[Résolu] HDD externe non déctecté

saxoalex · 24-10-2018 01:58:00

Bonjour,
Mon disque externe n'est pas détecté lorsque je le connecte. C'est un DD USB3. Aucun de mes gestionnaire de disques (WS ou Debian) ne le voient et la commande fdisk -l ne m'affiche pas mon disque. Le câble fonctionne avec un autre disque et le port USB est fonctionnel également.. Je pense à un problème de connectique au niveau du disque, mais je ne suis pas sûr.

Mon disque, lorsqu'il est branché, tourne (led allumée, effet gyroscopique notable).

Si vous pouviez m'aider, je vous en serai très reconnaissant.

Dernière modification par saxoalex (26-10-2018 01:03:32)

raleur · 24-10-2018 06:23:40

Qu'est-ce que WS ?
Port USB 2 ou USB 3 ?
Tu as regardé les logs du noyau avec dmesg après le branchement du disque ?
Tu as comparé la sortie de lsusb avant et après ?

saxoalex · 24-10-2018 16:35:26

Je n'ai pas ms de "$", ais WS = Windows !
Porte USB3. Je n'ai pas regardé les logs.
J'ai comparé avant et après, et ça marche avec un autre disque externe.

raleur · 24-10-2018 16:51:05

saxoalex a écrit :

J'ai comparé avant et après

Et donc, une différence ?

empanada · 24-10-2018 17:30:01

saxoalex a écrit :

J'ai comparé avant et après, et ça marche avec un autre disque externe.

Mais c'est un disque USB3 aussi?
Comme dit plus haut, il faut info de dmesg, lsusb...

saxoalex · 24-10-2018 22:24:40

Vous allez dire que je suis con, et ce serait légitime, mais j'ai reessayé sur un autre Debian et ça a marché (port USB2). Alors c'est peut être ma machine qui a eu un problème... Pour la forme :

lsusb

Bus 001 Device 004: ID 174c:1153 ASMedia Technology Inc. ASM2115 SATA 6Gb/s bridge

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 003: ID 0461:0010 Primax Electronics, Ltd HP PR1101U / Primax PMX-KPR1101U Keyboard

Bus 002 Device 002: ID 0461:4d22 Primax Electronics, Ltd 

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg

[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=ec2c60ad-54a3-4d2b-98e7-e4830f933860 ro quiet

[    0.000000] x86/fpu: Legacy x87 FPU detected.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e9e00-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffc6fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000dffc7000-0x00000000dfffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.5 present.

[    0.000000] DMI: Hewlett-Packard HP xw9400 Workstation/0A1Ch, BIOS 786D6 v02.21 06/25/2007

[    0.000000] Kernel/User page tables isolation: disabled

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] AGP: No AGP bridge found

[    0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-E7FFF write-protect                                                                                                                                                                       

[    0.000000]   E8000-EFFFF write-back                                                                                                                                                                          

[    0.000000]   F0000-FFFFF write-protect                                                                                                                                                                       

[    0.000000] MTRR variable ranges enabled:                                                                                                                                                                     

[    0.000000]   0 base 0000000000 mask FF80000000 write-back                                                                                                                                                    

[    0.000000]   1 base 0080000000 mask FFC0000000 write-back                                                                                                                                                    

[    0.000000]   2 base 00C0000000 mask FFE0000000 write-back                                                                                                                                                    

[    0.000000]   3 disabled                                                                                                                                                                                      

[    0.000000]   4 disabled                                                                                                                                                                                      

[    0.000000]   5 disabled                                                                                                                                                                                      

[    0.000000]   6 disabled                                                                                                                                                                                      

[    0.000000]   7 disabled                                                                                                                                                                                      

[    0.000000] TOM2: 0000000220000000 aka 8704M                                                                                                                                                                  

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT                                                                                                                                      

[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved                                                                                                                                      

[    0.000000] e820: last_pfn = 0xdffc7 max_arch_pfn = 0x400000000                                                                                                                                               

[    0.000000] found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff9a7e000fe700]                                                                                                                    

[    0.000000] Base memory trampoline at [ffff9a7e00096000] 96000 size 24576                                                                                                                                     

[    0.000000] BRK [0x9933a000, 0x9933afff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x9933b000, 0x9933bfff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x9933c000, 0x9933cfff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x9933d000, 0x9933dfff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x9933e000, 0x9933efff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x9933f000, 0x9933ffff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x99340000, 0x99340fff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x99341000, 0x99341fff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x99342000, 0x99342fff] PGTABLE                                                                                                                                                              

[    0.000000] BRK [0x99343000, 0x99343fff] PGTABLE                                                                                                                                                              

[    0.000000] RAMDISK: [mem 0x35cc9000-0x36e5bfff]                                                                                                                                                              

[    0.000000] ACPI: Early table checksum verification disabled                                                                                                                                                  

[    0.000000] ACPI: RSDP 0x00000000000E9E10 000024 (v02 HP    )                                                                                                                                                 

[    0.000000] ACPI: XSDT 0x00000000DFFCA474 00006C (v01 HPQOEM SLIC-WKS 20070625      00000000)                                                                                                                 

[    0.000000] ACPI: FACP 0x00000000DFFCA61C 0000F4 (v03 HP     COBRA    00000001      00000000)                                                                                                                 

[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160831/tbfadt-603)                                                                                               

[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658)                                                      

[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160831/tbfadt-603)                                                                                                    

[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160831/tbfadt-708)                                                                                       

[    0.000000] ACPI: DSDT 0x00000000DFFCAA92 002159 (v01 HP     DSDT     00000001 MSFT 0100000E)                                                                                                                 

[    0.000000] ACPI: FACS 0x00000000DFFCA200 000040                                                                                                                                                              

[    0.000000] ACPI: FACS 0x00000000DFFCA200 000040                                                                                                                                                              

[    0.000000] ACPI: SSDT 0x00000000DFFCCBEB 00794A (v02 HP     PROJECT  00000001 MSFT 0100000E)                                                                                                                 

[    0.000000] ACPI: APIC 0x00000000DFFCA710 0000A6 (v01 HP     COBRA    00000001      00000000)

[    0.000000] ACPI: ASF! 0x00000000DFFCA7F4 000063 (v32 HP     COBRA    00000001      00000000)

[    0.000000] ACPI: WDRT 0x00000000DFFCA857 000047 (v01 HP     COBRA    00000001      00000000)

[    0.000000] ACPI: SRAT 0x00000000DFFCA2EC 000150 (v02 HP     COBRA    00000001      00000000)

[    0.000000] ACPI: MCFG 0x00000000DFFCA89E 00004C (v01 HP     COBRA    00000001      00000000)

[    0.000000] ACPI: SLIC 0x00000000DFFCA8EA 000176 (v01 HPQOEM SLIC-WKS 00000001      00000000)

[    0.000000] ACPI: TCPA 0x00000000DFFCAA60 000032 (v01 HP     COBRA    00000001      00000000)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0

[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0

[    0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1

[    0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1

[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]

[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x000e8000-0xdfffffff]

[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]

[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x120000000-0x21fffffff]

[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x000e8000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]

[    0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x11fffb000-0x11fffffff]

[    0.000000] NODE_DATA(1) allocated [mem 0x21fff7000-0x21fffbfff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fffffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dffc6fff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fffffff]

[    0.000000]   node   1: [mem 0x0000000120000000-0x000000021fffffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]

[    0.000000] On node 0 totalpages: 1048418

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3995 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 14272 pages used for memmap

[    0.000000]   DMA32 zone: 913351 pages, LIFO batch:31

[    0.000000]   Normal zone: 2048 pages used for memmap

[    0.000000]   Normal zone: 131072 pages, LIFO batch:31

[    0.000000] Initmem setup node 1 [mem 0x0000000120000000-0x000000021fffffff]

[    0.000000] On node 1 totalpages: 1048576

[    0.000000]   Normal zone: 16384 pages used for memmap

[    0.000000]   Normal zone: 1048576 pages, LIFO batch:31

[    0.000000] Nvidia board detected. Ignoring ACPI timer override.

[    0.000000] If you got timer trouble try acpi_use_timer_override

[    0.000000] ACPI: PM-Timer IO Port: 0xf808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23

[    0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xfa200000, GSI 24-47

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e9fff]

[    0.000000] PM: Registered nosave memory: [mem 0x000ea000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xdffc7000-0xdfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]

[    0.000000] e820: [mem 0xe0000000-0xefffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2

[    0.000000] percpu: Embedded 35 pages/cpu @ffff9a7f1bc00000 s105304 r8192 d29864 u524288

[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 2 4 6 [1] 1 3 5 7 

[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 2064205

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=ec2c60ad-54a3-4d2b-98e7-e4830f933860 ro quiet

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] AGP: Checking aperture...

[    0.000000] AGP: No AGP bridge found

[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)

[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole

[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup

[    0.000000] AGP: This costs you 64MB of RAM

[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)

[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]

[    0.000000] Memory: 8090456K/8387976K available (6254K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 297520K reserved, 0K cma-reserved)

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Build-time adjustment of leaf fanout to 64.

[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8

[    0.000000] NR_IRQS:33024 nr_irqs:896 16

[    0.000000] spurious 8259A interrupt: IRQ7.

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 2599.986 MHz processor

[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized

[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.97 BogoMIPS (lpj=10399944)

[    0.004017] pid_max: default: 32768 minimum: 301

[    0.004053] ACPI: Core revision 20160831

[    0.012879] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.012993] Security Framework initialized

[    0.012995] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.013002] AppArmor: AppArmor disabled by boot time parameter

[    0.013745] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.018803] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.021128] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.021146] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.021681] mce: CPU supports 5 MCE banks

[    0.021687] LVT offset 0 assigned for vector 0xf9

[    0.021691] process: using AMD E400 aware idle routine

[    0.021693] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4

[    0.021694] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0

[    0.021696] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline

[    0.021729] Spectre V2 : Mitigation: Full generic retpoline

[    0.021730] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[    0.022002] Freeing SMP alternatives memory: 24K

[    0.023809] ftrace: allocating 25284 entries in 99 pages

[    0.040191] smpboot: Max logical packages: 4

[    0.044749] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1

[    0.088000] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 2218 (family: 0xf, model: 0x41, stepping: 0x3)

[    0.088000] Performance Events: AMD PMU driver.

[    0.088000] ... version:                0

[    0.088000] ... bit width:              48

[    0.088000] ... generic registers:      4

[    0.088000] ... value mask:             0000ffffffffffff

[    0.088000] ... max period:             00007fffffffffff

[    0.088000] ... fixed-purpose events:   0

[    0.088000] ... event mask:             000000000000000f

[    0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.088000] x86: Booting SMP configuration:

[    0.088000] .... node  #1, CPUs:      #1

[    0.164170] .... node  #0, CPUs:   #2

[    0.244230] .... node  #1, CPUs:   #3

[    0.324053] x86: Booted up 2 nodes, 4 CPUs

[    0.324053] smpboot: Total of 4 processors activated (20800.91 BogoMIPS)

[    0.325513] devtmpfs: initialized

[    0.325513] x86/mm: Memory block size: 128MB

[    0.331387] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.331387] futex hash table entries: 2048 (order: 5, 131072 bytes)

[    0.331387] pinctrl core: initialized pinctrl subsystem

[    0.331387] NET: Registered protocol family 16

[    0.344006] cpuidle: using governor ladder

[    0.360005] cpuidle: using governor menu

[    0.360010] node 0 link 2: io port [4000, 4fff]

[    0.360013] node 1 link 0: io port [1000, 3fff]

[    0.360014] node 1 link 0: io port [e000, efff]

[    0.360016] TOM: 00000000e0000000 aka 3584M

[    0.360018] node 1 link 0: mmio [a0000, bffff]

[    0.360020] node 1 link 0: mmio [f4000000, f7ffffff]

[    0.360022] node 1 link 0: mmio [e0000000, efffffff]

[    0.360024] node 1 link 0: mmio [f8000000, fa2fffff]

[    0.360025] node 0 link 2: mmio [fa300000, fa3fffff]

[    0.360027] node 0 link 2: mmio [fa400000, fa5fffff]

[    0.360028] TOM2: 0000000220000000 aka 8704M

[    0.360031] bus: [bus 00-3f] on node 0 link 2

[    0.360032] bus: 00 [io  0x4000-0xdfff]

[    0.360033] bus: 00 [io  0x0000-0x0fff]

[    0.360034] bus: 00 [io  0xf000-0xffff]

[    0.360034] bus: 00 [mem 0xfa300000-0xffffffff]

[    0.360035] bus: 00 [mem 0xf0000000-0xf3ffffff]

[    0.360036] bus: 00 [mem 0x220000000-0xfcffffffff]

[    0.360037] bus: [bus 40-ff] on node 1 link 0

[    0.360038] bus: 40 [io  0x1000-0x3fff]

[    0.360039] bus: 40 [io  0xe000-0xefff]

[    0.360040] bus: 40 [mem 0x000a0000-0x000bffff]

[    0.360040] bus: 40 [mem 0xf4000000-0xfa2fffff]

[    0.360041] bus: 40 [mem 0xe0000000-0xefffffff]

[    0.360071] ACPI: bus type PCI registered

[    0.360073] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.360176] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)

[    0.360178] PCI: MMCONFIG for domain 0001 [bus 40-7f] at [mem 0xf4000000-0xf7ffffff] (base 0xf0000000)

[    0.360180] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820

[    0.360181] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820

[    0.360197] PCI: Using configuration type 1 for base access

[    0.360418] mtrr: your CPUs had inconsistent variable MTRR settings

[    0.360418] mtrr: probably your BIOS does not setup all CPUs.

