Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 25-11-2017 14:24:17

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Freezes aléatoires sur emachines e640g

Bonjour smile
Je viens d'installer Debian Stretch Xfce (DFlinux) sur un PC emachines e640g et celui-ci me fait des freezes complets aléatoires : tout se gèle. Souris, clavier et impossible de passer en console. Obligé d'éteindre de force. Il peut tenir plusieurs heures sans freeze comme bloquer 2 minutes apèrs mise en route.

Les infos du PC :

lshw


debian                      
    description: Ordinateur Bloc-notes
    produit: eMachines G640
    fabriquant: eMachines
    version: V1.07
    numéro de série: LXN9V02063024B10002200
    bits: 64 bits
    fonctionnalités: smbios-2.6 dmi-2.6 smp vsyscall32
    configuration: boot=oem-specific chassis=notebook uuid=AF7C0F00-7866-11DF-BC4C-DF2DEB3895AD
  *-core
       description: Motherboard
       identifiant matériel: 0
     *-firmware
          description: BIOS
          fabriquant: Phoenix Technologies LTD
          identifiant matériel: 0
          version: V1.07
          date: 05/10/2010
          taille: 117KiB
          capacité: 1984KiB
          fonctionnalités: pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
     *-board NON-RÉCLAMÉ
          description: Carte mère
          produit: eMachines G640
          fabriquant: eMachines
          identifiant matériel: 2
          version: V1.07
          numéro de série: LXN9V02063024B10002200
          emplacement: Not Applicable
     *-cpu
          description: CPU
          produit: AMD Athlon(tm) II P320 Dual-Core Processor
          fabriquant: Advanced Micro Devices [AMD]
          identifiant matériel: 4
          information bus: cpu@0
          version: New Processor Technology
          emplacement: Socket S1G4
          taille: 2100MHz
          capacité: 2100MHz
          bits: 64 bits
          horloge: 200MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid eagerfpu pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a 3dnowprefetch osvw ibs skinit wdt nodeid_msr hw_pstate vmmcall npt lbrv svm_lock nrip_save cpufreq
          configuration: cores=2 enabledcores=2 threads=2
        *-cache:0
             description: L1 cache
             identifiant matériel: 5
             emplacement: L1 Cache
             taille: 256KiB
             capacité: 256KiB
             horloge: 1GHz (1.0ns)
             fonctionnalités: pipeline-burst internal write-back unified
             configuration: level=1
        *-cache:1
             description: L2 cache
             identifiant matériel: 6
             emplacement: L2 Cache
             taille: 1MiB
             capacité: 1MiB
             horloge: 1GHz (1.0ns)
             fonctionnalités: pipeline-burst internal write-back unified
             configuration: level=2
     *-memory
          description: Mémoire Système
          identifiant matériel: d
          emplacement: Carte mère
          taille: 4GiB
          fonctionnalités: ecc
          configuration: errordetection=ecc
        *-bank:0
             description: DIMM DDR3 Synchrone 533 MHz (1,9 ns)
             produit: HMT125S6BFR8C-G7
             fabriquant: Hynix Semiconductor (Hyundai Electronics)
             identifiant matériel: 0
             numéro de série: 5B41BCD5
             emplacement: S1
             taille: 2GiB
             bits: 64 bits
             horloge: 533MHz (1.9ns)
        *-bank:1
             description: DIMM DDR3 Synchrone 533 MHz (1,9 ns)
             produit: HMT125S6BFR8C-G7
             fabriquant: Hynix Semiconductor (Hyundai Electronics)
             identifiant matériel: 1
             numéro de série: 5B61BCAE
             emplacement: S2
             taille: 2GiB
             bits: 64 bits
             horloge: 533MHz (1.9ns)
     *-pci:0
          description: Host bridge
          produit: RS880 Host Bridge
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 00
          bits: 32 bits
          horloge: 66MHz
        *-pci:0
             description: PCI bridge
             produit: RS780 PCI to PCI bridge (ext gfx port 0)
             fabriquant: Advanced Micro Devices, Inc. [AMD]
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:24 portE/S:9000(taille=4096) mémoire:d0000000-d00fffff portE/S:c0000000(taille=268435456)
           *-display
                description: VGA compatible controller
                produit: Park [Mobility Radeon HD 5430/5450/5470]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                version: 00
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
                configuration: driver=radeon latency=0
                ressources: irq:29 mémoire:c0000000-cfffffff mémoire:d0000000-d001ffff portE/S:9000(taille=256) mémoire:c0000-dffff
           *-multimedia
                description: Audio device
                produit: Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0.1
                information bus: pci@0000:02:00.1
                version: 00
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi bus_master cap_list
                configuration: driver=snd_hda_intel latency=0
                ressources: irq:28 mémoire:d0020000-d0023fff
        *-pci:1
             description: PCI bridge
             produit: RS780/RS880 PCI to PCI bridge (PCIE port 0)
             fabriquant: Advanced Micro Devices, Inc. [AMD]
             identifiant matériel: 4
             information bus: pci@0000:00:04.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:25 mémoire:d0100000-d01fffff
           *-network
                description: Ethernet interface
                produit: NetLink BCM57780 Gigabit Ethernet PCIe
                fabriquant: Broadcom Limited
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: enp3s0
                version: 01
                numéro de série: 00:26:2d:ae:db:f3
                taille: 10Mbit/s
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s
                ressources: irq:30 mémoire:d0100000-d010ffff
        *-pci:2
             description: PCI bridge
             produit: RS780/RS880 PCI to PCI bridge (PCIE port 1)
             fabriquant: Advanced Micro Devices, Inc. [AMD]
             identifiant matériel: 5
             information bus: pci@0000:00:05.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:26 mémoire:d0200000-d02fffff
           *-network
                description: Interface réseau sans fil
                produit: AR928X Wireless Network Adapter (PCI-Express)
                fabriquant: Qualcomm Atheros
                identifiant matériel: 0
                information bus: pci@0000:06:00.0
                nom logique: wlp6s0
                version: 01
                numéro de série: 78:e4:00:03:31:82
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=ath9k driverversion=4.9.0-4-amd64 firmware=N/A ip=192.168.1.30 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                ressources: irq:17 mémoire:d0200000-d020ffff
        *-storage
             description: SATA controller
             produit: SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 11
             information bus: pci@0000:00:11.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage msi ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=64
             ressources: irq:27 portE/S:8440(taille=8) portE/S:8430(taille=4) portE/S:8420(taille=8) portE/S:8410(taille=4) portE/S:8400(taille=16) mémoire:d0506800-d0506bff
        *-usb:0
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 12
             information bus: pci@0000:00:12.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=64
             ressources: irq:18 mémoire:d0504000-d0504fff
           *-usbhost
                produit: OHCI PCI host controller
                fabriquant: Linux 4.9.0-4-amd64 ohci_hcd
                identifiant matériel: 1
                information bus: usb@3
                nom logique: usb3
                version: 4.09
                fonctionnalités: usb-1.10
                configuration: driver=hub slots=5 speed=12Mbit/s
        *-usb:1
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 12.2
             information bus: pci@0000:00:12.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=64
             ressources: irq:17 mémoire:d0506000-d05060ff
           *-usbhost
                produit: EHCI Host Controller
                fabriquant: Linux 4.9.0-4-amd64 ehci_hcd
                identifiant matériel: 1
                information bus: usb@1
                nom logique: usb1
                version: 4.09
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=5 speed=480Mbit/s
              *-usb:0 NON-RÉCLAMÉ
                   description: Périphérique USB générique
                   produit: SAMSUNG_Android
                   fabriquant: SAMSUNG
                   identifiant matériel: 1
                   information bus: usb@1:1
                   version: 2.28
                   numéro de série: b0b3a706
                   fonctionnalités: usb-2.00
                   configuration: maxpower=96mA speed=480Mbit/s
              *-usb:1
                   description: Périphérique de stockage de masse
                   produit: Mass Storage Device
                   fabriquant: Generic
                   identifiant matériel: 5
                   information bus: usb@1:5
                   nom logique: scsi4
                   version: 1.00
                   numéro de série: 058F63666433
                   fonctionnalités: usb-2.00 scsi emulated
                   configuration: driver=usb-storage maxpower=100mA speed=480Mbit/s
                 *-disk
                      description: SCSI Disk
                      produit: Card  Reader
                      fabriquant: Multiple
                      identifiant matériel: 0.0.0
                      information bus: scsi@4:0.0.0
                      nom logique: /dev/sdb
                      version: 1.00
                      taille: 14GiB (15GB)
                      fonctionnalités: removable
                      configuration: logicalsectorsize=512 sectorsize=512
                    *-medium
                         identifiant matériel: 0
                         nom logique: /dev/sdb
                         taille: 14GiB (15GB)
                         fonctionnalités: partitioned partitioned:dos
                       *-volume
                            description: Windows FAT volume
                            identifiant matériel: 1
                            nom logique: /dev/sdb1
                            version: FAT32
                            numéro de série: 29f7-3626
                            taille: 14GiB
                            capacité: 14GiB
                            fonctionnalités: primary fat initialized
                            configuration: FATs=2 filesystem=fat
        *-usb:2
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 13
             information bus: pci@0000:00:13.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=64
             ressources: irq:18 mémoire:d0505000-d0505fff
           *-usbhost
                produit: OHCI PCI host controller
                fabriquant: Linux 4.9.0-4-amd64 ohci_hcd
                identifiant matériel: 1
                information bus: usb@4
                nom logique: usb4
                version: 4.09
                fonctionnalités: usb-1.10
                configuration: driver=hub slots=5 speed=12Mbit/s
        *-usb:3
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 13.2
             information bus: pci@0000:00:13.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=64
             ressources: irq:17 mémoire:d0506400-d05064ff
           *-usbhost
                produit: EHCI Host Controller
                fabriquant: Linux 4.9.0-4-amd64 ehci_hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 4.09
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=5 speed=480Mbit/s
              *-usb
                   description: Vidéo
                   produit: 1.3M WebCam
                   fabriquant: Suyin
                   identifiant matériel: 5
                   information bus: usb@2:5
                   version: 2.15
                   numéro de série: HF1315-S32B-OV01-VA-R02.01.05
                   fonctionnalités: usb-2.00
                   configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: SBx00 SMBus Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 41
             bits: 32 bits
             horloge: 66MHz
             configuration: latency=0
        *-ide
             description: IDE interface
             produit: SB7x0/SB8x0/SB9x0 IDE Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.1
             information bus: pci@0000:00:14.1
             version: 40
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ide bus_master
             configuration: driver=pata_atiixp latency=64
             ressources: irq:17 portE/S:1f0(taille=8) portE/S:3f6 portE/S:170(taille=8) portE/S:376 portE/S:8450(taille=16)
        *-multimedia
             description: Audio device
             produit: SBx00 Azalia (Intel HDA)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 40
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration: driver=snd_hda_intel latency=64
             ressources: irq:16 mémoire:d0500000-d0503fff
        *-isa
             description: ISA bridge
             produit: SB7x0/SB8x0/SB9x0 LPC host controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.3
             information bus: pci@0000:00:14.3
             version: 40
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: isa bus_master
             configuration: latency=0
        *-pci:3
             description: PCI bridge
             produit: SBx00 PCI to PCI Bridge
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.4
             information bus: pci@0000:00:14.4
             version: 40
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pci subtractive_decode bus_master
     *-pci:1
          description: Host bridge
          produit: Family 10h Processor HyperTransport Configuration
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 101
          information bus: pci@0000:00:18.0
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:2
          description: Host bridge
          produit: Family 10h Processor Address Map
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 102
          information bus: pci@0000:00:18.1
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:3
          description: Host bridge
          produit: Family 10h Processor DRAM Controller
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 103
          information bus: pci@0000:00:18.2
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:4
          description: Host bridge
          produit: Family 10h Processor Miscellaneous Control
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 104
          information bus: pci@0000:00:18.3
          version: 00
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=k10temp
          ressources: irq:0
     *-pci:5
          description: Host bridge
          produit: Family 10h Processor Link Control
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 105
          information bus: pci@0000:00:18.4
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-scsi:0
          identifiant matériel: 1
          nom logique: scsi0
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: WDC WD2500BEVT-2
             fabriquant: Western Digital
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/sda
             version: 1A01
             numéro de série: WD-WX11A50Y5991
             taille: 232GiB (250GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=cd4da36f
           *-volume:0
                description: EXT4 volume
                fabriquant: Linux
                identifiant matériel: 1
                information bus: scsi@0:0.0.0,1
                nom logique: /dev/sda1
                nom logique: /
                version: 1.0
                numéro de série: eec3a028-24c8-4b47-8a97-6d0fb1ea3723
                taille: 228GiB
                capacité: 228GiB
                fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
                configuration: created=2017-11-22 21:25:10 filesystem=ext4 lastmountpoint=/ modified=2017-11-25 13:13:16 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2017-11-25 13:05:56 state=mounted
           *-volume:1
                description: Extended partition
                identifiant matériel: 2
                information bus: scsi@0:0.0.0,2
                nom logique: /dev/sda2
                taille: 4093MiB
                capacité: 4093MiB
                fonctionnalités: primary extended partitioned partitioned:extended
              *-logicalvolume
                   description: Linux swap volume
                   identifiant matériel: 5
                   nom logique: /dev/sda5
                   version: 1
                   numéro de série: fb012ae3-1933-43e9-b615-4e28af2023ac
                   taille: 4093MiB
                   capacité: 4093MiB
                   fonctionnalités: nofs swap initialized
                   configuration: filesystem=swap pagesize=4096
     *-scsi:1
          identifiant matériel: 3
          nom logique: scsi1
          fonctionnalités: emulated
        *-cdrom
             description: DVD-RAM writer
             produit: DVD RW AD-7585H
             fabriquant: Optiarc
             identifiant matériel: 0.0.0
             information bus: scsi@1:0.0.0
             nom logique: /dev/cdrom
             nom logique: /dev/cdrw
             nom logique: /dev/dvd
             nom logique: /dev/dvdrw
             nom logique: /dev/sr0
             version: KX04
             fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
 



