Debian-facile

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Stretch : pas de carte réseau détectée.

Bonsoir à tous

Voici, sous Windows, le gestionnaire de périphériques de ma noubelle tour :



Je m'y attendais un peu.
Carte-mère : ASUS PRIME Z390M-PLUS

Je suis un peu dans cette situation-là :
https://www.debian-fr.org/t/installatio … le/78396/8
Pas de carte réseau détectée.

Si j'ai bien pigé, il me faut compiler, sur une autre bécane, le pilote de cette carte réseau ? Ou bien télécharger un paquet précis ?

Contenu du cdrom de la mobo :
isolinux:

data
mmemdisk
.
..
boot.ima
bootmsg.txt

src
.
..
isolinux.bin

boot.cat
misolinux.cfg
msyslinux.cfg

isolinux/data:
mmemdisk
.
..

boot.ima

bootmsg.txt

isolinux/src:
.
..
FDOEMCD.builder.zip
FDOEMCD.source-tools.zip
FDOEMCD.source.zip

Hum !


J'ajoute quelques captures :

Dernière modification par Lupa (27-08-2019 22:31:19)

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

Bonsoir

le noyau des backports de stretch risque de faire fonctionner cette carte réseau intel I219-V

=> https://packages.debian.org/source/stre … orts/linux

ici en bas de page tu dois avoir le .deb a installer avec "dpkg -i"    =>  https://packages.debian.org/stretch-bac … po.5-amd64

il te faudra activer les backports sur ton sources.list ensuite pour le maintenir a jour
tu le récupère avec une autre machine sur une clé usb et tu l'installe avec

dpkg -i lenomdupaquet.deb
 

un reboot et tu dois avoir le réseau

a l'installation tu n'a pas eu de problème de réseau ?
si justement debian n'est pas installé , tu a testé une image iso de buster ? et ça ne fonctionne pas .
ps: des fois je suis long a percuter ..........   

de plus j'ai une machine en Kabylake (carte mère Asus) qui tourne avec cette carte réseau , je me souvient plus comment j'ai installé stretch 
mais pour buster aucun souci , je te confirme ça fonctionne

Dernière modification par anonyme (27-08-2019 23:31:51)

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

la carte en question est une "PRIME Z270-A"

lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (Z270)
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1)
04:00.0 USB controller: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller
 

a priori j'ai réussi a l'époque a installer stretch   

un problème réseau mais après l'installation suite a la mise a jour du bios de la carte mère.
=>  https://debian-facile.org/viewtopic.php?id=16688

ps: de mémoire j'ai une carte réseau en USB (pour le PI3 et les PC récalcitrant    ) bien reconnu sous GNU Linux
de forte chance que ce soit ce qui m'a permit de lancer l'installation et ensuite de me dépanner lorsque la carte est tombé en panne .
maintenant ça tourne sous buster sans problème

Dernière modification par anonyme (27-08-2019 23:53:22)

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Bonjour

Ben justement : non, pas d'install possible. La carte réseau n'est pas détectée.

J'ai un peu de mal à comprendre.

Donc, je devrais pomper le driver quelque part, le compiler sur une autre bécane Debian, et le placer sur un deuxième périph USB ?
Sur mes bécanes :

root@1150:~# uname -a
Linux 1150 4.19.0-0.bpo.5-amd64 #1 SMP Debian 4.19.37-5+deb10u2~bpo9+1 (2019-08-16) x86_64 GNU/Linux
 

Donc :
- soit je trouve le driver et le compile
- soit je pompe les ISO DVD3 etc de Stretch, en espérant que, dedans, il y aura ce driver ?
- soit j'utilise un convertisseur (je l'ai) USB-Rj45

J'ai bien suivi ?
Je vais tenter ça, déjà : le convertisseur. Je donne le retour

12 H OO : ça marche avec le convertisseur. J'installe en EFI. Mais GParted live ne fonctionne pas. J'ai dû utiliser le CD de Malekal, contenant Wizard patition.

Dernière modification par Lupa (28-08-2019 11:02:59)

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

Bonjour
oui la carte réseau USB ça dépanne bien

le DVD1 , l' installateur s'occupe de tout , pourquoi tu parle de gparted ?

tu utilise le DVD1 de stretch ? (c'est marqué au démarrage si il démarre en EFI ).

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Le DVD1, j'en ai fait une ISO d'installation de Stretch.
Mais là, le matériel est très très récent.
Voici le lscpi :

00:00.0 Host bridge: Intel Corporation Device 3ec2 (rev 0d)
00:02.0 VGA compatible controller: Intel Corporation Device 3e98 (rev 02)
00:14.0 USB controller: Intel Corporation Device a36d (rev 10)
00:14.2 RAM memory: Intel Corporation Device a36f (rev 10)
00:16.0 Communication controller: Intel Corporation Device a360 (rev 10)
00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 10)
00:1b.0 PCI bridge: Intel Corporation Device a340 (rev f0)
00:1c.0 PCI bridge: Intel Corporation Device a338 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Device a330 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a305 (rev 10)
00:1f.3 Audio device: Intel Corporation Device a348 (rev 10)
00:1f.4 SMBus: Intel Corporation Device a323 (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device a324 (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Device 15bc (rev 10)

 

La cg non plus n'est pas gérée.
Là, je télécharge le paquet des backports que tu m'as suggéré plus haut : https://packages.debian.org/stretch-bac … po.5-amd64

Ca y est !!
La carte Ethernet fonctionne !
J'ai déconnecté le convertisseur, et ça marche. Bravo, Robert !

La cg : doit-elle faire l'objet d'un nouveau sujet ?

root@deb-1151:~# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Device 3e98 (rev 02)
 

Dernière modification par Lupa (28-08-2019 12:58:22)

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

fait ceci

update-pciids
 

il te faut maintenant un bon sources.list avec les backports , peut être installé le méta paquet linux-image-amd64 a partir des backports

vérifier les erreurs et si besoin installer les firmwares

journalctl -r -p err
 

buster est préférable a stretch pour cette machine (dernière génération intel ) , mais bon ça devrait fonctionner 

@++

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Mon sources.list :

# Mises à jour de sécurité
deb http://security.debian.org/ stretch/updates main contrib non-free
deb-src http://security.debian.org/ stretch/updates main contrib non-free

## Miroir Debian
# Dépôt de base
deb http://ftp.debian.org/debian stretch main contrib non-free
deb-src http://ftp.debian.org/debian stretch main contrib non-free

# Mises à jour pour stable
deb http://ftp.debian.org/debian stretch-updates main contrib non-free
deb-src http://ftp.debian.org/debian stretch-updates main contrib non-free

# Rétroportages vers stable
deb http://ftp.debian.org/debian stretch-backports main contrib non-free
deb-src http://ftp.debian.org/debian stretch-backports main contrib non-free

# -------- Pr WebMin ----------
deb http://download.webmin.com/download/repository sarge contrib

# --------- Pr Virtual Box ----
deb http://download.virtualbox.org/virtualbox/debian stretch contrib

# --------- Pr Multisystem ----
deb http://liveusb.info/multisystem/depot all main

 

update-pciids
Downloaded daily snapshot dated 2019-08-25 03:15:01

 

Commande :

journalctl -r -p err
-- Logs begin at Wed 2019-08-28 14:07:19 CEST, end at Wed 2019-08-28 14:36:39 CEST. --
août 28 14:08:20 deb-1151 kernel: hdaudio hdaudioC0D2: Unable to bind the codec
août 28 14:07:21 deb-1151 avahi-daemon[554]: chroot.c: open() failed: No such file or directory
août 28 14:07:19 deb-1151 kernel: kvm: disabled by bios
août 28 14:07:19 deb-1151 kernel: iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]

J'ai effectué la commande que tu m'as passée : apt -t stretch-backports install linux-image-amd64 linux-headers-amd64 firmware-misc-nonfree
Plusieurs fois.Je vais chercher ce meta-paquet.

Dernière modification par Lupa (28-08-2019 13:47:59)

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

tu n'arrive pas a installer les paquets ?  =>  https://packages.debian.org/fr/stretch- … mage-amd64

un update ?

apt update
 

pour le sources.list commente les "deb-src" comme ceci

# Mises à jour de sécurité
deb http://security.debian.org/ stretch/updates main contrib non-free
#deb-src http://security.debian.org/ stretch/updates main contrib non-free

## Miroir Debian
# Dépôt de base
deb http://ftp.debian.org/debian stretch main contrib non-free
#deb-src http://ftp.debian.org/debian stretch main contrib non-free

# Mises à jour pour stable
deb http://ftp.debian.org/debian stretch-updates main contrib non-free
#deb-src http://ftp.debian.org/debian stretch-updates main contrib non-free

# Rétroportages vers stable
deb http://ftp.debian.org/debian stretch-backports main contrib non-free
#deb-src http://ftp.debian.org/debian stretch-backports main contrib non-free

 

a priori tu n'a pas besoin de firmware selon le retour des erreurs , si tu a le noyau 4.19

uname -a
 

ps: si le noyau ne détecte pas le matériel , il ne va pas réclamer le firmware , bien vérifier que tu est sous le 4.19 des backports

pour le gpu intel installe ce paquet "mesa-utils"  et fait la commande glxinfo -B

apt-get install mesa-utils
 

puis teste avec

glxinfo -B
 

tu peu aussi regarder ceci

dmesg | grep drm
 

dmesg | grep intel
 

on peu aussi regarder le log de X  (ça dépend de ton bureau et si tu est ou pas sous wayland )

cat /var/log/Xorg.0.log
 

sous gnome

cat /home/tonuser/.local/share/xorg/Xorg.0.log
 

Dernière modification par anonyme (28-08-2019 14:25:00)

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Je suis en XFCE.
Modifié le sources.list ;

root@deb-1151:~# dmesg | grep intel
 

root@deb-1151:~# dmesg | grep drm
Rien.


