[ 0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.0-1-amd64 root=UUID=0a196521-86c6-4c29-8562-366c15f3b026 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dcf39fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dcf3a000-0x00000000dd961fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd962000-0x00000000dd972fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd973000-0x00000000dda9afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dda9b000-0x00000000de7fbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de7fc000-0x00000000de7fcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de7fd000-0x00000000de83ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de840000-0x00000000dec73fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dec74000-0x00000000deff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 2501 07/21/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FF0000000 write-back
[ 0.000000] 2 base 410000000 mask FF8000000 write-back
[ 0.000000] 3 base 418000000 mask FFC000000 write-back
[ 0.000000] 4 base 41C000000 mask FFE000000 write-back
[ 0.000000] 5 base 41E000000 mask FFF000000 write-back
[ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff9780000fd8e0]
[ 0.000000] Base memory trampoline at [ffff978000096000] 96000 size 24576
[ 0.000000] BRK [0x27b754000, 0x27b754fff] PGTABLE
[ 0.000000] BRK [0x27b755000, 0x27b755fff] PGTABLE
[ 0.000000] BRK [0x27b756000, 0x27b756fff] PGTABLE
[ 0.000000] BRK [0x27b757000, 0x27b757fff] PGTABLE
[ 0.000000] BRK [0x27b758000, 0x27b758fff] PGTABLE
[ 0.000000] BRK [0x27b759000, 0x27b759fff] PGTABLE
[ 0.000000] BRK [0x27b75a000, 0x27b75afff] PGTABLE
[ 0.000000] BRK [0x27b75b000, 0x27b75bfff] PGTABLE
[ 0.000000] BRK [0x27b75c000, 0x27b75cfff] PGTABLE
[ 0.000000] BRK [0x27b75d000, 0x27b75dfff] PGTABLE
[ 0.000000] BRK [0x27b75e000, 0x27b75efff] PGTABLE
[ 0.000000] BRK [0x27b75f000, 0x27b75ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35c33000-0x36e10fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD966080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD9710C8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD966188 00AF3B (v02 ALASKA A M I 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DDA99080 000040
[ 0.000000] ACPI: APIC 0x00000000DD9711D8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD971270 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DD9712B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD9712F8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD971330 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD972BC0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DD9716F8 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DD9720A8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 0x00000000DD972B40 000080 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41efee000-0x41eff2fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dcf39fff]
[ 0.000000] node 0: [mem 0x00000000de7fc000-0x00000000de7fcfff]
[ 0.000000] node 0: [mem 0x00000000de840000-0x00000000dec73fff]
[ 0.000000] node 0: [mem 0x00000000deff4000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[ 0.000000] On node 0 totalpages: 4178710
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14094 pages used for memmap
[ 0.000000] DMA32 zone: 902011 pages, LIFO batch:31
[ 0.000000] Normal zone: 51136 pages used for memmap
[ 0.000000] Normal zone: 3272704 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcf3a000-0xdd961fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd962000-0xdd972fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd973000-0xdda9afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdda9b000-0xde7fbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde7fd000-0xde83ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdec74000-0xdeff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff97841ec00000 s114776 r8192 d32680 u262144
[ 0.000000] pcpu-alloc: s114776 r8192 d32680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4113395
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.0-1-amd64 root=UUID=0a196521-86c6-4c29-8562-366c15f3b026 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16351268K/16714840K available (6481K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 363572K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28155 entries in 110 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3410.005 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.01 BogoMIPS (lpj=13640020)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170303
[ 0.011055] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.011087] Security Framework initialized
[ 0.011088] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.011091] AppArmor: AppArmor disabled by boot time parameter
[ 0.011639] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013892] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014900] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.014911] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015120] CPU: Physical Processor ID: 0
[ 0.015121] CPU: Processor Core ID: 0
[ 0.015124] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.015124] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.015127] mce: CPU supports 9 MCE banks
[ 0.015134] CPU0: Thermal monitoring enabled (TM1)
[ 0.015141] process: using mwait in idle threads
[ 0.015143] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.015143] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.015232] Freeing SMP alternatives memory: 24K
[ 0.016052] smpboot: Max logical packages: 2
[ 0.016056] DMAR: Host address width 36
[ 0.016057] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.016065] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.016065] DMAR: RMRR base: 0x000000dd8e4000 end: 0x000000dd8f5fff
[ 0.016067] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.016068] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.016068] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.016241] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.016241] x2apic enabled
[ 0.016245] Switched APIC routing to cluster x2apic.
[ 0.016653] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058507] TSC deadline timer enabled
[ 0.058509] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.058558] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.058574] ... version: 3
[ 0.058574] ... bit width: 48
[ 0.058575] ... generic registers: 4
[ 0.058575] ... value mask: 0000ffffffffffff
[ 0.058576] ... max period: 00007fffffffffff
[ 0.058576] ... fixed-purpose events: 3
[ 0.058576] ... event mask: 000000070000000f
[ 0.058982] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.058994] smp: Bringing up secondary CPUs ...