Dites-moi les autres infos qu'il vous faudra. Un grand merci d'avance ! smile

Dernière modification par Caribou22 (04-12-2017 09:39:50)

Hors ligne

#2 26-11-2017 15:58:09

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-3-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : Freezes aléatoires sur emachines e640g

Bonjour
regarde si tu as pas des messages d'erreur

dmseg



Sinon affiche les secondes sur ton horloge de bureau comme ça tu verras l'heure la la seconde pres quand le PC freeze et tu pourras consulter le fichier syslog

cat /var/log/syslog

Dernière modification par Croutons (26-11-2017 15:58:49)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#3 27-11-2017 23:02:16

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

Bonsoir smile

L'ordi a crashé ce soir à 21h54 et 32 secondes wink

dmesg


[    0.000000] Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=eec3a028-24c8-4b47-8a97-6d0fb1ea3723 ro initrd=/install/gtk/initrd.gz quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfe8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfe90000-0x00000000bfeacfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfead000-0x00000000bfeaefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfeaf000-0x00000000bfefefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: eMachines       eMachines G640                 /eMachines G640                 , BIOS V1.07           05/10/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbfe90 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f8080-0x000f808f] mapped at [ffff92ae400f8080]
[    0.000000] Base memory trampoline at [ffff92ae40097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x7f92f000, 0x7f92ffff] PGTABLE
[    0.000000] BRK [0x7f930000, 0x7f930fff] PGTABLE
[    0.000000] BRK [0x7f931000, 0x7f931fff] PGTABLE
[    0.000000] BRK [0x7f932000, 0x7f932fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35267000-0x3692afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8000 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x00000000BFE9C5B3 00007C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[    0.000000] ACPI: FACP 0x00000000BFEAC0B5 0000F4 (v03 AMD    GUAM     06040000 AMD  000F4240)
[    0.000000] ACPI: DSDT 0x00000000BFE9C62F 00FA86 (v01 ATI    SB800    06040000 MSFT 03000001)
[    0.000000] ACPI: FACS 0x00000000BFEAEFC0 000040
[    0.000000] ACPI: FACS 0x00000000BFEAEFC0 000040
[    0.000000] ACPI: SLIC 0x00000000BFEAC21D 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[    0.000000] ACPI: EINJ 0x00000000BFEAC393 0001B0 (v01 PTL    WHEAPTL  06040000 PTL  00000001)
[    0.000000] ACPI: HEST 0x00000000BFEAC543 0002E4 (v01 PTL    WHEAPTL  06040000 PTL  00000001)
[    0.000000] ACPI: BERT 0x00000000BFEAC827 000030 (v01 PTL    WHEAPTL  06040000 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BFEAC857 0000E1 (v01 wheaos wheaosc  06040000 INTL 20050624)
[    0.000000] ACPI: ERST 0x00000000BFEAC938 000270 (v01 PTL    WHEAPTL  06040000 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BFEACBA8 000386 (v01 AMD    POWERNOW 06040000 AMD  00000001)
[    0.000000] ACPI: APIC 0x00000000BFEACF2E 00005E (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 0x00000000BFEACF8C 00003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 0x00000000BFEACFC8 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfe8ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048108
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12219 pages used for memmap
[    0.000000]   DMA32 zone: 781968 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[    0.000000] ACPI: BIOS IRQ0 pin2 override: forcing polarity to high active.
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfe90000-0xbfeacfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfead000-0xbfeaefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfeaf000-0xbfefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfeff000-0xbfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff92af7fc00000 s103512 r8192 d31656 u1048576
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031708
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=eec3a028-24c8-4b47-8a97-6d0fb1ea3723 ro initrd=/install/gtk/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x5e000000-0x5fffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 3956048K/4192432K available (6196K kernel code, 1137K rwdata, 2856K rodata, 1396K init, 688K bss, 236384K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2094.698 MHz processor
[    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.39 BogoMIPS (lpj=8378792)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000051] ACPI: Core revision 20160831
[    0.011766] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.011831] Security Framework initialized
[    0.011833] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011839] AppArmor: AppArmor disabled by boot time parameter
[    0.012150] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014178] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014184] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014532] CPU: Physical Processor ID: 0
[    0.014533] CPU: Processor Core ID: 0
[    0.014535] mce: CPU supports 6 MCE banks
[    0.014541] LVT offset 0 assigned for vector 0xf9
[    0.014546] process: using AMD E400 aware idle routine
[    0.014548] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.014549] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.016567] Freeing SMP alternatives memory: 24K
[    0.629368] ftrace: allocating 25191 entries in 99 pages
[    0.640106] smpboot: Max logical packages: 1
[    0.640475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.787379] smpboot: CPU0: AMD Athlon(tm) II P320 Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3)
[    0.787385] Performance Events: AMD PMU driver.
[    0.787389] ... version:                0
[    0.787390] ... bit width:              48
[    0.787390] ... generic registers:      4
[    0.787391] ... value mask:             0000ffffffffffff
[    0.787392] ... max period:             00007fffffffffff
[    0.787392] ... fixed-purpose events:   0
[    0.787393] ... event mask:             000000000000000f
[    0.788013] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.788170] x86: Booting SMP configuration:
[    0.788172] .... node  #0, CPUs:      #1
[    0.869406] process: System has AMD C1E enabled
[    0.869418] process: Switch to broadcast mode on CPU0
[    0.869422] process: Switch to broadcast mode on CPU1
[    0.869529] x86: Booted up 1 node, 2 CPUs
[    0.869532] smpboot: Total of 2 processors activated (8378.87 BogoMIPS)
[    0.870253] devtmpfs: initialized
[    0.870353] x86/mm: Memory block size: 128MB
[    0.874869] PM: Registering ACPI NVS region [mem 0xbfead000-0xbfeaefff] (8192 bytes)
[    0.874932] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.874941] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.874988] pinctrl core: initialized pinctrl subsystem
[    0.877037] NET: Registered protocol family 16
[    0.889480] cpuidle: using governor ladder
[    0.905480] cpuidle: using governor menu
[    0.905488] node 0 link 0: io port [1000, ffff]
[    0.905490] TOM: 00000000c0000000 aka 3072M
[    0.905492] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.905494] node 0 link 0: mmio [a0000, bffff]
[    0.905496] node 0 link 0: mmio [c0000000, dfffffff]
[    0.905498] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.905500] node 0 link 0: mmio [f0000000, ff7fffff]
[    0.905501] TOM2: 0000000140000000 aka 5120M
[    0.905503] bus: [bus 00-1f] on node 0 link 0
[    0.905504] bus: 00 [io  0x0000-0xffff]
[    0.905505] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.905506] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.905507] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.905508] bus: 00 [mem 0x140000000-0xfcffffffff]
[    0.905569] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.905571] ACPI: bus type PCI registered
[    0.905573] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.905678] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
[    0.905681] PCI: not using MMCONFIG
[    0.905682] PCI: Using configuration type 1 for base access
[    0.905682] PCI: Using configuration type 1 for extended access
[    0.905921] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.905922] mtrr: probably your BIOS does not setup all CPUs.
[    0.905922] mtrr: corrected configuration.
[    0.921751] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.921752] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.922125] ACPI: Added _OSI(Module Device)
[    0.922127] ACPI: Added _OSI(Processor Device)
[    0.922128] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.922129] ACPI: Added _OSI(Processor Aggregator Device)
[    0.926548] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.926881] ACPI: Dynamic OEM Table Load:
[    0.926887] ACPI: OEMN 0xFFFF92AF7A483680 000024 (v01 AMD    NAHP     00000001 MSFT 03000001)
[    0.927537] ACPI : EC: EC started
[    0.927538] ACPI : EC: interrupt blocked
[    0.957443] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.957446] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.957447] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[    0.957448] ACPI: Interpreter enabled
[    0.957468] ACPI: (supports S0 S3 S4 S5)
[    0.957469] ACPI: Using IOAPIC for interrupt routing
[    0.957627] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
[    0.958109] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] not reserved in ACPI motherboard resources
[    0.958110] PCI: not using MMCONFIG
[    0.958146] [Firmware Warn]: HEST: Duplicated hardware error source ID: 9.
[    0.958167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.974091] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.974097] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.974449] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.974450] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.975459] PCI host bridge to bus 0000:00
[    0.975462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.975464] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff window]
[    0.975465] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff window]
[    0.975467] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff window]
[    0.975468] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff window]
[    0.975470] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff window]
[    0.975471] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff window]
[    0.975473] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.975475] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[    0.975476] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.975478] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.975480] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.975491] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[    0.975629] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[    0.975672] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.975734] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.975789] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[    0.975830] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.975889] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.975935] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[    0.975975] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.976034] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.976132] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.976150] pci 0000:00:11.0: reg 0x10: [io  0x8440-0x8447]
[    0.976160] pci 0000:00:11.0: reg 0x14: [io  0x8430-0x8433]
[    0.976169] pci 0000:00:11.0: reg 0x18: [io  0x8420-0x8427]
[    0.976178] pci 0000:00:11.0: reg 0x1c: [io  0x8410-0x8413]
[    0.976187] pci 0000:00:11.0: reg 0x20: [io  0x8400-0x840f]
[    0.976196] pci 0000:00:11.0: reg 0x24: [mem 0xd0506800-0xd0506bff]
[    0.976336] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.976349] pci 0000:00:12.0: reg 0x10: [mem 0xd0504000-0xd0504fff]
[    0.976460] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.976516] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.976532] pci 0000:00:12.2: reg 0x10: [mem 0xd0506000-0xd05060ff]
[    0.976611] pci 0000:00:12.2: supports D1 D2
[    0.976612] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.976670] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.976729] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.976743] pci 0000:00:13.0: reg 0x10: [mem 0xd0505000-0xd0505fff]
[    0.976853] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.976909] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.976925] pci 0000:00:13.2: reg 0x10: [mem 0xd0506400-0xd05064ff]
[    0.977004] pci 0000:00:13.2: supports D1 D2
[    0.977005] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.977063] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.977120] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.977276] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.977290] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.977299] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.977308] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.977317] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.977326] pci 0000:00:14.1: reg 0x20: [io  0x8450-0x845f]
[    0.977346] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.977347] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.977349] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.977350] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.977458] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.977478] pci 0000:00:14.2: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[    0.977545] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.977602] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.977652] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.977814] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.977904] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.977958] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.978052] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.978142] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.978232] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.978325] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.978486] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
[    0.978501] pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.978511] pci 0000:02:00.0: reg 0x18: [mem 0xd0000000-0xd001ffff 64bit]
[    0.978518] pci 0000:02:00.0: reg 0x20: [io  0x9000-0x90ff]
[    0.978530] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.978565] pci 0000:02:00.0: supports D1 D2
[    0.978628] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[    0.978643] pci 0000:02:00.1: reg 0x10: [mem 0xd0020000-0xd0023fff 64bit]
[    0.978703] pci 0000:02:00.1: supports D1 D2
[    0.989490] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.989496] pci 0000:00:02.0:   bridge window [io  0x9000-0x9fff]
[    0.989498] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.989502] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.989610] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[    0.989632] pci 0000:03:00.0: reg 0x10: [mem 0xd0100000-0xd010ffff 64bit]
[    0.989749] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    1.037491] pci 0000:00:04.0: PCI bridge to [bus 03]
[    1.037497] pci 0000:00:04.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    1.037595] pci 0000:06:00.0: [168c:002a] type 00 class 0x028000
[    1.037617] pci 0000:06:00.0: reg 0x10: [mem 0xd0200000-0xd020ffff 64bit]
