Bon, ben, merci a vous deux vous m'avez mis sur la bonne direction de recherche, je pense.
Pour info il semble que le fait d'avoir mis le paramètre du bios plug'n play "PnP OS=non" ai changé la donne.
Je vous laisse le retour complet d'un "dmesg" car il me semble qu'il reste tout de même quelques erreurs.
Si vous en avez le courage.
Question : Le fait que j'ai plusieurs services sur le même irq (9) ne peut il pas poser problèmes?
Encore merci.
Edit : Faite moi signe que je le passe en résolu. Si ok d'après vous.
~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 01:04:36 UTC 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
[ 0.000000] BIOS-e820: 000000000bff0000 - 000000000bfff800 (ACPI data)
[ 0.000000] BIOS-e820: 000000000bfff800 - 000000000c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.1 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF8000000 write-back
[ 0.000000] 1 base 008000000 mask FFC000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000bff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000bc00000 page 2M
[ 0.000000] 000bc00000 - 000bff0000 page 4k
[ 0.000000] kernel direct mapping tables up to bff0000 @ 10000-16000
[ 0.000000] RAMDISK: 087df000 - 090333c3
[ 0.000000] ACPI: RSDP 000f7120 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0bffc8f8 0002C (v01 SONY K1 19991217 PTL 00000000)
[ 0.000000] ACPI: FACP 0bfff765 00074 (v01 SONY K1 19991217 PTL 000F4240)
[ 0.000000] ACPI: DSDT 0bffc924 02E41 (v01 SONY K1 19991217 MSFT 01000007)
[ 0.000000] ACPI: FACS 0bffffc0 00040
[ 0.000000] ACPI: BOOT 0bfff7d9 00027 (v01 SONY A0 19991217 PTL 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 191MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0bff0000
[ 0.000000] low ram: 0 - 0bff0000
[ 0.000000] node 0 low ram: 00000000 - 0bff0000
[ 0.000000] node 0 bootmap 00012000 - 00013800
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000bff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ced2c] TEXT DATA BSS ==> [0001000000 - 00014ced2c]
[ 0.000000] #4 [00087df000 - 00090333c3] RAMDISK ==> [00087df000 - 00090333c3]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00014cf000 - 00014d5121] BRK ==> [00014cf000 - 00014d5121]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000014000] BOOTMAP ==> [0000012000 - 0000014000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000bff0
[ 0.000000] HighMem 0x0000bff0 -> 0x0000bff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000bff0
[ 0.000000] On node 0 totalpages: 49023
[ 0.000000] free_area_init_node: node 0, pgdat c13b6900, node_mem_map c14d7200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 352 pages used for memmap
[ 0.000000] Normal zone: 44688 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000eb000
[ 0.000000] PM: Registered nosave memory: 00000000000eb000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c000000 (gap: c000000:f3f80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34360 r0 d22984 u4194304
[ 0.000000] pcpu-alloc: s34360 r0 d22984 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48639
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=1772996b-1cd8-42c7-ae53-86b178f127ca ro quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 180612k/196544k available (2509k kernel code, 15320k reserved, 1331k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xcc7f0000 - 0xff3fe000 ( 812 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcbff0000 ( 191 MB)
[ 0.000000] .init : 0xc13c1000 - 0xc1420000 ( 380 kB)
[ 0.000000] .data : 0xc12735eb - 0xc13c0504 (1331 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12735eb (2509 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 446.636 MHz processor.
[ 0.008015] Calibrating delay loop (skipped), value calculated using timer frequency.. 893.27 BogoMIPS (lpj=1786544)
[ 0.008096] Security Framework initialized
[ 0.008123] SELinux: Disabled at boot.
[ 0.008159] Mount-cache hash table entries: 512
[ 0.008658] Initializing cgroup subsys ns
[ 0.008675] Initializing cgroup subsys cpuacct
[ 0.008697] Initializing cgroup subsys devices
[ 0.008710] Initializing cgroup subsys freezer
[ 0.008722] Initializing cgroup subsys net_cls
[ 0.008824] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.008839] CPU: L2 cache: 256K
[ 0.008861] mce: CPU supports 5 MCE banks
[ 0.008924] Performance Events:
[ 0.008935] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.008947] no hardware sampling interrupt available.
[ 0.008957] p6 PMU driver.