[ 0.059060] x86: Booting SMP configuration:
[ 0.059061] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.618018] smp: Brought up 1 node, 8 CPUs
[ 0.618018] smpboot: Total of 8 processors activated (54568.38 BogoMIPS)
[ 0.620122] sched_clock: Marking stable (620000000, 0)->(619568124, 431876)
[ 0.620502] devtmpfs: initialized
[ 0.620541] x86/mm: Memory block size: 128MB
[ 0.622784] PM: Registering ACPI NVS region [mem 0xdd973000-0xdda9afff] (1212416 bytes)
[ 0.622808] PM: Registering ACPI NVS region [mem 0xde7fd000-0xde83ffff] (274432 bytes)
[ 0.622852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.622862] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.622908] pinctrl core: initialized pinctrl subsystem
[ 0.622986] NET: Registered protocol family 16
[ 0.623121] cpuidle: using governor ladder
[ 0.623138] cpuidle: using governor menu
[ 0.623140] PCCT header not found.
[ 0.623165] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.623166] ACPI: bus type PCI registered
[ 0.623167] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.623216] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.623218] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.623223] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.623277] PCI: Using configuration type 1 for base access
[ 0.623313] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.624126] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.624293] ACPI: Added _OSI(Module Device)
[ 0.624294] ACPI: Added _OSI(Processor Device)
[ 0.624294] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.624295] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.624440] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.627411] ACPI: Dynamic OEM Table Load:
[ 0.627416] ACPI: SSDT 0xFFFF97840E117000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.627680] ACPI: Dynamic OEM Table Load:
[ 0.627684] ACPI: SSDT 0xFFFF97840C30E800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.627887] ACPI: Dynamic OEM Table Load:
[ 0.627890] ACPI: SSDT 0xFFFF97840C374200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.629116] ACPI: Interpreter enabled
[ 0.629131] ACPI: (supports S0 S3 S4 S5)
[ 0.629132] ACPI: Using IOAPIC for interrupt routing
[ 0.629150] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.634546] ACPI: Power Resource [FN00] (off)
[ 0.634608] ACPI: Power Resource [FN01] (off)
[ 0.634667] ACPI: Power Resource [FN02] (off)
[ 0.634725] ACPI: Power Resource [FN03] (off)
[ 0.634783] ACPI: Power Resource [FN04] (off)
[ 0.635217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.635221] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.635394] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.635498] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.635499] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.635843] PCI host bridge to bus 0000:00
[ 0.635845] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.635846] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.635847] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.635848] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.635849] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.635849] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.635850] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.635851] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.635852] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.635853] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.635858] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.635929] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.635953] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.635992] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.636041] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.636058] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.636122] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.636162] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.636188] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.636206] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
[ 0.636272] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.636341] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.636356] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
[ 0.636433] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.636484] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.636510] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.636526] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.636591] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.636636] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.636661] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.636731] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.636777] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.636804] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.636874] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.636919] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.636943] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[ 0.637013] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.637057] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.637082] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[ 0.637153] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.637198] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.637223] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[ 0.637294] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.637338] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.637363] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.637379] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[ 0.637455] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.637505] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.637531] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.637683] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.637695] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.637702] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.637708] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.637714] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.637720] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.637726] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
[ 0.637761] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.637820] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.637833] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[ 0.637851] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.637951] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.637963] pci 0000:01:00.0: reg 0x10: [mem 0xf7e00000-0xf7e00fff 64bit]
[ 0.638012] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648036] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.648040] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.648131] pci 0000:02:00.0: [1002:699f] type 00 class 0x030000
[ 0.648174] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.648192] pci 0000:02:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.648204] pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.648215] pci 0000:02:00.0: reg 0x24: [mem 0xf7d00000-0xf7d3ffff]
[ 0.648227] pci 0000:02:00.0: reg 0x30: [mem 0xf7d40000-0xf7d5ffff pref]
[ 0.648348] pci 0000:02:00.0: supports D1 D2
[ 0.648349] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.648413] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.648448] pci 0000:02:00.1: [1002:aae0] type 00 class 0x040300
[ 0.648481] pci 0000:02:00.1: reg 0x10: [mem 0xf7d60000-0xf7d63fff 64bit]
[ 0.648626] pci 0000:02:00.1: supports D1 D2
[ 0.660073] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.660077] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.660081] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.660087] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.660161] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.660188] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.660220] pci 0000:03:00.0: reg 0x18: [mem 0xf0304000-0xf0304fff 64bit pref]
[ 0.660240] pci 0000:03:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
[ 0.660353] pci 0000:03:00.0: supports D1 D2
[ 0.660354] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.660401] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.672060] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.672064] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.672073] pci 0000:00:1c.4: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.672148] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.672274] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.672294] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.672299] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.672304] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.672305] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.672306] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.672307] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.672307] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.672308] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.672309] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.672310] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.672311] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.672363] pci 0000:05:02.0: [1033:0035] type 00 class 0x0c0310
[ 0.672390] pci 0000:05:02.0: reg 0x10: [mem 0xf7c02000-0xf7c02fff]
[ 0.672539] pci 0000:05:02.0: supports D1 D2
[ 0.672540] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.672582] pci 0000:05:02.1: [1033:0035] type 00 class 0x0c0310
[ 0.672609] pci 0000:05:02.1: reg 0x10: [mem 0xf7c01000-0xf7c01fff]
[ 0.672759] pci 0000:05:02.1: supports D1 D2
[ 0.672759] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.672802] pci 0000:05:02.2: [1033:00e0] type 00 class 0x0c0320
[ 0.672829] pci 0000:05:02.2: reg 0x10: [mem 0xf7c00000-0xf7c000ff]
[ 0.672979] pci 0000:05:02.2: supports D1 D2