[    1.037726] pci 0000:06:00.0: supports D1
[    1.037728] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    1.053489] pci 0000:00:05.0: PCI bridge to [bus 06]
[    1.053495] pci 0000:00:05.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    1.053607] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[    1.053616] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    1.053618] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d5fff window] (subtractive decode)
[    1.053620] pci 0000:00:14.4:   bridge window [mem 0x000d6000-0x000d7fff window] (subtractive decode)
[    1.053621] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000d9fff window] (subtractive decode)
[    1.053623] pci 0000:00:14.4:   bridge window [mem 0x000da000-0x000dbfff window] (subtractive decode)
[    1.053625] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000ddfff window] (subtractive decode)
[    1.053627] pci 0000:00:14.4:   bridge window [mem 0x000de000-0x000dffff window] (subtractive decode)
[    1.053628] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    1.053630] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[    1.053634] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    1.053636] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    1.054026] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[    1.054105] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[    1.054187] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[    1.054267] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[    1.054334] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[    1.054387] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[    1.054441] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[    1.054495] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[    1.055074] ACPI : EC: interrupt unblocked
[    1.055082] ACPI : EC: event unblocked
[    1.055088] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.055090] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[    1.055279] vgaarb: setting as boot device: PCI:0000:02:00.0
[    1.055281] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.055283] vgaarb: loaded
[    1.055284] vgaarb: bridge control possible 0000:02:00.0
[    1.055417] PCI: Using ACPI for IRQ routing
[    1.055420] PCI: pci_cache_line_size set to 64 bytes
[    1.055488] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    1.055490] e820: reserve RAM buffer [mem 0xbfe90000-0xbfffffff]
[    1.055707] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.055711] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    1.057770] clocksource: Switched to clocksource hpet
[    1.066909] VFS: Disk quotas dquot_6.6.0
[    1.066941] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.067063] pnp: PnP ACPI init
[    1.067229] system 00:00: [io  0x0f50-0x0f51] has been reserved
[    1.067232] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.067234] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.067238] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.067656] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.067738] system 00:02: [io  0x0220-0x022f] has been reserved
[    1.067740] system 00:02: [io  0x040b] has been reserved
[    1.067742] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    1.067744] system 00:02: [io  0x04d6] has been reserved
[    1.067745] system 00:02: [io  0x0530-0x0537] has been reserved
[    1.067747] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    1.067750] system 00:02: [io  0x0c14] has been reserved
[    1.067751] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    1.067753] system 00:02: [io  0x0c6c] has been reserved
[    1.067755] system 00:02: [io  0x0c6f] has been reserved
[    1.067757] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    1.067758] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    1.067760] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    1.067762] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    1.067764] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    1.067766] system 00:02: [io  0x8000-0x805f] has been reserved
[    1.067768] system 00:02: [io  0x8100-0x81ff window] has been reserved
[    1.067770] system 00:02: [io  0x8200-0x82ff window] has been reserved
[    1.067772] system 00:02: [io  0x0f40-0x0f47] has been reserved
[    1.067774] system 00:02: [io  0x087f] has been reserved
[    1.067776] system 00:02: [mem 0xff800000-0xff800fff] has been reserved
[    1.067778] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.067912] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.067914] system 00:03: [mem 0xffe00000-0xffffffff] could not be reserved
[    1.067916] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[    1.067918] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    1.067920] system 00:03: [mem 0xfed61000-0xfed613ff] has been reserved
[    1.067922] system 00:03: [mem 0xfed80000-0xfed80fff] has been reserved
[    1.067924] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.068019] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.068050] pnp 00:05: Plug and Play ACPI device, IDs SYN1b37 SYN1b00 SYN0002 PNP0f13 (active)
[    1.068089] pnp: PnP ACPI: found 6 devices
[    1.075946] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.075983] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0040000-0xd005ffff pref]
[    1.075986] pci 0000:00:02.0: PCI bridge to [bus 02]
[    1.075988] pci 0000:00:02.0:   bridge window [io  0x9000-0x9fff]
[    1.075991] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    1.075994] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.075997] pci 0000:00:04.0: PCI bridge to [bus 03]
[    1.076000] pci 0000:00:04.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    1.076004] pci 0000:00:05.0: PCI bridge to [bus 06]
[    1.076007] pci 0000:00:05.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    1.076011] pci 0000:00:14.4: PCI bridge to [bus 07]
[    1.076029] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
[    1.076031] pci_bus 0000:00: resource 5 [mem 0x000d4000-0x000d5fff window]
[    1.076033] pci_bus 0000:00: resource 6 [mem 0x000d6000-0x000d7fff window]
[    1.076034] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000d9fff window]
[    1.076036] pci_bus 0000:00: resource 8 [mem 0x000da000-0x000dbfff window]
[    1.076037] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000ddfff window]
[    1.076039] pci_bus 0000:00: resource 10 [mem 0x000de000-0x000dffff window]
[    1.076040] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff window]
[    1.076042] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xffffffff window]
[    1.076044] pci_bus 0000:00: resource 13 [io  0x0000-0x0cf7 window]
[    1.076045] pci_bus 0000:00: resource 14 [io  0x0d00-0xffff window]
[    1.076047] pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
[    1.076049] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
[    1.076050] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.076052] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
[    1.076054] pci_bus 0000:06: resource 1 [mem 0xd0200000-0xd02fffff]
[    1.076057] pci_bus 0000:07: resource 4 [mem 0x000a0000-0x000bffff window]
[    1.076058] pci_bus 0000:07: resource 5 [mem 0x000d4000-0x000d5fff window]
[    1.076060] pci_bus 0000:07: resource 6 [mem 0x000d6000-0x000d7fff window]
[    1.076061] pci_bus 0000:07: resource 7 [mem 0x000d8000-0x000d9fff window]
[    1.076063] pci_bus 0000:07: resource 8 [mem 0x000da000-0x000dbfff window]
[    1.076064] pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000ddfff window]
[    1.076066] pci_bus 0000:07: resource 10 [mem 0x000de000-0x000dffff window]
[    1.076067] pci_bus 0000:07: resource 11 [mem 0xc0000000-0xdfffffff window]
[    1.076069] pci_bus 0000:07: resource 12 [mem 0xf0000000-0xffffffff window]
[    1.076070] pci_bus 0000:07: resource 13 [io  0x0000-0x0cf7 window]
[    1.076072] pci_bus 0000:07: resource 14 [io  0x0d00-0xffff window]
[    1.076281] NET: Registered protocol family 2
[    1.076498] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.076609] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.076765] TCP: Hash tables configured (established 32768 bind 32768)
[    1.076821] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.076853] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.076994] NET: Registered protocol family 1
[    1.246406] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.246422] PCI: CLS 32 bytes, default 64
[    1.246485] Unpacking initramfs...
[    1.725948] Freeing initrd memory: 23312K
[    1.726199] PCI-DMA: Disabling AGP.
[    1.726290] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.726291] PCI-DMA: using GART IOMMU.
[    1.726293] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.729360] LVT offset 1 assigned for vector 0x400
[    1.729369] IBS: LVT offset 1 assigned
[    1.729478] perf: AMD IBS detected (0x0000001f)
[    1.729977] audit: initializing netlink subsys (disabled)
[    1.730002] audit: type=2000 audit(1511816140.012:1): initialized
[    1.730613] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.730659] zbud: loaded
[    1.731781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.731820] io scheduler noop registered
[    1.731821] io scheduler deadline registered
[    1.731832] io scheduler cfq registered (default)
[    1.732677] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[    1.732679] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.732680] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    1.732683] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[    1.732697] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    1.732698] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.732700] pcie_pme 0000:00:04.0:pcie001: service driver pcie_pme loaded
[    1.732715] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[    1.732716] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    1.732718] pcie_pme 0000:00:05.0:pcie001: service driver pcie_pme loaded
[    1.732729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.732734] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.732761] ACPI: ACPI: processor limited to max C-state 1
[    1.732928] ERST: Can not request [mem 0xbfeff000-0xbfefffff] for ERST.
[    1.732991] GHES: HEST is not enabled!
[    1.733101] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.733727] Linux agpgart interface v0.103
[    1.733883] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.733883] AMD IOMMUv2 functionality not available on this system
[    1.734100] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.748703] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.748708] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.748988] mousedev: PS/2 mouse device common for all mice
[    1.749313] rtc_cmos 00:01: RTC can wake from S4
[    1.749488] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.749515] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.749566] ledtrig-cpu: registered to indicate activity on CPUs
[    1.749923] NET: Registered protocol family 10
[    1.750233] mip6: Mobile IPv6
[    1.750236] NET: Registered protocol family 17
[    1.750238] mpls_gso: MPLS GSO support
[    1.750485] microcode: microcode updated early to new patch_level=0x010000c8
[    1.750534] microcode: CPU0: patch_level=0x010000c8
[    1.750541] microcode: CPU1: patch_level=0x010000c8
[    1.750608] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.750787] registered taskstats version 1
[    1.750804] zswap: loaded using pool lzo/zbud
[    1.750904] ima: No TPM chip found, activating TPM-bypass!
[    1.751264] rtc_cmos 00:01: setting system clock to 2017-11-27 20:55:41 UTC (1511816141)
[    1.751324] PM: Hibernation image not present or could not be loaded.
[    1.753142] Freeing unused kernel memory: 1396K
[    1.753144] Write protecting the kernel read-only data: 12288k
[    1.754172] Freeing unused kernel memory: 1980K
[    1.758400] Freeing unused kernel memory: 1240K
[    1.766746] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.775414] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.790605] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.790697] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.790708] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.792017] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.792056] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.793372] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.793440] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.793458] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.793924] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.793986] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.842834] pps_core: LinuxPPS API ver. 1 registered
[    1.842836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.843093] PTP clock support registered
[    1.844096] tg3.c:v3.137 (May 11, 2014)
[    1.848454] ACPI: bus type USB registered
[    1.848503] usbcore: registered new interface driver usbfs
[    1.848517] usbcore: registered new interface driver hub
[    1.848560] usbcore: registered new device driver usb
[    1.848688] SCSI subsystem initialized
[    1.849217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.849445] ehci-pci: EHCI PCI platform driver
[    1.849631] QUIRK: Enable AMD PLL fix
[    1.849661] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.849671] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.849678] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.849688] ehci-pci 0000:00:12.2: debug port 1
[    1.849739] ehci-pci 0000:00:12.2: irq 17, io mem 0xd0506000
[    1.850355] thermal LNXTHERM:00: registered as thermal_zone0
[    1.850358] ACPI: Thermal Zone [TZS0] (51 C)
[    1.855528] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.859354] libata version 3.00 loaded.
[    1.861096] libphy: tg3 mdio bus: probed
[    1.861807] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.861902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.861904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.861906] usb usb1: Product: EHCI Host Controller
[    1.861907] usb usb1: Manufacturer: Linux 4.9.0-4-amd64 ehci_hcd
[    1.861908] usb usb1: SerialNumber: 0000:00:12.2
[    1.862222] hub 1-0:1.0: USB hub found
[    1.862230] hub 1-0:1.0: 5 ports detected
[    1.862614] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.862622] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.862626] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.862636] ehci-pci 0000:00:13.2: debug port 1
[    1.862671] ehci-pci 0000:00:13.2: irq 17, io mem 0xd0506400
[    1.864304] thermal LNXTHERM:01: registered as thermal_zone1
[    1.864306] ACPI: Thermal Zone [TZS1] (51 C)
[    1.877805] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.877912] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.877914] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.877915] usb usb2: Product: EHCI Host Controller
[    1.877917] usb usb2: Manufacturer: Linux 4.9.0-4-amd64 ehci_hcd
[    1.877918] usb usb2: SerialNumber: 0000:00:13.2
[    1.878102] hub 2-0:1.0: USB hub found
[    1.878110] hub 2-0:1.0: 5 ports detected
[    1.878827] ohci-pci: OHCI PCI platform driver
[    1.879040] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.879048] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.879087] ohci-pci 0000:00:12.0: irq 18, io mem 0xd0504000
[    1.941957] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.941960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.941962] usb usb3: Product: OHCI PCI host controller
[    1.941963] usb usb3: Manufacturer: Linux 4.9.0-4-amd64 ohci_hcd
