7d8d6000-0x7dadffff]
[    0.013795] PM: hibernation: Registered nosave memory: [mem 0x7dae0000-0x7daeffff]
[    0.013796] PM: hibernation: Registered nosave memory: [mem 0x7daf0000-0x7eb13fff]
[    0.013797] PM: hibernation: Registered nosave memory: [mem 0x7eb14000-0x7effefff]
[    0.013799] PM: hibernation: Registered nosave memory: [mem 0x7f000000-0xfebfffff]dmesg | egrep 'firmw|hibern|microc'
[    0.013799] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.013800] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.013801] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.013802] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.013802] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.013803] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.013804] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.013805] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.079936] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    1.378672] microcode: Microcode Update Driver: v2.2.
[    1.481330] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
[    2.072282] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/acr/ucode_load.bin
[    2.072371] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/acr/bl.bin
[    2.072396] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/acr/ucode_unload.bin
[    2.072424] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/acr/bl.bin
[    2.072436] nouveau 0000:01:00.0: pmu: firmware unavailable
[    2.072615] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/fecs_bl.bin
[    2.072641] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/fecs_inst.bin
[    2.072726] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/fecs_data.bin
[    2.072748] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/fecs_sig.bin
[    2.072770] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/gpccs_bl.bin
[    2.072789] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/gpccs_inst.bin
[    2.072845] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/gpccs_data.bin
[    2.072867] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/gpccs_sig.bin
[    2.072887] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/sw_nonctx.bin
[    2.072911] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/sw_ctx.bin
[    2.072963] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/sw_bundle_init.bin
[    2.073019] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gm204/gr/sw_method_init.bin
[    2.313494] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x360f06)
[   13.413804] Lockdown: resume: hibernation is restricted; see man kernel_lockdown.7dmesg | egrep 'firmw|hibern|microc'
[   14.238994] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   14.239762] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   14.295319] iwlwifi 0000:3b:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[   14.302030] iwlwifi 0000:3b:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[   14.535552] iwlwifi 0000:3b:00.0: Allocated 0x00400000 bytes for firmware monitor.
[   14.632006] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   14.632241] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   16.167502] r8169 0000:3c:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[   18.293629] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   27.250688] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   27.286185] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   27.287104] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7dmesg | egrep 'firmw|hibern|microc'
 

dmesg | lspci -nnkd ::0300

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM204M [GeForce GTX 965M] [10de:13d9] (rev a1)
  Subsystem: ASUSTeK Computer Inc. GM204M [GeForce GTX 965M] [1043:171d]
  Kernel driver in use: nouveau
  Kernel modules: nouveau
 

dmesg | glxinfo -B

name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: nouveau (0x10de)
    Device: NV124 (0x13d9)
    Version: 22.3.6
    Accelerated: yes
    Video memory: 2030MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.3
    Max compat profile version: 4.3
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 1624 MB, largest block: 1624 MB
    VBO free aux. memory - total: 838860 MB, largest block: 838860 MB
    Texture free memory - total: 1624 MB, largest block: 1624 MB
    Texture free aux. memory - total: 838860 MB, largest block: 838860 MB
    Renderbuffer free memory - total: 1624 MB, largest block: 1624 MB
    Renderbuffer free aux. memory - total: 838860 MB, largest block: 838860 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 2030 MB
    Total available memory: 1050606 MB
    Currently available dedicated video memory: 1624 MB
OpenGL vendor string: nouveau
OpenGL renderer string: NV124
OpenGL core profile version string: 4.3 (Core Profile) Mesa 22.3.6
OpenGL core profile shading language version string: 4.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profilename of display: :0.0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: nouveau (0x10de)
    Device: NV124 (0x13d9)
    Version: 22.3.6
    Accelerated: yes
    Video memory: 2030MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.3
    Max compat profile version: 4.3
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 1624 MB, largest block: 1624 MB
    VBO free aux. memory - total: 838860 MB, largest block: 838860 MB
    Texture free memory - total: 1624 MB, largest block: 1624 MB
    Texture free aux. memory - total: 838860 MB, largest block: 838860 MB
    Renderbuffer free memory - total: 1624 MB, largest block: 1624 MB
    Renderbuffer free aux. memory - total: 838860 MB, largest block: 838860 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 2030 MB
    Total available memory: 1050606 MB
    Currently available dedicated video memory: 1624 MB
OpenGL vendor string: nouveau
OpenGL renderer string: NV124
OpenGL core profile version string: 4.3 (Core Profile) Mesa 22.3.6
OpenGL core profile shading language version string: 4.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profilename of display: :0.0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: nouveau (0x10de)
    Device: NV124 (0x13d9)
    Version: 22.3.6
    Accelerated: yes
    Video memory: 2030MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.3
    Max compat profile version: 4.3
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 1624 MB, largest block: 1624 MB
    VBO free aux. memory - total: 838860 MB, largest block: 838860 MB
    Texture free memory - total: 1624 MB, largest block: 1624 MB
    Texture free aux. memory - total: 838860 MB, largest block: 838860 MB
    Renderbuffer free memory - total: 1624 MB, largest block: 1624 MB
    Renderbuffer free aux. memory - total: 838860 MB, largest block: 838860 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 2030 MB
    Total available memory: 1050606 MB
    Currently available dedicated video memory: 1624 MB
OpenGL vendor string: nouveau
OpenGL renderer string: NV124
OpenGL core profile version string: 4.3 (Core Profile) Mesa 22.3.6
OpenGL core profile shading language version string: 4.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.3 (Compatibility Profile) Mesa 22.3.6
OpenGL shading language version string: 4.30
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.3.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20



OpenGL version string: 4.3 (Compatibility Profile) Mesa 22.3.6
OpenGL shading language version string: 4.30
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.3.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20