 

root@deb-1151:~# uname -a
Linux deb-1151 4.19.0-0.bpo.5-amd64 #1 SMP Debian 4.19.37-5+deb10u2~bpo9+1 (2019-08-16) x86_64 GNU/Linux

 

Commande
glxinfo -B

[    0.763718] intel_idle: MWAIT substates: 0x11142120
[    0.763718] intel_idle: v0.4.1 model 0x9E
[    0.763897] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.787091] intel_pstate: Intel P-state driver initializing
[    0.787442] intel_pstate: HWP enabled
[    2.197313] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.223671] intel_rapl: Found RAPL domain package
[    2.223672] intel_rapl: Found RAPL domain core
[    2.223673] intel_rapl: Found RAPL domain uncore
[    2.223673] intel_rapl: Found RAPL domain dram
[   62.432447] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
root@deb-1151:~#

uname -a :

root@deb-1151:~# uname -a
Linux deb-1151 4.19.0-0.bpo.5-amd64 #1 SMP Debian 4.19.37-5+deb10u2~bpo9+1 (2019-08-16) x86_64 GNU/Linux
 

mesa-utils : déjà installé.

Commande
glxinfo -B

name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: VMware, Inc. (0xffffffff)
    Device: llvmpipe (LLVM 3.9, 256 bits) (0xffffffff)
    Version: 13.0.6
    Accelerated: no
    Video memory: 15892MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.0
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.9, 256 bits)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 13.0.6
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 13.0.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.0 Mesa 13.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00

 

Les logs de Xorg sont énormes. Dois-je les mettre en ligne ?
Merci pour ton coup de main

Dernière modification par Lupa (28-08-2019 14:37:44)

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

tu a un peu mélangé les retours mais bon j'ai retrouvé les infos
ton gpu est mal reconnu

Device: llvmpipe (LLVM 3.9, 256 bits) (0xffffffff)
    Version: 13.0.6
    Accelerated: no
 

avec le bureau xfce , c'est celle ci

cat /var/log/Xorg.0.log
 

tu le poste avec les "balise code"
une migration vers buster serait plus simple 

la commande a fonctionné ?

apt-get -t stretch-backports install linux-image-amd64 linux-headers-amd64 firmware-misc-nonfree
 

j'ai pas compris ce que tu a fais exactement a la fin du #8

pour les drm (le grep) je suis un peu étonné , au moins confirmé que le init du gpu est correct
un exemple pour une carte nvidia + driver propriétaire

dmesg | grep drm
[    3.546636] [drm] [nvidia-drm] [GPU ID 0x00000800] Loading driver
[    3.546638] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:08:00.0 on minor 0
 

la dernière ligne confirme que tout correct même si on a pas le détail

le log de X nous en dira plus .

ps: si tu regarde ici en #3 => https://debian-facile.org/viewtopic.php?id=25034
le retour de "dmesg | grep drm" est plus sympatique 

[    2.540234] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
 

si tu connais le cpu installé ou avec la commande lscpu

lscpu
 

Dernière modification par anonyme (28-08-2019 15:41:07)

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Je reprends. Désolé : j'étais allé chercher les courses. Plus rien à manger
Oui : la commande

apt-get -t stretch-backports install linux-image-amd64 linux-headers-amd64 firmware-misc-nonfree
 

a fonctionné.

Je pense aussi que Buster serait plus maniable là-dessus.
Je n'aime pas du tout ma démarche : reculer devant une difficulté... Hum.... Mais là, il y a peut-être bel et bien une incompatibilité de l'OS avec le hard.
Je télécharge une ISO rc2. Pas le netinst : une grosse ISO, comme j'en ai l'habitude pour Stretch.

Commande lscpu

Architecture :        x86_64
Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit
Boutisme :            Little Endian
Processeur(s) :       6
Liste de processeur(s) en ligne : 0-5
Thread(s) par cœur : 1
Cœur(s) par socket : 6
Socket(s) :           1
Nœud(s) NUMA :       1
Identifiant constructeur : GenuineIntel
Famille de processeur : 6
Modèle :             158
Nom de modèle :      Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz
Révision :           13
Vitesse du processeur en MHz : 3725.771
Vitesse maximale du processeur en MHz : 4600,0000
Vitesse minimale du processeur en MHz : 800,0000
BogoMIPS :            7392.00
Virtualisation :      VT-x
Cache L1d :           32K
Cache L1i :           32K
Cache L2 :            256K
Cache L3 :            9216K
Nœud NUMA 0 de processeur(s) : 0-5
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d arch_capabilities

 

Les logs :

Xorg.0.log

[     3.937]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[     3.937] X Protocol Version 11, Revision 0
[     3.937] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[     3.937] Current Operating System: Linux deb-1151 4.19.0-0.bpo.5-amd64 #1 SMP Debian 4.19.37-5+deb10u2~bpo9+1 (2019-08-16) x86_64
[     3.937] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-0.bpo.5-amd64 root=UUID=892a92e2-10cc-47b0-8042-a05ef67038b8 ro quiet
[     3.937] Build Date: 03 November 2018  03:09:11AM
[     3.937] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[     3.937] Current version of pixman: 0.34.0
[     3.937]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     3.937] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.937] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 28 18:00:58 2019
[     3.938] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.938] (==) No Layout section.  Using the first Screen section.
[     3.938] (==) No screen section available. Using defaults.
[     3.938] (**) |-->Screen "Default Screen Section" (0)
[     3.938] (**) |   |-->Monitor "<default monitor>"
[     3.939] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     3.939] (==) Automatically adding devices
[     3.939] (==) Automatically enabling devices
[     3.939] (==) Automatically adding GPU devices
[     3.939] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.941] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.941]  Entry deleted from font path.
[     3.942] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     3.942] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.942] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.942] (II) Loader magic: 0x5631c19d5e00
[     3.942] (II) Module ABI versions:
[     3.942]  X.Org ANSI C Emulation: 0.4
[     3.942]  X.Org Video Driver: 23.0
[     3.942]  X.Org XInput driver : 24.1
[     3.942]  X.Org Server Extension : 10.0
[     3.943] (++) using VT number 7

[     3.943] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.944] (--) PCI:*(0:0:2:0) 8086:3e98:1043:8694 rev 2, Mem @ 0xa0000000/16777216, 0x90000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[     3.944] (II) LoadModule: "glx"
[     3.944] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.953] (II) Module glx: vendor="X.Org Foundation"
[     3.953]  compiled for 1.19.2, module version = 1.0.0
[     3.953]  ABI class: X.Org Server Extension, version 10.0
[     3.953] (==) Matched modesetting as autoconfigured driver 0
[     3.953] (==) Matched fbdev as autoconfigured driver 1
[     3.953] (==) Matched vesa as autoconfigured driver 2
[     3.953] (==) Assigned the driver to the xf86ConfigLayout
[     3.953] (II) LoadModule: "modesetting"
[     3.953] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.954] (II) Module modesetting: vendor="X.Org Foundation"
[     3.954]  compiled for 1.19.2, module version = 1.19.2
[     3.954]  Module class: X.Org Video Driver
[     3.954]  ABI class: X.Org Video Driver, version 23.0
[     3.954] (II) LoadModule: "fbdev"
[     3.954] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.954] (II) Module fbdev: vendor="X.Org Foundation"
[     3.954]  compiled for 1.19.0, module version = 0.4.4
[     3.954]  Module class: X.Org Video Driver
[     3.954]  ABI class: X.Org Video Driver, version 23.0
[     3.954] (II) LoadModule: "vesa"
[     3.954] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.955] (II) Module vesa: vendor="X.Org Foundation"
[     3.955]  compiled for 1.19.0, module version = 2.3.4
[     3.955]  Module class: X.Org Video Driver
[     3.955]  ABI class: X.Org Video Driver, version 23.0
[     3.955] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.955] (II) FBDEV: driver for framebuffer: fbdev
[     3.955] (II) VESA: driver for VESA chipsets: vesa
[     3.957] (EE) open /dev/dri/card0: No such file or directory
[     3.957] (WW) Falling back to old probe method for modesetting
[     3.957] (EE) open /dev/dri/card0: No such file or directory
[     3.957] (II) Loading sub module "fbdevhw"
[     3.957] (II) LoadModule: "fbdevhw"
[     3.957] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.958] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.958]  compiled for 1.19.2, module version = 0.0.2
[     3.958]  ABI class: X.Org Video Driver, version 23.0
[     3.958] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[     3.958] (II) FBDEV(1): using default device
[     3.958] (WW) Falling back to old probe method for vesa
[     3.958] (EE) Screen 0 deleted because of no matching config section.
[     3.958] (II) UnloadModule: "modesetting"
[     3.958] (II) FBDEV(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     3.958] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     3.958] (==) FBDEV(0): RGB weight 888
[     3.958] (==) FBDEV(0): Default visual is TrueColor
[     3.958] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.958] (II) FBDEV(0): hardware: EFI VGA (video memory: 3072kB)
[     3.958] (II) FBDEV(0): checking modes against framebuffer device...
[     3.958] (II) FBDEV(0): checking modes against monitor...
[     3.958] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[     3.958] (**) FBDEV(0):  Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[     3.958] (II) FBDEV(0): Modeline "current"x0.0   78.65  1024 1056 1184 1312  768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[     3.958] (==) FBDEV(0): DPI set to (96, 96)
[     3.958] (II) Loading sub module "fb"
[     3.958] (II) LoadModule: "fb"
[     3.958] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.959] (II) Module fb: vendor="X.Org Foundation"
[     3.959]  compiled for 1.19.2, module version = 1.0.0
[     3.959]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.959] (**) FBDEV(0): using shadow framebuffer
[     3.959] (II) Loading sub module "shadow"
[     3.959] (II) LoadModule: "shadow"
[     3.959] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     3.959] (II) Module shadow: vendor="X.Org Foundation"
[     3.960]  compiled for 1.19.2, module version = 1.1.0
[     3.960]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.960] (II) UnloadModule: "vesa"
[     3.960] (II) Unloading vesa
[     3.960] (==) Depth 24 pixmap format is 32 bpp
[     3.960] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[     3.961] (==) FBDEV(0): Backing store enabled
[     3.962] (==) FBDEV(0): DPMS enabled
[     3.962] (==) RandR enabled
[     3.966] (II) SELinux: Disabled on system
[     3.966] (II) AIGLX: Screen 0 is not DRI2 capable
[     3.966] (EE) AIGLX: reverting to software rendering
[     4.097] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[     4.098] (II) IGLX: Loaded and initialized swrast
[     4.098] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     4.167] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.167] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.167] (II) LoadModule: "libinput"
[     4.167] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.171] (II) Module libinput: vendor="X.Org Foundation"
[     4.171]  compiled for 1.19.0, module version = 0.23.0
[     4.171]  Module class: X.Org XInput Driver
[     4.171]  ABI class: X.Org XInput driver, version 24.1
[     4.171] (II) Using input driver 'libinput' for 'Power Button'
[     4.171] (**) Power Button: always reports core events
[     4.171] (**) Option "Device" "/dev/input/event2"
[     4.171] (**) Option "_source" "server/udev"
[     4.172] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.172] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     4.184] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     4.184] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.184] (**) Option "xkb_model" "pc105"
[     4.184] (**) Option "xkb_layout" "fr"
[     4.184] (**) Option "xkb_variant" "latin9"
[     4.208] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.209] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     4.209] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     4.209] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.209] (II) Using input driver 'libinput' for 'Power Button'
[     4.209] (**) Power Button: always reports core events
[     4.209] (**) Option "Device" "/dev/input/event1"
[     4.209] (**) Option "_source" "server/udev"
[     4.209] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     4.209] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     4.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     4.240] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     4.240] (**) Option "xkb_model" "pc105"
[     4.240] (**) Option "xkb_layout" "fr"
[     4.240] (**) Option "xkb_variant" "latin9"
[     4.241] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     4.241] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     4.242] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     4.242] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.242] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.242] (**) Sleep Button: always reports core events
[     4.242] (**) Option "Device" "/dev/input/event0"
[     4.242] (**) Option "_source" "server/udev"
[     4.242] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[     4.242] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[     4.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     4.260] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     4.260] (**) Option "xkb_model" "pc105"
[     4.260] (**) Option "xkb_layout" "fr"
[     4.260] (**) Option "xkb_variant" "latin9"
[     4.261] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[     4.261] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[     4.262] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[     4.262] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[     4.262] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[     4.262] (**) Logitech USB Optical Mouse: always reports core events
[     4.262] (**) Option "Device" "/dev/input/event5"
[     4.262] (**) Option "_source" "server/udev"
[     4.263] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is tagged by udev as: Mouse
[     4.263] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is a pointer caps
[     4.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C077.0001/input/input5/event5"
[     4.300] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[     4.300] (**) Option "AccelerationScheme" "none"
[     4.300] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[     4.300] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[     4.300] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[     4.301] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is tagged by udev as: Mouse
[     4.301] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is a pointer caps
[     4.302] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[     4.302] (II) No input driver specified, ignoring this device.
[     4.302] (II) This device may have been added with another device file.
[     4.304] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event6)
[     4.304] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.304] (II) Using input driver 'libinput' for 'CHICONY HP Basic USB Keyboard'
[     4.304] (**) CHICONY HP Basic USB Keyboard: always reports core events
[     4.304] (**) Option "Device" "/dev/input/event6"
[     4.304] (**) Option "_source" "server/udev"
[     4.305] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is tagged by udev as: Keyboard
[     4.305] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is a keyboard
[     4.352] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:03F0:0024.0002/input/input6/event6"
[     4.352] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 10)
[     4.352] (**) Option "xkb_model" "pc105"
[     4.352] (**) Option "xkb_layout" "fr"
[     4.352] (**) Option "xkb_variant" "latin9"
[     4.353] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is tagged by udev as: Keyboard
[     4.353] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is a keyboard
[     4.354] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[     4.354] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.354] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     4.354] (**) Eee PC WMI hotkeys: always reports core events
[     4.354] (**) Option "Device" "/dev/input/event4"
[     4.354] (**) Option "_source" "server/udev"
[     4.355] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     4.355] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[     4.368] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[     4.368] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[     4.368] (**) Option "xkb_model" "pc105"
[     4.368] (**) Option "xkb_layout" "fr"
[     4.368] (**) Option "xkb_variant" "latin9"
[     4.369] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     4.369] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[     4.370] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[     4.370] (II) No input driver specified, ignoring this device.
[     4.370] (II) This device may have been added with another device file.
[    62.704] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[    62.704] (II) No input driver specified, ignoring this device.
[    62.704] (II) This device may have been added with another device file.
[    62.720] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[    62.720] (II) No input driver specified, ignoring this device.
[    62.720] (II) This device may have been added with another device file.
[    62.720] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[    62.720] (II) No input driver specified, ignoring this device.
[    62.720] (II) This device may have been added with another device file.
[    62.720] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    62.720] (II) No input driver specified, ignoring this device.
[    62.720] (II) This device may have been added with another device file.
[    62.720] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[    62.720] (II) No input driver specified, ignoring this device.
[    62.720] (II) This device may have been added with another device file.

