[ 0.000000] Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=eec3a028-24c8-4b47-8a97-6d0fb1ea3723 ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfe8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe90000-0x00000000bfeacfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfead000-0x00000000bfeaefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfeaf000-0x00000000bfefefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: eMachines eMachines G640 /eMachines G640 , BIOS V1.07 05/10/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f8080-0x000f808f] mapped at [ffff92ae400f8080]
[ 0.000000] Base memory trampoline at [ffff92ae40097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x7f92f000, 0x7f92ffff] PGTABLE
[ 0.000000] BRK [0x7f930000, 0x7f930fff] PGTABLE
[ 0.000000] BRK [0x7f931000, 0x7f931fff] PGTABLE
[ 0.000000] BRK [0x7f932000, 0x7f932fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35267000-0x3692afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F8000 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BFE9C5B3 00007C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFEAC0B5 0000F4 (v03 AMD GUAM 06040000 AMD 000F4240)
[ 0.000000] ACPI: DSDT 0x00000000BFE9C62F 00FA86 (v01 ATI SB800 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 0x00000000BFEAEFC0 000040
[ 0.000000] ACPI: FACS 0x00000000BFEAEFC0 000040
[ 0.000000] ACPI: SLIC 0x00000000BFEAC21D 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: EINJ 0x00000000BFEAC393 0001B0 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: HEST 0x00000000BFEAC543 0002E4 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: BERT 0x00000000BFEAC827 000030 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFEAC857 0000E1 (v01 wheaos wheaosc 06040000 INTL 20050624)
[ 0.000000] ACPI: ERST 0x00000000BFEAC938 000270 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFEACBA8 000386 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: APIC 0x00000000BFEACF2E 00005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x00000000BFEACF8C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFEACFC8 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfe8ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1048108
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12219 pages used for memmap
[ 0.000000] DMA32 zone: 781968 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override: forcing polarity to high active.
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe90000-0xbfeacfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfead000-0xbfeaefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfeaf000-0xbfefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfeff000-0xbfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff92af7fc00000 s103512 r8192 d31656 u1048576
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031708
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=eec3a028-24c8-4b47-8a97-6d0fb1ea3723 ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x5e000000-0x5fffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 3956048K/4192432K available (6196K kernel code, 1137K rwdata, 2856K rodata, 1396K init, 688K bss, 236384K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.698 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.39 BogoMIPS (lpj=8378792)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000051] ACPI: Core revision 20160831
[ 0.011766] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.011831] Security Framework initialized
[ 0.011833] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.011839] AppArmor: AppArmor disabled by boot time parameter
[ 0.012150] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014178] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014184] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014532] CPU: Physical Processor ID: 0
[ 0.014533] CPU: Processor Core ID: 0
[ 0.014535] mce: CPU supports 6 MCE banks
[ 0.014541] LVT offset 0 assigned for vector 0xf9
[ 0.014546] process: using AMD E400 aware idle routine
[ 0.014548] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.014549] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.016567] Freeing SMP alternatives memory: 24K
[ 0.629368] ftrace: allocating 25191 entries in 99 pages
[ 0.640106] smpboot: Max logical packages: 1
[ 0.640475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.787379] smpboot: CPU0: AMD Athlon(tm) II P320 Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3)
[ 0.787385] Performance Events: AMD PMU driver.
