Pb souris sans fil logitech

vanvan · 14-06-2024 08:55:39

Bonjour,
je viens d'installer Bookworm sur une machine où tournait auparavant buster. J'ai depuis un souci avec ma souris sans fil qui "freeze" quelques dixièmes de secondes assez régulièrement, le fréquence et la durée des "freeze" à priori proportionnellement à ce qui tourne sur le pc.

J'ai le problème avec 2 souris différentes (même modèle), je ne l'ai pas avec une souris filaire (et je ne l'avais pas sous buster).
J'ai installé xfce en plus de gnome, j'ai toujours le problème.

Dans sources.list j'ai :

deb http://miroir.univ-lorraine.fr/debian/ bookworm main non-free-firmware
deb-src http://miroir.univ-lorraine.fr/debian/ bookworm main non-free-firmware

deb http://security.debian.org/debian-security bookworm-security main non-free-firmware
deb-src http://security.debian.org/debian-security bookworm-security main non-free-firmware

# bookworm-updates, to get updates before a point release is made;
# see https://www.debian.org/doc/manuals/debi … _backports
deb http://miroir.univ-lorraine.fr/debian/ bookworm-updates main non-free-firmware
deb-src http://miroir.univ-lorraine.fr/debian/ bookworm-updates main non-free-firmware

Avez-vous une idée d'où je dois chercher ?

Merci

debian-noel · 14-06-2024 09:31:34

Bonjour
je vois que tu n'a pas l'option "contrib" et "non-free" sur ton sources.list ?
tu n'en a pas besoin ?
pour les erreurs du système

journalctl -b -r -p err

 

sous xfce tu a le log de X avec des infos sur ta souris

cat /var/log/Xorg.0.log

 

pour ton matériel "lspci"

lspci

 

et du #4

lsusb

 

ps: il semble que ta machine manque de ressources lors du freeze

Dernière modification par debian-noel (14-06-2024 10:26:22)

vanvan · 14-06-2024 09:41:33

debian-noel a écrit :

Bonjour
je vois que tu n'a pas l'option "contrib" et "non-free" sur ton sources.list ?
tu n'en a pas besoin ?

J'avais cru comprendre que depuis bullseye ou bookworm, firmware-non-free remplaçait contrib et non-free. Me serais-je trompé ?

--gilles-- · 14-06-2024 09:45:58

Plutôt pour une souris USB :

lsusb

Personnellement, un pote m'avait donné une souris sans fil depuis Debian 7 Wheezy, elle avait des "retards à l'allumage", je cherchais sans rien trouver, je patientais et puis un jour je suis retourné avec une souris avec fil. Ouf ! Quel bonheur, une souris qui répond au quart de tour ! Depuis il ne me viendrait plus à l'idée d'utiliser une souris sans fil !

***************************

Au complet c'est : main contrib non-free non-free-firmware

Dernière modification par --gilles-- (14-06-2024 09:48:36)

debian-noel · 14-06-2024 10:15:21

je sais pas mais moi sous bookworm mon sources.list

#debian12 bookworm

deb https://deb.debian.org/debian/ bookworm main contrib non-free-firmware non-free

deb https://security.debian.org/debian-security bookworm-security main contrib non-free-firmware non-free

deb https://deb.debian.org/debian/ bookworm-updates main contrib non-free-firmware non-free

avec ceci pas d'erreur , donc le dépôt "contrib" et "non-free" existe

apt update

 

ps: src (fichier sources ) pas besoin pour mon utilisation
un exemple pour ma souris en filaire sous X (sous Trixie bureau Mate ).

This device may have been added with another device file.

[     8.609] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event1)

[     8.609] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"

[     8.609] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'

[     8.609] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events

[     8.609] (**) Option "Device" "/dev/input/event1"

[     8.672] (II) event1  - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse

[     8.673] (II) event1  - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer

[     8.674] (II) event1  - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed

[     8.708] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.

[     8.708] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.

[     8.708] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.

[     8.708] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:045E:0040.0001/input/input1/event1"

[     8.708] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 9)

[     8.708] (**) Option "AccelerationScheme" "none"

[     8.708] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0

[     8.708] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000

[     8.708] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4

[     8.772] (II) event1  - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse

[     8.773] (II) event1  - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer

[     8.777] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)

lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

en première idée je pense a une mauvaise installation de bookworm , mais je me trompe peut être. (une installation neuve pas une migration ? )

nota: je n'utilise pas de paquet "non-free" , mais bon disponible .
tu peux répondre a mon #2

remarque : sous gnome le log de X est dans ton "home"

Dernière modification par debian-noel (14-06-2024 10:31:52)

vanvan · 14-06-2024 12:55:35

Je vous joins les logs. J'ai installé qemu/kvm depuis, mais le problème était déjà présent avant (histoire de ne pas partir sur de fausses pistes)

journalctl -b -r -p err :

root : journalctl -b -r -p err 

juin 14 09:04:06 bureau-debian libvirtd[2865]: Timed out during operation: cannot acquire state change lock (held by monitor=remoteDispatchDomainRevertToSnapshot)

juin 14 08:57:14 bureau-debian systemd[1723]: Failed to start app-gnome-user\x2ddirs\x2dupdate\x2dgtk-2191.scope - Application launched by gnome-session-binary.

