Vous allez dire que je suis con, et ce serait légitime, mais j'ai reessayé sur un autre Debian et ça a marché (port USB2). Alors c'est peut être ma machine qui a eu un problème... Pour la forme :
[ 0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=ec2c60ad-54a3-4d2b-98e7-e4830f933860 ro quiet
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e9e00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffc6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dffc7000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Hewlett-Packard HP xw9400 Workstation/0A1Ch, BIOS 786D6 v02.21 06/25/2007
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000220000000 aka 8704M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdffc7 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff9a7e000fe700]
[ 0.000000] Base memory trampoline at [ffff9a7e00096000] 96000 size 24576
[ 0.000000] BRK [0x9933a000, 0x9933afff] PGTABLE
[ 0.000000] BRK [0x9933b000, 0x9933bfff] PGTABLE
[ 0.000000] BRK [0x9933c000, 0x9933cfff] PGTABLE
[ 0.000000] BRK [0x9933d000, 0x9933dfff] PGTABLE
[ 0.000000] BRK [0x9933e000, 0x9933efff] PGTABLE
[ 0.000000] BRK [0x9933f000, 0x9933ffff] PGTABLE
[ 0.000000] BRK [0x99340000, 0x99340fff] PGTABLE
[ 0.000000] BRK [0x99341000, 0x99341fff] PGTABLE
[ 0.000000] BRK [0x99342000, 0x99342fff] PGTABLE
[ 0.000000] BRK [0x99343000, 0x99343fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35cc9000-0x36e5bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000E9E10 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 0x00000000DFFCA474 00006C (v01 HPQOEM SLIC-WKS 20070625 00000000)
[ 0.000000] ACPI: FACP 0x00000000DFFCA61C 0000F4 (v03 HP COBRA 00000001 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160831/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160831/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160831/tbfadt-708)
[ 0.000000] ACPI: DSDT 0x00000000DFFCAA92 002159 (v01 HP DSDT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000DFFCA200 000040
[ 0.000000] ACPI: FACS 0x00000000DFFCA200 000040
[ 0.000000] ACPI: SSDT 0x00000000DFFCCBEB 00794A (v02 HP PROJECT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: APIC 0x00000000DFFCA710 0000A6 (v01 HP COBRA 00000001 00000000)
[ 0.000000] ACPI: ASF! 0x00000000DFFCA7F4 000063 (v32 HP COBRA 00000001 00000000)
[ 0.000000] ACPI: WDRT 0x00000000DFFCA857 000047 (v01 HP COBRA 00000001 00000000)
[ 0.000000] ACPI: SRAT 0x00000000DFFCA2EC 000150 (v02 HP COBRA 00000001 00000000)
[ 0.000000] ACPI: MCFG 0x00000000DFFCA89E 00004C (v01 HP COBRA 00000001 00000000)
[ 0.000000] ACPI: SLIC 0x00000000DFFCA8EA 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
[ 0.000000] ACPI: TCPA 0x00000000DFFCAA60 000032 (v01 HP COBRA 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x000e8000-0xdfffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x120000000-0x21fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x000e8000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11fffb000-0x11fffffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x21fff7000-0x21fffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffc6fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] node 1: [mem 0x0000000120000000-0x000000021fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.000000] On node 0 totalpages: 1048418
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14272 pages used for memmap
[ 0.000000] DMA32 zone: 913351 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] Initmem setup node 1 [mem 0x0000000120000000-0x000000021fffffff]
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xfa200000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ea000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffc7000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9a7f1bc00000 s105304 r8192 d29864 u524288
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 2 4 6 [1] 1 3 5 7
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2064205
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=ec2c60ad-54a3-4d2b-98e7-e4830f933860 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[ 0.000000] Memory: 8090456K/8387976K available (6254K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 297520K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:896 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2599.986 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.97 BogoMIPS (lpj=10399944)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004053] ACPI: Core revision 20160831
[ 0.012879] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.012993] Security Framework initialized
[ 0.012995] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.013002] AppArmor: AppArmor disabled by boot time parameter
[ 0.013745] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.018803] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.021128] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.021146] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.021681] mce: CPU supports 5 MCE banks
[ 0.021687] LVT offset 0 assigned for vector 0xf9
[ 0.021691] process: using AMD E400 aware idle routine
[ 0.021693] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.021694] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.021696] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.021729] Spectre V2 : Mitigation: Full generic retpoline
[ 0.021730] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.022002] Freeing SMP alternatives memory: 24K
[ 0.023809] ftrace: allocating 25284 entries in 99 pages
[ 0.040191] smpboot: Max logical packages: 4
[ 0.044749] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.088000] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 2218 (family: 0xf, model: 0x41, stepping: 0x3)
[ 0.088000] Performance Events: AMD PMU driver.