[ 0.672979] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.673083] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.673095] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.673104] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[ 0.673105] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.673106] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.673107] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.673107] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.673108] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.673109] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.673110] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.673111] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.673112] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.673179] pci 0000:06:00.0: [104c:8241] type 00 class 0x0c0330
[ 0.673208] pci 0000:06:00.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff 64bit]
[ 0.673226] pci 0000:06:00.0: reg 0x18: [mem 0xf7b10000-0xf7b11fff 64bit]
[ 0.673341] pci 0000:06:00.0: supports D1 D2
[ 0.673342] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.673378] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.684064] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.684071] pci 0000:00:1c.6: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.684155] pci 0000:07:00.0: [1b4b:9215] type 00 class 0x010601
[ 0.684175] pci 0000:07:00.0: reg 0x10: [io 0xc050-0xc057]
[ 0.684187] pci 0000:07:00.0: reg 0x14: [io 0xc040-0xc043]
[ 0.684198] pci 0000:07:00.0: reg 0x18: [io 0xc030-0xc037]
[ 0.684209] pci 0000:07:00.0: reg 0x1c: [io 0xc020-0xc023]
[ 0.684220] pci 0000:07:00.0: reg 0x20: [io 0xc000-0xc01f]
[ 0.684232] pci 0000:07:00.0: reg 0x24: [mem 0xf7a10000-0xf7a107ff]
[ 0.684243] pci 0000:07:00.0: reg 0x30: [mem 0xf7a00000-0xf7a0ffff pref]
[ 0.684313] pci 0000:07:00.0: PME# supported from D3hot
[ 0.684345] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.696065] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.696070] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.696074] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.696475] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.696515] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.696553] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.696592] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.696630] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.696668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.696705] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
[ 0.696742] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.696931] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.697002] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[ 0.697003] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.697004] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.697005] vgaarb: loaded
[ 0.697035] EDAC MC: Ver: 3.0.0
[ 0.697157] PCI: Using ACPI for IRQ routing
[ 0.698497] PCI: pci_cache_line_size set to 64 bytes
[ 0.698566] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.698567] e820: reserve RAM buffer [mem 0xdcf3a000-0xdfffffff]
[ 0.698567] e820: reserve RAM buffer [mem 0xde7fd000-0xdfffffff]
[ 0.698568] e820: reserve RAM buffer [mem 0xdec74000-0xdfffffff]
[ 0.698569] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.698570] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[ 0.698665] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.698669] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.700687] clocksource: Switched to clocksource hpet
[ 0.706917] VFS: Disk quotas dquot_6.6.0
[ 0.706937] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.706998] pnp: PnP ACPI init
[ 0.707082] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.707085] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.707145] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.707146] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.707147] system 00:01: [io 0xffff] has been reserved
[ 0.707148] system 00:01: [io 0xffff] has been reserved
[ 0.707149] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.707150] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.707151] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.707152] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.707154] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.707173] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.707212] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.707213] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.707279] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.707281] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.707321] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.707323] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.707484] pnp 00:06: [dma 0 disabled]
[ 0.707518] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.707672] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.707673] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.707674] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.707675] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.707676] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.707677] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.707679] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.707680] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.707681] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.707682] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.707683] system 00:07: [mem 0xf0400000-0xf0400fff] has been reserved
[ 0.707684] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.707776] pnp: PnP ACPI: found 8 devices
[ 0.713574] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.713627] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.713629] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.713632] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.713634] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.713637] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.713640] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.713645] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.713647] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.713652] pci 0000:00:1c.4: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.713657] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.713664] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.713676] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[ 0.713680] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.713686] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.713690] pci 0000:00:1c.6: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.713697] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.713698] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.713702] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.713709] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.713710] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.713711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.713712] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.713713] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.713714] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.713715] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.713715] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.713716] pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff window]
[ 0.713717] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.713718] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.713719] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.713720] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.713720] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.713721] pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.713722] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.713723] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.713724] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.713725] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.713725] pci_bus 0000:04: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.713726] pci_bus 0000:04: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.713727] pci_bus 0000:04: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.713728] pci_bus 0000:04: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.713729] pci_bus 0000:04: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.713729] pci_bus 0000:04: resource 12 [mem 0xe0000000-0xfeafffff window]
[ 0.713730] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.713731] pci_bus 0000:05: resource 4 [mem 0xf7c00000-0xf7cfffff]
[ 0.713732] pci_bus 0000:05: resource 5 [io 0x0000-0x0cf7 window]
[ 0.713733] pci_bus 0000:05: resource 6 [io 0x0d00-0xffff window]
[ 0.713733] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff window]
[ 0.713734] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.713735] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.713736] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.713736] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.713737] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.713738] pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.713739] pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.713740] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.713741] pci_bus 0000:07: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.713811] NET: Registered protocol family 2
[ 0.713948] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.714106] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.714218] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.714246] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.714285] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.714348] NET: Registered protocol family 1
[ 0.760910] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.760913] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.761368] Unpacking initramfs...