juin 14 08:57:12 bureau-debian systemd[1723]: Failed to start app-gnome-gnome\x2dkeyring\x2dssh-1926.scope - Application launched by gnome-session-binary.

juin 14 08:57:12 bureau-debian systemd[1723]: Failed to start app-gnome-gnome\x2dkeyring\x2dsecrets-1929.scope - Application launched by gnome-session-binary.

juin 14 08:57:12 bureau-debian systemd[1723]: Failed to start app-gnome-gnome\x2dkeyring\x2dpkcs11-1928.scope - Application launched by gnome-session-binary.

juin 14 08:57:11 bureau-debian lightdm[1700]: gkr-pam: unable to locate daemon control file

cat /var/log/Xorg.0.log :

user : cat /var/log/Xorg.0.log

[    24.156] 

X.Org X Server 1.21.1.7

X Protocol Version 11, Revision 0

[    24.156] Current Operating System: Linux bureau-debian 6.1.0-21-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) x86_64

[    24.156] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-21-amd64 root=UUID=ff789c87-d412-43a9-bc21-910c6f92f43f ro quiet

[    24.156] xorg-server 2:21.1.7-3+deb12u7 (https://www.debian.org/support) 

[    24.156] Current version of pixman: 0.42.2

[    24.156]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    24.156] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    24.156] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 14 08:48:08 2024

[    24.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    24.160] (==) No Layout section.  Using the first Screen section.

[    24.160] (==) No screen section available. Using defaults.

[    24.160] (**) |-->Screen "Default Screen Section" (0)

[    24.160] (**) |   |-->Monitor "<default monitor>"

[    24.161] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    24.161] (==) Automatically adding devices

[    24.161] (==) Automatically enabling devices

[    24.161] (==) Automatically adding GPU devices

[    24.161] (==) Automatically binding GPU devices

[    24.161] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    24.165] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    24.165]  Entry deleted from font path.

[    24.169] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    24.169] (==) ModulePath set to "/usr/lib/xorg/modules"

[    24.169] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    24.169] (II) Loader magic: 0x562cb8a3cf00

[    24.169] (II) Module ABI versions:

[    24.169]  X.Org ANSI C Emulation: 0.4

[    24.169]  X.Org Video Driver: 25.2

[    24.169]  X.Org XInput driver : 24.4

[    24.169]  X.Org Server Extension : 10.0

[    24.169] (++) using VT number 7

[    24.169] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[    24.170] (II) xfree86: Adding drm device (/dev/dri/card0)

[    24.170] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:10:00.0/drm/card0

[    24.204] (--) PCI:*(16@0:0:0) 1002:67ff:1da2:e348 rev 207, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe900000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072

[    24.205] (II) LoadModule: "glx"

[    24.206] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    24.215] (II) Module glx: vendor="X.Org Foundation"

[    24.215]  compiled for 1.21.1.7, module version = 1.0.0

[    24.215]  ABI class: X.Org Server Extension, version 10.0

[    24.215] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0

[    24.215]  loading driver: amdgpu

[    24.215] (==) Matched amdgpu as autoconfigured driver 0

[    24.215] (==) Matched ati as autoconfigured driver 1

[    24.215] (==) Matched modesetting as autoconfigured driver 2

[    24.215] (==) Matched fbdev as autoconfigured driver 3

[    24.215] (==) Matched vesa as autoconfigured driver 4

[    24.215] (==) Assigned the driver to the xf86ConfigLayout

[    24.215] (II) LoadModule: "amdgpu"

[    24.215] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so

[    24.219] (II) Module amdgpu: vendor="X.Org Foundation"

[    24.219]  compiled for 1.21.1.7, module version = 23.0.0

[    24.219]  Module class: X.Org Video Driver

[    24.219]  ABI class: X.Org Video Driver, version 25.2

[    24.219] (II) LoadModule: "ati"

[    24.219] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so

[    24.220] (II) Module ati: vendor="X.Org Foundation"

[    24.220]  compiled for 1.21.1.3, module version = 19.1.0

[    24.220]  Module class: X.Org Video Driver

[    24.220]  ABI class: X.Org Video Driver, version 25.2

[    24.247] (II) LoadModule: "modesetting"

[    24.247] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    24.248] (II) Module modesetting: vendor="X.Org Foundation"

[    24.248]  compiled for 1.21.1.7, module version = 1.21.1

[    24.248]  Module class: X.Org Video Driver

[    24.248]  ABI class: X.Org Video Driver, version 25.2

[    24.249] (II) LoadModule: "fbdev"

[    24.249] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    24.249] (II) Module fbdev: vendor="X.Org Foundation"

[    24.249]  compiled for 1.21.1.3, module version = 0.5.0

[    24.249]  Module class: X.Org Video Driver

[    24.249]  ABI class: X.Org Video Driver, version 25.2

[    24.249] (II) LoadModule: "vesa"

[    24.249] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    24.250] (II) Module vesa: vendor="X.Org Foundation"

[    24.250]  compiled for 1.21.1.3, module version = 2.5.0

[    24.250]  Module class: X.Org Video Driver

[    24.250]  ABI class: X.Org Video Driver, version 25.2

[    24.250] (II) AMDGPU: Driver for AMD Radeon:

  All GPUs supported by the amdgpu kernel driver

[    24.250] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    24.250] (II) FBDEV: driver for framebuffer: fbdev