[ 0.088000] ... version: 0
[ 0.088000] ... bit width: 48
[ 0.088000] ... generic registers: 4
[ 0.088000] ... value mask: 0000ffffffffffff
[ 0.088000] ... max period: 00007fffffffffff
[ 0.088000] ... fixed-purpose events: 0
[ 0.088000] ... event mask: 000000000000000f
[ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088000] x86: Booting SMP configuration:
[ 0.088000] .... node #1, CPUs: #1
[ 0.164170] .... node #0, CPUs: #2
[ 0.244230] .... node #1, CPUs: #3
[ 0.324053] x86: Booted up 2 nodes, 4 CPUs
[ 0.324053] smpboot: Total of 4 processors activated (20800.91 BogoMIPS)
[ 0.325513] devtmpfs: initialized
[ 0.325513] x86/mm: Memory block size: 128MB
[ 0.331387] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.331387] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.331387] pinctrl core: initialized pinctrl subsystem
[ 0.331387] NET: Registered protocol family 16
[ 0.344006] cpuidle: using governor ladder
[ 0.360005] cpuidle: using governor menu
[ 0.360010] node 0 link 2: io port [4000, 4fff]
[ 0.360013] node 1 link 0: io port [1000, 3fff]
[ 0.360014] node 1 link 0: io port [e000, efff]
[ 0.360016] TOM: 00000000e0000000 aka 3584M
[ 0.360018] node 1 link 0: mmio [a0000, bffff]
[ 0.360020] node 1 link 0: mmio [f4000000, f7ffffff]
[ 0.360022] node 1 link 0: mmio [e0000000, efffffff]
[ 0.360024] node 1 link 0: mmio [f8000000, fa2fffff]
[ 0.360025] node 0 link 2: mmio [fa300000, fa3fffff]
[ 0.360027] node 0 link 2: mmio [fa400000, fa5fffff]
[ 0.360028] TOM2: 0000000220000000 aka 8704M
[ 0.360031] bus: [bus 00-3f] on node 0 link 2
[ 0.360032] bus: 00 [io 0x4000-0xdfff]
[ 0.360033] bus: 00 [io 0x0000-0x0fff]
[ 0.360034] bus: 00 [io 0xf000-0xffff]
[ 0.360034] bus: 00 [mem 0xfa300000-0xffffffff]
[ 0.360035] bus: 00 [mem 0xf0000000-0xf3ffffff]
[ 0.360036] bus: 00 [mem 0x220000000-0xfcffffffff]
[ 0.360037] bus: [bus 40-ff] on node 1 link 0
[ 0.360038] bus: 40 [io 0x1000-0x3fff]
[ 0.360039] bus: 40 [io 0xe000-0xefff]
[ 0.360040] bus: 40 [mem 0x000a0000-0x000bffff]
[ 0.360040] bus: 40 [mem 0xf4000000-0xfa2fffff]
[ 0.360041] bus: 40 [mem 0xe0000000-0xefffffff]
[ 0.360071] ACPI: bus type PCI registered
[ 0.360073] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.360176] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.360178] PCI: MMCONFIG for domain 0001 [bus 40-7f] at [mem 0xf4000000-0xf7ffffff] (base 0xf0000000)
[ 0.360180] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.360181] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.360197] PCI: Using configuration type 1 for base access
[ 0.360418] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.360418] mtrr: probably your BIOS does not setup all CPUs.
[ 0.360419] mtrr: corrected configuration.
[ 0.376054] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.376126] ACPI: Added _OSI(Module Device)
[ 0.376128] ACPI: Added _OSI(Processor Device)
[ 0.376129] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.376130] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.380813] ACPI: Interpreter enabled
[ 0.380840] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.380842] ACPI: Using IOAPIC for interrupt routing
[ 0.380881] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388047] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.388054] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.388060] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.388768] PCI host bridge to bus 0000:00
[ 0.388771] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.388773] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.388774] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
[ 0.388776] pci_bus 0000:00: root bus resource [mem 0xfa300000-0xfa3fffff window]
[ 0.388778] pci_bus 0000:00: root bus resource [mem 0xfa400000-0xfa5fffff window]
[ 0.388779] pci_bus 0000:00: root bus resource [io 0x4000-0x4fff window]
[ 0.388781] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.388800] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000
[ 0.389040] pci 0000:00:01.0: [10de:0364] type 00 class 0x060100
[ 0.389065] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.389155] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500
[ 0.389178] pci 0000:00:01.1: reg 0x20: [io 0x4000-0x403f]
[ 0.389183] pci 0000:00:01.1: reg 0x24: [io 0x4040-0x407f]
[ 0.389211] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.389319] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310
[ 0.389325] pci 0000:00:02.0: reg 0x10: [mem 0xfa344000-0xfa344fff]
[ 0.389355] pci 0000:00:02.0: supports D1 D2
[ 0.389356] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.389405] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.389460] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320
[ 0.389466] pci 0000:00:02.1: reg 0x10: [mem 0xfa34a000-0xfa34a0ff]
[ 0.389495] pci 0000:00:02.1: supports D1 D2
[ 0.389496] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.389544] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.389598] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a
[ 0.389612] pci 0000:00:04.0: reg 0x20: [io 0x4080-0x408f]
[ 0.389619] pci 0000:00:04.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.389621] pci 0000:00:04.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.389622] pci 0000:00:04.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.389624] pci 0000:00:04.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.389719] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185
[ 0.389725] pci 0000:00:05.0: reg 0x10: [io 0x40c0-0x40c7]
[ 0.389729] pci 0000:00:05.0: reg 0x14: [io 0x4100-0x4103]
[ 0.389732] pci 0000:00:05.0: reg 0x18: [io 0x40c8-0x40cf]
[ 0.389736] pci 0000:00:05.0: reg 0x1c: [io 0x4104-0x4107]
[ 0.389740] pci 0000:00:05.0: reg 0x20: [io 0x4090-0x409f]
[ 0.389744] pci 0000:00:05.0: reg 0x24: [mem 0xfa345000-0xfa345fff]