[ 0.787389] ... version: 0
[ 0.787390] ... bit width: 48
[ 0.787390] ... generic registers: 4
[ 0.787391] ... value mask: 0000ffffffffffff
[ 0.787392] ... max period: 00007fffffffffff
[ 0.787392] ... fixed-purpose events: 0
[ 0.787393] ... event mask: 000000000000000f
[ 0.788013] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.788170] x86: Booting SMP configuration:
[ 0.788172] .... node #0, CPUs: #1
[ 0.869406] process: System has AMD C1E enabled
[ 0.869418] process: Switch to broadcast mode on CPU0
[ 0.869422] process: Switch to broadcast mode on CPU1
[ 0.869529] x86: Booted up 1 node, 2 CPUs
[ 0.869532] smpboot: Total of 2 processors activated (8378.87 BogoMIPS)
[ 0.870253] devtmpfs: initialized
[ 0.870353] x86/mm: Memory block size: 128MB
[ 0.874869] PM: Registering ACPI NVS region [mem 0xbfead000-0xbfeaefff] (8192 bytes)
[ 0.874932] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.874941] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.874988] pinctrl core: initialized pinctrl subsystem
[ 0.877037] NET: Registered protocol family 16
[ 0.889480] cpuidle: using governor ladder
[ 0.905480] cpuidle: using governor menu
[ 0.905488] node 0 link 0: io port [1000, ffff]
[ 0.905490] TOM: 00000000c0000000 aka 3072M
[ 0.905492] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.905494] node 0 link 0: mmio [a0000, bffff]
[ 0.905496] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.905498] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.905500] node 0 link 0: mmio [f0000000, ff7fffff]
[ 0.905501] TOM2: 0000000140000000 aka 5120M
[ 0.905503] bus: [bus 00-1f] on node 0 link 0
[ 0.905504] bus: 00 [io 0x0000-0xffff]
[ 0.905505] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.905506] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.905507] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.905508] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.905569] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.905571] ACPI: bus type PCI registered
[ 0.905573] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.905678] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
[ 0.905681] PCI: not using MMCONFIG
[ 0.905682] PCI: Using configuration type 1 for base access
[ 0.905682] PCI: Using configuration type 1 for extended access
[ 0.905921] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.905922] mtrr: probably your BIOS does not setup all CPUs.
[ 0.905922] mtrr: corrected configuration.
[ 0.921751] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.921752] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.922125] ACPI: Added _OSI(Module Device)
[ 0.922127] ACPI: Added _OSI(Processor Device)
[ 0.922128] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.922129] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.926548] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.926881] ACPI: Dynamic OEM Table Load:
[ 0.926887] ACPI: OEMN 0xFFFF92AF7A483680 000024 (v01 AMD NAHP 00000001 MSFT 03000001)
[ 0.927537] ACPI : EC: EC started
[ 0.927538] ACPI : EC: interrupt blocked
[ 0.957443] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[ 0.957446] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.957447] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[ 0.957448] ACPI: Interpreter enabled
[ 0.957468] ACPI: (supports S0 S3 S4 S5)
[ 0.957469] ACPI: Using IOAPIC for interrupt routing
[ 0.957627] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
[ 0.958109] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] not reserved in ACPI motherboard resources
[ 0.958110] PCI: not using MMCONFIG
[ 0.958146] [Firmware Warn]: HEST: Duplicated hardware error source ID: 9.
[ 0.958167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.974091] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.974097] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.974449] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.974450] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.975459] PCI host bridge to bus 0000:00
[ 0.975462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.975464] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff window]
[ 0.975465] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff window]
[ 0.975467] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff window]
[ 0.975468] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff window]
[ 0.975470] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff window]
[ 0.975471] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff window]
[ 0.975473] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.975475] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[ 0.975476] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.975478] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.975480] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.975491] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.975629] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.975672] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.975734] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.975789] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.975830] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.975889] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.975935] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[ 0.975975] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.976034] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.976132] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.976150] pci 0000:00:11.0: reg 0x10: [io 0x8440-0x8447]
[ 0.976160] pci 0000:00:11.0: reg 0x14: [io 0x8430-0x8433]
[ 0.976169] pci 0000:00:11.0: reg 0x18: [io 0x8420-0x8427]
[ 0.976178] pci 0000:00:11.0: reg 0x1c: [io 0x8410-0x8413]
[ 0.976187] pci 0000:00:11.0: reg 0x20: [io 0x8400-0x840f]
[ 0.976196] pci 0000:00:11.0: reg 0x24: [mem 0xd0506800-0xd0506bff]
[ 0.976336] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.976349] pci 0000:00:12.0: reg 0x10: [mem 0xd0504000-0xd0504fff]
[ 0.976460] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.976516] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.976532] pci 0000:00:12.2: reg 0x10: [mem 0xd0506000-0xd05060ff]
[ 0.976611] pci 0000:00:12.2: supports D1 D2
[ 0.976612] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.976670] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.976729] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.976743] pci 0000:00:13.0: reg 0x10: [mem 0xd0505000-0xd0505fff]