[    24.250] (II) VESA: driver for VESA chipsets: vesa

[    24.268] (WW) Falling back to old probe method for modesetting

[    24.270] (WW) Falling back to old probe method for fbdev

[    24.270] (II) Loading sub module "fbdevhw"

[    24.270] (II) LoadModule: "fbdevhw"

[    24.270] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    24.271] (II) Module fbdevhw: vendor="X.Org Foundation"

[    24.271]  compiled for 1.21.1.7, module version = 0.0.2

[    24.271]  ABI class: X.Org Video Driver, version 25.2

[    24.271] (II) AMDGPU(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    24.271] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32

[    24.271] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)

[    24.271] (==) AMDGPU(0): Default visual is TrueColor

[    24.271] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0

[    24.271] (==) AMDGPU(0): RGB weight 888

[    24.271] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)

[    24.271] (--) AMDGPU(0): Chipset: "AMD Radeon RX 560 Series" (ChipID = 0x67ff)

[    24.271] (II) Loading sub module "fb"

[    24.271] (II) LoadModule: "fb"

[    24.271] (II) Module "fb" already built-in

[    24.271] (II) Loading sub module "dri2"

[    24.271] (II) LoadModule: "dri2"

[    24.271] (II) Module "dri2" already built-in

[    24.578] (II) Loading sub module "glamoregl"

[    24.578] (II) LoadModule: "glamoregl"

[    24.578] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    24.587] (II) Module glamoregl: vendor="X.Org Foundation"

[    24.587]  compiled for 1.21.1.7, module version = 1.0.1

[    24.587]  ABI class: X.Org ANSI C Emulation, version 0.4

[    24.615] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon RX 560 Series (polaris11, LLVM 15.0.6, DRM 3.49, 6.1.0-21-amd64)

[    24.615] (II) AMDGPU(0): glamor detected, initialising EGL layer.

[    24.615] (==) AMDGPU(0): TearFree property default: auto

[    24.615] (==) AMDGPU(0): VariableRefresh: disabled

[    24.615] (==) AMDGPU(0): AsyncFlipSecondaries: disabled

[    24.615] (II) AMDGPU(0): KMS Pageflipping: enabled

[    24.615] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section

[    24.615] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section

[    24.615] (II) AMDGPU(0): Output DVI-D-0 has no monitor section

[    24.616] (II) AMDGPU(0): EDID for output DisplayPort-0

[    24.616] (II) AMDGPU(0): EDID for output HDMI-A-0

[    24.616] (II) AMDGPU(0): EDID for output DVI-D-0

[    24.616] (II) AMDGPU(0): Manufacturer: IVM  Model: 6113  Serial#: 5856

[    24.616] (II) AMDGPU(0): Year: 2016  Week: 8

[    24.616] (II) AMDGPU(0): EDID Version: 1.3

[    24.616] (II) AMDGPU(0): Digital Display Input

[    24.616] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 53  vert.: 30

[    24.616] (II) AMDGPU(0): Gamma: 2.20

[    24.616] (II) AMDGPU(0): DPMS capabilities: Off

[    24.616] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 

[    24.616] (II) AMDGPU(0): First detailed timing is preferred mode

[    24.616] (II) AMDGPU(0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619

[    24.616] (II) AMDGPU(0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329

[    24.616] (II) AMDGPU(0): Supported established timings:

[    24.616] (II) AMDGPU(0): 640x480@60Hz

[    24.616] (II) AMDGPU(0): 640x480@67Hz

[    24.616] (II) AMDGPU(0): 800x600@56Hz

[    24.616] (II) AMDGPU(0): 800x600@60Hz

[    24.616] (II) AMDGPU(0): 1024x768@60Hz

[    24.616] (II) AMDGPU(0): Manufacturer's mask: 0

[    24.616] (II) AMDGPU(0): Supported standard timings:

[    24.616] (II) AMDGPU(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113

[    24.616] (II) AMDGPU(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513

[    24.616] (II) AMDGPU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897

[    24.616] (II) AMDGPU(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553

[    24.616] (II) AMDGPU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179

[    24.616] (II) AMDGPU(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149

[    24.616] (II) AMDGPU(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361

[    24.616] (II) AMDGPU(0): Supported detailed timing:

[    24.616] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  531 x 299 mm

[    24.616] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0

[    24.616] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0

[    24.616] (II) AMDGPU(0): Serial No: 1127860825856

[    24.616] (II) AMDGPU(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz

[    24.616] (II) AMDGPU(0): Monitor name: PLE2483H

[    24.616] (II) AMDGPU(0): EDID (in hex):

[    24.616] (II) AMDGPU(0):  00ffffffffffff0026cd1361e0160000

[    24.616] (II) AMDGPU(0):  081a010380351e782a0ef5a555509e26

[    24.617] (II) AMDGPU(0):  105054330800710081408180a940b300

[    24.617] (II) AMDGPU(0):  9500d1c00101023a801871382d40582c

[    24.617] (II) AMDGPU(0):  4500132b2100001e000000ff00313132

[    24.617] (II) AMDGPU(0):  37383630383235383536000000fd0037

[    24.617] (II) AMDGPU(0):  4c1e5311000a202020202020000000fc

[    24.617] (II) AMDGPU(0):  00504c4532343833480a2020202000f1

[    24.617] (II) AMDGPU(0): Printing probed modes for output DVI-D-0

[    24.617] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)