[ 0.389843] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185
[ 0.389850] pci 0000:00:05.1: reg 0x10: [io 0x40d0-0x40d7]
[ 0.389853] pci 0000:00:05.1: reg 0x14: [io 0x4108-0x410b]
[ 0.389857] pci 0000:00:05.1: reg 0x18: [io 0x40d8-0x40df]
[ 0.389861] pci 0000:00:05.1: reg 0x1c: [io 0x410c-0x410f]
[ 0.389864] pci 0000:00:05.1: reg 0x20: [io 0x40a0-0x40af]
[ 0.389868] pci 0000:00:05.1: reg 0x24: [mem 0xfa346000-0xfa346fff]
[ 0.389967] pci 0000:00:05.2: [10de:037f] type 00 class 0x010185
[ 0.389973] pci 0000:00:05.2: reg 0x10: [io 0x40e0-0x40e7]
[ 0.389977] pci 0000:00:05.2: reg 0x14: [io 0x4110-0x4113]
[ 0.389981] pci 0000:00:05.2: reg 0x18: [io 0x40e8-0x40ef]
[ 0.389984] pci 0000:00:05.2: reg 0x1c: [io 0x4114-0x4117]
[ 0.389988] pci 0000:00:05.2: reg 0x20: [io 0x40b0-0x40bf]
[ 0.389992] pci 0000:00:05.2: reg 0x24: [mem 0xfa347000-0xfa347fff]
[ 0.390095] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401
[ 0.390202] pci 0000:00:06.1: [10de:0371] type 00 class 0x040300
[ 0.390209] pci 0000:00:06.1: reg 0x10: [mem 0xfa340000-0xfa343fff]
[ 0.390243] pci 0000:00:06.1: PME# supported from D3hot D3cold
[ 0.390337] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000
[ 0.390345] pci 0000:00:08.0: reg 0x10: [mem 0xfa348000-0xfa348fff]
[ 0.390349] pci 0000:00:08.0: reg 0x14: [io 0x40f0-0x40f7]
[ 0.390353] pci 0000:00:08.0: reg 0x18: [mem 0xfa34a100-0xfa34a1ff]
[ 0.390357] pci 0000:00:08.0: reg 0x1c: [mem 0xfa34a300-0xfa34a30f]
[ 0.390384] pci 0000:00:08.0: supports D1 D2
[ 0.390386] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390437] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 0.390491] pci 0000:00:09.0: [10de:0373] type 00 class 0x068000
[ 0.390498] pci 0000:00:09.0: reg 0x10: [mem 0xfa349000-0xfa349fff]
[ 0.390502] pci 0000:00:09.0: reg 0x14: [io 0x40f8-0x40ff]
[ 0.390506] pci 0000:00:09.0: reg 0x18: [mem 0xfa34a200-0xfa34a2ff]
[ 0.390510] pci 0000:00:09.0: reg 0x1c: [mem 0xfa34a310-0xfa34a31f]
[ 0.390538] pci 0000:00:09.0: supports D1 D2
[ 0.390539] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390590] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.390645] pci 0000:00:0d.0: [10de:0378] type 01 class 0x060400
[ 0.390673] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390777] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.390880] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.390972] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.391063] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.391153] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[ 0.391252] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[ 0.391338] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[ 0.391430] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[ 0.391592] pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010
[ 0.391602] pci 0000:01:05.0: reg 0x10: [mem 0xfa404000-0xfa4047ff]
[ 0.391608] pci 0000:01:05.0: reg 0x14: [mem 0xfa400000-0xfa403fff]
[ 0.391651] pci 0000:01:05.0: supports D1 D2
[ 0.391653] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.391726] pci 0000:00:06.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.391729] pci 0000:00:06.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.391732] pci 0000:00:06.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.391734] pci 0000:00:06.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.391735] pci 0000:00:06.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode)
[ 0.391737] pci 0000:00:06.0: bridge window [mem 0xfa300000-0xfa3fffff window] (subtractive decode)
[ 0.391739] pci 0000:00:06.0: bridge window [mem 0xfa400000-0xfa5fffff window] (subtractive decode)
[ 0.391741] pci 0000:00:06.0: bridge window [io 0x4000-0x4fff window] (subtractive decode)
[ 0.391803] pci 0000:2b:00.0: [1033:0125] type 01 class 0x060400
[ 0.391859] pci 0000:2b:00.0: supports D1
[ 0.391860] pci 0000:2b:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.391947] pci 0000:2b:00.1: [1033:0125] type 01 class 0x060400
[ 0.391966] pci 0000:2b:00.1: reg 0x10: [mem 0xfa500000-0xfa50007f 64bit]
[ 0.392032] pci 0000:2b:00.1: supports D1
[ 0.392034] pci 0000:2b:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.392120] pci 0000:2b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.392128] pci 0000:00:0d.0: PCI bridge to [bus 2b-2d]
[ 0.392132] pci 0000:00:0d.0: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.392242] pci 0000:2b:00.0: PCI bridge to [bus 2c]
[ 0.392336] pci 0000:2b:00.1: PCI bridge to [bus 2d]
[ 0.392360] pci_bus 0000:00: on NUMA node 0
[ 0.393530] ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 40-ff])
[ 0.393534] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.393540] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.393584] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0001 [bus 40-7f] only partially covers this bridge
[ 0.394238] PCI host bridge to bus 0001:40
[ 0.394240] pci_bus 0001:40: root bus resource [io 0x03b0-0x03bb window]
[ 0.394242] pci_bus 0001:40: root bus resource [io 0x03c0-0x03df window]
[ 0.394244] pci_bus 0001:40: root bus resource [io 0x1000-0x3fff window]
[ 0.394245] pci_bus 0001:40: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.394247] pci_bus 0001:40: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.394249] pci_bus 0001:40: root bus resource [mem 0xf8000000-0xfa2fffff window]
[ 0.394251] pci_bus 0001:40: root bus resource [bus 40-ff]
[ 0.394267] pci 0001:40:00.0: [10de:0369] type 00 class 0x050000
[ 0.394465] pci 0001:40:01.0: [10de:0361] type 00 class 0x050000
[ 0.394472] pci 0001:40:01.0: reg 0x14: [mem 0xfa200000-0xfa200fff]
[ 0.394487] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.394553] pci 0001:40:01.1: [10de:0368] type 00 class 0x0c0500
[ 0.394573] pci 0001:40:01.1: reg 0x20: [io 0x3000-0x303f]