[ 0.008990] ... version: 0
[ 0.009000] ... bit width: 32
[ 0.009010] ... generic registers: 2
[ 0.009020] ... value mask: 00000000ffffffff
[ 0.009031] ... max period: 000000007fffffff
[ 0.009042] ... fixed-purpose events: 0
[ 0.009052] ... event mask: 0000000000000003
[ 0.009069] Checking 'hlt' instruction... OK.
[ 0.025049] SMP alternatives: switching to UP code
[ 0.037806] Freeing SMP alternatives: 13k freed
[ 0.037857] ACPI: Core revision 20090903
[ 0.052251] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.052267] weird, boot CPU (#0) not listed by the BIOS.
[ 0.052276] SMP motherboard not detected.
[ 0.052288] Local APIC not detected. Using dummy APIC emulation.
[ 0.052298] SMP disabled
[ 0.053049] Brought up 1 CPUs
[ 0.053065] Total of 1 processors activated (893.27 BogoMIPS).
[ 0.053112] CPU0 attaching NULL sched-domain.
[ 0.053700] devtmpfs: initialized
[ 0.056336] regulator: core version 0.5
[ 0.056611] NET: Registered protocol family 16
[ 0.057050] ACPI: bus type pci registered
[ 0.073686] PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1
[ 0.073699] PCI: Using configuration type 1 for base access
[ 0.075700] bio: create slab <bio-0> at 0
[ 0.077893] ACPI: EC: Look up EC in DSDT
[ 0.098474] ACPI: Interpreter enabled
[ 0.098497] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.098619] ACPI: Using PIC for interrupt routing
[ 0.159028] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
[ 0.159588] ACPI: No dock devices found.
[ 0.164353] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.164527] pci 0000:00:00.0: reg 10 32bit mmio pref: [0x40000000-0x40ffffff]
[ 0.164814] pci 0000:00:07.1: reg 20 io port: [0xfc90-0xfc9f]
[ 0.164919] pci 0000:00:07.2: reg 20 io port: [0xfca0-0xfcbf]
[ 0.165043] pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
[ 0.165061] pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
[ 0.165083] pci 0000:00:07.3: PIIX4 devres I PIO at 0398-0399
[ 0.165099] pci 0000:00:07.3: PIIX4 devres J PIO at 0398-0399
[ 0.165188] pci 0000:00:08.0: reg 10 32bit mmio: [0xfedf7000-0xfedf77ff]
[ 0.165212] pci 0000:00:08.0: reg 14 32bit mmio: [0xfedf7c00-0xfedf7dff]
[ 0.165257] pci 0000:00:08.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.165361] pci 0000:00:09.0: reg 10 32bit mmio: [0xfedf8000-0xfedfffff]
[ 0.165384] pci 0000:00:09.0: reg 14 io port: [0xfcc0-0xfcff]
[ 0.165404] pci 0000:00:09.0: reg 18 io port: [0xfc8c-0xfc8f]
[ 0.165475] pci 0000:00:09.0: supports D2
[ 0.165544] pci 0000:00:0c.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.165592] pci 0000:00:0c.0: supports D1 D2
[ 0.165605] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165622] pci 0000:00:0c.0: PME# disabled
[ 0.165686] pci 0000:00:0c.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.165734] pci 0000:00:0c.1: supports D1 D2
[ 0.165747] pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165762] pci 0000:00:0c.1: PME# disabled
[ 0.165885] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xfd000000-0xfdffffff]
[ 0.165909] pci 0000:01:00.0: reg 14 32bit mmio: [0xfe800000-0xfebfffff]
[ 0.165930] pci 0000:01:00.0: reg 18 32bit mmio: [0xfec00000-0xfecfffff]
[ 0.165997] pci 0000:01:00.0: supports D1 D2
[ 0.166077] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfecfffff]
[ 0.166095] pci 0000:00:01.0: bridge 32bit mmio pref: [0xfd000000-0xfdffffff]
[ 0.166174] pci_bus 0000:00: on NUMA node 0
[ 0.166196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.175978] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 0.176428] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
[ 0.177046] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[ 0.177661] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 0.178115] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178130] vgaarb: loaded
[ 0.178478] PCI: Using ACPI for IRQ routing
[ 0.179067] Switching to clocksource tsc
[ 0.182131] pnp: PnP ACPI init
[ 0.182208] ACPI: bus type pnp registered
[ 0.260304] pnp: PnP ACPI: found 14 devices
[ 0.260319] ACPI: ACPI bus type pnp unregistered