OpenGL version string: 4.3 (Compatibility Profile) Mesa 22.3.6
OpenGL shading language version string: 4.30
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.3.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
 

dmesg | cat /var/log/Xorg.0.log

[    80.154]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[    80.155] Current Operating System: Linux hartzeko 6.5.0-0.deb12.4-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.5.10-1~bpo12+1 (2023-11-23) x86_64
[    80.155] Kernel command line: BOOT_IMAGE=/vmlinuz-6.5.0-0.deb12.4-amd64 root=/dev/mapper/hartzeko--vg-root ro single
[    80.159] xorg-server 2:21.1.7-3+deb12u4 (https://www.debian.org/support)
[    80.159] Current version of pixman: 0.42.2
[    80.160]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    80.160] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    80.162] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 23 18:28:10 2023
[    80.165] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    80.166] (==) No Layout section.  Using the first Screen section.
[    80.166] (==) No screen section available. Using defaults.
[    80.166] (**) |-->Screen "Default Screen Section" (0)
[    80.166] (**) |   |-->Monitor "<default monitor>"
[    80.166] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    80.166] (==) Automatically adding devices
[    80.166] (==) Automatically enabling devices
[    80.166] (==) Automatically adding GPU devices
[    80.166] (==) Automatically binding GPU devices
[    80.166] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    80.167] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    80.167]  Entry deleted from font path.
[    80.169] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    80.169] (==) ModulePath set to "/usr/lib/xorg/modules"
[    80.169] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    80.169] (II) Loader magic: 0x5571de365f00
[    80.169] (II) Module ABI versions:
[    80.169]  X.Org ANSI C Emulation: 0.4
[    80.169]  X.Org Video Driver: 25.2
[    80.169]  X.Org XInput driver : 24.4
[    80.169]  X.Org Server Extension : 10.0
[    80.170] (++) using VT number 1