[ 0.394578] pci 0001:40:01.1: reg 0x24: [io 0x3040-0x307f]
[ 0.394603] pci 0001:40:01.1: PME# supported from D3hot D3cold
[ 0.394683] pci 0001:40:0a.0: [10de:0376] type 01 class 0x060400
[ 0.394707] pci 0001:40:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394781] pci 0001:40:0d.0: [10de:0378] type 01 class 0x060400
[ 0.394804] pci 0001:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394879] pci 0001:40:0f.0: [10de:0377] type 01 class 0x060400
[ 0.394902] pci 0001:40:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.395045] pci 0001:45:00.0: [104d:9020] type 00 class 0x040000
[ 0.395060] pci 0001:45:00.0: reg 0x10: [mem 0xfa100000-0xfa107fff]
[ 0.395152] pci 0001:45:00.0: supports D1 D2
[ 0.395208] pci 0001:45:00.0: System wakeup disabled by ACPI
[ 0.404018] pci 0001:40:0a.0: PCI bridge to [bus 45]
[ 0.404021] pci 0001:40:0a.0: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.404079] pci 0001:6b:00.0: [1000:0058] type 00 class 0x010000
[ 0.404088] pci 0001:6b:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.404097] pci 0001:6b:00.0: reg 0x14: [mem 0xfa010000-0xfa013fff 64bit]
[ 0.404105] pci 0001:6b:00.0: reg 0x1c: [mem 0xfa000000-0xfa00ffff 64bit]
[ 0.404115] pci 0001:6b:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
[ 0.404148] pci 0001:6b:00.0: supports D1 D2
[ 0.416009] pci 0001:40:0d.0: PCI bridge to [bus 6b]
[ 0.416011] pci 0001:40:0d.0: bridge window [io 0x1000-0x1fff]
[ 0.416013] pci 0001:40:0d.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.416077] pci 0001:58:00.0: [10de:029e] type 00 class 0x030000
[ 0.416085] pci 0001:58:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
[ 0.416092] pci 0001:58:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.416099] pci 0001:58:00.0: reg 0x1c: [mem 0xf9000000-0xf9ffffff 64bit]
[ 0.416103] pci 0001:58:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.416108] pci 0001:58:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.416179] pci 0001:58:00.0: System wakeup disabled by ACPI
[ 0.428008] pci 0001:40:0f.0: PCI bridge to [bus 58]
[ 0.428011] pci 0001:40:0f.0: bridge window [io 0x2000-0x2fff]
[ 0.428013] pci 0001:40:0f.0: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.428015] pci 0001:40:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.428021] pci_bus 0001:40: on NUMA node 1
[ 0.428160] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 16 17 18 19 20 21 22 23)
[ 0.428283] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)
[ 0.428403] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11
[ 0.428523] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 16 17 18 19 20 21 22 23)
[ 0.428645] ACPI: PCI Interrupt Link [LXPA] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.428767] ACPI: PCI Interrupt Link [LXPB] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.428888] ACPI: PCI Interrupt Link [LXPC] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.429008] ACPI: PCI Interrupt Link [LXPD] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.429053] ACPI: PCI Interrupt Link [LXA2] (IRQs *40), disabled.
[ 0.429094] ACPI: PCI Interrupt Link [LXB2] (IRQs *41), disabled.
[ 0.429135] ACPI: PCI Interrupt Link [LXC2] (IRQs *42), disabled.
[ 0.429175] ACPI: PCI Interrupt Link [LXD2] (IRQs *43), disabled.
[ 0.429293] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)
[ 0.429412] ACPI: PCI Interrupt Link [LSB0] (IRQs *5 7 10 16 17 18 19 20 21 22 23)
[ 0.429531] ACPI: PCI Interrupt Link [LSB2] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)
[ 0.429652] ACPI: PCI Interrupt Link [LMC0] (IRQs *5 7 10 16 17 18 19 20 21 22 23)
[ 0.429773] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)
[ 0.429893] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11
[ 0.430014] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.430136] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11
[ 0.430256] ACPI: PCI Interrupt Link [LSA1] (IRQs *5 7 10 16 17 18 19 20 21 22 23)
[ 0.430377] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 *10 16 17 18 19 20 21 22 23)
[ 0.430684] vgaarb: setting as boot device: PCI:0001:58:00.0
[ 0.430684] vgaarb: device added: PCI:0001:58:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.430684] vgaarb: loaded
[ 0.430684] vgaarb: bridge control possible 0001:58:00.0
[ 0.430684] PCI: Using ACPI for IRQ routing
[ 0.432024] PCI: pci_cache_line_size set to 64 bytes
[ 0.432086] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.432088] e820: reserve RAM buffer [mem 0xdffc7000-0xdfffffff]
[ 0.432253] clocksource: Switched to clocksource refined-jiffies
[ 0.444628] VFS: Disk quotas dquot_6.6.0
[ 0.444669] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.444812] pnp: PnP ACPI init
[ 0.444989] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.445033] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.445074] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.445335] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.445522] pnp 00:04: [dma 2]
[ 0.445560] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.445729] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.445733] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.445833] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.445835] system 00:06: [io 0x0480-0x048f] has been reserved
[ 0.445837] system 00:06: [io 0x04c0-0x04cb] has been reserved
[ 0.445840] system 00:06: [io 0xe000-0xe07f] has been reserved
[ 0.445842] system 00:06: [io 0xe080-0xe0ff] has been reserved
[ 0.445844] system 00:06: [io 0xf200-0xf27f] has been reserved
[ 0.445846] system 00:06: [io 0xf280-0xf2ff] has been reserved
[ 0.445848] system 00:06: [io 0xf800-0xf87f] has been reserved
[ 0.445850] system 00:06: [io 0xf880-0xf8ff] has been reserved
[ 0.445852] system 00:06: [io 0xf900-0xf97f] has been reserved
[ 0.445854] system 00:06: [io 0xf980-0xf9ff] has been reserved