[ 0.260339] PnPBIOS: Disabled by ACPI PNP
[ 0.260391] system 00:01: ioport range 0x398-0x399 has been reserved
[ 0.260409] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.260427] system 00:01: ioport range 0x1040-0x104f has been reserved
[ 0.260445] system 00:01: ioport range 0x8000-0x804f could not be reserved
[ 0.260483] system 00:02: iomem range 0x100000-0xbffffff could not be reserved
[ 0.260501] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 0.260519] system 00:02: iomem range 0xe0000-0xfffff could not be reserved
[ 0.260537] system 00:02: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.260555] system 00:02: iomem range 0xfff7f600-0xfff7ffff has been reserved
[ 0.296203] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.296218] pci 0000:00:01.0: IO window: disabled
[ 0.296235] pci 0000:00:01.0: MEM window: 0xfe800000-0xfecfffff
[ 0.296253] pci 0000:00:01.0: PREFETCH window: 0xfd000000-0xfdffffff
[ 0.296274] pci 0000:00:0c.0: CardBus bridge, secondary bus 0000:02
[ 0.296287] pci 0000:00:0c.0: IO window: 0x001400-0x0014ff
[ 0.296303] pci 0000:00:0c.0: IO window: 0x001800-0x0018ff
[ 0.296319] pci 0000:00:0c.0: PREFETCH window: 0xc000000-0xfffffff
[ 0.296335] pci 0000:00:0c.0: MEM window: 0x10000000-0x13ffffff
[ 0.296351] pci 0000:00:0c.1: CardBus bridge, secondary bus 0000:06
[ 0.296364] pci 0000:00:0c.1: IO window: 0x001c00-0x001cff
[ 0.296380] pci 0000:00:0c.1: IO window: 0x002000-0x0020ff
[ 0.296395] pci 0000:00:0c.1: PREFETCH window: 0x14000000-0x17ffffff
[ 0.296411] pci 0000:00:0c.1: MEM window: 0x18000000-0x1bffffff
[ 0.296475] pci 0000:00:01.0: power state changed by ACPI to D0
[ 0.296511] pci 0000:00:01.0: power state changed by ACPI to D0
[ 0.296559] pci 0000:00:0c.0: power state changed by ACPI to D0
[ 0.296596] pci 0000:00:0c.0: power state changed by ACPI to D0
[b][ 0.297661] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 0.297675] PCI: setting IRQ 9 as level-triggered
[ 0.297694] pci 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 0.297714] pci 0000:00:0c.0: setting latency timer to 64
[ 0.297754] pci 0000:00:0c.1: power state changed by ACPI to D0
[ 0.297791] pci 0000:00:0c.1: power state changed by ACPI to D0
[ 0.298702] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [/b]
[ 0.298722] pci 0000:00:0c.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 0.298741] pci 0000:00:0c.1: setting latency timer to 64
[ 0.298760] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.298776] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.298793] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfecfffff]
[ 0.298809] pci_bus 0000:01: resource 2 pref mem [0xfd000000-0xfdffffff]
[ 0.298825] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff]
[ 0.298840] pci_bus 0000:02: resource 1 io: [0x1800-0x18ff]
[ 0.298855] pci_bus 0000:02: resource 2 pref mem [0xc000000-0xfffffff]
[ 0.298871] pci_bus 0000:02: resource 3 mem: [0x10000000-0x13ffffff]
[ 0.298886] pci_bus 0000:06: resource 0 io: [0x1c00-0x1cff]
[ 0.298901] pci_bus 0000:06: resource 1 io: [0x2000-0x20ff]
[ 0.298916] pci_bus 0000:06: resource 2 pref mem [0x14000000-0x17ffffff]
[ 0.298932] pci_bus 0000:06: resource 3 mem: [0x18000000-0x1bffffff]
[ 0.299090] NET: Registered protocol family 2
[ 0.299554] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.301140] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.301356] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.301561] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.301573] TCP reno registered
[ 0.301948] NET: Registered protocol family 1
[ 0.302025] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.302135] pci 0000:00:07.2: power state changed by ACPI to D0
[ 0.302171] pci 0000:00:07.2: power state changed by ACPI to D0
[ 0.303237] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.303260] pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 0.303296] pci 0000:00:07.2: PCI INT D disabled
[ 0.303350] pci 0000:01:00.0: Boot video device
[ 0.303563] Unpacking initramfs...