[    80.238] (EE) systemd-logind: failed to get session: PID 748 does not belong to any known session
[    80.239] (II) xfree86: Adding drm device (/dev/dri/card0)
[    80.239] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    80.241] (--) PCI:*(1@0:0:0) 10de:13d9:1043:171d rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    80.241] (II) LoadModule: "glx"
[    80.242] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    80.248] (II) Module glx: vendor="X.Org Foundation"
[    80.248]  compiled for 1.21.1.7, module version = 1.0.0
[    80.248]  ABI class: X.Org Server Extension, version 10.0
[    80.363] (==) Matched modesetting as autoconfigured driver 0
[    80.363] (==) Matched fbdev as autoconfigured driver 1
[    80.363] (==) Matched vesa as autoconfigured driver 2
[    80.363] (==) Assigned the driver to the xf86ConfigLayout
[    80.363] (II) LoadModule: "modesetting"
[    80.363] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    80.365] (II) Module modesetting: vendor="X.Org Foundation"
[    80.365]  compiled for 1.21.1.7, module version = 1.21.1
[    80.365]  Module class: X.Org Video Driver
[    80.365]  ABI class: X.Org Video Driver, version 25.2
[    80.365] (II) LoadModule: "fbdev"
[    80.365] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    80.366] (II) Module fbdev: vendor="X.Org Foundation"
[    80.366]  compiled for 1.21.1.3, module version = 0.5.0
[    80.366]  Module class: X.Org Video Driver
[    80.366]  ABI class: X.Org Video Driver, version 25.2
[    80.366] (II) LoadModule: "vesa"
[    80.366] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    80.366] (II) Module vesa: vendor="X.Org Foundation"
[    80.366]  compiled for 1.21.1.3, module version = 2.5.0
[    80.366]  Module class: X.Org Video Driver
[    80.366]  ABI class: X.Org Video Driver, version 25.2
[    80.366] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    80.366] (II) FBDEV: driver for framebuffer: fbdev
[    80.366] (II) VESA: driver for VESA chipsets: vesa
[    80.367] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[    80.367] (II) modeset(0): using drv /dev/dri/card0
[    80.367] (WW) Falling back to old probe method for fbdev
[    80.367] (II) Loading sub module "fbdevhw"
[    80.367] (II) LoadModule: "fbdevhw"
[    80.367] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    80.367] (II) Module fbdevhw: vendor="X.Org Foundation"
[    80.367]  compiled for 1.21.1.7, module version = 0.0.2
[    80.367]  ABI class: X.Org Video Driver, version 25.2
[    80.368] (II) modeset(0): Creating default Display subsection in Screen section
  "Defacat /var/log/Xorg.0.log #sous xfceult Screen Section" for depth/fbbpp 24/32
[    80.368] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    80.368] (==) modeset(0): RGB weight 888
[    80.368] (==) modeset(0): Default visual is TrueColor
[    80.368] (II) Loading sub module "glamoregl"
[    80.368] (II) LoadModule: "glamoregl"
[    80.368] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    80.376] (II) Module glamoregl: vendor="X.Org Foundation"
[    80.376]  compiled for 1.21.1.7, module version = 1.0.1
[    80.376]  ABI class: X.Org ANSI C Emulation, version 0.4
[    80.692] (II) modeset(0): glamor X acceleration enabled on NV124
[    80.692] (II) modeset(0): glamor initialized
[    80.692] (==) modeset(0): VariableRefresh: disabled
[    80.692] (==) modeset(0): AsyncFlipSecondaries: disabled
[    80.696] (II) modeset(0): Output eDP-1 has no monitor section
[    80.707] (II) modeset(0): Output VGA-1 has no monitor section
[    80.708] (II) modeset(0): Output HDMI-1 has no monitor section
[    80.772] (II) modeset(0): Output DP-1 has no monitor section
[    80.776] (II) modeset(0): EDID for output eDP-1
[    80.776] (II) modeset(0): Manufacturer: LGD  Model: 46c  Serial#: 0
[    80.776] (II) modeset(0): Year: 2014  Week: 0
[    80.776] (II) modeset(0): EDID Version: 1.4
[    80.776] (II) modeset(0): Digital Display Input
[    80.776] (II) modeset(0): 6 bits per channel
[    80.776] (II) modeset(0): Digital interface is DisplayPort
[    80.776] (II) modeset(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    80.776] (II) modeset(0): Gamma: 2.20
[    80.776] (II) modeset(0): No DPMS capabilities specified
[    80.776] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    80.776] (II) modeset(0): First detailed timing is preferred mode
[    80.776] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    80.776] (II) modeset(0): redX: 0.637 redY: 0.348   greenX: 0.334 greenY: 0.628
[    80.776] (II) modeset(0): blueX: 0.154 blueY: 0.050   whiteX: 0.313 whiteY: 0.329
[    80.776] (II) modeset(0): Manufacturer's mask: 0
[    80.776] (II) modeset(0): Supported detailed timing:
[    80.776] (II) modeset(0): clock: 138.7 MHz   Image Size:  382 x 215 mm
[    80.776] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    80.776] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    80.776] (II) modeset(0):  LG Display
[    80.776] (II) modeset(0):  LP173WF4-SPD1
[    80.776] (II) modeset(0): EDID (in hex):
[    80.776] (II) modeset(0):   00ffffffffffff0030e46c0400000000
[    80.776] (II) modeset(0):   00180104952615780a0bb5a35955a027
[    80.776] (II) modeset(0):   0c505400000001010101010101010101
[    80.776] (II) modeset(0):   0101010101012e3680a070381f403020
[    80.776] (II) modeset(0):   35007ed710000Tu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs. 01a0000000000000000
[    80.776] (II) modeset(0):   00000000000000000000000000fe004c
[    80.776] (II) modeset(0):   4720446973706c61790a2020000000fe
[    80.776] (II) modeset(0):   004c503137335746342d5350443100d0
[    80.776] (II) modeset(0): Printing probed modes for output eDP-1
[    80.776] (II) modeset(0): Modeline "1920x1080"x60.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    80.776] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    80.776] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    80.776] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    80.776] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    80.776] (II) modeset(0): Modeline "1680x1050"x60.0  146.36  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    80.776] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    80.776] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    80.776] (II) modeset(0): Modeline "1400x10Tu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs. 50"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    80.776] (II) modeset(0): Modeline "1400x1050"x60.0  121.79  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[    80.776] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    80.776] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    80.776] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    80.776] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x1024"x59.9  109.10  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[    80.776] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    80.776] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    80.776] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x960"x60.0  101.34  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.8 kHz)
[    80.776] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    80.776] (II) modeset(0): Modeline "1440x8Tu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs. 10"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    80.776] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    80.776] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    80.776] (II) modeset(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[    80.776] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    80.776] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    80.776] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    80.776] (II) modeset(0): Modeline "1024x7Tu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs. 68"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    80.776] (II) modeset(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    80.776] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    80.776] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    80.776] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    80.776] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    80.776] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    80.777] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    80.777] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    80.777] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    80.777] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    80.777] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    80.777] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    80.777] (II) modeset(0): Modeline "960xTu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs. 540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    80.777] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    80.777] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    80.777] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    80.777] (II) modeset(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    