[ 0.445856] system 00:06: [io 0xfa00-0xfa7f] has been reserved
[ 0.445858] system 00:06: [io 0xfa80-0xfaff] has been reserved
[ 0.445860] system 00:06: [io 0xfc00-0xfc7f] has been reserved
[ 0.445862] system 00:06: [io 0xfc80-0xfcff] has been reserved
[ 0.445864] system 00:06: [io 0xfe00-0xfe7f] has been reserved
[ 0.445866] system 00:06: [io 0xfe80-0xfeff] has been reserved
[ 0.445869] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.446514] pnp 00:07: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.446516] pnp 00:07: disabling [mem 0x000e8000-0x000fffff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.446518] pnp 00:07: disabling [mem 0x000dce00-0x000e7fff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.446553] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.446556] system 00:07: [mem 0xfec01000-0xffffffff] could not be reserved
[ 0.446559] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.446619] system 00:08: [mem 0xf0000000-0xf7ffffff window] has been reserved
[ 0.446621] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.446633] pnp: PnP ACPI: found 9 devices
[ 0.453743] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.453761] clocksource: Switched to clocksource acpi_pm
[ 0.453795] pci 0000:00:06.0: PCI bridge to [bus 01]
[ 0.453799] pci 0000:00:06.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.453803] pci 0000:2b:00.0: PCI bridge to [bus 2c]
[ 0.453812] pci 0000:2b:00.1: PCI bridge to [bus 2d]
[ 0.453824] pci 0000:00:0d.0: PCI bridge to [bus 2b-2d]
[ 0.453826] pci 0000:00:0d.0: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.453831] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.453833] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.453835] pci_bus 0000:00: resource 6 [io 0x0d00-0x0fff window]
[ 0.453836] pci_bus 0000:00: resource 7 [mem 0xfa300000-0xfa3fffff window]
[ 0.453838] pci_bus 0000:00: resource 8 [mem 0xfa400000-0xfa5fffff window]
[ 0.453840] pci_bus 0000:00: resource 9 [io 0x4000-0x4fff window]
[ 0.453842] pci_bus 0000:01: resource 1 [mem 0xfa400000-0xfa4fffff]
[ 0.453843] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window]
[ 0.453845] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.453846] pci_bus 0000:01: resource 6 [io 0x0d00-0x0fff window]
[ 0.453848] pci_bus 0000:01: resource 7 [mem 0xfa300000-0xfa3fffff window]
[ 0.453850] pci_bus 0000:01: resource 8 [mem 0xfa400000-0xfa5fffff window]
[ 0.453851] pci_bus 0000:01: resource 9 [io 0x4000-0x4fff window]
[ 0.453853] pci_bus 0000:2b: resource 1 [mem 0xfa500000-0xfa5fffff]
[ 0.453900] pci 0001:40:0a.0: PCI bridge to [bus 45]
[ 0.453902] pci 0001:40:0a.0: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.453909] pci 0001:6b:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 0.453911] pci 0001:6b:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 0.453913] pci 0001:40:0d.0: PCI bridge to [bus 6b]
[ 0.453914] pci 0001:40:0d.0: bridge window [io 0x1000-0x1fff]
[ 0.453916] pci 0001:40:0d.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.453921] pci 0001:58:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[ 0.453923] pci 0001:58:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[ 0.453924] pci 0001:40:0f.0: PCI bridge to [bus 58]
[ 0.453926] pci 0001:40:0f.0: bridge window [io 0x2000-0x2fff]
[ 0.453928] pci 0001:40:0f.0: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.453930] pci 0001:40:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.453933] pci_bus 0001:40: resource 4 [io 0x03b0-0x03bb window]
[ 0.453935] pci_bus 0001:40: resource 5 [io 0x03c0-0x03df window]
[ 0.453937] pci_bus 0001:40: resource 6 [io 0x1000-0x3fff window]
[ 0.453938] pci_bus 0001:40: resource 7 [mem 0x000a0000-0x000bffff window]
[ 0.453940] pci_bus 0001:40: resource 8 [mem 0xe0000000-0xefffffff window]
[ 0.453941] pci_bus 0001:40: resource 9 [mem 0xf8000000-0xfa2fffff window]
[ 0.453944] pci_bus 0001:45: resource 1 [mem 0xfa100000-0xfa1fffff]
[ 0.453945] pci_bus 0001:6b: resource 0 [io 0x1000-0x1fff]
[ 0.453947] pci_bus 0001:6b: resource 1 [mem 0xfa000000-0xfa0fffff]
[ 0.453949] pci_bus 0001:58: resource 0 [io 0x2000-0x2fff]
[ 0.453950] pci_bus 0001:58: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.453952] pci_bus 0001:58: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.454076] NET: Registered protocol family 2
[ 0.454386] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.454741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.455240] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.455334] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.455415] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.455621] NET: Registered protocol family 1
[ 0.455948] ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 23
[ 0.512295] ACPI: PCI Interrupt Link [LSB2] enabled at IRQ 22
[ 0.512501] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512542] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512583] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512625] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512668] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512715] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512765] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512817] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.512913] pci 0001:40:00.0: Found enabled HT MSI Mapping
[ 0.512952] pci 0001:40:00.0: Found enabled HT MSI Mapping
[ 0.512993] pci 0001:40:00.0: Found enabled HT MSI Mapping
[ 0.513008] pci 0001:58:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.513010] PCI: CLS 64 bytes, default 64
[ 0.513088] Unpacking initramfs...
[ 0.894196] Freeing initrd memory: 17996K
[ 0.895035] PCI-DMA: Disabling AGP.
[ 0.895154] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.895155] PCI-DMA: using GART IOMMU.