 

Xorg.1.log :

[    19.441]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    19.441] X Protocol Version 11, Revision 0
[    19.441] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[    19.441] Current Operating System: Linux deb-1151 4.19.0-0.bpo.5-amd64 #1 SMP Debian 4.19.37-5+deb10u2~bpo9+1 (2019-08-16) x86_64
[    19.441] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-0.bpo.5-amd64 root=UUID=892a92e2-10cc-47b0-8042-a05ef67038b8 ro quiet
[    19.441] Build Date: 03 November 2018  03:09:11AM
[    19.441] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[    19.441] Current version of pixman: 0.34.0
[    19.441]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    19.441] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.441] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Aug 28 15:41:16 2019
[    19.441] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.441] (==) No Layout section.  Using the first Screen section.
[    19.441] (==) No screen section available. Using defaults.
[    19.441] (**) |-->Screen "Default Screen Section" (0)
[    19.441] (**) |   |-->Monitor "<default monitor>"
[    19.441] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    19.441] (==) Automatically adding devices
[    19.441] (==) Automatically enabling devices
[    19.441] (==) Automatically adding GPU devices
[    19.441] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    19.441] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.441]  Entry deleted from font path.
[    19.441] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    19.441] (==) ModulePath set to "/usr/lib/xorg/modules"
[    19.441] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.441] (II) Loader magic: 0x55d03f1bde00
[    19.441] (II) Module ABI versions:
[    19.441]  X.Org ANSI C Emulation: 0.4
[    19.441]  X.Org Video Driver: 23.0
[    19.441]  X.Org XInput driver : 24.1
[    19.441]  X.Org Server Extension : 10.0
[    19.442] (--) using VT number 2