[    0.360419] mtrr: corrected configuration.

[    0.376054] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.376126] ACPI: Added _OSI(Module Device)

[    0.376128] ACPI: Added _OSI(Processor Device)

[    0.376129] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.376130] ACPI: Added _OSI(Processor Aggregator Device)

[    0.380813] ACPI: Interpreter enabled

[    0.380840] ACPI: (supports S0 S1 S3 S4 S5)

[    0.380842] ACPI: Using IOAPIC for interrupt routing

[    0.380881] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.388047] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])

[    0.388054] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.388060] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[    0.388768] PCI host bridge to bus 0000:00

[    0.388771] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]

[    0.388773] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]

[    0.388774] pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff window]

[    0.388776] pci_bus 0000:00: root bus resource [mem 0xfa300000-0xfa3fffff window]

[    0.388778] pci_bus 0000:00: root bus resource [mem 0xfa400000-0xfa5fffff window]

[    0.388779] pci_bus 0000:00: root bus resource [io  0x4000-0x4fff window]

[    0.388781] pci_bus 0000:00: root bus resource [bus 00-3f]

[    0.388800] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000

[    0.389040] pci 0000:00:01.0: [10de:0364] type 00 class 0x060100

[    0.389065] HPET not enabled in BIOS. You might try hpet=force boot option

[    0.389155] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500

[    0.389178] pci 0000:00:01.1: reg 0x20: [io  0x4000-0x403f]

[    0.389183] pci 0000:00:01.1: reg 0x24: [io  0x4040-0x407f]

[    0.389211] pci 0000:00:01.1: PME# supported from D3hot D3cold

[    0.389319] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310

[    0.389325] pci 0000:00:02.0: reg 0x10: [mem 0xfa344000-0xfa344fff]

[    0.389355] pci 0000:00:02.0: supports D1 D2

[    0.389356] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.389405] pci 0000:00:02.0: System wakeup disabled by ACPI

[    0.389460] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320

[    0.389466] pci 0000:00:02.1: reg 0x10: [mem 0xfa34a000-0xfa34a0ff]

[    0.389495] pci 0000:00:02.1: supports D1 D2

[    0.389496] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.389544] pci 0000:00:02.1: System wakeup disabled by ACPI

[    0.389598] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a

[    0.389612] pci 0000:00:04.0: reg 0x20: [io  0x4080-0x408f]

[    0.389619] pci 0000:00:04.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]

[    0.389621] pci 0000:00:04.0: legacy IDE quirk: reg 0x14: [io  0x03f6]

[    0.389622] pci 0000:00:04.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]

[    0.389624] pci 0000:00:04.0: legacy IDE quirk: reg 0x1c: [io  0x0376]

[    0.389719] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185

[    0.389725] pci 0000:00:05.0: reg 0x10: [io  0x40c0-0x40c7]

[    0.389729] pci 0000:00:05.0: reg 0x14: [io  0x4100-0x4103]

[    0.389732] pci 0000:00:05.0: reg 0x18: [io  0x40c8-0x40cf]

[    0.389736] pci 0000:00:05.0: reg 0x1c: [io  0x4104-0x4107]

[    0.389740] pci 0000:00:05.0: reg 0x20: [io  0x4090-0x409f]

[    0.389744] pci 0000:00:05.0: reg 0x24: [mem 0xfa345000-0xfa345fff]

[    0.389843] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185

[    0.389850] pci 0000:00:05.1: reg 0x10: [io  0x40d0-0x40d7]

[    0.389853] pci 0000:00:05.1: reg 0x14: [io  0x4108-0x410b]

[    0.389857] pci 0000:00:05.1: reg 0x18: [io  0x40d8-0x40df]

[    0.389861] pci 0000:00:05.1: reg 0x1c: [io  0x410c-0x410f]

[    0.389864] pci 0000:00:05.1: reg 0x20: [io  0x40a0-0x40af]

[    0.389868] pci 0000:00:05.1: reg 0x24: [mem 0xfa346000-0xfa346fff]

[    0.389967] pci 0000:00:05.2: [10de:037f] type 00 class 0x010185

[    0.389973] pci 0000:00:05.2: reg 0x10: [io  0x40e0-0x40e7]

[    0.389977] pci 0000:00:05.2: reg 0x14: [io  0x4110-0x4113]

[    0.389981] pci 0000:00:05.2: reg 0x18: [io  0x40e8-0x40ef]

[    0.389984] pci 0000:00:05.2: reg 0x1c: [io  0x4114-0x4117]

[    0.389988] pci 0000:00:05.2: reg 0x20: [io  0x40b0-0x40bf]

[    0.389992] pci 0000:00:05.2: reg 0x24: [mem 0xfa347000-0xfa347fff]

[    0.390095] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401

[    0.390202] pci 0000:00:06.1: [10de:0371] type 00 class 0x040300

[    0.390209] pci 0000:00:06.1: reg 0x10: [mem 0xfa340000-0xfa343fff]

[    0.390243] pci 0000:00:06.1: PME# supported from D3hot D3cold

[    0.390337] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000

[    0.390345] pci 0000:00:08.0: reg 0x10: [mem 0xfa348000-0xfa348fff]

[    0.390349] pci 0000:00:08.0: reg 0x14: [io  0x40f0-0x40f7]

[    0.390353] pci 0000:00:08.0: reg 0x18: [mem 0xfa34a100-0xfa34a1ff]

[    0.390357] pci 0000:00:08.0: reg 0x1c: [mem 0xfa34a300-0xfa34a30f]

[    0.390384] pci 0000:00:08.0: supports D1 D2

[    0.390386] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.390437] pci 0000:00:08.0: System wakeup disabled by ACPI

[    0.390491] pci 0000:00:09.0: [10de:0373] type 00 class 0x068000

[    0.390498] pci 0000:00:09.0: reg 0x10: [mem 0xfa349000-0xfa349fff]

[    0.390502] pci 0000:00:09.0: reg 0x14: [io  0x40f8-0x40ff]

[    0.390506] pci 0000:00:09.0: reg 0x18: [mem 0xfa34a200-0xfa34a2ff]

[    0.390510] pci 0000:00:09.0: reg 0x1c: [mem 0xfa34a310-0xfa34a31f]

[    0.390538] pci 0000:00:09.0: supports D1 D2

[    0.390539] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.390590] pci 0000:00:09.0: System wakeup disabled by ACPI

[    0.390645] pci 0000:00:0d.0: [10de:0378] type 01 class 0x060400

[    0.390673] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.390777] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000

[    0.390880] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000

[    0.390972] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000

[    0.391063] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000

[    0.391153] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000

[    0.391252] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000

[    0.391338] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000

[    0.391430] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000

[    0.391592] pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010

[    0.391602] pci 0000:01:05.0: reg 0x10: [mem 0xfa404000-0xfa4047ff]

[    0.391608] pci 0000:01:05.0: reg 0x14: [mem 0xfa400000-0xfa403fff]

[    0.391651] pci 0000:01:05.0: supports D1 D2

[    0.391653] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot

[    0.391726] pci 0000:00:06.0: PCI bridge to [bus 01] (subtractive decode)

[    0.391729] pci 0000:00:06.0:   bridge window [mem 0xfa400000-0xfa4fffff]

[    0.391732] pci 0000:00:06.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)

[    0.391734] pci 0000:00:06.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)

[    0.391735] pci 0000:00:06.0:   bridge window [io  0x0d00-0x0fff window] (subtractive decode)

[    0.391737] pci 0000:00:06.0:   bridge window [mem 0xfa300000-0xfa3fffff window] (subtractive decode)

[    0.391739] pci 0000:00:06.0:   bridge window [mem 0xfa400000-0xfa5fffff window] (subtractive decode)

[    0.391741] pci 0000:00:06.0:   bridge window [io  0x4000-0x4fff window] (subtractive decode)

[    0.391803] pci 0000:2b:00.0: [1033:0125] type 01 class 0x060400

[    0.391859] pci 0000:2b:00.0: supports D1

[    0.391860] pci 0000:2b:00.0: PME# supported from D0 D1 D3hot D3cold

[    0.391947] pci 0000:2b:00.1: [1033:0125] type 01 class 0x060400

[    0.391966] pci 0000:2b:00.1: reg 0x10: [mem 0xfa500000-0xfa50007f 64bit]

[    0.392032] pci 0000:2b:00.1: supports D1

[    0.392034] pci 0000:2b:00.1: PME# supported from D0 D1 D3hot D3cold

[    0.392120] pci 0000:2b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'

[    0.392128] pci 0000:00:0d.0: PCI bridge to [bus 2b-2d]

[    0.392132] pci 0000:00:0d.0:   bridge window [mem 0xfa500000-0xfa5fffff]

[    0.392242] pci 0000:2b:00.0: PCI bridge to [bus 2c]

[    0.392336] pci 0000:2b:00.1: PCI bridge to [bus 2d]

[    0.392360] pci_bus 0000:00: on NUMA node 0

[    0.393530] ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 40-ff])

[    0.393534] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.393540] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[    0.393584] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0001 [bus 40-7f] only partially covers this bridge

[    0.394238] PCI host bridge to bus 0001:40

[    0.394240] pci_bus 0001:40: root bus resource [io  0x03b0-0x03bb window]

[    0.394242] pci_bus 0001:40: root bus resource [io  0x03c0-0x03df window]

[    0.394244] pci_bus 0001:40: root bus resource [io  0x1000-0x3fff window]

[    0.394245] pci_bus 0001:40: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.394247] pci_bus 0001:40: root bus resource [mem 0xe0000000-0xefffffff window]

[    0.394249] pci_bus 0001:40: root bus resource [mem 0xf8000000-0xfa2fffff window]

[    0.394251] pci_bus 0001:40: root bus resource [bus 40-ff]

[    0.394267] pci 0001:40:00.0: [10de:0369] type 00 class 0x050000

[    0.394465] pci 0001:40:01.0: [10de:0361] type 00 class 0x050000

[    0.394472] pci 0001:40:01.0: reg 0x14: [mem 0xfa200000-0xfa200fff]

[    0.394487] HPET not enabled in BIOS. You might try hpet=force boot option

[    0.394553] pci 0001:40:01.1: [10de:0368] type 00 class 0x0c0500

[    0.394573] pci 0001:40:01.1: reg 0x20: [io  0x3000-0x303f]

[    0.394578] pci 0001:40:01.1: reg 0x24: [io  0x3040-0x307f]

[    0.394603] pci 0001:40:01.1: PME# supported from D3hot D3cold

[    0.394683] pci 0001:40:0a.0: [10de:0376] type 01 class 0x060400

[    0.394707] pci 0001:40:0a.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.394781] pci 0001:40:0d.0: [10de:0378] type 01 class 0x060400

[    0.394804] pci 0001:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.394879] pci 0001:40:0f.0: [10de:0377] type 01 class 0x060400

[    0.394902] pci 0001:40:0f.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.395045] pci 0001:45:00.0: [104d:9020] type 00 class 0x040000

[    0.395060] pci 0001:45:00.0: reg 0x10: [mem 0xfa100000-0xfa107fff]

[    0.395152] pci 0001:45:00.0: supports D1 D2

[    0.395208] pci 0001:45:00.0: System wakeup disabled by ACPI

[    0.404018] pci 0001:40:0a.0: PCI bridge to [bus 45]

[    0.404021] pci 0001:40:0a.0:   bridge window [mem 0xfa100000-0xfa1fffff]