[ 0.895158] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.898260] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a2ed2992, max_idle_ns: 440795215955 ns
[ 0.899046] audit: initializing netlink subsys (disabled)
[ 0.899083] audit: type=2000 audit(1540422931.895:1): initialized
[ 0.899691] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.899819] zbud: loaded
[ 0.901168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.901243] io scheduler noop registered
[ 0.901244] io scheduler deadline registered
[ 0.901271] io scheduler cfq registered (default)
[ 0.901884] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.901892] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.902170] GHES: HEST is not enabled!
[ 0.902264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.922765] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.923494] hpet_acpi_add: no address or irqs in _CRS
[ 0.923514] Linux agpgart interface v0.103
[ 0.923612] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.923613] AMD IOMMUv2 functionality not available on this system
[ 0.924113] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.926697] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.926703] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.926927] mousedev: PS/2 mouse device common for all mice
[ 0.926993] rtc_cmos 00:00: RTC can wake from S4
[ 0.927185] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.927217] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.927312] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.928420] NET: Registered protocol family 10
[ 0.928775] mip6: Mobile IPv6
[ 0.928778] NET: Registered protocol family 17
[ 0.928781] mpls_gso: MPLS GSO support
[ 0.929312] registered taskstats version 1
[ 0.929342] zswap: loaded using pool lzo/zbud
[ 0.929571] ima: No TPM chip found, activating TPM-bypass!
[ 0.929575] ima: Allocated hash algorithm: sha256
[ 0.930122] rtc_cmos 00:00: setting system clock to 2018-10-24 23:15:32 UTC (1540422932)
[ 0.930176] PM: Hibernation image not present or could not be loaded.
[ 0.932100] Freeing unused kernel memory: 1420K
[ 0.932104] Write protecting the kernel read-only data: 12288k
[ 0.933616] Freeing unused kernel memory: 1920K
[ 0.937225] Freeing unused kernel memory: 1224K
[ 0.945729] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.965320] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.965420] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.965432] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.002318] Floppy drive(s): fd0 is 1.44M
[ 1.006679] i2c i2c-0: nForce2 SMBus adapter at 0x4000
[ 1.006719] i2c i2c-1: nForce2 SMBus adapter at 0x4040
[ 1.006854] i2c i2c-2: nForce2 SMBus adapter at 0x3000
[ 1.006880] i2c i2c-3: nForce2 SMBus adapter at 0x3040
[ 1.011437] SCSI subsystem initialized
[ 1.012270] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.012697] ACPI: PCI Interrupt Link [LMC0] enabled at IRQ 21
[ 1.016240] ACPI: bus type USB registered
[ 1.016286] usbcore: registered new interface driver usbfs
[ 1.016299] usbcore: registered new interface driver hub
[ 1.016355] usbcore: registered new device driver usb
[ 1.017392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.017446] Fusion MPT base driver 3.04.20
[ 1.017449] Copyright (c) 1999-2008 LSI Corporation
[ 1.017668] ehci-pci: EHCI PCI platform driver
[ 1.018266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.018484] libata version 3.00 loaded.
[ 1.019228] Fusion MPT SAS Host driver 3.04.20
[ 1.019445] ACPI: PCI Interrupt Link [LXD2] enabled at IRQ 43
[ 1.020217] mptbase: ioc0: Initiating bringup
[ 1.022967] FDC 0 is a post-1991 82077
[ 1.040057] firewire_ohci 0000:01:05.0: enabling device (0000 -> 0002)
[ 1.040359] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 20
[ 1.100055] firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.556599] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:1c:c4:18:51:92
[ 1.556603] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.557008] ACPI: PCI Interrupt Link [LMC1] enabled at IRQ 19
[ 1.632137] firewire_core 0000:01:05.0: created device fw0: GUID 0060b0000023f144, S400
[ 2.008022] ioc0:
[ 2.008026] LSISAS1068E B1:
[ 2.008027] Capabilities={
[ 2.008027] Initiator
[ 2.008028] }
[ 2.100529] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1c:c4:18:51:93
[ 2.100531] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.100716] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 2.100725] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.100737] ehci-pci 0000:00:02.1: debug port 1
[ 2.100765] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 2.100789] ehci-pci 0000:00:02.1: irq 22, io mem 0xfa34a000
[ 2.101642] forcedeth 0000:00:08.0 enp0s8: renamed from eth0
[ 2.116038] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.116111] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.116113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.116115] usb usb1: Product: EHCI Host Controller
[ 2.116116] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[ 2.116117] usb usb1: SerialNumber: 0000:00:02.1
[ 2.116292] hub 1-0:1.0: USB hub found
[ 2.116305] hub 1-0:1.0: 10 ports detected
[ 2.117033] ohci-pci: OHCI PCI platform driver
[ 2.117055] sata_nv 0000:00:05.0: version 3.5
[ 2.117345] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 18
[ 2.117374] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 2.118332] scsi host0: sata_nv
[ 2.118490] scsi host1: sata_nv
[ 2.118547] ata1: SATA max UDMA/133 cmd 0x40c0 ctl 0x4100 bmdma 0x4090 irq 18
[ 2.118548] ata2: SATA max UDMA/133 cmd 0x40c8 ctl 0x4104 bmdma 0x4098 irq 18
[ 2.118805] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 17
[ 2.118821] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 2.119350] scsi host2: sata_nv
[ 2.119484] scsi host3: sata_nv
[ 2.119539] ata3: SATA max UDMA/133 cmd 0x40d0 ctl 0x4108 bmdma 0x40a0 irq 17
[ 2.119540] ata4: SATA max UDMA/133 cmd 0x40d8 ctl 0x410c bmdma 0x40a8 irq 17
[ 2.119755] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 16
[ 2.119770] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 2.120211] scsi host4: sata_nv
[ 2.120323] scsi host5: sata_nv
[ 2.120379] ata5: SATA max UDMA/133 cmd 0x40e0 ctl 0x4110 bmdma 0x40b0 irq 16