[    1.941964] usb usb3: SerialNumber: 0000:00:12.0
[    1.942153] hub 3-0:1.0: USB hub found
[    1.942204] hub 3-0:1.0: 5 ports detected
[    1.942429] ACPI Warning: SystemIO range 0x0000000000008040-0x0000000000008048 conflicts with OpRegion 0x0000000000008040-0x000000000000804F (\_SB.PCI0.SMB.SMB0) (20160831/utaddress-247)
[    1.942435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.943657] scsi host0: pata_atiixp
[    1.943775] scsi host1: pata_atiixp
[    1.943829] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8450 irq 14
[    1.943830] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8458 irq 15
[    1.943871] ahci 0000:00:11.0: version 3.0
[    1.944202] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.944205] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.944356] Broadcom BCM57780 300:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01, irq=-1)
[    1.944750] scsi host2: ahci
[    1.944816] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:ae:db:f3
[    1.944819] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.944821] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.944869] scsi host3: ahci
[    1.944933] ata3: SATA max UDMA/133 abar m1024@0xd0506800 port 0xd0506900 irq 27
[    1.944936] ata4: SATA max UDMA/133 abar m1024@0xd0506800 port 0xd0506980 irq 27
[    1.945290] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.945297] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.945329] ohci-pci 0000:00:13.0: irq 18, io mem 0xd0505000
[    1.947459] tg3 0000:03:00.0 enp3s0: renamed from eth0
[    2.005932] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.005935] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.005937] usb usb4: Product: OHCI PCI host controller
[    2.005938] usb usb4: Manufacturer: Linux 4.9.0-4-amd64 ohci_hcd
[    2.005939] usb usb4: SerialNumber: 0000:00:13.0
[    2.006240] hub 4-0:1.0: USB hub found
[    2.006250] hub 4-0:1.0: 5 ports detected
[    2.189889] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    2.205884] usb 2-5: new high-speed USB device number 2 using ehci-pci
[    2.339484] usb 1-5: New USB device found, idVendor=058f, idProduct=6366
[    2.339486] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.339488] usb 1-5: Product: Mass Storage Device
[    2.339489] usb 1-5: Manufacturer: Generic
[    2.339490] usb 1-5: SerialNumber: 058F63666433
[    2.341687] usb-storage 1-5:1.0: USB Mass Storage device detected
[    2.342061] scsi host4: usb-storage 1-5:1.0
[    2.342161] usbcore: registered new interface driver usb-storage
[    2.342566] usbcore: registered new interface driver uas
[    2.389035] usb 2-5: New USB device found, idVendor=064e, idProduct=a219
[    2.389038] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.389040] usb 2-5: Product: 1.3M WebCam
[    2.389041] usb 2-5: Manufacturer: Suyin
[    2.389042] usb 2-5: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[    2.389812] random: fast init done
[    2.421888] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.421919] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.423076] ata3.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
[    2.423079] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.423804] ata4.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100
[    2.424345] ata3.00: configured for UDMA/133
[    2.424560] ata4.00: configured for UDMA/100
[    2.425076] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-2 1A01 PQ: 0 ANSI: 5
[    2.456723] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7585H  KX04 PQ: 0 ANSI: 5
[    2.472374] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.473550] sd 2:0:0:0: [sda] Write Protect is off
[    2.473553] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.473573] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.490702] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.490705] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.490906] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.538873]  sda: sda1 sda2 < sda5 >
[    2.539442] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.725294] psmouse serio1: synaptics: queried max coordinates: x [..5720], y [..4780]
[    2.733920] tsc: Refined TSC clocksource calibration: 2094.716 MHz
[    2.733925] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e31b101e14, max_idle_ns: 440795238894 ns
[    2.823627] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000/0x0, board id: 0, fw id: 529512
[    2.886154] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.897551] PM: Starting manual resume from disk
[    2.897555] PM: Hibernation image partition 8:5 present
[    2.897556] PM: Looking for hibernation image.
[    2.898258] PM: Image not found (code -22)
[    2.898259] PM: Hibernation image not present or could not be loaded.
[    3.502747] scsi 4:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    3.757956] clocksource: Switched to clocksource tsc
[    4.081514] sd 4:0:0:0: [sdb] 30318592 512-byte logical blocks: (15.5 GB/14.5 GiB)
[    4.082654] sd 4:0:0:0: [sdb] Write Protect is on
[    4.082658] sd 4:0:0:0: [sdb] Mode Sense: 03 00 80 00
[    4.083776] sd 4:0:0:0: [sdb] No Caching mode page found
[    4.083824] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    4.089522]  sdb: sdb1
[    4.094011] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    7.009963] random: crng init done
[   12.342203] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.703725] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.864257] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   13.864416] systemd[1]: Detected architecture x86-64.
[   13.874157] systemd[1]: Set hostname to <debian>.
[   15.322069] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[   15.322843] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   15.322920] systemd[1]: Listening on udev Kernel Socket.
[   15.322974] systemd[1]: Listening on Journal Socket.
[   15.323025] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   15.323117] systemd[1]: Listening on Journal Audit Socket.
[   15.323284] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   15.828915] lp: driver loaded but no devices found
[   15.906811] ppdev: user-space parallel port driver
[   16.265435] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.499120] systemd-journald[196]: Received request to flush runtime journal from PID 1
[   17.749800] acpi_cpufreq: overriding BIOS provided _PSD data
[   17.856301] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   17.856310] ACPI: Power Button [PWRB]
[   17.857655] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[   17.860088] ACPI: Lid Switch [LID0]
[   17.860290] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[   17.860298] ACPI: Sleep Button [SLPB]
[   17.860431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   17.860435] ACPI: Power Button [PWRF]
[   17.905444] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   17.929837] acpi device:02: registered as cooling_device2
[   17.930097] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[   18.011746] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.060353] wmi: Mapper loaded
[   18.188956] ACPI: AC Adapter [ADP1] (on-line)
[   18.337083] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   18.337240] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x41
[   18.337334] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   18.337347] sp5100_tco: Last reboot was not triggered by watchdog.
[   18.337466] sp5100_tco: initialized (0xffffb4c8c0735b00). heartbeat=60 sec (nowayout=0)
[   18.435903] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[   18.706191] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   18.706302] sr 3:0:0:0: Attached scsi generic sg1 type 5
[   18.706399] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   18.738994] [drm] Initialized
[   18.838593] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input8
[   18.841577] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   18.841590] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.841595] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   18.841598] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.841601] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.841605] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   18.841609] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   18.851814] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   18.852069] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   18.852108] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   18.919039] input: PC Speaker as /devices/platform/pcspkr/input/input12
[   19.360854] [drm] radeon kernel modesetting enabled.
[   19.595689] kvm: Nested Virtualization enabled
[   19.595692] kvm: Nested Paging enabled
[   19.649332] EDAC MC: Ver: 3.0.0
[   19.862798] CRAT table not found
[   19.862802] Finished initializing topology ret=0
[   19.862831] kfd kfd: Initialized module
[   19.892974] MCE: In-kernel MCE decoding enabled.
[   19.901077] acer_wmi: Acer Laptop ACPI-WMI Extras
[   19.901093] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[   19.914339] EDAC amd64: DRAM ECC disabled.
[   19.914346] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   19.947381] ath: phy0: Enable WAR for ASPM D3/L1
[   20.379969] ath: phy0: ASPM enabled: 0x42
[   20.379974] ath: EEPROM regdomain: 0x65
[   20.379976] ath: EEPROM indicates we should expect a direct regpair map
[   20.379980] ath: Country alpha2 being used: 00
[   20.379982] ath: Regpair used: 0x65
[   20.381911] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1025:0x0384 0x00).
[   20.381960] [drm] register mmio base: 0xD0000000
[   20.381960] [drm] register mmio size: 131072
[   20.382024] ATOM BIOS: Acer
[   20.382093] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   20.382095] radeon 0000:02:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[   20.382099] [drm] Detected VRAM RAM=512M, BAR=256M
[   20.382100] [drm] RAM width 64bits DDR
[   20.382892] [TTM] Zone  kernel: Available graphics memory: 2024976 kiB
[   20.382893] [TTM] Initializing pool allocator
[   20.382902] [TTM] Initializing DMA pool allocator
[   20.382928] [drm] radeon: 512M of VRAM memory ready
[   20.382929] [drm] radeon: 1024M of GTT memory ready.
[   20.382942] [drm] Loading CEDAR Microcode
[   20.473293] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_pfp.bin
[   20.506535] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_me.bin
[   20.548680] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_rlc.bin
[   20.618542] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_smc.bin
[   20.618559] [drm] Internal thermal controller with fan control
[   20.647430] [drm] radeon: dpm initialized
[   20.866832] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.867509] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffb4c8c0ac0000, irq=17
[   20.906560] ACPI: Battery Slot [BAT0] (battery present)
[   21.098243] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[   21.098336] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   21.101333] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   21.113836] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[   21.113940] radeon 0000:02:00.0: WB enabled
[   21.113971] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff92af78c53c00
[   21.113973] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff92af78c53c0c
[   21.114701] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffb4c8c0c1c418
[   21.114703] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   21.114704] [drm] Driver supports precise vblank timestamp query.
[   21.114705] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[   21.114754] radeon 0000:02:00.0: radeon: using MSI.
[   21.114778] [drm] radeon: irq initialized.
[   21.131057] [drm] ring test on 0 succeeded in 1 usecs
[   21.131061] [drm] ring test on 3 succeeded in 2 usecs
[   21.317710] [drm] ring test on 5 succeeded in 1 usecs
[   21.317719] [drm] UVD initialized successfully.
[   21.318149] [drm] ib test on ring 0 succeeded in 0 usecs
[   21.318184] [drm] ib test on ring 3 succeeded in 0 usecs
[   21.489218] [drm] ib test on ring 5 succeeded
[   21.550251] [drm] radeon atom DIG backlight initialized
[   21.550258] [drm] Radeon Display Connectors
[   21.550262] [drm] Connector 0:
[   21.550264] [drm]   LVDS-1
[   21.550268] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   21.550269] [drm]   Encoders:
[   21.550271] [drm]     LCD1: INTERNAL_UNIPHY
[   21.550273] [drm] Connector 1:
[   21.550274] [drm]   HDMI-A-1
[   21.550276] [drm]   HPD1
[   21.550280] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   21.550281] [drm]   Encoders:
[   21.550282] [drm]     DFP1: INTERNAL_UNIPHY1
[   21.550283] [drm] Connector 2:
[   21.550285] [drm]   VGA-1
[   21.550288] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   21.550289] [drm]   Encoders:
[   21.550291] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   21.966453] [drm] fb mappable at 0xC034D000
[   21.966457] [drm] vram apper at 0xC0000000
[   21.966459] [drm] size 5787648
[   21.966461] [drm] fb depth is 24
[   21.966463] [drm]    pitch is 6400
[   21.966731] fbcon: radeondrmfb (fb0) is primary device
[   22.570760] Console: switching to colour frame buffer device 200x56
[   22.577187] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[   22.603763] [drm] Initialized radeon 2.49.0 20080528 for 0000:02:00.0 on minor 0
[   23.277386] media: Linux media interface: v0.10
[   23.379488] Linux video capture interface: v2.00
[   23.587224] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[   23.597175] uvcvideo 2-5:1.0: Entity type for entity Extension 4 was not initialized!
[   23.597184] uvcvideo 2-5:1.0: Entity type for entity Processing 3 was not initialized!
[   23.597189] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized!
[   23.597460] input: 1.3M WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input13
[   23.597637] usbcore: registered new interface driver uvcvideo
[   23.597639] USB Video Class driver (1.1.1)
[   23.975848] Adding 4191228k swap on /dev/sda5.  Priority:-1 extents:1 across:4191228k FS
[   24.427043] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[   33.346245] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   33.358856] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   33.364244] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   33.384944] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   33.416013] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   34.383279] tg3 0000:03:00.0 enp3s0: Link is down
[   35.963537] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   48.223368] fuse init (API version 7.26)
[   58.172926] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   59.259560] wlp6s0: authenticate with 00:19:70:89:1a:b8
[   59.287361] wlp6s0: send auth to 00:19:70:89:1a:b8 (try 1/3)
[   59.390515] wlp6s0: send auth to 00:19:70:89:1a:b8 (try 2/3)
[   59.393036] wlp6s0: authenticated
[   59.394387] wlp6s0: associate with 00:19:70:89:1a:b8 (try 1/3)
[   59.398733] wlp6s0: RX AssocResp from 00:19:70:89:1a:b8 (capab=0x431 status=0 aid=4)
[   59.398875] wlp6s0: associated
[   59.398895] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[   59.408294] ath: EEPROM regdomain: 0x80fa
[   59.408297] ath: EEPROM indicates we should expect a country code
[   59.408298] ath: doing EEPROM country->regdmn map search
[   59.408299] ath: country maps to regdmn code: 0x37
[   59.408300] ath: Country alpha2 being used: FR
[   59.408301] ath: Regpair used: 0x37
[   59.408303] ath: regdomain 0x80fa dynamically updated by country IE
 