[    0.404079] pci 0001:6b:00.0: [1000:0058] type 00 class 0x010000

[    0.404088] pci 0001:6b:00.0: reg 0x10: [io  0x1000-0x10ff]

[    0.404097] pci 0001:6b:00.0: reg 0x14: [mem 0xfa010000-0xfa013fff 64bit]

[    0.404105] pci 0001:6b:00.0: reg 0x1c: [mem 0xfa000000-0xfa00ffff 64bit]

[    0.404115] pci 0001:6b:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]

[    0.404148] pci 0001:6b:00.0: supports D1 D2

[    0.416009] pci 0001:40:0d.0: PCI bridge to [bus 6b]

[    0.416011] pci 0001:40:0d.0:   bridge window [io  0x1000-0x1fff]

[    0.416013] pci 0001:40:0d.0:   bridge window [mem 0xfa000000-0xfa0fffff]

[    0.416077] pci 0001:58:00.0: [10de:029e] type 00 class 0x030000

[    0.416085] pci 0001:58:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]

[    0.416092] pci 0001:58:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]

[    0.416099] pci 0001:58:00.0: reg 0x1c: [mem 0xf9000000-0xf9ffffff 64bit]

[    0.416103] pci 0001:58:00.0: reg 0x24: [io  0x2000-0x207f]

[    0.416108] pci 0001:58:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]

[    0.416179] pci 0001:58:00.0: System wakeup disabled by ACPI

[    0.428008] pci 0001:40:0f.0: PCI bridge to [bus 58]

[    0.428011] pci 0001:40:0f.0:   bridge window [io  0x2000-0x2fff]

[    0.428013] pci 0001:40:0f.0:   bridge window [mem 0xf8000000-0xf9ffffff]

[    0.428015] pci 0001:40:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]

[    0.428021] pci_bus 0001:40: on NUMA node 1

[    0.428160] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 16 17 18 19 20 21 22 23)

[    0.428283] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)

[    0.428403] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11

[    0.428523] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 16 17 18 19 20 21 22 23)

[    0.428645] ACPI: PCI Interrupt Link [LXPA] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.

[    0.428767] ACPI: PCI Interrupt Link [LXPB] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.

[    0.428888] ACPI: PCI Interrupt Link [LXPC] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.

[    0.429008] ACPI: PCI Interrupt Link [LXPD] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.

[    0.429053] ACPI: PCI Interrupt Link [LXA2] (IRQs *40), disabled.

[    0.429094] ACPI: PCI Interrupt Link [LXB2] (IRQs *41), disabled.

[    0.429135] ACPI: PCI Interrupt Link [LXC2] (IRQs *42), disabled.

[    0.429175] ACPI: PCI Interrupt Link [LXD2] (IRQs *43), disabled.

[    0.429293] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)

[    0.429412] ACPI: PCI Interrupt Link [LSB0] (IRQs *5 7 10 16 17 18 19 20 21 22 23)

[    0.429531] ACPI: PCI Interrupt Link [LSB2] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)

[    0.429652] ACPI: PCI Interrupt Link [LMC0] (IRQs *5 7 10 16 17 18 19 20 21 22 23)

[    0.429773] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)

[    0.429893] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11

[    0.430014] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.

[    0.430136] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11

[    0.430256] ACPI: PCI Interrupt Link [LSA1] (IRQs *5 7 10 16 17 18 19 20 21 22 23)

[    0.430377] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)

[    0.430684] vgaarb: setting as boot device: PCI:0001:58:00.0

[    0.430684] vgaarb: device added: PCI:0001:58:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.430684] vgaarb: loaded

[    0.430684] vgaarb: bridge control possible 0001:58:00.0

[    0.430684] PCI: Using ACPI for IRQ routing

[    0.432024] PCI: pci_cache_line_size set to 64 bytes

[    0.432086] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]

[    0.432088] e820: reserve RAM buffer [mem 0xdffc7000-0xdfffffff]

[    0.432253] clocksource: Switched to clocksource refined-jiffies

[    0.444628] VFS: Disk quotas dquot_6.6.0

[    0.444669] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.444812] pnp: PnP ACPI init

[    0.444989] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.445033] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)

[    0.445074] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)

[    0.445335] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)

[    0.445522] pnp 00:04: [dma 2]

[    0.445560] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)

[    0.445729] system 00:05: [io  0x04d0-0x04d1] has been reserved

[    0.445733] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.445833] system 00:06: [io  0x0400-0x047f] has been reserved

[    0.445835] system 00:06: [io  0x0480-0x048f] has been reserved

[    0.445837] system 00:06: [io  0x04c0-0x04cb] has been reserved

[    0.445840] system 00:06: [io  0xe000-0xe07f] has been reserved

[    0.445842] system 00:06: [io  0xe080-0xe0ff] has been reserved

[    0.445844] system 00:06: [io  0xf200-0xf27f] has been reserved

[    0.445846] system 00:06: [io  0xf280-0xf2ff] has been reserved

[    0.445848] system 00:06: [io  0xf800-0xf87f] has been reserved

[    0.445850] system 00:06: [io  0xf880-0xf8ff] has been reserved

[    0.445852] system 00:06: [io  0xf900-0xf97f] has been reserved

[    0.445854] system 00:06: [io  0xf980-0xf9ff] has been reserved

[    0.445856] system 00:06: [io  0xfa00-0xfa7f] has been reserved

[    0.445858] system 00:06: [io  0xfa80-0xfaff] has been reserved

[    0.445860] system 00:06: [io  0xfc00-0xfc7f] has been reserved

[    0.445862] system 00:06: [io  0xfc80-0xfcff] has been reserved

[    0.445864] system 00:06: [io  0xfe00-0xfe7f] has been reserved

[    0.445866] system 00:06: [io  0xfe80-0xfeff] has been reserved

[    0.445869] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.446514] pnp 00:07: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref]

[    0.446516] pnp 00:07: disabling [mem 0x000e8000-0x000fffff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref]

[    0.446518] pnp 00:07: disabling [mem 0x000dce00-0x000e7fff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref]

[    0.446553] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved

[    0.446556] system 00:07: [mem 0xfec01000-0xffffffff] could not be reserved

[    0.446559] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.446619] system 00:08: [mem 0xf0000000-0xf7ffffff window] has been reserved

[    0.446621] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.446633] pnp: PnP ACPI: found 9 devices

[    0.453743] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.453761] clocksource: Switched to clocksource acpi_pm

[    0.453795] pci 0000:00:06.0: PCI bridge to [bus 01]

[    0.453799] pci 0000:00:06.0:   bridge window [mem 0xfa400000-0xfa4fffff]

[    0.453803] pci 0000:2b:00.0: PCI bridge to [bus 2c]

[    0.453812] pci 0000:2b:00.1: PCI bridge to [bus 2d]

[    0.453824] pci 0000:00:0d.0: PCI bridge to [bus 2b-2d]

[    0.453826] pci 0000:00:0d.0:   bridge window [mem 0xfa500000-0xfa5fffff]

[    0.453831] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]

[    0.453833] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]

[    0.453835] pci_bus 0000:00: resource 6 [io  0x0d00-0x0fff window]

[    0.453836] pci_bus 0000:00: resource 7 [mem 0xfa300000-0xfa3fffff window]

[    0.453838] pci_bus 0000:00: resource 8 [mem 0xfa400000-0xfa5fffff window]

[    0.453840] pci_bus 0000:00: resource 9 [io  0x4000-0x4fff window]

[    0.453842] pci_bus 0000:01: resource 1 [mem 0xfa400000-0xfa4fffff]

[    0.453843] pci_bus 0000:01: resource 4 [io  0x0000-0x03af window]

[    0.453845] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7 window]

[    0.453846] pci_bus 0000:01: resource 6 [io  0x0d00-0x0fff window]

[    0.453848] pci_bus 0000:01: resource 7 [mem 0xfa300000-0xfa3fffff window]

[    0.453850] pci_bus 0000:01: resource 8 [mem 0xfa400000-0xfa5fffff window]

[    0.453851] pci_bus 0000:01: resource 9 [io  0x4000-0x4fff window]

[    0.453853] pci_bus 0000:2b: resource 1 [mem 0xfa500000-0xfa5fffff]

[    0.453900] pci 0001:40:0a.0: PCI bridge to [bus 45]

[    0.453902] pci 0001:40:0a.0:   bridge window [mem 0xfa100000-0xfa1fffff]

[    0.453909] pci 0001:6b:00.0: BAR 6: no space for [mem size 0x00100000 pref]

[    0.453911] pci 0001:6b:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]

[    0.453913] pci 0001:40:0d.0: PCI bridge to [bus 6b]

[    0.453914] pci 0001:40:0d.0:   bridge window [io  0x1000-0x1fff]

[    0.453916] pci 0001:40:0d.0:   bridge window [mem 0xfa000000-0xfa0fffff]

[    0.453921] pci 0001:58:00.0: BAR 6: no space for [mem size 0x00020000 pref]

[    0.453923] pci 0001:58:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]

[    0.453924] pci 0001:40:0f.0: PCI bridge to [bus 58]

[    0.453926] pci 0001:40:0f.0:   bridge window [io  0x2000-0x2fff]

[    0.453928] pci 0001:40:0f.0:   bridge window [mem 0xf8000000-0xf9ffffff]

[    0.453930] pci 0001:40:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]

[    0.453933] pci_bus 0001:40: resource 4 [io  0x03b0-0x03bb window]

[    0.453935] pci_bus 0001:40: resource 5 [io  0x03c0-0x03df window]

[    0.453937] pci_bus 0001:40: resource 6 [io  0x1000-0x3fff window]

[    0.453938] pci_bus 0001:40: resource 7 [mem 0x000a0000-0x000bffff window]

[    0.453940] pci_bus 0001:40: resource 8 [mem 0xe0000000-0xefffffff window]

[    0.453941] pci_bus 0001:40: resource 9 [mem 0xf8000000-0xfa2fffff window]

[    0.453944] pci_bus 0001:45: resource 1 [mem 0xfa100000-0xfa1fffff]

[    0.453945] pci_bus 0001:6b: resource 0 [io  0x1000-0x1fff]

[    0.453947] pci_bus 0001:6b: resource 1 [mem 0xfa000000-0xfa0fffff]

[    0.453949] pci_bus 0001:58: resource 0 [io  0x2000-0x2fff]

[    0.453950] pci_bus 0001:58: resource 1 [mem 0xf8000000-0xf9ffffff]

[    0.453952] pci_bus 0001:58: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]

[    0.454076] NET: Registered protocol family 2

[    0.454386] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    0.454741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.455240] TCP: Hash tables configured (established 65536 bind 65536)

[    0.455334] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    0.455415] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    0.455621] NET: Registered protocol family 1

[    0.455948] ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 23

[    0.512295] ACPI: PCI Interrupt Link [LSB2] enabled at IRQ 22

[    0.512501] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512542] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512583] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512625] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512668] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512715] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512765] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512817] pci 0000:00:00.0: Found enabled HT MSI Mapping

[    0.512913] pci 0001:40:00.0: Found enabled HT MSI Mapping

[    0.512952] pci 0001:40:00.0: Found enabled HT MSI Mapping

[    0.512993] pci 0001:40:00.0: Found enabled HT MSI Mapping

[    0.513008] pci 0001:58:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.513010] PCI: CLS 64 bytes, default 64

[    0.513088] Unpacking initramfs...

[    0.894196] Freeing initrd memory: 17996K

[    0.895035] PCI-DMA: Disabling AGP.

[    0.895154] PCI-DMA: aperture base @ d4000000 size 65536 KB

[    0.895155] PCI-DMA: using GART IOMMU.

[    0.895158] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture

[    0.898260] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a2ed2992, max_idle_ns: 440795215955 ns

[    0.899046] audit: initializing netlink subsys (disabled)

[    0.899083] audit: type=2000 audit(1540422931.895:1): initialized

[    0.899691] workingset: timestamp_bits=40 max_order=21 bucket_order=0

[    0.899819] zbud: loaded

[    0.901168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    0.901243] io scheduler noop registered

[    0.901244] io scheduler deadline registered

[    0.901271] io scheduler cfq registered (default)

[    0.901884] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    0.901892] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    0.902170] GHES: HEST is not enabled!