[ 0.976853] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.976909] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.976925] pci 0000:00:13.2: reg 0x10: [mem 0xd0506400-0xd05064ff]
[ 0.977004] pci 0000:00:13.2: supports D1 D2
[ 0.977005] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.977063] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.977120] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.977276] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.977290] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.977299] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.977308] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.977317] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.977326] pci 0000:00:14.1: reg 0x20: [io 0x8450-0x845f]
[ 0.977346] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.977347] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.977349] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.977350] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.977458] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.977478] pci 0000:00:14.2: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[ 0.977545] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.977602] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.977652] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.977814] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.977904] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.977958] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.978052] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.978142] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.978232] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.978325] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.978486] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
[ 0.978501] pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.978511] pci 0000:02:00.0: reg 0x18: [mem 0xd0000000-0xd001ffff 64bit]
[ 0.978518] pci 0000:02:00.0: reg 0x20: [io 0x9000-0x90ff]
[ 0.978530] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.978565] pci 0000:02:00.0: supports D1 D2
[ 0.978628] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[ 0.978643] pci 0000:02:00.1: reg 0x10: [mem 0xd0020000-0xd0023fff 64bit]
[ 0.978703] pci 0000:02:00.1: supports D1 D2
[ 0.989490] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.989496] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.989498] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.989502] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.989610] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[ 0.989632] pci 0000:03:00.0: reg 0x10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.989749] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 1.037491] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 1.037497] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 1.037595] pci 0000:06:00.0: [168c:002a] type 00 class 0x028000
[ 1.037617] pci 0000:06:00.0: reg 0x10: [mem 0xd0200000-0xd020ffff 64bit]
[ 1.037726] pci 0000:06:00.0: supports D1
[ 1.037728] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 1.053489] pci 0000:00:05.0: PCI bridge to [bus 06]
[ 1.053495] pci 0000:00:05.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 1.053607] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 1.053616] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 1.053618] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff window] (subtractive decode)
[ 1.053620] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff window] (subtractive decode)
[ 1.053621] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff window] (subtractive decode)
[ 1.053623] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff window] (subtractive decode)
[ 1.053625] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff window] (subtractive decode)
[ 1.053627] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff window] (subtractive decode)
[ 1.053628] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 1.053630] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[ 1.053634] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 1.053636] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 1.054026] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 1.054105] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 1.054187] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 1.054267] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 1.054334] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 1.054387] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 1.054441] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 1.054495] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 1.055074] ACPI : EC: interrupt unblocked
[ 1.055082] ACPI : EC: event unblocked
[ 1.055088] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.055090] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.055279] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 1.055281] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.055283] vgaarb: loaded
[ 1.055284] vgaarb: bridge control possible 0000:02:00.0
[ 1.055417] PCI: Using ACPI for IRQ routing
[ 1.055420] PCI: pci_cache_line_size set to 64 bytes
[ 1.055488] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 1.055490] e820: reserve RAM buffer [mem 0xbfe90000-0xbfffffff]
[ 1.055707] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.055711] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.057770] clocksource: Switched to clocksource hpet
[ 1.066909] VFS: Disk quotas dquot_6.6.0
[ 1.066941] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.067063] pnp: PnP ACPI init
[ 1.067229] system 00:00: [io 0x0f50-0x0f51] has been reserved
[ 1.067232] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.067234] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.067238] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.067656] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.067738] system 00:02: [io 0x0220-0x022f] has been reserved
[ 1.067740] system 00:02: [io 0x040b] has been reserved
[ 1.067742] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 1.067744] system 00:02: [io 0x04d6] has been reserved
[ 1.067745] system 00:02: [io 0x0530-0x0537] has been reserved
[ 1.067747] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.067750] system 00:02: [io 0x0c14] has been reserved