Et la commande cat /var/log/syslog semble me donner un retour incomplet puisque je vois les jours défiler puis ça s'arrête, et le retour de commande affiché commence à 21h57, et je n'ai pas le prompt au dessus, comme si tout n'était pas affiché hmm

Dernière modification par Caribou22 (27-11-2017 23:10:36)

Hors ligne

#4 28-11-2017 00:49:02

tux12
Membre
Lieu : ./
Distrib. : stable
Noyau : celui de la stable
(G)UI : KDE
Inscription : 27-02-2008

Re : Freezes aléatoires sur emachines e640g

Bonjour,

Au vu du caractère aléatoire et total du freeze, on peut suspecter un problème matériel au sens large; ça inclut de mon point de vue autant un problème de contact entre cartes et/ou connecteurs autant qu'une défaillance d'un circuit. Tu peux effectuer une vérification de la RAM avec memtest86. Je suggère d'effectuer au moins 3 passes complètes de test.

Hors ligne

#5 28-11-2017 09:16:42

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

Je ferais ça demain soir si possible, merci smile

Hors ligne

#6 28-11-2017 10:13:27

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-3-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : Freezes aléatoires sur emachines e640g

Bonjour
Ce que je fais je met un filtre pour afficher que l'heure qui m’intéresse
cat /var/log/syslog|grep 21:54
mais les infos reste pas longtemps car le fichier est archivé syslog.1 syslog.2.gz ....

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#7 30-11-2017 21:18:07

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

cat /var/log/syslog|grep 21:54 ne me renvoie rien, même avec un nouveau crash et l'heure appropriée hmm

Je tente le memtest smile

Hors ligne

#8 01-12-2017 15:25:41

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

Comment fonctionne le memtest ? J'en ai lancé un. Il a tourné quelques minutes pour m'annoncer qu'il n'y avait aucune erreur, mais il semblait être encore en cours d'analyse lorsqu'il m'a envoyé ce message...

Hors ligne

#9 01-12-2017 19:01:21

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-3-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : Freezes aléatoires sur emachines e640g

Bonjour
memtest te donne les résultat du test en temps réel mais un test complet est tres long
Sur mon vieux ordinosaure il y a avait 2 barettes de 512 a la base et memtest m'en a trouvé une défectueuse

Edit: j'avais lu qu'il y avait une option a passer a grub pour filtré les plages mémoire
D'apres ce que j'ai compris
https://www.gnu.org/software/grub/manua … adram.html

Dernière modification par Croutons (01-12-2017 19:04:37)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#10 04-12-2017 09:39:34

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

J'ai laissé tourner un memtest. A mon retour, il était comme ça.
1512373023.jpg
Tout était figé sauf un tiret clignotant dans le coin supérieur gauche. Et aucune réaction des touches Esc, C, Espace ou Eetrée. J'ai donc dû éteindre la machine de force.

Comment je peux interpréter ce "résultat" ? hmm

Hors ligne

#11 04-12-2017 11:36:44

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-3-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : Freezes aléatoires sur emachines e640g

Bonjour
Je vois dans ton message 3 des erreurs qui serait lié a l'hibernation, de ce que j'ai pu en comprendre suis sur de rien
Sur mon système j'ai l'hibernation qui foire et c'est les même message , présence d'une image en mémoire et après incapacité de lire l'image en question
Donc si juste après ton crash tu as ce genre de message c'est peut être pas une coïncidence

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#12 04-12-2017 15:56:29

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

Les crashs sont soudains et ne semblent pas liés à l'hibernation : je ne demande pas d'hibernation et je suis en train d'utiliser l'ordi quand ça crash.
Qu'est-ce que je peux faire pour en savoir plus sur l'origine de ces crashs ? hmm

Hors ligne

#13 04-12-2017 17:45:13

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-3-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : Freezes aléatoires sur emachines e640g

Pourtant quand dans ton retour de dmesg c'est comme si tu essayais de sortir d'hibernation
C'est un peu les même message que j'avais quand j'essayais de faire fonctionner la sortie d'hibernation
Edit : voila sur mon PC apres tentative de sortie d'hibernation