[    24.617] (II) AMDGPU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "1280x800"x60.0  148.50  1280 2008 2052 2200  800 1084 1089 1125 +hsync +vsync (67.5 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "1280x720"x60.0  148.50  1280 2008 2052 2200  720 1084 1089 1125 +hsync +vsync (67.5 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    24.617] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    24.617] (II) AMDGPU(0): Output DisplayPort-0 disconnected

[    24.617] (II) AMDGPU(0): Output HDMI-A-0 disconnected

[    24.617] (II) AMDGPU(0): Output DVI-D-0 connected

[    24.617] (II) AMDGPU(0): Using exact sizes for initial modes

[    24.617] (II) AMDGPU(0): Output DVI-D-0 using initial mode 1920x1080 +0+0

[    24.617] (II) AMDGPU(0): mem size init: gart size :2ecc98800 vram size: s:feae7000 visible:f5e7000

[    24.617] (==) AMDGPU(0): DPI set to (96, 96)

[    24.617] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)

[    24.617] (II) Loading sub module "ramdac"

[    24.617] (II) LoadModule: "ramdac"

[    24.617] (II) Module "ramdac" already built-in

[    24.617] (II) UnloadModule: "modesetting"

[    24.617] (II) Unloading modesetting

[    24.617] (II) UnloadModule: "fbdev"

[    24.617] (II) Unloading fbdev

[    24.617] (II) UnloadSubModule: "fbdevhw"

[    24.617] (II) Unloading fbdevhw

[    24.617] (II) UnloadModule: "vesa"

[    24.617] (II) Unloading vesa

[    24.618] (II) AMDGPU(0): [DRI2] Setup complete

[    24.618] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi

[    24.618] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi

[    24.619] (II) AMDGPU(0): Front buffer pitch: 7680 bytes

[    24.619] (II) AMDGPU(0): SYNC extension fences enabled

[    24.619] (II) AMDGPU(0): Present extension enabled

[    24.619] (==) AMDGPU(0): DRI3 enabled

[    24.619] (==) AMDGPU(0): Backing store enabled

[    24.619] (II) AMDGPU(0): Direct rendering enabled

[    24.639] (II) AMDGPU(0): Use GLAMOR acceleration.

[    24.639] (II) AMDGPU(0): Acceleration enabled

[    24.639] (==) AMDGPU(0): DPMS enabled

[    24.639] (==) AMDGPU(0): Silken mouse enabled

[    24.640] (II) AMDGPU(0): Set up textured video (glamor)

[    24.647] (WW) AMDGPU(0): Option "HotplugDriver" is not used

[    24.647] (II) Initializing extension Generic Event Extension

[    24.647] (II) Initializing extension SHAPE

[    24.647] (II) Initializing extension MIT-SHM

[    24.648] (II) Initializing extension XInputExtension

[    24.648] (II) Initializing extension XTEST

[    24.648] (II) Initializing extension BIG-REQUESTS

[    24.648] (II) Initializing extension SYNC

[    24.648] (II) Initializing extension XKEYBOARD

[    24.648] (II) Initializing extension XC-MISC

[    24.648] (II) Initializing extension SECURITY

[    24.648] (II) Initializing extension XFIXES

[    24.649] (II) Initializing extension RENDER

[    24.649] (II) Initializing extension RANDR

[    24.649] (II) Initializing extension COMPOSITE

[    24.649] (II) Initializing extension DAMAGE

[    24.649] (II) Initializing extension MIT-SCREEN-SAVER

[    24.649] (II) Initializing extension DOUBLE-BUFFER

[    24.649] (II) Initializing extension RECORD

[    24.649] (II) Initializing extension DPMS

[    24.649] (II) Initializing extension Present

[    24.649] (II) Initializing extension DRI3

[    24.649] (II) Initializing extension X-Resource

[    24.649] (II) Initializing extension XVideo

[    24.649] (II) Initializing extension XVideo-MotionCompensation

[    24.649] (II) Initializing extension SELinux

[    24.649] (II) SELinux: Disabled on system

[    24.649] (II) Initializing extension GLX

[    24.655] (II) AIGLX: Loaded and initialized radeonsi

[    24.655] (II) GLX: Initialized DRI2 GL provider for screen 0

[    24.655] (II) Initializing extension XFree86-VidModeExtension

[    24.655] (II) Initializing extension XFree86-DGA

[    24.655] (II) Initializing extension XFree86-DRI

[    24.655] (II) Initializing extension DRI2

[    24.656] (II) AMDGPU(0): Setting screen physical size to 508 x 285

[    24.790] (II) config/udev: Adding input device Power Button (/dev/input/event1)

[    24.790] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    24.790] (II) LoadModule: "libinput"

[    24.790] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    24.795] (II) Module libinput: vendor="X.Org Foundation"

[    24.795]  compiled for 1.21.1.3, module version = 1.2.1

[    24.795]  Module class: X.Org XInput Driver

[    24.795]  ABI class: X.Org XInput driver, version 24.4

[    24.795] (II) Using input driver 'libinput' for 'Power Button'

[    24.795] (**) Power Button: always reports core events

[    24.795] (**) Option "Device" "/dev/input/event1"

[    24.800] (II) event1  - Power Button: is tagged by udev as: Keyboard

[    24.800] (II) event1  - Power Button: device is a keyboard

[    24.801] (II) event1  - Power Button: device removed

[    24.836] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"