[    19.442] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    19.442] (--) PCI:*(0:0:2:0) 8086:3e98:1043:8694 rev 2, Mem @ 0xa0000000/16777216, 0x90000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[    19.442] (II) LoadModule: "glx"
[    19.442] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.443] (II) Module glx: vendor="X.Org Foundation"
[    19.443]  compiled for 1.19.2, module version = 1.0.0
[    19.443]  ABI class: X.Org Server Extension, version 10.0
[    19.443] (==) Matched modesetting as autoconfigured driver 0
[    19.443] (==) Matched fbdev as autoconfigured driver 1
[    19.443] (==) Matched vesa as autoconfigured driver 2
[    19.443] (==) Assigned the driver to the xf86ConfigLayout
[    19.443] (II) LoadModule: "modesetting"
[    19.443] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    19.443] (II) Module modesetting: vendor="X.Org Foundation"
[    19.443]  compiled for 1.19.2, module version = 1.19.2
[    19.443]  Module class: X.Org Video Driver
[    19.443]  ABI class: X.Org Video Driver, version 23.0
[    19.443] (II) LoadModule: "fbdev"
[    19.443] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    19.443] (II) Module fbdev: vendor="X.Org Foundation"
[    19.443]  compiled for 1.19.0, module version = 0.4.4
[    19.443]  Module class: X.Org Video Driver
[    19.443]  ABI class: X.Org Video Driver, version 23.0
[    19.443] (II) LoadModule: "vesa"
[    19.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    19.443] (II) Module vesa: vendor="X.Org Foundation"
[    19.443]  compiled for 1.19.0, module version = 2.3.4
[    19.443]  Module class: X.Org Video Driver
[    19.443]  ABI class: X.Org Video Driver, version 23.0
[    19.443] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    19.443] (II) FBDEV: driver for framebuffer: fbdev
[    19.443] (II) VESA: driver for VESA chipsets: vesa
[    19.596] (EE) open /dev/dri/card0: No such file or directory
[    19.596] (WW) Falling back to old probe method for modesetting
[    19.597] (EE) open /dev/dri/card0: No such file or directory
[    19.597] (II) Loading sub module "fbdevhw"
[    19.597] (II) LoadModule: "fbdevhw"
[    19.597] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    19.597] (II) Module fbdevhw: vendor="X.Org Foundation"
[    19.597]  compiled for 1.19.2, module version = 0.0.2
[    19.597]  ABI class: X.Org Video Driver, version 23.0
[    19.597] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[    19.597] (II) FBDEV(1): using default device
[    19.597] (WW) Falling back to old probe method for vesa
[    19.597] (EE) Screen 0 deleted because of no matching config section.
[    19.597] (II) UnloadModule: "modesetting"
[    19.597] (II) FBDEV(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    19.597] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    19.597] (==) FBDEV(0): RGB weight 888
[    19.597] (==) FBDEV(0): Default visual is TrueColor
[    19.597] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    19.597] (II) FBDEV(0): hardware: EFI VGA (video memory: 3072kB)
[    19.597] (II) FBDEV(0): checking modes against framebuffer device...
[    19.597] (II) FBDEV(0): checking modes against monitor...
[    19.597] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[    19.597] (**) FBDEV(0):  Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[    19.597] (II) FBDEV(0): Modeline "current"x0.0   78.65  1024 1056 1184 1312  768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[    19.597] (==) FBDEV(0): DPI set to (96, 96)
[    19.597] (II) Loading sub module "fb"
[    19.597] (II) LoadModule: "fb"
[    19.597] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.597] (II) Module fb: vendor="X.Org Foundation"
[    19.597]  compiled for 1.19.2, module version = 1.0.0
[    19.597]  ABI class: X.Org ANSI C Emulation, version 0.4
[    19.597] (**) FBDEV(0): using shadow framebuffer
[    19.597] (II) Loading sub module "shadow"
[    19.597] (II) LoadModule: "shadow"
[    19.597] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    19.598] (II) Module shadow: vendor="X.Org Foundation"
[    19.598]  compiled for 1.19.2, module version = 1.1.0
[    19.598]  ABI class: X.Org ANSI C Emulation, version 0.4
[    19.598] (II) UnloadModule: "vesa"
[    19.598] (II) Unloading vesa
[    19.598] (==) Depth 24 pixmap format is 32 bpp
[    19.598] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[    19.598] (==) FBDEV(0): Backing store enabled
[    19.598] (==) FBDEV(0): DPMS enabled
[    19.598] (==) RandR enabled
[    19.599] (II) SELinux: Disabled on system
[    19.599] (II) AIGLX: Screen 0 is not DRI2 capable
[    19.599] (EE) AIGLX: reverting to software rendering
[    19.610] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    19.610] (II) IGLX: Loaded and initialized swrast
[    19.610] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    19.626] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    19.626] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    19.626] (II) LoadModule: "libinput"
[    19.626] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    19.627] (II) Module libinput: vendor="X.Org Foundation"
[    19.627]  compiled for 1.19.0, module version = 0.23.0
[    19.627]  Module class: X.Org XInput Driver
[    19.627]  ABI class: X.Org XInput driver, version 24.1
[    19.627] (II) Using input driver 'libinput' for 'Power Button'
[    19.627] (**) Power Button: always reports core events
[    19.627] (**) Option "Device" "/dev/input/event2"
[    19.627] (**) Option "_source" "server/udev"
[    19.627] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    19.627] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    19.644] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    19.644] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.644] (**) Option "xkb_model" "pc105"
[    19.644] (**) Option "xkb_layout" "fr"
[    19.644] (**) Option "xkb_variant" "latin9"
[    19.654] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    19.654] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    19.654] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    19.654] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    19.654] (II) Using input driver 'libinput' for 'Power Button'
[    19.654] (**) Power Button: always reports core events
[    19.654] (**) Option "Device" "/dev/input/event1"
[    19.654] (**) Option "_source" "server/udev"
[    19.655] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[    19.655] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[    19.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    19.668] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    19.668] (**) Option "xkb_model" "pc105"
[    19.668] (**) Option "xkb_layout" "fr"
[    19.668] (**) Option "xkb_variant" "latin9"
[    19.668] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[    19.668] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[    19.668] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    19.668] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    19.668] (II) Using input driver 'libinput' for 'Sleep Button'
[    19.668] (**) Sleep Button: always reports core events
[    19.669] (**) Option "Device" "/dev/input/event0"
[    19.669] (**) Option "_source" "server/udev"
[    19.669] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[    19.669] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[    19.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    19.688] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    19.688] (**) Option "xkb_model" "pc105"
[    19.688] (**) Option "xkb_layout" "fr"
[    19.688] (**) Option "xkb_variant" "latin9"
[    19.689] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[    19.689] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[    19.690] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[    19.690] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    19.690] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[    19.690] (**) Logitech USB Optical Mouse: always reports core events
[    19.690] (**) Option "Device" "/dev/input/event5"
[    19.690] (**) Option "_source" "server/udev"
[    19.690] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is tagged by udev as: Mouse
[    19.690] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is a pointer caps
[    19.720] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C077.0001/input/input5/event5"
[    19.720] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[    19.720] (**) Option "AccelerationScheme" "none"
[    19.720] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[    19.720] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    19.720] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    19.721] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is tagged by udev as: Mouse
[    19.721] (II) input device 'Logitech USB Optical Mouse', /dev/input/event5 is a pointer caps
[    19.722] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    19.722] (II) No input driver specified, ignoring this device.
[    19.722] (II) This device may have been added with another device file.
[    19.724] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event6)
[    19.724] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    19.724] (II) Using input driver 'libinput' for 'CHICONY HP Basic USB Keyboard'
[    19.724] (**) CHICONY HP Basic USB Keyboard: always reports core events
[    19.724] (**) Option "Device" "/dev/input/event6"
[    19.724] (**) Option "_source" "server/udev"
[    19.725] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is tagged by udev as: Keyboard
[    19.725] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is a keyboard
[    19.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:03F0:0024.0002/input/input6/event6"
[    19.768] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 10)
[    19.768] (**) Option "xkb_model" "pc105"
[    19.768] (**) Option "xkb_layout" "fr"
[    19.768] (**) Option "xkb_variant" "latin9"
[    19.769] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is tagged by udev as: Keyboard
[    19.769] (II) input device 'CHICONY HP Basic USB Keyboard', /dev/input/event6 is a keyboard
[    19.770] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[    19.770] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    19.770] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    19.770] (**) Eee PC WMI hotkeys: always reports core events
[    19.770] (**) Option "Device" "/dev/input/event4"
[    19.770] (**) Option "_source" "server/udev"
[    19.771] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[    19.771] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[    19.784] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[    19.784] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[    19.784] (**) Option "xkb_model" "pc105"
[    19.784] (**) Option "xkb_layout" "fr"
[    19.784] (**) Option "xkb_variant" "latin9"
[    19.785] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[    19.785] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[    19.786] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    19.786] (II) No input driver specified, ignoring this device.
[    19.786] (II) This device may have been added with another device file.
[    20.102] (II) UnloadModule: "libinput"
[    20.102] (II) UnloadModule: "libinput"
[    20.102] (II) UnloadModule: "libinput"
[    20.102] (II) UnloadModule: "libinput"
[    20.102] (II) UnloadModule: "libinput"
[    20.102] (II) UnloadModule: "libinput"
[    20.106] (II) Server terminated successfully (0). Closing log file.

 

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

Bonjour

de plus dans buster =>  https://tracker.debian.org/pkg/linux
dans les backports de buster tu a le noyau 4.2.9 disponible
sur du matériel aussi récent il vaut mieux utiliser la stable (que la old-stable )

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Ben c'est dur !
Je n'arrive pas à l'installer en EFI. Mon BIOS ne passera pas en legacy.
J'ai même le dernier boot live de GParted : il ne se lance pas totalement : je n'arrive pas à l'interface graphique ni en mode texte, sans doute à cause de la carte vidéo.

J'ai suivi ces tutos :
https://www.youtube.com/watch?v=LTQAT4Lcex8
Il fonctionnait très bien pour Stretch. Pas pour Buster.

Celui-ci :
https://www.youtube.com/watch?v=LlLgrasQiZE
Ca foire.
Buster se lance... et puis écran noir avec message " [ 64.414604] hdaudio hdaudioC0D2: Unable to bind the codec

J'ai y passé la journée, hier.
Y a-t-iil un tuto, fiable, quelque part ?
J'ai une préférence pour un partitionnement graphique.

Je vais retenter le tuto de Stretch. On verra.

Il me faut :
1 partition EFI, bootable
1 parttion swap
1 partition /home. Je peux la séparer, comme d'habitude, sur le deuxième disque. Le SSD est le disque système.

Précision : dans le BIOS, celui-ci me voir deux Debian. 500 Go sur le SSD. Deux fois...
MAIS le BIOS ,ne le voit pas en EFI, contrairement au support USB que j'ai utilisé pour installer.

Dernière modification par Lupa (30-08-2019 11:26:50)

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Up

Dois-je revenir à Stretch ?
Je suis dans le bleau, là...

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

Bonjour
le dvd1 de buster il prend en charge L' EFI et même le secure-key de microsoft , je vois pas le problème .
sinon un dist-upgrade de stretch vers buster , si tu a gardé l'installation
des disques différents ou tu a tout sur un seul disque , windows et debian ?

=>  https://cdimage.debian.org/debian-cd/cu … jigdo-dvd/

=> https://www.debian.org/CD/

ça passe mieux en installation normale plutôt que graphique , surtout si tu a un souci de gpu a l'installation.
sans le /home séparé cela donne ceci en EFI

fdisk -l
 

retour

Disque /dev/sda : 232,9 GiB, 250059350016 octets, 488397168 secteurs
Modèle de disque : Crucial_CT250MX2
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 9AA1D082-97DE-4628-BF9C-46585C0DDB08

Périphérique     Début       Fin  Secteurs Taille Type
/dev/sda1         2048   1050623   1048576   512M Système EFI
/dev/sda2      1050624 421543935 420493312 200,5G Système de fichiers Linux
/dev/sda3    421543936 488396799  66852864  31,9G Partition d'échange Linux
 

Dernière modification par anonyme (30-08-2019 14:10:36)

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

GAGNE !!
Provisoirement... Reste les sons, et patati-patta...
J'ai réussi à passer le BIOS en Legacy... et Buster s'est parfaitement installé.
Je n'avais pas eu ton message avant de faire ça.
Il y a deux disques :
SSD : / et /swap
1 To : /home.
Plus deux partitions : l'une pour les sauvegardes de root, l'autre pour les sauvegardes des autres.
J'ai tenté le coup avec le DVD 2. Peut-être le DVD1 aurait mieux fait l'affaire ? Possible. Il a marché sur l'une de mes autres bécanes Linux lorsqu'il en était encore au DVD1. Mais BIOS, pas EFI.

J'apprendrai ça plus tard : Stretch ne m'avait posé aucun problème pour l'installer plusieurs fois en EFI.

Je vois, ci-dessus :
Périphérique     Début       Fin  Secteurs Taille Type
/dev/sda1         2048   1050623   1048576   512M Système EFI : j'avais mis 500
/dev/sda2      1050624 421543935 420493312 200,5G Système de fichiers Linux
/dev/sda3    421543936 488396799  66852864  31,9G Partition d'échange Linux : j'avais réservé un peu moins de 10 Go.

Ca pourrait venir de là ?

Là, je suis un peu fatigué du cerveau ...
Demain, je m'attaque aux sons.
J'ai déjà fait une image CloneZilla du SSD avant de tripatouiller

A+ :hello:

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

Bonsoir
j'ai récupéré avec jigdo le DVD1 de buster aujourd'hui , il faudra que je le teste
pour l'audio

Audio
Realtek® ALC887 8-Channel High Definition Audio CODEC
- Supports : Jack-detection, Front Panel Jack-retasking
 

=> https://www.asus.com/fr/Motherboards/PR … fications/

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Bonjour

Merci pour le lien vers la fiche technique de la mobo.
Pour le lien sur les noyaux des backports : j'ai du mal à voir celui à télécharger. Il y en a beaucoup.


Et juste un léger détail : c'est uniquement en user que l'on peut créer des lanceurs sur le bureau.
Sous Stretch, je n'en n'ai qu'un : WebMin.desktop , plus un lien symbolique vers le password  de WebMin.
On doit pouvoir arranger ça ?
Je cherche. Je me suis fait un script pour appeler WebMin, mais le lien symbolique va me manquer.