[    0.902264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.922765] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    0.923494] hpet_acpi_add: no address or irqs in _CRS

[    0.923514] Linux agpgart interface v0.103

[    0.923612] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

[    0.923613] AMD IOMMUv2 functionality not available on this system

[    0.924113] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12

[    0.926697] serio: i8042 KBD port at 0x60,0x64 irq 1

[    0.926703] serio: i8042 AUX port at 0x60,0x64 irq 12

[    0.926927] mousedev: PS/2 mouse device common for all mice

[    0.926993] rtc_cmos 00:00: RTC can wake from S4

[    0.927185] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0

[    0.927217] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram

[    0.927312] ledtrig-cpu: registered to indicate activity on CPUs

[    0.928420] NET: Registered protocol family 10

[    0.928775] mip6: Mobile IPv6

[    0.928778] NET: Registered protocol family 17

[    0.928781] mpls_gso: MPLS GSO support

[    0.929312] registered taskstats version 1

[    0.929342] zswap: loaded using pool lzo/zbud

[    0.929571] ima: No TPM chip found, activating TPM-bypass!

[    0.929575] ima: Allocated hash algorithm: sha256

[    0.930122] rtc_cmos 00:00: setting system clock to 2018-10-24 23:15:32 UTC (1540422932)

[    0.930176] PM: Hibernation image not present or could not be loaded.

[    0.932100] Freeing unused kernel memory: 1420K

[    0.932104] Write protecting the kernel read-only data: 12288k

[    0.933616] Freeing unused kernel memory: 1920K

[    0.937225] Freeing unused kernel memory: 1224K

[    0.945729] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    0.965320] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.965420] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.965432] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.002318] Floppy drive(s): fd0 is 1.44M

[    1.006679] i2c i2c-0: nForce2 SMBus adapter at 0x4000

[    1.006719] i2c i2c-1: nForce2 SMBus adapter at 0x4040

[    1.006854] i2c i2c-2: nForce2 SMBus adapter at 0x3000

[    1.006880] i2c i2c-3: nForce2 SMBus adapter at 0x3040

[    1.011437] SCSI subsystem initialized

[    1.012270] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[    1.012697] ACPI: PCI Interrupt Link [LMC0] enabled at IRQ 21

[    1.016240] ACPI: bus type USB registered

[    1.016286] usbcore: registered new interface driver usbfs

[    1.016299] usbcore: registered new interface driver hub

[    1.016355] usbcore: registered new device driver usb

[    1.017392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.017446] Fusion MPT base driver 3.04.20

[    1.017449] Copyright (c) 1999-2008 LSI Corporation

[    1.017668] ehci-pci: EHCI PCI platform driver

[    1.018266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.018484] libata version 3.00 loaded.

[    1.019228] Fusion MPT SAS Host driver 3.04.20

[    1.019445] ACPI: PCI Interrupt Link [LXD2] enabled at IRQ 43

[    1.020217] mptbase: ioc0: Initiating bringup

[    1.022967] FDC 0 is a post-1991 82077

[    1.040057] firewire_ohci 0000:01:05.0: enabling device (0000 -> 0002)

[    1.040359] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 20

[    1.100055] firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2

[    1.556599] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:1c:c4:18:51:92

[    1.556603] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3

[    1.557008] ACPI: PCI Interrupt Link [LMC1] enabled at IRQ 19

[    1.632137] firewire_core 0000:01:05.0: created device fw0: GUID 0060b0000023f144, S400

[    2.008022] ioc0: 

[    2.008026] LSISAS1068E B1: 

[    2.008027] Capabilities={

[    2.008027] Initiator

[    2.008028] }

[    2.100529] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1c:c4:18:51:93

[    2.100531] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3

[    2.100716] ehci-pci 0000:00:02.1: EHCI Host Controller

[    2.100725] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1

[    2.100737] ehci-pci 0000:00:02.1: debug port 1

[    2.100765] ehci-pci 0000:00:02.1: cache line size of 64 is not supported

[    2.100789] ehci-pci 0000:00:02.1: irq 22, io mem 0xfa34a000

[    2.101642] forcedeth 0000:00:08.0 enp0s8: renamed from eth0

[    2.116038] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00

[    2.116111] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.116113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.116115] usb usb1: Product: EHCI Host Controller

[    2.116116] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd

[    2.116117] usb usb1: SerialNumber: 0000:00:02.1

[    2.116292] hub 1-0:1.0: USB hub found

[    2.116305] hub 1-0:1.0: 10 ports detected

[    2.117033] ohci-pci: OHCI PCI platform driver

[    2.117055] sata_nv 0000:00:05.0: version 3.5

[    2.117345] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 18

[    2.117374] sata_nv 0000:00:05.0: Using SWNCQ mode

[    2.118332] scsi host0: sata_nv

[    2.118490] scsi host1: sata_nv

[    2.118547] ata1: SATA max UDMA/133 cmd 0x40c0 ctl 0x4100 bmdma 0x4090 irq 18

[    2.118548] ata2: SATA max UDMA/133 cmd 0x40c8 ctl 0x4104 bmdma 0x4098 irq 18

[    2.118805] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 17

[    2.118821] sata_nv 0000:00:05.1: Using SWNCQ mode

[    2.119350] scsi host2: sata_nv

[    2.119484] scsi host3: sata_nv

[    2.119539] ata3: SATA max UDMA/133 cmd 0x40d0 ctl 0x4108 bmdma 0x40a0 irq 17

[    2.119540] ata4: SATA max UDMA/133 cmd 0x40d8 ctl 0x410c bmdma 0x40a8 irq 17

[    2.119755] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 16

[    2.119770] sata_nv 0000:00:05.2: Using SWNCQ mode

[    2.120211] scsi host4: sata_nv

[    2.120323] scsi host5: sata_nv

[    2.120379] ata5: SATA max UDMA/133 cmd 0x40e0 ctl 0x4110 bmdma 0x40b0 irq 16

[    2.120380] ata6: SATA max UDMA/133 cmd 0x40e8 ctl 0x4114 bmdma 0x40b8 irq 16

[    2.120426] pata_amd 0000:00:04.0: version 0.4.1

[    2.121392] scsi host6: pata_amd

[    2.121538] scsi host7: pata_amd

[    2.121591] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14

[    2.121592] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15

[    2.121912] ohci-pci 0000:00:02.0: OHCI PCI host controller

[    2.121920] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2

[    2.121973] ohci-pci 0000:00:02.0: irq 23, io mem 0xfa344000

[    2.124503] forcedeth 0000:00:09.0 enp0s9: renamed from eth1

[    2.182098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    2.182100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.182101] usb usb2: Product: OHCI PCI host controller

[    2.182102] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ohci_hcd

[    2.182104] usb usb2: SerialNumber: 0000:00:02.0

[    2.182285] hub 2-0:1.0: USB hub found

[    2.182296] hub 2-0:1.0: 10 ports detected

[    2.300387] ata7.00: ATAPI: HL-DT-STDVD+-RW GSA-H21L, W516, max UDMA/44

[    2.300397] ata7: nv_mode_filter: 0xf39f&0xf39f->0xf39f, BIOS=0x0 (0x0) ACPI=0xf01f (39:4294967295:0x13)

[    2.324346] ata7.00: configured for UDMA/44

[    2.434455] ata3: SATA link down (SStatus 0 SControl 300)

[    2.434485] ata5: SATA link down (SStatus 0 SControl 300)

[    2.588031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    2.590317] ata1.00: ATA-7: ST3250620AS, 3.AHG, max UDMA/100

[    2.590320] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)

[    2.594815] ata1.00: configured for UDMA/100

[    2.595205] scsi 0:0:0:0: Direct-Access     ATA      ST3250620AS      G    PQ: 0 ANSI: 5

[    2.637384] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)

[    2.637519] sd 0:0:0:0: [sda] Write Protect is off

[    2.637523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.637555] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.655633]  sda: sda1

[    2.656126] sd 0:0:0:0: [sda] Attached SCSI disk

[    2.704037] usb 2-7: new low-speed USB device number 2 using ohci-pci

[    2.925058] usb 2-7: New USB device found, idVendor=0461, idProduct=4d22

[    2.925060] usb 2-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[    2.925062] usb 2-7: Product: USB Optical Mouse

[    2.929705] hidraw: raw HID events driver (C) Jiri Kosina

[    2.936308] usbcore: registered new interface driver usbhid

[    2.936310] usbhid: USB HID core driver

[    2.937294] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/0003:0461:4D22.0001/input/input3

[    2.937418] hid-generic 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-7/input0

[    3.108042] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    3.110337] ata2.00: ATA-7: ST3160828AS, 3.02, max UDMA/100

[    3.110340] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)

[    3.114831] ata2.00: configured for UDMA/100

[    3.115149] scsi 1:0:0:0: Direct-Access     ATA      ST3160828AS      3.02 PQ: 0 ANSI: 5

[    3.148240] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)

[    3.148298] sd 1:0:0:0: [sdb] Write Protect is off

[    3.148301] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[    3.148326] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    3.193180]  sdb: sdb1 sdb2 < sdb5 sdb6 >

[    3.194238] sd 1:0:0:0: [sdb] Attached SCSI disk

[    3.392033] usb 2-9: new low-speed USB device number 3 using ohci-pci

[    3.463165] ata4: SATA link down (SStatus 0 SControl 300)

[    3.490384] random: fast init done

[    3.621062] usb 2-9: New USB device found, idVendor=0461, idProduct=0010

[    3.621065] usb 2-9: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[    3.621066] usb 2-9: Product: USB Keyboard

[    3.634581] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/0003:0461:0010.0002/input/input4

[    3.692243] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:02.0-9/input0

[    3.707116] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/0003:0461:0010.0003/input/input5

[    3.764089] hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:02.0-9/input1

[    3.774442] ata6: SATA link down (SStatus 0 SControl 300)

[    3.776124] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H21L W516 PQ: 0 ANSI: 5

[    3.777171] ata8: port disabled--ignoring

[    3.794643] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray

[    3.794646] cdrom: Uniform CD-ROM driver Revision: 3.20

[    3.794898] sr 6:0:0:0: Attached scsi CD-ROM sr0

[   12.542091] scsi host8: ioc0: LSISAS1068E B1, FwRev=01103c00h, Ports=1, MaxQ=511, IRQ=28

[   12.580662] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x500000e016cc0552

[   12.583443] scsi 8:0:0:0: Direct-Access     FUJITSU  MAX3073RC        HPF1 PQ: 0 ANSI: 5

[   12.636912] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 8, phy 1, sas_addr 0x500000e016da28d2

[   12.639786] sd 8:0:0:0: [sdc] 143374738 512-byte logical blocks: (73.4 GB/68.4 GiB)

[   12.640123] scsi 8:0:1:0: Direct-Access     FUJITSU  MAX3073RC        HPF1 PQ: 0 ANSI: 5

[   12.642535] sd 8:0:0:0: [sdc] Write Protect is off

[   12.642538] sd 8:0:0:0: [sdc] Mode Sense: cf 00 10 08

[   12.643938] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA

[   12.680014]  sdc: sdc1

[   12.703758] mptsas: ioc0: attaching raid volume, channel 1, id 1

[   12.706749] sd 8:0:0:0: [sdc] Attached SCSI disk

[   12.864652] PM: Starting manual resume from disk

[   12.864658] PM: Hibernation image partition 8:21 present

[   12.864660] PM: Looking for hibernation image.

[   12.864976] PM: Image not found (code -22)

[   12.864977] PM: Hibernation image not present or could not be loaded.

[   13.246113] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[   13.752186] random: crng init done

[   13.752189] random: 7 urandom warning(s) missed due to ratelimiting

[   14.184447] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.

[   14.482182] ip_tables: (C) 2000-2006 Netfilter Core Team

[   14.556627] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)

[   14.556810] systemd[1]: Detected architecture x86-64.

[   14.575611] systemd[1]: Set hostname to <alexdebian.tld>.

[   17.138155] systemd[1]: Listening on Journal Socket.

[   17.138250] systemd[1]: Reached target User and Group Name Lookups.

[   17.138304] systemd[1]: Listening on Journal Socket (/dev/log).

[   17.138329] systemd[1]: Reached target Remote File Systems.

[   17.138600] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[   17.138702] systemd[1]: Listening on Journal Audit Socket.

[   17.138750] systemd[1]: Listening on Syslog Socket.

[   17.546983] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro

[   17.862797] systemd-journald[244]: Received request to flush runtime journal from PID 1

[   18.422014] lp: driver loaded but no devices found

[   18.559880] ppdev: user-space parallel port driver

[   18.787985] [drm] Initialized

[   19.330470] nvidia: loading out-of-tree module taints kernel.

[   19.330480] nvidia: module license 'NVIDIA' taints kernel.