[ 1.067751] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.067753] system 00:02: [io 0x0c6c] has been reserved
[ 1.067755] system 00:02: [io 0x0c6f] has been reserved
[ 1.067757] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.067758] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.067760] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 1.067762] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 1.067764] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 1.067766] system 00:02: [io 0x8000-0x805f] has been reserved
[ 1.067768] system 00:02: [io 0x8100-0x81ff window] has been reserved
[ 1.067770] system 00:02: [io 0x8200-0x82ff window] has been reserved
[ 1.067772] system 00:02: [io 0x0f40-0x0f47] has been reserved
[ 1.067774] system 00:02: [io 0x087f] has been reserved
[ 1.067776] system 00:02: [mem 0xff800000-0xff800fff] has been reserved
[ 1.067778] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.067912] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.067914] system 00:03: [mem 0xffe00000-0xffffffff] could not be reserved
[ 1.067916] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.067918] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.067920] system 00:03: [mem 0xfed61000-0xfed613ff] has been reserved
[ 1.067922] system 00:03: [mem 0xfed80000-0xfed80fff] has been reserved
[ 1.067924] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.068019] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.068050] pnp 00:05: Plug and Play ACPI device, IDs SYN1b37 SYN1b00 SYN0002 PNP0f13 (active)
[ 1.068089] pnp: PnP ACPI: found 6 devices
[ 1.075946] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.075983] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0040000-0xd005ffff pref]
[ 1.075986] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.075988] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 1.075991] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 1.075994] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.075997] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 1.076000] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 1.076004] pci 0000:00:05.0: PCI bridge to [bus 06]
[ 1.076007] pci 0000:00:05.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 1.076011] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 1.076029] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
[ 1.076031] pci_bus 0000:00: resource 5 [mem 0x000d4000-0x000d5fff window]
[ 1.076033] pci_bus 0000:00: resource 6 [mem 0x000d6000-0x000d7fff window]
[ 1.076034] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000d9fff window]
[ 1.076036] pci_bus 0000:00: resource 8 [mem 0x000da000-0x000dbfff window]
[ 1.076037] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000ddfff window]
[ 1.076039] pci_bus 0000:00: resource 10 [mem 0x000de000-0x000dffff window]
[ 1.076040] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff window]
[ 1.076042] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xffffffff window]
[ 1.076044] pci_bus 0000:00: resource 13 [io 0x0000-0x0cf7 window]
[ 1.076045] pci_bus 0000:00: resource 14 [io 0x0d00-0xffff window]
[ 1.076047] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 1.076049] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
[ 1.076050] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.076052] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
[ 1.076054] pci_bus 0000:06: resource 1 [mem 0xd0200000-0xd02fffff]
[ 1.076057] pci_bus 0000:07: resource 4 [mem 0x000a0000-0x000bffff window]
[ 1.076058] pci_bus 0000:07: resource 5 [mem 0x000d4000-0x000d5fff window]
[ 1.076060] pci_bus 0000:07: resource 6 [mem 0x000d6000-0x000d7fff window]
[ 1.076061] pci_bus 0000:07: resource 7 [mem 0x000d8000-0x000d9fff window]
[ 1.076063] pci_bus 0000:07: resource 8 [mem 0x000da000-0x000dbfff window]
[ 1.076064] pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000ddfff window]
[ 1.076066] pci_bus 0000:07: resource 10 [mem 0x000de000-0x000dffff window]
[ 1.076067] pci_bus 0000:07: resource 11 [mem 0xc0000000-0xdfffffff window]
[ 1.076069] pci_bus 0000:07: resource 12 [mem 0xf0000000-0xffffffff window]
[ 1.076070] pci_bus 0000:07: resource 13 [io 0x0000-0x0cf7 window]
[ 1.076072] pci_bus 0000:07: resource 14 [io 0x0d00-0xffff window]
[ 1.076281] NET: Registered protocol family 2
[ 1.076498] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.076609] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.076765] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.076821] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.076853] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.076994] NET: Registered protocol family 1
[ 1.246406] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.246422] PCI: CLS 32 bytes, default 64
[ 1.246485] Unpacking initramfs...
[ 1.725948] Freeing initrd memory: 23312K
[ 1.726199] PCI-DMA: Disabling AGP.
[ 1.726290] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.726291] PCI-DMA: using GART IOMMU.
[ 1.726293] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.729360] LVT offset 1 assigned for vector 0x400
[ 1.729369] IBS: LVT offset 1 assigned
[ 1.729478] perf: AMD IBS detected (0x0000001f)
[ 1.729977] audit: initializing netlink subsys (disabled)
[ 1.730002] audit: type=2000 audit(1511816140.012:1): initialized
[ 1.730613] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.730659] zbud: loaded
[ 1.731781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.731820] io scheduler noop registered
[ 1.731821] io scheduler deadline registered
[ 1.731832] io scheduler cfq registered (default)
[ 1.732677] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.732679] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.732680] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 1.732683] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 1.732697] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 1.732698] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.732700] pcie_pme 0000:00:04.0:pcie001: service driver pcie_pme loaded
[ 1.732715] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 1.732716] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.732718] pcie_pme 0000:00:05.0:pcie001: service driver pcie_pme loaded
[ 1.732729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.732734] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.732761] ACPI: ACPI: processor limited to max C-state 1
[ 1.732928] ERST: Can not request [mem 0xbfeff000-0xbfefffff] for ERST.
[ 1.732991] GHES: HEST is not enabled!