[ 1.539150] Freeing initrd memory: 8528k freed
[ 1.587368] Simple Boot Flag at 0x35 set to 0x1
[ 1.588427] audit: initializing netlink socket (disabled)
[ 1.588478] type=2000 audit(1367762785.588:1): initialized
[ 1.612260] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.620930] VFS: Disk quotas dquot_6.5.2
[ 1.621293] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.621672] msgmni has been set to 369
[ 1.622639] alg: No test for stdrng (krng)
[ 1.622788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.622804] io scheduler noop registered
[ 1.622815] io scheduler anticipatory registered
[ 1.622826] io scheduler deadline registered
[ 1.623058] io scheduler cfq registered (default)
[ 1.623797] isapnp: Scanning for PnP cards...
[ 1.978076] isapnp: No Plug & Play device found
[ 1.985798] Linux agpgart interface v0.103
[ 1.986142] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 1.988145] agpgart-intel 0000:00:00.0: AGP aperture is 16M @ 0x40000000
[ 1.988463] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.988682] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.989043] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 8250
[ 1.990165] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.990902] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.993881] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.993912] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.994430] mice: PS/2 mouse device common for all mice
[ 1.994641] rtc_cmos 00:04: RTC can wake from S4
[ 1.994824] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.994868] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.994933] cpuidle: using governor ladder
[ 1.994945] cpuidle: using governor menu
[ 1.994967] No iBFT detected.
[ 1.997301] TCP cubic registered
[ 1.998178] NET: Registered protocol family 10
[ 2.002738] Mobile IPv6
[ 2.002753] NET: Registered protocol family 17
[ 2.002831] Using IPI No-Shortcut mode
[ 2.003208] PM: Resume from disk failed.
[ 2.003255] registered taskstats version 1
[ 2.003944] rtc_cmos 00:04: setting system clock to 2013-05-05 14:06:26 UTC (1367762786)
[ 2.004203] Initalizing network drop monitor service
[ 2.004316] Freeing unused kernel memory: 380k freed
[ 2.006034] Write protecting the kernel text: 2512k
[ 2.006143] Write protecting the kernel read-only data: 924k
[ 2.020635] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.096351] udev[46]: starting version 164
[ 2.994875] SCSI subsystem initialized
[ 3.086699] usbcore: registered new interface driver usbfs
[ 3.087475] usbcore: registered new interface driver hub
[ 3.088417] usbcore: registered new device driver usb
[ 3.105737] Floppy drive(s): fd0 is 1.44M
[ 3.126251] FDC 0 is a National Semiconductor PC87306
[ 3.139025] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.139072] ACPI: Thermal Zone [ATF0] (58 C)
[ 3.352844] libata version 3.00 loaded.