[    24.836] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    24.836] (**) Option "xkb_model" "pc105"

[    24.836] (**) Option "xkb_layout" "fr"

[    24.836] (**) Option "xkb_variant" "latin9"

[    24.857] (II) event1  - Power Button: is tagged by udev as: Keyboard

[    24.857] (II) event1  - Power Button: device is a keyboard

[    24.858] (II) config/udev: Adding input device Video Bus (/dev/input/event2)

[    24.858] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    24.858] (II) Using input driver 'libinput' for 'Video Bus'

[    24.858] (**) Video Bus: always reports core events

[    24.858] (**) Option "Device" "/dev/input/event2"

[    24.860] (II) event2  - Video Bus: is tagged by udev as: Keyboard

[    24.860] (II) event2  - Video Bus: device is a keyboard

[    24.860] (II) event2  - Video Bus: device removed

[    24.892] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2/event2"

[    24.892] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    24.892] (**) Option "xkb_model" "pc105"

[    24.892] (**) Option "xkb_layout" "fr"

[    24.892] (**) Option "xkb_variant" "latin9"

[    24.893] (II) event2  - Video Bus: is tagged by udev as: Keyboard

[    24.893] (II) event2  - Video Bus: device is a keyboard

[    24.894] (II) config/udev: Adding input device Power Button (/dev/input/event0)

[    24.894] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    24.894] (II) Using input driver 'libinput' for 'Power Button'

[    24.894] (**) Power Button: always reports core events

[    24.894] (**) Option "Device" "/dev/input/event0"

[    24.896] (II) event0  - Power Button: is tagged by udev as: Keyboard

[    24.896] (II) event0  - Power Button: device is a keyboard

[    24.896] (II) event0  - Power Button: device removed

[    24.956] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"

[    24.956] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)

[    24.956] (**) Option "xkb_model" "pc105"

[    24.956] (**) Option "xkb_layout" "fr"

[    24.956] (**) Option "xkb_variant" "latin9"

[    24.957] (II) event0  - Power Button: is tagged by udev as: Keyboard

[    24.957] (II) event0  - Power Button: device is a keyboard

[    24.958] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)

[    24.958] (II) No input driver specified, ignoring this device.

[    24.958] (II) This device may have been added with another device file.

[    24.958] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event9)

[    24.958] (II) No input driver specified, ignoring this device.

[    24.958] (II) This device may have been added with another device file.

[    24.959] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event10)

[    24.959] (II) No input driver specified, ignoring this device.

[    24.959] (II) This device may have been added with another device file.

[    24.959] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event11)

[    24.959] (II) No input driver specified, ignoring this device.

[    24.959] (II) This device may have been added with another device file.

[    24.960] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event12)

[    24.960] (II) No input driver specified, ignoring this device.

[    24.960] (II) This device may have been added with another device file.

[    24.960] (II) config/udev: Adding input device Live Streamer CAM 313: Live Str (/dev/input/event20)

[    24.960] (**) Live Streamer CAM 313: Live Str: Applying InputClass "libinput keyboard catchall"

[    24.960] (II) Using input driver 'libinput' for 'Live Streamer CAM 313: Live Str'

[    24.960] (**) Live Streamer CAM 313: Live Str: always reports core events

[    24.960] (**) Option "Device" "/dev/input/event20"

[    24.962] (II) event20 - Live Streamer CAM 313: Live Str: is tagged by udev as: Keyboard

[    24.962] (II) event20 - Live Streamer CAM 313: Live Str: device is a keyboard

[    24.962] (II) event20 - Live Streamer CAM 313: Live Str: device removed

[    25.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.0/input/input45/event20"

[    25.016] (II) XINPUT: Adding extended input device "Live Streamer CAM 313: Live Str" (type: KEYBOARD, id 9)

[    25.016] (**) Option "xkb_model" "pc105"

[    25.016] (**) Option "xkb_layout" "fr"

[    25.016] (**) Option "xkb_variant" "latin9"

[    25.018] (II) event20 - Live Streamer CAM 313: Live Str: is tagged by udev as: Keyboard

[    25.018] (II) event20 - Live Streamer CAM 313: Live Str: device is a keyboard

[    25.019] (II) config/udev: Adding input device Logitech Wireless Keyboard PID:4023 (/dev/input/event5)

[    25.019] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "libinput keyboard catchall"

[    25.019] (II) Using input driver 'libinput' for 'Logitech Wireless Keyboard PID:4023'

[    25.019] (**) Logitech Wireless Keyboard PID:4023: always reports core events

[    25.019] (**) Option "Device" "/dev/input/event5"

[    25.021] (II) event5  - Logitech Wireless Keyboard PID:4023: is tagged by udev as: Keyboard

[    25.021] (II) event5  - Logitech Wireless Keyboard PID:4023: device is a keyboard

[    25.022] (II) event5  - Logitech Wireless Keyboard PID:4023: device removed

[    25.064] (II) libinput: Logitech Wireless Keyboard PID:4023: needs a virtual subdevice

[    25.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8:1.1/0003:046D:C534.0006/0003:046D:4023.0008/input/input30/event5"

[    25.064] (II) XINPUT: Adding extended input device "Logitech Wireless Keyboard PID:4023" (type: MOUSE, id 10)