[ 1.733101] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.733727] Linux agpgart interface v0.103
[ 1.733883] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.733883] AMD IOMMUv2 functionality not available on this system
[ 1.734100] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.748703] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.748708] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.748988] mousedev: PS/2 mouse device common for all mice
[ 1.749313] rtc_cmos 00:01: RTC can wake from S4
[ 1.749488] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.749515] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.749566] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.749923] NET: Registered protocol family 10
[ 1.750233] mip6: Mobile IPv6
[ 1.750236] NET: Registered protocol family 17
[ 1.750238] mpls_gso: MPLS GSO support
[ 1.750485] microcode: microcode updated early to new patch_level=0x010000c8
[ 1.750534] microcode: CPU0: patch_level=0x010000c8
[ 1.750541] microcode: CPU1: patch_level=0x010000c8
[ 1.750608] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.750787] registered taskstats version 1
[ 1.750804] zswap: loaded using pool lzo/zbud
[ 1.750904] ima: No TPM chip found, activating TPM-bypass!
[ 1.751264] rtc_cmos 00:01: setting system clock to 2017-11-27 20:55:41 UTC (1511816141)
[ 1.751324] PM: Hibernation image not present or could not be loaded.
[ 1.753142] Freeing unused kernel memory: 1396K
[ 1.753144] Write protecting the kernel read-only data: 12288k
[ 1.754172] Freeing unused kernel memory: 1980K
[ 1.758400] Freeing unused kernel memory: 1240K
[ 1.766746] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.775414] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.790605] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.790697] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.790708] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.792017] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.792056] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.793372] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.793440] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.793458] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.793924] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.793986] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.842834] pps_core: LinuxPPS API ver. 1 registered
[ 1.842836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.843093] PTP clock support registered
[ 1.844096] tg3.c:v3.137 (May 11, 2014)
[ 1.848454] ACPI: bus type USB registered
[ 1.848503] usbcore: registered new interface driver usbfs
[ 1.848517] usbcore: registered new interface driver hub
[ 1.848560] usbcore: registered new device driver usb
[ 1.848688] SCSI subsystem initialized
[ 1.849217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.849445] ehci-pci: EHCI PCI platform driver
[ 1.849631] QUIRK: Enable AMD PLL fix
[ 1.849661] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.849671] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.849678] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.849688] ehci-pci 0000:00:12.2: debug port 1
[ 1.849739] ehci-pci 0000:00:12.2: irq 17, io mem 0xd0506000
[ 1.850355] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.850358] ACPI: Thermal Zone [TZS0] (51 C)
[ 1.855528] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.859354] libata version 3.00 loaded.
[ 1.861096] libphy: tg3 mdio bus: probed
[ 1.861807] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.861902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.861904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.861906] usb usb1: Product: EHCI Host Controller
[ 1.861907] usb usb1: Manufacturer: Linux 4.9.0-4-amd64 ehci_hcd
[ 1.861908] usb usb1: SerialNumber: 0000:00:12.2
[ 1.862222] hub 1-0:1.0: USB hub found
[ 1.862230] hub 1-0:1.0: 5 ports detected
[ 1.862614] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.862622] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.862626] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.862636] ehci-pci 0000:00:13.2: debug port 1
[ 1.862671] ehci-pci 0000:00:13.2: irq 17, io mem 0xd0506400
[ 1.864304] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.864306] ACPI: Thermal Zone [TZS1] (51 C)
[ 1.877805] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.877912] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.877914] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.877915] usb usb2: Product: EHCI Host Controller
[ 1.877917] usb usb2: Manufacturer: Linux 4.9.0-4-amd64 ehci_hcd
[ 1.877918] usb usb2: SerialNumber: 0000:00:13.2
[ 1.878102] hub 2-0:1.0: USB hub found
[ 1.878110] hub 2-0:1.0: 5 ports detected
[ 1.878827] ohci-pci: OHCI PCI platform driver
[ 1.879040] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.879048] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.879087] ohci-pci 0000:00:12.0: irq 18, io mem 0xd0504000
[ 1.941957] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.941960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.941962] usb usb3: Product: OHCI PCI host controller
[ 1.941963] usb usb3: Manufacturer: Linux 4.9.0-4-amd64 ohci_hcd
[ 1.941964] usb usb3: SerialNumber: 0000:00:12.0
[ 1.942153] hub 3-0:1.0: USB hub found