[   19.330481] Disabling lock debugging due to kernel taint

[   19.354618] ACPI: PCI Interrupt Link [LXB2] enabled at IRQ 41

[   19.354673] vgaarb: device changed decodes: PCI:0001:58:00.0,olddecodes=io+mem,decodes=none:owns=io+mem

[   19.355145] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0001:58:00.0 on minor 0

[   19.355158] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.137  Thu Sep 14 13:51:03 PDT 2017

[   20.189825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6

[   20.189831] ACPI: Power Button [PBTN]

[   20.189892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7

[   20.189894] ACPI: Power Button [PWRF]

[   20.236376] nv_tco: NV TCO WatchDog Timer Driver v0.01

[   20.236498] nv_tco: Watchdog reboot detected

[   20.236580] nv_tco: initialized (0xf940). heartbeat=30 sec (nowayout=0)

[   20.238077] wmi: Mapper loaded

[   20.259382] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   20.338148] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   20.338199] sd 1:0:0:0: Attached scsi generic sg1 type 0

[   20.338240] sr 6:0:0:0: Attached scsi generic sg2 type 5

[   20.338282] sd 8:0:0:0: Attached scsi generic sg3 type 0

[   20.338321] scsi 8:0:1:0: Attached scsi generic sg4 type 0

[   20.386926] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141

[   20.387007] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141

[   20.530206] input: PC Speaker as /devices/platform/pcspkr/input/input8

[   20.544805] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23

[   20.544816] snd_hda_intel 0000:00:06.1: Disabling MSI

[   20.725636] input: HP WMI hotkeys as /devices/virtual/input/input9

[   21.012772] kvm: Nested Virtualization enabled

[   21.046792] EDAC MC: Ver: 3.0.0

[   21.055245] MCE: In-kernel MCE decoding enabled.

[   21.064108] EDAC amd64: DRAM ECC enabled.

[   21.064119] EDAC amd64: K8 revF or later detected (node 0).

[   21.064134] EDAC MC: DCT0 chip selects:

[   21.064135] EDAC amd64: MC: 0:  2048MB 1:     0MB

[   21.064136] EDAC amd64: MC: 2:  2048MB 3:     0MB

[   21.064137] EDAC amd64: MC: 4:     0MB 5:     0MB

[   21.064138] EDAC amd64: MC: 6:     0MB 7:     0MB

[   21.064297] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)

[   21.064299] EDAC amd64: DRAM ECC enabled.

[   21.064303] EDAC amd64: K8 revF or later detected (node 1).

[   21.064315] EDAC MC: DCT0 chip selects:

[   21.064316] EDAC amd64: MC: 0:  2048MB 1:     0MB

[   21.064317] EDAC amd64: MC: 2:  2048MB 3:     0MB

[   21.064318] EDAC amd64: MC: 4:     0MB 5:     0MB

[   21.064319] EDAC amd64: MC: 6:     0MB 7:     0MB

[   21.064466] EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT)

[   21.064482] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)

[   21.064483] AMD64 EDAC driver v3.4.0

[   21.071970] powernow_k8: fid 0x12 (2600 MHz), vid 0x8

[   21.071972] powernow_k8: fid 0x10 (2400 MHz), vid 0xa

[   21.071973] powernow_k8: fid 0xe (2200 MHz), vid 0xc

[   21.071974] powernow_k8: fid 0xc (2000 MHz), vid 0xe

[   21.071975] powernow_k8: fid 0xa (1800 MHz), vid 0x10

[   21.071976] powernow_k8: fid 0x2 (1000 MHz), vid 0x12

[   21.072127] powernow_k8: fid 0x12 (2600 MHz), vid 0x8

[   21.072128] powernow_k8: fid 0x10 (2400 MHz), vid 0xa

[   21.072129] powernow_k8: fid 0xe (2200 MHz), vid 0xc

[   21.072130] powernow_k8: fid 0xc (2000 MHz), vid 0xe

[   21.072131] powernow_k8: fid 0xa (1800 MHz), vid 0x10

[   21.072132] powernow_k8: fid 0x2 (1000 MHz), vid 0x12

[   21.072162] powernow_k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 (4 cpu cores) (version 2.20.00)

[   21.636096] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0

[   21.796054] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line

[   21.796062] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)

[   21.796066] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

[   21.796070] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[   21.796074] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0

[   21.796076] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[   21.796082] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18

[   21.796086] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19

[   21.796090] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a

[   21.796093] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c

[   21.796097] snd_hda_codec_realtek hdaudioC0D0:      Aux=0x14

[   22.173028] Adding 8386556k swap on /dev/sdb5.  Priority:-1 extents:1 across:8386556k FS

[   22.960301] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)

[   24.497148] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/sound/card0/input10

[   24.497896] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input11

[   24.498133] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input12

[   24.498320] input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input13

[   24.498508] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input14

[   24.498709] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input15

[   32.777267] IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready

[   32.778224] forcedeth 0000:00:08.0 enp0s8: MSI enabled

[   32.778489] forcedeth 0000:00:08.0 enp0s8: no link during initialization

[   32.778807] IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready

[   33.230930] forcedeth 0000:00:09.0 enp0s9: MSI enabled

[   33.232170] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready

[   33.232192] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s9: link becomes ready

[   53.391867] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)

[   56.591155] ip6_tables: (C) 2000-2006 Netfilter Core Team

[  169.708047] usb 1-3: new high-speed USB device number 4 using ehci-pci

[  169.857916] usb 1-3: New USB device found, idVendor=174c, idProduct=1153

[  169.857921] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1

[  169.857925] usb 1-3: Product: AS2115

[  169.857929] usb 1-3: Manufacturer: ASMedia

[  169.857932] usb 1-3: SerialNumber: 00000000000000000000

[  169.947201] usb-storage 1-3:1.0: USB Mass Storage device detected

[  169.947692] scsi host9: usb-storage 1-3:1.0

[  169.947949] usbcore: registered new interface driver usb-storage

[  169.962992] usbcore: registered new interface driver uas

[  170.978361] scsi 9:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6

[  170.979564] sd 9:0:0:0: Attached scsi generic sg5 type 0

[  170.987153] sd 9:0:0:0: [sdd] Spinning up disk...

[  172.000120] .

[  172.001172] ready

[  172.007670] sd 9:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[  172.010154] sd 9:0:0:0: [sdd] Write Protect is off

[  172.010161] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00

[  172.012301] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[  172.028466]  sdd: sdd1

[  172.035143] sd 9:0:0:0: [sdd] Attached SCSI disk

[  174.219284] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

empanada · 24-10-2018 22:43:09

saxoalex a écrit :

Vous allez dire que je suis con

Jamais .

FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Sortie de

fdisk -l

???

C'est peut-être un disque multimedia?

raleur · 24-10-2018 23:00:51

Ce sont les résultats lors du branchement du disque USB 3 sur la machine où le disque est reconnu ou sur celle où il ne l'est pas ?
Visiblement, un disque de 1 To connecté en USB 2 est bien reconnu.

Dernière modification par raleur (24-10-2018 23:01:48)

saxoalex · 24-10-2018 23:11:10

fdisk -l

Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0xc1bbc1bc

Device     Boot Start       End   Sectors   Size Id Type

/dev/sda1  *     2048 488396799 488394752 232.9G  7 HPFS/NTFS/exFAT

Disk /dev/sdb: 149.1 GiB, 160041885696 bytes, 312581808 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0xda151428

Device     Boot    Start       End   Sectors   Size Id Type

/dev/sdb1           2048  58593279  58591232    28G 83 Linux

/dev/sdb2       58595326 312580095 253984770 121.1G  5 Extended

/dev/sdb5       58595328  75368447  16773120     8G 82 Linux swap / Solaris

/dev/sdb6       75370496 312580095 237209600 113.1G 83 Linux

Disk /dev/sdc: 68.4 GiB, 73407865856 bytes, 143374738 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0x348f348f

Device     Boot Start       End   Sectors  Size Id Type

/dev/sdc1        2048 143374335 143372288 68.4G  b W95 FAT32

Disk /dev/sdd: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0xac1994f9

Device     Boot Start        End    Sectors   Size Id Type

/dev/sdd1  *       63 1953525167 1953525105 931.5G  c W95 FAT32 (LBA)

Un disque multimedia ?

Non, ce sont les résultat sur une autre machine.

raleur · 24-10-2018 23:26:39

Ce sont évidemment les résultats sur la machine à problème qui nous intéressent.

saxoalex · 25-10-2018 01:19:16

Avant :

lsusb

Bus 002 Device 003: ID 0bc2:61b5 Seagate RSS LLC 

Bus 002 Device 002: ID 2109:0812 VIA Labs, Inc. VL812 Hub

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 005: ID 04f2:b48c Chicony Electronics Co., Ltd 

Bus 001 Device 004: ID 13d3:3414 IMC Networks 

Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver

Bus 001 Device 002: ID 2109:2812 VIA Labs, Inc. VL812 Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Après :

lsusb 

Bus 002 Device 003: ID 0bc2:61b5 Seagate RSS LLC 

Bus 002 Device 002: ID 2109:0812 VIA Labs, Inc. VL812 Hub

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 005: ID 04f2:b48c Chicony Electronics Co., Ltd 

Bus 001 Device 004: ID 13d3:3414 IMC Networks 

Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver

Bus 001 Device 002: ID 2109:2812 VIA Labs, Inc. VL812 Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg

[    0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02

[    0.000000] Linux version 4.14.68-1-MANJARO (builduser@development) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Wed Sep 5 19:07:05 UTC 2018

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=3ac805cd-93ee-4c3c-9d9c-6add592f2d55 rw quiet

[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9c58fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000b9c59000-0x00000000b9c5ffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000b9c60000-0x00000000ba568fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ba569000-0x00000000ba7fdfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ba7fe000-0x00000000ca05cfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca05d000-0x00000000ca264fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ca265000-0x00000000ca415fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca416000-0x00000000cab16fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000cab17000-0x00000000caffefff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032f1fffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.7 present.

[    0.000000] DMI: ASUSTeK COMPUTER INC. X550JX/X550JX, BIOS X550JX.209 10/31/2015

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x32f200 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-CFFFF write-protect

[    0.000000]   D0000-E7FFF uncachable

[    0.000000]   E8000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 0000000000 mask 7E00000000 write-back

[    0.000000]   1 base 0200000000 mask 7F00000000 write-back

[    0.000000]   2 base 0300000000 mask 7FC0000000 write-back

[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable

[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable

[    0.000000]   5 base 00CC000000 mask 7FFC000000 uncachable

[    0.000000]   6 base 00CBC00000 mask 7FFFC00000 uncachable

[    0.000000]   7 base 0330000000 mask 7FF0000000 uncachable

[    0.000000]   8 base 032F800000 mask 7FFF800000 uncachable

[    0.000000]   9 base 032F400000 mask 7FFFC00000 uncachable

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  

[    0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffffffffff200840]

[    0.000000] Scanning 1 areas for low memory corruption

[    0.000000] Base memory trampoline at [ffff89a740096000] 96000 size 24576

[    0.000000] Using GB pages for direct mapping

[    0.000000] BRK [0x1cf63c000, 0x1cf63cfff] PGTABLE

[    0.000000] BRK [0x1cf63d000, 0x1cf63dfff] PGTABLE

[    0.000000] BRK [0x1cf63e000, 0x1cf63efff] PGTABLE

[    0.000000] BRK [0x1cf63f000, 0x1cf63ffff] PGTABLE

[    0.000000] BRK [0x1cf640000, 0x1cf640fff] PGTABLE

[    0.000000] BRK [0x1cf641000, 0x1cf641fff] PGTABLE

[    0.000000] BRK [0x1cf642000, 0x1cf642fff] PGTABLE

[    0.000000] BRK [0x1cf643000, 0x1cf643fff] PGTABLE

[    0.000000] BRK [0x1cf644000, 0x1cf644fff] PGTABLE

[    0.000000] BRK [0x1cf645000, 0x1cf645fff] PGTABLE

[    0.000000] BRK [0x1cf646000, 0x1cf646fff] PGTABLE

[    0.000000] BRK [0x1cf647000, 0x1cf647fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x36ddf000-0x376e6fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)

[    0.000000] ACPI: XSDT 0x00000000CA49A098 0000B4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: FACP 0x00000000CA4ADF58 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: DSDT 0x00000000CA49A260 013CF1 (v02 _ASUS_ Notebook 00000012 INTL 20120711)

[    0.000000] ACPI: FACS 0x00000000CAB14F80 000040

[    0.000000] ACPI: APIC 0x00000000CA4AE068 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: FPDT 0x00000000CA4AE0E0 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: ECDT 0x00000000CA4AE128 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)