[    25.064] (**) Option "AccelerationScheme" "none"

[    25.064] (**) Logitech Wireless Keyboard PID:4023: (accel) selected scheme none/0

[    25.064] (**) Logitech Wireless Keyboard PID:4023: (accel) acceleration factor: 2.000

[    25.064] (**) Logitech Wireless Keyboard PID:4023: (accel) acceleration threshold: 4

[    25.066] (II) event5  - Logitech Wireless Keyboard PID:4023: is tagged by udev as: Keyboard

[    25.066] (II) event5  - Logitech Wireless Keyboard PID:4023: device is a keyboard

[    25.067] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/event6)

[    25.067] (**) Logitech Wireless Mouse: Applying InputClass "libinput pointer catchall"

[    25.067] (**) Logitech Wireless Mouse: Applying InputClass "libinput keyboard catchall"

[    25.067] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse'

[    25.067] (**) Logitech Wireless Mouse: always reports core events

[    25.067] (**) Option "Device" "/dev/input/event6"

[    25.069] (II) event6  - Logitech Wireless Mouse: is tagged by udev as: Keyboard Mouse

[    25.069] (II) event6  - Logitech Wireless Mouse: device is a pointer

[    25.069] (II) event6  - Logitech Wireless Mouse: device is a keyboard

[    25.069] (II) event6  - Logitech Wireless Mouse: device removed

[    25.108] (II) libinput: Logitech Wireless Mouse: needs a virtual subdevice

[    25.108] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8:1.1/0003:046D:C534.0006/0003:046D:4054.0009/input/input31/event6"

[    25.108] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse" (type: MOUSE, id 11)

[    25.108] (**) Option "AccelerationScheme" "none"

[    25.108] (**) Logitech Wireless Mouse: (accel) selected scheme none/0

[    25.108] (**) Logitech Wireless Mouse: (accel) acceleration factor: 2.000

[    25.108] (**) Logitech Wireless Mouse: (accel) acceleration threshold: 4

[    25.110] (II) event6  - Logitech Wireless Mouse: is tagged by udev as: Keyboard Mouse

[    25.110] (II) event6  - Logitech Wireless Mouse: device is a pointer

[    25.110] (II) event6  - Logitech Wireless Mouse: device is a keyboard

[    25.112] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/mouse0)

[    25.112] (II) No input driver specified, ignoring this device.

[    25.112] (II) This device may have been added with another device file.

[    25.113] (II) config/udev: Adding input device Logitech K270 (/dev/input/event4)

[    25.113] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"

[    25.113] (II) Using input driver 'libinput' for 'Logitech K270'

[    25.113] (**) Logitech K270: always reports core events

[    25.113] (**) Option "Device" "/dev/input/event4"

[    25.115] (II) event4  - Logitech K270: is tagged by udev as: Keyboard

[    25.115] (II) event4  - Logitech K270: device is a keyboard

[    25.115] (II) event4  - Logitech K270: device removed

[    25.140] (II) libinput: Logitech K270: needs a virtual subdevice

[    25.140] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input29/event4"

[    25.140] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 12)

[    25.140] (**) Option "AccelerationScheme" "none"

[    25.140] (**) Logitech K270: (accel) selected scheme none/0

[    25.140] (**) Logitech K270: (accel) acceleration factor: 2.000

[    25.140] (**) Logitech K270: (accel) acceleration threshold: 4

[    25.142] (II) event4  - Logitech K270: is tagged by udev as: Keyboard

[    25.142] (II) event4  - Logitech K270: device is a keyboard

[    25.144] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event3)

[    25.144] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"

[    25.144] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'

[    25.144] (**) SIGMACHIP Usb Mouse: always reports core events

[    25.144] (**) Option "Device" "/dev/input/event3"

[    25.205] (II) event3  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse

[    25.206] (II) event3  - SIGMACHIP Usb Mouse: device is a pointer

[    25.206] (II) event3  - SIGMACHIP Usb Mouse: device removed

[    25.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.0/0003:1C4F:0034.0004/input/input14/event3"

[    25.236] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 13)

[    25.236] (**) Option "AccelerationScheme" "none"

[    25.236] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0

[    25.236] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000

[    25.236] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4

[    25.299] (II) event3  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse

[    25.299] (II) event3  - SIGMACHIP Usb Mouse: device is a pointer

[    25.301] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse2)

[    25.301] (II) No input driver specified, ignoring this device.

[    25.301] (II) This device may have been added with another device file.

[    25.302] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event13)

[    25.302] (II) No input driver specified, ignoring this device.

[    25.302] (II) This device may have been added with another device file.

[    25.303] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event14)

[    25.304] (II) No input driver specified, ignoring this device.

[    25.304] (II) This device may have been added with another device file.

[    25.305] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event15)

[    25.305] (II) No input driver specified, ignoring this device.

[    25.305] (II) This device may have been added with another device file.

[    25.306] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event16)

[    25.306] (II) No input driver specified, ignoring this device.

[    25.306] (II) This device may have been added with another device file.

[    25.307] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event17)

[    25.307] (II) No input driver specified, ignoring this device.

[    25.307] (II) This device may have been added with another device file.

[    25.308] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event18)

[    25.308] (II) No input driver specified, ignoring this device.

[    25.308] (II) This device may have been added with another device file.

[    25.309] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event19)

[    25.309] (II) No input driver specified, ignoring this device.