[ 1.942204] hub 3-0:1.0: 5 ports detected
[ 1.942429] ACPI Warning: SystemIO range 0x0000000000008040-0x0000000000008048 conflicts with OpRegion 0x0000000000008040-0x000000000000804F (\_SB.PCI0.SMB.SMB0) (20160831/utaddress-247)
[ 1.942435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.943657] scsi host0: pata_atiixp
[ 1.943775] scsi host1: pata_atiixp
[ 1.943829] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8450 irq 14
[ 1.943830] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8458 irq 15
[ 1.943871] ahci 0000:00:11.0: version 3.0
[ 1.944202] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.944205] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.944356] Broadcom BCM57780 300:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01, irq=-1)
[ 1.944750] scsi host2: ahci
[ 1.944816] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:ae:db:f3
[ 1.944819] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.944821] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.944869] scsi host3: ahci
[ 1.944933] ata3: SATA max UDMA/133 abar m1024@0xd0506800 port 0xd0506900 irq 27
[ 1.944936] ata4: SATA max UDMA/133 abar m1024@0xd0506800 port 0xd0506980 irq 27
[ 1.945290] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.945297] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.945329] ohci-pci 0000:00:13.0: irq 18, io mem 0xd0505000
[ 1.947459] tg3 0000:03:00.0 enp3s0: renamed from eth0
[ 2.005932] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.005935] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.005937] usb usb4: Product: OHCI PCI host controller
[ 2.005938] usb usb4: Manufacturer: Linux 4.9.0-4-amd64 ohci_hcd
[ 2.005939] usb usb4: SerialNumber: 0000:00:13.0
[ 2.006240] hub 4-0:1.0: USB hub found
[ 2.006250] hub 4-0:1.0: 5 ports detected
[ 2.189889] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 2.205884] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 2.339484] usb 1-5: New USB device found, idVendor=058f, idProduct=6366
[ 2.339486] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.339488] usb 1-5: Product: Mass Storage Device
[ 2.339489] usb 1-5: Manufacturer: Generic
[ 2.339490] usb 1-5: SerialNumber: 058F63666433
[ 2.341687] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 2.342061] scsi host4: usb-storage 1-5:1.0
[ 2.342161] usbcore: registered new interface driver usb-storage
[ 2.342566] usbcore: registered new interface driver uas
[ 2.389035] usb 2-5: New USB device found, idVendor=064e, idProduct=a219
[ 2.389038] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.389040] usb 2-5: Product: 1.3M WebCam
[ 2.389041] usb 2-5: Manufacturer: Suyin
[ 2.389042] usb 2-5: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[ 2.389812] random: fast init done
[ 2.421888] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.421919] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.423076] ata3.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
[ 2.423079] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.423804] ata4.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100
[ 2.424345] ata3.00: configured for UDMA/133
[ 2.424560] ata4.00: configured for UDMA/100
[ 2.425076] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 1A01 PQ: 0 ANSI: 5
[ 2.456723] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7585H KX04 PQ: 0 ANSI: 5
[ 2.472374] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.473550] sd 2:0:0:0: [sda] Write Protect is off
[ 2.473553] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.473573] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.490702] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.490705] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.490906] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.538873] sda: sda1 sda2 < sda5 >
[ 2.539442] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.725294] psmouse serio1: synaptics: queried max coordinates: x [..5720], y [..4780]
[ 2.733920] tsc: Refined TSC clocksource calibration: 2094.716 MHz
[ 2.733925] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e31b101e14, max_idle_ns: 440795238894 ns
[ 2.823627] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000/0x0, board id: 0, fw id: 529512
[ 2.886154] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.897551] PM: Starting manual resume from disk
[ 2.897555] PM: Hibernation image partition 8:5 present
[ 2.897556] PM: Looking for hibernation image.
[ 2.898258] PM: Image not found (code -22)
[ 2.898259] PM: Hibernation image not present or could not be loaded.
[ 3.502747] scsi 4:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 3.757956] clocksource: Switched to clocksource tsc
[ 4.081514] sd 4:0:0:0: [sdb] 30318592 512-byte logical blocks: (15.5 GB/14.5 GiB)
[ 4.082654] sd 4:0:0:0: [sdb] Write Protect is on
[ 4.082658] sd 4:0:0:0: [sdb] Mode Sense: 03 00 80 00
[ 4.083776] sd 4:0:0:0: [sdb] No Caching mode page found
[ 4.083824] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.089522] sdb: sdb1
[ 4.094011] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.009963] random: crng init done
[ 12.342203] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.703725] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.864257] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 13.864416] systemd[1]: Detected architecture x86-64.