80.777] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    80.777] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    80.777] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    80.777] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    80.777] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    80.777] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    80.777] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    80.777] (II) modeset(0): Modeline "800xTu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs. 450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    80.777] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    80.777] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    80.777] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    80.777] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    80.777] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    80.777] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    80.777] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    80.777] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    80.777] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    80.777] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    80.777] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    80.777] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    80.777] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    80.777] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    80.777] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    80.777] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    80.777] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    80.777] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    80.777] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    80.777] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    80.777] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    80.777] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    80.777] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    80.777] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    80.777] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    80.777] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    80.777] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    80.777] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    80.777] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    80.787] (II) modeset(0): EDID for output VGA-1
[    80.789] (II) modeset(0): EDID for output HDMI-1
[    80.852] (II) modeset(0): EDID for output DP-1
[    80.852] (II) modeset(0): Output eDP-1 connected
[    80.852] (II) modeset(0): Output VGA-1 disconnected
[    80.852] (II) modeset(0): Output HDMI-1 disconnected
[    80.852] (II) modeset(0): Output DP-1 disconnected
[    80.852] (II) modeset(0): Using exact sizes for initial modes
[    80.852] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    80.852] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    80.852] (==) modeset(0): DPI set to (96, 96)
[    80.852] (II) Loading sub module "fb"
[    80.852] (II) LoadModule: "fb"
[    80.852] (II) Module "fb" already built-in
[    80.852] (II) UnloadModule: "fbdev"
[    80.852] (II) Unloading fbdev
[    80.852] (II) UnloadSubModule: "fbdevhw"
[    80.852] (II) Unloading fbdevhw
[    80.852] (II) UnloadModule: "vesa"
[    80.852] (II) Unloading vesa
[    80.898] (==) modeset(0): Backing store enabled
[    80.898] (==) modeset(0): Silken mouse enabled
[    80.904] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    80.904] (==) modeset(0): DPMS enabled
[    80.904] (II) modeset(0): [DRI2] Setup complete
[    80.904] (II) modeset(0): [DRI2]   DRI driver: nouveau
[    80.904] (II) modeset(0): [DRI2]   VDPAU driver: nouveau
[    80.904] (II) Initializing extension Generic Event Extension
[    80.904] (II) Initializing extension SHAPE
[    80.904] (II) Initializing extension MIT-SHM
[    80.904] (II) Initializing extension XInputExtension
[    80.905] (II) Initializing extension XTEST
[    80.905] (II) Initializing extension BIG-REQUESTS
[    80.905] (II) Initializing extension SYNC
[    80.905] (II) Initializing extension XKEYBOARD
[    80.905] (II) Initializing extension XC-MISC
[    80.905] (II) Initializing extension SECURITY
[    80.905] (II) Initializing extension XFIXES
[    80.905] (II) Initializing extension RENDER
[    80.905] (II) Initializing extension RANDR
[    80.906] (II) Initializing extension COMPOSITE
[    80.906] (II) Initializing extension DAMAGE
[    80.906] (II) Initializing extension MIT-SCREEN-SAVER
[    80.906] (II) Initializing extension DOUBLE-BUFFER
[    80.906] (II) Initializing extension RECORD
[    80.906] (II) Initializing extension DPMS
[    80.906] (II) Initializing extension Present
[    80.906] (II) Initializing extension DRI3
[    80.906] (II) Initializing extension X-Resource
[    80.906] (II) Initializing extension XVideo
[    80.906] (II) Initializing extension XVideo-MotionCompensation
[    80.906] (II) Initializing extension SELinux
[    80.906] (II) SELinux: Disabled on system
[    80.906] (II) Initializing extension GLX
[    80.910] (II) AIGLX: Loaded and initialized nouveau
[    80.910] (II) GLX: Initialized DRI2 GL provider for screen 0
[    80.910] (II) Initializing extension XFree86-VidModeExtension
[    80.910] (II) Initializing extension XFree86-DGA
[    80.910] (II) Initializing extension XFree86-DRI
[    80.910] (II) Initializing extension DRI2
[    80.910] (II) modeset(0): Damage tracking initialized
[    80.910] (II) modeset(0): Setting screen physical size to 508 x 285
[    80.965] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    80.965] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    80.965] (II) LoadModule: "libinput"
[    80.966] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    80.969] (II) Module libinput: vendor="X.Org Foundation"
[    80.969]  compiled for 1.21.1.3, module version = 1.2.1
[    80.969]  Module class: X.Org XInput Driver
[    80.969]  ABI class: X.Org XInput driver, version 24.4
[    80.969] (II) Using input driver 'libinput' for 'Power Button'
[    80.969] (**) Power Button: always reports core events
[    80.969] (**) Option "Device" "/dev/input/event4"
[    80.975] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    80.975] (II) event4  - Power Button: device is a keyboard
[    80.975] (II) event4  - Power Button: device removed
[    80.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[    80.996] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    80.996] (**) Option "xkb_model" "pc105"
[    80.996] (**) Option "xkb_layout" "fr"
[    80.996] (**) Option "xkb_variant" "latin9"
[    81.011] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    81.011] (II) event4  - Power Button: device is a keyboard
[    81.012] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event14)
[    81.012] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    81.012] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    81.012] (**) Asus Wireless Radio Control: always reports core events
[    81.012] (**) Option "Device" "/dev/input/event14"
[    81.012] (II) event14 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[    81.012] (II) event14 - Asus Wireless Radio Control: device is a keyboard
[    81.012] (II) event14 - Asus Wireless Radio Control: device removed
[    81.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input22/event14"
[    81.060] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    81.060] (**) Option "xkb_model" "pc105"
[    81.060] (**) Option "xkb_layout" "fr"
[    81.060] (**) Option "xkb_variant" "latin9"
[    81.061] (II) event14 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[    81.061] (II) event14 - Asus Wireless Radio Control: device is a keyboard
[    81.061] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    81.061] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    81.061] (II) Using input driver 'libinput' for 'Video Bus'
[    81.061] (**) Video Bus: always reports core events
[    81.061] (**) Option "Device" "/dev/input/event3"
[    81.062] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    81.062] (II) event3  - Video Bus: device is a keyboard
[    81.062] (II) event3  - Video Bus: device removed
[    81.092] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:5f/LNXVIDEO:00/input/input7/event3"
[    81.092] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    81.092] (**) Option "xkb_model" "pc105"
[    81.092] (**) Option "xkb_layout" "fr"
[    81.092] (**) Option "xkb_variant" "latin9"
[    81.093] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    81.093] (II) event3  - Video Bus: device is a keyboard
[    81.094] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    81.094] (II) No input driver specified, ignoring this device.
[    81.094] (II) This device may have been added with another device file.
[    81.094] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    81.094] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    81.094] (II) Using input driver 'libinput' for 'Sleep Button'