[ 0.993989] Freeing initrd memory: 18296K
[ 0.994034] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.994036] software IO TLB [mem 0xd8f3a000-0xdcf3a000] (64MB) mapped at [ffff9780d8f3a000-ffff9780dcf39fff]
[ 0.994370] audit: initializing netlink subsys (disabled)
[ 0.994417] audit: type=2000 audit(1505415086.993:1): state=initialized audit_enabled=0 res=1
[ 0.994641] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.994693] zbud: loaded
[ 1.267065] Key type asymmetric registered
[ 1.267066] Asymmetric key parser 'x509' registered
[ 1.267075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.267100] io scheduler noop registered
[ 1.267101] io scheduler deadline registered
[ 1.267107] io scheduler cfq registered (default)
[ 1.267108] io scheduler mq-deadline registered
[ 1.267593] intel_idle: MWAIT substates: 0x1120
[ 1.267593] intel_idle: v0.4.1 model 0x2A
[ 1.267780] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.267913] GHES: HEST is not enabled!
[ 1.267950] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.288427] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.288708] Linux agpgart interface v0.103
[ 1.288757] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.288758] AMD IOMMUv2 functionality not available on this system
[ 1.289197] i8042: PNP: No PS/2 controller found.
[ 1.289238] mousedev: PS/2 mouse device common for all mice
[ 1.289260] rtc_cmos 00:02: RTC can wake from S4
[ 1.289365] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.289391] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.289397] intel_pstate: Intel P-state driver initializing
[ 1.289624] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.290321] NET: Registered protocol family 10
[ 1.290596] Segment Routing with IPv6
[ 1.290614] mip6: Mobile IPv6
[ 1.290616] NET: Registered protocol family 17
[ 1.290619] mpls_gso: MPLS GSO support
[ 1.291325] microcode: sig=0x206a7, pf=0x2, revision=0x28
[ 1.291552] microcode: Microcode Update Driver: v2.2.
[ 1.291742] registered taskstats version 1
[ 1.291769] zswap: loaded using pool lzo/zbud
[ 1.292009] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.292460] rtc_cmos 00:02: setting system clock to 2017-09-14 18:51:27 UTC (1505415087)
[ 1.292523] PM: Hibernation image not present or could not be loaded.
[ 1.294976] Freeing unused kernel memory: 1468K
[ 1.294977] Write protecting the kernel read-only data: 12288k
[ 1.295666] Freeing unused kernel memory: 1696K
[ 1.299819] Freeing unused kernel memory: 1188K
[ 1.301425] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.349007] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.349244] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.349245] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.349526] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.349527] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.350295] ACPI: bus type USB registered
[ 1.350318] usbcore: registered new interface driver usbfs
[ 1.350331] usbcore: registered new interface driver hub
[ 1.350360] usbcore: registered new device driver usb
[ 1.350432] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.350442] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.350768] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.351155] ehci-pci: EHCI PCI platform driver
[ 1.351300] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffa4f9818c5000, d8:50:e6:53:68:c4, XID 08000800 IRQ 26
[ 1.351301] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.351302] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.351310] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.351321] ehci-pci 0000:00:1a.0: debug port 2
[ 1.351470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.352027] SCSI subsystem initialized
[ 1.353152] libata version 3.00 loaded.
[ 1.355148] AVX version of gcm_enc/dec engaged.
[ 1.355149] AES CTR mode by8 optimization enabled
[ 1.355224] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.355241] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7f18000
[ 1.365193] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.368704] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.368838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.368839] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368840] usb usb1: Product: EHCI Host Controller
[ 1.368841] usb usb1: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 1.368842] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.368988] hub 1-0:1.0: USB hub found
[ 1.369000] hub 1-0:1.0: 2 ports detected
[ 1.369303] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.369308] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.369319] ehci-pci 0000:00:1d.0: debug port 2
[ 1.373226] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.373231] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
[ 1.388762] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.388811] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.388813] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.388814] usb usb2: Product: EHCI Host Controller
[ 1.388816] usb usb2: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 1.388817] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.389073] hub 2-0:1.0: USB hub found
[ 1.389082] hub 2-0:1.0: 2 ports detected
[ 1.389681] ehci-pci 0000:05:02.2: EHCI Host Controller
[ 1.389691] ehci-pci 0000:05:02.2: new USB bus registered, assigned bus number 3
[ 1.389776] ehci-pci 0000:05:02.2: irq 17, io mem 0xf7c00000
[ 1.404752] ehci-pci 0000:05:02.2: USB 2.0 started, EHCI 1.00
[ 1.404816] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.404819] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404820] usb usb3: Product: EHCI Host Controller
[ 1.404822] usb usb3: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 1.404824] usb usb3: SerialNumber: 0000:05:02.2
[ 1.405051] hub 3-0:1.0: USB hub found
[ 1.405061] hub 3-0:1.0: 5 ports detected
[ 1.405280] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.405292] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.405798] ohci-pci: OHCI PCI platform driver
[ 1.405924] ohci-pci 0000:05:02.0: OHCI PCI host controller
[ 1.405933] ohci-pci 0000:05:02.0: new USB bus registered, assigned bus number 5
[ 1.405975] ohci-pci 0000:05:02.0: irq 19, io mem 0xf7c02000
[ 1.406388] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.406394] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.406500] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.406502] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.406503] usb usb4: Product: xHCI Host Controller
[ 1.406505] usb usb4: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.406506] usb usb4: SerialNumber: 0000:00:14.0
[ 1.406713] hub 4-0:1.0: USB hub found