[    0.000000] ACPI: SSDT 0x00000000CA4AE1F0 00019D (v01 Intel  zpodd    00001000 INTL 20120711)

[    0.000000] ACPI: SSDT 0x00000000CA4AE390 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)

[    0.000000] ACPI: SSDT 0x00000000CA4AE8D0 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)

[    0.000000] ACPI: MCFG 0x00000000CA4AF3A8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)

[    0.000000] ACPI: HPET 0x00000000CA4AF3E8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)

[    0.000000] ACPI: SSDT 0x00000000CA4AF420 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)

[    0.000000] ACPI: SSDT 0x00000000CA4AF6B8 004541 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)

[    0.000000] ACPI: SSDT 0x00000000CA4B3C00 0019BA (v01 SgRef  SgPeg    00001000 INTL 20120711)

[    0.000000] ACPI: SSDT 0x00000000CA4B55C0 000393 (v01 CppcTa CppcTabl 00001000 INTL 20120711)

[    0.000000] ACPI: PCCT 0x00000000CA4B5958 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120711)

[    0.000000] ACPI: SSDT 0x00000000CA4B59C8 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20120711)

[    0.000000] ACPI: DMAR 0x00000000CA4B6490 0000A8 (v01 INTEL  HSW      00000001 INTL 00000001)

[    0.000000] ACPI: SSDT 0x00000000CA4B6538 0019F7 (v01 OptRef OptTabl  00001000 INTL 20120711)

[    0.000000] ACPI: MSDM 0x00000000CA263E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000032f1fffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x32f1fa000-0x32f1fdfff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000032f1fffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b9c58fff]

[    0.000000]   node   0: [mem 0x00000000b9c60000-0x00000000ba568fff]

[    0.000000]   node   0: [mem 0x00000000ba7fe000-0x00000000ca05cfff]

[    0.000000]   node   0: [mem 0x00000000ca265000-0x00000000ca415fff]

[    0.000000]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000032f1fffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000032f1fffff]

[    0.000000] On node 0 totalpages: 3117326

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3995 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 12862 pages used for memmap

[    0.000000]   DMA32 zone: 823155 pages, LIFO batch:31

[    0.000000]   Normal zone: 35784 pages used for memmap

[    0.000000]   Normal zone: 2290176 pages, LIFO batch:31

[    0.000000] Reserving Intel graphics memory at 0x00000000cbe00000-0x00000000cfdfffff

[    0.000000] ACPI: PM-Timer IO Port: 0x1808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xb9c59000-0xb9c5ffff]

[    0.000000] PM: Registered nosave memory: [mem 0xba569000-0xba7fdfff]

[    0.000000] PM: Registered nosave memory: [mem 0xca05d000-0xca264fff]

[    0.000000] PM: Registered nosave memory: [mem 0xca416000-0xcab16fff]

[    0.000000] PM: Registered nosave memory: [mem 0xcab17000-0xcaffefff]

[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]

[    0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns

[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x4d3 with crng_init=0

[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] percpu: Embedded 42 pages/cpu @ffff89aa6ee00000 s134360 r8192 d29480 u524288

[    0.000000] pcpu-alloc: s134360 r8192 d29480 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3068595

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=3ac805cd-93ee-4c3c-9d9c-6add592f2d55 rw quiet

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 12173804K/12469304K available (10252K kernel code, 1167K rwdata, 2880K rodata, 1360K init, 988K bss, 295500K reserved, 0K cma-reserved)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Kernel/User page tables isolation: enabled

[    0.000000] ftrace: allocating 29535 entries in 116 pages

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.

[    0.000000]  Tasks RCU enabled.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[    0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16

[    0.000000] spurious 8259A interrupt: IRQ7.

[    0.000000] Console: colour dummy device 80x25

[    0.000000] console [tty0] enabled

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[    0.000000] hpet clockevent registered

[    0.003333] tsc: PIT calibration matches HPET. 1 loops

[    0.003333] tsc: Detected 2793.544 MHz processor

[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.88 BogoMIPS (lpj=9311813)

[    0.003333] pid_max: default: 32768 minimum: 301

[    0.003333] ACPI: Core revision 20170728

[    0.016018] ACPI: 10 ACPI AML tables successfully acquired and loaded

[    0.016037] Security Framework initialized

[    0.016038] Yama: becoming mindful.

[    0.018073] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)

[    0.019102] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.019145] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)

[    0.019178] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)

[    0.019328] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.019328] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[    0.019332] mce: CPU supports 7 MCE banks

[    0.019338] CPU0: Thermal monitoring enabled (TM1)

[    0.019346] process: using mwait in idle threads

[    0.019348] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024

[    0.019349] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4

[    0.019350] Spectre V2 : Mitigation: Full generic retpoline

[    0.019350] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[    0.019351] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier

[    0.019351] Spectre V2 : Enabling Restricted Speculation for firmware calls

[    0.019352] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp

[    0.022304] Freeing SMP alternatives memory: 24K

[    0.023395] smpboot: Max logical packages: 2

[    0.023399] DMAR: Host address width 39

[    0.023400] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[    0.023407] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a

[    0.023408] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[    0.023411] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da

[    0.023411] DMAR: RMRR base: 0x000000ca1eb000 end: 0x000000ca1f7fff

[    0.023412] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff

[    0.023414] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1

[    0.023414] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[    0.023415] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.

[    0.023660] DMAR-IR: Enabled IRQ remapping in x2apic mode

[    0.023661] x2apic enabled

[    0.023665] Switched APIC routing to cluster x2apic.

[    0.024084] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.056359] TSC deadline timer enabled

[    0.056361] smpboot: CPU0: Intel(R) Core(TM) i5-4200H CPU @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)

[    0.066684] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.

[    0.066716] ... version:                3

[    0.066716] ... bit width:              48

[    0.066717] ... generic registers:      4

[    0.066717] ... value mask:             0000ffffffffffff

[    0.066717] ... max period:             00007fffffffffff

[    0.066718] ... fixed-purpose events:   3

[    0.066718] ... event mask:             000000070000000f

[    0.073347] Hierarchical SRCU implementation.

[    0.086773] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[    0.093348] smp: Bringing up secondary CPUs ...

[    0.120023] x86: Booting SMP configuration:

[    0.120024] .... node  #0, CPUs:      #1 #2 #3

[    0.173596] smp: Brought up 1 node, 4 CPUs

[    0.173596] smpboot: Total of 4 processors activated (22357.53 BogoMIPS)

[    0.175836] devtmpfs: initialized

[    0.175836] x86/mm: Memory block size: 128MB

[    0.177056] PM: Registering ACPI NVS region [mem 0xb9c59000-0xb9c5ffff] (28672 bytes)

[    0.177056] PM: Registering ACPI NVS region [mem 0xca416000-0xcab16fff] (7344128 bytes)

[    0.177056] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    0.177056] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.177056] pinctrl core: initialized pinctrl subsystem

[    0.177056] RTC time:  2:12:45, date: 10/25/18

[    0.177056] NET: Registered protocol family 16

[    0.177056] cpuidle: using governor ladder

[    0.177056] cpuidle: using governor menu

[    0.177056] Error parsing PCC subspaces from PCCT

[    0.177056] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[    0.177056] ACPI: bus type PCI registered

[    0.177056] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.177056] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)

[    0.177056] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820

[    0.177056] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.

[    0.177056] PCI: Using configuration type 1 for base access

[    0.177056] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[    0.177165] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages

[    0.177165] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[    0.177165] ACPI: Added _OSI(Module Device)

[    0.177165] ACPI: Added _OSI(Processor Device)

[    0.177165] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.177165] ACPI: Added _OSI(Processor Aggregator Device)

[    0.177165] ACPI: EC: EC started

[    0.177165] ACPI: EC: interrupt blocked

[    0.177582] ACPI: \: Used as first EC

[    0.177584] ACPI: \: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.177584] ACPI: \: Used as boot ECDT EC to handle transactions

[    0.177705] ACPI: Executed 2 blocks of module-level executable AML code

[    0.183844] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

[    0.185352] ACPI: Dynamic OEM Table Load:

[    0.185352] ACPI: SSDT 0xFFFF89AA600A4400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)

[    0.185352] ACPI: Dynamic OEM Table Load:

[    0.185352] ACPI: SSDT 0xFFFF89AA6067A800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)

[    0.186749] ACPI: Dynamic OEM Table Load:

[    0.186752] ACPI: SSDT 0xFFFF89AA60060E00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)

[    0.187173] ACPI: Interpreter enabled

[    0.187199] ACPI: (supports S0 S3 S4 S5)

[    0.187199] ACPI: Using IOAPIC for interrupt routing

[    0.187220] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.187417] ACPI: Enabled 6 GPEs in block 00 to 3F

[    0.191500] ACPI: Power Resource [PG00] (on)

[    0.195243] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])

[    0.195247] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.195627] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]

[    0.195628] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration

[    0.195902] PCI host bridge to bus 0000:00

[    0.195904] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.195905] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.195906] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.195907] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]

[    0.195908] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]

[    0.195909] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]

[    0.195909] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]

[    0.195910] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]

[    0.195911] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]

[    0.195912] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]

[    0.195913] pci_bus 0000:00: root bus resource [bus 00-3e]

[    0.195919] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000

[    0.195981] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400

[    0.196009] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.196083] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000

[    0.196091] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]

[    0.196096] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.196099] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]

[    0.196152] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300

[    0.196159] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]

[    0.196232] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330

[    0.196250] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]

[    0.196301] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    0.196349] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000

[    0.196368] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c00f 64bit]

[    0.196423] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

[    0.196475] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300

[    0.196492] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]

[    0.196552] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.196603] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400

[    0.196662] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.196739] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400

[    0.196799] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[    0.196870] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400

[    0.196930] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

[    0.197005] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100

[    0.197144] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601

[    0.197159] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]

[    0.197165] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]

[    0.197171] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]

[    0.197178] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]

[    0.197184] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]

[    0.197191] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]

[    0.197221] pci 0000:00:1f.2: PME# supported from D3hot

[    0.197264] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500

[    0.197280] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]

[    0.197297] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]

[    0.197384] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200

[    0.197395] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]

[    0.197402] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]

[    0.197408] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]

[    0.197413] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]

[    0.197417] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]

[    0.206678] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.206680] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    0.206682] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]

[    0.206684] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]

[    0.206731] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.206806] pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000

[    0.206840] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]

[    0.206871] pci 0000:03:00.0: reg 0x18: [mem 0xf7900000-0xf7903fff 64bit]

[    0.206986] pci 0000:03:00.0: supports D1 D2

[    0.206987] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.216691] pci 0000:00:1c.2: PCI bridge to [bus 03]

[    0.216695] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]

[    0.216698] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]

[    0.216769] pci 0000:04:00.0: [10ec:5287] type 00 class 0xff0000

[    0.216800] pci 0000:04:00.0: reg 0x10: [mem 0xf7815000-0xf7815fff]

[    0.216862] pci 0000:04:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref]

[    0.216946] pci 0000:04:00.0: supports D1 D2

[    0.216948] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold

[    0.217026] pci 0000:04:00.1: [10ec:8168] type 00 class 0x020000

[    0.217056] pci 0000:04:00.1: reg 0x10: [io  0xc000-0xc0ff]

[    0.217083] pci 0000:04:00.1: reg 0x18: [mem 0xf7814000-0xf7814fff 64bit]

[    0.217101] pci 0000:04:00.1: reg 0x20: [mem 0xf7810000-0xf7813fff 64bit]

[    0.217190] pci 0000:04:00.1: supports D1 D2

[    0.217191] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.226695] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    0.226698] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]

[    0.226701] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]

[    0.227359] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)

[    0.227397] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.

[    0.227434] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)

[    0.227470] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)

[    0.227505] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.

[    0.227541] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.

[    0.227577] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)

[    0.227613] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.