[    81.094] (**) Sleep Button: always reports core events
[    81.094] (**) Option "Device" "/dev/input/event2"
[    81.094] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    81.094] (II) event2  - Sleep Button: device is a keyboard
[    81.095] (II) event2  - Sleep Button: device removed
[    81.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[    81.108] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    81.108] (**) Option "xkb_model" "pc105"
[    81.108] (**) Option "xkb_layout" "fr"
[    81.108] (**) Option "xkb_variant" "latin9"
[    81.109] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    81.109] (II) event2  - Sleep Button: device is a keyboard
[    81.109] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[    81.109] (II) No input driver specified, ignoring this device.
[    81.109] (II) This device may have been added with another device file.
[    81.110] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[    81.110] (II) No input driver specified, ignoring this device.
[    81.110] (II) This device may have been added with another device file.
[    81.110] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[    81.110] (II) No input driver specified, ignoring this device.
[    81.110] (II) This device may have been added with another device file.
[    81.110] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event20)
[    81.110] (II) No input driver specified, ignoring this device.
[    81.110] (II) This device may have been added with another device file.
[    81.111] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event6)
[    81.111] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[    81.111] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'
[    81.111] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[    81.111] (**) Option "Device" "/dev/input/event6"
[    81.112] (II) event6  - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[    81.112] (II) event6  - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[    81.112] (II) event6  - MOSART Semi. 2.4G Wireless Mouse: device removed
[    81.148] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:062A:4102.0001/input/input13/event6"
[    81.148] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 10)
[    81.148] (**) Option "AccelerationScheme" "none"
[    81.148] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0
[    81.148] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[    81.148] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[    81.149] (II) event6  - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[    81.149] (II) event6  - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[    81.150] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse1)
[    81.150] (II) No input driver specified, ignoring this device.
[    81.150] (II) This device may have been added with another device file.
[    81.151] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse Consumer Control (/dev/input/event7)
[    81.151] (**) MOSART Semi. 2.4G Wireless Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    81.151] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse Consumer Control'
[    81.151] (**) MOSART Semi. 2.4G Wireless Mouse Consumer Control: always reports core events
[    81.151] (**) Option "Device" "/dev/input/event7"
[    81.152] (II) event7  - MOSART Semi. 2.4G Wireless Mouse Consumer Control: is tagged by udev as: Keyboard
[    81.152] (II) event7  - MOSART Semi. 2.4G Wireless Mouse Consumer Control: device is a keyboard
[    81.152] (II) event7  - MOSART Semi. 2.4G Wireless Mouse Consumer Control: device removed
[    81.172] (II) libinput: MOSART Semi. 2.4G Wireless Mouse Consumer Control: needs a virtual subdevice
[    81.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:062A:4102.0001/input/input14/event7"
[    81.172] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse Consumer Control" (type: MOUSE, id 11)
[    81.172] (**) Option "AccelerationScheme" "none"
[    81.172] (**) MOSART Semi. 2.4G Wireless Mouse Consumer Control: (accel) selected scheme none/0
[    81.172] (**) MOSART Semi. 2.4G Wireless Mouse Consumer Control: (accel) acceleration factor: 2.000
[    81.172] (**) MOSART Semi. 2.4G Wireless Mouse Consumer Control: (accel) acceleration threshold: 4
[    81.173] (II) event7  - MOSART Semi. 2.4G Wireless Mouse Consumer Control: is tagged by udev as: Keyboard
[    81.173] (II) event7  - MOSART Semi. 2.4G Wireless Mouse Consumer Control: device is a keyboard
[    81.174] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event8)
[    81.174] (II) No input driver specified, ignoring this device.
[    81.174] (II) This device may have been added with another device file.
[    81.174] (II) config/udev: Adding input device ASUS ASUS ROG Macrokey (/dev/input/event9)
[    81.174] (**) ASUS ASUS ROG Macrokey: Applying InputClass "libinput keyboard catchall"
[    81.174] (II) Using input driver 'libinput' for 'ASUS ASUS ROG Macrokey'
[    81.174] (**) ASUS ASUS ROG Macrokey: always reports core events
[    81.174] (**) Option "Device" "/dev/input/event9"
[    81.175] (II) event9  - ASUS ASUS ROG Macrokey: is tagged by udev as: Keyboard
[    81.175] (II) event9  - ASUS ASUS ROG Macrokey: device is a keyboard
[    81.176] (II) event9  - ASUS ASUS ROG Macrokey: device removed
[    81.196] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0B05:17FD.0002/input/input16/event9"
[    81.196] (II) XINPUT: Adding extended input device "ASUS ASUS ROG Macrokey" (type: KEYBOARD, id 12)
[    81.196] (**) Option "xkb_model" "pc105"
[    81.196] (**) Option "xkb_layout" "fr"
[    81.196] (**) Option "xkb_variant" "latin9"
[    81.197] (II) event9  - ASUS ASUS ROG Macrokey: is tagged by udev as: Keyboard
[    81.197] (II) event9  - ASUS ASUS ROG Macrokey: device is a keyboard
[    81.198] (II) config/udev: Adding input device ASUS ASUS ROG Macrokey Mouse (/dev/input/event10)
[    81.198] (**) ASUS ASUS ROG Macrokey Mouse: Applying InputClass "libinput pointer catchall"
[    81.198] (II) Using input driver 'libinput' for 'ASUS ASUS ROG Macrokey Mouse'
[    81.198] (**) ASUS ASUS ROG Macrokey Mouse: always reports core events
[    81.198] (**) Option "Device" "/dev/input/event10"
[    81.199] (II) event10 - ASUS ASUS ROG Macrokey Mouse: is tagged by udev as: Mouse
[    81.199] (II) event10 - ASUS ASUS ROG Macrokey Mouse: device is a pointer
[    81.199] (II) event10 - ASUS ASUS ROG Macrokey Mouse: device removed
[    81.228] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:17FD.0003/input/input17/event10"
[    81.228] (II) XINPUT: Adding extended input device "ASUS ASUS ROG Macrokey Mouse" (type: MOUSE, id 13)
[    81.228] (**) Option "AccelerationScheme" "none"
[    81.228] (**) ASUS ASUS ROG Macrokey Mouse: (accel) selected scheme none/0
[    81.228] (**) ASUS ASUS ROG Macrokey Mouse: (accel) acceleration factor: 2.000
[    81.228] (**) ASUS ASUS ROG Macrokey Mouse: (accel) acceleration threshold: 4
[    81.229] (II) event10 - ASUS ASUS ROG Macrokey Mouse: is tagged by udev as: Mouse
[    81.229] (II) event10 - ASUS ASUS ROG Macrokey Mouse: device is a pointer
[    81.230] (II) config/udev: Adding input device ASUS ASUS ROG Macrokey Mouse (/dev/input/mouse2)
[    81.230] (II) No input driver specified, ignoring this device.
[    81.230] (II) This device may have been added with another device file.
[    81.231] (II) config/udev: Adding input device ASUS ASUS ROG Macrokey System Control (/dev/input/event11)
[    81.231] (**) ASUS ASUS ROG Macrokey System Control: Applying InputClass "libinput keyboard catchall"
[    81.231] (II) Using input driver 'libinput' for 'ASUS ASUS ROG Macrokey System Control'
[    81.231] (**) ASUS ASUS ROG Macrokey System Control: always reports core events
[    81.231] (**) Option "Device" "/dev/input/event11"
[    81.231] (II) event11 - ASUS ASUS ROG Macrokey System Control: is tagged by udev as: Keyboard
[    81.232] (II) event11 - ASUS ASUS ROG Macrokey System Control: device is a keyboard
[    81.232] (II) event11 - ASUS ASUS ROG Macrokey System Control: device removed
[    81.260] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:17FD.0003/input/input18/event11"
[    81.260] (II) XINPUT: Adding extended input device "ASUS ASUS ROG Macrokey System Control" (type: KEYBOARD, id 14)
[    81.260] (**) Option "xkb_model" "pc105"
[    81.260] (**) Option "xkb_layout" "fr"
[    81.260] (**) Option "xkb_variant" "latin9"
[    81.261] (II) event11 - ASUS ASUS ROG Macrokey System Control: is tagged by udev as: Keyboard
[    81.261] (II) event11 - ASUS ASUS ROG Macrokey System Control: device is a keyboard
[    81.262] (II) config/udev: Adding input device ASUS ASUS ROG Macrokey Consumer Control (/dev/input/event12)
[    81.262] (**) ASUS ASUS ROG Macrokey Consumer Control: Applying InputClass "libinput keyboard catchall"
[    81.262] (II) Using input driver 'libinput' for 'ASUS ASUS ROG Macrokey Consumer Control'
[    81.262] (**) ASUS ASUS ROG Macrokey Consumer Control: always reports core events
[    81.262] (**) Option "Device" "/dev/input/event12"
[    81.263] (II) event12 - ASUS ASUS ROG Macrokey Consumer Control: is tagged by udev as: Keyboard