[ 1.406727] hub 4-0:1.0: 4 ports detected
[ 1.407190] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.407195] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 6
[ 1.407240] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.407242] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.407243] usb usb6: Product: xHCI Host Controller
[ 1.407245] usb usb6: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.407246] usb usb6: SerialNumber: 0000:00:14.0
[ 1.407394] hub 6-0:1.0: USB hub found
[ 1.407407] hub 6-0:1.0: 4 ports detected
[ 1.408018] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.408025] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7
[ 1.408083] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.408216] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[ 1.408303] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.408305] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.408307] usb usb7: Product: xHCI Host Controller
[ 1.408308] usb usb7: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.408310] usb usb7: SerialNumber: 0000:01:00.0
[ 1.408439] hub 7-0:1.0: USB hub found
[ 1.408447] hub 7-0:1.0: 1 port detected
[ 1.408532] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.408536] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 8
[ 1.408555] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.408578] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.408580] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.408581] usb usb8: Product: xHCI Host Controller
[ 1.408583] usb usb8: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.408584] usb usb8: SerialNumber: 0000:01:00.0
[ 1.408719] hub 8-0:1.0: USB hub found
[ 1.408730] hub 8-0:1.0: 4 ports detected
[ 1.408745] ahci 0000:00:1f.2: version 3.0
[ 1.408974] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.408980] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
[ 1.409148] xhci_hcd 0000:06:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x04000000
[ 1.409408] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.409410] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.409412] usb usb9: Product: xHCI Host Controller
[ 1.409413] usb usb9: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.409415] usb usb9: SerialNumber: 0000:06:00.0
[ 1.409548] hub 9-0:1.0: USB hub found
[ 1.409559] hub 9-0:1.0: 2 ports detected
[ 1.409670] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.409675] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
[ 1.409699] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.409722] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.409724] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.409726] usb usb10: Product: xHCI Host Controller
[ 1.409727] usb usb10: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.409729] usb usb10: SerialNumber: 0000:06:00.0
[ 1.409872] hub 10-0:1.0: USB hub found
[ 1.409882] hub 10-0:1.0: 2 ports detected
[ 1.419079] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 1.419083] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.453696] scsi host0: ahci
[ 1.454053] scsi host1: ahci
[ 1.454351] scsi host2: ahci
[ 1.454711] scsi host3: ahci
[ 1.454930] scsi host4: ahci
[ 1.455118] scsi host5: ahci
[ 1.455199] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 29
[ 1.455202] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 29
[ 1.455203] ata3: DUMMY
[ 1.455205] ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 29
[ 1.455207] ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 29
[ 1.455207] ata6: DUMMY
[ 1.465516] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.465520] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.466157] scsi host6: ahci
[ 1.466310] scsi host7: ahci
[ 1.466441] scsi host8: ahci
[ 1.466594] scsi host9: ahci
[ 1.466649] ata7: SATA max UDMA/133 abar m2048@0xf7a10000 port 0xf7a10100 irq 38
[ 1.466652] ata8: SATA max UDMA/133 abar m2048@0xf7a10000 port 0xf7a10180 irq 38
[ 1.466654] ata9: SATA max UDMA/133 abar m2048@0xf7a10000 port 0xf7a10200 irq 38
[ 1.466657] ata10: SATA max UDMA/133 abar m2048@0xf7a10000 port 0xf7a10280 irq 38
[ 1.494565] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.494566] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.494567] usb usb5: Product: OHCI PCI host controller
[ 1.494568] usb usb5: Manufacturer: Linux 4.12.0-1-amd64 ohci_hcd
[ 1.494568] usb usb5: SerialNumber: 0000:05:02.0
[ 1.494766] hub 5-0:1.0: USB hub found
[ 1.494778] hub 5-0:1.0: 3 ports detected
[ 1.495020] ohci-pci 0000:05:02.1: OHCI PCI host controller
[ 1.495027] ohci-pci 0000:05:02.1: new USB bus registered, assigned bus number 11
[ 1.495065] ohci-pci 0000:05:02.1: irq 16, io mem 0xf7c01000
[ 1.582548] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.582549] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.582550] usb usb11: Product: OHCI PCI host controller
[ 1.582551] usb usb11: Manufacturer: Linux 4.12.0-1-amd64 ohci_hcd
[ 1.582551] usb usb11: SerialNumber: 0000:05:02.1
[ 1.582772] hub 11-0:1.0: USB hub found
[ 1.582781] hub 11-0:1.0: 2 ports detected
[ 1.716735] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.720740] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.732712] usb 7-1: new high-speed USB device number 2 using xhci_hcd
[ 1.736737] usb 9-2: new high-speed USB device number 2 using xhci_hcd
[ 1.767592] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.767616] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.767640] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.767660] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.768190] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.768277] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff97840e134500), AE_NOT_FOUND (20170303/psparse-543)
[ 1.768414] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.768498] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff97840e134370), AE_NOT_FOUND (20170303/psparse-543)
[ 1.768599] ata1.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 1.768601] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.768743] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.768745] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.769217] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.769300] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff97840e134370), AE_NOT_FOUND (20170303/psparse-543)
[ 1.769449] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.769534] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff97840e134500), AE_NOT_FOUND (20170303/psparse-543)
[ 1.769724] ata2.00: configured for UDMA/133
[ 1.769820] ata1.00: configured for UDMA/133