[    25.309] (II) This device may have been added with another device file.

[    25.310] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)

[    25.310] (II) No input driver specified, ignoring this device.

[    25.310] (II) This device may have been added with another device file.

[    25.322] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "libinput keyboard catchall"

[    25.322] (II) Using input driver 'libinput' for 'Logitech Wireless Keyboard PID:4023'

[    25.322] (**) Logitech Wireless Keyboard PID:4023: always reports core events

[    25.322] (**) Option "Device" "/dev/input/event5"

[    25.322] (II) libinput: Logitech Wireless Keyboard PID:4023: is a virtual subdevice

[    25.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8:1.1/0003:046D:C534.0006/0003:046D:4023.0008/input/input30/event5"

[    25.322] (II) XINPUT: Adding extended input device "Logitech Wireless Keyboard PID:4023" (type: KEYBOARD, id 14)

[    25.322] (**) Option "xkb_model" "pc105"

[    25.322] (**) Option "xkb_layout" "fr"

[    25.322] (**) Option "xkb_variant" "latin9"

[    25.322] (**) Logitech Wireless Mouse: Applying InputClass "libinput pointer catchall"

[    25.322] (**) Logitech Wireless Mouse: Applying InputClass "libinput keyboard catchall"

[    25.322] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse'

[    25.322] (**) Logitech Wireless Mouse: always reports core events

[    25.323] (**) Option "Device" "/dev/input/event6"

[    25.323] (II) libinput: Logitech Wireless Mouse: is a virtual subdevice

[    25.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8:1.1/0003:046D:C534.0006/0003:046D:4054.0009/input/input31/event6"

[    25.323] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse" (type: KEYBOARD, id 15)

[    25.323] (**) Option "xkb_model" "pc105"

[    25.323] (**) Option "xkb_layout" "fr"

[    25.323] (**) Option "xkb_variant" "latin9"

[    25.323] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"

[    25.323] (II) Using input driver 'libinput' for 'Logitech K270'

[    25.323] (**) Logitech K270: always reports core events

[    25.323] (**) Option "Device" "/dev/input/event4"

[    25.323] (II) libinput: Logitech K270: is a virtual subdevice

[    25.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input29/event4"

[    25.323] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 16)

[    25.323] (**) Option "xkb_model" "pc105"

[    25.323] (**) Option "xkb_layout" "fr"

[    25.323] (**) Option "xkb_variant" "latin9"

[   567.707] (II) AMDGPU(0): EDID vendor "IVM", prod id 24851

[   567.707] (II) AMDGPU(0): Using EDID range info for horizontal sync

[   567.707] (II) AMDGPU(0): Using EDID range info for vertical refresh

[   567.707] (II) AMDGPU(0): Printing DDC gathered Modelines:

[   567.707] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)

[   567.707] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)

[   567.707] (II) AMDGPU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[   569.047] (II) AMDGPU(0): EDID vendor "IVM", prod id 24851

[   569.047] (II) AMDGPU(0): Using hsync ranges from config file

[   569.047] (II) AMDGPU(0): Using vrefresh ranges from config file

[   569.047] (II) AMDGPU(0): Printing DDC gathered Modelines:

[   569.047] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)

[   569.047] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)

[   569.047] (II) AMDGPU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

[  4841.826] (II) event3  - SIGMACHIP Usb Mouse: Enabling spurious button debouncing, see https://wayland.freedesktop.org/libinput/doc/1.22.1/button-debouncing.html for details

[  8419.725] (II) AMDGPU(0): EDID vendor "IVM", prod id 24851

[  8419.725] (II) AMDGPU(0): Using hsync ranges from config file

[  8419.725] (II) AMDGPU(0): Using vrefresh ranges from config file

[  8419.725] (II) AMDGPU(0): Printing DDC gathered Modelines:

[  8419.725] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)

[  8419.725] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)

[  8419.725] (II) AMDGPU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)

vanvan · 14-06-2024 12:59:38

lspci

user : lspci

00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex

00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU

01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge

01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0]

01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0]

08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge

08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A

08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B

14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)

14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)

18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 0

18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 1

18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 2

18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3

18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 4

18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 5

18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 6

18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 7

00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 550 640SP / RX 560/560X] (rev cf)

00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]

00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset USB 3.1 xHCI Compliant Host Controller (rev 01)

00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller (rev 01)

00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Bridge (rev 01)

00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)

01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)

04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)

00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function (rev c6)

00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor

00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1

00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1

00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller

00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 61)

lsusb

user : lsusb

Bus 006 Device 002: ID 0951:1666 Kingston Technology DataTraveler 100 G3/G4/SE9 G2/50 Kyson

Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 003 Device 003: ID 1c4f:0034 SiGma Micro XM102K Optical Wheel Mouse

Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 002: ID 11b0:3306 ATECH FLASH TECHNOLOGY UHS-II SD Reader

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver

Bus 001 Device 002: ID 07ca:313a AVerMedia Technologies, Inc. Live Streamer CAM 313

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

J'ai bien 2 "Logitech, Inc. Unifying Receiver" de connectés.
A la base j'avais un pack clavier+souris. A cause du problème de freeze, j'ai branché une deuxième clé pour essayer une autre souris, et j'ai oublié de l'enlever avant de lancer les commandes.