[    0.227921] ACPI: EC: interrupt unblocked

[    0.227927] ACPI: EC: event unblocked

[    0.227933] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.227934] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events

[    0.227993] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[    0.227993] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.227993] pci 0000:00:02.0: vgaarb: bridge control possible

[    0.227993] vgaarb: loaded

[    0.227993] EDAC MC: Ver: 3.0.0

[    0.227993] PCI: Using ACPI for IRQ routing

[    0.227993] PCI: pci_cache_line_size set to 64 bytes

[    0.227993] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]

[    0.227993] e820: reserve RAM buffer [mem 0xb9c59000-0xbbffffff]

[    0.227993] e820: reserve RAM buffer [mem 0xba569000-0xbbffffff]

[    0.227993] e820: reserve RAM buffer [mem 0xca05d000-0xcbffffff]

[    0.227993] e820: reserve RAM buffer [mem 0xca416000-0xcbffffff]

[    0.227993] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]

[    0.227993] e820: reserve RAM buffer [mem 0x32f200000-0x32fffffff]

[    0.227993] NetLabel: Initializing

[    0.227993] NetLabel:  domain hash size = 128

[    0.227993] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO

[    0.228002] NetLabel:  unlabeled traffic allowed by default

[    0.228012] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.228012] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[    0.231017] clocksource: Switched to clocksource hpet

[    0.236337] VFS: Disk quotas dquot_6.6.0

[    0.236351] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.236399] pnp: PnP ACPI init

[    0.236504] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved

[    0.236508] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.236720] system 00:01: [io  0x0680-0x069f] has been reserved

[    0.236721] system 00:01: [io  0xffff] has been reserved

[    0.236723] system 00:01: [io  0xffff] has been reserved

[    0.236724] system 00:01: [io  0xffff] has been reserved

[    0.236725] system 00:01: [io  0x1c00-0x1cfe] has been reserved

[    0.236726] system 00:01: [io  0x1d00-0x1dfe] has been reserved

[    0.236727] system 00:01: [io  0x1e00-0x1efe] has been reserved

[    0.236728] system 00:01: [io  0x1f00-0x1ffe] has been reserved

[    0.236729] system 00:01: [io  0x1800-0x18fe] has been reserved

[    0.236730] system 00:01: [io  0x164e-0x164f] has been reserved

[    0.236733] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.236748] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.236782] system 00:03: [io  0x1854-0x1857] has been reserved

[    0.236784] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    0.236817] system 00:04: [io  0x04d0-0x04d1] has been reserved

[    0.236819] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.236839] system 00:05: [io  0x0240-0x0259] has been reserved

[    0.236841] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.236879] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)

[    0.236900] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)

[    0.237136] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    0.237138] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved

[    0.237139] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved

[    0.237141] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved

[    0.237142] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved

[    0.237143] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.237144] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved

[    0.237145] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved

[    0.237146] system 00:08: [mem 0xff000000-0xffffffff] has been reserved

[    0.237148] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved

[    0.237149] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved

[    0.237150] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved

[    0.237152] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.237207] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.237419] pnp: PnP ACPI: found 10 devices

[    0.243156] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.243171] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000

[    0.243173] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000

[    0.243174] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000

[    0.243191] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcfe00000-0xcfffffff]

[    0.243195] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2000000-0xf21fffff 64bit pref]

[    0.243197] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]

[    0.243199] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.243200] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    0.243202] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]

[    0.243204] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]

[    0.243207] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.243209] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]

[    0.243213] pci 0000:00:1c.0:   bridge window [mem 0xcfe00000-0xcfffffff]

[    0.243215] pci 0000:00:1c.0:   bridge window [mem 0xf2000000-0xf21fffff 64bit pref]

[    0.243220] pci 0000:00:1c.2: PCI bridge to [bus 03]

[    0.243223] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]

[    0.243227] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]

[    0.243233] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    0.243235] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]

[    0.243239] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]

[    0.243246] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.243247] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.243248] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.243249] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]

[    0.243250] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]

[    0.243250] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]

[    0.243251] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]

[    0.243252] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]

[    0.243253] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]

[    0.243254] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff window]

[    0.243255] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]

[    0.243256] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]

[    0.243257] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]

[    0.243258] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]

[    0.243259] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfffffff]

[    0.243260] pci_bus 0000:02: resource 2 [mem 0xf2000000-0xf21fffff 64bit pref]

[    0.243261] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]

[    0.243262] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]

[    0.243263] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]

[    0.243264] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]

[    0.243357] NET: Registered protocol family 2

[    0.243476] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.243605] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.243715] TCP: Hash tables configured (established 131072 bind 65536)

[    0.243740] UDP hash table entries: 8192 (order: 6, 262144 bytes)

[    0.243774] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)

[    0.243829] NET: Registered protocol family 1

[    0.243840] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.244007] PCI: CLS 64 bytes, default 64

[    0.244031] Unpacking initramfs...

[    0.325414] Freeing initrd memory: 9248K

[    0.325441] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    0.325443] software IO TLB [mem 0xc605d000-0xca05d000] (64MB) mapped at [ffff89a80605d000-ffff89a80a05cfff]

[    0.325575] Scanning for low memory corruption every 60 seconds

[    0.325964] Initialise system trusted keyrings

[    0.325970] Key type blacklist registered

[    0.326013] workingset: timestamp_bits=41 max_order=22 bucket_order=0

[    0.326648] zbud: loaded

[    0.327951] Key type asymmetric registered

[    0.327976] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[    0.328003] io scheduler noop registered

[    0.328003] io scheduler deadline registered

[    0.328029] io scheduler cfq registered

[    0.328030] io scheduler mq-deadline registered

[    0.328030] io scheduler kyber registered

[    0.328046] io scheduler bfq registered

[    0.328059] io scheduler bfq-sq registered (default)

[    0.328060] BFQ I/O-scheduler: v8r12 (with cgroups support)

[    0.328073] io scheduler bfq-mq registered

[    0.328074] BFQ I/O-scheduler: v8r12 (with cgroups support)

[    0.328640] pcieport 0000:00:01.0: Signaling PME with IRQ 26

[    0.328654] pcieport 0000:00:1c.0: Signaling PME with IRQ 27

[    0.328668] pcieport 0000:00:1c.2: Signaling PME with IRQ 28

[    0.328683] pcieport 0000:00:1c.3: Signaling PME with IRQ 29

[    0.328697] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+

[    0.328728] vesafb: mode is 1920x1080x32, linelength=7680, pages=0

[    0.328728] vesafb: scrolling: redraw

[    0.328729] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[    0.328745] vesafb: framebuffer at 0xd0000000, mapped to 0xffffacdc42000000, using 8128k, total 8128k

[    0.451667] Console: switching to colour frame buffer device 240x67

[    0.574009] fb0: VESA VGA frame buffer device

[    0.574019] intel_idle: MWAIT substates: 0x42120

[    0.574020] intel_idle: v0.4.1 model 0x3C

[    0.574126] intel_idle: lapic_timer_reliable_states 0xffffffff

[    0.574345] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.574890] rtc_cmos 00:02: RTC can wake from S4

[    0.574998] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

[    0.575025] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

[    0.575033] intel_pstate: Intel P-state driver initializing

[    0.575185] ledtrig-cpu: registered to indicate activity on CPUs

[    0.575245] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized

[    0.575763] NET: Registered protocol family 10

[    0.585332] Segment Routing with IPv6

[    0.585384] NET: Registered protocol family 17

[    0.585912] RAS: Correctable Errors collector initialized.

[    0.585966] microcode: sig=0x306c3, pf=0x20, revision=0x25

[    0.586113] microcode: Microcode Update Driver: v2.2.

[    0.586134] sched_clock: Marking stable (586099909, 0)->(591308578, -5208669)

[    0.586597] registered taskstats version 1

[    0.586603] Loading compiled-in X.509 certificates

[    0.586619] zswap: loaded using pool lzo/zbud

[    0.589898] Key type big_key registered

[    0.590363]   Magic number: 6:281:208

[    0.590382] vc vcsa: hash matches

[    0.590463] rtc_cmos 00:02: setting system clock to 2018-10-25 02:12:46 UTC (1540433566)

[    0.753935] Freeing unused kernel memory: 1360K

[    0.753937] Write protecting the kernel read-only data: 16384k

[    0.754799] Freeing unused kernel memory: 2016K

[    0.756550] Freeing unused kernel memory: 1216K

[    0.766705] NOHZ: local_softirq_pending 80

[    0.806944] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[    0.814881] i8042: Detected active multiplexing controller, rev 1.1

[    0.816571] ACPI: bus type USB registered

[    0.816590] usbcore: registered new interface driver usbfs

[    0.816599] usbcore: registered new interface driver hub

[    0.816625] usbcore: registered new device driver usb

[    0.817324] SCSI subsystem initialized

[    0.817848] serio: i8042 KBD port at 0x60,0x64 irq 1

[    0.817892] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[    0.817916] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[    0.817938] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[    0.817960] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[    0.820736] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    0.820743] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

[    0.821311] libata version 3.00 loaded.

[    0.821841] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810

[    0.821847] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    0.822068] hub 1-0:1.0: USB hub found

[    0.822085] hub 1-0:1.0: 14 ports detected

[    0.825320] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    0.825324] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

[    0.825328] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed

[    0.825463] hub 2-0:1.0: USB hub found

[    0.825475] hub 2-0:1.0: 4 ports detected

[    0.826088] ahci 0000:00:1f.2: version 3.0

[    0.826237] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode

[    0.826240] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 

[    0.836546] scsi host0: ahci

[    0.836629] scsi host1: ahci

[    0.836726] scsi host2: ahci

[    0.836790] scsi host3: ahci

[    0.836857] scsi host4: ahci

[    0.836887] ata1: DUMMY

[    0.836888] ata2: DUMMY

[    0.836892] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 32

[    0.836892] ata4: DUMMY

[    0.836895] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 32

[    0.875930] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    1.151227] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    1.151260] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    1.153116] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded

[    1.153123] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out

[    1.153128] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out

[    1.153432] usb 1-2: new high-speed USB device number 2 using xhci_hcd

[    1.154380] ata5.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133

[    1.154385] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    1.154802] ata3.00: ATAPI: SlimtypeDVD A  DA8A6SH, GAA2, max UDMA/133

[    1.156270] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded

[    1.156276] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out

[    1.156280] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out

[    1.157537] ata5.00: configured for UDMA/133

[    1.161280] ata3.00: configured for UDMA/133

[    1.167864] scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DA8A6SH   GAA2 PQ: 0 ANSI: 5

[    1.200216] scsi 4:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5

[    1.203357] NOHZ: local_softirq_pending 80

[    1.206688] NOHZ: local_softirq_pending 80

[    1.209030] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    1.209032] sd 4:0:0:0: [sda] 4096-byte physical blocks

[    1.209044] sd 4:0:0:0: [sda] Write Protect is off

[    1.209046] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.209066] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.244765] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[    1.244768] cdrom: Uniform CD-ROM driver Revision: 3.20

[    1.244973] sr 2:0:0:0: Attached scsi CD-ROM sr0

[    1.263433]  sda: sda1 sda2 sda3 sda4 < sda5 >

[    1.264276] sd 4:0:0:0: [sda] Attached SCSI disk

[    1.296187] hub 1-2:1.0: USB hub found

[    1.296480] hub 1-2:1.0: 4 ports detected

[    1.330069] tsc: Refined TSC clocksource calibration: 2793.531 MHz

[    1.330084] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284461bc4f9, max_idle_ns: 440795228872 ns

[    1.416973] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd

[    1.667337] hub 2-2:1.0: USB hub found

[    1.667547] hub 2-2:1.0: 4 ports detected

[    1.786701] usb 1-3: new full-speed USB device number 3 using xhci_hcd

[    1.819636] random: fast init done

[    1.930007] NOHZ: local_softirq_pending 80

[    1.932027] hidraw: raw HID events driver (C) Jiri Kosina

[    1.936106] usbcore: registered new interface driver usbhid

[    1.936108] usbhid: USB HID core driver

[    1.936673] NOHZ: local_softirq_pending 80

[    1.937063] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2

[    2.053371] usb 1-5: new full-speed USB device number 4 using xhci_hcd

[    2.059230] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4055.0004/input/input5

[    2.059304] logitech-hidpp-device 0003:046D:4055.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-3:1

[    2.063626] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

[    2.176680] NOHZ: local_softirq_pending 282

[    2.266824] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd

[    2.340013] NOHZ: local_softirq_pending 282

[    2.343485] clocksource: Switched to clocksource tsc

[    2.346666] NOHZ: local_softirq_pending 82

[    2.406715] usb 1-7: new high-speed USB device number 5 using xhci_hcd

[    2.730003] NOHZ: local_softirq_pending 10

[    2.907819] ip_tables: (C) 2000-2006 Netfilter Core Team

[    2.976795] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)

[    2.993484] systemd[1]: Detected architecture x86-64.

[    3.004726] systemd[1]: Set hostname to <alexandre-pc>.

[    3.236677] NOHZ: local_softirq_pending 80

[    3.331069] random: crng init done

[    4.711555] systemd[1]: Created slice User and Session Slice.