[ 1.770164] scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 1.775716] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.775803] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff97840e134b18), AE_NOT_FOUND (20170303/psparse-543)
[ 1.775900] ata5.00: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133
[ 1.775942] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.776023] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff97840e134078), AE_NOT_FOUND (20170303/psparse-543)
[ 1.776112] ata4.00: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133
[ 1.779681] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.779784] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff97840e134b18), AE_NOT_FOUND (20170303/psparse-543)
[ 1.779894] ata5.00: configured for UDMA/133
[ 1.779944] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
[ 1.780046] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff97840e134078), AE_NOT_FOUND (20170303/psparse-543)
[ 1.780157] ata4.00: configured for UDMA/133
[ 1.809253] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.810216] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.810219] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.810249] sd 0:0:0:0: [sda] Write Protect is off
[ 1.810254] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.810311] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.861139] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.861142] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.861227] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.861229] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.861359] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.865067] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.865070] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.865399] hub 2-1:1.0: USB hub found
[ 1.865629] hub 2-1:1.0: 8 ports detected
[ 1.869054] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.869055] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.869508] hub 1-1:1.0: USB hub found
[ 1.869668] hub 1-1:1.0: 6 ports detected
[ 1.869696] scsi 3:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5
[ 1.874048] usb 7-1: New USB device found, idVendor=2109, idProduct=3431
[ 1.874049] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.874050] usb 7-1: Product: USB2.0 Hub
[ 1.874455] hub 7-1:1.0: USB hub found
[ 1.874560] hub 7-1:1.0: 4 ports detected
[ 1.883465] usb 9-2: New USB device found, idVendor=07ca, idProduct=7252
[ 1.883467] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.883469] usb 9-2: Product: AVerMedia C725B PCIe Capture
[ 1.883470] usb 9-2: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[ 1.883472] usb 9-2: SerialNumber: 201117300042
[ 1.896549] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5
[ 1.897220] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 1.897809] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.914689] sdb: sdb1 sdb2
[ 1.915473] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.917879] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.917880] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.918009] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.937978] sr 4:0:0:0: [sr1] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.938121] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 1.940724] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.940747] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.940770] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.940800] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.941264] ata10.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
[ 1.941267] ata10.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.941419] ata7.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133
[ 1.941421] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.941432] ata8.00: ATA-8: ST2000DM001-1CH164, CC24, max UDMA/133
[ 1.941433] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.941922] ata7.00: configured for UDMA/133
[ 1.941944] ata10.00: configured for UDMA/133
[ 1.942065] ata8.00: configured for UDMA/133
[ 1.942112] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5
[ 1.942235] ata9.00: ATA-10: ST4000VM000-2AF166, SC11, max UDMA/133
[ 1.942236] ata9.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.943374] ata9.00: configured for UDMA/133
[ 1.972719] usb 11-2: new full-speed USB device number 2 using ohci-pci
[ 1.973400] random: fast init done
[ 1.993217] sd 6:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.993220] sd 6:0:0:0: [sdc] 4096-byte physical blocks
[ 1.993289] scsi 7:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 1.993291] sd 6:0:0:0: [sdc] Write Protect is off
[ 1.993294] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.993415] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.012705] tsc: Refined TSC clocksource calibration: 3410.013 MHz
[ 2.012714] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3127418e06e, max_idle_ns: 440795285561 ns
[ 2.029828] sdc: sdc1
[ 2.030780] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 2.033230] sd 7:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2.033233] sd 7:0:0:0: [sdd] 4096-byte physical blocks
[ 2.033303] sd 7:0:0:0: [sdd] Write Protect is off
[ 2.033306] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.033341] scsi 8:0:0:0: Direct-Access ATA ST4000VM000-2AF1 SC11 PQ: 0 ANSI: 5
[ 2.033410] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.085180] sd 8:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 2.085184] sd 8:0:0:0: [sde] 4096-byte physical blocks
[ 2.085241] scsi 9:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
[ 2.085252] sd 8:0:0:0: [sde] Write Protect is off
[ 2.085255] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.085359] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.102415] sdd: sdd1 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 >
[ 2.103311] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 2.124941] sd 9:0:0:0: [sdf] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 2.124943] sd 9:0:0:0: [sdf] 4096-byte physical blocks
[ 2.124951] sd 9:0:0:0: [sdf] Write Protect is off
[ 2.124952] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 2.124960] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.127018] sde: sde1
[ 2.127678] sd 8:0:0:0: [sde] Attached SCSI removable disk
[ 2.152725] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.156744] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.172699] sdf: sdf1
[ 2.172872] sd 9:0:0:0: [sdf] Attached SCSI removable disk
[ 2.197669] usb 11-2: New USB device found, idVendor=0d8c, idProduct=013a
[ 2.197670] usb 11-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.197671] usb 11-2: Product: USB PnP Sound Device
[ 2.197671] usb 11-2: Manufacturer: C-Media Electronics Inc.