Pour commencer, je vais peut-être rajouter contrib et non-free, car je trouve bizarre que le passage de buster à bookworm (nouvelle installation et non upgrade) pose ce problème.

Dernière modification par vanvan (14-06-2024 13:02:36)

debian-noel · 14-06-2024 15:48:33

tu a besoin de firmware-amd-graphics (installé automatiquement a l'installation ) et de firmware-realtek ( réseau peut être installé aussi )

apt policy firmware-amd-graphics firmware-realtek

 

tu a pas mal de choses en usb , mais bon la logique veux que tu n'a pas touché aux branchements , donc peux de chance que tes ports usb sature en débit .
ps: ton cpu n' a pas de gpu (apu) ?
tu a une carte RX550 en PCIe ?
tout semble correct , même le retour des erreurs , pas de trace des freezes .
quand le sources.list est correct , un apt update et apt upgrade
ta machine est plus que correcte , je suppose que 8 ou 16G0 de mémoire ? (ou plus)

dezix · 14-06-2024 17:01:43

Boujour,

selon ce que je crois comprendre dans : https://linux-hardware.org/?id=usb:1c4f-0034

Ce matériel est nativement supporté par les noyaux linux de version jusqu'à 6.3 (et probablement au delà ????)

Quelle est la version actuelle de ton noyau ?

uname -r

vanvan · 14-06-2024 17:11:26

apt policy firmware-amd-graphics firmware-realtek

firmware-amd-graphics:

  Installé : 20230210-5

  Candidat : 20230210-5

 Table de version :

 *** 20230210-5 500

        500 http://miroir.univ-lorraine.fr/debian bookworm/non-free-firmware amd64 Packages

        100 /var/lib/dpkg/status

firmware-realtek:

  Installé : 20230210-5

  Candidat : 20230210-5

 Table de version :

 *** 20230210-5 500

        500 http://miroir.univ-lorraine.fr/debian bookworm/non-free-firmware amd64 Packages

        100 /var/lib/dpkg/status

CPU: AMD Ryzen 5 2400G 3,6GHz with Radeon Vega Graphics
Carte graphique : Sapphire Pulse Radeon RX 560 4Go (PCI Express 3.0 x16)
Et 24Go de RAM.

uname -r

6.1.0-21-amd64

J'ai fait la mise à jour avec le rajout de contrib et non-free, pas de changement.

Dernière modification par vanvan (14-06-2024 17:12:25)

dezix · 14-06-2024 17:20:44

Pur bidouillage à tâtons...

T'as testé de déconnecter les autres périphériques usb - notamment les récepteurs logitech - et changer le port,
au cas d'une "interférence " entre matériel ou port problématique ?

Mis une pile neuve ???

Dernière modification par dezix (14-06-2024 17:21:58)

vanvan · 14-06-2024 17:23:06

J'avais cru à ça un moment. J'avais l'impression que ça marchait mieux si j'enlevais la clé usb qui est souvent à côté (pb électrique ?) mais c'est revenu un peu plus tard même sans la clé...

dezix · 14-06-2024 17:24:29

Et la pile ?

dezix · 14-06-2024 17:27:07

vanvan a écrit :

SiGma Micro XM102K Optical Wheel Mouse

ça, c'est pas la souris en question, s'en est une autre ?

vanvan · 14-06-2024 18:02:36

SiGma Micro XM102K Optical Wheel Mouse : souris filaire (qui marche bien)

ID 046d:c52b Logitech, Inc. Unifying Receiver : clavier sans fil

ID 046d:c534 Logitech, Inc. Unifying Receiver : souris sans fil (j'en ai essayé 2 différentes, et pour la pile, je me suis posé la question car j'utilise des piles rechargeables, donc 1,2V et non 1,5V, mais je n'ai pas de souci sous windows. Je vais peut-être essayer quand même une vrai pile).

Edit :
du coup j'ai vérifié avec une pile de 1,5V pour être sûr, puis avec clavier et souris du même pack, donc avec un seul récepteur usb, histoire d'être sûr que ce ne soit pas les 2 récepteurs qui se perturbaient, et rien de neuf...

Dernière modification par vanvan (14-06-2024 21:06:10)

Debian-facile

#1 14-06-2024 08:55:39

Pb souris sans fil logitech

#2 14-06-2024 09:31:34

Re : Pb souris sans fil logitech

#3 14-06-2024 09:41:33

Re : Pb souris sans fil logitech

#4 14-06-2024 09:45:58

Re : Pb souris sans fil logitech

#5 14-06-2024 10:15:21

Re : Pb souris sans fil logitech

#6 14-06-2024 12:55:35

Re : Pb souris sans fil logitech

#7 14-06-2024 12:59:38

Re : Pb souris sans fil logitech

#8 14-06-2024 15:48:33

Re : Pb souris sans fil logitech

#9 14-06-2024 17:01:43

Re : Pb souris sans fil logitech

#10 14-06-2024 17:11:26

Re : Pb souris sans fil logitech

#11 14-06-2024 17:20:44

Re : Pb souris sans fil logitech

#12 14-06-2024 17:23:06

Re : Pb souris sans fil logitech

#13 14-06-2024 17:24:29

Re : Pb souris sans fil logitech

#14 14-06-2024 17:27:07

Re : Pb souris sans fil logitech

#15 14-06-2024 18:02:36

Re : Pb souris sans fil logitech

Pied de page des forums