P.S.: ça y est. Je l'ai trouvé hier . Merci

Dernière modification par Lupa (03-09-2019 09:55:18)

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Bonsoir
Après un coup foireux de mon dd 1 To, à côté du SSD, je réinstalle (troisième fois).
Le coup foireux : https://debian-facile.org/viewtopic.php?id=25116

Encore quelques petits détails de firmwares. J'en parlerai demain. Là, rude journée...
A +

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Bonjour à tous

C'est très étrange : je ne le "sens" pas.
Stretch, sur un socket 1150, est nettement plus réactif. Alors que Buster l'est moins, et surtout se comporte bizarrement. Il est lourd, et presque lent.
Il est possible que je gère mal le hardware.

lspci :

00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 0d)
00:02.0 VGA compatible controller: Intel Corporation Device 3e98 (rev 02)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 10)
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port (rev f0)
00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port (rev f0)
00:1f.0 ISA bridge: Intel Corporation Z390 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
 

lspci du 1150 sous Stretch :

00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)

 

Cet ancien 1150 serait-il plus rapide, ou bien j'ai un vrai problème ?
Comment savoir ?

dmesg :

[    0.000000] Linux version 5.2.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.2.9-2~bpo10+1 (2019-08-25)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-0.bpo.2-amd64 root=UUID=67add0dd-4cda-4b0f-993c-a77b5474fda1 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000886cffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000886d0000-0x0000000089f12fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000089f13000-0x000000008a0edfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008a0ee000-0x000000008a523fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008a524000-0x000000008ad0efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ad0f000-0x000000008ad0ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ad10000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.2.1 present.
[    0.000000] DMI: System manufacturer System Product Name/PRIME Z390M-PLUS, BIOS 2417 06/03/2019
[    0.000000] tsc: Detected 3700.000 MHz processor
[    0.002026] tsc: Detected 3696.000 MHz TSC
[    0.002026] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002027] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002030] last_pfn = 0x46e000 max_arch_pfn = 0x400000000
[    0.002032] MTRR default type: write-back
[    0.002033] MTRR fixed ranges enabled:
[    0.002033]   00000-9FFFF write-back
[    0.002034]   A0000-BFFFF uncachable
[    0.002034]   C0000-DBFFF write-protect
[    0.002035]   DC000-DFFFF uncachable
[    0.002035]   E0000-FFFFF write-protect
[    0.002036] MTRR variable ranges enabled:
[    0.002037]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.002037]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.002038]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.002038]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.002039]   4 base 008B800000 mask 7FFF800000 uncachable
[    0.002039]   5 base 2000000000 mask 6000000000 uncachable
[    0.002040]   6 base 1000000000 mask 7000000000 uncachable
[    0.002040]   7 base 0800000000 mask 7800000000 uncachable
[    0.002041]   8 base 4000000000 mask 4000000000 uncachable
[    0.002041]   9 disabled
[    0.003012] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003111] last_pfn = 0x8ad10 max_arch_pfn = 0x400000000
[    0.008498] found SMP MP-table at [mem 0x000fcce0-0x000fccef]
[    0.008698] Using GB pages for direct mapping
[    0.008700] BRK [0x3cd001000, 0x3cd001fff] PGTABLE
[    0.008701] BRK [0x3cd002000, 0x3cd002fff] PGTABLE
[    0.008701] BRK [0x3cd003000, 0x3cd003fff] PGTABLE
[    0.008731] BRK [0x3cd004000, 0x3cd004fff] PGTABLE
[    0.008732] BRK [0x3cd005000, 0x3cd005fff] PGTABLE
[    0.008882] BRK [0x3cd006000, 0x3cd006fff] PGTABLE
[    0.008920] BRK [0x3cd007000, 0x3cd007fff] PGTABLE
[    0.008970] BRK [0x3cd008000, 0x3cd008fff] PGTABLE
[    0.009036] RAMDISK: [mem 0x33635000-0x35b11fff]
[    0.009043] ACPI: Early table checksum verification disabled
[    0.009071] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.009073] ACPI: XSDT 0x000000008A08A0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009076] ACPI: FACP 0x000000008A0CA6B8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.009079] ACPI: DSDT 0x000000008A08A1F8 0404C0 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.009081] ACPI: FACS 0x000000008A523080 000040
[    0.009082] ACPI: APIC 0x000000008A0CA7D0 0000A0 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.009084] ACPI: FPDT 0x000000008A0CA870 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009085] ACPI: FIDT 0x000000008A0CA8B8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009087] ACPI: MCFG 0x000000008A0CA958 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.009088] ACPI: WSMT 0x000000008A0D7530 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009090] ACPI: SSDT 0x000000008A0CA9F0 001B1C (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.009092] ACPI: SSDT 0x000000008A0CC510 003099 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.009093] ACPI: HPET 0x000000008A0CF5B0 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.009095] ACPI: SSDT 0x000000008A0CF5E8 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[    0.009096] ACPI: SSDT 0x000000008A0D0598 002FD1 (v02 INTEL  xh_cfsd4 00000000 INTL 20160527)
[    0.009098] ACPI: UEFI 0x000000008A0D3570 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.009099] ACPI: LPIT 0x000000008A0D35B8 000094 (v01 ALASKA A M I    00000002      01000013)
[    0.009101] ACPI: SSDT 0x000000008A0D3650 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[    0.009102] ACPI: SSDT 0x000000008A0D5E30 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[    0.009104] ACPI: DBGP 0x000000008A0D7318 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.009105] ACPI: DBG2 0x000000008A0D7350 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.009107] ACPI: SSDT 0x000000008A0D73A8 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.009108] ACPI: WPBT 0x000000008A0D74F0 00003C (v01 ALASKA A M I    00000001 ASUS 00000001)
[    0.009114] ACPI: Local APIC address 0xfee00000
[    0.009403] No NUMA configuration found
[    0.009403] Faking a node at [mem 0x0000000000000000-0x000000046dffffff]
[    0.009406] NODE_DATA(0) allocated [mem 0x46dffb000-0x46dffffff]
[    0.009426] Zone ranges:
[    0.009427]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009428]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009428]   Normal   [mem 0x0000000100000000-0x000000046dffffff]
[    0.009429]   Device   empty
[    0.009429] Movable zone start for each node
[    0.009430] Early memory node ranges
[    0.009430]   node   0: [mem 0x0000000000001000-0x0000000000090fff]
[    0.009431]   node   0: [mem 0x0000000000100000-0x00000000886cffff]
[    0.009431]   node   0: [mem 0x000000008ad0f000-0x000000008ad0ffff]
[    0.009431]   node   0: [mem 0x0000000100000000-0x000000046dffffff]
[    0.009606] Zeroed struct page in unavailable ranges: 31135 pages
[    0.009606] Initmem setup node 0 [mem 0x0000000000001000-0x000000046dffffff]
[    0.009607] On node 0 totalpages: 4154977
[    0.009608]   DMA zone: 64 pages used for memmap
[    0.009608]   DMA zone: 21 pages reserved
[    0.009609]   DMA zone: 3984 pages, LIFO batch:0
[    0.009647]   DMA32 zone: 8668 pages used for memmap
[    0.009648]   DMA32 zone: 554705 pages, LIFO batch:63
[    0.016611]   Normal zone: 56192 pages used for memmap
[    0.016611]   Normal zone: 3596288 pages, LIFO batch:63
[    0.049522] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[    0.049784] ACPI: PM-Timer IO Port: 0x1808
[    0.049785] ACPI: Local APIC address 0xfee00000
[    0.049789] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.049790] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.049790] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.049790] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.049791] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.049791] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.049829] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.049830] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.049831] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.049832] ACPI: IRQ0 used by override.
[    0.049832] ACPI: IRQ9 used by override.
[    0.049833] Using ACPI (MADT) for SMP configuration information
[    0.049834] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.049836] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.049847] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.049848] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[    0.049848] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[    0.049848] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.049849] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.049850] PM: Registered nosave memory: [mem 0x886d0000-0x89f12fff]
[    0.049850] PM: Registered nosave memory: [mem 0x89f13000-0x8a0edfff]
[    0.049850] PM: Registered nosave memory: [mem 0x8a0ee000-0x8a523fff]
[    0.049851] PM: Registered nosave memory: [mem 0x8a524000-0x8ad0efff]
[    0.049851] PM: Registered nosave memory: [mem 0x8ad10000-0x8fffffff]
[    0.049852] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.049852] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.049852] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.049853] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.049853] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.049853] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.049854] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.049854] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.049854] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.049855] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.049855] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.049855] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.049857] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.049857] Booting paravirtualized kernel on bare hardware
[    0.049859] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.112663] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.112854] percpu: Embedded 53 pages/cpu s176984 r8192 d31912 u262144
[    0.112858] pcpu-alloc: s176984 r8192 d31912 u262144 alloc=1*2097152
[    0.112858] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.112873] Built 1 zonelists, mobility grouping on.  Total pages: 4090032
[    0.112874] Policy zone: Normal
[    0.112874] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-0.bpo.2-amd64 root=UUID=67add0dd-4cda-4b0f-993c-a77b5474fda1 ro quiet
[    0.117215] Calgary: detecting Calgary via BIOS EBDA area
[    0.117216] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.158055] Memory: 16227952K/16619908K available (10243K kernel code, 1186K rwdata, 3520K rodata, 1640K init, 2168K bss, 391956K reserved, 0K cma-reserved)
[    0.158137] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.158146] ftrace: allocating 32784 entries in 129 pages
[    0.166886] rcu: Hierarchical RCU implementation.
[    0.166887] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.166888] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.166888] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.169046] NR_IRQS: 33024, nr_irqs: 1536, preallocated irqs: 16
[    0.169430] random: crng done (trusting CPU's manufacturer)
[    0.171822] Console: colour VGA+ 80x25
[    0.171824] printk: console [tty0] enabled
[    0.171835] ACPI: Core revision 20190509
[    0.172175] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.172213] hpet clockevent registered
[    0.172264] APIC: Switch to symmetric I/O mode setup
[    0.173518] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.178330] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.196229] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[    0.196233] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=14784000)
[    0.196234] pid_max: default: 32768 minimum: 301
[    0.196252] LSM: Security Framework initializing
[    0.196255] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.196268] AppArmor: AppArmor initialized
[    0.196269] TOMOYO Linux initialized
[    0.198527] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.199714] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.199755] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.199795] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.199959] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.199975] process: using mwait in idle threads
[    0.199977] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.199977] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.199978] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.199978] Spectre V2 : Mitigation: Enhanced IBRS
[    0.199979] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.199980] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.199980] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.200145] Freeing SMP alternatives memory: 24K
[    0.208279] TSC deadline timer enabled
[    0.208284] smpboot: CPU0: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xd)
[    0.208350] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.208355] ... version:                4
[    0.208355] ... bit width:              48
[    0.208355] ... generic registers:      8
[    0.208356] ... value mask:             0000ffffffffffff
[    0.208356] ... max period:             00007fffffffffff
[    0.208356] ... fixed-purpose events:   3
[    0.208357] ... event mask:             00000007000000ff
[    0.208382] rcu: Hierarchical SRCU implementation.
[    0.208763] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.208797] smp: Bringing up secondary CPUs ...
[    0.208838] x86: Booting SMP configuration:
[    0.208838] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.209539] smp: Brought up 1 node, 6 CPUs
[    0.209539] smpboot: Max logical packages: 1
[    0.209539] smpboot: Total of 6 processors activated (44352.00 BogoMIPS)
[    0.212488] devtmpfs: initialized
[    0.212488] x86/mm: Memory block size: 128MB
[    0.212921] PM: Registering ACPI NVS region [mem 0x8a0ee000-0x8a523fff] (4415488 bytes)
[    0.212921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.212921] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.212921] pinctrl core: initialized pinctrl subsystem
[    0.212921] NET: Registered protocol family 16
[    0.212921] audit: initializing netlink subsys (disabled)
[    0.212921] audit: type=2000 audit(1568017173.044:1): state=initialized audit_enabled=0 res=1
[    0.212921] cpuidle: using governor ladder
[    0.212921] cpuidle: using governor menu
[    0.212921] KVM setup pv remote TLB flush
[    0.212921] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.212921] ACPI: bus type PCI registered
[    0.212921] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.212921] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.212921] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.212921] PCI: Using configuration type 1 for base access
[    0.212921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.212921] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.212921] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.300383] alg: No test for lzo-rle (lzo-rle-generic)
[    0.300383] alg: No test for lzo-rle (lzo-rle-scomp)
[    0.300383] ACPI: Added _OSI(Module Device)
[    0.300383] ACPI: Added _OSI(Processor Device)
[    0.300383] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.300383] ACPI: Added _OSI(Processor Aggregator Device)
[    0.300383] ACPI: Added _OSI(Linux-Dell-Video)
[    0.300383] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.300383] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.340802] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.345948] ACPI: Dynamic OEM Table Load:
[    0.345951] ACPI: SSDT 0xFFFF89909B479B00 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.346140] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.346992] ACPI: Dynamic OEM Table Load:
[    0.346995] ACPI: SSDT 0xFFFF89909B112400 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.347238] ACPI: Dynamic OEM Table Load:
[    0.347241] ACPI: SSDT 0xFFFF89909B466000 0006EC (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.347535] ACPI: Dynamic OEM Table Load:
[    0.347537] ACPI: SSDT 0xFFFF89909B0F5400 000133 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.347709] ACPI: Dynamic OEM Table Load:
[    0.347712] ACPI: SSDT 0xFFFF89909B467800 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.348052] ACPI: Dynamic OEM Table Load:
[    0.348054] ACPI: SSDT 0xFFFF89909B462800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.352317] ACPI: Dynamic OEM Table Load:
[    0.352321] ACPI: SSDT 0xFFFF89909B199800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.352599] ACPI: Dynamic OEM Table Load:
[    0.352603] ACPI: SSDT 0xFFFF89909B225000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.353141] ACPI: Dynamic OEM Table Load:
[    0.353144] ACPI: SSDT 0xFFFF89909B19AC00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.355410] ACPI: Interpreter enabled
[    0.355439] ACPI: (supports S0 S3 S4 S5)
[    0.355440] ACPI: Using IOAPIC for interrupt routing
[    0.355467] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.356119] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.365149] ACPI: Power Resource [USBC] (on)
[    0.367096] ACPI: Power Resource [V0PR] (on)
[    0.367366] ACPI: Power Resource [V1PR] (on)
[    0.367627] ACPI: Power Resource [V2PR] (on)
[    0.371472] ACPI: Power Resource [WRST] (on)
[    0.374618] ACPI: Power Resource [FN00] (off)
[    0.374668] ACPI: Power Resource [FN01] (off)
[    0.374714] ACPI: Power Resource [FN02] (off)
[    0.374762] ACPI: Power Resource [FN03] (off)
[    0.374808] ACPI: Power Resource [FN04] (off)
[    0.375291] ACPI: Power Resource [PIN] (off)
[    0.375570] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.375574] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.375680] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.375778] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.375778] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.376439] PCI host bridge to bus 0000:00
[    0.376440] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.376441] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.376442] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.376442] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.376443] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.376444] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.376449] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[    0.376701] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000
[    0.376708] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    0.376712] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.376714] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.376890] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.376907] pci 0000:00:14.0: reg 0x10: [mem 0xa1120000-0xa112ffff 64bit]
[    0.376956] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.377237] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.377256] pci 0000:00:14.2: reg 0x10: [mem 0xa1136000-0xa1137fff 64bit]
[    0.377267] pci 0000:00:14.2: reg 0x18: [mem 0xa113c000-0xa113cfff 64bit]
[    0.377398] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.377423] pci 0000:00:16.0: reg 0x10: [mem 0xa113b000-0xa113bfff 64bit]
[    0.377498] pci 0000:00:16.0: PME# supported from D3hot
[    0.377660] pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
[    0.377674] pci 0000:00:17.0: reg 0x10: [mem 0xa1134000-0xa1135fff]
[    0.377679] pci 0000:00:17.0: reg 0x14: [mem 0xa113a000-0xa113a0ff]
[    0.377685] pci 0000:00:17.0: reg 0x18: [io  0x3090-0x3097]
[    0.377690] pci 0000:00:17.0: reg 0x1c: [io  0x3080-0x3083]
[    0.377696] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.377701] pci 0000:00:17.0: reg 0x24: [mem 0xa1139000-0xa11397ff]
[    0.377732] pci 0000:00:17.0: PME# supported from D3hot
[    0.377852] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[    0.377924] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.378083] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[    0.378153] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.378310] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    0.378382] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.378542] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[    0.378795] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    0.378839] pci 0000:00:1f.3: reg 0x10: [mem 0xa1130000-0xa1133fff 64bit]
[    0.378886] pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[    0.378964] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.379457] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.379474] pci 0000:00:1f.4: reg 0x10: [mem 0xa1138000-0xa11380ff 64bit]
[    0.379500] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.379613] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.379627] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.379746] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[    0.379781] pci 0000:00:1f.6: reg 0x10: [mem 0xa1100000-0xa111ffff]
[    0.379922] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.380066] acpiphp: Slot [1] registered
[    0.380074] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.380133] acpiphp: Slot [1-1] registered
[    0.380141] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.380199] acpiphp: Slot [1-2] registered
[    0.380202] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.381189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.381244] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[    0.381297] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.381350] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.381402] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.381455] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.381507] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.381559] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.382013] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.382013] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.382013] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.382013] vgaarb: loaded
[    0.382013] EDAC MC: Ver: 3.0.0
[    0.382013] PCI: Using ACPI for IRQ routing
[    0.425149] PCI: pci_cache_line_size set to 64 bytes
[    0.425206] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[    0.425207] e820: reserve RAM buffer [mem 0x886d0000-0x8bffffff]
[    0.425207] e820: reserve RAM buffer [mem 0x8ad10000-0x8bffffff]
[    0.425208] e820: reserve RAM buffer [mem 0x46e000000-0x46fffffff]
[    0.425320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.425322] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.427372] clocksource: Switched to clocksource tsc-early
[    0.430943] VFS: Disk quotas dquot_6.6.0
[    0.430953] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.431023] AppArmor: AppArmor Filesystem Enabled
[    0.431032] pnp: PnP ACPI init
[    0.431098] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.431101] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.431216] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.431218] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.431585] pnp 00:02: [dma 0 disabled]
[    0.431606] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.431673] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.431675] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.431746] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.431748] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.431850] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.431851] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.431852] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.431853] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.431853] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.431854] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.431855] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.431855] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.431857] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.432002] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    0.432003] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.432004] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.432004] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.432005] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.432006] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.432007] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.432008] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.432203] system 00:07: [io  0x2000-0x20fe] has been reserved
[    0.432205] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.432965] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.432965] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.432966] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.432967] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.432969] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.433540] pnp: PnP ACPI: found 9 devices
[    0.438708] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.438712] pci 0000:00:1b.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.438713] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.438714] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.438715] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.438716] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.438716] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.438720] pci 0000:00:1b.0: BAR 14: assigned [mem 0xa1200000-0xa13fffff]
[    0.438723] pci 0000:00:1b.0: BAR 15: assigned [mem 0xa1400000-0xa15fffff 64bit pref]
[    0.438724] pci 0000:00:1d.0: BAR 14: assigned [mem 0xa1600000-0xa17fffff]
[    0.438726] pci 0000:00:1d.0: BAR 15: assigned [mem 0xa1800000-0xa19fffff 64bit pref]
[    0.438727] pci 0000:00:1b.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.438728] pci 0000:00:1d.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.438729] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.438736] pci 0000:00:1b.0:   bridge window [io  0x4000-0x4fff]
[    0.438739] pci 0000:00:1b.0:   bridge window [mem 0xa1200000-0xa13fffff]
[    0.438741] pci 0000:00:1b.0:   bridge window [mem 0xa1400000-0xa15fffff 64bit pref]
[    0.438744] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.438753] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.438756] pci 0000:00:1d.0:   bridge window [io  0x5000-0x5fff]
[    0.438758] pci 0000:00:1d.0:   bridge window [mem 0xa1600000-0xa17fffff]
[    0.438760] pci 0000:00:1d.0:   bridge window [mem 0xa1800000-0xa19fffff 64bit pref]
[    0.438764] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.438765] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.438766] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.438766] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.438767] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.438767] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.438768] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa13fffff]
[    0.438768] pci_bus 0000:01: resource 2 [mem 0xa1400000-0xa15fffff 64bit pref]
[    0.438769] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.438770] pci_bus 0000:03: resource 1 [mem 0xa1600000-0xa17fffff]
[    0.438770] pci_bus 0000:03: resource 2 [mem 0xa1800000-0xa19fffff 64bit pref]
[    0.438862] NET: Registered protocol family 2
[    0.438942] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.438973] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.439110] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.439242] TCP: Hash tables configured (established 131072 bind 65536)
[    0.439266] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.439306] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.439361] NET: Registered protocol family 1
[    0.439363] NET: Registered protocol family 44
[    0.439368] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.458038] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x643 took 18226 usecs
[    0.458073] PCI: CLS 64 bytes, default 64
[    0.458097] Trying to unpack rootfs image as initramfs...
[    0.849341] Freeing initrd memory: 37748K
[    0.849352] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.849353] software IO TLB: mapped [mem 0x846d0000-0x886d0000] (64MB)
[    0.849375] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[    0.849393] clocksource: Switched to clocksource tsc
[    0.849422] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.849847] Initialise system trusted keyrings
[    0.849851] Key type blacklist registered
[    0.849879] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.850617] zbud: loaded
[    0.850787] Platform Keyring initialized
[    0.850788] Key type asymmetric registered
[    0.850789] Asymmetric key parser 'x509' registered
[    0.850794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.850818] io scheduler mq-deadline registered
[    0.851104] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.851112] intel_idle: MWAIT substates: 0x11142120
[    0.851113] intel_idle: v0.4.1 model 0x9E
[    0.851415] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.852298] thermal LNXTHERM:00: registered as thermal_zone0
[    0.852298] ACPI: Thermal Zone [TZ00] (28 C)
[    0.852367] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.873496] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.873829] Linux agpgart interface v0.103
[    0.873852] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.873852] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.874087] i8042: PNP: No PS/2 controller found.
[    0.874111] mousedev: PS/2 mouse device common for all mice
[    0.874135] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.874693] rtc_cmos rtc_cmos: registered as rtc0
[    0.874701] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.874705] intel_pstate: Intel P-state driver initializing
[    0.874957] intel_pstate: HWP enabled
[    0.875242] ledtrig-cpu: registered to indicate activity on CPUs
[    0.875495] NET: Registered protocol family 10
[    0.880726] Segment Routing with IPv6
[    0.880737] mip6: Mobile IPv6
[    0.880738] NET: Registered protocol family 17
[    0.880802] mpls_gso: MPLS GSO support
[    0.881170] mce: Using 12 MCE banks
[    0.881191] microcode: sig=0x906ed, pf=0x2, revision=0xb8
[    0.881300] microcode: Microcode Update Driver: v2.2.
[    0.881305] sched_clock: Marking stable (882330524, -1167683)->(895148233, -13985392)
[    0.881686] registered taskstats version 1
[    0.881686] Loading compiled-in X.509 certificates
[    0.899203] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.899211] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    0.899219] zswap: loaded using pool lzo/zbud
[    0.899419] AppArmor: AppArmor sha1 policy hashing enabled
[    0.900781] rtc_cmos rtc_cmos: setting system clock to 2019-09-09T08:19:33 UTC (1568017173)
[    0.901416] Freeing unused kernel image memory: 1640K
[    0.932324] Write protecting the kernel read-only data: 16384k
[    0.932777] Freeing unused kernel image memory: 2036K
[    0.932847] Freeing unused kernel image memory: 576K
[    0.938491] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.938494] Run /init as init process
[    1.026774] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.026780] ACPI: Sleep Button [SLPB]
[    1.026805] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.026808] ACPI: Power Button [PWRB]
[    1.026829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.026835] ACPI: Power Button [PWRF]
[    1.029044] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.029067] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.029108] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.032344] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.032392] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.032986] pps_core: LinuxPPS API ver. 1 registered
[    1.032986] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.033492] PTP clock support registered
[    1.035716] SCSI subsystem initialized
[    1.036981] ACPI: bus type USB registered
[    1.036991] usbcore: registered new interface driver usbfs
[    1.036995] usbcore: registered new interface driver hub
[    1.037010] usbcore: registered new device driver usb
[    1.038347] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.038347] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.038492] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.041153] libata version 3.00 loaded.
[    1.042594] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.042597] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.042996] ahci 0000:00:17.0: version 3.0
[    1.043059] ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
[    1.043643] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.043646] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.043758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    1.043758] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.043759] usb usb1: Product: xHCI Host Controller
[    1.043759] usb usb1: Manufacturer: Linux 5.2.0-0.bpo.2-amd64 xhci-hcd
[    1.043760] usb usb1: SerialNumber: 0000:00:14.0
[    1.044082] hub 1-0:1.0: USB hub found
[    1.044096] hub 1-0:1.0: 16 ports detected
[    1.044822] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.044824] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.044825] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.044841] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    1.044841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.044842] usb usb2: Product: xHCI Host Controller