[ 2.201807] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.206712] usbcore: registered new interface driver usbhid
[ 2.206712] usbhid: USB HID core driver
[ 2.207133] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/0000:05:02.1/usb11/11-2/11-2:1.3/0003:0D8C:013A.0001/input/input0
[ 2.264843] hid-generic 0003:0D8C:013A.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:05:02.1-2/input3
[ 2.267572] usb 1-1.1: New USB device found, idVendor=058f, idProduct=9520
[ 2.267574] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.267575] usb 1-1.1: Product: EMV Smartcard Reader
[ 2.267576] usb 1-1.1: Manufacturer: Generic
[ 2.326561] random: crng init done
[ 2.344714] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.454927] usb 1-1.2: New USB device found, idVendor=058f, idProduct=6362
[ 2.454928] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.454929] usb 1-1.2: Product: Mass Storage Device
[ 2.454930] usb 1-1.2: Manufacturer: Generic
[ 2.454930] usb 1-1.2: SerialNumber: 058F63626420
[ 2.456189] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 2.456268] scsi host10: usb-storage 1-1.2:1.0
[ 2.456312] usbcore: registered new interface driver usb-storage
[ 2.456511] usbcore: registered new interface driver uas
[ 2.459653] usb 2-1.5: New USB device found, idVendor=03f0, idProduct=e807
[ 2.459654] usb 2-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 2.459655] usb 2-1.5: Product: HP Webcam HD 4310
[ 2.459655] usb 2-1.5: Manufacturer: Hewlett Packard
[ 2.466847] hid-generic 0003:03F0:E807.0002: hiddev0,hidraw1: USB HID v1.11 Device [Hewlett Packard HP Webcam HD 4310] on usb-0000:00:1d.0-1.5/input4
[ 2.544745] usb 2-1.7: new full-speed USB device number 4 using ehci-pci
[ 2.656552] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c52b
[ 2.656553] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.656554] usb 2-1.7: Product: USB Receiver
[ 2.656554] usb 2-1.7: Manufacturer: Logitech
[ 2.663257] logitech-djreceiver 0003:046D:C52B.0005: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2
[ 2.797648] input: Logitech M310 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0005/0003:046D:1024.0006/input/input1
[ 2.797864] logitech-hidpp-device 0003:046D:1024.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M310] on usb-0000:00:1d.0-1.7:1
[ 2.799736] input: Logitech K520 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0005/0003:046D:2011.0007/input/input2
[ 2.800010] logitech-hidpp-device 0003:046D:2011.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:1d.0-1.7:2
[ 2.822768] PM: Starting manual resume from disk
[ 2.822773] PM: Hibernation image partition 8:56 present
[ 2.822774] PM: Looking for hibernation image.
[ 2.823105] PM: Image not found (code -22)
[ 2.823107] PM: Hibernation image not present or could not be loaded.
[ 2.944723] usb 5-3: new full-speed USB device number 2 using ohci-pci
[ 3.036919] clocksource: Switched to clocksource tsc
[ 3.093446] EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: (null)
[ 3.170724] usb 5-3: New USB device found, idVendor=0c76, idProduct=1605
[ 3.170727] usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.170728] usb 5-3: Product: USB Audio Controller
[ 3.179883] input: USB Audio Controller as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/0000:05:02.0/usb5/5-3/5-3:1.3/0003:0C76:1605.0008/input/input3
[ 3.236795] hid-generic 0003:0C76:1605.0008: input,hidraw5: USB HID v1.00 Device [USB Audio Controller] on usb-0000:05:02.0-3/input3
[ 3.485902] scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.486624] scsi 10:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.487314] scsi 10:0:0:2: Direct-Access Generic- SM/xD Picture 1.02 PQ: 0 ANSI: 0
[ 3.487999] scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 3.494056] sd 10:0:0:0: [sdg] Attached SCSI removable disk
[ 3.494681] sd 10:0:0:1: [sdh] Attached SCSI removable disk
[ 3.495296] sd 10:0:0:2: [sdi] Attached SCSI removable disk
[ 3.495913] sd 10:0:0:3: [sdj] Attached SCSI removable disk
[ 3.922013] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 4.031699] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.063528] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 4.063647] systemd[1]: Detected architecture x86-64.
[ 4.073807] systemd[1]: Set hostname to <Alain-Buster-PC>.
[ 4.900318] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.900371] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.900412] systemd[1]: Listening on Journal Audit Socket.
[ 4.900431] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.900455] systemd[1]: Listening on udev Control Socket.
[ 4.900476] systemd[1]: Listening on Journal Socket.
[ 4.900575] systemd[1]: Created slice System Slice.
[ 5.331480] lp: driver loaded but no devices found
[ 5.333680] ppdev: user-space parallel port driver
[ 5.411831] EXT4-fs (sdd10): re-mounted. Opts: errors=remount-ro
[ 5.525788] systemd-journald[331]: Received request to flush runtime journal from PID 1
[ 6.696411] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.696414] ACPI: Power Button [PWRB]
[ 6.696449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.696450] ACPI: Power Button [PWRF]
[ 6.874890] wmi: Mapper loaded
[ 6.949758] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.967852] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 6.967853] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.967853] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.967854] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 7.074591] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170303/utaddress-247)
[ 7.074595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.074597] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247)
[ 7.074599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.074599] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247)
[ 7.074601] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.074601] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247)
[ 7.074603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.074603] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.169144] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.169170] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.169189] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 7.169209] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 7.169229] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 7.169248] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 7.169266] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 7.169285] sd 9:0:0:0: Attached scsi generic sg7 type 0
[ 7.169304] sd 10:0:0:0: Attached scsi generic sg8 type 0
[ 7.169323] sd 10:0:0:1: Attached scsi generic sg9 type 0
[ 7.169342] sd 10:0:0:2: Attached scsi generic sg10 type 0
[ 7.169360] sd 10:0:0:3: Attached scsi generic sg11 type 0
[ 7.300592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.589824] [drm] amdgpu kernel modesetting enabled.