[    4.711608] systemd[1]: Listening on Device-mapper event daemon FIFOs.

[    4.711615] systemd[1]: Reached target Login Prompts.

[    4.711686] systemd[1]: Listening on Journal Socket.

[    4.734898] systemd[1]: Starting Load Kernel Modules...

[    4.736065] systemd[1]: Mounting Kernel Debug File System...

[    4.738328] systemd[1]: Starting Create list of required static device nodes for the current kernel...

[    4.993571] EXT4-fs (sda3): re-mounted. Opts: (null)

[    5.332475] systemd-journald[222]: Received request to flush runtime journal from PID 1

[    6.344409] ACPI: Battery Slot [BAT0] (battery present)

[    6.376915] ACPI: AC Adapter [AC0] (on-line)

[    6.447812] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6

[    6.448487] ACPI: Lid Switch [LID]

[    6.448525] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7

[    6.448541] ACPI: Sleep Button [SLPB]

[    6.448573] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8

[    6.448581] ACPI: Power Button [PWRF]

[    6.491550] i801_smbus 0000:00:1f.3: SPD Write Disable is set

[    6.491576] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[    6.516337] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20170728/utaddress-247)

[    6.516341] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)

[    6.516346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    6.516348] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20170728/utaddress-247)

[    6.516352] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20170728/utaddress-247)

[    6.516355] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)

[    6.516359] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    6.516359] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20170728/utaddress-247)

[    6.516362] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20170728/utaddress-247)

[    6.516366] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)

[    6.516369] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)

[    6.516373] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    6.516373] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20170728/utaddress-247)

[    6.516376] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20170728/utaddress-247)

[    6.516380] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)

[    6.516383] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)

[    6.516387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    6.516387] lpc_ich: Resource conflict(s) found affecting gpio_ich

[    6.525170] EDAC ie31200: No ECC support

[    6.535825] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    6.537038] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input9

[    6.595215] Linux agpgart interface v0.103

[    6.621512] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

[    6.621649] thermal LNXTHERM:00: registered as thermal_zone0

[    6.621650] ACPI: Thermal Zone [THRM] (76 C)

[    7.090004] input: FocalTechPS/2 FocalTech Touchpad as /devices/platform/i8042/serio4/input/input13

[    7.122732] r8168: loading out-of-tree module taints kernel.

[    7.123968] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded

[    7.123976] r8168 0000:04:00.1: can't disable ASPM; OS doesn't have ASPM control

[    7.134959] input: PC Speaker as /devices/platform/pcspkr/input/input14

[    7.137929] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[    7.137932] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com> 

                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 

                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 

[    7.458018] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer

[    7.458019] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules

[    7.458020] RAPL PMU: hw unit of domain package 2^-14 Joules

[    7.458021] RAPL PMU: hw unit of domain dram 2^-14 Joules

[    7.458021] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules

[    7.701215] usbcore: registered new interface driver usb-storage

[    7.718991] mousedev: PS/2 mouse device common for all mice

[    7.736645] scsi host5: uas

[    7.736752] usbcore: registered new interface driver uas

[    7.737116] scsi 5:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6

[    7.737900] sd 5:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)

[    7.737902] sd 5:0:0:0: [sdb] 4096-byte physical blocks

[    7.737977] sd 5:0:0:0: [sdb] Write Protect is off

[    7.737979] sd 5:0:0:0: [sdb] Mode Sense: 4f 00 00 00

[    7.738138] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    7.741103]  sdb: sdb1

[    7.741945] sd 5:0:0:0: [sdb] Attached SCSI disk

[    7.750967] AVX2 version of gcm_enc/dec engaged.

[    7.750968] AES CTR mode by8 optimization enabled

[    7.786464] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.

[    7.786789] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker

[    7.786791] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[    7.786793] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)

[    7.786795] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0

[    7.786796] snd_hda_codec_conexant hdaudioC1D0:    inputs:

[    7.786797] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a

[    7.786799] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19

[    7.787592] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication

[    7.791053] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15

[    7.791179] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16

[    7.791222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17

[    7.826301] media: Linux media interface: v0.10

[    7.829236] [drm] Memory usable by graphics device = 2048M

[    7.829239] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)

[    7.829240] fb: switching to inteldrmfb from VESA VGA

[    7.829261] Console: switching to colour dummy device 80x25

[    7.829980] [drm] Replacing VGA console driver

[    7.836725] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    7.836727] [drm] Driver supports precise vblank timestamp query.

[    7.838763] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    7.841797] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin

[    7.841799] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin

[    7.859448] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0

[    7.859599] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS

[    7.862824] Bluetooth: Core ver 2.22

[    7.862838] NET: Registered protocol family 31

[    7.862839] Bluetooth: HCI device and connection manager initialized

[    7.862842] Bluetooth: HCI socket layer initialized

[    7.862844] Bluetooth: L2CAP socket layer initialized

[    7.862853] Bluetooth: SCO socket layer initialized

[    7.864502] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)

[    7.867408] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input18

[    7.868558] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    7.871577] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19

[    7.876743] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[    7.903732] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'

[    7.903911] rtlwifi: rtlwifi: wireless switch is on

[    7.918194] fbcon: inteldrmfb (fb0) is primary device

[    8.064560] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20

[    8.064596] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21

[    8.064627] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22

[    8.064656] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23

[    8.163292] asus_wmi: ASUS WMI generic driver loaded

[    8.180412] iTCO_vendor_support: vendor-support=0

[    8.180603] asus_wmi: Initialization: 0x1

[    8.180643] asus_wmi: BIOS WMI version: 7.9

[    8.180688] asus_wmi: SFUN value: 0x4a0877

[    8.181849] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input24

[    8.184477] asus_wmi: Number of fans: 1

[    8.219357] MXM: GUID detected in BIOS

[    8.219452] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)

[    8.219792] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 

[    8.219795] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle

[    8.219795] nouveau: detected PR support, will not use DSM

[    8.224435] Linux video capture interface: v2.00

[    8.239703] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[    8.239739] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)

[    8.239816] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    8.266851] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b48c)

[    8.273644] uvcvideo 1-7:1.0: Entity type for entity Extension 2 was not initialized!

[    8.273646] uvcvideo 1-7:1.0: Entity type for entity Extension 5 was not initialized!

[    8.273648] uvcvideo 1-7:1.0: Entity type for entity Processing 3 was not initialized!

[    8.273649] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!

[    8.273730] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25

[    8.273801] usbcore: registered new interface driver uvcvideo

[    8.273801] USB Video Class driver (1.1.1)

[    8.304022] r8168 0000:04:00.1 enp4s0f1: renamed from eth0

[    8.460451] usbcore: registered new interface driver btusb

[    8.466126] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821

[    8.466127] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_config.bin

[    8.510449] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.bin failed with error -2

[    8.510451] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_fw.bin

[    8.543118] Bluetooth: hci0: rom_version status=0 version=1

[    8.543121] Bluetooth: cfg_sz 0, total size 17428

[    8.693869] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0

[    9.132700] intel_rapl: Found RAPL domain package

[    9.132701] intel_rapl: Found RAPL domain core

[    9.132702] intel_rapl: Found RAPL domain uncore

[    9.132702] intel_rapl: Found RAPL domain dram

[    9.132704] intel_rapl: RAPL package 0 domain package locked by BIOS

[    9.132707] intel_rapl: RAPL package 0 domain dram locked by BIOS

[    9.291324] Console: switching to colour frame buffer device 240x67

[    9.311622] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[    9.311726] nouveau 0000:01:00.0: NVIDIA GM107 (1171a0a2)

[    9.337502] nouveau 0000:01:00.0: bios: version 82.07.7c.00.36

[    9.422812] nouveau 0000:01:00.0: fb: 2048 MiB DDR3

[    9.422826] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ IBUS ]

[    9.424075] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]

[   10.510193] vga_switcheroo: enabled

[   10.510279] [TTM] Zone  kernel: Available graphics memory: 6093834 kiB

[   10.510280] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB

[   10.510281] [TTM] Initializing pool allocator

[   10.510283] [TTM] Initializing DMA pool allocator

[   10.510311] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB

[   10.510312] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB

[   10.510314] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid

[   10.510344] nouveau 0000:01:00.0: DRM: DCB version 4.0

[   10.649896] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies

[   10.649912] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1

[   11.816687] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   11.816689] Bluetooth: BNEP filters: protocol multicast

[   11.816694] Bluetooth: BNEP socket layer initialized

[   26.031171] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready

[   26.031359] enp4s0f1: 0xffffacdc41d25000, 9c:5c:8e:2c:06:a8, IRQ 34

[   26.099278] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready

[   26.101549] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   26.433711] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   26.636642] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   26.988561] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   43.485288] logitech-hidpp-device 0003:046D:4055.0004: HID++ 4.5 device connected.

[   62.994986] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   72.150158] Bluetooth: RFCOMM TTY layer initialized

[   72.150166] Bluetooth: RFCOMM socket layer initialized

[   72.150171] Bluetooth: RFCOMM ver 1.11

[   76.615361] fuse init (API version 7.26)

[   93.008795] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   93.232082] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   96.694328] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   99.915019] wlp3s0: authenticate with 68:15:90:34:11:77

[   99.915606] wlp3s0: send auth to 68:15:90:34:11:77 (try 1/3)

[   99.917384] wlp3s0: authenticated

[   99.920044] wlp3s0: associate with 68:15:90:34:11:77 (try 1/3)

[  100.023425] wlp3s0: associate with 68:15:90:34:11:77 (try 2/3)

[  100.126696] wlp3s0: associate with 68:15:90:34:11:77 (try 3/3)

[  100.230106] wlp3s0: association with 68:15:90:34:11:77 timed out

[  100.413719] wlp3s0: authenticate with 68:15:90:34:11:76

[  100.414136] wlp3s0: send auth to 68:15:90:34:11:76 (try 1/3)

[  100.416647] wlp3s0: authenticated

[  100.420006] wlp3s0: associate with 68:15:90:34:11:76 (try 1/3)

[  100.424359] wlp3s0: RX AssocResp from 68:15:90:34:11:76 (capab=0x431 status=0 aid=6)

[  100.424571] wlp3s0: associated

[  100.469287] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready

Dernière modification par saxoalex (25-10-2018 01:19:45)

raleur · 25-10-2018 10:15:11

En bref, aucune trace, même pas un message d'erreur. Il n'est pas détecté par le noyau au plus bas niveau.

PS : pourquoi s'adresser à un forum Debian pour un problème avec Manjaro ?

saxoalex · 25-10-2018 13:48:30

Bah oui donc je comprends pas du tout pourquoi cette machine là spécifiquement ne le détecte pas...

Parce que j'avais mis Manjaro à la place de Debian pour tester et j'ai pas eu le temps de réinstaller Debian (Manjaro me plait pas tellement, y'a pas dpkg)

smolski · 25-10-2018 14:48:01

saxoalex a écrit :

j'avais mis Manjaro à la place de Debian pour tester et j'ai pas eu le temps de réinstaller Debian

Et comment veux-tu alors qu'on t'aide ici ?

saxoalex · 25-10-2018 15:44:36

Je ne pense pas qu'il y ait tant de grosses différences...

Debian-facile

#1 24-10-2018 01:58:00

[Résolu] HDD externe non déctecté

#2 24-10-2018 06:23:40

Re : [Résolu] HDD externe non déctecté

#3 24-10-2018 16:35:26

Re : [Résolu] HDD externe non déctecté

#4 24-10-2018 16:51:05

Re : [Résolu] HDD externe non déctecté

#5 24-10-2018 17:30:01

Re : [Résolu] HDD externe non déctecté

#6 24-10-2018 22:24:40

Re : [Résolu] HDD externe non déctecté

#7 24-10-2018 22:43:09

Re : [Résolu] HDD externe non déctecté

#8 24-10-2018 23:00:51

Re : [Résolu] HDD externe non déctecté

#9 24-10-2018 23:11:10

Re : [Résolu] HDD externe non déctecté

#10 24-10-2018 23:26:39

Re : [Résolu] HDD externe non déctecté

#11 25-10-2018 01:19:16

Re : [Résolu] HDD externe non déctecté

#12 25-10-2018 10:15:11

Re : [Résolu] HDD externe non déctecté

#13 25-10-2018 13:48:30

Re : [Résolu] HDD externe non déctecté

#14 25-10-2018 14:48:01

Re : [Résolu] HDD externe non déctecté

#15 25-10-2018 15:44:36

Re : [Résolu] HDD externe non déctecté

Pied de page des forums