[    81.263] (II) event12 - ASUS ASUS ROG Macrokey Consumer Control: device is a keyboard
[    81.263] (II) event12 - ASUS ASUS ROG Macrokey Consumer Control: device removed
[    81.276] (II) libinput: ASUS ASUS ROG Macrokey Consumer Control: needs a virtual subdevice
[    81.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:17FD.0003/input/input19/event12"
[    81.276] (II) XINPUT: Adding extended input device "ASUS ASUS ROG Macrokey Consumer Control" (type: MOUSE, id 15)
[    81.276] (**) Option "AccelerationScheme" "none"
[    81.276] (**) ASUS ASUS ROG Macrokey Consumer Control: (accel) selected scheme none/0
[    81.276] (**) ASUS ASUS ROG Macrokey Consumer Control: (accel) acceleration factor: 2.000
[    81.276] (**) ASUS ASUS ROG Macrokey Consumer Control: (accel) acceleration threshold: 4
[    81.277] (II) event12 - ASUS ASUS ROG Macrokey Consumer Control: is tagged by udev as: Keyboard
[    81.277] (II) event12 - ASUS ASUS ROG Macrokey Consumer Control: device is a keyboard
[    81.278] (II) config/udev: Adding input device ASUS ASUS ROG Macrokey Keyboard (/dev/input/event13)
[    81.278] (**) ASUS ASUS ROG Macrokey Keyboard: Applying InputClass "libinput keyboard catchall"
[    81.278] (II) Using input driver 'libinput' for 'ASUS ASUS ROG Macrokey Keyboard'
[    81.278] (**) ASUS ASUS ROG Macrokey Keyboard: always reports core events
[    81.278] (**) Option "Device" "/dev/input/event13"
[    81.279] (II) event13 - ASUS ASUS ROG Macrokey Keyboard: is tagged by udev as: Keyboard
[    81.279] (II) event13 - ASUS ASUS ROG Macrokey Keyboard: device is a keyboard
[    81.279] (II) event13 - ASUS ASUS ROG Macrokey Keyboard: device removed
[    81.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:17FD.0003/input/input21/event13"
[    81.292] (II) XINPUT: Adding extended input device "ASUS ASUS ROG Macrokey Keyboard" (type: KEYBOARD, id 16)
[    81.292] (**) Option "xkb_model" "pc105"
[    81.292] (**) Option "xkb_layout" "fr"
[    81.292] (**) Option "xkb_variant" "latin9"
[    81.293] (II) event13 - ASUS ASUS ROG Macrokey Keyboard: is tagged by udev as: Keyboard
[    81.293] (II) event13 - ASUS ASUS ROG Macrokey Keyboard: device is a keyboard
[    81.294] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event21)
[    81.294] (II) No input driver specified, ignoring this device.
[    81.294] (II) This device may have been added with another device file.
[    81.294] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event22)
[    81.294] (II) No input driver specified, ignoring this device.
[    81.294] (II) This device may have been added with another device file.
[    81.294] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event16)
[    81.294] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    81.294] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    81.294] (**) Asus WMI hotkeys: always reports core events
[    81.294] (**) Option "Device" "/dev/input/event16"
[    81.295] (II) event16 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[    81.295] (II) event16 - Asus WMI hotkeys: device is a keyboard
[    81.295] (II) event16 - Asus WMI hotkeys: device removed
[    81.324] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input24/event16"
[    81.324] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 17)
[    81.324] (**) Option "xkb_model" "pc105"
[    81.324] (**) Option "xkb_layout" "fr"
[    81.324] (**) Option "xkb_variant" "latin9"
[    81.325] (II) event16 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[    81.325] (II) event16 - Asus WMI hotkeys: device is a keyboard
[    81.325] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    81.325] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    81.325] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    81.325] (**) AT Translated Set 2 keyboard: always reports core events
[    81.325] (**) Option "Device" "/dev/input/event0"
[    81.326] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    81.326] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    81.327] (II) event0  - AT Translated Set 2 keyboard: device removed
[    81.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    81.340] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[    81.340] (**) Option "xkb_model" "pc105"
[    81.340] (**) Option "xkb_layout" "fr"
[    81.340] (**) Option "xkb_variant" "latin9"
[    81.341] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    81.341] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    81.342] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5)
[    81.342] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[    81.342] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[    81.342] (**) ETPS/2 Elantech Touchpad: always reports core events
[    81.342] (**) Option "Device" "/dev/input/event5"
[    81.343] (II) event5  - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[    81.344] (II) event5  - ETPS/2 Elantech Touchpad: device is a touchpad
[    81.344] (II) event5  - ETPS/2 Elantech Touchpad: device removed
[    81.380] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event5"
[    81.380] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 19)
[    81.381] (**) Option "AccelerationScheme" "none"
[    81.381] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[    81.381] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    81.381] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    81.381] (II) event5  - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[    81.382] (II) event5  - ETPS/2 Elantech Touchpad: device is a touchpad
[    81.383] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    81.383] (II) No input driver specified, ignoring this device.
[    81.383] (II) This device may have been added with another device file.
[    81.383] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[    81.383] (II) No input driver specified, ignoring this device.
[    81.383] (II) This device may have been added with another device file.
[    81.387] (**) MOSART Semi. 2.4G Wireless Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    81.387] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse Consumer Control'
[    81.387] (**) MOSART Semi. 2.4G Wireless Mouse Consumer Control: always reports core events
[    81.387] (**) Option "Device" "/dev/input/event7"
[    81.387] (II) libinput: MOSART Semi. 2.4G Wireless Mouse Consumer Control: is a virtual subdevice
[    81.387] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:062A:4102.0001/input/input14/event7"
[    81.387] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse Consumer Control" (type: KEYBOARD, id 20)
[    81.387] (**) Option "xkb_model" "pc105"
[    81.387] (**) Option "xkb_layout" "fr"
[    81.387] (**) Option "xkb_variant" "latin9"
[    81.387] (**) ASUS ASUS ROG Macrokey Consumer Control: Applying InputClass "libinput keyboard catchall"
[    81.387] (II) Using input driver 'libinput' for 'ASUS ASUS ROG Macrokey Consumer Control'
[    81.387] (**) ASUS ASUS ROG Macrokey Consumer Control: always reports core events
[    81.387] (**) Option "Device" "/dev/input/event12"
[    81.387] (II) libinput: ASUS ASUS ROG Macrokey Consumer Control: is a virtual subdevice
[    81.387] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:17FD.0003/input/input19/event12"
[    81.387] (II) XINPUT: Adding extended input device "ASUS ASUS ROG Macrokey Consumer Control" (type: KEYBOARD, id 21)
[    81.387] (**) Option "xkb_model" "pc105"
[    81.387] (**) Option "xkb_layout" "fr"
[    81.387] (**) Option "xkb_variant" "latin9"
[    81.954] (II) modeset(0): Disabling kernel dirty updates, not required.
[    97.849] (II) event4  - Power Button: device removed
[    97.928] (II) event14 - Asus Wireless Radio Control: device removed
[    98.008] (II) event3  - Video Bus: device removed
[    98.076] (II) event2  - Sleep Button: device removed
[    98.120] (II) event6  - MOSART Semi. 2.4G Wireless Mouse: device removed
[    98.172] (II) event9  - ASUS ASUS ROG Macrokey: device removed
[    98.228] (II) event10 - ASUS ASUS ROG Macrokey Mouse: device removed
[    98.280] (II) event11 - ASUS ASUS ROG Macrokey System Control: device removed
[    98.320] (II) event13 - ASUS ASUS ROG Macrokey Keyboard: device removed
[    98.352] (II) event16 - Asus WMI hotkeys: device removed
[    98.392] (II) event0  - AT Translated Set 2 keyboard: device removed
[    98.424] (II) event5  - ETPS/2 Elantech Touchpad: device removed
[    98.456] (II) event7  - MOSART Semi. 2.4G Wireless Mouse Consumer Control: device removed
[    98.488] (II) event12 - ASUS ASUS ROG Macrokey Consumer Control: device removed
[    98.520] (II) UnloadModule: "libinput"
[    98.520] (II) UnloadModule: "libinput"
[    98.520] (II) UnloadModule: "libinput"
[    98.520] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.521] (II) UnloadModule: "libinput"
[    98.532] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[    98.532] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[    98.532] (WW) xf86OpenConsole: VT_GETSTATE failed: Input/output error
[    98.532] (II) Server terminated successfully (0). Closing log file.
 