[ 3.361657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.405443] firewire_ohci 0000:00:08.0: power state changed by ACPI to D0
[ 3.405488] firewire_ohci 0000:00:08.0: power state changed by ACPI to D0
[ 3.405522] firewire_ohci 0000:00:08.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 3.424699] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.492069] firewire_ohci: Added fw-ohci device 0000:00:08.0, OHCI version 1.0
[ 3.492617] ata_piix 0000:00:07.1: version 2.13
[ 3.494522] scsi0 : ata_piix
[ 3.495287] scsi1 : ata_piix
[ 3.496410] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc90 irq 14
[ 3.496427] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfc98 irq 15
[ 3.496934] uhci_hcd 0000:00:07.2: power state changed by ACPI to D0
[ 3.496972] uhci_hcd 0000:00:07.2: power state changed by ACPI to D0
[ 3.497006] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 3.497041] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 3.497150] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 3.497218] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000fca0
[ 3.497416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.497432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.497446] usb usb1: Product: UHCI Host Controller
[ 3.497459] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 3.497471] usb usb1: SerialNumber: 0000:00:07.2
[ 3.498200] usb usb1: configuration #1 chosen from 1 choice
[ 3.498540] hub 1-0:1.0: USB hub found
[ 3.498588] hub 1-0:1.0: 2 ports detected
[ 3.664520] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2202, 1021, max UDMA/33
[ 3.680468] ata2.00: configured for UDMA/33
[ 3.808083] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 3.976368] usb 1-1: New USB device found, idVendor=0461, idProduct=4d81
[ 3.976386] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.976400] usb 1-1: Product: USB Optical Mouse
[ 3.977071] usb 1-1: configuration #1 chosen from 1 choice
[ 3.992371] firewire_core: created device fw0: GUID 08004603002bb8f8, S400
[ 4.088075] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 4.238349] usb 1-2: New USB device found, idVendor=05e3, idProduct=0702
[ 4.238366] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.238381] usb 1-2: Product: USB TO IDE
[ 4.239029] usb 1-2: configuration #1 chosen from 1 choice
[ 4.273522] ata1.00: ATA-4: IBM-DARA-212000, AR4OA51A, max UDMA/66
[ 4.273540] ata1.00: 23579136 sectors, multi 16: LBA
[ 4.316410] ata1.00: configured for UDMA/33
[ 4.316872] scsi 0:0:0:0: Direct-Access ATA IBM-DARA-212000 AR4O PQ: 0 ANSI: 5
[ 4.320086] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2202 1021 PQ: 0 ANSI: 5
[ 4.510704] Initializing USB Mass Storage driver...
[ 4.520182] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.521080] usbcore: registered new interface driver usb-storage
[ 4.521095] USB Mass Storage support registered.
[ 4.521886] usb-storage: device found at 3
[ 4.521897] usb-storage: waiting for device to settle before scanning
[ 4.544637] usbcore: registered new interface driver hiddev
[ 4.585080] input: USB Optical Mouse as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/input/input1
[ 4.585820] generic-usb 0003:0461:4D81.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:07.2-1/input0
[ 4.585953] usbcore: registered new interface driver usbhid
[ 4.586738] usbhid: v2.6:USB HID core driver
[ 4.593792] sd 0:0:0:0: [sda] 23579136 512-byte logical blocks: (12.0 GB/11.2 GiB)
[ 4.594149] sd 0:0:0:0: [sda] Write Protect is off
[ 4.594166] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.594318] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.595133] sda: sda1 sda2 <sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 4.632467] Uniform CD-ROM driver Revision: 3.20
[ 4.632952] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.654530] sda5 >
[ 4.657684] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.740285] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.742465] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.325157] PM: Starting manual resume from disk
[ 5.325178] PM: Resume from partition 8:5
[ 5.325187] PM: Checking hibernation image.
[ 5.325648] PM: Error -22 checking image file
[ 5.325659] PM: Resume from disk failed.
[ 5.481084] kjournald starting. Commit interval 5 seconds
[ 5.481131] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.340495] udev[272]: starting version 164
[ 9.522167] usb-storage: device scan complete
[ 9.529104] scsi 2:0:0:0: Direct-Access SAMSUNG MP0603H 0811 PQ: 0 ANSI: 0
[ 9.533496] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.540236] sd 2:0:0:0: [sdb] 117304992 512-byte logical blocks: (60.0 GB/55.9 GiB)
[ 9.548101] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 9.548121] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.561999] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 9.562020] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.562128] sdb: sdb1 sdb2
[ 10.063062] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 10.063081] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 10.063183] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 10.942681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.109985] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2
[ 11.126755] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3
[ 11.607618] Marking TSC unstable due to TSC halts in idle
[ 11.613186] processor LNXCPU:00: registered as cooling_device0
[ 11.614565] Switching to clocksource acpi_pm
[ 11.687283] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.743159] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 11.743600] ACPI: Power Button [PWRB]
[ 11.822153] ACPI: Battery Slot [BAT1] (battery present)
[ 11.824461] ACPI: AC Adapter [ACAD] (on-line)
[ 11.828284] ACPI: Battery Slot [BAT2] (battery absent)
[ 12.101607] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x1040, revision 0
[ 12.158112] yenta_cardbus 0000:00:0c.0: CardBus bridge found [104d:8073]
[ 12.185885] sony-laptop: Sony Programmable IO Control Driver v0.6.