[ 2.120380] ata6: SATA max UDMA/133 cmd 0x40e8 ctl 0x4114 bmdma 0x40b8 irq 16
[ 2.120426] pata_amd 0000:00:04.0: version 0.4.1
[ 2.121392] scsi host6: pata_amd
[ 2.121538] scsi host7: pata_amd
[ 2.121591] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14
[ 2.121592] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15
[ 2.121912] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 2.121920] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.121973] ohci-pci 0000:00:02.0: irq 23, io mem 0xfa344000
[ 2.124503] forcedeth 0000:00:09.0 enp0s9: renamed from eth1
[ 2.182098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.182100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.182101] usb usb2: Product: OHCI PCI host controller
[ 2.182102] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ohci_hcd
[ 2.182104] usb usb2: SerialNumber: 0000:00:02.0
[ 2.182285] hub 2-0:1.0: USB hub found
[ 2.182296] hub 2-0:1.0: 10 ports detected
[ 2.300387] ata7.00: ATAPI: HL-DT-STDVD+-RW GSA-H21L, W516, max UDMA/44
[ 2.300397] ata7: nv_mode_filter: 0xf39f&0xf39f->0xf39f, BIOS=0x0 (0x0) ACPI=0xf01f (39:4294967295:0x13)
[ 2.324346] ata7.00: configured for UDMA/44
[ 2.434455] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.434485] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.588031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.590317] ata1.00: ATA-7: ST3250620AS, 3.AHG, max UDMA/100
[ 2.590320] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.594815] ata1.00: configured for UDMA/100
[ 2.595205] scsi 0:0:0:0: Direct-Access ATA ST3250620AS G PQ: 0 ANSI: 5
[ 2.637384] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.637519] sd 0:0:0:0: [sda] Write Protect is off
[ 2.637523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.637555] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.655633] sda: sda1
[ 2.656126] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.704037] usb 2-7: new low-speed USB device number 2 using ohci-pci
[ 2.925058] usb 2-7: New USB device found, idVendor=0461, idProduct=4d22
[ 2.925060] usb 2-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.925062] usb 2-7: Product: USB Optical Mouse
[ 2.929705] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.936308] usbcore: registered new interface driver usbhid
[ 2.936310] usbhid: USB HID core driver
[ 2.937294] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/0003:0461:4D22.0001/input/input3
[ 2.937418] hid-generic 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-7/input0
[ 3.108042] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.110337] ata2.00: ATA-7: ST3160828AS, 3.02, max UDMA/100
[ 3.110340] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.114831] ata2.00: configured for UDMA/100
[ 3.115149] scsi 1:0:0:0: Direct-Access ATA ST3160828AS 3.02 PQ: 0 ANSI: 5
[ 3.148240] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.148298] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.148301] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.148326] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.193180] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 3.194238] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.392033] usb 2-9: new low-speed USB device number 3 using ohci-pci
[ 3.463165] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.490384] random: fast init done
[ 3.621062] usb 2-9: New USB device found, idVendor=0461, idProduct=0010
[ 3.621065] usb 2-9: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.621066] usb 2-9: Product: USB Keyboard
[ 3.634581] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/0003:0461:0010.0002/input/input4
[ 3.692243] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:02.0-9/input0
[ 3.707116] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/0003:0461:0010.0003/input/input5
[ 3.764089] hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:02.0-9/input1
[ 3.774442] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.776124] scsi 6:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21L W516 PQ: 0 ANSI: 5
[ 3.777171] ata8: port disabled--ignoring
[ 3.794643] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.794646] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.794898] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 12.542091] scsi host8: ioc0: LSISAS1068E B1, FwRev=01103c00h, Ports=1, MaxQ=511, IRQ=28
[ 12.580662] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x500000e016cc0552
[ 12.583443] scsi 8:0:0:0: Direct-Access FUJITSU MAX3073RC HPF1 PQ: 0 ANSI: 5
[ 12.636912] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 8, phy 1, sas_addr 0x500000e016da28d2
[ 12.639786] sd 8:0:0:0: [sdc] 143374738 512-byte logical blocks: (73.4 GB/68.4 GiB)
[ 12.640123] scsi 8:0:1:0: Direct-Access FUJITSU MAX3073RC HPF1 PQ: 0 ANSI: 5
[ 12.642535] sd 8:0:0:0: [sdc] Write Protect is off
[ 12.642538] sd 8:0:0:0: [sdc] Mode Sense: cf 00 10 08
[ 12.643938] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 12.680014] sdc: sdc1
[ 12.703758] mptsas: ioc0: attaching raid volume, channel 1, id 1
[ 12.706749] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 12.864652] PM: Starting manual resume from disk
[ 12.864658] PM: Hibernation image partition 8:21 present
[ 12.864660] PM: Looking for hibernation image.
[ 12.864976] PM: Image not found (code -22)
[ 12.864977] PM: Hibernation image not present or could not be loaded.
[ 13.246113] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.752186] random: crng init done
[ 13.752189] random: 7 urandom warning(s) missed due to ratelimiting
[ 14.184447] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 14.482182] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.556627] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 14.556810] systemd[1]: Detected architecture x86-64.
[ 14.575611] systemd[1]: Set hostname to <alexdebian.tld>.
[ 17.138155] systemd[1]: Listening on Journal Socket.
[ 17.138250] systemd[1]: Reached target User and Group Name Lookups.
[ 17.138304] systemd[1]: Listening on Journal Socket (/dev/log).
[ 17.138329] systemd[1]: Reached target Remote File Systems.
[ 17.138600] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 17.138702] systemd[1]: Listening on Journal Audit Socket.
[ 17.138750] systemd[1]: Listening on Syslog Socket.