dmesg | Tu as ouvert une discussion similaire sur debian-fr.org. Merci de signaler si tu as crossposté ailleurs.

Je n'ai pas crossposté ailleurs. En fait, comme Kankan de l'atelier ASUS qui a réglé mes problèmes de machine avait ouvert une discussion à propos de cet ordi sur ce forum, j'ai par réflexe poursuivi les recherches sur ce forum. Je me rends compte à ta question de ce que cela peut ressembler à une futile manifestation d'impatience et j'en suis désolé.
Cordialement

èfpé

Membre

Inscription : 10-07-2016

Re : [Résolu] firmware bug

J'ai remis les paramètres par défaut du BIOS et là, il ne reste plus qu'un seul mode "Mise en veille".

En pratique tu as réactivé le Secure Boot. Cf. « Lockdown: resume: hibernation is restricted; [...] ».

La machine se met bien en veille, mais c'est définitif. Elle ne se réveille pas. À l'appui sur une touche, le rétroéclairage du clavier s'allume, mais l'écran reste inanimé.

Ce que tu décris évoque un problème de pilote graphique, la GTX 965M est prise en charge hormis :

[    2.072436] nouveau 0000:01:00.0: pmu: firmware unavailable

Je ne sais pas si le problème vient de l'absence du firmware PMU (Power Management Unit?) ou non.
Par contre il semble que ce problème peut être résolu par l'installation du pilote propriétaire NVIDIA.

apt install nvidia-driver

Les sections contrib et non-free des dépôts sont à renseigner dans ton fichier /etc/apt/sources.list.

Je me rends compte à ta question de ce que cela peut ressembler à une futile manifestation d'impatience et j'en suis désolé.

Non pas d'inquiétude à ce sujet, avoir l'information permet de savoir ce qui a déjà été tenté ou non.

ganix

Membre

Lieu : Saint-Malo

Distrib. : Debian 12 Bookworm

Noyau : Linux 6.1.0-13-amd64

(G)UI : Xfce 4.18.1

Inscription : 01-01-2021

Re : [Résolu] firmware bug

Bonjour èfpé merci de tes réponses.

En pratique tu as réactivé le Secure Boot. Cf. « Lockdown: resume: hibernation is restricted; [...] ».

J'ai mis secure boot en "disabled"
Les options de mise en veille sont revenues.
En fermant le couvercle rien ne marche.
Avec le menu session, la mise en veille prolongée et le réveil fonctionnent en mode prolongé et en mode hybride. Pour le réveil seule une pression sur le bouton on/off le permet. Le mode mise en veille sans option ne veut rien savoir.
Dans les logs, on voit que l'hibernation n'est plus "restricted".

Je ne sais pas si le problème vient de l'absence du firmware PMU (Power Management Unit) ou non.
Par contre il semble que ce problème peut être résolu par l'installation du pilote propriétaire NVIDIA.

Si j'ai bien lu, dans la version de firmware-misc-nonfree 20230625-2 disponible sur Trixie devrait améliorer les choses puisque PMU semble y être présent.
En attendant je vais installer le pilote propriétaire NVIDIA et je fais retour de cela.

Une fois le pilote NVIDIA installé, les modes de veille semblent être fonctionnels à la fermeture du couvercle du portable, mais le mode hybride a disparu dans les choix proposés par le gestionnaire de paramètres et il n’apparaît pas quand je clique sur le bouton du menu de session, pas plus d'ailleurs que le mode veille prolongée.

Ne reste plus maintenant que le message ACPI ERROR. En dépit de mes recherches, je n'ai pas trouvé de solution à ce problème.

Merci pour ce saut quantique dans la fonctionnalité.

Dernière modification par ganix (06-01-2024 00:49:44)

èfpé

Membre

Inscription : 10-07-2016

Re : [Résolu] firmware bug

J'ai mis secure boot en "disabled".

Note que tu t'es ainsi épargné un écran noir au redémarrage ; j'avais oublié de mentionner ce point.
DKMS signe les modules compilés, sous Debian 12. Activer le Secure Boot est désormais accessible.

Si j'ai bien lu, la version de firmware-misc-nonfree 20230625-2 disponible sur Trixie devrait améliorer les choses puisque PMU semble y être présent.

Il s'agit des firmwares pour les GPU GM20B et GP10B, à priori les GM204(M) ne sont pas concernés.
Ces mêmes firmwares sont déjà présents dans le paquet pour Bookworm (version 10 février 2023).

Une fois le pilote NVIDIA installé, les modes de veille semblent être fonctionnels à la fermeture du couvercle du portable, mais le mode hybride a disparu des choix proposés par le gestionnaire de paramètres [...].

Faut-il comprendre que la veille prolongée l'hibernation fonctionne correctement, couvercle rabattu ?

Ne reste plus maintenant que le message ACPI Error.