[ 12.185913] sony-laptop: detected Type1 model
[ 12.188974] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0d/SNY6001:00/input/input5
[ 12.191442] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[ 12.194822] sony-laptop: device allocated minor is 58
[ 12.235907] sony-laptop: Sony Notebook Control Driver v0.6.
[ 12.285303] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0098, PCI irq 9
[ 12.285321] yenta_cardbus 0000:00:0c.0: Socket status: 30000410
[ 12.286418] yenta_cardbus 0000:00:0c.1: CardBus bridge found [104d:8073]
[ 12.415550] yenta_cardbus 0000:00:0c.1: ISA IRQ mask 0x0898, PCI irq 9
[ 12.415568] yenta_cardbus 0000:00:0c.1: Socket status: 30000810
[ 12.449270] NET: Registered protocol family 23
[ 12.562751] parport_pc 00:0c: reported by Plug and Play ACPI
[ 12.562845] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 12.964107] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 12.967039] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.068113] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 13.196311] nsc-ircc, chip->init
[ 13.196325] nsc-ircc, Found chip at base=0x398
[ 13.196365] nsc-ircc, driver loaded (Dag Brattli)
[ 13.197352] nsc_ircc_open(), can't get iobase of 0x3e8
[ 13.197390] nsc-ircc, Found chip at base=0x398
[ 13.197429] nsc-ircc, driver loaded (Dag Brattli)
[ 13.197446] nsc_ircc_open(), can't get iobase of 0x3e8
[ 13.204054] nsc-ircc 00:0b: disabled
[ 13.755732] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 13.758557] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 13.760866] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 13.761924] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 13.762871] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 13.764272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 13.765332] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 13.766280] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 13.767860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 13.769228] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 13.770279] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 13.778874] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0f00000-0xa0ffffff
[ 13.790943] pcmcia 1.0: pcmcia: registering new device pcmcia1.0
[ 13.795607] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 14.356905] Uniform Multi-Platform E-IDE driver
[ 14.464184] eth0: Asix AX88790: io 0x300, irq 3, hw_addr 00:40:f4:3f:6d:69
[ 14.596235] Probing IDE interface ide0...
[ 14.884406] hda: TRANSCEND, CFA DISK drive
[ 15.017709] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 15.017734] Yamaha DS-1 PCI 0000:00:09.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 15.020107] Yamaha DS-1 PCI 0000:00:09.0: firmware: requesting yamaha/ds1_dsp.fw
[ 15.186749] firmware request failed: -2
[ 15.186868] Yamaha DS-1 PCI 0000:00:09.0: PCI INT A disabled
[ 15.186915] Yamaha DS-1 PCI: probe of 0000:00:09.0 failed with error -2
[ 15.564309] ide0 at 0x100-0x107,0x10e on irq 4
[ 15.564417] isa bounce pool size: 16 pages
[ 15.564580] ide-cs: hda: Vpp = 0.0
[ 15.734832] ide-gd driver 1.18
[ 15.734984] hda: max request size: 128KiB
[ 15.735001] hda: 1957536 sectors (1002 MB) w/1KiB Cache, CHS=1942/16/63
[ 15.735375] hda: hda1
[ 17.122006] Adding 243704k swap on /dev/sda5. Priority:-1 extents:1 across:243704k
[ 17.669377] EXT3 FS on sda1, internal journal
[ 18.205209] loop: module loaded
[ 20.864789] RPC: Registered udp transport module.
[ 20.864805] RPC: Registered tcp transport module.
[ 20.864816] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.437588] Slow work thread pool: Starting up
[ 21.437811] Slow work thread pool: Ready
[ 21.438127] FS-Cache: Loaded
[ 21.788839] FS-Cache: Netfs 'nfs' registered for caching
[ 22.197095] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 23.124904] eth0: found link beat
[ 23.124919] eth0: autonegotiation complete: 100baseT-FD selected
[ 23.126169] fuse init (API version 7.13)
[ 26.241235] svc: failed to register lockdv1 RPC service (errno 97).
[ 26.247969] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 26.329576] NFSD: starting 90-second grace period
[ 34.039167] lp0: using parport0 (interrupt-driven).
[ 34.075355] ppdev: user-space parallel port driver
[ 39.323611] ttyS2: LSR safety check engaged!
[ 115.515188] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 116.401231] EXT4-fs (sdb2): mounted filesystem with ordered data mode