[ 17.546983] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 17.862797] systemd-journald[244]: Received request to flush runtime journal from PID 1
[ 18.422014] lp: driver loaded but no devices found
[ 18.559880] ppdev: user-space parallel port driver
[ 18.787985] [drm] Initialized
[ 19.330470] nvidia: loading out-of-tree module taints kernel.
[ 19.330480] nvidia: module license 'NVIDIA' taints kernel.
[ 19.330481] Disabling lock debugging due to kernel taint
[ 19.354618] ACPI: PCI Interrupt Link [LXB2] enabled at IRQ 41
[ 19.354673] vgaarb: device changed decodes: PCI:0001:58:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 19.355145] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0001:58:00.0 on minor 0
[ 19.355158] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.137 Thu Sep 14 13:51:03 PDT 2017
[ 20.189825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 20.189831] ACPI: Power Button [PBTN]
[ 20.189892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 20.189894] ACPI: Power Button [PWRF]
[ 20.236376] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 20.236498] nv_tco: Watchdog reboot detected
[ 20.236580] nv_tco: initialized (0xf940). heartbeat=30 sec (nowayout=0)
[ 20.238077] wmi: Mapper loaded
[ 20.259382] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.338148] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.338199] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 20.338240] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 20.338282] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 20.338321] scsi 8:0:1:0: Attached scsi generic sg4 type 0
[ 20.386926] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 20.387007] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[ 20.530206] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 20.544805] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 20.544816] snd_hda_intel 0000:00:06.1: Disabling MSI
[ 20.725636] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 21.012772] kvm: Nested Virtualization enabled
[ 21.046792] EDAC MC: Ver: 3.0.0
[ 21.055245] MCE: In-kernel MCE decoding enabled.
[ 21.064108] EDAC amd64: DRAM ECC enabled.
[ 21.064119] EDAC amd64: K8 revF or later detected (node 0).
[ 21.064134] EDAC MC: DCT0 chip selects:
[ 21.064135] EDAC amd64: MC: 0: 2048MB 1: 0MB
[ 21.064136] EDAC amd64: MC: 2: 2048MB 3: 0MB
[ 21.064137] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 21.064138] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.064297] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 21.064299] EDAC amd64: DRAM ECC enabled.
[ 21.064303] EDAC amd64: K8 revF or later detected (node 1).
[ 21.064315] EDAC MC: DCT0 chip selects:
[ 21.064316] EDAC amd64: MC: 0: 2048MB 1: 0MB
[ 21.064317] EDAC amd64: MC: 2: 2048MB 3: 0MB
[ 21.064318] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 21.064319] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 21.064466] EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT)
[ 21.064482] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 21.064483] AMD64 EDAC driver v3.4.0
[ 21.071970] powernow_k8: fid 0x12 (2600 MHz), vid 0x8
[ 21.071972] powernow_k8: fid 0x10 (2400 MHz), vid 0xa
[ 21.071973] powernow_k8: fid 0xe (2200 MHz), vid 0xc
[ 21.071974] powernow_k8: fid 0xc (2000 MHz), vid 0xe
[ 21.071975] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[ 21.071976] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 21.072127] powernow_k8: fid 0x12 (2600 MHz), vid 0x8
[ 21.072128] powernow_k8: fid 0x10 (2400 MHz), vid 0xa
[ 21.072129] powernow_k8: fid 0xe (2200 MHz), vid 0xc
[ 21.072130] powernow_k8: fid 0xc (2000 MHz), vid 0xe
[ 21.072131] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[ 21.072132] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 21.072162] powernow_k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 (4 cpu cores) (version 2.20.00)
[ 21.636096] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[ 21.796054] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[ 21.796062] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 21.796066] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 21.796070] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 21.796074] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 21.796076] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 21.796082] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 21.796086] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 21.796090] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 21.796093] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
[ 21.796097] snd_hda_codec_realtek hdaudioC0D0: Aux=0x14
[ 22.173028] Adding 8386556k swap on /dev/sdb5. Priority:-1 extents:1 across:8386556k FS
[ 22.960301] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 24.497148] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/sound/card0/input10
[ 24.497896] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input11
[ 24.498133] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input12
[ 24.498320] input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input13
[ 24.498508] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input14
[ 24.498709] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input15
[ 32.777267] IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready
[ 32.778224] forcedeth 0000:00:08.0 enp0s8: MSI enabled
[ 32.778489] forcedeth 0000:00:08.0 enp0s8: no link during initialization
[ 32.778807] IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready
[ 33.230930] forcedeth 0000:00:09.0 enp0s9: MSI enabled
[ 33.232170] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready
[ 33.232192] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s9: link becomes ready
[ 53.391867] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 56.591155] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 169.708047] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 169.857916] usb 1-3: New USB device found, idVendor=174c, idProduct=1153
[ 169.857921] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 169.857925] usb 1-3: Product: AS2115
[ 169.857929] usb 1-3: Manufacturer: ASMedia
[ 169.857932] usb 1-3: SerialNumber: 00000000000000000000
[ 169.947201] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 169.947692] scsi host9: usb-storage 1-3:1.0
[ 169.947949] usbcore: registered new interface driver usb-storage
[ 169.962992] usbcore: registered new interface driver uas
[ 170.978361] scsi 9:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
[ 170.979564] sd 9:0:0:0: Attached scsi generic sg5 type 0
[ 170.987153] sd 9:0:0:0: [sdd] Spinning up disk...
[ 172.000120] .
[ 172.001172] ready
[ 172.007670] sd 9:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 172.010154] sd 9:0:0:0: [sdd] Write Protect is off
[ 172.010161] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 172.012301] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 172.028466] sdd: sdd1
[ 172.035143] sd 9:0:0:0: [sdd] Attached SCSI disk
[ 174.219284] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.