[ 7.754007] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.754009] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.754010] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.754011] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.754012] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 7.754012] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.754014] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.754015] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.754015] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.765882] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.765922] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.765956] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.765988] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.766022] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.766602] CRAT table not found
[ 7.766603] Finished initializing topology ret=0
[ 7.766616] kfd kfd: Initialized module
[ 7.766877] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1DA2:0xE367 0xC7).
[ 7.766879] amdgpu 0000:02:00.0: VM size (-1) must be a power of 2
[ 7.766891] [drm] register mmio base: 0xF7D00000
[ 7.766892] [drm] register mmio size: 262144
[ 7.766904] [drm] probing gen 2 caps for device 8086:1e10 = 1123c42/0
[ 7.766905] [drm] probing mlw for device 8086:1e10 = 1123c42
[ 7.766915] [drm] UVD is enabled in VM mode
[ 7.766916] [drm] VCE enabled in VM mode
[ 7.819678] [drm] BIOS signature incorrect 5b 7
[ 7.819681] amdgpu 0000:02:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[ 7.819778] ATOM BIOS: 113-3674M-UO3
[ 7.819786] [drm] GPU post is not needed
[ 7.819902] [drm] vm size is 64 GB, block size is 13-bit
[ 7.841481] amdgpu 0000:02:00.0: firmware: failed to load amdgpu/polaris12_mc.bin (-2)
[ 7.841564] amdgpu 0000:02:00.0: Direct firmware load for amdgpu/polaris12_mc.bin failed with error -2
[ 7.841566] mc: Failed to load firmware "amdgpu/polaris12_mc.bin"
[ 7.841667] [drm:gmc_v8_0_sw_init [amdgpu]] *ERROR* Failed to load mc firmware!
[ 7.841761] [drm:amdgpu_device_init [amdgpu]] *ERROR* sw_init of IP block <gmc_v8_0> failed -2
[ 7.841840] amdgpu 0000:02:00.0: amdgpu_init failed
[ 7.841912] amdgpu 0000:02:00.0: Fatal error during GPU init
[ 7.841985] [drm] amdgpu: finishing device.
[ 7.841986] [TTM] Memory type 2 has not been initialized
[ 7.889258] media: Linux media interface: v0.10
[ 7.924879] amdgpu: probe of 0000:02:00.0 failed with error -2
[ 7.925020] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 7.925022] snd_hda_intel 0000:02:00.1: Force to non-snoop mode
[ 7.944957] Linux video capture interface: v2.00
[ 8.033841] intel_rapl: Found RAPL domain package
[ 8.033842] intel_rapl: Found RAPL domain core
[ 8.033843] intel_rapl: Found RAPL domain uncore
[ 8.033847] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 8.155279] uvcvideo: Found UVC 1.00 device HP Webcam HD 4310 (03f0:e807)
[ 8.162919] iTCO_vendor_support: vendor-support=0
[ 8.166784] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ 8.166785] uvcvideo 2-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[ 8.166786] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.166843] input: HP Webcam HD 4310 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12
[ 8.166883] usbcore: registered new interface driver uvcvideo
[ 8.166883] USB Video Class driver (1.1.1)
[ 8.239153] usbcore: registered new interface driver snd-usb-audio
[ 8.287616] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card2/input13
[ 8.287691] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card2/input14
[ 8.287773] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card2/input15
[ 8.287855] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card2/input16
[ 8.287936] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card2/input17
[ 8.495524] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.495580] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.495717] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.553621] asus_wmi: ASUS WMI generic driver loaded
[ 8.645678] Adding 16713724k swap on /dev/sda7. Priority:-1 extents:1 across:16713724k FS
[ 8.696583] asus_wmi: Initialization: 0x0
[ 8.696601] asus_wmi: BIOS WMI version: 0.9
[ 8.696626] asus_wmi: SFUN value: 0x0
[ 8.696875] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input18
[ 8.696936] asus_wmi: Number of fans: 1
[ 8.909113] Adding 33554428k swap on /dev/sdd8. Priority:-2 extents:1 across:33554428k FS
[ 14.736857] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 14.759394] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[ 14.871654] r8169 0000:03:00.0 enp3s0: link down
[ 14.871671] r8169 0000:03:00.0 enp3s0: link down
[ 14.871713] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 17.670827] r8169 0000:03:00.0 enp3s0: link up
[ 17.670837] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 35.691432] logitech-hidpp-device 0003:046D:1024.0006: HID++ 1.0 device connected.
[ 39.627449] logitech-hidpp-device 0003:046D:2011.0007: HID++ 1.0 device connected.
[ 43.154074] fuse init (API version 7.26)
[ 48.845535] EXT4-fs (sdd9): mounted filesystem with ordered data mode. Opts: (null)
[ 49.112401] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null)
[ 49.137638] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)
[ 49.370504] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null)
[ 3609.091070] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