[    1.044842] usb usb2: Manufacturer: Linux 5.2.0-0.bpo.2-amd64 xhci-hcd
[    1.044843] usb usb2: SerialNumber: 0000:00:14.0
[    1.044924] hub 2-0:1.0: USB hub found
[    1.044935] hub 2-0:1.0: 10 ports detected
[    1.053168] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl RAID mode
[    1.053169] ahci 0000:00:17.0: flags: 64bit ncq led clo only pio slum part ems deso sadm sds apst
[    1.079861] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.081216] Console: switching to colour dummy device 80x25
[    1.082258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.082258] [drm] Driver supports precise vblank timestamp query.
[    1.082648] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.082674] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[    1.082918] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.088519] scsi host0: ahci
[    1.088577] scsi host1: ahci
[    1.088619] scsi host2: ahci
[    1.088664] scsi host3: ahci
[    1.088699] ata1: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139100 irq 124
[    1.088700] ata2: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139180 irq 124
[    1.088701] ata3: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139200 irq 124
[    1.088702] ata4: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139280 irq 124
[    1.313892] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.355193] [drm] failed to retrieve link info, disabling eDP
[    1.370675] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[    1.371827] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.371967] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.388352] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.399176] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 04:d4:c4:02:92:69
[    1.399177] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.399373] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    1.399894] e1000e 0000:00:1f.6 eno1: renamed from eth0
[    1.402772] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.402983] ata4: SATA link down (SStatus 4 SControl 300)
[    1.403167] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.403382] ata3: SATA link down (SStatus 4 SControl 300)
[    1.403870] ata2.00: ATA-8: ST1000VX005-2EZ102, CV11, max UDMA/133
[    1.403871] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.404894] ata2.00: configured for UDMA/133
[    1.404992] ata1.00: supports DRM functions and may not be fully accessible
[    1.406060] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT03B6Q, max UDMA/133
[    1.406061] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.408679] ata1.00: supports DRM functions and may not be fully accessible
[    1.409242] usb 2-2: New USB device found, idVendor=152d, idProduct=8561, bcdDevice= 1.07
[    1.409243] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    1.409243] usb 2-2: Product: JMS56x Series
[    1.409244] usb 2-2: Manufacturer: JMicron
[    1.409244] usb 2-2: SerialNumber: 00A1234568D8
[    1.409256] fbcon: i915drmfb (fb0) is primary device
[    1.411686] ata1.00: configured for UDMA/133
[    1.411825] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  3B6Q PQ: 0 ANSI: 5
[    1.412152] scsi 1:0:0:0: Direct-Access     ATA      ST1000VX005-2EZ1 CV11 PQ: 0 ANSI: 5
[    1.413003] usbcore: registered new interface driver usb-storage
[    1.416281] scsi host4: uas
[    1.416321] usbcore: registered new interface driver uas
[    1.416784] scsi 4:0:0:0: Direct-Access     WDC WD10 EURX-63UY4Y0     0107 PQ: 0 ANSI: 6
[    1.426890] Console: switching to colour frame buffer device 240x67
[    1.445924] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    1.463522] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.463524] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.463533] ata1.00: Enabling discard_zeroes_data
[    1.463536] sd 1:0:0:0: [sdb] Write Protect is off
[    1.463537] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.463549] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.463567] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.463572] sd 0:0:0:0: [sda] Write Protect is off
[    1.463573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.463578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.463722] ata1.00: Enabling discard_zeroes_data
[    1.464072]  sda: sda1 sda2
[    1.464239] ata1.00: Enabling discard_zeroes_data
[    1.464435] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.464652] sd 4:0:0:0: [sdc] Write Protect is off
[    1.464653] sd 4:0:0:0: [sdc] Mode Sense: 67 00 10 08
[    1.465083] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    1.465218] sd 0:0:0:0: [sda] supports TCG Opal
[    1.465219] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.465439] sd 4:0:0:0: [sdc] Optimal transfer size 33553920 bytes
[    1.483825]  sdc: sdc1
[    1.484876]  sdb: sdb1 sdb2 sdb3
[    1.485543] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.485776] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.536307] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.685723] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    1.685728] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.685731] usb 1-1: Product: USB2.0 Hub
[    1.687016] hub 1-1:1.0: USB hub found
[    1.687336] hub 1-1:1.0: 4 ports detected
[    1.980332] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd
[    2.023046] PM: Image not found (code -22)
[    2.084744] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    2.084746] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.084748] usb 1-1.3: Product: USB Optical Mouse
[    2.084749] usb 1-1.3: Manufacturer: Logitech
[    2.093168] hidraw: raw HID events driver (C) Jiri Kosina
[    2.099162] usbcore: registered new interface driver usbhid
[    2.099163] usbhid: USB HID core driver
[    2.100113] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C077.0001/input/input4
[    2.100153] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1.3/input0
[    2.103838] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.134083] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    2.172265] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
[    2.218556] systemd[1]: Inserted module 'autofs4'
[    2.241464] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.260405] systemd[1]: Detected architecture x86-64.
[    2.264549] systemd[1]: Set hostname to <DEB-1151>.
[    2.264777] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    2.287887] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30
[    2.287888] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.287889] usb 1-1.4: Product: HP Basic USB Keyboard
[    2.287889] usb 1-1.4: Manufacturer: CHICONY
[    2.297692] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:0024.0002/input/input5
[    2.315697] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
[    2.323346] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[    2.325944] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[    2.327773] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[    2.340137] systemd[1]: Listening on Journal Socket.
[    2.340192] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.350161] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.356373] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-1.4/input0
[    2.365626] lp: driver loaded but no devices found
[    2.365698] RPC: Registered named UNIX socket transport module.
[    2.365698] RPC: Registered udp transport module.
[    2.365699] RPC: Registered tcp transport module.
[    2.365699] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.367540] ppdev: user-space parallel port driver
[    2.385130] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.389873] systemd-journald[291]: Received request to flush runtime journal from PID 1
[    2.476990] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.477734] iTCO_vendor_support: vendor-support=0
[    2.477794] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.477978] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.479736] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.480101] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.480142] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[    2.480164] iTCO_wdt: probe of iTCO_wdt failed with error -16
[    2.481833] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.481834] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.481834] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.481835] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.481835] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.481835] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.482418] asus_wmi: ASUS WMI generic driver loaded
[    2.487901] asus_wmi: Initialization: 0x0
[    2.487919] asus_wmi: BIOS WMI version: 0.9
[    2.487987] asus_wmi: SFUN value: 0x0
[    2.488468] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[    2.488563] asus_wmi: Number of fans: 1
[    2.492210] cryptd: max_cpu_qlen set to 1000
[    2.505757] AVX2 version of gcm_enc/dec engaged.
[    2.505758] AES CTR mode by8 optimization enabled
[    2.510152] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.536626] Adding 19347452k swap on /dev/sda2.  Priority:-2 extents:1 across:19347452k SSFS
[    2.538877] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.538878] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[    2.538879] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.538879] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.538879] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    2.538880] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.538880] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.538881] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.538881] snd_hda_codec_realtek hdaudioC0D0:      Line=0x15
[    2.564116] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    2.564149] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    2.564173] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    2.564195] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    2.564259] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    2.564289] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    2.564311] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    2.564331] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    2.564354] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    2.564380] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    2.657610] kvm: disabled by bios
[    2.722023] kvm: disabled by bios
[    2.768643] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: resuid=0
[    2.789471] kvm: disabled by bios
[    2.869371] kvm: disabled by bios
[    2.915006] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    2.933729] kvm: disabled by bios
[    2.969973] audit: type=1400 audit(1568017175.563:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=674 comm="apparmor_parser"
[    2.970651] audit: type=1400 audit(1568017175.563:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=676 comm="apparmor_parser"
[    2.970672] audit: type=1400 audit(1568017175.563:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mdnsd" pid=673 comm="apparmor_parser"
[    2.971285] audit: type=1400 audit(1568017175.563:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dnsmasq" pid=675 comm="apparmor_parser"
[    2.971288] audit: type=1400 audit(1568017175.563:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dnsmasq//libvirt_leaseshelper" pid=675 comm="apparmor_parser"
[    2.971461] audit: type=1400 audit(1568017175.563:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/apt-cacher-ng" pid=677 comm="apparmor_parser"
[    2.973028] audit: type=1400 audit(1568017175.567:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=678 comm="apparmor_parser"
[    2.973031] audit: type=1400 audit(1568017175.567:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=678 comm="apparmor_parser"
[    2.973033] audit: type=1400 audit(1568017175.567:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=678 comm="apparmor_parser"
[    3.029355] kvm: disabled by bios
[    3.032144] intel_rapl: Found RAPL domain package
[    3.032144] intel_rapl: Found RAPL domain core
[    3.032145] intel_rapl: Found RAPL domain uncore
[    3.032145] intel_rapl: Found RAPL domain dram
[    3.140856] vboxdrv: loading out-of-tree module taints kernel.
[    3.148372] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.161031] vboxdrv: Found 6 processor cores
[    3.180710] vboxdrv: TSC mode is Invariant, tentative frequency 3696002678 Hz
[    3.180712] vboxdrv: Successfully loaded version 6.0.12 (interface 0x00290008)
[    3.413381] VBoxNetFlt: Successfully started.
[    3.419974] VBoxNetAdp: Successfully started.
[    3.427645] VBoxPciLinuxInit
[    3.470081] vboxpci: IOMMU not found (not registered)
[    4.179583] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    4.179836] NFSD: Using legacy client tracking operations.
[    4.179840] NFSD: starting 90-second grace period (net f0000098)
[    5.931746] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    5.931754] e1000e 0000:00:1f.6 eno1: 10/100 speed: disabling TSO
[    5.931864] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[    6.113697] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[  323.585095] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[  343.412400] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[  343.415718] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 1380.857281] usb 2-2: USB disconnect, device number 2
[ 1380.858427] sd 4:0:0:0: [sdc] Synchronizing SCSI cache
[ 1381.117304] sd 4:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1381.217493] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:9929:b6f6:6f27:27eb DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=208488 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1381.217538] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:9929:b6f6:6f27:27eb DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=530836 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1381.217566] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=34691 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1381.217591] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=781002 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1381.217619] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=275409 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1381.217672] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=519870 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1381.227930] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:9929:b6f6:6f27:27eb DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=208488 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1381.227965] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:9929:b6f6:6f27:27eb DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=530836 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1381.227991] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=34691 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1381.228016] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=781002 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1398.698384] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1398.719279] usb 2-2: New USB device found, idVendor=152d, idProduct=8561, bcdDevice= 1.07
[ 1398.719281] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 1398.719283] usb 2-2: Product: JMS56x Series
[ 1398.719284] usb 2-2: Manufacturer: JMicron
[ 1398.719285] usb 2-2: SerialNumber: 00A1234568D8
[ 1398.723213] scsi host4: uas
[ 1398.723949] scsi 4:0:0:0: Direct-Access     WDC WD50 00LPCX-00VHAT0   0107 PQ: 0 ANSI: 6
[ 1398.725270] scsi 4:0:0:1: Direct-Access     WDC WD10 EURX-63UY4Y0     0107 PQ: 0 ANSI: 6
[ 1398.726121] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1398.726531] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 1398.727729] sd 4:0:0:1: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1398.727945] sd 4:0:0:1: [sdd] Write Protect is off
[ 1398.727948] sd 4:0:0:1: [sdd] Mode Sense: 67 00 10 08
[ 1398.728327] sd 4:0:0:1: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1398.728689] sd 4:0:0:1: [sdd] Optimal transfer size 33553920 bytes
[ 1398.735872]  sdd: sdd1
[ 1398.736673] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1398.736939] sd 4:0:0:0: [sdc] Write Protect is off
[ 1398.736943] sd 4:0:0:0: [sdc] Mode Sense: 67 00 10 08
[ 1398.737506] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1398.738022] sd 4:0:0:0: [sdc] Optimal transfer size 33553920 bytes
[ 1398.738860] sd 4:0:0:1: [sdd] Attached SCSI disk
[ 1398.790748]  sdc: sdc1
[ 1398.825134] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 3802.318686] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)