[ 13.874157] systemd[1]: Set hostname to <debian>.
[ 15.322069] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[ 15.322843] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.322920] systemd[1]: Listening on udev Kernel Socket.
[ 15.322974] systemd[1]: Listening on Journal Socket.
[ 15.323025] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 15.323117] systemd[1]: Listening on Journal Audit Socket.
[ 15.323284] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.828915] lp: driver loaded but no devices found
[ 15.906811] ppdev: user-space parallel port driver
[ 16.265435] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.499120] systemd-journald[196]: Received request to flush runtime journal from PID 1
[ 17.749800] acpi_cpufreq: overriding BIOS provided _PSD data
[ 17.856301] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 17.856310] ACPI: Power Button [PWRB]
[ 17.857655] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 17.860088] ACPI: Lid Switch [LID0]
[ 17.860290] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 17.860298] ACPI: Sleep Button [SLPB]
[ 17.860431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 17.860435] ACPI: Power Button [PWRF]
[ 17.905444] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.929837] acpi device:02: registered as cooling_device2
[ 17.930097] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[ 18.011746] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.060353] wmi: Mapper loaded
[ 18.188956] ACPI: AC Adapter [ADP1] (on-line)
[ 18.337083] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 18.337240] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x41
[ 18.337334] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 18.337347] sp5100_tco: Last reboot was not triggered by watchdog.
[ 18.337466] sp5100_tco: initialized (0xffffb4c8c0735b00). heartbeat=60 sec (nowayout=0)
[ 18.435903] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 18.706191] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 18.706302] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 18.706399] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 18.738994] [drm] Initialized
[ 18.838593] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input8
[ 18.841577] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 18.841590] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.841595] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 18.841598] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 18.841601] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 18.841605] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 18.841609] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 18.851814] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 18.852069] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 18.852108] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 18.919039] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 19.360854] [drm] radeon kernel modesetting enabled.
[ 19.595689] kvm: Nested Virtualization enabled
[ 19.595692] kvm: Nested Paging enabled
[ 19.649332] EDAC MC: Ver: 3.0.0
[ 19.862798] CRAT table not found
[ 19.862802] Finished initializing topology ret=0
[ 19.862831] kfd kfd: Initialized module
[ 19.892974] MCE: In-kernel MCE decoding enabled.
[ 19.901077] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 19.901093] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[ 19.914339] EDAC amd64: DRAM ECC disabled.
[ 19.914346] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 19.947381] ath: phy0: Enable WAR for ASPM D3/L1
[ 20.379969] ath: phy0: ASPM enabled: 0x42
[ 20.379974] ath: EEPROM regdomain: 0x65
[ 20.379976] ath: EEPROM indicates we should expect a direct regpair map
[ 20.379980] ath: Country alpha2 being used: 00
[ 20.379982] ath: Regpair used: 0x65
[ 20.381911] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1025:0x0384 0x00).
[ 20.381960] [drm] register mmio base: 0xD0000000
[ 20.381960] [drm] register mmio size: 131072
[ 20.382024] ATOM BIOS: Acer
[ 20.382093] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 20.382095] radeon 0000:02:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 20.382099] [drm] Detected VRAM RAM=512M, BAR=256M
[ 20.382100] [drm] RAM width 64bits DDR
[ 20.382892] [TTM] Zone kernel: Available graphics memory: 2024976 kiB
[ 20.382893] [TTM] Initializing pool allocator
[ 20.382902] [TTM] Initializing DMA pool allocator
[ 20.382928] [drm] radeon: 512M of VRAM memory ready
[ 20.382929] [drm] radeon: 1024M of GTT memory ready.
[ 20.382942] [drm] Loading CEDAR Microcode
[ 20.473293] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_pfp.bin
[ 20.506535] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_me.bin
[ 20.548680] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_rlc.bin
[ 20.618542] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CEDAR_smc.bin
[ 20.618559] [drm] Internal thermal controller with fan control
[ 20.647430] [drm] radeon: dpm initialized
[ 20.866832] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.867509] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffb4c8c0ac0000, irq=17
[ 20.906560] ACPI: Battery Slot [BAT0] (battery present)
[ 21.098243] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[ 21.098336] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 21.101333] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 21.113836] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 21.113940] radeon 0000:02:00.0: WB enabled
[ 21.113971] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff92af78c53c00
[ 21.113973] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff92af78c53c0c
[ 21.114701] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffb4c8c0c1c418
[ 21.114703] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 21.114704] [drm] Driver supports precise vblank timestamp query.