dmesg


[    0.000000] Linux version 4.9.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fff8000-0x000000007fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffee0000-0x00000000ffefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: American Megatrends Inc. Uknown/K7S8X., BIOS P2.40 06/25/2004
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 base 0D0000000 mask FF8000000 write-combining
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] initial memory mapped: [mem 0x00000000-0x0adfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0a98f000, 0x0a98ffff] PGTABLE
[    0.000000] BRK [0x0a990000, 0x0a991fff] PGTABLE
[    0.000000] BRK [0x0a992000, 0x0a992fff] PGTABLE
[    0.000000] BRK [0x0a993000, 0x0a993fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35413000-0x36a00fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAB70 000014 (v00 AMI   )
[    0.000000] ACPI: RSDT 0x000000007FFF0000 00002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: FACP 0x000000007FFF0030 000081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B)
[    0.000000] ACPI: DSDT 0x000000007FFF0120 0032B4 (v01 SiS    746      00000100 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x000000007FFF8000 000040
[    0.000000] ACPI: APIC 0x000000007FFF00C0 00005A (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1157MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000007ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[    0.000000] On node 0 totalpages: 524174
[    0.000000] free_area_init_node: node 0, pgdat ca7e67c0, node_mem_map f4213024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 296434 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @f79e7000 s50764 r0 d31156 u81920
[    0.000000] pcpu-alloc: s50764 r0 d31156 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522171
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686-pae root=UUID=fd57af82-2732-4133-8cb9-8c3746c247e4 ro initrd=/install/gtk/initrd.gz quiet resume=/dev/disk/by-uuid/7b38dcc2-b044-4ae8-82e9-0bb1b3761976
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007fff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2045048K/2096696K available (5825K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 51648K reserved, 0K cma-reserved, 1185736K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xca803000 - 0xca8bf000   ( 752 kB)
                     .data : 0xca5b0b14 - 0xca801b00   (2371 kB)
                     .text : 0xca000000 - 0xca5b0b14   (5826 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1916.281 MHz processor
[    0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 3832.56 BogoMIPS (lpj=7665124)
[    0.004026] pid_max: default: 32768 minimum: 301
[    0.004078] ACPI: Core revision 20160831
[    0.011202] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.011275] Security Framework initialized
[    0.011279] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011296] AppArmor: AppArmor disabled by boot time parameter
[    0.011334] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011337] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012052] mce: CPU supports 4 MCE banks
[    0.012079] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.012080] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.019293] Freeing SMP alternatives memory: 24K
[    0.021982] ftrace: allocating 24038 entries in 47 pages
[    0.032274] smpboot: Max logical packages: 1
[    0.032287] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032624] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] smpboot: CPU0: AMD Athlon(tm) XP 2600+ (family: 0x6, model: 0xa, stepping: 0x0)
[    0.076000] Performance Events: AMD PMU driver.
[    0.076000] ... version:                0
[    0.076000] ... bit width:              48
[    0.076000] ... generic registers:      4
[    0.076000] ... value mask:             0000ffffffffffff
[    0.076000] ... max period:             00007fffffffffff
[    0.076000] ... fixed-purpose events:   0
[    0.076000] ... event mask:             000000000000000f
[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] x86: Booted up 1 node, 1 CPUs
[    0.076000] smpboot: Total of 1 processors activated (3832.56 BogoMIPS)
[    0.076000] devtmpfs: initialized
[    0.076000] PM: Registering ACPI NVS region [mem 0x7fff8000-0x7fffffff] (32768 bytes)
[    0.076000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.076000] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.076000] pinctrl core: initialized pinctrl subsystem
[    0.076000] NET: Registered protocol family 16
[    0.076000] cpuidle: using governor ladder
[    0.076000] cpuidle: using governor menu
[    0.076000] ACPI: bus type PCI registered
[    0.076000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.076000] PCI: Using configuration type 1 for base access
[    0.077961] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.078523] ACPI: Added _OSI(Module Device)
[    0.078525] ACPI: Added _OSI(Processor Device)
[    0.078526] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.078528] ACPI: Added _OSI(Processor Aggregator Device)
[    0.082431] ACPI: Interpreter enabled
[    0.082474] ACPI: (supports S0 S1 S3 S4 S5)
[    0.082477] ACPI: Using IOAPIC for interrupt routing
[    0.082526] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.084345] ACPI: Power Resource [URP1] (off)
[    0.085660] ACPI: Power Resource [URP2] (off)
[    0.085740] ACPI: Power Resource [FDDP] (off)
[    0.085814] ACPI: Power Resource [LPTP] (off)
[    0.088802] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.088815] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.088824] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.088832] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.088901] acpi PNP0A03:00: host bridge window expanded to [mem 0x80000000-0xffdfffff window]; [mem 0xfee01000-0xffdfffff window] ignored
[    0.088910] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cb000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ccfff])
[    0.089116] PCI host bridge to bus 0000:00
[    0.089120] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.089123] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.089125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.089128] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffdfffff window]
[    0.089131] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.089155] pci 0000:00:00.0: [1039:0746] type 00 class 0x060000
[    0.089173] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff]
[    0.089357] pci 0000:00:01.0: [1039:0002] type 01 class 0x060400
[    0.089505] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
[    0.089574] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.089700] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[    0.089744] pci 0000:00:02.1: reg 0x20: [io  0x0c00-0x0c1f]
[    0.089888] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[    0.089938] pci 0000:00:02.5: reg 0x20: [io  0xff00-0xff0f]
[    0.089958] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.089960] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.089963] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.089965] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.090095] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[    0.090112] pci 0000:00:02.7: reg 0x10: [io  0xdc00-0xdcff]
[    0.090122] pci 0000:00:02.7: reg 0x14: [io  0xd800-0xd87f]
[    0.090192] pci 0000:00:02.7: supports D1 D2
[    0.090194] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.090327] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.090341] pci 0000:00:03.0: reg 0x10: [mem 0xcfffd000-0xcfffdfff]
[    0.090444] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.090534] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.090548] pci 0000:00:03.1: reg 0x10: [mem 0xcfffe000-0xcfffefff]
[    0.090649] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.090744] pci 0000:00:03.2: [1039:7002] type 00 class 0x0c0320
[    0.090760] pci 0000:00:03.2: reg 0x10: [mem 0xcffff000-0xcfffffff]
[    0.090833] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.090881] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.090978] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[    0.090995] pci 0000:00:04.0: reg 0x10: [io  0xd400-0xd4ff]
[    0.091005] pci 0000:00:04.0: reg 0x14: [mem 0xcfffc000-0xcfffcfff]
[    0.091045] pci 0000:00:04.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.091076] pci 0000:00:04.0: supports D1 D2
[    0.091078] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.091127] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.091301] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[    0.091315] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc7ffffff pref]
[    0.091323] pci 0000:01:00.0: reg 0x14: [io  0xb800-0xb8ff]
[    0.091332] pci 0000:01:00.0: reg 0x18: [mem 0xcfef0000-0xcfefffff]
[    0.091358] pci 0000:01:00.0: reg 0x30: [mem 0xcfec0000-0xcfedffff pref]
[    0.091388] pci 0000:01:00.0: supports D1 D2
[    0.091470] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[    0.091484] pci 0000:01:00.1: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[    0.091492] pci 0000:01:00.1: reg 0x14: [mem 0xcfee0000-0xcfeeffff]
[    0.091546] pci 0000:01:00.1: supports D1 D2
[    0.091648] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.091653] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.091658] pci 0000:00:01.0:   bridge window [mem 0xcfd00000-0xcfefffff]
[    0.091662] pci 0000:00:01.0:   bridge window [mem 0xafa00000-0xcfbfffff pref]
[    0.091671] pci_bus 0000:00: on NUMA node 0
[    0.092517] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.092624] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.092723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.092820] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.092917] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.093016] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.093116] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.093213] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.093626] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.093629] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.093630] vgaarb: loaded
[    0.093631] vgaarb: bridge control possible 0000:01:00.0
[    0.093866] PCI: Using ACPI for IRQ routing
[    0.093870] PCI: pci_cache_line_size set to 32 bytes
[    0.093913] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.093917] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.094350] clocksource: Switched to clocksource refined-jiffies
[    0.113200] VFS: Disk quotas dquot_6.6.0
[    0.113252] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.113495] pnp: PnP ACPI init
[    0.113881] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.113885] system 00:00: [io  0x0295-0x0296] has been reserved
[    0.113888] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.113890] system 00:00: [io  0x0880-0x08ff] has been reserved
[    0.113893] system 00:00: [io  0x0c00-0x0c1f] has been reserved
[    0.113898] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.113907] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.113991] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.114121] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.114239] pnp 00:03: [dma 2]
[    0.114323] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.114675] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.115104] pnp 00:05: [dma 0]
[    0.115231] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.115479] pnp 00:06: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.115730] pnp: PnP ACPI: found 7 devices
[    0.115735] PnPBIOS: Disabled
[    0.154282] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.154310] clocksource: Switched to clocksource acpi_pm
[    0.154327] pci 0000:00:04.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.154361] pci 0000:00:04.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[    0.154369] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.154373] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.154381] pci 0000:00:01.0:   bridge window [mem 0xcfd00000-0xcfefffff]
[    0.154386] pci 0000:00:01.0:   bridge window [mem 0xafa00000-0xcfbfffff pref]
[    0.154395] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.154397] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.154400] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.154402] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffdfffff window]
[    0.154405] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.154407] pci_bus 0000:01: resource 1 [mem 0xcfd00000-0xcfefffff]
[    0.154410] pci_bus 0000:01: resource 2 [mem 0xafa00000-0xcfbfffff pref]
[    0.154541] NET: Registered protocol family 2
[    0.154912] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.154989] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.155128] TCP: Hash tables configured (established 8192 bind 8192)
[    0.155291] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.155318] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.155422] NET: Registered protocol family 1
[    0.324425] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.324432] PCI: CLS 32 bytes, default 32
[    0.324595] Unpacking initramfs...
[    1.069266] Freeing initrd memory: 22456K
[    1.070202] audit: initializing netlink subsys (disabled)
[    1.070271] audit: type=2000 audit(1512407232.067:1): initialized
[    1.070964] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.071000] zbud: loaded
[    1.072335] bounce: pool size: 64 pages
[    1.072365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.072423] io scheduler noop registered
[    1.072425] io scheduler deadline registered
[    1.072450] io scheduler cfq registered (default)
[    1.072647] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.072660] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.072863] GHES: HEST is not enabled!
[    1.072932] isapnp: Scanning for PnP cards...
[    1.426200] isapnp: No Plug & Play device found
[    1.426352] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.446778] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.447463] Linux agpgart interface v0.103
[    1.447629] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
[    1.457425] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    1.457887] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.457890] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.458127] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.458405] mousedev: PS/2 mouse device common for all mice