 

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

Bonjour

je comprend pas ta question
pour buster le noyau actuel en stable sans backports => https://packages.debian.org/buster/linu … .0-5-amd64

uname -a
 

Linux debian11 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5+deb10u2 (2019-08-08) x86_64 GNU/Linux
 

je suis sur une machine en 1150  => https://www.asus.com/Motherboards/H81MP … fications/
la version de debian

cat /etc/os-release
 

PRETTY_NAME="Debian GNU/Linux 10 (buster)"
NAME="Debian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
 

je vois pas pourquoi ton dmesg affiche

Linux version 5.2.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6))
 #1 SMP Debian 5.2.9-2~bpo10+1 (2019-08-25)
 

il sort d'ou ce noyau ?

pour stretch tu a juste a activer les backports sur ton sources.list et a faire

apt-get --reinstall install -t stretch-backports linux-image-amd64 linux-headers-amd64
 

le 5.2.9 actuellement est sur testing et sur les backports de buster.
ta machine n'a pas besoin d un noyau aussi récent
j'ai un doute sur l'intégrité de ta debian    (stretch ou buster on sait pas trop )

a moins que tu ai un cpu moyen , mais moi c'est fluide avec un 4770 en 1150 et buster

melissa6969

Banni(e)

Inscription : 30-11-2016

Re : Stretch : pas de carte réseau détectée.

C'est un i5 9600k qu'il a.
Du coup ça devrait être très fluide le système surtout avec xfce qui est light.....

Le kernel des backports posent peut-être problème sur buster.
A voir en gardant le kernel officiel de buster (le 4.19)

Debian s'alourdit peut-être un peu entre chaque nouvelle release, mais de là à rendre un pc ultra lent, hormis un pc entrée de gamme je pourrais comprendre.. mais là, c'est incompréhensible..
En + tu es sur un SSD Samsung Evo 860, donc la lenteur est clairement anormale...
Ton soucis a pas l'air matériel mais + logiciel non.??

Vu que sous stretch tout va bien et que sous buster ça foire,  le problème vient pas du matériel.
Sous buster tout est reconnu puisque c'est le cas sous stretch déjà (pour ton pc)
Du coup tu es sous buster avec les backports activé, c'est ça.??

Que donne le retour de cette commande ??

lsb_release -a

Edit à toto : Mis la commande user en utilisant Commande user du BBCode du forum. Plus lisible par tous ainsi.

Dernière modification par melissa6969 (09-09-2019 12:26:56)

---

Quamdiu est spes est, Est vitae.
Fiet in posterum melius

Lupa

Membre

Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster

Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd

(G)UI : xfce

Inscription : 28-06-2017

Re : Stretch : pas de carte réseau détectée.

Bonsoir

Je commence à y voir plus clair... Je l'ai sans doute mal installé. Il démarre un peu comme mon serveur, et à l'arrêt aussi : OK en vert, etc... Bizarre. Je n'ai pas ça sous Stretch.
N'empêche que vous avez eu raison de me faire reformater bas niveau le HD.

Ce matos est et très récent et très performant. En live, sous CloneZilla, c'est impressionnant : près de 10 Go /mn.

Paquet installé depuis les backports (avec dpkg) :
linux-image-amd64_5.2+106~bpo10+1_amd64

uname -a

Linux DEB-1151 5.2.0-0.bpo.2-amd64 #1 SMP Debian 5.2.9-2~bpo10+1 (2019-08-25) x86_64 GNU/Linux

cat /etc/os-release

PRETTY_NAME="Debian GNU/Linux 10 (buster)"
NAME="Debian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
 

root@DEB-1151:~#

lsb_release -a

No LSB modules are available.
Distributor ID: Debian
Description:  Debian GNU/Linux 10 (buster)
Release:  10
Codename: buster
 

C'est donc bien logiciel ?
Hier soir, j'ai connecté un dd  d'1 To en USB3, via une rallonge "alimentée", pas une rallonge classique. La panique, Bon sang !!
Qu'en pensez-vous ? Une bonne réinstall ?


Edit à toto : mis en forme les commandes user et leurs retours respectifs.

anonyme

Invité

Re : Stretch : pas de carte réseau détectée.

Bonsoir
c'est du 1151 le i5 9600k et pas du 1150 comme indiqué sur son #21.
que ça fonctionne sous stretch mieux que sous buster je suis étonné mais bon ..........
la carte mère doit être en 370/390 comme chipset
je vois pas du tout pourquoi on parle de stretch avec un noyau 5.2 et de socket 1150