L'erreur initiale est « ACPI BIOS Error (bug) », le noyau râle contre le BIOS, d'ailleurs que retourne :

dmesg | grep DMI:

[    0.000000] DMI: ASUSTeK COMPUTER INC. G751JL/G751JL, BIOS G751JL.205 11/02/2015

La version 205 est la dernière publiée par le constructeur ; il n'y a donc rien à espérer de ce côté-là.

Dernière modification par èfpé (06-01-2024 19:36:42)

ganix

Membre

Lieu : Saint-Malo

Distrib. : Debian 12 Bookworm

Noyau : Linux 6.1.0-13-amd64

(G)UI : Xfce 4.18.1

Inscription : 01-01-2021

Re : [Résolu] firmware bug

DKMS signe les modules compilés, sous Debian 12. Activer le Secure Boot est désormais accessible.

J'ai lu la doc et je pense avoir compris, encore que Faulkner dans le texte me paraisse plus accessible.

Il s'agit des firmwares pour les GPU GM20B et GP10B, à priori les GM204(M) ne sont pas concernés.

Désolé, j'ai lu un peu vite et pris mes fantasmes pour des réalités...

Faut-il comprendre que la veille prolongée l'hibernation fonctionne correctement, couvercle rabattu ?

Je viens de re-tester, l'hibernation - veille prolongée semble-t-il sous XFCE. Elle ne fonctionne pas correctement couvercle rabattu, la machine ne se met pas en veille. Seule l''option "veille" fonctionne, permettant de récupérer la session en cours au moment de la mise en veille.
À partir du "bouton d'action" là ça fonctionne. Je n'ai accès aux différents modes de veille qu'à la condition que toutes les fenêtres soient closes et qu'aucune tâche ne soi en cours. Sinon, seule l'option "veille" est proposée, elle est fonctionnelle avec  sortie de veille par une pression dur le bouton on/off de la machine et récupération de la session.

L'erreur initiale est « ACPI BIOS Error (bug) », le noyau râle contre le BIOS, d'ailleurs que retourne :

dmesg | grep DMI:

[    0.000000] DMI: ASUSTeK COMPUTER INC. G751JL/G751JL, BIOS G751JL.202 01/20/2015

La version 205 est la dernière publiée par le constructeur ; il n'y a donc rien à espérer de ce côté-là.

BIOS 205
Version 205
2.27 MB
2015/12/31

Fix system hanging issue (code 0x72)

Pas d'indication sur ce que peut signifier "hanging issue".
Je ne sais pas si je dois flasher le BIOS et comme je n'ai pas de batterie, ce n'est guère prudent en l'état. Cependant, s'il y a quelque bénéfice à tirer de l'opération je suis prêt à investir massivement et à faire l'opération.

Merci encore èfpé, j'ai le sentiment que je pourrais, à la clôture de ce fil, m'approcher du niveau "Debian pour les nuls".

èfpé

Membre

Inscription : 10-07-2016

Re : [Résolu] firmware bug

Elle [l'hibernation] ne fonctionne pas correctement couvercle rabattu, la machine ne se met pas en veille. Seule l''option "veille" fonctionne, permettant de récupérer la session en cours au moment de la mise en veille.

Briquer le BIOS est tout sauf urgent. Tu peux par contre installer sans délai le paquet acpi-support.

À partir du "bouton d'action" là ça fonctionne. Je n'ai accès aux différents modes de veille qu'à la condition que toutes les fenêtres soient closes et qu'aucune tâche ne soit en cours.

Le ganix dans le texte peut être moins accessible que le man de la commande... tar ; que retourne :

cat /proc/swaps

Une partition d'échange sous-dimensionnée pourrait expliquer ces caprices d'entrée en hibernation.

ganix

Membre

Lieu : Saint-Malo

Distrib. : Debian 12 Bookworm

Noyau : Linux 6.1.0-13-amd64

(G)UI : Xfce 4.18.1

Inscription : 01-01-2021

Re : [Résolu] firmware bug

Le ganix dans le texte peut être moins accessible que le man de la commande...

Et encore, je n'écris pas dans ma langue maternelle...

Briquer le BIOS est tout sauf urgent. Tu peux par contre installer sans délai le paquet acpi-support.

Tant mieux, je n'achèterai pas de batterie. Paquet acpi-support installé. Le démarrage et la sortie de veille sont beaucoup plus rapides.

que retourne :

cat /proc/swaps

Filename        Type      Size    Used    Priority
/dev/dm-2       partition 999420  0       -2

Dans les diverses sources que j'ai consultées, les avis divergent sur les règles de dimensionnement de la partition swap et sur la pertinence de son installation sur un SSD censément limité en écriture.

èfpé

Membre

Inscription : 10-07-2016

Re : [Résolu] firmware bug

Dans les diverses sources que j'ai consultées, les avis divergent sur les règles de dimensionnement de la partition swap et sur la pertinence de son installation sur un SSD censément limité en écriture.

Pas sûr que cet argument soit utilisé à bon escient... la question est : veux-tu utiliser l'hibernation ?
L'hibernation consistant à écrire le contenu de la RAM sur la swap, 976 Mio me semble un peu juste.

ganix

Membre

Lieu : Saint-Malo

Distrib. : Debian 12 Bookworm

Noyau : Linux 6.1.0-13-amd64

(G)UI : Xfce 4.18.1

Inscription : 01-01-2021

Re : [Résolu] firmware bug

Pas sûr que cet argument soit utilisé à bon escient... la question est : veux-tu utiliser l'hibernation ?
L'hibernation consistant à écrire le contenu de la RAM sur la swap, 976 Mio me semble un peu juste.

D'accord là-dessus.
Quand je regarde le taux d'occupation de la RAM au moment d'abandonner le clavier, cela oscille entre 15 et 20%, soit ≅ 4 Go  pour l'utilisation courante. Pour les taches plus lourdes, graphisme ou modélisation par exemple, je sauvegarde toujours le travail et je ferme les applis correspondantes avant de clore une session. Je vais faire une petite stat pendant quelques temps et je verrai ce que cela donne comme valeur moyenne.
Il y a une part de provocation de ma part dans la restitution du commentaire sur la swap, commentaire que j'ai lu dans "optimisation de la swap" sur le wiki DF.
Je passe le sujet en résolu.
Merci èfpé pour ton aide et pour m'avoir redonné l'envie d'aller fouiller dans les logs et dans la doc.
Je clos le post sur debian-fr.org en faisant un résumé succinct des choses et en chantant tes louanges.