[ 21.114705] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[ 21.114754] radeon 0000:02:00.0: radeon: using MSI.
[ 21.114778] [drm] radeon: irq initialized.
[ 21.131057] [drm] ring test on 0 succeeded in 1 usecs
[ 21.131061] [drm] ring test on 3 succeeded in 2 usecs
[ 21.317710] [drm] ring test on 5 succeeded in 1 usecs
[ 21.317719] [drm] UVD initialized successfully.
[ 21.318149] [drm] ib test on ring 0 succeeded in 0 usecs
[ 21.318184] [drm] ib test on ring 3 succeeded in 0 usecs
[ 21.489218] [drm] ib test on ring 5 succeeded
[ 21.550251] [drm] radeon atom DIG backlight initialized
[ 21.550258] [drm] Radeon Display Connectors
[ 21.550262] [drm] Connector 0:
[ 21.550264] [drm] LVDS-1
[ 21.550268] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 21.550269] [drm] Encoders:
[ 21.550271] [drm] LCD1: INTERNAL_UNIPHY
[ 21.550273] [drm] Connector 1:
[ 21.550274] [drm] HDMI-A-1
[ 21.550276] [drm] HPD1
[ 21.550280] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 21.550281] [drm] Encoders:
[ 21.550282] [drm] DFP1: INTERNAL_UNIPHY1
[ 21.550283] [drm] Connector 2:
[ 21.550285] [drm] VGA-1
[ 21.550288] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 21.550289] [drm] Encoders:
[ 21.550291] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 21.966453] [drm] fb mappable at 0xC034D000
[ 21.966457] [drm] vram apper at 0xC0000000
[ 21.966459] [drm] size 5787648
[ 21.966461] [drm] fb depth is 24
[ 21.966463] [drm] pitch is 6400
[ 21.966731] fbcon: radeondrmfb (fb0) is primary device
[ 22.570760] Console: switching to colour frame buffer device 200x56
[ 22.577187] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 22.603763] [drm] Initialized radeon 2.49.0 20080528 for 0000:02:00.0 on minor 0
[ 23.277386] media: Linux media interface: v0.10
[ 23.379488] Linux video capture interface: v2.00
[ 23.587224] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 23.597175] uvcvideo 2-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 23.597184] uvcvideo 2-5:1.0: Entity type for entity Processing 3 was not initialized!
[ 23.597189] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 23.597460] input: 1.3M WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input13
[ 23.597637] usbcore: registered new interface driver uvcvideo
[ 23.597639] USB Video Class driver (1.1.1)
[ 23.975848] Adding 4191228k swap on /dev/sda5. Priority:-1 extents:1 across:4191228k FS
[ 24.427043] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[ 33.346245] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 33.358856] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 33.364244] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 33.384944] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 33.416013] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 34.383279] tg3 0000:03:00.0 enp3s0: Link is down
[ 35.963537] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 48.223368] fuse init (API version 7.26)
[ 58.172926] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 59.259560] wlp6s0: authenticate with 00:19:70:89:1a:b8
[ 59.287361] wlp6s0: send auth to 00:19:70:89:1a:b8 (try 1/3)
[ 59.390515] wlp6s0: send auth to 00:19:70:89:1a:b8 (try 2/3)
[ 59.393036] wlp6s0: authenticated
[ 59.394387] wlp6s0: associate with 00:19:70:89:1a:b8 (try 1/3)
[ 59.398733] wlp6s0: RX AssocResp from 00:19:70:89:1a:b8 (capab=0x431 status=0 aid=4)
[ 59.398875] wlp6s0: associated
[ 59.398895] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[ 59.408294] ath: EEPROM regdomain: 0x80fa
[ 59.408297] ath: EEPROM indicates we should expect a country code
[ 59.408298] ath: doing EEPROM country->regdmn map search
[ 59.408299] ath: country maps to regdmn code: 0x37
[ 59.408300] ath: Country alpha2 being used: FR
[ 59.408301] ath: Regpair used: 0x37
[ 59.408303] ath: regdomain 0x80fa dynamically updated by country IE