[    1.458502] rtc_cmos 00:01: RTC can wake from S4
[    1.458695] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.458722] rtc_cmos 00:01: alarms up to one year, 114 bytes nvram
[    1.458759] ledtrig-cpu: registered to indicate activity on CPUs
[    1.459296] NET: Registered protocol family 10
[    1.459778] mip6: Mobile IPv6
[    1.459782] NET: Registered protocol family 17
[    1.459788] mpls_gso: MPLS GSO support
[    1.460090] microcode: AMD CPU family 0x6 not supported
[    1.460100] Using IPI No-Shortcut mode
[    1.460362] registered taskstats version 1
[    1.460391] zswap: loaded using pool lzo/zbud
[    1.460503] ima: No TPM chip found, activating TPM-bypass!
[    1.460878] rtc_cmos 00:01: setting system clock to 2017-12-04 17:07:12 UTC (1512407232)
[    1.460967] PM: Checking hibernation image partition /dev/disk/by-uuid/7b38dcc2-b044-4ae8-82e9-0bb1b3761976
[    1.490878] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.491052] PM: Hibernation image not present or could not be loaded.
[    1.492467] Freeing unused kernel memory: 752K
[    1.492595] Write protecting the kernel text: 5828k
[    1.492667] Write protecting the kernel read-only data: 1724k
[    1.531363] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.531796] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.532927] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.533124] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.533158] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.536253] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.537076] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.537210] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.537373] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.537540] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.625059] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[    1.625072] ACPI Warning: SystemIO range 0x0000000000000C00-0x0000000000000C1F conflicts with OpRegion 0x0000000000000C00-0x0000000000000C1F (\_SB.PCI0.SBRG.SMRG) (20160831/utaddress-247)
[    1.625083] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.630005] SCSI subsystem initialized
[    1.638436] ACPI: bus type USB registered
[    1.638508] usbcore: registered new interface driver usbfs
[    1.638536] usbcore: registered new interface driver hub
[    1.647764] sis900.c: v1.08.10 Apr. 2 2006
[    1.649152] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    1.658008] 0000:00:04.0: Using transceiver found at address 1 as default
[    1.660102] usbcore: registered new device driver usb
[    1.661492] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.662216] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.662591] ehci-pci: EHCI PCI platform driver
[    1.677206] Floppy drive(s): fd0 is 1.44M
[    1.680387] libata version 3.00 loaded.
[    1.684857] eth0: SiS 900 PCI Fast Ethernet at 0x0001d400, IRQ 19, 00:0b:6a:21:36:a3
[    1.686277] ehci-pci 0000:00:03.2: EHCI Host Controller
[    1.686294] ehci-pci 0000:00:03.2: new USB bus registered, assigned bus number 1
[    1.686406] ehci-pci 0000:00:03.2: irq 23, io mem 0xcffff000
[    1.700070] ehci-pci 0000:00:03.2: USB 2.0 started, EHCI 1.00
[    1.700274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.700277] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.700279] usb usb1: Product: EHCI Host Controller
[    1.700282] usb usb1: Manufacturer: Linux 4.9.0-4-686-pae ehci_hcd
[    1.700283] usb usb1: SerialNumber: 0000:00:03.2
[    1.700625] hub 1-0:1.0: USB hub found
[    1.700644] hub 1-0:1.0: 6 ports detected
[    1.701634] ohci-pci: OHCI PCI platform driver
[    1.701997] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    1.702011] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.702082] ohci-pci 0000:00:03.0: irq 20, io mem 0xcfffd000
[    1.706888] FDC 0 is a post-1991 82077
[    1.762130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.762136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.762139] usb usb2: Product: OHCI PCI host controller
[    1.762141] usb usb2: Manufacturer: Linux 4.9.0-4-686-pae ohci_hcd
[    1.762143] usb usb2: SerialNumber: 0000:00:03.0
[    1.762488] hub 2-0:1.0: USB hub found
[    1.762506] hub 2-0:1.0: 3 ports detected
[    1.763233] pata_sis 0000:00:02.5: version 0.5.2
[    1.763270] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[    1.765609] scsi host0: pata_sis
[    1.765990] scsi host1: pata_sis
[    1.766112] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.766115] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.766785] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    1.766799] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.766888] ohci-pci 0000:00:03.1: irq 21, io mem 0xcfffe000
[    1.826094] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.826098] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.826100] usb usb3: Product: OHCI PCI host controller
[    1.826102] usb usb3: Manufacturer: Linux 4.9.0-4-686-pae ohci_hcd
[    1.826104] usb usb3: SerialNumber: 0000:00:03.1
[    1.826892] hub 3-0:1.0: USB hub found
[    1.826910] hub 3-0:1.0: 3 ports detected
[    1.929802] ata1.00: HPA detected: current 156299375, native 156301488
[    1.929812] ata1.00: ATA-6: WDC WD800BB-00FRA0, 77.07W77, max UDMA/100
[    1.929814] ata1.00: 156299375 sectors, multi 16: LBA48
[    1.929923] ata1.01: ATA-7: SAMSUNG SP1614N, TM100-30, max UDMA/100
[    1.929926] ata1.01: 312581808 sectors, multi 16: LBA48
[    1.935511] ata1.00: configured for UDMA/100
[    1.938058] ata1.01: configured for UDMA/100
[    1.938419] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-00FR 7W77 PQ: 0 ANSI: 5
[    1.939624] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SP1614N  0-30 PQ: 0 ANSI: 5
[    2.080021] tsc: Refined TSC clocksource calibration: 1916.315 MHz
[    2.080031] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x373ec087a26, max_idle_ns: 881590599957 ns
[    2.102707] ata2.00: ATAPI: PHILIPS DVDR1640P, P2.0, max UDMA/33
[    2.107552] ata2.00: configured for UDMA/33
[    2.110176] scsi 1:0:0:0: CD-ROM            PHILIPS  DVDR1640P        P2.0 PQ: 0 ANSI: 5
[    2.130659] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.130757] sd 0:0:0:0: [sda] Write Protect is off
[    2.130761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.130799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.151076] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    2.151084] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.152359] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.154084] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.176919] sd 0:0:1:0: [sdb] Write Protect is off
[    2.176982] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.177127]  sda: sda1 sda2 < sda5 >
[    2.177762] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.178294] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.212098] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.230661]  sdb: sdb2 sdb3 sdb4 < sdb5 >
[    2.261697] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.437021] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
[    2.437028] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.437031] usb 3-1: Product: USB OPTICAL MOUSE
[    2.437033] usb 3-1: Manufacturer: PIXART
[    2.448760] hidraw: raw HID events driver (C) Jiri Kosina
[    2.457506] usbcore: registered new interface driver usbhid
[    2.457511] usbhid: USB HID core driver
[    2.460293] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/0003:093A:2510.0001/input/input1
[    2.460816] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:03.1-1/input0
[    2.598424] random: fast init done
[    3.104222] clocksource: Switched to clocksource tsc
[    3.371508] PM: Starting manual resume from disk
[    3.371521] PM: Hibernation image partition 8:5 present
[    3.371523] PM: Looking for hibernation image.
[    3.371881] PM: Image not found (code -22)
[    3.371883] PM: Hibernation image not present or could not be loaded.
[    4.177665] random: crng init done
[    7.187413] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    8.594268] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    8.922294] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.042525] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    9.042827] systemd[1]: Detected architecture x86.
[    9.079151] systemd[1]: Set hostname to <handylinux>.
[   10.917746] systemd[1]: smbd.service: Cannot add dependency job, ignoring: Unit smbd.service is masked.
[   10.917867] systemd[1]: nmbd.service: Cannot add dependency job, ignoring: Unit nmbd.service is masked.
[   10.917960] systemd[1]: nfs-server.service: Cannot add dependency job, ignoring: Unit nfs-server.service is masked.
[   10.920603] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.920911] systemd[1]: Listening on Journal Socket.
[   10.921036] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.921468] systemd[1]: Created slice System Slice.
[   11.266682] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[   11.865215] RPC: Registered named UNIX socket transport module.
[   11.865221] RPC: Registered udp transport module.
[   11.865222] RPC: Registered tcp transport module.
[   11.865223] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.074980] lp: driver loaded but no devices found
[   12.182131] ppdev: user-space parallel port driver
[   12.232135] parport_pc 00:05: reported by Plug and Play ACPI
[   12.232286] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   12.282458] systemd-journald[181]: Received request to flush runtime journal from PID 1
[   12.328266] lp0: using parport0 (interrupt-driven).
[   12.356370] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   12.675591] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.672459] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   13.672473] ACPI: Power Button [PWRB]
[   13.672632] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   13.672635] ACPI: Power Button [PWRF]
[   13.859351] MPU-401 device not found or device busy
[   13.974575] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.073191] gameport gameport0: NS558 PnP Gameport is pnp00:06/gameport0, io 0x200, speed 877kHz
[   14.186556] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.186651] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   14.186732] sr 1:0:0:0: Attached scsi generic sg2 type 5
[   14.316492] [drm] Initialized
[   14.452047] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 59803 usecs (2876 samples)
[   14.452055] snd_intel8x0 0000:00:02.7: clocking to 48000
[   14.597469] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   15.973392] [drm] radeon kernel modesetting enabled.
[   15.977033] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x17AF:0x2012 0x01).
[   15.977074] [drm] register mmio base: 0xCFEF0000
[   15.977075] [drm] register mmio size: 65536
[   15.977667] agpgart-sis 0000:00:00.0: AGP 3.0 bridge
[   15.977682] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[   15.977687] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[   15.996131] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[   15.996150] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
[   15.996155] [drm] Generation 2 PCI interface, using max accessible memory
[   15.996162] radeon 0000:01:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
[   15.996210] [drm] Detected VRAM RAM=128M, BAR=128M
[   15.996212] [drm] RAM width 64bits DDR
[   15.996406] [TTM] Zone  kernel: Available graphics memory: 441272 kiB
[   15.996407] [TTM] Zone highmem: Available graphics memory: 1034140 kiB
[   15.996409] [TTM] Initializing pool allocator
[   15.996424] [TTM] Initializing DMA pool allocator
[   15.996496] [drm] radeon: 128M of VRAM memory ready
[   15.996498] [drm] radeon: 128M of GTT memory ready.
[   15.997777] radeon 0000:01:00.0: WB disabled
[   15.997793] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf8223000
[   15.997799] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.997800] [drm] Driver supports precise vblank timestamp query.
[   15.997853] [drm] radeon: irq initialized.
[   15.997889] [drm] Loading R200 Microcode
[   16.256524] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin
[   16.256906] [drm] radeon: ring at 0x00000000D0001000
[   16.256934] [drm] ring test succeeded in 1 usecs
[   16.257209] [drm] ib test succeeded in 0 usecs
[   16.258499] [drm] Radeon Display Connectors
[   16.258501] [drm] Connector 0:
[   16.258502] [drm]   VGA-1
[   16.258505] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   16.258505] [drm]   Encoders:
[   16.258506] [drm]     CRT1: INTERNAL_DAC1
[   16.258508] [drm] Connector 1:
[   16.258508] [drm]   DVI-I-1
[   16.258509] [drm]   HPD1
[   16.258511] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   16.258512] [drm]   Encoders:
[   16.258512] [drm]     CRT2: INTERNAL_DAC2
[   16.258513] [drm]     DFP1: INTERNAL_TMDS1
[   16.258514] [drm] Connector 2:
[   16.258514] [drm]   SVIDEO-1
[   16.258515] [drm]   Encoders:
[   16.258516] [drm]     TV1: INTERNAL_DAC2
[   16.320948] [drm] fb mappable at 0xC0040000
[   16.320953] [drm] vram apper at 0xC0000000
[   16.320954] [drm] size 5242880
[   16.320955] [drm] fb depth is 24
[   16.320956] [drm]    pitch is 5120
[   16.321657] fbcon: radeondrmfb (fb0) is primary device
[   16.397630] Console: switching to colour frame buffer device 160x64
[   16.421489] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   16.425634] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
[   17.038064] Adding 3211260k swap on /dev/sda5.  Priority:-1 extents:1 across:3211260k FS
[   19.006730] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.698319] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[   34.084537] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.104315] eth0: Media Link Off
[   39.748442] vboxdrv: loading out-of-tree module taints kernel.
[   39.763932] vboxdrv: Found 1 processor cores
[   39.889781] vboxdrv: TSC mode is Synchronous, tentative frequency 1916315094 Hz
[   39.889788] vboxdrv: Successfully loaded version 5.1.30_Debian (interface 0x002a0000)
[   39.936638] VBoxNetFlt: Successfully started.
[   40.051361] VBoxNetAdp: Successfully started.
[   40.111909] VBoxPciLinuxInit
[   40.162019] eth0: Media Link On 100mbps full-duplex
[   41.036144] vboxpci: IOMMU not found (not compiled)
[   45.638930] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
 



