Bonjour
Presque tout est dans le titre. Je dois installer Handy Linux 2.3 (Basé sur Debian 8.3) sur un portable Packard Bell Easynote ENTG71BM. Seulement, le touchpad n'est pas reconnu en session live. (Je n'ai donc pas encore installé HL en écrasant au passage W$ 10)
Étant une bille dès que je tombe sur une incompatibilité matérielle, je fais appel à vos lumières.
Le matos :
Installation : ante HandyLinux-1.5.1
Version : HandyLinux-2.3-Ian
Kernel : Linux 3.16.0-4-amd64
lspci :
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
00:13.0 SATA controller: Intel Corporation Device 0f23 (rev 0e)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI (rev 0e)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation Device 0f48 (rev 0e)
00:1c.2 PCI bridge: Intel Corporation Device 0f4c (rev 0e)
00:1c.3 PCI bridge: Intel Corporation Device 0f4e (rev 0e)
00:1d.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB EHCI (rev 0e)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
00:1f.3 SMBus: Intel Corporation Device 0f12 (rev 0e)
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
lsusb :
Bus 003 Device 002: ID 8087:07e6 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b47f Chicony Electronics Co., Ltd
Bus 001 Device 007: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 006: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 005: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 001 Device 008: ID 0489:e078 Foxconn / Hon Hai
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Info matériel :
BIOS Information
Vendor: Insyde Corp.
Version: V1.04
Release Date: 07/30/2014
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 3072 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 1.4
Firmware Revision: 1.4
System Information
Manufacturer: Packard Bell
Product Name: Easynote ENTG71BM
Version: V1.04
Serial Number: NXC3UMF0114331B4BA6600
UUID: A15CBE37-98F6-4B46-9BE5-F8F97899AF10
Wake-up Type: Power Switch
SKU Number: EA53_BM_083D_1.04
Family: BayTrail
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Atom
Manufacturer: Intel(R) Corporation
ID: 78 06 03 00 FF FB EB BF
Signature: Type 0, Family 6, Model 55, Stepping 8
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz
Voltage: 0.9 V
External Clock: 83 MHz
Max Speed: 2573 MHz
Current Speed: 2178 MHz
Status: Populated, Enabled
Upgrade: None
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 1
Characteristics:
64-bit capable
Multi-Core
Execute Protection
Enhanced Virtualization
Power/Performance Control
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 0
Current Speed: Unknown
Type: None
Installed Size: 4096 MB (Single-bank Connection)
Enabled Size: 4096 MB (Single-bank Connection)
Error Status: OK
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 0 0
Current Speed: Unknown
Type: None
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
System Configuration Options
Option 1: String1 for Type12 Equipment Manufacturer
Option 2: String2 for Type12 Equipment Manufacturer
Option 3: String3 for Type12 Equipment Manufacturer
Option 4: String4 for Type12 Equipment Manufacturer
BIOS Language Information
Language Description Format: Long
Installable Languages: 4
en|US|iso8859-1
fr|CA|iso8859-1
zh|TW|unicode
ja|JP|unicode
Currently Installed Language: en|US|iso8859-1
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Number Of Devices: 2
Memory Device
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: SODIMM
Set: None
Locator: DIMM0
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: Samsung
Serial Number: 14172316
Asset Tag: Unknown
Part Number: M471B5173DB0-YK0
Rank: Unknown
Configured Clock Speed: 1333 MHz
Memory Device
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: SODIMM
Set: None
Locator: DIMM1
Bank Locator: BANK 1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Unknown
Part Number: Not Specified
Rank: Unknown
Configured Clock Speed: Unknown
Système de fichier :
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
aufs 1,9G 108M 1,8G 6% /
tmpfs 771M 8,8M 762M 2% /run
/dev/sdb1 1,3G 1,3G 0 100% /lib/live/mount/medium
/dev/loop0 1,1G 1,1G 0 100% /lib/live/mount/rootfs/filesystem.squashfs
tmpfs 1,9G 0 1,9G 0% /lib/live/mount/overlay
devtmpfs 10M 0 10M 0% /dev
tmpfs 1,9G 92K 1,9G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 1,9G 0 1,9G 0% /sys/fs/cgroup
tmpfs 1,9G 20K 1,9G 1% /tmp
tmpfs 386M 12K 386M 1% /run/user/1000
/dev/sda4 282G 39G 243G 14% /media/humain/Packard Bell
Partitionnement :
Disk /dev/sda: 298,1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: F9BC562B-48FE-40FE-8153-D10F23789124
Device Start End Sectors Size Type
/dev/sda1 2048 1230847 1228800 600M Windows recovery environment
/dev/sda2 1230848 1845247 614400 300M EFI System
/dev/sda3 1845248 2107391 262144 128M Microsoft reserved
/dev/sda4 2107392 592480255 590372864 281,5G Microsoft basic data
/dev/sda5 592480256 625141759 32661504 15,6G Windows recovery environment
Disk /dev/sdb: 7,6 GiB, 8178892800 bytes, 15974400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x5d807006
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 64 2545919 2545856 1,2G 17 Hidden HPFS/NTFS
Disk /dev/loop0: 1,1 GiB, 1164943360 bytes, 2275280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Réseau :
network/interfaces :
auto lo
iface lo inet loopback
resolv.conf :
# Generated by NetworkManager
nameserver 127.0.0.1
nameserver 2a01:e00::2
nameserver 2a01:e00::1
ifconfig :
eth0 Link encap:Ethernet HWaddr 20:6a:8a:df:bb:46
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:246 errors:0 dropped:0 overruns:0 frame:0
TX packets:246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:20202 (19.7 KiB) TX bytes:20202 (19.7 KiB)
wlan0 Link encap:Ethernet HWaddr ec:0e:c4:41:fc:69
inet adr:192.168.1.2 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::ee0e:c4ff:fe41:fc69/64 Scope:Lien
adr inet6: 2a01:e35:8a4e:e9d0:ee0e:c4ff:fe41:fc69/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4492 errors:0 dropped:0 overruns:0 frame:0
TX packets:3797 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:3852601 (3.6 MiB) TX bytes:488405 (476.9 KiB)
route :
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
0.0.0.0 192.168.1.254 0.0.0.0 UG 1024 0 0 wlan0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
J'ai désespérément tenté une mise à jour vers le noyau des backports mais ça n'a rien changé
Tentative aussi avec Xubuntu 14.04.1 (noyau 3.13) et Xubuntu 14.04.4 (Noyau 4.2 je crois), sans succès non plus.
J'ai initialement ouvert un fil sur le forum HL mais qui ne donne aucune issue jusqu'à présent, donc je multiplie les chances ici https://handylinux.org/forum/viewtopic.php?id=2077
Merci d'avance et bonne soirée !
Dernière modification par Caribou22 (06-04-2016 23:29:15)