y'a comme un air de ressemblance

dmesg|grep PM


[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[    0.076000] Performance Events: AMD PMU driver.
[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] PM: Registering ACPI NVS region [mem 0x7fff8000-0x7fffffff] (32768 bytes)
[    0.088815] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.088824] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.090194] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.090833] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.091078] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.460503] ima: No TPM chip found, activating TPM-bypass!
[    1.460967] PM: Checking hibernation image partition /dev/disk/by-uuid/7b38dcc2-b044-4ae8-82e9-0bb1b3761976
[    1.491052] PM: Hibernation image not present or could not be loaded.
[    3.371508] PM: Starting manual resume from disk
[    3.371521] PM: Hibernation image partition 8:5 present
[    3.371523] PM: Looking for hibernation image.
[    3.371881] PM: Image not found (code -22)
[    3.371883] PM: Hibernation image not present or could not be loaded.
 



Peut être un raccourci clavier qui déclenche une hibernation a l’insu de ton plein gré  tongue

Dernière modification par Croutons (04-12-2017 18:27:03)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#14 05-12-2017 11:19:07

tux12
Membre
Lieu : ./
Distrib. : stable
Noyau : celui de la stable
(G)UI : KDE
Inscription : 27-02-2008

Re : Freezes aléatoires sur emachines e640g

Bonjour,

Caribou22 a écrit :

J'ai laissé tourner un memtest.


Combien de temps environ? comme dit précédemment le memtest peut prendre plusieurs heures, j'estime au moins une heure pour un test complet au vu de matériel et de la quantité de ram.

Caribou22 a écrit :

Tout était figé sauf un tiret clignotant dans le coin supérieur gauche


Il n'y a pas forcément des changements en permanence sur l"affichage, par contre en restant une ou 2 minutes devant l'écran on devrait voir l'état d'avancement du test en cours progresser.  Si rien ne se passe pendant une longue durée il est fort probable que la machine se soit plantée, ce qui va dans le sens d'un problème matériel comme évoqué dans mon post précédent.

Caribou22 a écrit :

Et aucune réaction des touches Esc, C, Espace ou Eetrée.


Il est possible que Esc et C ne réagisse pas instantanément mais ne soit pris en compte qu'à la fin du test courant (pas de la passe entière, juste du test en cours)
Concernant Espace et Entrée, c'est sans effet visible tant que la partie principale centrale n'est pas remplie de lignes d'information.

Si l'on exclut ces risques de mauvaise interprétation, il semble que la machine se soit à nouveau plantée.
Dans ce cas, je suggère d'ouvrir la trappe d'accès à la ram qui doit (je l'espère) exister (généralement sur le dessous du PC) et d'extraire/remettre en place délicatement les barrettes, en prenant soin de se décharger de l'électricité statique en touchant une terre (carcasse de radiateur électrique ou autre) juste avant de procéder à l'intervention. On peut profiter de l'extraction pour passer un chiffon imbibé d'alcool sur les contacts des barrettes afin de les nettoyer.
En espérant que les barrettes ne soient pas soudées directement à la carte-mère, auquel cas il faudra chercher une autre cause (soudure déficiente au niveau des barrettes de ram ou problème de contact sur un autre élément du système, mais s'agissant d'un portable c'est délicat à vérifier ).

Dernière modification par tux12 (05-12-2017 11:32:03)

Hors ligne

#15 08-12-2017 21:47:15

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

Memtest avait tourné quelques heures, je m'étais absenté. Dans le doute, j'ai remplacé les deux barrettes par d'autres : j'ai eu exactement les mêmes symptômes. Un Freeze aléatoire du PC. Ça arrive le plus souvent quand je sollicite le PC, en surfant avec Firefox par exemple.

Sinon, j'ai ces messages quand l'ordi démarre...

Ceux-ci :
1512762328.jpg

Puis ceux-ci :
1512762369.jpg

Puis ils laissent place à LightDM, qui ouvre ma session, puis j'ai droits au fameux freezes pendant l'utilisation hmm

Hors ligne

#16 09-12-2017 11:09:58

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-3-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : Freezes aléatoires sur emachines e640g

Bonjour
Est ce que si tu laisse le PC quelque minutes le Freeze ne disparait pas?

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#17 09-12-2017 12:40:53

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : Freezes aléatoires sur emachines e640g

Je n'ai pas attendu très longtemps, une ou deux minutes en tout cas. Et le freeze était resté total. (Arrêt de l'horloge, console inaccessible... )
Mes messages d'erreurs ne pourraient pas avoir un lien ?

Hors ligne

Pied de page des forums